Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6

30 files changed, 2331 insertions, 1418 deletions

diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 0b07922a2ac6..874a283edb95 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,10 +47,10 @@ config PM
 
 config ISA_DMA_API
 	bool
-	default y
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
+	depends on BROKEN
 	default y
 
 source "init/Kconfig"
@@ -154,13 +154,14 @@ config HOTPLUG_CPU
 
 config ARCH_DISCONTIGMEM_ENABLE
 	bool "Discontiguous memory support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on 64BIT && EXPERIMENTAL
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
 	  for architectures which are either NUMA (Non-Uniform Memory Access)
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+source "kernel/Kconfig.hz"
 source "mm/Kconfig"
 
 config PREEMPT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 3b339b1cce13..9b7e42490dd1 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -20,7 +20,8 @@ NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
 
 ifdef CONFIG_64BIT
-CROSS_COMPILE	:= hppa64-linux-
+CROSS_COMPILE	:= $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
+			echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
 UTS_MACHINE	:= parisc64
 CHECKFLAGS	+= -D__LP64__=1 -m64
 else
@@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align
 
 OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
 
+GCC_VERSION     := $(call cc-version)
+ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),)
+$(error Sorry, couldn't find ($(cc-version)).)
+endif
+ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),)
+$(error Sorry, your compiler is too old ($(GCC_VERSION)).  GCC v3.3 or above is required.)
+endif
+
 cflags-y	:= -pipe
 
 # These flags should be implied by an hppa-linux configuration, but they
@@ -43,7 +52,7 @@ cflags-y	+= -mno-space-regs -mfast-indirect-calls
 # Currently we save and restore fpregs on all kernel entry/interruption paths.
 # If that gets optimized, we might need to disable the use of fpregs in the
 # kernel.
-#cflags-y	+= -mdisable-fpregs
+cflags-y	+= -mdisable-fpregs
 
 # Without this, "ld -r" results in .text sections that are too big
 # (> 0x40000) for branches to reach stubs.
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 6efaa9293eef..3e013f55df64 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,12 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:20:32 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:34 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -65,9 +74,18 @@ CONFIG_PA7100LC=y
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y
 # CONFIG_GSC_WAX is not set
 # CONFIG_EISA is not set
 # CONFIG_PCI is not set
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# PCI Hotplug Support
 #
 
 #
-# PCI Hotplug Support
+# PA-RISC specific drivers
 #
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_ZALON is not set
-CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -243,12 +132,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -262,8 +153,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -279,11 +173,14 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 # CONFIG_IP_NF_CT_ACCT is not set
 CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m
 # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 # CONFIG_IP_NF_MATCH_REALM is not set
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
 CONFIG_IP_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
@@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -362,10 +263,6 @@ CONFIG_LLC2=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -373,17 +270,162 @@ CONFIG_LLC2=m
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+CONFIG_SCSI_LASI700=y
+CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_ZALON is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -391,6 +433,7 @@ CONFIG_TUN=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_LASI_82596=y
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y
 #
 # CONFIG_STRIP is not set
 # CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Wan interfaces
@@ -431,6 +475,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -460,19 +506,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
 # CONFIG_KEYBOARD_HIL is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
@@ -494,6 +528,19 @@ CONFIG_MOUSE_HIL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -546,12 +592,14 @@ CONFIG_GEN_RTC_X=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -562,10 +610,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=128
 CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
 # CONFIG_FONT_MINI_4x6 is not set
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 
 #
 # Logo configuration
@@ -610,6 +676,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -657,10 +724,6 @@ CONFIG_SND_HARMONY=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -671,10 +734,20 @@ CONFIG_SND_HARMONY=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
@@ -682,20 +755,24 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 CONFIG_JFS_FS=m
 # CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -754,16 +828,19 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -778,6 +855,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -838,13 +916,19 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -882,9 +967,14 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 30fc03ed0cfb..955ef5084f3e 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc4-pa1
-# Wed Feb 16 11:32:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:54 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -74,7 +82,19 @@ CONFIG_PREFETCH=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 CONFIG_COMPAT=y
 CONFIG_NR_CPUS=8
@@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
@@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -104,7 +126,6 @@ CONFIG_CARDBUS=y
 CONFIG_YENTA=m
 CONFIG_PD6729=m
 CONFIG_I82092=m
-CONFIG_TCIC=m
 CONFIG_PCCARD_NONSTATIC=m
 
 #
@@ -127,6 +148,203 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -139,6 +357,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
@@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 CONFIG_SCSI_QLOGIC_FC=m
 # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
@@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA22XX is not set
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
@@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
 #
@@ -303,153 +529,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
+# Network device support
 #
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -457,12 +543,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=m
 CONFIG_TYPHOON=m
@@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 CONFIG_PCMCIA_XIRCOM=m
 # CONFIG_PCMCIA_XIRTULIP is not set
 CONFIG_HP100=m
@@ -489,48 +582,43 @@ CONFIG_PCNET32=m
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
+# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
-CONFIG_E100_NAPI=y
 # CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
-CONFIG_EPIC100=m
+# CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE is not set
 
 #
 # Ethernet (1000 Mbit)
 #
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
+# CONFIG_DL2K is not set
 CONFIG_E1000=m
 CONFIG_E1000_NAPI=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
-CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
-# CONFIG_2BUFF_MODE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
@@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m
 CONFIG_HERMES=m
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
+# CONFIG_NORTEL_HERMES is not set
 CONFIG_PCI_HERMES=m
 # CONFIG_ATMEL is not set
 
@@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m
 # Wireless 802.11b Pcmcia/Cardbus cards support
 #
 CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 CONFIG_AIRO_CS=m
 CONFIG_PCMCIA_WL3501=m
 
@@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -633,13 +726,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -649,6 +735,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_PDC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 
@@ -708,6 +800,11 @@ CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -718,10 +815,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
+# CONFIG_STI_CONSOLE is not set
 
 #
 # Sound
@@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # InfiniBand support
 #
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
@@ -794,22 +899,20 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -867,15 +968,18 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -890,6 +994,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
+# CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
 # CONFIG_NLS_CODEPAGE_860 is not set
 # CONFIG_NLS_CODEPAGE_861 is not set
 # CONFIG_NLS_CODEPAGE_862 is not set
-CONFIG_NLS_CODEPAGE_863=m
+# CONFIG_NLS_CODEPAGE_863 is not set
 # CONFIG_NLS_CODEPAGE_864 is not set
-CONFIG_NLS_CODEPAGE_865=m
+# CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
 # CONFIG_NLS_CODEPAGE_936 is not set
@@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
 # CONFIG_NLS_ISO8859_5 is not set
 # CONFIG_NLS_ISO8859_6 is not set
 # CONFIG_NLS_ISO8859_7 is not set
@@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_IOREMAP is not set
@@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
@@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 46c9511f3229..8819e7e6ae3f 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,12 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:35:54 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:10 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_EXPERIMENTAL is not set
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -60,8 +69,14 @@ CONFIG_PA7100LC=y
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y
 CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 # CONFIG_PCI_LBA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# PA-RISC specific drivers
+#
 CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -91,6 +120,64 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -99,9 +186,15 @@ CONFIG_BINFMT_ELF=y
 #
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -111,10 +204,8 @@ CONFIG_STANDALONE=y
 #
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_SERIAL is not set
 CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=y
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
 # CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
@@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_NCR53C406A is not set
 CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
 CONFIG_53C700_LE_ON_BE=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -347,6 +388,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_LASI_82596 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
@@ -369,6 +415,7 @@ CONFIG_TULIP=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
@@ -384,12 +431,15 @@ CONFIG_TULIP=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-# CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 
 #
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -435,6 +485,8 @@ CONFIG_PPP=y
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -464,23 +516,12 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-# CONFIG_HP_SDC is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
+# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_HIL_OLD is not set
 # CONFIG_KEYBOARD_HIL is not set
 CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
@@ -502,6 +543,19 @@ CONFIG_INPUT_MISC=y
 # CONFIG_HP_SDC_RTC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+# CONFIG_HP_SDC is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
 
 #
 # Non-8250 serial port support
@@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_PDC_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -555,11 +613,14 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -570,10 +631,20 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -595,6 +671,7 @@ CONFIG_FB=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -606,18 +683,19 @@ CONFIG_FB_STI=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -658,23 +733,36 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -697,11 +785,10 @@ CONFIG_JOLIET=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -719,15 +806,19 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -815,6 +912,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -832,8 +930,13 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 67aca6ccc9b0..9d86b6b1ebd1 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,12 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:26:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:31 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -66,10 +76,19 @@ CONFIG_KMOD=y
 CONFIG_PA8X00=y
 CONFIG_PA20=y
 CONFIG_PREFETCH=y
-# CONFIG_PARISC64 is not set
 # CONFIG_64BIT is not set
 # CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -79,13 +98,10 @@ CONFIG_PREFETCH=y
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -93,13 +109,17 @@ CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# PCI Hotplug Support
 #
+# CONFIG_HOTPLUG_PCI is not set
 
 #
-# PCI Hotplug Support
+# PA-RISC specific drivers
 #
-# CONFIG_HOTPLUG_PCI is not set
+CONFIG_SUPERIO=y
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -108,6 +128,186 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_DEBUG=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+CONFIG_IP6_NF_MATCH_OWNER=m
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -120,6 +320,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 CONFIG_BLK_DEV_NS87415=y
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=m
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 CONFIG_SCSI_SATA_SIL=m
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 CONFIG_SCSI_SATA_VIA=m
 # CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA21XX is not set
 # CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA6322=m
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 # CONFIG_MD_RAID5 is not set
 # CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=y
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
 
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
 #
@@ -342,151 +556,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_DEBUG=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -494,12 +570,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
+# CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
+# CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-# CONFIG_EEPRO100_PIO is not set
+# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -554,15 +630,18 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-CONFIG_IXGB=y
-CONFIG_IXGB_NAPI=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
 #
@@ -593,6 +672,8 @@ CONFIG_PPPOE=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -622,16 +703,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -649,6 +720,16 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_PDC_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -698,12 +779,16 @@ CONFIG_GEN_RTC_X=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -714,10 +799,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -739,6 +839,7 @@ CONFIG_FB=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -751,18 +852,20 @@ CONFIG_FB_STI=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -775,6 +878,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -784,7 +888,78 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
 
 #
 # Open Sound System
@@ -794,6 +969,8 @@ CONFIG_SOUND=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
 
@@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -846,21 +1022,25 @@ CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_HPUSBSCSI=m
 
 #
 # USB Multimedia devices
@@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
@@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -920,27 +1102,41 @@ CONFIG_USB_LEGOTOWER=m
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -996,16 +1190,19 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_HMAC is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 # CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
@@ -1117,9 +1322,14 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index fdae21c503d7..f38a4620d24f 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,38 +1,56 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:01:33 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_AUDIT is not set
 # CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y
 CONFIG_PA7000=y
 # CONFIG_PA7100LC is not set
 # CONFIG_PA7200 is not set
+# CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y
 # CONFIG_ISA is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PA-RISC specific drivers
+#
 CONFIG_SUPERIO=y
 CONFIG_CHASSIS_LCD_LED=y
 CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -81,15 +125,97 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y
 #
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
 CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 # CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
 #
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
 CONFIG_53C700_LE_ON_BE=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_ZALON=y
 CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
 CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID5=y
 # CONFIG_MD_RAID6 is not set
 # CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
 
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y
 # CONFIG_I2O is not set
 
 #
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
 CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
 # ARCnet devices
 #
 # CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_LASI_82596=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 
@@ -336,6 +430,7 @@ CONFIG_TULIP=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -361,30 +456,37 @@ CONFIG_NET_PCI=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-CONFIG_DL2K=y
+CONFIG_ACENIC=y
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-CONFIG_AIRO=y
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
 
 #
-# Token Ring devices
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -460,51 +554,67 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_HIL is not set
 CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
 # CONFIG_JOYSTICK_IFORCE is not set
 # CONFIG_JOYSTICK_WARRIOR is not set
 # CONFIG_JOYSTICK_MAGELLAN is not set
 # CONFIG_JOYSTICK_SPACEORB is not set
 # CONFIG_JOYSTICK_SPACEBALL is not set
 # CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDDLER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
 # CONFIG_JOYSTICK_DB9 is not set
 # CONFIG_JOYSTICK_GAMECON is not set
 # CONFIG_JOYSTICK_TURBOGRAFX is not set
-# CONFIG_INPUT_JOYDUMP is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_HP_SDC_RTC=y
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_MUX is not set
-# CONFIG_PDC_CONSOLE is not set
+CONFIG_SERIAL_MUX=y
+CONFIG_SERIAL_MUX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -541,12 +651,6 @@ CONFIG_PRINTER=y
 # CONFIG_TIPAR is not set
 
 #
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
@@ -555,7 +659,6 @@ CONFIG_PRINTER=y
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -565,21 +668,40 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
 
 #
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -638,17 +772,94 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# GSC devices
+#
+CONFIG_SND_HARMONY=y
 
 #
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
-# CONFIG_SOUND_HARMONY is not set
 
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
 # CONFIG_USB_STORAGE is not set
 
 #
-# USB Human Interface Devices (HID)
+# USB Input Devices
 #
 # CONFIG_USB_HID is not set
 
@@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
@@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y
 #
 
 #
-# USB Network adaptors
+# USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -732,12 +962,21 @@ CONFIG_USB_OHCI_HCD=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -745,22 +984,41 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_GADGET is not set
 
 #
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -773,7 +1031,8 @@ CONFIG_JOLIET=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -781,11 +1040,11 @@ CONFIG_JOLIET=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -809,23 +1068,28 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_RWLOCK is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
@@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_AES is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f46a07a79218..e15f09eaed12 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -27,6 +27,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
+#include <asm/sections.h>
 
 int split_tlb;
 int dcache_stride;
@@ -207,6 +208,9 @@ parisc_cache_init(void)
 
 	/* "New and Improved" version from Jim Hull 
 	 *	(1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift))
+	 * The following CAFL_STRIDE is an optimized version, see
+	 * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html
+	 * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html
 	 */
 #define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift))
 	dcache_stride = CAFL_STRIDE(cache_info.dc_conf);
@@ -339,17 +343,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD;
 void parisc_setup_cache_timing(void)
 {
 	unsigned long rangetime, alltime;
-	extern char _text;	/* start of kernel code, defined by linker */
-	extern char _end;	/* end of BSS, defined by linker */
 	unsigned long size;
 
 	alltime = mfctl(16);
 	flush_data_cache();
 	alltime = mfctl(16) - alltime;
 
