Merge tag 'mvebu-dt-3.14-2' of git://git.infradead.org/linux-mvebu into next/dt

From Jason Cooper:
mvebu DT changes for v3.14 (set #2)

 - mvebu
    - Netgear ReadyNAS cleanup
    - add Netgear ReadyNAS 2120

 - kirkwood
    - Netgear ReadyNAS cleanup
    - add Netgear ReadyNAS NV+ v2

* tag 'mvebu-dt-3.14-2' of git://git.infradead.org/linux-mvebu:
  ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2
  ARM: mvebu: Add Netgear ReadyNAS 2120 board
  ARM: mvebu: Fix whitespace in NETGEAR ReadyNAS .dts files
  ARM: mvebu: NETGEAR ReadyNAS 104 .dts cleanup
  ARM: mvebu: NETGEAR ReadyNAS 102 .dts cleanup
  ARM: kirkwood: NETGEAR ReadyNAS Duo v2 .dts cleanup

Signed-off-by: Kevin Hilman <khilman@linaro.org>

6 files changed, 699 insertions, 108 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a65b24f..adcc6067eb13 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-mplcec4.dtb \
 	kirkwood-mv88f6281gtw-ge.dtb \
 	kirkwood-netgear_readynas_duo_v2.dtb \
+	kirkwood-netgear_readynas_nv+_v2.dtb \
 	kirkwood-ns2.dtb \
 	kirkwood-ns2lite.dtb \
 	kirkwood-ns2max.dtb \
@@ -114,6 +115,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
+	armada-xp-netgear-rn2120.dtb \
 	armada-xp-matrix.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index df1a1e0e9236..1c2d13d3e597 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
 / {
@@ -62,6 +64,7 @@
 					marvell,pins = "mpp57";
 					marvell,function = "gpio";
 				};
+
 				sata1_led_pin: sata1-led-pin {
 					marvell,pins = "mpp15";
 					marvell,function = "gpio";
@@ -77,6 +80,21 @@
 					marvell,function = "gpio";
 				};
 
+				backup_button_pin: backup-button-pin {
+					marvell,pins = "mpp58";
+					marvell,function = "gpio";
+				};
+
+				power_button_pin: power-button-pin {
+					marvell,pins = "mpp62";
+					marvell,function = "gpio";
+				};
+
+				reset_button_pin: reset-button-pin {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
 				poweroff: poweroff {
 					marvell,pins = "mpp8";
 					marvell,function = "gpio";
@@ -84,7 +102,7 @@
 			};
 
 			mdio {
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
 					reg = <0>;
 				};
 			};
@@ -117,78 +135,76 @@
 	};
 
 	clocks {
-	       #address-cells = <1>;
-	       #size-cells = <0>;
-
-	       g762_clk: fixedclk {
+	       g762_clk: g762-oscillator {
 			 compatible = "fixed-clock";
 			 #clock-cells = <0>;
 			 clock-frequency = <8192>;
 	       };
 	};
 
-	gpio_leds {
+	gpio-leds {
 		compatible = "gpio-leds";
-		pinctrl-0 = < &power_led_pin
-			      &sata1_led_pin
-			      &sata2_led_pin
-			      &backup_led_pin >;
+		pinctrl-0 = <&power_led_pin
+			     &sata1_led_pin
+			     &sata2_led_pin
+			     &backup_led_pin>;
 		pinctrl-names = "default";
 
-		blue_power_led {
+		blue-power-led {
 			label = "rn102:blue:pwr";
-			gpios = <&gpio1 25 1>;  /* GPIO 57 Active Low */
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		green_sata1_led {
+		green-sata1-led {
 			label = "rn102:green:sata1";
-			gpios = <&gpio0 15 1>;  /* GPIO 15 Active Low */
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		green_sata2_led {
+		green-sata2-led {
 			label = "rn102:green:sata2";
-			gpios = <&gpio0 14 1>;   /* GPIO 14 Active Low */
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		green_backup_led {
+		green-backup-led {
 			label = "rn102:green:backup";
-			gpios = <&gpio1 24 1>;   /* GPIO 56 Active Low */
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
+		pinctrl-0 = <&power_button_pin
+			     &reset_button_pin
+			     &backup_button_pin>;
+		pinctrl-names = "default";
 
-		button@1 {
+		power-button {
 			label = "Power Button";
-			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 0>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@2 {
+		reset-button {
 			label = "Reset Button";
-			linux,code = <0x198>;   /* KEY_RESTART */
-			gpios = <&gpio0 6 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 		};
 
-		button@3 {
+		backup-button {
 			label = "Backup Button";
-			linux,code = <133>;     /* KEY_COPY */
-			gpios = <&gpio1 26 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio_poweroff {
+	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&poweroff>;
 		pinctrl-names = "default";
-		gpios = <&gpio0 8 1>;
+		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 	};
-
 };
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 50b51509c330..e48e5fb6a065 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -11,8 +11,9 @@
 
 /dts-v1/;
 
-#include "armada-370.dtsi"
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
 
