Merge upstream 2.6.13-rc1-git1 into 'ieee80211' branch of netdev-2.6.

68 files changed, 1432 insertions, 994 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c8d94dcd8ef7..620f2ca94ed2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -361,6 +361,11 @@ config NO_IDLE_HZ
 	  Alternatively, if you want dynamic tick automatically enabled
 	  during boot, pass "dyntick=enable" via the kernel command string.
 
+	  Please note that dynamic tick may affect the accuracy of
+	  timekeeping on some platforms depending on the implementation.
+	  Currently at least OMAP platform is known to have accurate
+	  timekeeping with dynamic tick.
+
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 4c38bd8bc298..b713c44c6fb4 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -30,9 +30,6 @@ extern void __lshrdi3(void);
 extern void __modsi3(void);
 extern void __muldi3(void);
 extern void __ucmpdi2(void);
-extern void __udivdi3(void);
-extern void __umoddi3(void);
-extern void __udivmoddi4(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
 extern void __do_div64(void);
@@ -134,9 +131,6 @@ EXPORT_SYMBOL(__lshrdi3);
 EXPORT_SYMBOL(__modsi3);
 EXPORT_SYMBOL(__muldi3);
 EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__udivmoddi4);
 EXPORT_SYMBOL(__udivsi3);
 EXPORT_SYMBOL(__umodsi3);
 EXPORT_SYMBOL(__do_div64);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8cf733daa800..35b7273cfdb4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -359,7 +359,8 @@ void cpu_init(void)
 	      "I" (offsetof(struct stack, abt[0])),
 	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE));
+	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	    : "r14");
 }
 
 static struct machine_desc * __init setup_machine(unsigned int nr)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 34892758f098..a931409c8fe4 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -502,3 +502,126 @@ int __init setup_profiling_timer(unsigned int multiplier)
 {
 	return -EINVAL;
 }
+
+static int
+on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait,
+		 cpumask_t mask)
+{
+	int ret = 0;
+
+	preempt_disable();
+
+	ret = smp_call_function_on_cpu(func, info, retry, wait, mask);
+	if (cpu_isset(smp_processor_id(), mask))
+		func(info);
+
+	preempt_enable();
+
+	return ret;
+}
+
+/**********************************************************************/
+
+/*
+ * TLB operations
+ */
+struct tlb_args {
+	struct vm_area_struct *ta_vma;
+	unsigned long ta_start;
+	unsigned long ta_end;
+};
+
+static inline void ipi_flush_tlb_all(void *ignored)
+{
+	local_flush_tlb_all();
+}
+
+static inline void ipi_flush_tlb_mm(void *arg)
+{
+	struct mm_struct *mm = (struct mm_struct *)arg;
+
+	local_flush_tlb_mm(mm);
+}
+
+static inline void ipi_flush_tlb_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_kernel_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_page(ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+
+static inline void ipi_flush_tlb_kernel_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	cpumask_t mask = mm->cpu_vm_mask;
+
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
+	struct tlb_args ta;
+
+	ta.ta_vma = vma;
+	ta.ta_start = uaddr;
+
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask);
+}
+
+void flush_tlb_kernel_page(unsigned long kaddr)
+{
+	struct tlb_args ta;
+
+	ta.ta_start = kaddr;
+
+	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+                     unsigned long start, unsigned long end)
+{
+	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
+	struct tlb_args ta;
+
+	ta.ta_vma = vma;
+	ta.ta_start = start;
+	ta.ta_end = end;
+
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	struct tlb_args ta;
+
+	ta.ta_start = start;
+	ta.ta_end = end;
+
+	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1);
+}
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index c0e65833ffc4..8725d63e4219 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   strnlen_user.o strchr.o strrchr.o testchangebit.o  \
 		   testclearbit.o testsetbit.o uaccess.o getuser.o    \
 		   putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
-		   ucmpdi2.o udivdi3.o lib1funcs.o div64.o	      \
+		   ucmpdi2.o lib1funcs.o div64.o	              \
 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h
deleted file mode 100644
index 90ae647e4d76..000000000000
--- a/arch/arm/lib/longlong.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/* longlong.h -- based on code from gcc-2.95.3
-
-   definitions for mixed size 32/64 bit arithmetic.
-   Copyright (C) 1991, 92, 94, 95, 96, 1997, 1998 Free Software Foundation, Inc.
-
-   This definition file is free software; you can redistribute it
-   and/or modify it under the terms of the GNU General Public
-   License as published by the Free Software Foundation; either
-   version 2, or (at your option) any later version.
-
-   This definition file is distributed in the hope that it will be
-   useful, but WITHOUT ANY WARRANTY; without even the implied
-   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-   See the GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Borrowed from GCC 2.95.3, I Molton 29/07/01 */
-
-#ifndef SI_TYPE_SIZE
-#define SI_TYPE_SIZE 32
-#endif
-
-#define __BITS4 (SI_TYPE_SIZE / 4)
-#define __ll_B (1L << (SI_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((u32) (t) % __ll_B)
-#define __ll_highpart(t) ((u32) (t) / __ll_B)
-
-/* Define auxiliary asm macros.
-
-   1) umul_ppmm(high_prod, low_prod, multipler, multiplicand)
-   multiplies two u32 integers MULTIPLER and MULTIPLICAND,
-   and generates a two-part u32 product in HIGH_PROD and
-   LOW_PROD.
-
-   2) __umulsidi3(a,b) multiplies two u32 integers A and B,
-   and returns a u64 product.  This is just a variant of umul_ppmm.
-
-   3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
-   denominator) divides a two-word unsigned integer, composed by the
-   integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and
-   places the quotient in QUOTIENT and the remainder in REMAINDER.
-   HIGH_NUMERATOR must be less than DENOMINATOR for correct operation.
-   If, in addition, the most significant bit of DENOMINATOR must be 1,
-   then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1.
-
-   4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
-   denominator).  Like udiv_qrnnd but the numbers are signed.  The
-   quotient is rounded towards 0.
-
-   5) count_leading_zeros(count, x) counts the number of zero-bits from
-   the msb to the first non-zero bit.  This is the number of steps X
-   needs to be shifted left to set the msb.  Undefined for X == 0.
-
-   6) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
-   high_addend_2, low_addend_2) adds two two-word unsigned integers,
-   composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and
-   LOW_ADDEND_2 respectively.  The result is placed in HIGH_SUM and
-   LOW_SUM.  Overflow (i.e. carry out) is not stored anywhere, and is
-   lost.
-
-   7) sub_ddmmss(high_difference, low_difference, high_minuend,
-   low_minuend, high_subtrahend, low_subtrahend) subtracts two
-   two-word unsigned integers, composed by HIGH_MINUEND_1 and
-   LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2
-   respectively.  The result is placed in HIGH_DIFFERENCE and
-   LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
-   and is lost.
-
-   If any of these macros are left undefined for a particular CPU,
-   C macros are used.  */
-
-#if defined (__arm__)
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-  __asm__ ("adds	%1, %4, %5					\n\
-	adc	%0, %2, %3"						\
-	   : "=r" ((u32) (sh)),					\
-	     "=&r" ((u32) (sl))					\
-	   : "%r" ((u32) (ah)),					\
-	     "rI" ((u32) (bh)),					\
-	     "%r" ((u32) (al)),					\
-	     "rI" ((u32) (bl)))
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-  __asm__ ("subs	%1, %4, %5					\n\
-	sbc	%0, %2, %3"						\
-	   : "=r" ((u32) (sh)),					\
-	     "=&r" ((u32) (sl))					\
-	   : "r" ((u32) (ah)),					\
-	     "rI" ((u32) (bh)),					\
-	     "r" ((u32) (al)),					\
-	     "rI" ((u32) (bl)))
-#define umul_ppmm(xh, xl, a, b) \
-{register u32 __t0, __t1, __t2;					\
-  __asm__ ("%@ Inlined umul_ppmm					\n\
-	mov	%2, %5, lsr #16						\n\
-	mov	%0, %6, lsr #16						\n\
-	bic	%3, %5, %2, lsl #16					\n\
-	bic	%4, %6, %0, lsl #16					\n\
-	mul	%1, %3, %4						\n\
-	mul	%4, %2, %4						\n\
-	mul	%3, %0, %3						\n\
-	mul	%0, %2, %0						\n\
-	adds	%3, %4, %3						\n\
-	addcs	%0, %0, #65536						\n\
-	adds	%1, %1, %3, lsl #16					\n\
-	adc	%0, %0, %3, lsr #16"					\
-	   : "=&r" ((u32) (xh)),					\
-	     "=r" ((u32) (xl)),					\
-	     "=&r" (__t0), "=&r" (__t1), "=r" (__t2)			\
-	   : "r" ((u32) (a)),					\
-	     "r" ((u32) (b)));}
-#define UMUL_TIME 20
-#define UDIV_TIME 100
-#endif				/* __arm__ */
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-#define __udiv_qrnnd_c(q, r, n1, n0, d) \
-  do {									\
-    u32 __d1, __d0, __q1, __q0;					\
-    u32 __r1, __r0, __m;						\
-    __d1 = __ll_highpart (d);						\
-    __d0 = __ll_lowpart (d);						\
-									\
-    __r1 = (n1) % __d1;							\
-    __q1 = (n1) / __d1;							\
-    __m = (u32) __q1 * __d0;					\
-    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
-    if (__r1 < __m)							\
-      {									\
-	__q1--, __r1 += (d);						\
-	if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
-	  if (__r1 < __m)						\
-	    __q1--, __r1 += (d);					\
-      }									\
-    __r1 -= __m;							\
-									\
-    __r0 = __r1 % __d1;							\
-    __q0 = __r1 / __d1;							\
-    __m = (u32) __q0 * __d0;					\
-    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
-    if (__r0 < __m)							\
-      {									\
-	__q0--, __r0 += (d);						\
-	if (__r0 >= (d))						\
-	  if (__r0 < __m)						\
-	    __q0--, __r0 += (d);					\
-      }									\
-    __r0 -= __m;							\
-									\
-    (q) = (u32) __q1 * __ll_B | __q0;				\
-    (r) = __r0;								\
-  } while (0)
-
-#define UDIV_NEEDS_NORMALIZATION 1
-#define udiv_qrnnd __udiv_qrnnd_c
-
-#define count_leading_zeros(count, x) \
-  do {									\
-    u32 __xr = (x);							\
-    u32 __a;							\
-									\
-    if (SI_TYPE_SIZE <= 32)						\
-      {									\
-	__a = __xr < ((u32)1<<2*__BITS4)				\
-	  ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4)		\
-	  : (__xr < ((u32)1<<3*__BITS4) ?  2*__BITS4 : 3*__BITS4);	\
-      }									\
-    else								\
-      {									\
-	for (__a = SI_TYPE_SIZE - 8; __a > 0; __a -= 8)			\
-	  if (((__xr >> __a) & 0xff) != 0)				\
-	    break;							\
-      }									\
-									\
-    (count) = SI_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a);		\
-  } while (0)
diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c
deleted file mode 100644
index e343be4c6642..000000000000
--- a/arch/arm/lib/udivdi3.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-#include "longlong.h"
-
-static const u8 __clz_tab[] = {
-	0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
-	    5, 5, 5, 5, 5, 5, 5, 5,
-	6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-	    6, 6, 6, 6, 6, 6, 6, 6,
-	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-	    7, 7, 7, 7, 7, 7, 7, 7,
-	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-	    7, 7, 7, 7, 7, 7, 7, 7,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-};
-
-u64 __udivmoddi4(u64 n, u64 d, u64 * rp)
-{
-	DIunion ww;
-	DIunion nn, dd;
-	DIunion rr;
-	u32 d0, d1, n0, n1, n2;
-	u32 q0, q1;
-	u32 b, bm;
-
-	nn.ll = n;
-	dd.ll = d;
-
-	d0 = dd.s.low;
-	d1 = dd.s.high;
-	n0 = nn.s.low;
-	n1 = nn.s.high;
-
-	if (d1 == 0) {
-		if (d0 > n1) {
-			/* 0q = nn / 0D */
-
-			count_leading_zeros(bm, d0);
-
-			if (bm != 0) {
-				/* Normalize, i.e. make the most significant bit of the
-				   denominator set.  */
-
-				d0 = d0 << bm;
-				n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm));
-				n0 = n0 << bm;
-			}
-
-			udiv_qrnnd(q0, n0, n1, n0, d0);
-			q1 = 0;
-
-			/* Remainder in n0 >> bm.  */
-		} else {
-			/* qq = NN / 0d */
-
-			if (d0 == 0)
-				d0 = 1 / d0;	/* Divide intentionally by zero.  */
-
-			count_leading_zeros(bm, d0);
-
-			if (bm == 0) {
-				/* From (n1 >= d0) /\ (the most significant bit of d0 is set),
-				   conclude (the most significant bit of n1 is set) /\ (the
-				   leading quotient digit q1 = 1).
-
-				   This special case is necessary, not an optimization.
-				   (Shifts counts of SI_TYPE_SIZE are undefined.)  */
-
-				n1 -= d0;
-				q1 = 1;
-			} else {
-				/* Normalize.  */
-
-				b = SI_TYPE_SIZE - bm;
-
-				d0 = d0 << bm;
-				n2 = n1 >> b;
-				n1 = (n1 << bm) | (n0 >> b);
-				n0 = n0 << bm;
-
-				udiv_qrnnd(q1, n1, n2, n1, d0);
-			}
-
-			/* n1 != d0...  */
-
-			udiv_qrnnd(q0, n0, n1, n0, d0);
-
-			/* Remainder in n0 >> bm.  */
-		}
-
-		if (rp != 0) {
-			rr.s.low = n0 >> bm;
-			rr.s.high = 0;
-			*rp = rr.ll;
-		}
-	} else {
-		if (d1 > n1) {
-			/* 00 = nn / DD */
-
-			q0 = 0;
-			q1 = 0;
-
-			/* Remainder in n1n0.  */
-			if (rp != 0) {
-				rr.s.low = n0;
-				rr.s.high = n1;
-				*rp = rr.ll;
-			}
-		} else {
-			/* 0q = NN / dd */
-
-			count_leading_zeros(bm, d1);
-			if (bm == 0) {
-				/* From (n1 >= d1) /\ (the most significant bit of d1 is set),
-				   conclude (the most significant bit of n1 is set) /\ (the
-				   quotient digit q0 = 0 or 1).
-
-				   This special case is necessary, not an optimization.  */
-
-				/* The condition on the next line takes advantage of that
-				   n1 >= d1 (true due to program flow).  */
-				if (n1 > d1 || n0 >= d0) {
-					q0 = 1;
-					sub_ddmmss(n1, n0, n1, n0, d1, d0);
-				} else
-					q0 = 0;
-
-				q1 = 0;
-
-				if (rp != 0) {
-					rr.s.low = n0;
-					rr.s.high = n1;
-					*rp = rr.ll;
-				}
-			} else {
-				u32 m1, m0;
-				/* Normalize.  */
-
-				b = SI_TYPE_SIZE - bm;
-
-				d1 = (d1 << bm) | (d0 >> b);
-				d0 = d0 << bm;
-				n2 = n1 >> b;
-				n1 = (n1 << bm) | (n0 >> b);
-				n0 = n0 << bm;
-
-				udiv_qrnnd(q0, n1, n2, n1, d1);
-				umul_ppmm(m1, m0, q0, d0);
-
-				if (m1 > n1 || (m1 == n1 && m0 > n0)) {
-					q0--;
-					sub_ddmmss(m1, m0, m1, m0, d1, d0);
-				}
-
-				q1 = 0;
-
-				/* Remainder in (n1n0 - m1m0) >> bm.  */
-				if (rp != 0) {
-					sub_ddmmss(n1, n0, n1, n0, m1, m0);
-					rr.s.low = (n1 << b) | (n0 >> bm);
-					rr.s.high = n1 >> bm;
-					*rp = rr.ll;
-				}
-			}
-		}
-	}
-
-	ww.s.low = q0;
-	ww.s.high = q1;
-	return ww.ll;
-}
-
-u64 __udivdi3(u64 n, u64 d)
-{
-	return __udivmoddi4(n, d, (u64 *) 0);
-}
-
-u64 __umoddi3(u64 u, u64 v)
-{
-	u64 w;
-
-	(void)__udivmoddi4(u, v, &w);
-
-	return w;
-}
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 9222e57bd872..dacbf504dae2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,6 +20,7 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/amba.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/arch/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
@@ -156,16 +157,6 @@ EXPORT_SYMBOL(cm_control);
 #define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
 #endif
 
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
-	unsigned long TimerLoad;
-	unsigned long TimerValue;
-	unsigned long TimerControl;
-	unsigned long TimerClear;
-} TimerStruct_t;
-
 static unsigned long timer_reload;
 
 /*
@@ -174,7 +165,6 @@ static unsigned long timer_reload;
  */
 unsigned long integrator_gettimeoffset(void)
 {
-	volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE;
 	unsigned long ticks1, ticks2, status;
 
 	/*
@@ -183,11 +173,11 @@ unsigned long integrator_gettimeoffset(void)
 	 * an interrupt.  We get around this by ensuring that the
 	 * counter has not reloaded between our two reads.
 	 */
-	ticks2 = timer1->TimerValue & 0xffff;
+	ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
 	do {
 		ticks1 = ticks2;
 		status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
-		ticks2 = timer1->TimerValue & 0xffff;
+		ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
 	} while (ticks2 > ticks1);
 
 	/*
@@ -213,14 +203,12 @@ unsigned long integrator_gettimeoffset(void)
 static irqreturn_t
 integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-
 	write_seqlock(&xtime_lock);
 
 	/*
 	 * clear the interrupt
 	 */
-	timer1->TimerClear = 1;
+	writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
 
 	/*
 	 * the clock tick routines are only processed on the
@@ -256,32 +244,29 @@ static struct irqaction integrator_timer_irq = {
  */
 void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
 {
-	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-	volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-	volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
-	unsigned int timer_ctrl = 0x80 | 0x40;	/* periodic */
+	unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 
 	timer_reload = reload;
 	timer_ctrl |= ctrl;
 
 	if (timer_reload > 0x100000) {
 		timer_reload >>= 8;
-		timer_ctrl |= 0x08; /* /256 */
+		timer_ctrl |= TIMER_CTRL_DIV256;
 	} else if (timer_reload > 0x010000) {
 		timer_reload >>= 4;
-		timer_ctrl |= 0x04; /* /16 */
+		timer_ctrl |= TIMER_CTRL_DIV16;
 	}
 
 	/*
 	 * Initialise to a known state (all timers off)
 	 */
-	timer0->TimerControl = 0;
-	timer1->TimerControl = 0;
-	timer2->TimerControl = 0;
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 
-	timer1->TimerLoad    = timer_reload;
-	timer1->TimerValue   = timer_reload;
-	timer1->TimerControl = timer_ctrl;
+	writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
+	writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
+	writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
 
 	/*
 	 * Make irqs happen for the system timer
diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/mach-omap/pm.c
index 00fac155df2a..6b03ccdc1e92 100644
--- a/arch/arm/mach-omap/pm.c
+++ b/arch/arm/mach-omap/pm.c
@@ -41,7 +41,9 @@
 #include <linux/pm.h>
 
 #include <asm/io.h>
+#include <asm/mach/time.h>
 #include <asm/mach-types.h>
+
 #include <asm/arch/omap16xx.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/mux.h>
@@ -80,13 +82,13 @@ void omap_pm_idle(void)
 		return;
 	}
 	mask32 = omap_readl(ARM_SYSST);
-	local_fiq_enable();
-	local_irq_enable();
 
-#if defined(CONFIG_OMAP_32K_TIMER) && defined(CONFIG_NO_IDLE_HZ)
-	/* Override timer to use VST for the next cycle */
-	omap_32k_timer_next_vst_interrupt();
-#endif
+	/*
+	 * Since an interrupt may set up a timer, we don't want to
+	 * reprogram the hardware timer with interrupts enabled.
+	 * Re-enable interrupts only after returning from idle.
+	 */
+	timer_dyn_reprogram();
 
 	if ((mask32 & DSP_IDLE) == 0) {
 		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
@@ -102,6 +104,8 @@ void omap_pm_idle(void)
 
 		func_ptr();
 	}
+	local_fiq_enable();
+	local_irq_enable();
 }
 
 /*
diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap/time.c
index 589e8b2740dd..dd34e9f4c413 100644
--- a/arch/arm/mach-omap/time.c
+++ b/arch/arm/mach-omap/time.c
@@ -4,7 +4,7 @@
  * OMAP Timers
  *
  * Copyright (C) 2004 Nokia Corporation
- * Partial timer rewrite and additional VST timer support by
+ * Partial timer rewrite and additional dynamic tick timer support by
  * Tony Lindgen <tony@atomide.com> and
  * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
@@ -261,7 +261,6 @@ unsigned long long sched_clock(void)
  * so with HZ = 100, TVR = 327.68.
  */
 #define OMAP_32K_TIMER_TICK_PERIOD	((32768 / HZ) - 1)
-#define MAX_SKIP_JIFFIES		25
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
 
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
@@ -347,6 +346,42 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_NO_IDLE_HZ
+/*
+ * Programs the next timer interrupt needed. Called when dynamic tick is
+ * enabled, and to reprogram the ticks to skip from pm_idle. Note that
+ * we can keep the timer continuous, and don't need to set it to run in
+ * one-shot mode. This is because the timer will get reprogrammed again
+ * after next interrupt.
+ */
+void omap_32k_timer_reprogram(unsigned long next_tick)
+{
+	omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
+}
+
+static struct irqaction omap_32k_timer_irq;
+extern struct timer_update_handler timer_update;
+
+static int omap_32k_timer_enable_dyn_tick(void)
+{
+	/* No need to reprogram timer, just use the next interrupt */
+	return 0;
+}
+
+static int omap_32k_timer_disable_dyn_tick(void)
+{
+	omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+	return 0;
+}
+
+static struct dyn_tick_timer omap_dyn_tick_timer = {
+	.enable		= omap_32k_timer_enable_dyn_tick,
+	.disable	= omap_32k_timer_disable_dyn_tick,
+	.reprogram	= omap_32k_timer_reprogram,
+	.handler	= omap_32k_timer_interrupt,
+};
+#endif	/* CONFIG_NO_IDLE_HZ */
+
 static struct irqaction omap_32k_timer_irq = {
 	.name		= "32KHz timer",
 	.flags		= SA_INTERRUPT | SA_TIMER,
@@ -355,6 +390,11 @@ static struct irqaction omap_32k_timer_irq = {
 
 static __init void omap_init_32k_timer(void)
 {
+
+#ifdef CONFIG_NO_IDLE_HZ
+	omap_timer.dyn_tick = &omap_dyn_tick_timer;
+#endif
+
 	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
 	omap_timer.offset  = omap_32k_timer_gettimeoffset;
 	omap_32k_last_tick = omap_32k_sync_timer_read();
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 534df0c6c770..d4d03d0daaec 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE
 	  the CRC data block will take more memory, but wil identify any
 	  faults with better precision.
 
+config PM_SIMTEC
+	bool
+	depends on PM && (ARCH_BAST || MACH_VR1000)
+	default y
+
 config S3C2410_LOWLEVEL_UART_PORT
 	int "S3C2410 UART to use for low-level messages"
 	default 0
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 7c379aad5d62..f99b689e4392 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_S3C2410_DMA)  += dma.o
 # Power Management support
 
 obj-$(CONFIG_PM)	   += pm.o sleep.o
+obj-$(CONFIG_PM_SIMTEC)	   += pm-simtec.o
 
 # S3C2440 support
 
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 64792f678668..4664bd11adc1 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -96,8 +96,8 @@ struct platform_device s3c_device_lcd = {
 	.num_resources	  = ARRAY_SIZE(s3c_lcd_resource),
 	.resource	  = s3c_lcd_resource,
 	.dev              = {
-		.dma_mask = &s3c_device_lcd_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
+		.dma_mask		= &s3c_device_lcd_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL
 	}
 };
 
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index b668c48f4399..cf9f46d88061 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -40,8 +40,11 @@
  *   04-Nov-2004  Ben Dooks
  *		  Fix standard IRQ wake for EINT0..4 and RTC
  *
- *   22-Feb-2004  Ben Dooks
+ *   22-Feb-2005  Ben Dooks
  *		  Fixed edge-triggering on ADC IRQ
+ *
+ *   28-Jun-2005  Ben Dooks
+ *		  Mark IRQ_LCD valid
 */
 
 #include <linux/init.h>
@@ -366,7 +369,6 @@ static struct irqchip s3c_irq_eint0t4 = {
 #define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
 #define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
 #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-#define INTMSK_LCD	 (1UL << (IRQ_LCD - IRQ_EINT0))
 
 static inline void
 s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
@@ -716,7 +718,6 @@ void __init s3c24xx_init_irq(void)
 		case IRQ_UART0:
 		case IRQ_UART1:
 		case IRQ_UART2:
-		case IRQ_LCD:
 		case IRQ_ADCPARENT:
 			set_irq_chip(irqno, &s3c_irq_level_chip);
 			set_irq_handler(irqno, do_level_IRQ);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index f3e970039b65..549bcb1f32c0 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -27,6 +27,7 @@
  *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
  *     14-Mar-2006 BJD  Updated for __iomem changes
  *     22-Jun-2006 BJD  Added DM9000 platform information
+ *     28-Jun-2006 BJD  Moved pm functionality out to common code
 */
 
 #include <linux/kernel.h>
@@ -67,7 +68,6 @@
 #include "devs.h"
 #include "cpu.h"
 #include "usb-simtec.h"
-#include "pm.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
 
@@ -405,44 +405,13 @@ void __init bast_map_io(void)
 	usb_simtec_init();
 }
 
-void __init bast_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
-#ifdef CONFIG_PM
-
-/* bast_init_machine
- *
- * enable the power management functions for the EB2410ITX
-*/
-
-static __init void bast_init_machine(void)
-{
-	unsigned long gstatus4;
-
-	printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n");
-
-	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
-	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
-	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
-	__raw_writel(gstatus4, S3C2410_GSTATUS4);
-
-	s3c2410_pm_init();
-}
-
-#else
-#define bast_init_machine NULL
-#endif
-
 
 MACHINE_START(BAST, "Simtec-BAST")
      MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
      BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
      BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(bast_map_io)
-     INITIRQ(bast_init_irq)
-	.init_machine	= bast_init_machine,
+
+	.map_io		= bast_map_io,
+	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 76be074944a0..1db2855e3e56 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -371,16 +371,12 @@ void __init vr1000_map_io(void)
 	usb_simtec_init();
 }
 
-void __init vr1000_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
      MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
      BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
      BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(vr1000_map_io)
-     INITIRQ(vr1000_init_irq)
+	.map_io		= vr1000_map_io,
+	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
new file mode 100644
index 000000000000..2cb798832223
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s3c2410/pm-simtec.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * Power Management helpers for Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+
+#include <asm/mach-types.h>
+
+#include "pm.h"
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+/* pm_simtec_init
+ *
+ * enable the power management functions
+*/
+
+static __init int pm_simtec_init(void)
+{
+	unsigned long gstatus4;
+
+	/* check which machine we are running on */
+
+	if (!machine_is_bast() && !machine_is_vr1000())
+		return 0;
+
+	printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
+
+	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
+	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
+	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
+
+	__raw_writel(gstatus4, S3C2410_GSTATUS4);
+
+	return s3c2410_pm_init();
+}
+
+arch_initcall(pm_simtec_init);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 9d1f2253e987..f01c0f8a2bb3 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -33,6 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_clcd.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>
@@ -788,38 +789,25 @@ void __init versatile_init(void)
  */
 #define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
 #if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)		/* Divide by 256 */
-#define TIMER_CTRL	0x88				/* Enable, Clock / 256 */
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
 #define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
 #elif TIMER_INTERVAL >= 0x10000
 #define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
-#define TIMER_CTRL	0x84				/* Enable, Clock / 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
 #define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
 #else
 #define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_CTRL	0x80				/* Enable */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
 #define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
 #endif
 
-#define TIMER_CTRL_IE	(1 << 5)	/* Interrupt Enable */
-
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
-	unsigned long TimerLoad;
-	unsigned long TimerValue;
-	unsigned long TimerControl;
-	unsigned long TimerClear;
-} TimerStruct_t;
-
 /*
  * Returns number of ms since last clock interrupt.  Note that interrupts
  * will have been disabled by do_gettimeoffset()
  */
 static unsigned long versatile_gettimeoffset(void)
 {
-	volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE;
 	unsigned long ticks1, ticks2, status;
 
 	/*
@@ -828,11 +816,11 @@ static unsigned long versatile_gettimeoffset(void)
 	 * an interrupt.  We get around this by ensuring that the
 	 * counter has not reloaded between our two reads.
 	 */
-	ticks2 = timer0->TimerValue & 0xffff;
+	ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 	do {
 		ticks1 = ticks2;
 		status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
-		ticks2 = timer0->TimerValue & 0xffff;
+		ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 	} while (ticks2 > ticks1);
 
 	/*
@@ -859,12 +847,10 @@ static unsigned long versatile_gettimeoffset(void)
  */
 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-
 	write_seqlock(&xtime_lock);
 
 	// ...clear the interrupt
-	timer0->TimerClear = 1;
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 
 	timer_tick(regs);
 
@@ -884,31 +870,32 @@ static struct irqaction versatile_timer_irq = {
  */
 static void __init versatile_timer_init(void)
 {
-	volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-	volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-	volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
-	volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE;
+	u32 val;
 
 	/* 
 	 * set clock frequency: 
 	 *	VERSATILE_REFCLK is 32KHz
 	 *	VERSATILE_TIMCLK is 1MHz
 	 */
-	*(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= 
-	  ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
-	   (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
+	val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE));
+	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+	       IO_ADDRESS(VERSATILE_SCTL_BASE));
 
 	/*
 	 * Initialise to a known state (all timers off)
 	 */
-	timer0->TimerControl = 0;
-	timer1->TimerControl = 0;
-	timer2->TimerControl = 0;
-	timer3->TimerControl = 0;
-
-	timer0->TimerLoad    = TIMER_RELOAD;
-	timer0->TimerValue   = TIMER_RELOAD;
-	timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE;  /* periodic + IE */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
+	writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
+	       TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
 
 	/* 
 	 * Make irqs happen for the system timer
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 6dcb23d64bf5..edffa47a4b2a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -437,7 +437,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
 	memtable_init(mi);
 	if (mdesc->map_io)
 		mdesc->map_io();
-	flush_tlb_all();
+	local_flush_tlb_all();
 
 	/*
 	 * initialise the zones within each node
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 052ab443ec4e..c3bd503b43a2 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -682,7 +682,7 @@ void __init memtable_init(struct meminfo *mi)
 	}
 
 	flush_cache_all();
-	flush_tlb_all();
+	local_flush_tlb_all();
 
 	top_pmd = pmd_off_k(0xffff0000);
 }
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index ba1a6e9f2b28..8ffb523e6c77 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		oprofilefs.o oprofile_stats.o \
 		timer_int.o )
 
-oprofile-y				:= $(DRIVER_OBJS) init.o
+oprofile-y				:= $(DRIVER_OBJS) init.o backtrace.o
 oprofile-$(CONFIG_CPU_XSCALE)		+= common.o op_model_xscale.o
 
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
new file mode 100644
index 000000000000..ec58d3e2eb8b
--- /dev/null
+++ b/arch/arm/oprofile/backtrace.c
@@ -0,0 +1,144 @@
+/*
+ * Arm specific backtracing code for oprofile
+ *
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * Based on i386 oprofile backtrace code by John Levon, David Smith
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ */
+struct frame_tail {
+	struct frame_tail *fp;
+	unsigned long sp;
+	unsigned long lr;
+} __attribute__((packed));
+
+
+#ifdef CONFIG_FRAME_POINTER
+static struct frame_tail* kernel_backtrace(struct frame_tail *tail)
+{
+	oprofile_add_trace(tail->lr);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (tail >= tail->fp)
+		return NULL;
+
+	return tail->fp-1;
+}
+#endif
+
+static struct frame_tail* user_backtrace(struct frame_tail *tail)
+{
+	struct frame_tail buftail;
+
+	/* hardware pte might not be valid due to dirty/accessed bit emulation
+	 * so we use copy_from_user and benefit from exception fixups */
+	if (copy_from_user(&buftail, tail, sizeof(struct frame_tail)))
+		return NULL;
+
+	oprofile_add_trace(buftail.lr);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (tail >= buftail.fp)
+		return NULL;
+
+	return buftail.fp-1;
+}
+
+/* Compare two addresses and see if they're on the same page */
+#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \
+	== ((((unsigned long) y) + offset) >> PAGE_SHIFT))
+
+/* check that the page(s) containing the frame tail are present */
+static int pages_present(struct frame_tail *tail)
+{
+	struct mm_struct * mm = current->mm;
+
+	if (!check_user_page_readable(mm, (unsigned long)tail))
+		return 0;
+
+	if (CMP_ADDR_EQUAL(tail, tail, 8))
+		return 1;
+
+	if (!check_user_page_readable(mm, ((unsigned long)tail) + 8))
+		return 0;
+
+	return 1;
+}
+
+/*
+ * |             | /\ Higher addresses
+ * |             |
+ * --------------- stack base (address of current_thread_info)
+ * | thread info |
+ * .             .
+ * |    stack    |
+ * --------------- saved regs->ARM_fp value if valid (frame_tail address)
+ * .             .
+ * --------------- struct pt_regs stored on stack (struct pt_regs *)
+ * |             |
+ * .             .
+ * |             |
+ * --------------- %esp
+ * |             |
+ * |             | \/ Lower addresses
+ *
+ * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values
+ */
+static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs)
+{
+	unsigned long tailaddr = (unsigned long)tail;
+	unsigned long stack = (unsigned long)regs;
+	unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
+
+	return (tailaddr > stack) && (tailaddr < stack_base);
+}
+
+void arm_backtrace(struct pt_regs const *regs, unsigned int depth)
+{
+	struct frame_tail *tail;
+	unsigned long last_address = 0;
+
+	tail = ((struct frame_tail *) regs->ARM_fp) - 1;
+
+	if (!user_mode(regs)) {
+
+#ifdef CONFIG_FRAME_POINTER
+		while (depth-- && tail && valid_kernel_stack(tail, regs)) {
+			tail = kernel_backtrace(tail);
+		}
+#endif
+		return;
+	}
+
+	while (depth-- && tail && !((unsigned long) tail & 3)) {
+		if ((!CMP_ADDR_EQUAL(last_address, tail, 0)
+			|| !CMP_ADDR_EQUAL(last_address, tail, 8))
+				&& !pages_present(tail))
+			return;
+		last_address = (unsigned long) tail;
+		tail = user_backtrace(tail);
+	}
+}
+
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
index cce3d3015eb7..d315a3a86c86 100644
--- a/arch/arm/oprofile/init.c
+++ b/arch/arm/oprofile/init.c
@@ -20,6 +20,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	ret = pmu_init(ops, &op_xscale_spec);
 #endif
 
+	ops->backtrace = arm_backtrace;
+
 	return ret;
 }
 
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2d4caf4781ad..2148d07484b7 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -24,6 +24,8 @@ struct op_arm_model_spec {
 extern struct op_arm_model_spec op_xscale_spec;
 #endif
 
+extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
+
 extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
 extern void pmu_exit(void);
 #endif /* OP_ARM_MODEL_H */
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 55a02bc994a3..4b97950984e9 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -117,7 +117,13 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m)
 	if (nh >= m)
 		return ~0ULL;
 	mh = m >> 32;
-	z = (mh << 32 <= nh) ? 0xffffffff00000000ULL : (nh / mh) << 32;
+	if (mh << 32 <= nh) {
+		z = 0xffffffff00000000ULL;
+	} else {
+		z = nh;
+		do_div(z, mh);
+		z <<= 32;
+	}
 	mul64to128(&termh, &terml, m, z);
 	sub128(&remh, &reml, nh, nl, termh, terml);
 	ml = m << 32;
@@ -126,7 +132,12 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m)
 		add128(&remh, &reml, remh, reml, mh, ml);
 	}
 	remh = (remh << 32) | (reml >> 32);
-	z |= (mh << 32 <= remh) ? 0xffffffff : remh / mh;
+	if (mh << 32 <= remh) {
+		z |= 0xffffffff;
+	} else {
+		do_div(remh, mh);
+		z |= remh;
+	}
 	return z;
 }
 
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index fa3053e84db5..b801cd66b6ea 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -32,6 +32,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/bitops.h>
+
+#include <asm/div64.h>
 #include <asm/ptrace.h>
 #include <asm/vfp.h>
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 3aeedd2afc70..22f3da4e0829 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -89,7 +89,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
 	current->thread.error_code = 0;
 	current->thread.trap_no = 6;
 
-	force_sig_info(SIGFPE, &info, current);
+	send_sig_info(SIGFPE, &info, current);
 }
 
 static void vfp_panic(char *reason)
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index 6849fe35cb2e..14dd696ddeb1 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -32,6 +32,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/bitops.h>
+
+#include <asm/div64.h>
 #include <asm/ptrace.h>
 #include <asm/vfp.h>
 
@@ -303,7 +305,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand)
 		if (z <= a)
 			return (s32)a >> 1;
 	}
-	return (u32)(((u64)a << 31) / z) + (z >> 1);
+	{
+		u64 v = (u64)a << 31;
+		do_div(v, z);
+		return v + (z >> 1);
+	}
 }
 
 static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr)
@@ -1107,7 +1113,11 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
 		vsn.significand >>= 1;
 		vsd.exponent++;
 	}
-	vsd.significand = ((u64)vsn.significand << 32) / vsm.significand;
+	{
+		u64 significand = (u64)vsn.significand << 32;
+		do_div(significand, vsm.significand);
+		vsd.significand = significand;
+	}
 	if ((vsd.significand & 0x3f) == 0)
 		vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32);
 
diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c
index 4a17956512e1..6835f6d47c31 100644
--- a/arch/i386/boot/tools/build.c
+++ b/arch/i386/boot/tools/build.c
@@ -70,7 +70,8 @@ void usage(void)
 
 int main(int argc, char ** argv)
 {
-	unsigned int i, c, sz, setup_sectors;
+	unsigned int i, sz, setup_sectors;
+	int c;
 	u32 sys_size;
 	byte major_root, minor_root;
 	struct stat sb;
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 9f63ae0f404b..b7808a89d945 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -159,9 +159,15 @@ char *__acpi_map_table(unsigned long phys, unsigned long size)
 #endif
 
 #ifdef CONFIG_PCI_MMCONFIG
-static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
+struct acpi_table_mcfg_config *pci_mmcfg_config;
+int pci_mmcfg_config_num;
+
+int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
 {
 	struct acpi_table_mcfg *mcfg;
+	unsigned long i;
+	int config_size;
 
 	if (!phys_addr || !size)
 		return -EINVAL;
@@ -172,18 +178,38 @@ static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
 		return -ENODEV;
 	}
 
-	if (mcfg->base_reserved) {
-		printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+	/* how many config structures do we have */
+	pci_mmcfg_config_num = 0;
+	i = size - sizeof(struct acpi_table_mcfg);
+	while (i >= sizeof(struct acpi_table_mcfg_config)) {
+		++pci_mmcfg_config_num;
+		i -= sizeof(struct acpi_table_mcfg_config);
+	};
+	if (pci_mmcfg_config_num == 0) {
+		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
 		return -ENODEV;
 	}
 
-	pci_mmcfg_base_addr = mcfg->base_address;
+	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
+	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
+	if (!pci_mmcfg_config) {
+		printk(KERN_WARNING PREFIX
+		       "No memory for MCFG config tables\n");
+		return -ENOMEM;
+	}
+
+	memcpy(pci_mmcfg_config, &mcfg->config, config_size);
+	for (i = 0; i < pci_mmcfg_config_num; ++i) {
+		if (mcfg->config[i].base_reserved) {
+			printk(KERN_ERR PREFIX
+			       "MMCONFIG not in low 4GB of memory\n");
+			return -ENODEV;
+		}
+	}
 
 	return 0;
 }
-#else
-#define	acpi_parse_mcfg NULL
-#endif /* !CONFIG_PCI_MMCONFIG */
+#endif /* CONFIG_PCI_MMCONFIG */
 
 #ifdef CONFIG_X86_LOCAL_APIC
 static int __init
@@ -507,6 +533,22 @@ acpi_unmap_lsapic(int cpu)
 EXPORT_SYMBOL(acpi_unmap_lsapic);
 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
 
+int
+acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int
+acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
 static unsigned long __init
 acpi_scan_rsdp (
 	unsigned long		start,
@@ -1123,7 +1165,6 @@ int __init acpi_boot_init(void)
 	acpi_process_madt();
 
 	acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
-	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
 
 	return 0;
 }
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 720975e1af50..87325263cd4f 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -25,7 +25,8 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 
 int pci_routeirq;
 int pcibios_last_bus = -1;
-struct pci_bus *pci_root_bus = NULL;
+unsigned long pirq_table_addr;
+struct pci_bus *pci_root_bus;
 struct pci_raw_ops *raw_pci_ops;
 
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
@@ -133,7 +134,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
 
 	printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
 
-	return pci_scan_bus(busnum, &pci_root_ops, NULL);
+	return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL);
 }
 
 extern u8 pci_cache_line_size;
@@ -188,6 +189,9 @@ char * __devinit  pcibios_setup(char *str)
 	} else if (!strcmp(str, "biosirq")) {
 		pci_probe |= PCI_BIOS_IRQ_SCAN;
 		return NULL;
+	} else if (!strncmp(str, "pirqaddr=", 9)) {
+		pirq_table_addr = simple_strtoul(str+9, NULL, 0);
+		return NULL;
 	}
 #endif
 #ifdef CONFIG_PCI_DIRECT
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index 83458f81e661..78ca1ecbb907 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -58,6 +58,35 @@ struct irq_router_handler {
 int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
 
 /*
+ *  Check passed address for the PCI IRQ Routing Table signature
+ *  and perform checksum verification.
+ */
+
+static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+{
+	struct irq_routing_table *rt;
+	int i;
+	u8 sum;
+
+	rt = (struct irq_routing_table *) addr;
+	if (rt->signature != PIRQ_SIGNATURE ||
+	    rt->version != PIRQ_VERSION ||
+	    rt->size % 16 ||
+	    rt->size < sizeof(struct irq_routing_table))
+		return NULL;
+	sum = 0;
+	for (i=0; i < rt->size; i++)
+		sum += addr[i];
+	if (!sum) {
+		DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		return rt;
+	}
+	return NULL;
+}
+
+
+
+/*
  *  Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
  */
 
@@ -65,23 +94,17 @@ static struct irq_routing_table * __init pirq_find_routing_table(void)
 {
 	u8 *addr;
 	struct irq_routing_table *rt;
-	int i;
-	u8 sum;
 
+	if (pirq_table_addr) {
+		rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr));
+		if (rt)
+			return rt;
+		printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
+	}
 	for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
-		rt = (struct irq_routing_table *) addr;
-		if (rt->signature != PIRQ_SIGNATURE ||
-		    rt->version != PIRQ_VERSION ||
-		    rt->size % 16 ||
-		    rt->size < sizeof(struct irq_routing_table))
-			continue;
-		sum = 0;
-		for(i=0; i<rt->size; i++)
-			sum += addr[i];
-		if (!sum) {
-			DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		rt = pirq_check_routing_table(addr);
+		if (rt)
 			return rt;
-		}
 	}
 	return NULL;
 }
diff --git a/arch/i386/pci/legacy.c b/arch/i386/pci/legacy.c
index 1492e3753869..149a9588c256 100644
--- a/arch/i386/pci/legacy.c
+++ b/arch/i386/pci/legacy.c
@@ -45,6 +45,8 @@ static int __init pci_legacy_init(void)
 
 	printk("PCI: Probing PCI hardware\n");
 	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
 
 	pcibios_fixup_peer_bridges();
 
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 021a50aa51f4..60f0e7a1162a 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -11,11 +11,9 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include "pci.h"
 
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-u32 pci_mmcfg_base_addr;
-
 #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
 
 /* The base address of the last MMCONFIG device accessed */
@@ -24,10 +22,31 @@ static u32 mmcfg_last_accessed_device;
 /*
  * Functions for accessing PCI configuration space with MMCONFIG accesses
  */
+static u32 get_base_addr(unsigned int seg, int bus)
+{
+	int cfg_num = -1;
+	struct acpi_table_mcfg_config *cfg;
+
+	while (1) {
+		++cfg_num;
+		if (cfg_num >= pci_mmcfg_config_num) {
+			/* something bad is going on, no cfg table is found. */
+			/* so we fall back to the old way we used to do this */
+			/* and just rely on the first entry to be correct. */
+			return pci_mmcfg_config[0].base_address;
+		}
+		cfg = &pci_mmcfg_config[cfg_num];
+		if (cfg->pci_segment_group_number != seg)
+			continue;
+		if ((cfg->start_bus_number <= bus) &&
+		    (cfg->end_bus_number >= bus))
+			return cfg->base_address;
+	}
+}
 