-	size = (unsigned long)(&_end - _text);
+	size = (unsigned long)(_end - _text);
 	rangetime = mfctl(16);
-	flush_kernel_dcache_range((unsigned long)&_text, size);
+	flush_kernel_dcache_range((unsigned long)_text, size);
 	rangetime = mfctl(16) - rangetime;
 
 	printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d34bbe7ae0e3..988844a169e6 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -46,36 +46,51 @@ static struct device root = {
 	.bus_id = "parisc",
 };
 
-#define for_each_padev(padev) \
-	for (padev = next_dev(&root); padev != NULL; \
-			padev = next_dev(&padev->dev))
+static inline int check_dev(struct device *dev)
+{
+	if (dev->bus == &parisc_bus_type) {
+		struct parisc_device *pdev;
+		pdev = to_parisc_device(dev);
+		return pdev->id.hw_type != HPHW_FAULTY;
+	}
+	return 1;
+}
+
+static struct device *
+parse_tree_node(struct device *parent, int index, struct hardware_path *modpath);
 
-#define check_dev(padev) \
-	(padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev)
+struct recurse_struct {
+	void * obj;
+	int (*fn)(struct device *, void *);
+};
+
+static int descend_children(struct device * dev, void * data)
+{
+	struct recurse_struct * recurse_data = (struct recurse_struct *)data;
+
+	if (recurse_data->fn(dev, recurse_data->obj))
+		return 1;
+	else
+		return device_for_each_child(dev, recurse_data, descend_children);
+}
 
 /**
- * next_dev - enumerates registered devices
- * @dev: the previous device returned from next_dev
+ *	for_each_padev - Iterate over all devices in the tree
+ *	@fn:	Function to call for each device.
+ *	@data:	Data to pass to the called function.
  *
- * next_dev does a depth-first search of the tree, returning parents
- * before children.  Returns NULL when there are no more devices.
+ *	This performs a depth-first traversal of the tree, calling the
+ *	function passed for each node.  It calls the function for parents
+ *	before children.
  */
-static struct parisc_device *next_dev(struct device *dev)
-{
-	if (!list_empty(&dev->children)) {
-		dev = list_to_dev(dev->children.next);
-		return check_dev(to_parisc_device(dev));
-	}
 
-	while (dev != &root) {
-		if (dev->node.next != &dev->parent->children) {
-			dev = list_to_dev(dev->node.next);
-			return to_parisc_device(dev);
-		}
-		dev = dev->parent;
-	}
-
-	return NULL;
+static int for_each_padev(int (*fn)(struct device *, void *), void * data)
+{
+	struct recurse_struct recurse_data = {
+		.obj	= data,
+		.fn	= fn,
+	};
+	return device_for_each_child(&root, &recurse_data, descend_children);
 }
 
 /**
@@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev)
 	return 0;
 }
 
-static void claim_device(struct parisc_driver *driver, struct parisc_device *dev)
-{
-	dev->driver = driver;
-	request_mem_region(dev->hpa, 0x1000, driver->name);
-}
-
 static int parisc_driver_probe(struct device *dev)
 {
 	int rc;
@@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev)
 
 	rc = pa_drv->probe(pa_dev);
 
-	if(!rc)
-		claim_device(pa_drv, pa_dev);
+	if (!rc)
+		pa_dev->driver = pa_drv;
 
 	return rc;
 }
@@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev)
 	struct parisc_driver *pa_drv = to_parisc_driver(dev->driver);
 	if (pa_drv->remove)
 		pa_drv->remove(pa_dev);
-	release_mem_region(pa_dev->hpa, 0x1000);
 
 	return 0;
 }
@@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver)
 }
 EXPORT_SYMBOL(register_parisc_driver);
 
+
+struct match_count {
+	struct parisc_driver * driver;
+	int count;
+};
+
+static int match_and_count(struct device * dev, void * data)
+{
+	struct match_count * m = data;
+	struct parisc_device * pdev = to_parisc_device(dev);
+
+	if (check_dev(dev)) {
+		if (match_device(m->driver, pdev))
+			m->count++;
+	}
+	return 0;
+}
+
 /**
  * count_parisc_driver - count # of devices this driver would match
  * @driver: the PA-RISC driver to try
@@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver);
  */
 int count_parisc_driver(struct parisc_driver *driver)
 {
-	struct parisc_device *device;
-	int cnt = 0;
+	struct match_count m = {
+		.driver	= driver,
+		.count	= 0,
+	};
 
-	for_each_padev(device) {
-		if (match_device(driver, device))
-			cnt++;
-	}
+	for_each_padev(match_and_count, &m);
 
-	return cnt;
+	return m.count;
 }
 
 
@@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver)
 }
 EXPORT_SYMBOL(unregister_parisc_driver);
 
-static struct parisc_device *find_device_by_addr(unsigned long hpa)
+struct find_data {
+	unsigned long hpa;
+	struct parisc_device * dev;
+};
+
+static int find_device(struct device * dev, void * data)
 {
-	struct parisc_device *dev;
-	for_each_padev(dev) {
-		if (dev->hpa == hpa)
-			return dev;
+	struct parisc_device * pdev = to_parisc_device(dev);
+	struct find_data * d = (struct find_data*)data;
+
+	if (check_dev(dev)) {
+		if (pdev->hpa.start == d->hpa) {
+			d->dev = pdev;
+			return 1;
+		}
 	}
-	return NULL;
+	return 0;
+}
+
+static struct parisc_device *find_device_by_addr(unsigned long hpa)
+{
+	struct find_data d = {
+		.hpa	= hpa,
+	};
+	int ret;
+
+	ret = for_each_padev(find_device, &d);
+	return ret ? d.dev : NULL;
 }
 
 /**
@@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
 	return dev;
 }
 
+struct match_id_data {
+	char id;
+	struct parisc_device * dev;
+};
+
+static int match_by_id(struct device * dev, void * data)
+{
+	struct parisc_device * pdev = to_parisc_device(dev);
+	struct match_id_data * d = data;
+
+	if (pdev->hw_path == d->id) {
+		d->dev = pdev;
+		return 1;
+	}
+	return 0;
+}
+
 /**
  * alloc_tree_node - returns a device entry in the iotree
  * @parent: the parent node in the tree
@@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
  */
 static struct parisc_device * alloc_tree_node(struct device *parent, char id)
 {
-	struct device *dev;
-
-	list_for_each_entry(dev, &parent->children, node) {
-		struct parisc_device *padev = to_parisc_device(dev);
-		if (padev->hw_path == id)
-			return padev;
-	}
-
-	return create_tree_node(id, parent);
+	struct match_id_data d = {
+		.id = id,
+	};
+	if (device_for_each_child(parent, &d, match_by_id))
+		return d.dev;
+	else
+		return create_tree_node(id, parent);
 }
 
 static struct parisc_device *create_parisc_device(struct hardware_path *modpath)
@@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 
 	dev = create_parisc_device(mod_path);
 	if (dev->id.hw_type != HPHW_FAULTY) {
-		char p[64];
-		print_pa_hwpath(dev, p);
 		printk("Two devices have hardware path %s.  Please file a bug with HP.\n"
-			"In the meantime, you could try rearranging your cards.\n", p);
+			"In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev));
 		return NULL;
 	}
 
