ENGR00225131-01 USB: revert ENGR00221317-02 about set stop_mode_config patch

IC designer had clarified that 1P1 can be turned off if we do not need support
remote wakeup. So If there is no requirement for USB remote wake up, the 1P1
can be turn off. USB driver will support dynamically turn on(off) 1P1 during
system suspend. 1P1 will be turn on depend on USB wakeup is enabled.

This reverts commit c6f69925f9d1f39ccc8c6fcc583122fcf03c105c.

Signed-off-by: make shi <b15407@freescale.com>

4 files changed, 3 insertions, 71 deletions

diff --git a/arch/arm/mach-mx6/pm.c b/arch/arm/mach-mx6/pm.c
index ddce7beca6d3..20139e0b9594 100644
--- a/arch/arm/mach-mx6/pm.c
+++ b/arch/arm/mach-mx6/pm.c
@@ -38,7 +38,6 @@
 #endif
 #include "crm_regs.h"
 #include "src-reg.h"
-#include "regs-anadig.h"
 
 #define SCU_CTRL_OFFSET				0x00
 #define GPC_IMR1_OFFSET				0x08
@@ -123,11 +122,6 @@ static void usb_power_down_handler(void)
 {
 	u32 temp;
 	bool usb_oh3_clk_already_on;
-	if ((__raw_readl(anatop_base + HW_ANADIG_ANA_MISC0)
-		& BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) != 0) {
-			usb_vbus_wakeup_enabled = false;
-			return;
-	}
 	/* enable usb oh3 clock if needed*/
 	temp = __raw_readl(MXC_CCM_CCGR6);
 	usb_oh3_clk_already_on =	\
diff --git a/arch/arm/mach-mx6/usb_dr.c b/arch/arm/mach-mx6/usb_dr.c
index 8fe9700a658f..908af2482c8c 100644
--- a/arch/arm/mach-mx6/usb_dr.c
+++ b/arch/arm/mach-mx6/usb_dr.c
@@ -173,9 +173,6 @@ static int usb_phy_enable(struct fsl_usb2_platform_data *pdata)
 static int usbotg_init_ext(struct platform_device *pdev)
 {
 	struct clk *usb_clk;
-#ifdef CONFIG_USB_EHCI_ARC_OTG
-	void __iomem *anatop_base_addr = MX6_IO_ADDRESS(ANATOP_BASE_ADDR);
-#endif
 	u32 ret;
 
 	/* at mx6q: this clock is AHB clock for usb core */
@@ -201,12 +198,6 @@ static int usbotg_init_ext(struct platform_device *pdev)
 		mdelay(3);
 	}
 	otg_used++;
-#ifdef CONFIG_USB_EHCI_ARC_OTG
-	usb_stop_mode_lock();
-	if (usb_stop_mode_refcount(true) == 1)
-		__raw_writel(BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG, anatop_base_addr + HW_ANADIG_ANA_MISC0_SET);
-	usb_stop_mode_unlock();
-#endif
 
 	return ret;
 }
@@ -214,9 +205,6 @@ static int usbotg_init_ext(struct platform_device *pdev)
 static void usbotg_uninit_ext(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-#ifdef CONFIG_USB_EHCI_ARC_OTG
-	void __iomem *anatop_base_addr = MX6_IO_ADDRESS(ANATOP_BASE_ADDR);
-#endif
 
 	clk_disable(usb_phy1_clk);
 	clk_put(usb_phy1_clk);
@@ -226,12 +214,6 @@ static void usbotg_uninit_ext(struct platform_device *pdev)
 
 	usbotg_uninit(pdata);
 	otg_used--;
-#ifdef CONFIG_USB_EHCI_ARC_OTG
-	usb_stop_mode_lock();
-	 if (usb_stop_mode_refcount(false) == 0)
-		__raw_writel(BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG, anatop_base_addr + HW_ANADIG_ANA_MISC0_CLR);
-	 usb_stop_mode_unlock();
-#endif
 }
 