-static inline void pci_exp_set_dev_base(int bus, int devfn)
+static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn)
 {
-	u32 dev_base = pci_mmcfg_base_addr | (bus << 20) | (devfn << 12);
+	u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12);
 	if (dev_base != mmcfg_last_accessed_device) {
 		mmcfg_last_accessed_device = dev_base;
 		set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
@@ -44,7 +63,7 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(bus, devfn);
+	pci_exp_set_dev_base(seg, bus, devfn);
 
 	switch (len) {
 	case 1:
@@ -73,7 +92,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(bus, devfn);
+	pci_exp_set_dev_base(seg, bus, devfn);
 
 	switch (len) {
 	case 1:
@@ -101,7 +120,11 @@ static int __init pci_mmcfg_init(void)
 {
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		goto out;
-	if (!pci_mmcfg_base_addr)
+
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	if ((pci_mmcfg_config_num == 0) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].base_address == 0))
 		goto out;
 
 	/* Kludge for now. Don't use mmconfig on AMD systems because
diff --git a/arch/i386/pci/numa.c b/arch/i386/pci/numa.c
index 9e3695461899..adbe17a38f6f 100644
--- a/arch/i386/pci/numa.c
+++ b/arch/i386/pci/numa.c
@@ -115,6 +115,8 @@ static int __init pci_numa_init(void)
 		return 0;
 
 	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
 	if (num_online_nodes() > 1)
 		for_each_online_node(quad) {
 			if (quad == 0)
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index a8fc80ca69f3..a80f0f55ff51 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -27,6 +27,7 @@
 #define PCI_ASSIGN_ALL_BUSSES	0x4000
 
 extern unsigned int pci_probe;
+extern unsigned long pirq_table_addr;
 
 /* pci-i386.c */
 
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 487d2e36b0a6..c05613980300 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -99,7 +99,7 @@ CONFIG_ACPI_DEALLOCATE_IRQ=y
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
-# CONFIG_EFI_PCDP is not set
+CONFIG_EFI_PCDP=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
@@ -650,7 +650,7 @@ CONFIG_MMTIMER=y
 #
 # Console display driver support
 #
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 
 #
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 47f45341ac62..73454eee26f1 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-20050621
-# Tue Jun 21 14:03:24 2005
+# Linux kernel version: 2.6.13-rc1-20050629
+# Wed Jun 29 15:28:12 2005
 #
 
 #
@@ -80,18 +80,29 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 # CONFIG_NUMA is not set
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -257,6 +268,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -395,6 +407,7 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -407,6 +420,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -598,9 +613,7 @@ CONFIG_GAMEPORT=m
 # CONFIG_GAMEPORT_NS558 is not set
 # CONFIG_GAMEPORT_L4 is not set
 # CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
 # CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
 
 #
 # Character devices
@@ -629,7 +642,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -743,6 +755,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -779,9 +792,11 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -838,7 +853,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -857,12 +872,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -922,7 +942,6 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
@@ -953,15 +972,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1069,6 +1091,7 @@ CONFIG_LOG_BUF_SHIFT=20
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1090,7 +1113,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 21d6f9bab5e9..b7755e4436d2 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10
-# Wed Dec 29 09:05:48 2004
+# Linux kernel version: 2.6.13-rc1-20050629
+# Wed Jun 29 15:31:11 2005
 #
 
 #
@@ -12,6 +12,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -24,23 +25,26 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -59,12 +63,15 @@ CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 CONFIG_IA64_HP_ZX1=y
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 # CONFIG_IA64_HP_SIM is not set
 # CONFIG_ITANIUM is not set
@@ -73,22 +80,36 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 # CONFIG_NUMA is not set
 CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 # CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_ACPI_DEALLOCATE_IRQ=y
 
 #
 # Firmware Drivers
@@ -120,6 +141,7 @@ CONFIG_ACPI_BUS=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_PCI=y
 CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
 
 #
 # Bus options (PCI, PCMCIA)
@@ -129,6 +151,7 @@ CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCI Hotplug Support
@@ -138,7 +161,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 
 #
@@ -147,10 +169,6 @@ CONFIG_HOTPLUG_PCI_ACPI=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # Device Drivers
 #
 
@@ -184,6 +202,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -203,6 +222,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -246,6 +266,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -275,6 +296,7 @@ CONFIG_CHR_DEV_OSST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -288,6 +310,7 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -303,13 +326,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -319,8 +339,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
@@ -331,7 +349,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -344,9 +362,9 @@ CONFIG_SCSI_QLA2XXX=y
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -368,12 +386,12 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -386,6 +404,8 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -405,8 +425,6 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_ARPTABLES=y
 # CONFIG_IP_NF_ARPFILTER is not set
 # CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -483,7 +501,6 @@ CONFIG_NET_PCI=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -505,9 +522,11 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -565,18 +584,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -586,6 +593,16 @@ CONFIG_SERIO=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -603,7 +620,6 @@ CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -611,6 +627,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -644,6 +661,12 @@ CONFIG_DRM_RADEON=y
 # CONFIG_DRM_SIS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -668,6 +691,7 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -691,10 +715,14 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -705,21 +733,29 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -746,6 +782,7 @@ CONFIG_VIDEO_DEV=y
 #
 # Video Adapters
 #
+# CONFIG_TUNER_MULTI_I2C is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
@@ -778,6 +815,11 @@ CONFIG_VIDEO_DEV=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -785,6 +827,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -801,6 +844,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -820,6 +864,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -869,6 +914,8 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
 # CONFIG_SND_KORG1212 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -876,6 +923,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
 # CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_ALS4000 is not set
@@ -893,13 +941,14 @@ CONFIG_SND_FM801_TEA575X=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_SONICVIBES is not set
 # CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
 
 #
 # USB devices
 #
 # CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
 
 #
 # Open Sound System
@@ -909,6 +958,8 @@ CONFIG_SND_FM801_TEA575X=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -920,8 +971,6 @@ CONFIG_USB_BANDWIDTH=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -929,7 +978,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 
@@ -947,12 +999,11 @@ CONFIG_USB_UHCI_HCD=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -966,9 +1017,11 @@ CONFIG_USB_HIDINPUT=y
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -978,7 +1031,6 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
@@ -992,6 +1044,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_SE401 is not set
 # CONFIG_USB_SN9C102 is not set
 # CONFIG_USB_STV680 is not set
+# CONFIG_USB_PWC is not set
 
 #
 # USB Network Adapters
@@ -1001,6 +1054,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1016,7 +1070,6 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1025,9 +1078,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -1041,12 +1096,22 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1056,6 +1121,10 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1089,7 +1158,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
@@ -1120,15 +1188,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -1209,6 +1280,8 @@ CONFIG_NLS_UTF8=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Profiling support
@@ -1218,14 +1291,18 @@ CONFIG_CRC32=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_KPROBES=y
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 CONFIG_IA64_PRINT_HAZARDS=y
@@ -1252,6 +1329,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index b8db6e3e5e81..11957598a8b9 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -156,10 +156,13 @@
 */
 #define DELAYED_RESOURCE_CNT	64
 
+#define PCI_DEVICE_ID_HP_SX2000_IOC	0x12ec
+
 #define ZX1_IOC_ID	((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP)
 #define ZX2_IOC_ID	((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP)
 #define REO_IOC_ID	((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP)
 #define SX1000_IOC_ID	((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP)
+#define SX2000_IOC_ID	((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP)
 
 #define ZX1_IOC_OFFSET	0x1000	/* ACPI reports SBA, we want IOC */
 
@@ -1726,6 +1729,7 @@ static struct ioc_iommu ioc_iommu_info[] __initdata = {
 	{ ZX1_IOC_ID, "zx1", ioc_zx1_init },
 	{ ZX2_IOC_ID, "zx2", NULL },
 	{ SX1000_IOC_ID, "sx1000", NULL },
+	{ SX2000_IOC_ID, "sx2000", NULL },
 };
 
 static struct ioc * __init
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 786e70718ce4..7a8ae0f4b387 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/serialP.h>
+#include <linux/sysrq.h>
 
 #include <asm/irq.h>
 #include <asm/hw_irq.h>
@@ -149,12 +150,17 @@ static  void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
 				seen_esc = 2;
 				continue;
 			} else if ( seen_esc == 2 ) {
-				if ( ch == 'P' ) show_state();		/* F1 key */
-#ifdef CONFIG_KDB
-				if ( ch == 'S' )
-					kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs);
+				if ( ch == 'P' ) /* F1 */
+					show_state();
+#ifdef CONFIG_MAGIC_SYSRQ
+				if ( ch == 'S' ) { /* F4 */
+					do
+						ch = ia64_ssc(0, 0, 0, 0,
+							      SSC_GETCHAR);
+					while (!ch);
+					handle_sysrq(ch, regs, NULL);
+				}
 #endif
-
 				seen_esc = 0;
 				continue;
 			}
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 72dfd9e7de0f..cda06f88c66e 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -236,9 +236,7 @@ acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end)
 	if (BAD_MADT_ENTRY(iosapic, end))
 		return -EINVAL;
 
-	iosapic_init(iosapic->address, iosapic->global_irq_base);
-
-	return 0;
+	return iosapic_init(iosapic->address, iosapic->global_irq_base);
 }
 
 
@@ -772,7 +770,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic);
  
 
 #ifdef CONFIG_ACPI_NUMA
-acpi_status __init
+acpi_status __devinit
 acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret)
 {
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
@@ -825,4 +823,28 @@ acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret)
 	return AE_OK;
 }
 #endif /* CONFIG_NUMA */
+
+int
+acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	int err;
+
+	if ((err = iosapic_init(phys_addr, gsi_base)))
+		return err;
+
+#if CONFIG_ACPI_NUMA
+	acpi_map_iosapic(handle, 0, NULL, NULL);
+#endif /* CONFIG_ACPI_NUMA */
+
+	return 0;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int
+acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base)
+{
+	return iosapic_remove(gsi_base);
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
 #endif /* CONFIG_ACPI_BOOT */
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 785a51b0ad8e..69f88d561d62 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -470,18 +470,6 @@ ENTRY(load_switch_stack)
 	br.cond.sptk.many b7
 END(load_switch_stack)
 
-GLOBAL_ENTRY(__ia64_syscall)
-	.regstk 6,0,0,0
-	mov r15=in5				// put syscall number in place
-	break __BREAK_SYSCALL
-	movl r2=errno
-	cmp.eq p6,p7=-1,r10
-	;;
-(p6)	st4 [r2]=r8
-(p6)	mov r8=-1
-	br.ret.sptk.many rp
-END(__ia64_syscall)
-
 GLOBAL_ENTRY(execve)
 	mov r15=__NR_execve			// put syscall number in place
 	break __BREAK_SYSCALL
@@ -637,7 +625,7 @@ END(ia64_ret_from_syscall)
  *	      r8-r11: restored (syscall return value(s))
  *		 r12: restored (user-level stack pointer)
  *		 r13: restored (user-level thread pointer)
- *		 r14: cleared
+ *		 r14: set to __kernel_syscall_via_epc
  *		 r15: restored (syscall #)
  *	     r16-r17: cleared
  *		 r18: user-level b6
@@ -658,7 +646,7 @@ END(ia64_ret_from_syscall)
  *		  pr: restored (user-level pr)
  *		  b0: restored (user-level rp)
  *	          b6: restored
- *		  b7: cleared
+ *		  b7: set to __kernel_syscall_via_epc
  *	     ar.unat: restored (user-level ar.unat)
  *	      ar.pfs: restored (user-level ar.pfs)
  *	      ar.rsc: restored (user-level ar.rsc)
@@ -704,72 +692,79 @@ ENTRY(ia64_leave_syscall)
 	;;
 (p6)	ld4 r31=[r18]				// load current_thread_info()->flags
 	ld8 r19=[r2],PT(B6)-PT(LOADRS)		// load ar.rsc value for "loadrs"
-	mov b7=r0		// clear b7
+	nop.i 0
 	;;
-	ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)	// load ar.bspstore (may be garbage)
+	mov r16=ar.bsp				// M2  get existing backing store pointer
 	ld8 r18=[r2],PT(R9)-PT(B6)		// load b6
 (p6)	and r15=TIF_WORK_MASK,r31		// any work other than TIF_SYSCALL_TRACE?
 	;;
-	mov r16=ar.bsp				// M2  get existing backing store pointer
+	ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)	// load ar.bspstore (may be garbage)
 (p6)	cmp4.ne.unc p6,p0=r15, r0		// any special work pending?
 (p6)	br.cond.spnt .work_pending_syscall
 	;;
 	// start restoring the state saved on the kernel stack (struct pt_regs):
 	ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
 	ld8 r11=[r3],PT(CR_IIP)-PT(R11)
-	mov f6=f0		// clear f6
+(pNonSys) break 0		//      bug check: we shouldn't be here if pNonSys is TRUE!
 	;;
 	invala			// M0|1 invalidate ALAT
-	rsm psr.i | psr.ic	// M2 initiate turning off of interrupt and interruption collection
-	mov f9=f0		// clear f9
+	rsm psr.i | psr.ic	// M2   turn off interrupts and interruption collection
+	cmp.eq p9,p0=r0,r0	// A    set p9 to indicate that we should restore cr.ifs
 
-	ld8 r29=[r2],16		// load cr.ipsr
-	ld8 r28=[r3],16			// load cr.iip
-	mov f8=f0		// clear f8
+	ld8 r29=[r2],16		// M0|1 load cr.ipsr
+	ld8 r28=[r3],16		// M0|1 load cr.iip
+	mov r22=r0		// A    clear r22
 	;;
 	ld8 r30=[r2],16		// M0|1 load cr.ifs
 	ld8 r25=[r3],16		// M0|1 load ar.unat
-	cmp.eq p9,p0=r0,r0	// set p9 to indicate that we should restore cr.ifs
+(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
 	;;
 	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
-	mov f10=f0		// clear f10
+(pKStk)	mov r22=psr			// M2   read PSR now that interrupts are disabled
+	nop 0
 	;;
-	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // load b0
-	ld8 r27=[r3],PT(PR)-PT(AR_RSC)	// load ar.rsc
-	mov f11=f0		// clear f11
+	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
+	ld8 r27=[r3],PT(PR)-PT(AR_RSC)	// M0|1 load ar.rsc
+	mov f6=f0			// F    clear f6
 	;;
-	ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT)	// load ar.rnat (may be garbage)
-	ld8 r31=[r3],PT(R1)-PT(PR)		// load predicates
-(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+	ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT)	// M0|1 load ar.rnat (may be garbage)
+	ld8 r31=[r3],PT(R1)-PT(PR)		// M0|1 load predicates
+	mov f7=f0				// F    clear f7
 	;;
-	ld8 r20=[r2],PT(R12)-PT(AR_FPSR)	// load ar.fpsr
-	ld8.fill r1=[r3],16	// load r1
-(pUStk) mov r17=1
+	ld8 r20=[r2],PT(R12)-PT(AR_FPSR)	// M0|1 load ar.fpsr
+	ld8.fill r1=[r3],16			// M0|1 load r1
+(pUStk) mov r17=1				// A
 	;;
-	srlz.d			// M0  ensure interruption collection is off
-	ld8.fill r13=[r3],16
-	mov f7=f0		// clear f7
+(pUStk) st1 [r14]=r17				// M2|3
+	ld8.fill r13=[r3],16			// M0|1
+	mov f8=f0				// F    clear f8
 	;;
-	ld8.fill r12=[r2]	// restore r12 (sp)
-	mov.m ar.ssd=r0		// M2 clear ar.ssd
-	mov r22=r0		// clear r22
+	ld8.fill r12=[r2]			// M0|1 restore r12 (sp)
+	ld8.fill r15=[r3]			// M0|1 restore r15
+	mov b6=r18				// I0   restore b6
 