@@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 	dev->id.hversion_rev = iodc_data[1] & 0x0f;
 	dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
 			(iodc_data[5] << 8) | iodc_data[6];
-	dev->hpa = hpa;
+	dev->hpa.name = parisc_pathname(dev);
+	dev->hpa.start = hpa;
+	if (hpa == 0xf4000000 || hpa == 0xf6000000 ||
+	    hpa == 0xf8000000 || hpa == 0xfa000000) {
+		dev->hpa.end = hpa + 0x01ffffff;
+	} else {
+		dev->hpa.end = hpa + 0xfff;
+	}
+	dev->hpa.flags = IORESOURCE_MEM;
 	name = parisc_hardware_description(&dev->id);
 	if (name) {
 		strlcpy(dev->name, name, sizeof(dev->name));
 	}
 
+	/* Silently fail things like mouse ports which are subsumed within
+	 * the keyboard controller
+	 */
+	if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
+		printk("Unable to claim HPA %lx for device %s\n",
+				hpa, name);
+
 	return dev;
 }
 
@@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index,
 	return (curr->hw_path == id);
 }
 
+struct parse_tree_data {
+	int index;
+	struct hardware_path * modpath;
+	struct device * dev;
+};
+
+static int check_parent(struct device * dev, void * data)
+{
+	struct parse_tree_data * d = data;
+
+	if (check_dev(dev)) {
+		if (dev->bus == &parisc_bus_type) {
+			if (match_parisc_device(dev, d->index, d->modpath))
+				d->dev = dev;
+		} else if (is_pci_dev(dev)) {
+			if (match_pci_device(dev, d->index, d->modpath))
+				d->dev = dev;
+		} else if (dev->bus == NULL) {
+			/* we are on a bus bridge */
+			struct device *new = parse_tree_node(dev, d->index, d->modpath);
+			if (new)
+				d->dev = new;
+		}
+	}
+	return d->dev != NULL;
+}
+
 /**
  * parse_tree_node - returns a device entry in the iotree
  * @parent: the parent node in the tree
@@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index,
 static struct device *
 parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
 {
-	struct device *device;
-	 
-	list_for_each_entry(device, &parent->children, node) {
-		if (device->bus == &parisc_bus_type) {
-			if (match_parisc_device(device, index, modpath))
-				return device;
-		} else if (is_pci_dev(device)) {
-			if (match_pci_device(device, index, modpath))
-				return device;
-		} else if (device->bus == NULL) {
-			/* we are on a bus bridge */
-			struct device *new = parse_tree_node(device, index, modpath);
-			if (new)
-				return new;
-		}
-	}
+	struct parse_tree_data d = {
+		.index          = index,
+		.modpath        = modpath,
+	};
 
-	return NULL;
+	struct recurse_struct recurse_data = {
+		.obj	= &d,
+		.fn	= check_parent,
+	};
+
+	device_for_each_child(parent, &recurse_data, descend_children);
+	return d.dev;
 }
 
 /**
@@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath);
         ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT))
 
 #define IS_LOWER_PORT(dev) \
-        ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \
+        ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \
                 & BC_PORT_MASK) == BC_LOWER_PORT)
 
 #define MAX_NATIVE_DEVICES 64
@@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath);
 #define FLEX_MASK 	F_EXTEND(0xfffc0000)
 #define IO_IO_LOW	offsetof(struct bc_module, io_io_low)
 #define IO_IO_HIGH	offsetof(struct bc_module, io_io_high)
-#define READ_IO_IO_LOW(dev)  (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW)
-#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH)
+#define READ_IO_IO_LOW(dev)  (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW)
+#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH)
 
 static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
                             struct device *parent);
@@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev)
 {
 	unsigned long io_io_low, io_io_high;
 
-	if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
+	if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
 		return;
 
-	if(dev->id.hw_type == HPHW_IOA) {
+	if (dev->id.hw_type == HPHW_IOA) {
 		io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16);
 		io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET;
 	} else {
@@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev)
 
 	print_pa_hwpath(dev, hw_path);
 	printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
-		++count, dev->name, dev->hpa, hw_path, dev->id.hw_type,
+		++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type,
 		dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
 
 	if (dev->num_addrs) {
@@ -753,13 +847,20 @@ void init_parisc_bus(void)
 	get_device(&root);
 }
 
+
+static int print_one_device(struct device * dev, void * data)
+{
+	struct parisc_device * pdev = to_parisc_device(dev);
+
+	if (check_dev(dev))
+		print_parisc_device(pdev);
+	return 0;
+}
+
 /**
  * print_parisc_devices - Print out a list of devices found in this system
  */
 void print_parisc_devices(void)
 {
-	struct parisc_device *dev;
-	for_each_padev(dev) {
-		print_parisc_device(dev);
-	}
+	for_each_padev(print_one_device, NULL);
 }
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index be0f07f2fa58..c7e66ee5b083 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -30,14 +30,14 @@
  *  - save registers to kernel stack and handle in assembly or C */
 
 
+#include <asm/psw.h>
 #include <asm/assembly.h>	/* for LDREG/STREG defines */
 #include <asm/pgtable.h>
-#include <asm/psw.h>
 #include <asm/signal.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define CMPIB           cmpib,*
 #define CMPB            cmpb,*
 #define COND(x)		*x
@@ -67,19 +67,22 @@
 
 	/* Switch to virtual mapping, trashing only %r1 */
 	.macro  virt_map
-	rsm     PSW_SM_Q,%r0
-	tovirt_r1 %r29
-	mfsp	%sr7, %r1
-	or,=    %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
-	mtsp	%r1, %sr3
+	/* pcxt_ssm_bug */
+	rsm	PSW_SM_I, %r0	/* barrier for "Relied upon Translation */
 	mtsp	%r0, %sr4
 	mtsp	%r0, %sr5
+	mfsp	%sr7, %r1
+	or,=    %r0,%r1,%r0	/* Only save sr7 in sr3 if sr7 != 0 */
+	mtsp	%r1, %sr3
+	tovirt_r1 %r29
+	load32	KERNEL_PSW, %r1
+
+	rsm     PSW_SM_QUIET,%r0	/* second "heavy weight" ctl op */
 	mtsp	%r0, %sr6
 	mtsp	%r0, %sr7
-	load32	KERNEL_PSW, %r1
-	mtctl	%r1, %cr22
 	mtctl	%r0, %cr17	/* Clear IIASQ tail */
 	mtctl	%r0, %cr17	/* Clear IIASQ head */
+	mtctl	%r1, %ipsw
 	load32	4f, %r1
 	mtctl	%r1, %cr18	/* Set IIAOQ tail */
 	ldo	4(%r1), %r1
@@ -214,7 +217,7 @@
 	va  = r8	/* virtual address for which the trap occured */
 	spc = r24	/* space for which the trap occured */
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 
 	/*
 	 * itlb miss interruption handler (parisc 1.1 - 32 bit)
@@ -236,7 +239,7 @@
 
 	.macro	itlb_20 code
 	mfctl	%pcsq, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       itlb_miss_20w
 #else
 	b	itlb_miss_20
@@ -246,7 +249,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * naitlb miss interruption handler (parisc 1.1 - 32 bit)
 	 *
@@ -283,7 +286,7 @@
 	.macro	naitlb_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       itlb_miss_20w
 #else
 	b	itlb_miss_20
@@ -296,7 +299,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * dtlb miss interruption handler (parisc 1.1 - 32 bit)
 	 */
@@ -318,7 +321,7 @@
 	.macro	dtlb_20 code
 
 	mfctl	%isr, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       dtlb_miss_20w
 #else
 	b	dtlb_miss_20
@@ -328,7 +331,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */
 