 / {
 	model = "NETGEAR ReadyNAS 104";
@@ -59,12 +60,12 @@
 					marvell,function = "gpio";
 				};
 
-				backup_key_pin: backup-key-pin {
+				backup_button_pin: backup-button-pin {
 					marvell,pins = "mpp52";
 					marvell,function = "gpio";
 				};
 
-				power_key_pin: power-key-pin {
+				power_button_pin: power-button-pin {
 					marvell,pins = "mpp62";
 					marvell,function = "gpio";
 				};
@@ -79,18 +80,18 @@
 					marvell,function = "gpio";
 				};
 
-				reset_key_pin: reset-key-pin {
+				reset_button_pin: reset-button-pin {
 					marvell,pins = "mpp65";
 					marvell,function = "gpio";
 				};
 			};
 
 			mdio {
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
 					reg = <0>;
 				};
 
-				phy1: ethernet-phy@1 {
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
 					reg = <1>;
 				};
 			};
@@ -136,90 +137,85 @@
 	};
 
 	clocks {
-	       #address-cells = <1>;
-	       #size-cells = <0>;
-
-	       g762_clk: fixedclk {
+	       g762_clk: g762-oscillator {
 			 compatible = "fixed-clock";
 			 #clock-cells = <0>;
 			 clock-frequency = <8192>;
 	       };
 	};
 
-	gpio_leds {
+	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&backup_led_pin &power_led_pin>;
 		pinctrl-names = "default";
 
-		blue_backup_led {
+		blue-backup-led {
 			label = "rn104:blue:backup";
-			gpios = <&gpio1 31 0>;   /* GPIO 63 Active High */
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		blue_power_led {
+		blue-power-led {
 			label = "rn104:blue:pwr";
-			gpios = <&gpio2 0 1>;    /* GPIO 64 Active Low */
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "keep";
 		};
 
-		sata1_led {
+		blue-sata1-led {
 			label = "rn104:blue:sata1";
 			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		sata2_led {
+		blue-sata2-led {
 			label = "rn104:blue:sata2";
 			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		sata3_led {
+		blue-sata3-led {
 			label = "rn104:blue:sata3";
 			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		sata4_led {
+		blue-sata4-led {
 			label = "rn104:blue:sata4";
 			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&backup_key_pin
-			     &power_key_pin
-			     &reset_key_pin>;
+		pinctrl-0 = <&backup_button_pin
+			     &power_button_pin
+			     &reset_button_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		backup-button {
 			label = "Backup Button";
-			linux,code = <133>;     /* KEY_COPY */
-			gpios = <&gpio1 20 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		power-button {
 			label = "Power Button";
-			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 0>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@3 {
+		reset-button {
 			label = "Reset Button";
-			linux,code = <0x198>;   /* KEY_RESTART */
-			gpios = <&gpio2 1 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio_poweroff {
+	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&poweroff>;
 		pinctrl-names = "default";
-		gpios = <&gpio1 28 1>;
+		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
new file mode 100644
index 000000000000..8b2a7875764f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -0,0 +1,286 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 2120";
+	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to first Marvell 88SE9170 SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to second Marvell 88SE9170 SATA controller */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			pinctrl {
+				poweroff: poweroff {
+					marvell,pins = "mpp42";
+					marvell,function = "gpio";
+				};
+
+				power_button_pin: power-button-pin {
+					marvell,pins = "mpp27";
+					marvell,function = "gpio";
+				};
+
+				reset_button_pin: reset-button-pin {
+					marvell,pins = "mpp41";
+					marvell,function = "gpio";
+				};
+
+				sata1_led_pin: sata1-led-pin {
+					marvell,pins = "mpp31";
+					marvell,function = "gpio";
+				};
+
+				sata2_led_pin: sata2-led-pin {
+					marvell,pins = "mpp40";
+					marvell,function = "gpio";
+				};
+
+				sata3_led_pin: sata3-led-pin {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+
+				sata4_led_pin: sata4-led-pin {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				sata1_power_pin: sata1-power-pin {
+					marvell,pins = "mpp24";
+					marvell,function = "gpio";
+				};
+
+				sata2_power_pin: sata2-power-pin {
+					marvell,pins = "mpp25";
+					marvell,function = "gpio";
+				};
+
+				sata3_power_pin: sata3-power-pin {
+					marvell,pins = "mpp26";
+					marvell,function = "gpio";
+				};
+
+				sata4_power_pin: sata4-power-pin {
+					marvell,pins = "mpp28";
+					marvell,function = "gpio";
+				};
+
+				sata1_pres_pin: sata1-pres-pin {
+					marvell,pins = "mpp32";
+					marvell,function = "gpio";
+				};
+
+				sata2_pres_pin: sata2-pres-pin {
+					marvell,pins = "mpp33";
+					marvell,function = "gpio";
+				};
+
+				sata3_pres_pin: sata3-pres-pin {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				sata4_pres_pin: sata4-pres-pin {
+					marvell,pins = "mpp35";
+					marvell,function = "gpio";
+				};
+
+				err_led_pin: err-led-pin {
+					marvell,pins = "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial@12000 {
+				clocks = <&coreclk 0>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Controller for rear fan #1 of 3 (Protechnic
+				 * MGT4012XB-O20, 8000RPM) near eSATA port */
+				g762_fan1: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear (center) fan #2 of 3 */
+				g762_fan2: g762@48 {
+					compatible = "gmt,g762";
+					reg = <0x48>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear fan #3 of 3 */
+				g762_fan3: g762@49 {
+					compatible = "gmt,g762";
+					reg = <0x49>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/* Temperature sensor */
+				g751: g751@4c {
+					compatible = "gmt,g751";
+					reg = <0x4c>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+			     &sata3_led_pin &sata4_led_pin>;
+		pinctrl-names = "default";
+
+		red-sata1-led {
+			label = "rn2120:red:sata1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata2-led {
+			label = "rn2120:red:sata2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata3-led {
+			label = "rn2120:red:sata3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata4-led {
+			label = "rn2120:red:sata4";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-err-led {
+			label = "rn2120:red:err";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index 362770229c1b..3b1a365c9a8e 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -1,5 +1,17 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS Duo v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "kirkwood.dtsi"
 #include "kirkwood-6282.dtsi"
@@ -33,34 +45,42 @@
 				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
+
 			pmx_button_backup: pmx-button-backup {
 				marvell,pins = "mpp45";
 				marvell,function = "gpio";
 			};
+
 			pmx_button_reset: pmx-button-reset {
 				marvell,pins = "mpp13";
 				marvell,function = "gpio";
 			};
+
 			pmx_led_blue_power: pmx-led-blue-power {
 				marvell,pins = "mpp31";
 				marvell,function = "gpio";
 			};
+
 			pmx_led_blue_activity: pmx-led-blue-activity {
 				marvell,pins = "mpp38";
 				marvell,function = "gpio";
 			};
+
 			pmx_led_blue_disk1: pmx-led-blue-disk1 {
 				marvell,pins = "mpp23";
 				marvell,function = "gpio";
 			};
+
 			pmx_led_blue_disk2: pmx-led-blue-disk2 {
 				marvell,pins = "mpp22";
 				marvell,function = "gpio";
 			};
+
 			pmx_led_blue_backup: pmx-led-blue-backup {
 				marvell,pins = "mpp29";
 				marvell,function = "gpio";
 			};
+
 			pmx_poweroff: pmx-poweroff {
 				marvell,pins = "mpp30";
 				marvell,function = "gpio";
@@ -68,10 +88,7 @@
 		};
 