 static void usbotg_clock_gate(bool on)
diff --git a/arch/arm/mach-mx6/usb_h1.c b/arch/arm/mach-mx6/usb_h1.c
index bece29f7d44b..36aa2aabbe88 100644
--- a/arch/arm/mach-mx6/usb_h1.c
+++ b/arch/arm/mach-mx6/usb_h1.c
@@ -134,7 +134,6 @@ static int fsl_usb_host_init_ext(struct platform_device *pdev)
 {
 	int ret;
 	struct clk *usb_clk;
-	void __iomem *anatop_base_addr = MX6_IO_ADDRESS(ANATOP_BASE_ADDR);
 	usb_clk = clk_get(NULL, "usboh3_clk");
 	clk_enable(usb_clk);
 	usb_oh3_clk = usb_clk;
@@ -146,25 +145,19 @@ static int fsl_usb_host_init_ext(struct platform_device *pdev)
 	}
 	usbh1_internal_phy_clock_gate(true);
 	usb_phy_enable(pdev->dev.platform_data);
-	usb_stop_mode_lock();
-	if (usb_stop_mode_refcount(true) == 1)
-		__raw_writel(BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG, anatop_base_addr + HW_ANADIG_ANA_MISC0_SET);
-	usb_stop_mode_unlock();
+
 	return 0;
 }
 
 static void fsl_usb_host_uninit_ext(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-	void __iomem *anatop_base_addr = MX6_IO_ADDRESS(ANATOP_BASE_ADDR);
+
 	fsl_usb_host_uninit(pdata);
 
 	clk_disable(usb_oh3_clk);
 	clk_put(usb_oh3_clk);
-	usb_stop_mode_lock();
-	if (usb_stop_mode_refcount(false) == 0)
-		__raw_writel(BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG, anatop_base_addr + HW_ANADIG_ANA_MISC0_CLR);
-	usb_stop_mode_unlock();
+
 }
 
 static void usbh1_clock_gate(bool on)
diff --git a/arch/arm/plat-mxc/usb_common.c b/arch/arm/plat-mxc/usb_common.c
index d85d8d663571..97d963a54a54 100755
--- a/arch/arm/plat-mxc/usb_common.c
+++ b/arch/arm/plat-mxc/usb_common.c
@@ -53,9 +53,7 @@ typedef void (*driver_vbus_func)(bool);
 
 void __iomem *imx_otg_base;
 static  driver_vbus_func s_driver_vbus;
-static int stop_mode_refcount;
 
-DEFINE_MUTEX(usb_common_mutex);
 EXPORT_SYMBOL(imx_otg_base);
 
 #define MXC_NUMBER_USB_TRANSCEIVER 6
@@ -73,41 +71,6 @@ bool usb_icbug_swfix_need(void)
 }
 EXPORT_SYMBOL(usb_icbug_swfix_need);
 
-/*
-  * The Mx6 phy sometimes work abnormally after system suspend/resume if the 1V1 is off.
-  * So we should keep the 1V1 active during the system suspend if any USB host enabled.
-  * Set stop_mode_config when any USB host enabled by default, it will impact on system power.
-  * #define DISABLE_STOP_MODE will disable the feature.
-  */
-#ifndef DISABLE_STOP_MODE
-int usb_stop_mode_refcount(bool enable)
-{
-	if (enable)
-		stop_mode_refcount++;
-	else
-		stop_mode_refcount--;
-	return stop_mode_refcount;
-}
-#else
-int usb_stop_mode_refcount(bool enable)
-{
-	return 0;
-}
-#endif
-EXPORT_SYMBOL(usb_stop_mode_refcount);
-
-void usb_stop_mode_lock(void)
-{
-	mutex_lock(&usb_common_mutex);
-}
-EXPORT_SYMBOL(usb_stop_mode_lock);
-
-void usb_stop_mode_unlock(void)
-{
-	mutex_unlock(&usb_common_mutex);
-}
-EXPORT_SYMBOL(usb_stop_mode_unlock);
-
 void mx6_set_host1_vbus_func(driver_vbus_func driver_vbus)
 {
 	s_driver_vbus = driver_vbus;