 	.macro	nadtlb_11 code
@@ -346,7 +349,7 @@
 	.macro	nadtlb_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       nadtlb_miss_20w
 #else
 	b       nadtlb_miss_20
@@ -356,7 +359,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * dirty bit trap interruption handler (parisc 1.1 - 32 bit)
 	 */
@@ -378,7 +381,7 @@
 	.macro	dbit_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       dbit_trap_20w
 #else
 	b	dbit_trap_20
@@ -391,7 +394,7 @@
 	/* The following are simple 32 vs 64 bit instruction
 	 * abstractions for the macros */
 	.macro		EXTR	reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		\reg1,32+\start,\length,\reg2
 #else
 	extrw,u		\reg1,\start,\length,\reg2
@@ -399,7 +402,7 @@
 	.endm
 
 	.macro		DEP	reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depd		\reg1,32+\start,\length,\reg2
 #else
 	depw		\reg1,\start,\length,\reg2
@@ -407,7 +410,7 @@
 	.endm
 
 	.macro		DEPI	val,start,length,reg
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi		\val,32+\start,\length,\reg
 #else
 	depwi		\val,\start,\length,\reg
@@ -418,7 +421,7 @@
 	 * fault.  We have to extract this and place it in the va,
 	 * zeroing the corresponding bits in the space register */
 	.macro		space_adjust	spc,va,tmp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		\spc,63,SPACEID_SHIFT,\tmp
 	depd		%r0,63,SPACEID_SHIFT,\spc
 	depd		\tmp,31,SPACEID_SHIFT,\va
@@ -476,7 +479,7 @@
 	bb,>=,n		\pmd,_PxD_PRESENT_BIT,\fault
 	DEP		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
 	copy		\pmd,%r9
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld		%r9,PxD_VALUE_SHIFT,\pmd
 #else
 	shlw		%r9,PxD_VALUE_SHIFT,\pmd
@@ -607,7 +610,7 @@
 	.macro		do_alias	spc,tmp,tmp1,va,pte,prot,fault
 	cmpib,COND(<>),n 0,\spc,\fault
 	ldil		L%(TMPALIAS_MAP_START),\tmp
-#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000)
+#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000)
 	/* on LP64, ldi will sign extend into the upper 32 bits,
 	 * which is behaviour we don't want */
 	depdi		0,31,32,\tmp
@@ -621,7 +624,7 @@
 	 * OK, it is in the temp alias region, check whether "from" or "to".
 	 * Check "subtle" note in pacache.S re: r23/r26.
 	 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u,*=	\va,41,1,%r0
 #else
 	extrw,u,=	\va,9,1,%r0
@@ -688,7 +691,7 @@ fault_vector_20:
 	def		30
 	def		31
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 
 	.export fault_vector_11
 	
@@ -761,7 +764,7 @@ __kernel_thread:
 
 	copy	%r30, %r1
 	ldo	PT_SZ_ALGN(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Yo, function pointers in wide mode are little structs... -PB */
 	ldd	24(%r26), %r2
 	STREG	%r2, PT_GR27(%r1)	/* Store childs %dp */
@@ -777,7 +780,7 @@ __kernel_thread:
 	or	%r26, %r24, %r26      /* will have kernel mappings.	 */
 	ldi	1, %r25			/* stack_start, signals kernel thread */
 	stw	%r0, -52(%r30)	     	/* user_tid */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 	BL	do_fork, %r2
@@ -806,7 +809,7 @@ ret_from_kernel_thread:
 
 	LDREG	TI_TASK-THREAD_SZ_ALGN(%r30), %r1
 	LDREG	TASK_PT_GR25(%r1), %r26
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG	TASK_PT_GR27(%r1), %r27
 	LDREG	TASK_PT_GR22(%r1), %r22
 #endif
@@ -814,11 +817,16 @@ ret_from_kernel_thread:
 	ble	0(%sr7, %r1)
 	copy	%r31, %r2
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 	loadgp				/* Thread could have been in a module */
 #endif
+#ifndef CONFIG_64BIT
 	b	sys_exit
+#else
+	load32	sys_exit, %r1
+	bv	%r0(%r1)
+#endif
 	ldi	0, %r26
 
 	.import	sys_execve, code
@@ -830,7 +838,7 @@ __execve:
 	STREG	%r26, PT_GR26(%r16)
 	STREG	%r25, PT_GR25(%r16)
 	STREG	%r24, PT_GR24(%r16)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 	BL	sys_execve, %r2
@@ -855,6 +863,7 @@ __execve:
 _switch_to:
 	STREG	 %r2, -RP_OFFSET(%r30)
 
+	callee_save_float
 	callee_save
 
 	load32	_switch_to_ret, %r2
@@ -871,6 +880,7 @@ _switch_to:
 _switch_to_ret:
 	mtctl	%r0, %cr0		/* Needed for single stepping */
 	callee_rest
+	callee_rest_float
 
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
@@ -888,9 +898,6 @@ _switch_to_ret:
 	 * this way, then we will need to copy %sr3 in to PT_SR[3..7], and
 	 * adjust IASQ[0..1].
 	 *
-	 * Note that the following code uses a "relied upon translation".
-	 * See the parisc ACD for details. The ssm is necessary due to a
-	 * PCXT bug.
 	 */
 
 	.align 4096
@@ -911,7 +918,7 @@ syscall_exit_rfi:
 	STREG	%r19,PT_IAOQ1(%r16)
 	LDREG   PT_PSW(%r16),%r19
 	load32	USER_PSW_MASK,%r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	load32	USER_PSW_HI_MASK,%r20
 	depd    %r20,31,32,%r1
 #endif
@@ -955,7 +962,7 @@ intr_return:
 	/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount
 	** irq_stat[] is defined using ____cacheline_aligned.
 	*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld	%r1, 6, %r20
 #else
 	shlw	%r1, 5, %r20
@@ -963,9 +970,6 @@ intr_return:
 	add     %r19,%r20,%r19	/* now have &irq_stat[smp_processor_id()] */
 #endif /* CONFIG_SMP */
 
-	LDREG   IRQSTAT_SIRQ_PEND(%r19),%r20    /* hardirq.h: unsigned long */
-	cmpib,<>,n 0,%r20,intr_do_softirq /* forward */
-
 intr_check_resched:
 
 	/* check for reschedule */
@@ -985,24 +989,19 @@ intr_restore:
 	rest_fp         %r1
 	rest_general    %r29
 
-	/* Create a "relied upon translation" PA 2.0 Arch. F-5 */
-	ssm		0,%r0
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
+	/* inverse of virt_map */
+	pcxt_ssm_bug
+	rsm             PSW_SM_QUIET,%r0	/* prepare for rfi */
 	tophys_r1       %r29
-	rsm             (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0
 
 	/* Restore space id's and special cr's from PT_REGS
-	 * structure pointed to by r29 */
+	 * structure pointed to by r29
+	 */
 	rest_specials	%r29
 
-	/* Important: Note that rest_stack restores r29
-	 * last (we are using it)! It also restores r1 and r30. */
+	/* IMPORTANT: rest_stack restores r29 last (we are using it)!
+	 * It also restores r1 and r30.
+	 */
 	rest_stack
 
 	rfi
@@ -1015,17 +1014,6 @@ intr_restore:
 	nop
 	nop
 
-	.import do_softirq,code
-intr_do_softirq:
-	bl      do_softirq,%r2
-#ifdef __LP64__
-	ldo	-16(%r30),%r29		/* Reference param save area */
-#else
-	nop
-#endif
-	b       intr_check_resched
-	nop
-
 	.import schedule,code
 intr_do_resched:
 	/* Only do reschedule if we are returning to user space */
@@ -1036,12 +1024,17 @@ intr_do_resched:
 	CMPIB= 0,%r20,intr_restore /* backward */
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
 	ldil	L%intr_check_sig, %r2
+#ifndef CONFIG_64BIT
 	b	schedule
+#else
+	load32	schedule, %r20
+	bv	%r0(%r20)
+#endif
 	ldo	R%intr_check_sig(%r2), %r2
 
