Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6

1 files changed, 21 insertions, 54 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fc20fdc0f7f2..e5deee2dfcfe 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -150,7 +150,10 @@ config ARCH_HAS_CACHE_LINE_SIZE
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
-config HAVE_DYNAMIC_PER_CPU_AREA
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
 	def_bool y
 
 config HAVE_CPUMASK_OF_CPU_MAP
@@ -179,6 +182,10 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config HAVE_INTEL_TXT
+	def_bool y
+	depends on EXPERIMENTAL && DMAR && ACPI
+
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
 	bool
@@ -776,41 +783,17 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	  increased on these systems.
 
 config X86_MCE
-	bool "Machine Check Exception"
+	bool "Machine Check / overheating reporting"
 	---help---
-	  Machine Check Exception support allows the processor to notify the
-	  kernel if it detects a problem (e.g. overheating, component failure).
+	  Machine Check support allows the processor to notify the
+	  kernel if it detects a problem (e.g. overheating, data corruption).
 	  The action the kernel takes depends on the severity of the problem,
-	  ranging from a warning message on the console, to halting the machine.
-	  Your processor must be a Pentium or newer to support this - check the
-	  flags in /proc/cpuinfo for mce.  Note that some older Pentium systems
-	  have a design flaw which leads to false MCE events - hence MCE is
-	  disabled on all P5 processors, unless explicitly enabled with "mce"
-	  as a boot argument.  Similarly, if MCE is built in and creates a
-	  problem on some new non-standard machine, you can boot with "nomce"
-	  to disable it.  MCE support simply ignores non-MCE processors like
-	  the 386 and 486, so nearly everyone can say Y here.
-
-config X86_OLD_MCE
-	depends on X86_32 && X86_MCE
-	bool "Use legacy machine check code (will go away)"
-	default n
-	select X86_ANCIENT_MCE
-	---help---
-	  Use the old i386 machine check code. This is merely intended for
-	  testing in a transition period. Try this if you run into any machine
-	  check related software problems, but report the problem to
-	  linux-kernel.  When in doubt say no.
-
-config X86_NEW_MCE
-	depends on X86_MCE
-	bool
-	default y if (!X86_OLD_MCE && X86_32) || X86_64
+	  ranging from warning messages to halting the machine.
 
 config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@@ -818,14 +801,14 @@ config X86_MCE_INTEL
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
 config X86_ANCIENT_MCE
 	def_bool n
-	depends on X86_32
+	depends on X86_32 && X86_MCE
 	prompt "Support for old Pentium 5 / WinChip machine checks"
 	---help---
 	  Include support for machine check handling on old Pentium 5 or WinChip
@@ -838,36 +821,16 @@ config X86_MCE_THRESHOLD
 	default y
 
 config X86_MCE_INJECT
-	depends on X86_NEW_MCE
+	depends on X86_MCE
 	tristate "Machine check injector support"
 	---help---
 	  Provide support for injecting machine checks for testing purposes.
 	  If you don't know what a machine check is and you don't do kernel
 	  QA it is safe to say n.
 
-config X86_MCE_NONFATAL
-	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_OLD_MCE
-	---help---
-	  Enabling this feature starts a timer that triggers every 5 seconds which
-	  will look at the machine check registers to see if anything happened.
-	  Non-fatal problems automatically get corrected (but still logged).
-	  Disable this if you don't want to see these messages.
-	  Seeing the messages this option prints out may be indicative of dying
-	  or out-of-spec (ie, overclocked) hardware.
-	  This option only does something on certain CPUs.
-	  (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
-	bool "check for P4 thermal throttling interrupt."
-	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
-	---help---
-	  Enabling this feature will cause a message to be printed when the P4
-	  enters thermal throttling.
-
 config X86_THERMAL_VECTOR
 	def_bool y
-	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+	depends on X86_MCE_INTEL
 
 config VM86
 	bool "Enable VM86 support" if EMBEDDED
@@ -1413,6 +1376,10 @@ config X86_PAT
 
 	  If unsure, say Y.
 
+config ARCH_USES_PG_UNCACHED
+	def_bool y
+	depends on X86_PAT
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI