Merge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
  here, just lots of driver updates and some core tty layer fixes as
  well.  All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: 8250: Fix UART_BUG_TXEN workaround
  serial: driver for ETRAX FS UART
  tty: remove unused variable sprop
  serial: of-serial: fetch line number from DT
  serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
  tty/serial: serial8250_set_divisor() can be static
  tty/serial: Add Spreadtrum sc9836-uart driver support
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  serial: samsung: remove redundant interrupt enabling
  tty: Remove external interface for tty_set_termios()
  serial: omap: Fix RTS handling
  serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
  serial: core: Rework hw-assisted flow control support
  tty/serial: 8250_early: Add support for PXA UARTs
  tty/serial: of_serial: add support for PXA/MMP uarts
  tty/serial: of_serial: add DT alias ID handling
  serial: 8250: Prevent concurrent updates to shadow registers
  serial: 8250: Use canary to restart console after suspend
  serial: 8250: Refactor XR17V35X divisor calculation
  serial: 8250: Refactor divisor programming
  ...

3 files changed, 4 insertions, 253 deletions

diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
index af9307f2cc28..91ec9f8704bf 100644
--- a/arch/x86/platform/intel-mid/device_libs/Makefile
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -16,8 +16,6 @@ obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
 obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
 obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
-# SPI Devices
-obj-$(subst m,y,$(CONFIG_SERIAL_MRST_MAX3110)) += platform_max3111.o
 # MISC Devices
 obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max3111.c b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
deleted file mode 100644
index afd1df94e0e5..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * platform_max3111.c: max3111 platform data initilization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <asm/intel-mid.h>
-
-static void __init *max3111_platform_data(void *info)
-{
-	struct spi_board_info *spi_info = info;
-	int intr = get_gpio_by_name("max3111_int");
-
-	spi_info->mode = SPI_MODE_0;
-	if (intr == -1)
-		return NULL;
-	spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	return NULL;
-}
-
-static const struct devs_id max3111_dev_id __initconst = {
-	.name = "spi_max3111",
-	.type = SFI_DEV_TYPE_SPI,
-	.get_platform_data = &max3111_platform_data,
-};
-
-sfi_device(max3111_dev_id);
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
index e0bd082a80e0..4e720829ab90 100644
--- a/arch/x86/platform/intel-mid/early_printk_intel_mid.c
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -10,15 +10,13 @@
  */
 
 /*
- * This file implements two early consoles named mrst and hsu.
- * mrst is based on Maxim3110 spi-uart device, it exists in both
- * Moorestown and Medfield platforms, while hsu is based on a High
- * Speed UART device which only exists in the Medfield platform
+ * This file implements early console named hsu.
+ * hsu is based on a High Speed UART device which only exists in the Medfield
+ * platform
  */
 
 #include <linux/serial_reg.h>
 #include <linux/serial_mfd.h>
-#include <linux/kmsg_dump.h>
 #include <linux/console.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
@@ -28,216 +26,6 @@
 #include <asm/pgtable.h>
 #include <asm/intel-mid.h>
 