 
@@ -1064,7 +1057,7 @@ intr_do_signal:
 
 	copy	%r0, %r24			/* unsigned long in_syscall */
 	copy	%r16, %r25			/* struct pt_regs *regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 
@@ -1088,7 +1081,7 @@ intr_extint:
 	mfctl	%cr31,%r1
 	copy	%r30,%r17
 	/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi	0,63,15,%r17
 #else
 	depi	0,31,15,%r17
@@ -1115,7 +1108,7 @@ intr_extint:
 
 	ldil	L%intr_return, %r2
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29	/* Reference param save area */
 #endif
 
@@ -1153,15 +1146,17 @@ intr_save:
 
 	CMPIB=,n        6,%r26,skip_save_ior
 
-	/* save_specials left ipsw value in r8 for us to test */
 
 	mfctl           %cr20, %r16 /* isr */
+	nop		/* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */
 	mfctl           %cr21, %r17 /* ior */
 
-#ifdef __LP64__
+
+#ifdef CONFIG_64BIT
 	/*
 	 * If the interrupted code was running with W bit off (32 bit),
 	 * clear the b bits (bits 0 & 1) in the ior.
+	 * save_specials left ipsw value in r8 for us to test.
 	 */
 	extrd,u,*<>     %r8,PSW_W_BIT,1,%r0
 	depdi           0,1,2,%r17
@@ -1192,7 +1187,7 @@ skip_save_ior:
 	loadgp
 
 	copy		%r29, %r25	/* arg1 is pt_regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo		-16(%r30),%r29	/* Reference param save area */
 #endif
 
@@ -1230,7 +1225,7 @@ skip_save_ior:
 	spc  = r24	/* space for which the trap occured */
 	ptp = r25	/* page directory/page table pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 dtlb_miss_20w:
 	space_adjust	spc,va,t0
@@ -1487,10 +1482,10 @@ nadtlb_emulate:
 	add,l           %r1,%r24,%r1           /* doesn't affect c/b bits */
 
 nadtlb_nullify:
-	mfctl           %cr22,%r8              /* Get ipsw */
+	mfctl           %ipsw,%r8
 	ldil            L%PSW_N,%r9
 	or              %r8,%r9,%r8            /* Set PSW_N */
-	mtctl           %r8,%cr22
+	mtctl           %r8,%ipsw
 
 	rfir
 	nop
@@ -1521,7 +1516,7 @@ nadtlb_probe_check:
 	nop
 
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 itlb_miss_20w:
 
 	/*
@@ -1588,7 +1583,7 @@ itlb_miss_20:
 
 #endif
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 dbit_trap_20w:
 	space_adjust	spc,va,t0
@@ -1797,7 +1792,7 @@ sys_fork_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1847,7 +1842,7 @@ sys_clone_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1869,7 +1864,7 @@ sys_vfork_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1897,10 +1892,10 @@ sys_vfork_wrapper:
 
 	STREG %r2,-RP_OFFSET(%r30)
 	ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
-	bl \execve,%r2
+	BL \execve,%r2
 	copy %r1,%arg0
 
 	ldo -FRAME_SIZE(%r30),%r30
@@ -1923,7 +1918,7 @@ error_\execve:
 sys_execve_wrapper:
 	execve_wrapper sys_execve
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.export sys32_execve_wrapper
 	.import sys32_execve
 
@@ -1937,7 +1932,7 @@ sys_rt_sigreturn_wrapper:
 	ldo	TASK_REGS(%r26),%r26	/* get pt regs */
 	/* Don't save regs, we are going to restore them from sigcontext. */
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	BL	sys_rt_sigreturn,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -1968,7 +1963,7 @@ sys_sigaltstack_wrapper:
 	ldo	TASK_REGS(%r1),%r24	/* get pt regs */
 	LDREG	TASK_PT_GR30(%r24),%r24
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	b,l	do_sigaltstack,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -1982,7 +1977,7 @@ sys_sigaltstack_wrapper:
 	bv	%r0(%r2)
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.export sys32_sigaltstack_wrapper
 sys32_sigaltstack_wrapper:
 	/* Get the user stack pointer */
@@ -2006,7 +2001,7 @@ sys_rt_sigsuspend_wrapper:
 	reg_save %r24
 
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	b,l	sys_rt_sigsuspend,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -2079,7 +2074,7 @@ syscall_check_bh:
 	ldw     TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */
 
 	/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld	%r26, 6, %r20
 #else
 	shlw	%r26, 5, %r20
@@ -2087,9 +2082,6 @@ syscall_check_bh:
 	add     %r19,%r20,%r19	/* now have &irq_stat[smp_processor_id()] */
 #endif /* CONFIG_SMP */
 
-	LDREG   IRQSTAT_SIRQ_PEND(%r19),%r20    /* hardirq.h: unsigned long */
-	cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */
-
 syscall_check_resched:
 
 	/* check for reschedule */
@@ -2144,7 +2136,7 @@ syscall_restore:
 
 	depi	3,31,2,%r31			   /* ensure return to user mode. */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* decide whether to reset the wide mode bit
 	 *
 	 * For a syscall, the W bit is stored in the lowest bit
@@ -2227,20 +2219,10 @@ pt_regs_ok:
 	b	intr_restore
 	nop
 
-	.import do_softirq,code
-syscall_do_softirq:
-	bl      do_softirq,%r2
-	nop
-	/* NOTE: We enable I-bit incase we schedule later,
-	 * and we might be going back to userspace if we were
-	 * traced. */
-	b       syscall_check_resched
-	ssm     PSW_SM_I, %r0  /* do_softirq returns with I bit off */
-
 	.import schedule,code
 syscall_do_resched:
 	BL	schedule,%r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #else
 	nop
@@ -2260,7 +2242,7 @@ syscall_do_signal:
 
 	ldi	1, %r24				/* unsigned long in_syscall */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	BL	do_signal,%r2
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index f244fb200db1..553f8fe03224 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8)));
 int parisc_narrow_firmware = 1;
 #endif
 
-/* on all currently-supported platforms, IODC I/O calls are always
- * 32-bit calls, and MEM_PDC calls are always the same width as the OS.
- * This means Cxxx boxes can't run wide kernels right now. -PB
+/* On most currently-supported platforms, IODC I/O calls are 32-bit calls
+ * and MEM_PDC calls are always the same width as the OS.
+ * Some PAT boxes may have 64-bit IODC I/O.
  *
- * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on
- * systems with 32-bit MEM_PDC calls. This will allow wide kernels to
- * run on Cxxx boxes now. -RB
- *
- * Note that some PAT boxes may have 64-bit IODC I/O...
+ * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow
+ * 64-bit kernels to run on systems with 32-bit MEM_PDC calls.
+ * This allowed wide kernels to run on Cxxx boxes.
+ * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode
+ * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
  */
 
 #ifdef __LP64__
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 28405edf8448..0b47afc20690 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -12,7 +12,7 @@
  * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de>
  */
 
-#include <linux/autoconf.h>	/* for CONFIG_SMP */
+#include <linux/config.h>	/* for CONFIG_SMP */
 