-	ld8.fill r15=[r3]	// restore r15
-(pUStk) st1 [r14]=r17
-	addl r3=THIS_CPU(ia64_phys_stacked_size_p8),r0
+	addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 // A
+	mov f9=f0					// F    clear f9
+(pKStk) br.cond.dpnt.many skip_rbs_switch		// B
+
+	srlz.d				// M0   ensure interruption collection is off (for cover)
+	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
+	cover				// B    add current frame into dirty partition & set cr.ifs
 	;;
-(pUStk)	ld4 r17=[r3]		// r17 = cpu_data->phys_stacked_size_p8
-	mov.m ar.csd=r0		// M2 clear ar.csd
-	mov b6=r18		// I0  restore b6
+(pUStk) ld4 r17=[r17]			// M0|1 r17 = cpu_data->phys_stacked_size_p8
+	mov r19=ar.bsp			// M2   get new backing store pointer
+	mov f10=f0			// F    clear f10
+
+	nop.m 0
+	movl r14=__kernel_syscall_via_epc // X
 	;;
-	mov r14=r0		// clear r14
-	shr.u r18=r19,16	// I0|1 get byte size of existing "dirty" partition
-(pKStk) br.cond.dpnt.many skip_rbs_switch
+	mov.m ar.csd=r0			// M2   clear ar.csd
+	mov.m ar.ccv=r0			// M2   clear ar.ccv
+	mov b7=r14			// I0   clear b7 (hint with __kernel_syscall_via_epc)
 
-	mov.m ar.ccv=r0		// clear ar.ccv
-(pNonSys) br.cond.dpnt.many dont_preserve_current_frame
-	br.cond.sptk.many rbs_switch
+	mov.m ar.ssd=r0			// M2   clear ar.ssd
+	mov f11=f0			// F    clear f11
+	br.cond.sptk.many rbs_switch	// B
 END(ia64_leave_syscall)
 
 #ifdef CONFIG_IA32_SUPPORT
@@ -885,7 +880,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	ldf.fill f7=[r2],PT(F11)-PT(F7)
 	ldf.fill f8=[r3],32
 	;;
-	srlz.i			// ensure interruption collection is off
+	srlz.d	// ensure that inter. collection is off (VHPT is don't care, since text is pinned)
 	mov ar.ccv=r15
 	;;
 	ldf.fill f11=[r2]
@@ -945,11 +940,10 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * NOTE: alloc, loadrs, and cover can't be predicated.
 	 */
 (pNonSys) br.cond.dpnt dont_preserve_current_frame
-
-rbs_switch:
 	cover				// add current frame into dirty partition and set cr.ifs
 	;;
 	mov r19=ar.bsp			// get new backing store pointer
+rbs_switch:
 	sub r16=r16,r18			// krbs = old bsp - size of dirty partition
 	cmp.ne p9,p0=r0,r0		// clear p9 to skip restore of cr.ifs
 	;;
@@ -1024,14 +1018,14 @@ rse_clear_invalid:
 	mov loc5=0
 	mov loc6=0
 	mov loc7=0
-(pRecurse) br.call.sptk.few b0=rse_clear_invalid
+(pRecurse) br.call.dptk.few b0=rse_clear_invalid
 	;;
 	mov loc8=0
 	mov loc9=0
 	cmp.ne pReturn,p0=r0,in1	// if recursion count != 0, we need to do a br.ret
 	mov loc10=0
 	mov loc11=0
-(pReturn) br.ret.sptk.many b0
+(pReturn) br.ret.dptk.many b0
 #endif /* !CONFIG_ITANIUM */
 #	undef pRecurse
 #	undef pReturn
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 962b6c4e32b5..7d7684a369d3 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -531,93 +531,114 @@ GLOBAL_ENTRY(fsys_bubble_down)
 	.altrp b6
 	.body
 	/*
-	 * We get here for syscalls that don't have a lightweight handler.  For those, we
-	 * need to bubble down into the kernel and that requires setting up a minimal
-	 * pt_regs structure, and initializing the CPU state more or less as if an
-	 * interruption had occurred.  To make syscall-restarts work, we setup pt_regs
-	 * such that cr_iip points to the second instruction in syscall_via_break.
-	 * Decrementing the IP hence will restart the syscall via break and not
-	 * decrementing IP will return us to the caller, as usual.  Note that we preserve
-	 * the value of psr.pp rather than initializing it from dcr.pp.  This makes it
-	 * possible to distinguish fsyscall execution from other privileged execution.
+	 * We get here for syscalls that don't have a lightweight
+	 * handler.  For those, we need to bubble down into the kernel
+	 * and that requires setting up a minimal pt_regs structure,
+	 * and initializing the CPU state more or less as if an
+	 * interruption had occurred.  To make syscall-restarts work,
+	 * we setup pt_regs such that cr_iip points to the second
+	 * instruction in syscall_via_break.  Decrementing the IP
+	 * hence will restart the syscall via break and not
+	 * decrementing IP will return us to the caller, as usual.
+	 * Note that we preserve the value of psr.pp rather than
+	 * initializing it from dcr.pp.  This makes it possible to
+	 * distinguish fsyscall execution from other privileged
+	 * execution.
 	 *
 	 * On entry:
-	 *	- normal fsyscall handler register usage, except that we also have:
+	 *	- normal fsyscall handler register usage, except
+	 *	  that we also have:
 	 *	- r18: address of syscall entry point
 	 *	- r21: ar.fpsr
 	 *	- r26: ar.pfs
 	 *	- r27: ar.rsc
 	 *	- r29: psr
+	 *
+	 * We used to clear some PSR bits here but that requires slow
+	 * serialization.  Fortuntely, that isn't really necessary.
+	 * The rationale is as follows: we used to clear bits
+	 * ~PSR_PRESERVED_BITS in PSR.L.  Since
+	 * PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we
+	 * ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}.
+	 * However,
+	 *
+	 * PSR.BE : already is turned off in __kernel_syscall_via_epc()
+	 * PSR.AC : don't care (kernel normally turns PSR.AC on)
+	 * PSR.I  : already turned off by the time fsys_bubble_down gets
+	 *	    invoked
+	 * PSR.DFL: always 0 (kernel never turns it on)
+	 * PSR.DFH: don't care --- kernel never touches f32-f127 on its own
+	 *	    initiative
+	 * PSR.DI : always 0 (kernel never turns it on)
+	 * PSR.SI : always 0 (kernel never turns it on)
+	 * PSR.DB : don't care --- kernel never enables kernel-level
+	 *	    breakpoints
+	 * PSR.TB : must be 0 already; if it wasn't zero on entry to
+	 *          __kernel_syscall_via_epc, the branch to fsys_bubble_down
+	 *          will trigger a taken branch; the taken-trap-handler then
+	 *          converts the syscall into a break-based system-call.
 	 */
-#	define PSR_PRESERVED_BITS	(IA64_PSR_UP | IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_PK \
-					 | IA64_PSR_DT | IA64_PSR_PP | IA64_PSR_SP | IA64_PSR_RT \
-					 | IA64_PSR_IC)
 	/*
-	 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc.  The rest we have
-	 * to synthesize.
+	 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc.
+	 * The rest we have to synthesize.
 	 */
-#	define PSR_ONE_BITS		((3 << IA64_PSR_CPL0_BIT) | (0x1 << IA64_PSR_RI_BIT) \
+#	define PSR_ONE_BITS		((3 << IA64_PSR_CPL0_BIT)	\
+					 | (0x1 << IA64_PSR_RI_BIT)	\
 					 | IA64_PSR_BN | IA64_PSR_I)
 
-	invala
-	movl r8=PSR_ONE_BITS
+	invala					// M0|1
+	movl r14=ia64_ret_from_syscall		// X
 
-	mov r25=ar.unat			// save ar.unat (5 cyc)
-	movl r9=PSR_PRESERVED_BITS
+	nop.m 0
+	movl r28=__kernel_syscall_via_break	// X	create cr.iip
+	;;
 
-	mov ar.rsc=0			// set enforced lazy mode, pl 0, little-endian, loadrs=0
-	movl r28=__kernel_syscall_via_break
+	mov r2=r16				// A    get task addr to addl-addressable register
+	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // A
+	mov r31=pr				// I0   save pr (2 cyc)
 	;;
-	mov r23=ar.bspstore		// save ar.bspstore (12 cyc)
-	mov r31=pr			// save pr (2 cyc)
-	mov r20=r1			// save caller's gp in r20
+	st1 [r16]=r0				// M2|3 clear current->thread.on_ustack flag
+	addl r22=IA64_RBS_OFFSET,r2		// A    compute base of RBS
+	add r3=TI_FLAGS+IA64_TASK_SIZE,r2	// A
 	;;
-	mov r2=r16			// copy current task addr to addl-addressable register
-	and r9=r9,r29
-	mov r19=b6			// save b6 (2 cyc)
+	ld4 r3=[r3]				// M0|1 r3 = current_thread_info()->flags
+	lfetch.fault.excl.nt1 [r22]		// M0|1 prefetch register backing-store
+	nop.i 0
 	;;
-	mov psr.l=r9			// slam the door (17 cyc to srlz.i)
-	or r29=r8,r29			// construct cr.ipsr value to save
-	addl r22=IA64_RBS_OFFSET,r2	// compute base of RBS
+	mov ar.rsc=0				// M2   set enforced lazy mode, pl 0, LE, loadrs=0
+	nop.m 0
+	nop.i 0
 	;;
-	// GAS reports a spurious RAW hazard on the read of ar.rnat because it thinks
-	// we may be reading ar.itc after writing to psr.l.  Avoid that message with
-	// this directive:
-	dv_serialize_data
-	mov.m r24=ar.rnat		// read ar.rnat (5 cyc lat)
-	lfetch.fault.excl.nt1 [r22]
-	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r2
-
-	// ensure previous insn group is issued before we stall for srlz.i:
+	mov r23=ar.bspstore			// M2 (12 cyc) save ar.bspstore
+	mov.m r24=ar.rnat			// M2 (5 cyc) read ar.rnat (dual-issues!)
+	nop.i 0
 	;;
-	srlz.i				// ensure new psr.l has been established
-	/////////////////////////////////////////////////////////////////////////////
-	////////// from this point on, execution is not interruptible anymore
-	/////////////////////////////////////////////////////////////////////////////
-	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2	// compute base of memory stack
-	cmp.ne pKStk,pUStk=r0,r0	// set pKStk <- 0, pUStk <- 1
+	mov ar.bspstore=r22			// M2 (6 cyc) switch to kernel RBS
+	movl r8=PSR_ONE_BITS			// X
 	;;
-	st1 [r16]=r0			// clear current->thread.on_ustack flag
-	mov ar.bspstore=r22		// switch to kernel RBS
-	mov b6=r18			// copy syscall entry-point to b6 (7 cyc)
-	add r3=TI_FLAGS+IA64_TASK_SIZE,r2
+	mov r25=ar.unat				// M2 (5 cyc) save ar.unat
+	mov r19=b6				// I0   save b6 (2 cyc)
+	mov r20=r1				// A    save caller's gp in r20
 	;;
-	ld4 r3=[r3]				// r2 = current_thread_info()->flags
-	mov r18=ar.bsp			// save (kernel) ar.bsp (12 cyc)
-	mov ar.rsc=0x3			// set eager mode, pl 0, little-endian, loadrs=0
-	br.call.sptk.many b7=ia64_syscall_setup
-	;;
-	ssm psr.i
-	movl r2=ia64_ret_from_syscall
+	or r29=r8,r29				// A    construct cr.ipsr value to save
+	mov b6=r18				// I0   copy syscall entry-point to b6 (7 cyc)
+	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // A compute base of memory stack
+
+	mov r18=ar.bsp				// M2   save (kernel) ar.bsp (12 cyc)
+	cmp.ne pKStk,pUStk=r0,r0		// A    set pKStk <- 0, pUStk <- 1
+	br.call.sptk.many b7=ia64_syscall_setup	// B
 	;;
-	mov rp=r2				// set the real return addr
-	and r3=_TIF_SYSCALL_TRACEAUDIT,r3
+	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
+	mov rp=r14				// I0   set the real return addr
+	and r3=_TIF_SYSCALL_TRACEAUDIT,r3	// A
 	;;
-	cmp.eq p8,p0=r3,r0
+	ssm psr.i				// M2   we're on kernel stacks now, reenable irqs
+	cmp.eq p8,p0=r3,r0			// A
+(p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
 
-(p10)	br.cond.spnt.many ia64_ret_from_syscall	// p10==true means out registers are more than 8
-(p8)	br.call.sptk.many b6=b6		// ignore this return addr
-	br.cond.sptk ia64_trace_syscall
+	nop.m 0
+(p8)	br.call.sptk.many b6=b6			// B    (ignore return address)
+	br.cond.spnt ia64_trace_syscall		// B
 END(fsys_bubble_down)
 
 	.rodata
diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S
index facf75acdc85..86948ce63e43 100644
--- a/arch/ia64/kernel/gate.S
+++ b/arch/ia64/kernel/gate.S
@@ -72,38 +72,40 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
 	 * bundle get executed.  The remaining code must be safe even if
 	 * they do not get executed.
 	 */
-	adds r17=-1024,r15
-	mov r10=0				// default to successful syscall execution
-	epc
+	adds r17=-1024,r15			// A
+	mov r10=0				// A    default to successful syscall execution
+	epc					// B	causes split-issue
 }
 	;;
-	rsm psr.be // note: on McKinley "rsm psr.be/srlz.d" is slightly faster than "rum psr.be"
-	LOAD_FSYSCALL_TABLE(r14)
-
-	mov r16=IA64_KR(CURRENT)		// 12 cycle read latency
-	tnat.nz p10,p9=r15
-	mov r19=NR_syscalls-1
+	rsm psr.be | psr.i			// M2 (5 cyc to srlz.d)
+	LOAD_FSYSCALL_TABLE(r14)		// X
 	;;
-	shladd r18=r17,3,r14
-
-	srlz.d
-	cmp.ne p8,p0=r0,r0			// p8 <- FALSE
-	/* Note: if r17 is a NaT, p6 will be set to zero.  */
-	cmp.geu p6,p7=r19,r17			// (syscall > 0 && syscall < 1024+NR_syscalls)?
-	;;
-(p6)	ld8 r18=[r18]
-	mov r21=ar.fpsr
-	add r14=-8,r14				// r14 <- addr of fsys_bubble_down entry
-	;;
-(p6)	mov b7=r18
-(p6)	tbit.z p8,p0=r18,0
-(p8)	br.dptk.many b7
-
-(p6)	rsm psr.i
-	mov r27=ar.rsc
-	mov r26=ar.pfs
+	mov r16=IA64_KR(CURRENT)		// M2 (12 cyc)
+	shladd r18=r17,3,r14			// A
+	mov r19=NR_syscalls-1			// A
+	;;
+	lfetch [r18]				// M0|1
+	mov r29=psr				// M2 (12 cyc)
+	// If r17 is a NaT, p6 will be zero
+	cmp.geu p6,p7=r19,r17			// A    (sysnr > 0 && sysnr < 1024+NR_syscalls)?
+	;;
+	mov r21=ar.fpsr				// M2 (12 cyc)
+	tnat.nz p10,p9=r15			// I0
+	mov.i r26=ar.pfs			// I0 (would stall anyhow due to srlz.d...)
+	;;
+	srlz.d					// M0 (forces split-issue) ensure PSR.BE==0
+(p6)	ld8 r18=[r18]				// M0|1
+	nop.i 0
+	;;
+	nop.m 0
+(p6)	tbit.z.unc p8,p0=r18,0			// I0 (dual-issues with "mov b7=r18"!)
+	nop.i 0
 	;;
-	mov r29=psr				// read psr (12 cyc load latency)
+(p8)	ssm psr.i
+(p6)	mov b7=r18				// I0
+(p8)	br.dptk.many b7				// B
+
+	mov r27=ar.rsc				// M2 (12 cyc)
 /*
  * brl.cond doesn't work as intended because the linker would convert this branch
  * into a branch to a PLT.  Perhaps there will be a way to avoid this with some
@@ -111,6 +113,8 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
  * instead.
  */
 #ifdef CONFIG_ITANIUM
+(p6)	add r14=-8,r14				// r14 <- addr of fsys_bubble_down entry
+	;;
 (p6)	ld8 r14=[r14]				// r14 <- fsys_bubble_down
 	;;
 (p6)	mov b7=r14
@@ -118,7 +122,7 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
 #else
 	BRL_COND_FSYS_BUBBLE_DOWN(p6)
 #endif
-
+	ssm psr.i
 	mov r10=-1
 (p10)	mov r8=EINVAL
 (p9)	mov r8=ENOSYS
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 7bbf019c9867..01572814abe4 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -58,9 +58,6 @@ EXPORT_SYMBOL(__strlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__strnlen_user);
 
-#include <asm/unistd.h>
-EXPORT_SYMBOL(__ia64_syscall);
-
 /* from arch/ia64/lib */
 extern void __divsi3(void);
 extern void __udivsi3(void);
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 88b014381df5..c170be095ccd 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -129,14 +129,13 @@ static struct iosapic {
 	char __iomem	*addr;		/* base address of IOSAPIC */
 	unsigned int 	gsi_base;	/* first GSI assigned to this IOSAPIC */
 	unsigned short 	num_rte;	/* number of RTE in this IOSAPIC */
+	int		rtes_inuse;	/* # of RTEs in use on this IOSAPIC */
 #ifdef CONFIG_NUMA
 	unsigned short	node;		/* numa node association via pxm */
 #endif
 } iosapic_lists[NR_IOSAPICS];
 
-static int num_iosapic;
-
-static unsigned char pcat_compat __initdata;	/* 8259 compatibility flag */
+static unsigned char pcat_compat __devinitdata;	/* 8259 compatibility flag */
 
 static int iosapic_kmalloc_ok;
 static LIST_HEAD(free_rte_list);
@@ -149,7 +148,7 @@ find_iosapic (unsigned int gsi)
 {
 	int i;
 
-	for (i = 0; i < num_iosapic; i++) {
+	for (i = 0; i < NR_IOSAPICS; i++) {
 		if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < iosapic_lists[i].num_rte)
 			return i;
 	}
@@ -598,6 +597,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery,
 		rte->refcnt++;
 		list_add_tail(&rte->rte_list, &iosapic_intr_info[vector].rtes);
 		iosapic_intr_info[vector].count++;
+		iosapic_lists[index].rtes_inuse++;
 	}
 	else if (vector_is_shared(vector)) {
 		struct iosapic_intr_info *info = &iosapic_intr_info[vector];
@@ -778,7 +778,7 @@ void
 iosapic_unregister_intr (unsigned int gsi)
 {
 	unsigned long flags;
-	int irq, vector;
+	int irq, vector, index;
 	irq_desc_t *idesc;
 	u32 low32;
 	unsigned long trigger, polarity;
@@ -819,6 +819,9 @@ iosapic_unregister_intr (unsigned int gsi)
 		list_del(&rte->rte_list);
 		iosapic_intr_info[vector].count--;
 		iosapic_free_rte(rte);
+		index = find_iosapic(gsi);
+		iosapic_lists[index].rtes_inuse--;
+		WARN_ON(iosapic_lists[index].rtes_inuse < 0);
 
 		trigger	 = iosapic_intr_info[vector].trigger;
 		polarity = iosapic_intr_info[vector].polarity;
@@ -952,30 +955,86 @@ iosapic_system_init (int system_pcat_compat)
 	}
 }
 
-void __init
+static inline int
+iosapic_alloc (void)
+{
+	int index;
+
+	for (index = 0; index < NR_IOSAPICS; index++)
+		if (!iosapic_lists[index].addr)
+			return index;
+
+	printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__);
+	return -1;
+}
+
+static inline void
+iosapic_free (int index)
+{
+	memset(&iosapic_lists[index], 0, sizeof(iosapic_lists[0]));
+}
+
+static inline int
+iosapic_check_gsi_range (unsigned int gsi_base, unsigned int ver)
+{
+	int index;
+	unsigned int gsi_end, base, end;
+
+	/* check gsi range */
+	gsi_end = gsi_base + ((ver >> 16) & 0xff);
+	for (index = 0; index < NR_IOSAPICS; index++) {
+		if (!iosapic_lists[index].addr)
+			continue;
+
+		base = iosapic_lists[index].gsi_base;
+		end  = base + iosapic_lists[index].num_rte - 1;
+
+		if (gsi_base < base && gsi_end < base)
+			continue;/* OK */
+
+		if (gsi_base > end && gsi_end > end)
+			continue; /* OK */
+
+		return -EBUSY;
+	}
+	return 0;
+}
+
+int __devinit
 iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
 {
-	int num_rte;
+	int num_rte, err, index;
 	unsigned int isa_irq, ver;
 	char __iomem *addr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iosapic_lock, flags);
+	{
+		addr = ioremap(phys_addr, 0);
+		ver = iosapic_version(addr);
 
-	addr = ioremap(phys_addr, 0);
-	ver = iosapic_version(addr);
+		if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
+			iounmap(addr);
+			spin_unlock_irqrestore(&iosapic_lock, flags);
+			return err;
+		}
 
-	/*
-	 * The MAX_REDIR register holds the highest input pin
-	 * number (starting from 0).
-	 * We add 1 so that we can use it for number of pins (= RTEs)
-	 */
-	num_rte = ((ver >> 16) & 0xff) + 1;
+		/*
+		 * The MAX_REDIR register holds the highest input pin
+		 * number (starting from 0).
+		 * We add 1 so that we can use it for number of pins (= RTEs)
+		 */
+		num_rte = ((ver >> 16) & 0xff) + 1;
 
-	iosapic_lists[num_iosapic].addr = addr;
-	iosapic_lists[num_iosapic].gsi_base = gsi_base;
-	iosapic_lists[num_iosapic].num_rte = num_rte;
+		index = iosapic_alloc();
+		iosapic_lists[index].addr = addr;
+		iosapic_lists[index].gsi_base = gsi_base;
+		iosapic_lists[index].num_rte = num_rte;
 #ifdef CONFIG_NUMA
-	iosapic_lists[num_iosapic].node = MAX_NUMNODES;
+		iosapic_lists[index].node = MAX_NUMNODES;
 #endif
-	num_iosapic++;
+	}
+	spin_unlock_irqrestore(&iosapic_lock, flags);
 
 	if ((gsi_base == 0) && pcat_compat) {
 		/*
@@ -986,10 +1045,43 @@ iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
 		for (isa_irq = 0; isa_irq < 16; ++isa_irq)
 			iosapic_override_isa_irq(isa_irq, isa_irq, IOSAPIC_POL_HIGH, IOSAPIC_EDGE);
 	}
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG
+int
+iosapic_remove (unsigned int gsi_base)
+{
+	int index, err = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iosapic_lock, flags);
+	{
+		index = find_iosapic(gsi_base);
+		if (index < 0) {
+			printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
+			       __FUNCTION__, gsi_base);
+			goto out;
+		}
+
+		if (iosapic_lists[index].rtes_inuse) {
+			err = -EBUSY;
+			printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
+			       __FUNCTION__, gsi_base);
+			goto out;
+		}
+
+		iounmap(iosapic_lists[index].addr);
+		iosapic_free(index);
+	}
+ out:
+	spin_unlock_irqrestore(&iosapic_lock, flags);
+	return err;
 }
+#endif /* CONFIG_HOTPLUG */
 
 #ifdef CONFIG_NUMA
-void __init
+void __devinit
 map_iosapic_to_node(unsigned int gsi_base, int node)
 {
 	int index;
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 2bc085a73e30..3bb3a13c4047 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1,7 +1,7 @@
 /*
  * arch/ia64/kernel/ivt.S
  *
- * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ * Copyright (C) 1998-2001, 2003, 2005 Hewlett-Packard Co
  *	Stephane Eranian <eranian@hpl.hp.com>
  *	David Mosberger <davidm@hpl.hp.com>
  * Copyright (C) 2000, 2002-2003 Intel Co
@@ -692,82 +692,118 @@ ENTRY(break_fault)
 	 * to prevent leaking bits from kernel to user level.
 	 */
 	DBG_FAULT(11)
-	mov r16=IA64_KR(CURRENT)		// r16 = current task; 12 cycle read lat.
-	mov r17=cr.iim
-	mov r18=__IA64_BREAK_SYSCALL
-	mov r21=ar.fpsr
-	mov r29=cr.ipsr
-	mov r19=b6
-	mov r25=ar.unat
-	mov r27=ar.rsc
-	mov r26=ar.pfs
-	mov r28=cr.iip
-	mov r31=pr				// prepare to save predicates
-	mov r20=r1
-	;;
+	mov.m r16=IA64_KR(CURRENT)		// M2 r16 <- current task (12 cyc)
+	mov r29=cr.ipsr				// M2 (12 cyc)
+	mov r31=pr				// I0 (2 cyc)
+
+	mov r17=cr.iim				// M2 (2 cyc)
+	mov.m r27=ar.rsc			// M2 (12 cyc)
+	mov r18=__IA64_BREAK_SYSCALL		// A
+
+	mov.m ar.rsc=0				// M2
+	mov.m r21=ar.fpsr			// M2 (12 cyc)
+	mov r19=b6				// I0 (2 cyc)
+	;;
+	mov.m r23=ar.bspstore			// M2 (12 cyc)
+	mov.m r24=ar.rnat			// M2 (5 cyc)
+	mov.i r26=ar.pfs			// I0 (2 cyc)
+
+	invala					// M0|1
+	nop.m 0					// M
+	mov r20=r1				// A			save r1
+
+	nop.m 0
+	movl r30=sys_call_table			// X
+
+	mov r28=cr.iip				// M2 (2 cyc)
+	cmp.eq p0,p7=r18,r17			// I0 is this a system call?
+(p7)	br.cond.spnt non_syscall		// B  no ->
+	//
+	// From this point on, we are definitely on the syscall-path
+	// and we can use (non-banked) scratch registers.
+	//
+///////////////////////////////////////////////////////////////////////
+	mov r1=r16				// A    move task-pointer to "addl"-addressable reg
+	mov r2=r16				// A    setup r2 for ia64_syscall_setup
+	add r9=TI_FLAGS+IA64_TASK_SIZE,r16	// A	r9 = &current_thread_info()->flags
+
 	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16
-	cmp.eq p0,p7=r18,r17			// is this a system call? (p7 <- false, if so)
-(p7)	br.cond.spnt non_syscall
+	adds r15=-1024,r15			// A    subtract 1024 from syscall number
+	mov r3=NR_syscalls - 1
 	;;
-	ld1 r17=[r16]				// load current->thread.on_ustack flag
-	st1 [r16]=r0				// clear current->thread.on_ustack flag
-	add r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16	// set r1 for MINSTATE_START_SAVE_MIN_VIRT
+	ld1.bias r17=[r16]			// M0|1 r17 = current->thread.on_ustack flag
+	ld4 r9=[r9]				// M0|1 r9 = current_thread_info()->flags
+	extr.u r8=r29,41,2			// I0   extract ei field from cr.ipsr
+
+	shladd r30=r15,3,r30			// A    r30 = sys_call_table + 8*(syscall-1024)
+	addl r22=IA64_RBS_OFFSET,r1		// A    compute base of RBS
+	cmp.leu p6,p7=r15,r3			// A    syscall number in range?
 	;;
-	invala
 
-	/* adjust return address so we skip over the break instruction: */
+	lfetch.fault.excl.nt1 [r22]		// M0|1 prefetch RBS
+(p6)	ld8 r30=[r30]				// M0|1 load address of syscall entry point
+	tnat.nz.or p7,p0=r15			// I0	is syscall nr a NaT?
 
