diff options
author | Guennadi Liakhovetski <g.liakhovetski@gmx.de> | 2010-07-21 10:13:25 +0000 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2010-08-04 16:17:49 +0900 |
commit | dfbcdf6420edab4afee73c7958f8fbfaade335b6 (patch) | |
tree | c86f0470edb837b7eebb5110120399d13a036531 /arch | |
parent | 6011bdeaa6089d49c02de69f05980da7bad314ab (diff) |
ARM: mach-shmobile: add HDMI support to the ap4evb board
Support HDMI in 720p mode.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-shmobile/board-ap4evb.c | 154 |
1 files changed, 152 insertions, 2 deletions
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 968601201fb5..024f8f4c2a33 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -44,6 +44,7 @@ #include <sound/sh_fsi.h> +#include <video/sh_mobile_hdmi.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> @@ -565,17 +566,152 @@ static struct platform_device fsi_device = { }, }; +static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_cfg = { + .name = "HDMI", + /* So far only 720p is supported */ + .xres = 1280, + .yres = 720, + /* + * If left and right margins are not multiples of 8, + * LDHAJR will be adjusted accordingly by the LCDC + * driver. Until we start using EDID, these values + * might have to be adjusted for different monitors. + */ + .left_margin = 200, + .right_margin = 88, + .hsync_len = 48, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .pixclock = 13468, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, + } +}; + +static struct resource lcdc1_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe947fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x17a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc1_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc1_resources), + .resource = lcdc1_resources, + .id = 1, + .dev = { + .platform_data = &sh_mobile_lcdc1_info, + .coherent_dma_mask = ~0, + }, +}; + +static struct sh_mobile_hdmi_info hdmi_info = { + .lcd_chan = &sh_mobile_lcdc1_info.ch[0], + .lcd_dev = &lcdc1_device.dev, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ + .start = evt2irq(0x17e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, +}; + static struct platform_device *ap4evb_devices[] __initdata = { &nor_flash_device, &smc911x_device, &sdhi0_device, &sdhi1_device, &usb1_host_device, - &lcdc_device, &fsi_device, &sh_mmcif_device + &lcdc1_device, + &lcdc_device, + &hdmi_device, }; +static int __init hdmi_init_pm_clock(void) +{ + struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); + int ret; + long rate; + + if (IS_ERR(hdmi_ick)) { + ret = PTR_ERR(hdmi_ick); + pr_err("Cannot get HDMI ICK: %d\n", ret); + goto out; + } + + ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk); + if (ret < 0) { + pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount); + goto out; + } + + pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk)); + + rate = clk_round_rate(&pllc2_clk, 594000000); + if (rate < 0) { + pr_err("Cannot get suitable rate: %ld\n", rate); + ret = rate; + goto out; + } + + ret = clk_set_rate(&pllc2_clk, rate); + if (ret < 0) { + pr_err("Cannot set rate %ld: %d\n", rate, ret); + goto out; + } + + pr_debug("PLLC2 set frequency %lu\n", rate); + + ret = clk_set_parent(hdmi_ick, &pllc2_clk); + if (ret < 0) { + pr_err("Cannot set HDMI parent: %d\n", ret); + goto out; + } + +out: + if (!IS_ERR(hdmi_ick)) + clk_put(hdmi_ick); + return ret; +} + +device_initcall(hdmi_init_pm_clock); + /* * FIXME !! * @@ -689,9 +825,9 @@ static void __init ap4evb_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A - static void __init ap4evb_init(void) { + u32 srcr4; struct clk *clk; sh7372_pinmux_init(); @@ -915,6 +1051,17 @@ static void __init ap4evb_init(void) sh7372_add_standard_devices(); + /* HDMI */ + gpio_request(GPIO_FN_HDMI_HPD, NULL); + gpio_request(GPIO_FN_HDMI_CEC, NULL); + + /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ +#define SRCR4 0xe61580bc + srcr4 = __raw_readl(SRCR4); + __raw_writel(srcr4 | (1 << 13), SRCR4); + udelay(50); + __raw_writel(srcr4 & ~(1 << 13), SRCR4); + platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); } @@ -922,6 +1069,9 @@ static void __init ap4evb_timer_init(void) { sh7372_clock_init(); shmobile_timer.init(); + + /* External clock source */ + clk_set_rate(&dv_clki_clk, 27000000); } static struct sys_timer ap4evb_timer = { |