 #include <asm/asm-offsets.h>
 #include <asm/psw.h>
@@ -36,10 +36,10 @@ boot_args:
 	.align	4
 	.import init_thread_union,data
 	.import fault_vector_20,code    /* IVA parisc 2.0 32 bit */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
         .import fault_vector_11,code    /* IVA parisc 1.1 32 bit */
 	.import	$global$		/* forward declaration */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 	.export stext
 	.export _stext,data		/* Kernel want it this way! */
 _stext:
@@ -76,7 +76,7 @@ $bss_loop:
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Set pmd in pgd */
 	load32		PA(pmd0),%r5
 	shrd            %r5,PxD_VALUE_SHIFT,%r3	
@@ -99,7 +99,7 @@ $bss_loop:
 	stw		%r3,0(%r4)
 	ldo		(ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
 	addib,>		-1,%r1,1b
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo             ASM_PMD_ENTRY_SIZE(%r4),%r4
 #else
 	ldo             ASM_PGD_ENTRY_SIZE(%r4),%r4
@@ -170,7 +170,7 @@ common_stext:
 	stw		%r0,0x28(%r0)	/* MEM_RENDEZ_HI */
 #endif /*CONFIG_SMP*/
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	tophys_r1	%sp
 
 	/* Save the rfi target address */
@@ -224,8 +224,6 @@ stext_pdc_ret:
 	mtctl	%r0,%cr12
 	mtctl	%r0,%cr13
 
-	/* Prepare to RFI! Man all the cannons! */
-
 	/* Initialize the global data pointer */
 	loadgp
 
@@ -235,7 +233,7 @@ stext_pdc_ret:
 	 * following short sequence of instructions can determine this
 	 * (without being illegal on a PA1.1 machine).
 	 */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	ldi		32,%r10
 	mtctl		%r10,%cr11
 	.level 2.0
@@ -248,52 +246,22 @@ stext_pdc_ret:
 
 $is_pa20:
 	.level		LEVEL /* restore 1.1 || 2.0w */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 	load32		PA(fault_vector_20),%r10
 
 $install_iva:
 	mtctl		%r10,%cr14
 
-#ifdef __LP64__
-	b		aligned_rfi
+	b		aligned_rfi  /* Prepare to RFI! Man all the cannons! */
 	nop
 
-	.align          256
+	.align 128
 aligned_rfi:
-	ssm             0,0
-	nop             /* 1 */
-	nop             /* 2 */
-	nop             /* 3 */
-	nop             /* 4 */
-	nop             /* 5 */
-	nop             /* 6 */
-	nop             /* 7 */
-	nop             /* 8 */
-#endif
+	pcxt_ssm_bug
 
-#ifdef __LP64__ /* move to psw.h? */
-#define		PSW_BITS	PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R
-#else
-#define		PSW_BITS	PSW_SM_Q
-#endif
+	rsm		PSW_SM_QUIET,%r0	/* off troublesome PSW bits */
+	/* Don't need NOPs, have 8 compliant insn before rfi */
 
-$rfi:	
-	/* turn off troublesome PSW bits */
-	rsm		PSW_BITS,%r0
-
-	/* kernel PSW:
-	 *  - no interruptions except HPMC and TOC (which are handled by PDC)
-	 *  - Q bit set (IODC / PDC interruptions)
-	 *  - big-endian
-	 *  - virtually mapped
-	 */
-	load32		KERNEL_PSW,%r10
-	mtctl		%r10,%ipsw
-
-	/* Set the space pointers for the post-RFI world
-	** Clear the two-level IIA Space Queue, effectively setting
-	** Kernel space.
-	*/
 	mtctl		%r0,%cr17	/* Clear IIASQ tail */
 	mtctl		%r0,%cr17	/* Clear IIASQ head */
 
@@ -301,8 +269,11 @@ $rfi:
 	mtctl		%r11,%cr18	/* IIAOQ head */
 	ldo		4(%r11),%r11
 	mtctl		%r11,%cr18	/* IIAOQ tail */
+
+	load32		KERNEL_PSW,%r10
+	mtctl		%r10,%ipsw
 	
-	/* Jump to hyperspace */
+	/* Jump through hyperspace to Virt Mode */
 	rfi
 	nop
 
@@ -313,7 +284,7 @@ $rfi:
 	.import smp_init_current_idle_task,data
 	.import	smp_callin,code
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 smp_callin_rtn:
         .proc
 	.callinfo
@@ -321,7 +292,7 @@ smp_callin_rtn:
 	nop
 	nop
         .procend
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 
 /***************************************************************************
 * smp_slave_stext is executed by all non-monarch Processors when the Monarch
@@ -356,7 +327,7 @@ smp_slave_stext:
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Setup PDCE_PROC entry */
 	copy            %arg0,%r3
 #else
@@ -373,7 +344,7 @@ smp_slave_stext:
 
 	.procend
 #endif /* CONFIG_SMP */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	.data
 
 	.align	4
@@ -383,4 +354,4 @@ smp_slave_stext:
 	.size	$global$,4
 $global$:	
 	.word 0
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c
index 1d3824b670d1..8cad8f004f00 100644
--- a/arch/parisc/kernel/ioctl32.c
+++ b/arch/parisc/kernel/ioctl32.c
@@ -104,12 +104,9 @@ static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg)
 	}
 
 out:
-	if (kversion.name)
-		kfree(kversion.name);
-	if (kversion.date)
-		kfree(kversion.date);
-	if (kversion.desc)
-		kfree(kversion.desc);
+	kfree(kversion.name);
+	kfree(kversion.date);
+	kfree(kversion.desc);
 	return ret;
 }
 
@@ -166,9 +163,7 @@ static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long a
 			ret = -EFAULT;
 	}
 
-	if (karg.unique != NULL)
-		kfree(karg.unique);
-
+	kfree(karg.unique);
 	return ret;
 }
 
@@ -265,7 +260,6 @@ static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
 	}
 
 	kfree(karg.list);
-
 	return ret;
 }
 
@@ -305,7 +299,6 @@ static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
 
 out:
 	kfree(karg.list);
-
 	return ret;
 }
 
@@ -494,15 +487,10 @@ static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
 	}
 
 out:
-	if (karg.send_indices)
-		kfree(karg.send_indices);
-	if (karg.send_sizes)
-		kfree(karg.send_sizes);
-	if (karg.request_indices)
-		kfree(karg.request_indices);
-	if (karg.request_sizes)
-		kfree(karg.request_sizes);
-
+	kfree(karg.send_indices);
+	kfree(karg.send_sizes);
+	kfree(karg.request_indices);
+	kfree(karg.request_sizes);
 	return ret;
 }
 
@@ -555,9 +543,7 @@ static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg)
 			ret = -EFAULT;
 	}
 
-	if (karg.contexts)
-		kfree(karg.contexts);
-
+	kfree(karg.contexts);
 	return ret;
 }
 
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 77e03bc0f935..9534ee17b9be 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -26,7 +26,7 @@
  *       can be used.
  */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define ADDIB	addib,*
 #define CMPB	cmpb,*
 #define ANDCM	andcm,*
@@ -40,8 +40,10 @@
 	.level	2.0
 #endif
 
-#include <asm/assembly.h>
+#include <linux/config.h>
+
 #include <asm/psw.h>
+#include <asm/assembly.h>
 #include <asm/pgtable.h>
 #include <asm/cache.h>
 