 		clocks {
-		       #address-cells = <1>;
-		       #size-cells = <0>;
-
-		       g762_clk: fixedclk {
+		       g762_clk: g762-oscillator {
 				 compatible = "fixed-clock";
 				 #clock-cells = <0>;
 				 clock-frequency = <8192>;
@@ -117,49 +134,53 @@
 
 		power_led {
 			label = "status:blue:power_led";
-			gpios = <&gpio0 31 1>;   /* GPIO 31 Active Low */
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
+
 		activity_led {
 			label = "status:blue:activity_led";
-			gpios = <&gpio1 6 1>;    /* GPIO 38 Active Low */
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
+
 		disk1_led {
 			label = "status:blue:disk1_led";
-			gpios = <&gpio0 23 1>;   /* GPIO 23 Active Low */
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
+
 		disk2_led {
 			label = "status:blue:disk2_led";
-			gpios = <&gpio0 22 1>;   /* GPIO 22 Active Low */
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
+
 		backup_led {
 			label = "status:blue:backup_led";
-			gpios = <&gpio0 29 1>;   /* GPIO 29 Active Low*/
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power &pmx_button_backup
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		button@1 {
+		power-button {
 			label = "Power Button";
-			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 15 1>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+
+		reset-button {
 			label = "Reset Button";
-			linux,code = <0x198>;   /* KEY_RESTART */
-			gpios = <&gpio0 13 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+
+		backup-button {
 			label = "Backup Button";
-			linux,code = <133>;     /* KEY_COPY */
-			gpios = <&gpio1 13 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -170,23 +191,23 @@
 		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 	};
 
-        regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                usb_power: regulator@1 {
-                        compatible = "regulator-fixed";
-                        reg = <1>;
-                        regulator-name = "USB 3.0 Power";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio1 14 0>;
-                };
-        };
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &nand {
@@ -222,7 +243,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
 		device_type = "ethernet-phy";
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
new file mode 100644
index 000000000000..72a3883f6a04
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -0,0 +1,270 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS NV+ v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS NV+ v2";
+	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to NEC uPD720200 USB 3.0 controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk3: pmx-led-blue-disk3 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk4: pmx-led-blue-disk4 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+		       g762_clk: g762-oscillator {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk3_led {
+			label = "status:blue:disk3_led";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		disk4_led {
+			label = "status:blue:disk4_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};