-#define MRST_SPI_TIMEOUT		0x200000
-#define MRST_REGBASE_SPI0		0xff128000
-#define MRST_REGBASE_SPI1		0xff128400
-#define MRST_CLK_SPI0_REG		0xff11d86c
-
-/* Bit fields in CTRLR0 */
-#define SPI_DFS_OFFSET			0
-
-#define SPI_FRF_OFFSET			4
-#define SPI_FRF_SPI			0x0
-#define SPI_FRF_SSP			0x1
-#define SPI_FRF_MICROWIRE		0x2
-#define SPI_FRF_RESV			0x3
-
-#define SPI_MODE_OFFSET			6
-#define SPI_SCPH_OFFSET			6
-#define SPI_SCOL_OFFSET			7
-#define SPI_TMOD_OFFSET			8
-#define	SPI_TMOD_TR			0x0		/* xmit & recv */
-#define SPI_TMOD_TO			0x1		/* xmit only */
-#define SPI_TMOD_RO			0x2		/* recv only */
-#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
-
-#define SPI_SLVOE_OFFSET		10
-#define SPI_SRL_OFFSET			11
-#define SPI_CFS_OFFSET			12
-
-/* Bit fields in SR, 7 bits */
-#define SR_MASK				0x7f		/* cover 7 bits */
-#define SR_BUSY				(1 << 0)
-#define SR_TF_NOT_FULL			(1 << 1)
-#define SR_TF_EMPT			(1 << 2)
-#define SR_RF_NOT_EMPT			(1 << 3)
-#define SR_RF_FULL			(1 << 4)
-#define SR_TX_ERR			(1 << 5)
-#define SR_DCOL				(1 << 6)
-
-struct dw_spi_reg {
-	u32	ctrl0;
-	u32	ctrl1;
-	u32	ssienr;
-	u32	mwcr;
-	u32	ser;
-	u32	baudr;
-	u32	txfltr;
-	u32	rxfltr;
-	u32	txflr;
-	u32	rxflr;
-	u32	sr;
-	u32	imr;
-	u32	isr;
-	u32	risr;
-	u32	txoicr;
-	u32	rxoicr;
-	u32	rxuicr;
-	u32	msticr;
-	u32	icr;
-	u32	dmacr;
-	u32	dmatdlr;
-	u32	dmardlr;
-	u32	idr;
-	u32	version;
-
-	/* Currently operates as 32 bits, though only the low 16 bits matter */
-	u32	dr;
-} __packed;
-
-#define dw_readl(dw, name)		__raw_readl(&(dw)->name)
-#define dw_writel(dw, name, val)	__raw_writel((val), &(dw)->name)
-
-/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
-static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
-
-static u32 *pclk_spi0;
-/* Always contains an accessible address, start with 0 */
-static struct dw_spi_reg *pspi;
-
-static struct kmsg_dumper dw_dumper;
-static int dumper_registered;
-
-static void dw_kmsg_dump(struct kmsg_dumper *dumper,
-			 enum kmsg_dump_reason reason)
-{
-	static char line[1024];
-	size_t len;
-
-	/* When run to this, we'd better re-init the HW */
-	mrst_early_console_init();
-
-	while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
-		early_mrst_console.write(&early_mrst_console, line, len);
-}
-
-/* Set the ratio rate to 115200, 8n1, IRQ disabled */
-static void max3110_write_config(void)
-{
-	u16 config;
-
-	config = 0xc001;
-	dw_writel(pspi, dr, config);
-}
-
-/* Translate char to a eligible word and send to max3110 */
-static void max3110_write_data(char c)
-{
-	u16 data;
-
-	data = 0x8000 | c;
-	dw_writel(pspi, dr, data);
-}
-
-void mrst_early_console_init(void)
-{
-	u32 ctrlr0 = 0;
-	u32 spi0_cdiv;
-	u32 freq; /* Freqency info only need be searched once */
-
-	/* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
-	pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-							MRST_CLK_SPI0_REG);
-	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
-	freq = 100000000 / (spi0_cdiv + 1);
-
-	if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL)
-		mrst_spi_paddr = MRST_REGBASE_SPI1;
-
-	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-						mrst_spi_paddr);
-
-	/* Disable SPI controller */
-	dw_writel(pspi, ssienr, 0);
-
-	/* Set control param, 8 bits, transmit only mode */
-	ctrlr0 = dw_readl(pspi, ctrl0);
-
-	ctrlr0 &= 0xfcc0;
-	ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
-		      | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
-	dw_writel(pspi, ctrl0, ctrlr0);
-
-	/*
-	 * Change the spi0 clk to comply with 115200 bps, use 100000 to
-	 * calculate the clk dividor to make the clock a little slower
-	 * than real baud rate.
-	 */
-	dw_writel(pspi, baudr, freq/100000);
-
-	/* Disable all INT for early phase */
-	dw_writel(pspi, imr, 0x0);
-
-	/* Set the cs to spi-uart */
-	dw_writel(pspi, ser, 0x2);
-
-	/* Enable the HW, the last step for HW init */
-	dw_writel(pspi, ssienr, 0x1);
-
-	/* Set the default configuration */
-	max3110_write_config();
-
-	/* Register the kmsg dumper */
-	if (!dumper_registered) {
-		dw_dumper.dump = dw_kmsg_dump;
-		kmsg_dump_register(&dw_dumper);
-		dumper_registered = 1;
-	}
-}
-
-/* Slave select should be called in the read/write function */
-static void early_mrst_spi_putc(char c)
-{
-	unsigned int timeout;
-	u32 sr;
-
-	timeout = MRST_SPI_TIMEOUT;
-	/* Early putc needs to make sure the TX FIFO is not full */
-	while (--timeout) {
-		sr = dw_readl(pspi, sr);
-		if (!(sr & SR_TF_NOT_FULL))
-			cpu_relax();
-		else
-			break;
-	}
-
-	if (!timeout)
-		pr_warn("MRST earlycon: timed out\n");
-	else
-		max3110_write_data(c);
-}
-
-/* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str,
-					unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_mrst_spi_putc('\r');
-		early_mrst_spi_putc(*str);
-		str++;
-	}
-}
-
-struct console early_mrst_console = {
-	.name =		"earlymrst",
-	.write =	early_mrst_spi_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
 /*
  * Following is the early console based on Medfield HSU (High
  * Speed UART) device.
@@ -259,7 +47,7 @@ void hsu_early_console_init(const char *s)
 		port = clamp_val(port, 0, 2);
 
 	paddr = HSU_PORT_BASE + port * 0x80;
-	phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
+	phsu = (void __iomem *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
 
 	/* Disable FIFO */
 	writeb(0x0, phsu + UART_FCR);