summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorJohn Stultz <john.stultz@linaro.org>2018-05-25 20:10:47 -0700
committerWei Xu <xuwei04@gmail.com>2018-05-26 17:51:47 +0100
commit9c6d26df1fae6ad4718d51c48e6517913304ed27 (patch)
tree6aed37321c1c44d7c95d3feaa22baa627241da06 /arch
parent60cc43fc888428bb2f18f08997432d426a243338 (diff)
arm64: dts: hikey: Fix eMMC corruption regression
This patch is a partial revert of commit abd7d0972a19 ("arm64: dts: hikey: Enable HS200 mode on eMMC") which has been causing eMMC corruption on my HiKey board. Symptoms usually looked like: mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) ... mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc0: new HS200 MMC card at address 0001 ... dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3 mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) print_req_error: I/O error, dev mmcblk0, sector 8810504 Aborting journal on device mmcblk0p10-8. mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal EXT4-fs (mmcblk0p10): Remounting filesystem read-only And quite often this would result in a disk that wouldn't properly boot even with older kernels. It seems the max-frequency property added by the above patch is causing the problem, so remove it. Cc: Ryan Grachek <ryan@edited.us> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei04@gmail.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts1
1 files changed, 0 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 724a0d3b7683..edb4ee0b8896 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -299,7 +299,6 @@
/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
dwmmc_0: dwmmc0@f723d000 {
- max-frequency = <150000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;