-	extr.u r8=r29,41,2			// extract ei field from cr.ipsr
-	;;
-	cmp.eq p6,p7=2,r8			// isr.ei==2?
-	mov r2=r1				// setup r2 for ia64_syscall_setup
-	;;
-(p6)	mov r8=0				// clear ei to 0
-(p6)	adds r28=16,r28				// switch cr.iip to next bundle cr.ipsr.ei wrapped
-(p7)	adds r8=1,r8				// increment ei to next slot
-	;;
-	cmp.eq pKStk,pUStk=r0,r17		// are we in kernel mode already?
-	dep r29=r8,r29,41,2			// insert new ei into cr.ipsr
+	mov.m ar.bspstore=r22			// M2   switch to kernel RBS
+	cmp.eq p8,p9=2,r8			// A    isr.ei==2?
 	;;
 
-	// switch from user to kernel RBS:
-	MINSTATE_START_SAVE_MIN_VIRT
-	br.call.sptk.many b7=ia64_syscall_setup
-	;;
-	MINSTATE_END_SAVE_MIN_VIRT		// switch to bank 1
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	mov r3=NR_syscalls - 1
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	// p10==true means out registers are more than 8 or r15's Nat is true
-(p10)	br.cond.spnt.many ia64_ret_from_syscall
-	;;
-	movl r16=sys_call_table
+(p8)	mov r8=0				// A    clear ei to 0
+(p7)	movl r30=sys_ni_syscall			// X
 
-	adds r15=-1024,r15			// r15 contains the syscall number---subtract 1024
-	movl r2=ia64_ret_from_syscall
-	;;
-	shladd r20=r15,3,r16			// r20 = sys_call_table + 8*(syscall-1024)
-	cmp.leu p6,p7=r15,r3			// (syscall > 0 && syscall < 1024 + NR_syscalls) ?
-	mov rp=r2				// set the real return addr
+(p8)	adds r28=16,r28				// A    switch cr.iip to next bundle
+(p9)	adds r8=1,r8				// A    increment ei to next slot
+	nop.i 0
 	;;
-(p6)	ld8 r20=[r20]				// load address of syscall entry point
-(p7)	movl r20=sys_ni_syscall
 
-	add r2=TI_FLAGS+IA64_TASK_SIZE,r13
-	;;
-	ld4 r2=[r2]				// r2 = current_thread_info()->flags
-	;;
-	and r2=_TIF_SYSCALL_TRACEAUDIT,r2	// mask trace or audit
+	mov.m r25=ar.unat			// M2 (5 cyc)
+	dep r29=r8,r29,41,2			// I0   insert new ei into cr.ipsr
+	adds r15=1024,r15			// A    restore original syscall number
+	//
+	// If any of the above loads miss in L1D, we'll stall here until
+	// the data arrives.
+	//
+///////////////////////////////////////////////////////////////////////
+	st1 [r16]=r0				// M2|3 clear current->thread.on_ustack flag
+	mov b6=r30				// I0   setup syscall handler branch reg early
+	cmp.eq pKStk,pUStk=r0,r17		// A    were we on kernel stacks already?
+
+	and r9=_TIF_SYSCALL_TRACEAUDIT,r9	// A    mask trace or audit
+	mov r18=ar.bsp				// M2 (12 cyc)
+(pKStk)	br.cond.spnt .break_fixup		// B	we're already in kernel-mode -- fix up RBS
+	;;
+.back_from_break_fixup:
+(pUStk)	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1 // A    compute base of memory stack
+	cmp.eq p14,p0=r9,r0			// A    are syscalls being traced/audited?
+	br.call.sptk.many b7=ia64_syscall_setup	// B
+1:
+	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
+	nop 0
+	bsw.1					// B (6 cyc) regs are saved, switch to bank 1
 	;;
-	cmp.eq p8,p0=r2,r0
-	mov b6=r20
+
+	ssm psr.ic | PSR_DEFAULT_BITS		// M2	now it's safe to re-enable intr.-collection
+	movl r3=ia64_ret_from_syscall		// X
 	;;
-(p8)	br.call.sptk.many b6=b6			// ignore this return addr
-	br.cond.sptk ia64_trace_syscall
+
+	srlz.i					// M0   ensure interruption collection is on
+	mov rp=r3				// I0   set the real return addr
+(p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
+
+(p15)	ssm psr.i				// M2   restore psr.i
+(p14)	br.call.sptk.many b6=b6			// B    invoke syscall-handker (ignore return addr)
+	br.cond.spnt.many ia64_trace_syscall	// B	do syscall-tracing thingamagic
 	// NOT REACHED
+///////////////////////////////////////////////////////////////////////
+	// On entry, we optimistically assumed that we're coming from user-space.
+	// For the rare cases where a system-call is done from within the kernel,
+	// we fix things up at this point:
+.break_fixup:
+	add r1=-IA64_PT_REGS_SIZE,sp		// A    allocate space for pt_regs structure
+	mov ar.rnat=r24				// M2	restore kernel's AR.RNAT
+	;;
+	mov ar.bspstore=r23			// M2	restore kernel's AR.BSPSTORE
+	br.cond.sptk .back_from_break_fixup
 END(break_fault)
 
 	.org ia64_ivt+0x3000
@@ -842,8 +878,6 @@ END(interrupt)
 	 *	- r31: saved pr
 	 *	-  b0: original contents (to be saved)
 	 * On exit:
-	 *	- executing on bank 1 registers
-	 *	- psr.ic enabled, interrupts restored
 	 *	-  p10: TRUE if syscall is invoked with more than 8 out
 	 *		registers or r15's Nat is true
 	 *	-  r1: kernel's gp
@@ -851,8 +885,11 @@ END(interrupt)
 	 *	-  r8: -EINVAL if p10 is true
 	 *	- r12: points to kernel stack
 	 *	- r13: points to current task
+	 *	- r14: preserved (same as on entry)
+	 *	- p13: preserved
 	 *	- p15: TRUE if interrupts need to be re-enabled
 	 *	- ar.fpsr: set to kernel settings
+	 *	-  b6: preserved (same as on entry)
 	 */
 GLOBAL_ENTRY(ia64_syscall_setup)
 #if PT(B6) != 0
@@ -920,10 +957,10 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 (p13)	mov in5=-1
 	;;
 	st8 [r16]=r21,PT(R8)-PT(AR_FPSR)	// save ar.fpsr
-	tnat.nz p14,p0=in6
+	tnat.nz p13,p0=in6
 	cmp.lt p10,p9=r11,r8	// frame size can't be more than local+8
 	;;
-	stf8 [r16]=f1		// ensure pt_regs.r8 != 0 (see handle_syscall_error)
+	mov r8=1
 (p9)	tnat.nz p10,p0=r15
 	adds r12=-16,r1		// switch to kernel memory stack (with 16 bytes of scratch)
 
@@ -934,9 +971,9 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 	mov r13=r2				// establish `current'
 	movl r1=__gp				// establish kernel global pointer
 	;;
-(p14)	mov in6=-1
+	st8 [r16]=r8		// ensure pt_regs.r8 != 0 (see handle_syscall_error)
+(p13)	mov in6=-1
 (p8)	mov in7=-1
-	nop.i 0
 
 	cmp.eq pSys,pNonSys=r0,r0		// set pSys=1, pNonSys=0
 	movl r17=FPSR_DEFAULT
@@ -1007,6 +1044,8 @@ END(dispatch_illegal_op_fault)
 	FAULT(17)
 
 ENTRY(non_syscall)
+	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
+	;;
 	SAVE_MIN_WITH_COVER
 
 	// There is no particular reason for this code to be here, other than that
@@ -1204,6 +1243,25 @@ END(disabled_fp_reg)
 // 0x5600 Entry 26 (size 16 bundles) Nat Consumption (11,23,37,50)
 ENTRY(nat_consumption)
 	DBG_FAULT(26)
+
+	mov r16=cr.ipsr
+	mov r17=cr.isr
+	mov r31=pr				// save PR
+	;;
+	and r18=0xf,r17				// r18 = cr.ipsr.code{3:0}
+	tbit.z p6,p0=r17,IA64_ISR_NA_BIT
+	;;
+	cmp.ne.or p6,p0=IA64_ISR_CODE_LFETCH,r18
+	dep r16=-1,r16,IA64_PSR_ED_BIT,1
+(p6)	br.cond.spnt 1f		// branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
+	;;
+	mov cr.ipsr=r16		// set cr.ipsr.na
+	mov pr=r31,-1
+	;;
+	rfi
+
+1:	mov pr=r31,-1
+	;;
 	FAULT(26)
 END(nat_consumption)
 
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 6d57aebad485..bbb8bc7c0552 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -725,12 +725,32 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs  *pt,
 			break;
 	}
 
+	/*
+	 * Note: at the time of this call, the target task is blocked
+	 * in notify_resume_user() and by clearling PRED_LEAVE_SYSCALL
+	 * (aka, "pLvSys") we redirect execution from
+	 * .work_pending_syscall_end to .work_processed_kernel.
+	 */
 	unw_get_pr(&prev_info, &pr);
-	pr &= ~(1UL << PRED_SYSCALL);
+	pr &= ~((1UL << PRED_SYSCALL) | (1UL << PRED_LEAVE_SYSCALL));
 	pr |=  (1UL << PRED_NON_SYSCALL);
 	unw_set_pr(&prev_info, pr);
 
 	pt->cr_ifs = (1UL << 63) | cfm;
+	/*
+	 * Clear the memory that is NOT written on syscall-entry to
+	 * ensure we do not leak kernel-state to user when execution
+	 * resumes.
+	 */
+	pt->r2 = 0;
+	pt->r3 = 0;
+	pt->r14 = 0;
+	memset(&pt->r16, 0, 16*8);	/* clear r16-r31 */
+	memset(&pt->f6, 0, 6*16);	/* clear f6-f11 */
+	pt->b7 = 0;
+	pt->ar_ccv = 0;
+	pt->ar_csd = 0;
+	pt->ar_ssd = 0;
 }
 
 static int
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index d14692e0920a..2693e1522d7c 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -72,6 +72,8 @@ DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8);
 unsigned long ia64_cycles_per_usec;
 struct ia64_boot_param *ia64_boot_param;
 struct screen_info screen_info;
+unsigned long vga_console_iobase;
+unsigned long vga_console_membase;
 
 unsigned long ia64_max_cacheline_size;
 unsigned long ia64_iobase;	/* virtual address for I/O accesses */
@@ -273,23 +275,25 @@ io_port_init (void)
 static inline int __init
 early_console_setup (char *cmdline)
 {
+	int earlycons = 0;
+
 #ifdef CONFIG_SERIAL_SGI_L1_CONSOLE
 	{
 		extern int sn_serial_console_early_setup(void);
 		if (!sn_serial_console_early_setup())
-			return 0;
+			earlycons++;
 	}
 #endif
 #ifdef CONFIG_EFI_PCDP
 	if (!efi_setup_pcdp_console(cmdline))
-		return 0;
+		earlycons++;
 #endif
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	if (!early_serial_console_init(cmdline))
-		return 0;
+		earlycons++;
 #endif
 
-	return -1;
+	return (earlycons) ? 0 : -1;
 }
 
 static inline void
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index b49d4ddaab93..0166a9847095 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -231,13 +231,16 @@ smp_flush_tlb_all (void)
 void
 smp_flush_tlb_mm (struct mm_struct *mm)
 {
+	preempt_disable();
 	/* this happens for the common case of a single-threaded fork():  */
 	if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1))
 	{
 		local_finish_flush_tlb_mm(mm);
+		preempt_enable();
 		return;
 	}
 
+	preempt_enable();
 	/*
 	 * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
 	 * have been running in the address space.  It's not clear that this is worth the
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index e3fc4edea113..720a861f88be 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -312,7 +312,7 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
 			&info);
 
-	pbus = pci_scan_bus(bus, &pci_root_ops, controller);
+	pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller);
 	if (pbus)
 		pcibios_setup_root_windows(pbus, controller);
 
@@ -373,6 +373,25 @@ void pcibios_bus_to_resource(struct pci_dev *dev,
 	res->end = region->end + offset;
 }
 
+static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
+{
+	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+	struct resource *devr = &dev->resource[idx];
+
+	if (!dev->bus)
+		return 0;
+	for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) {
+		struct resource *busr = dev->bus->resource[i];
+
+		if (!busr || ((busr->flags ^ devr->flags) & type_mask))
+			continue;
+		if ((devr->start) && (devr->start >= busr->start) &&
+				(devr->end <= busr->end))
+			return 1;
+	}
+	return 0;
+}
+
 static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 {
 	struct pci_bus_region region;
@@ -386,7 +405,8 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 		region.start = dev->resource[i].start;
 		region.end = dev->resource[i].end;
 		pcibios_bus_to_resource(dev, &dev->resource[i], &region);
-		pci_claim_resource(dev, i);
+		if ((is_valid_resource(dev, i)))
+			pci_claim_resource(dev, i);
 	}
 }
 
@@ -398,6 +418,10 @@ pcibios_fixup_bus (struct pci_bus *b)
 {
 	struct pci_dev *dev;
 
+	if (b->self) {
+		pci_read_bridge_bases(b);
+		pcibios_fixup_device_resources(b->self);
+	}
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
 
@@ -418,18 +442,24 @@ pcibios_enable_resources (struct pci_dev *dev, int mask)
 	u16 cmd, old_cmd;
 	int idx;
 	struct resource *r;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
 
 	if (!dev)
 		return -EINVAL;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
+	for (idx=0; idx<PCI_NUM_RESOURCES; idx++) {
 		/* Only set up the desired resources.  */
 		if (!(mask & (1 << idx)))
 			continue;
 
 		r = &dev->resource[idx];
+		if (!(r->flags & type_mask))
+			continue;
+		if ((idx == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
 		if (!r->start && r->end) {
 			printk(KERN_ERR
 			       "PCI: Device %s not available because of resource collisions\n",
@@ -441,8 +471,6 @@ pcibios_enable_resources (struct pci_dev *dev, int mask)
 		if (r->flags & IORESOURCE_MEM)
 			cmd |= PCI_COMMAND_MEMORY;
 	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
 	if (cmd != old_cmd) {
 		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 9e07f5463f21..783eb4323847 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -384,7 +384,7 @@ static int __init sn_pci_init(void)
 	extern void register_sn_procfs(void);
 #endif
 
-	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_SIMULATOR())
+	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
 		return 0;
 
 	/*
diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c
index fec6d8b8237b..7ce3cdad627b 100644
--- a/arch/ia64/sn/kernel/iomv.c
+++ b/arch/ia64/sn/kernel/iomv.c
@@ -9,12 +9,16 @@
 #include <linux/module.h>
 #include <asm/io.h>
 #include <asm/delay.h>
+#include <asm/vga.h>
 #include <asm/sn/nodepda.h>
 #include <asm/sn/simulator.h>
 #include <asm/sn/pda.h>
 #include <asm/sn/sn_cpuid.h>
 #include <asm/sn/shub_mmr.h>
 
+#define IS_LEGACY_VGA_IOPORT(p) \
+	(((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df))
+
 /**
  * sn_io_addr - convert an in/out port to an i/o address
  * @port: port to convert
@@ -26,6 +30,8 @@
 void *sn_io_addr(unsigned long port)
 {
 	if (!IS_RUNNING_ON_SIMULATOR()) {
+		if (IS_LEGACY_VGA_IOPORT(port))
+			port += vga_console_iobase;
 		/* On sn2, legacy I/O ports don't point at anything */
 		if (port < (64 * 1024))
 			return NULL;
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 44bfc7f318cb..22e10d282c7f 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/machvec.h>
 #include <asm/system.h>
 #include <asm/processor.h>
+#include <asm/vga.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/pda.h>
@@ -95,6 +96,7 @@ u8 sn_coherency_id;
 EXPORT_SYMBOL(sn_coherency_id);
 u8 sn_region_size;
 EXPORT_SYMBOL(sn_region_size);
+int sn_prom_type;	/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
 
 short physical_node_map[MAX_PHYSNODE_ID];
 
@@ -273,14 +275,17 @@ void __init sn_setup(char **cmdline_p)
 
 	ia64_sn_plat_set_error_handling_features();
 
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	/*
-	 * If the generic code has enabled vga console support - lets
-	 * get rid of it again. This is a kludge for the fact that ACPI
-	 * currtently has no way of informing us if legacy VGA is available
-	 * or not.
+	 * If there was a primary vga adapter identified through the
+	 * EFI PCDP table, make it the preferred console.  Otherwise
+	 * zero out conswitchp.
 	 */
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-	if (conswitchp == &vga_con) {
+
+	if (vga_console_membase) {
+		/* usable vga ... make tty0 the preferred default console */
+		add_preferred_console("tty", 0, NULL);
+	} else {
 		printk(KERN_DEBUG "SGI: Disabling VGA console\n");
 #ifdef CONFIG_DUMMY_CONSOLE
 		conswitchp = &dummy_con;
@@ -350,7 +355,7 @@ void __init sn_setup(char **cmdline_p)
 
 	ia64_mark_idle = &snidle;
 
-	/* 
+	/*
 	 * For the bootcpu, we do this here. All other cpus will make the
 	 * call as part of cpu_init in slave cpu initialization.
 	 */
@@ -397,7 +402,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 		nodepdaindr[cnode] =
 		    alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
 		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
-		memset(nodepdaindr[cnode]->phys_cpuid, -1, 
+		memset(nodepdaindr[cnode]->phys_cpuid, -1,
 		    sizeof(nodepdaindr[cnode]->phys_cpuid));
 	}
 
@@ -427,7 +432,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	}
 
 	/*
-	 * Initialize the per node hubdev.  This includes IO Nodes and 
+	 * Initialize the per node hubdev.  This includes IO Nodes and
 	 * headless/memless nodes.
 	 */
 	for (cnode = 0; cnode < numionodes; cnode++) {
@@ -455,6 +460,14 @@ void __init sn_cpu_init(void)
 	int i;
 	static int wars_have_been_checked;
 
+	if (smp_processor_id() == 0 && IS_MEDUSA()) {
+		if (ia64_sn_is_fake_prom())
+			sn_prom_type = 2;
+		else
+			sn_prom_type = 1;
+		printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
+	}
+
 	memset(pda, 0, sizeof(pda));
 	if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
 				&sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
@@ -520,7 +533,7 @@ void __init sn_cpu_init(void)
 	 */
 	{
 		u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
-		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1, 
+		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
 			SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3};
 		u64 *pio;
 		pio = is_shub1() ? pio1 : pio2;
@@ -552,6 +565,10 @@ static void __init scan_for_ionodes(void)
 	int nasid = 0;
 	lboard_t *brd;
 
+	/* fakeprom does not support klgraph */
+	if (IS_RUNNING_ON_FAKE_PROM())
+		return;
+
 	/* Setup ionodes with memory */
 	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
 		char *klgraph_header;
@@ -563,8 +580,6 @@ static void __init scan_for_ionodes(void)
 		cnodeid = -1;
 		klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
 		if (!klgraph_header) {
-			if (IS_RUNNING_ON_SIMULATOR())
-				continue;
 			BUG();	/* All nodes must have klconfig tables! */
 		}
 		cnodeid = nasid_to_cnodeid(nasid);
@@ -630,8 +645,8 @@ int
 nasid_slice_to_cpuid(int nasid, int slice)
 {
 	long cpu;
-	
-	for (cpu=0; cpu < NR_CPUS; cpu++) 
+
+	for (cpu=0; cpu < NR_CPUS; cpu++)
 		if (cpuid_to_nasid(cpu) == nasid &&
 					cpuid_to_slice(cpu) == slice)
 			return cpu;
diff --git a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
index 7947312801ec..96cb71d15682 100644
--- a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
+++ b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
@@ -6,6 +6,7 @@
  * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
  */
 
+#include <asm/types.h>
 #include <asm/sn/shub_mmr.h>
 
 #define DEADLOCKBIT	SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index a087b274847e..8716f4d5314b 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -204,8 +204,8 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 	cx_dev->dev.parent = NULL;
 	cx_dev->dev.bus = &tiocx_bus_type;
 	cx_dev->dev.release = tiocx_bus_release;
-	snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d.0x%x",
-		 cx_dev->cx_id.nasid, cx_dev->cx_id.part_num);
+	snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d",
+		 cx_dev->cx_id.nasid);
 	device_register(&cx_dev->dev);
 	get_device(&cx_dev->dev);
 
@@ -236,7 +236,6 @@ int cx_device_unregister(struct cx_dev *cx_dev)
  */
 static int cx_device_reload(struct cx_dev *cx_dev)
 {
-	device_remove_file(&cx_dev->dev, &dev_attr_cxdev_control);
 	cx_device_unregister(cx_dev);
 	return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
 				  cx_dev->cx_id.mfg_num, cx_dev->hubdev);
@@ -383,6 +382,7 @@ static int is_fpga_brick(int nasid)
 	switch (tiocx_btchar_get(nasid)) {
 	case L1_BRICKTYPE_SA:
 	case L1_BRICKTYPE_ATHENA:
+	case L1_BRICKTYPE_DAYTONA:
 		return 1;
 	}
 	return 0;
@@ -409,7 +409,7 @@ static int tiocx_reload(struct cx_dev *cx_dev)
 		uint64_t cx_id;
 
 		cx_id =
-		    *(volatile int32_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+		    *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
 					  WIDGET_ID);
 		part_num = XWIDGET_PART_NUM(cx_id);
 		mfg_num = XWIDGET_MFG_NUM(cx_id);
@@ -458,6 +458,10 @@ static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *
 
 	switch (n) {
 	case 1:
+		tio_corelet_reset(cx_dev->cx_id.nasid, TIOCX_CORELET);
+		tiocx_reload(cx_dev);
+		break;
+	case 2:
 		tiocx_reload(cx_dev);
 		break;
 	case 3:
@@ -537,7 +541,7 @@ static void __exit tiocx_exit(void)
 	bus_unregister(&tiocx_bus_type);
 }
 
-module_init(tiocx_init);
+subsys_initcall(tiocx_init);
 module_exit(tiocx_exit);
 
 /************************************************************************
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 8dae9eb45456..05aa8c2fe9bb 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -336,7 +336,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
 	if (!ct_addr)
 		return 0;
 
-	bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffff);
+	bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffffUL);
 	node_upper = ct_addr >> 48;
 
 	if (node_upper > 64) {
@@ -464,7 +464,7 @@ map_return:
  * For mappings created using the direct modes (64 or 48) there are no
  * resources to release.
  */
-void
+static void
 tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 {
 	int i, entry;
@@ -514,7 +514,7 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
  * The mapping mode used is based on the devices dma_mask.  As a last resort
  * use the GART mapped mode.
  */
-uint64_t
+static uint64_t
 tioca_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
 {
 	uint64_t mapaddr;
@@ -580,7 +580,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
  * On successful setup, returns the kernel version of tioca_common back to
  * the caller.
  */
-void *
+static void *
 tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft)
 {
 	struct tioca_common *tioca_common;
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 872085dea8a8..6efaa9293eef 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -506,7 +506,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index d28ebfa1070d..30fc03ed0cfb 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -662,7 +662,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 1700d7aec686..46c9511f3229 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -514,7 +514,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index b27980161c31..67aca6ccc9b0 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -661,7 +661,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index ebd6301aa599..fdae21c503d7 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -517,7 +517,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 6d7b92d72458..70cfb6ffd877 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -1495,7 +1495,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 		*offset += hose->pci_mem_offset;
 		res_bit = IORESOURCE_MEM;
 	} else {
-		io_offset = (unsigned long)hose->io_base_virt;
+		io_offset = hose->io_base_virt - ___IO_BASE;
 		*offset += io_offset;
 		res_bit = IORESOURCE_IO;
 	}
@@ -1522,7 +1522,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 
 		/* found it! construct the final physical address */
 		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - _IO_BASE;
+			*offset += hose->io_base_phys - io_offset;
 		return rp;
 	}
 
@@ -1739,6 +1739,23 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
 	return result;
 }
 
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  u64 *start, u64 *end)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+	unsigned long offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+
+	*start = rsrc->start + offset;
+	*end = rsrc->end + offset;
+}
+
 void __init
 pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
 		  int flags, char *name)
diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c
index 3defc8c33adf..ffe300611f00 100644
--- a/arch/ppc64/kernel/irq.c
+++ b/arch/ppc64/kernel/irq.c
@@ -245,7 +245,7 @@ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
 
 		spin_lock(&desc->lock);
 		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret);
+			note_interrupt(irq, desc, action_ret, regs);
 		if (likely(!(desc->status & IRQ_PENDING)))
 			break;
 		desc->status &= ~IRQ_PENDING;
diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c
index 580676f87d23..ae6f579d3fa0 100644
--- a/arch/ppc64/kernel/pci.c
+++ b/arch/ppc64/kernel/pci.c
@@ -351,7 +351,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 		*offset += hose->pci_mem_offset;
 		res_bit = IORESOURCE_MEM;
 	} else {
-		io_offset = (unsigned long)hose->io_base_virt;
+		io_offset = (unsigned long)hose->io_base_virt - pci_io_base;
 		*offset += io_offset;
 		res_bit = IORESOURCE_IO;
 	}
@@ -378,7 +378,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 
 		/* found it! construct the final physical address */
 		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - io_offset;
+		       	*offset += hose->io_base_phys - io_offset;
 		return rp;
 	}
 
@@ -944,4 +944,22 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 }
 EXPORT_SYMBOL(pci_read_irq_line);
 
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  u64 *start, u64 *end)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned long offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = pci_io_base - (unsigned long)hose->io_base_virt +
+			hose->io_base_phys;
+
+	*start = rsrc->start + offset;
+	*end = rsrc->end + offset;
+}
+
 #endif /* CONFIG_PPC_MULTIPLATFORM */
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 262e13d086fe..7a117ef473c5 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -270,66 +270,10 @@ endmenu
 
 source "drivers/Kconfig"
 
-config PRINTER
-	tristate "Parallel printer support"
-	depends on PARPORT
-	---help---
-	  If you intend to attach a printer to the parallel port of your Linux
-	  box (as opposed to using a serial printer; if the connector at the
-	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
-	  Also read the Printing-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  It is possible to share one parallel port among several devices
-	  (e.g. printer and ZIP drive) and it is safe to compile the
-	  corresponding drivers into the kernel.  If you want to compile this
-	  driver as a module however, choose M here and read
-	  <file:Documentation/parport.txt>.  The module will be called lp.
-
-	  If you have several parallel ports, you can specify which ports to
-	  use with the "lp" kernel command line option.  (Try "man bootparam"
-	  or see the documentation of your boot loader (silo) about how to pass
-	  options to the kernel at boot time.)  The syntax of the "lp" command
-	  line option can be found in <file:drivers/char/lp.c>.
-
-	  If you have more than 8 printers, you need to increase the LP_NO
-	  macro in lp.c and the PARPORT_MAX macro in parport.h.
-
-source "mm/Kconfig"
-
-endmenu
-
-source "drivers/base/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "drivers/mtd/Kconfig"
-
-source "drivers/serial/Kconfig"
-
 if !SUN4
 source "drivers/sbus/char/Kconfig"
 endif
 
-source "drivers/block/Kconfig"
-
-# Don't frighten a common SBus user
-if PCI
-
-source "drivers/ide/Kconfig"
-
-endif
-
-source "drivers/isdn/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/fc4/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "net/Kconfig"
-
 # This one must be before the filesystem configs. -DaveM
 
 menu "Unix98 PTY support"
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index b693c232fd07..657e88aa0902 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -7,25 +7,50 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include "pci.h"
 
 #define MMCONFIG_APER_SIZE (256*1024*1024)
 
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-u32 pci_mmcfg_base_addr;
-
 /* Static virtual mapping of the MMCONFIG aperture */
-char *pci_mmcfg_virt;
+struct mmcfg_virt {
+	struct acpi_table_mcfg_config *cfg;
+	char *virt;
+};
+static struct mmcfg_virt *pci_mmcfg_virt;
 
-static inline char *pci_dev_base(unsigned int bus, unsigned int devfn)
+static char *get_virt(unsigned int seg, int bus)
 {
-	return pci_mmcfg_virt + ((bus << 20) | (devfn << 12));
+	int cfg_num = -1;
+	struct acpi_table_mcfg_config *cfg;
+
+	while (1) {
+		++cfg_num;
+		if (cfg_num >= pci_mmcfg_config_num) {
+			/* something bad is going on, no cfg table is found. */
+			/* so we fall back to the old way we used to do this */
+			/* and just rely on the first entry to be correct. */
+			return pci_mmcfg_virt[0].virt;
+		}
+		cfg = pci_mmcfg_virt[cfg_num].cfg;
+		if (cfg->pci_segment_group_number != seg)
+			continue;
+		if ((cfg->start_bus_number <= bus) &&
+		    (cfg->end_bus_number >= bus))
+			return pci_mmcfg_virt[cfg_num].virt;
+	}
+}
+
+static inline char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
+{
+
+	return get_virt(seg, bus) + ((bus << 20) | (devfn << 12));
 }
 
 static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
-	char *addr = pci_dev_base(bus, devfn); 
+	char *addr = pci_dev_base(seg, bus, devfn);
 
 	if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
@@ -48,7 +73,7 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 			   unsigned int devfn, int reg, int len, u32 value)
 {
-	char *addr = pci_dev_base(bus,devfn);
+	char *addr = pci_dev_base(seg, bus, devfn);
 
 	if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
@@ -75,9 +100,15 @@ static struct pci_raw_ops pci_mmcfg = {
 
 static int __init pci_mmcfg_init(void)
 {
+	int i;
+
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return 0;
-	if (!pci_mmcfg_base_addr)
+
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	if ((pci_mmcfg_config_num == 0) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].base_address == 0))
 		return 0;
 
 	/* Kludge for now. Don't use mmconfig on AMD systems because
@@ -88,13 +119,22 @@ static int __init pci_mmcfg_init(void)
 		return 0; 
 
 	/* RED-PEN i386 doesn't do _nocache right now */
-	pci_mmcfg_virt = ioremap_nocache(pci_mmcfg_base_addr, MMCONFIG_APER_SIZE);
-	if (!pci_mmcfg_virt) { 
-		printk("PCI: Cannot map mmconfig aperture\n");
+	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
+	if (pci_mmcfg_virt == NULL) {
+		printk("PCI: Can not allocate memory for mmconfig structures\n");
 		return 0;
-	}	
+	}
+	for (i = 0; i < pci_mmcfg_config_num; ++i) {
+		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
+		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE);
+		if (!pci_mmcfg_virt[i].virt) {
+			printk("PCI: Cannot map mmconfig aperture for segment %d\n",
+			       pci_mmcfg_config[i].pci_segment_group_number);
+			return 0;
+		}
+		printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
+	}
 
-	printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_base_addr);
 	raw_pci_ops = &pci_mmcfg;
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;