@@ -62,32 +64,23 @@ flush_tlb_all_local:
 	 * to happen in real mode with all interruptions disabled.
 	 */
 
-	/*
-	 * Once again, we do the rfi dance ... some day we need examine
-	 * all of our uses of this type of code and see what can be
-	 * consolidated.
-	 */
-
-	rsm		PSW_SM_I, %r19		/* relied upon translation! PA 2.0 Arch. F-5 */
+	/* pcxt_ssm_bug	- relied upon translation! PA 2.0 Arch. F-4 and F-5 */
+	rsm	PSW_SM_I, %r19		/* save I-bit state */
+	load32		PA(1f), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
-	nop
-	nop
-	
-	rsm		PSW_SM_Q, %r0		/* Turn off Q bit to load iia queue */
-	ldil		L%REAL_MODE_PSW, %r1
-	ldo		R%REAL_MODE_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%PA(1f), %r1
-	ldo		R%PA(1f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		REAL_MODE_PSW, %r1
+	mtctl           %r1, %ipsw
 	rfi
 	nop
 
@@ -178,29 +171,36 @@ fdtonemiddle:					/* Loop if LOOP = 1 */
 	ADDIB>		-1, %r22, fdtoneloop	/* Outer loop count decr */
 	add		%r21, %r20, %r20	/* increment space */
 
-fdtdone:
 
-	/* Switch back to virtual mode */
+fdtdone:
+	/*
+	 * Switch back to virtual mode
+	 */
+	/* pcxt_ssm_bug */
+	rsm		PSW_SM_I, %r0
+	load32		2f, %r1
+	nop
+	nop
+	nop
+	nop
+	nop
 
-	rsm		PSW_SM_Q, %r0		/* clear Q bit to load iia queue */
-	ldil		L%KERNEL_PSW, %r1
-	ldo		R%KERNEL_PSW(%r1), %r1
-	or		%r1, %r19, %r1		/* Set I bit if set on entry */
-	mtctl		%r1, %cr22
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%(2f), %r1
-	ldo		R%(2f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		KERNEL_PSW, %r1
+	or		%r1, %r19, %r1	/* I-bit to state on entry */
+	mtctl		%r1, %ipsw	/* restore I-bit (entire PSW) */
 	rfi
 	nop
 
 2:      bv		%r0(%r2)
 	nop
-	.exit
 
+	.exit
 	.procend
 
 	.export flush_instruction_cache_local,code
@@ -227,7 +227,7 @@ flush_instruction_cache_local:
 
 fimanyloop:					/* Loop if LOOP >= 2 */
 	ADDIB>		-1, %r31, fimanyloop	/* Adjusted inner loop decr */
-	fice            0(%sr1, %arg0)
+	fice            %r0(%sr1, %arg0)
 	fice,m		%arg1(%sr1, %arg0)	/* Last fice and addr adjust */
 	movb,tr		%arg3, %r31, fimanyloop	/* Re-init inner loop count */
 	ADDIB<=,n	-1, %arg2, fisync	/* Outer loop decr */
@@ -238,7 +238,7 @@ fioneloop:					/* Loop if LOOP = 1 */
 
 fisync:
 	sync
-	mtsm		%r22
+	mtsm		%r22			/* restore I-bit */
 	bv		%r0(%r2)
 	nop
 	.exit
@@ -269,7 +269,7 @@ flush_data_cache_local:
 
 fdmanyloop:					/* Loop if LOOP >= 2 */
 	ADDIB>		-1, %r31, fdmanyloop	/* Adjusted inner loop decr */
-	fdce		0(%sr1, %arg0)
+	fdce		%r0(%sr1, %arg0)
 	fdce,m		%arg1(%sr1, %arg0)	/* Last fdce and addr adjust */
 	movb,tr		%arg3, %r31, fdmanyloop	/* Re-init inner loop count */
 	ADDIB<=,n	-1, %arg2, fdsync	/* Outer loop decr */
@@ -281,7 +281,7 @@ fdoneloop:					/* Loop if LOOP = 1 */
 fdsync:
 	syncdma
 	sync
-	mtsm		%r22
+	mtsm		%r22			/* restore I-bit */
 	bv		%r0(%r2)
 	nop
 	.exit
@@ -296,7 +296,7 @@ copy_user_page_asm:
 	.callinfo NO_CALLS
 	.entry
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* PA8x00 CPUs can consume 2 loads or 1 store per cycle.
 	 * Unroll the loop by hand and arrange insn appropriately.
 	 * GCC probably can do this just as well.
@@ -351,7 +351,11 @@ copy_user_page_asm:
 	std		%r22, 120(%r26)
 	ldo		128(%r26), %r26
 
-	ADDIB>		-1, %r1, 1b		/* bundle 10 */
+	/* conditional branches nullify on forward taken branch, and on
+	 * non-taken backward branch. Note that .+4 is a backwards branch.
+	 * The ldd should only get executed if the branch is taken.
+	 */
+	ADDIB>,n	-1, %r1, 1b		/* bundle 10 */
 	ldd		0(%r25), %r19		/* start next loads */
 
 #else
@@ -363,10 +367,10 @@ copy_user_page_asm:
 	 * the full 64 bit register values on interrupt, we can't
 	 * use ldd/std on a 32 bit kernel.
 	 */
+	ldw		0(%r25), %r19
 	ldi		64, %r1		/* PAGE_SIZE/64 == 64 */
 
 1:
-	ldw		0(%r25), %r19
 	ldw		4(%r25), %r20
 	ldw		8(%r25), %r21
 	ldw		12(%r25), %r22
@@ -396,11 +400,12 @@ copy_user_page_asm:
 	ldw		60(%r25), %r22
 	stw		%r19, 48(%r26)
 	stw		%r20, 52(%r26)
+	ldo		64(%r25), %r25
 	stw		%r21, 56(%r26)
 	stw		%r22, 60(%r26)
 	ldo		64(%r26), %r26
-	ADDIB>		-1, %r1, 1b
-	ldo		64(%r25), %r25
+	ADDIB>,n	-1, %r1, 1b
+	ldw		0(%r25), %r19
 #endif
 	bv		%r0(%r2)
 	nop
@@ -456,7 +461,7 @@ copy_user_page_asm:
 	sub		%r25, %r1, %r23		/* move physical addr into non shadowed reg */
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		%r26,56,32, %r26		/* convert phys addr to tlb insert format */
 	extrd,u		%r23,56,32, %r23		/* convert phys addr to tlb insert format */
 	depd		%r24,63,22, %r28		/* Form aliased virtual address 'to' */
@@ -543,7 +548,7 @@ __clear_user_page_asm:
 	tophys_r1	%r26
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #if (TMPALIAS_MAP_START >= 0x80000000)
 	depdi		0, 31,32, %r28		/* clear any sign extension */
 #endif
@@ -560,7 +565,7 @@ __clear_user_page_asm:
 
 	pdtlb		0(%r28)
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldi		32, %r1			/* PAGE_SIZE/128 == 32 */
 
 	/* PREFETCH (Write) has not (yet) been proven to help here */
@@ -585,7 +590,7 @@ __clear_user_page_asm:
 	ADDIB>		-1, %r1, 1b
 	ldo		128(%r28), %r28
 
-#else	/* ! __LP64 */
+#else	/* ! CONFIG_64BIT */
 
 	ldi		64, %r1			/* PAGE_SIZE/64 == 64 */
 
@@ -608,7 +613,7 @@ __clear_user_page_asm:
 	stw		%r0, 60(%r28)
 	ADDIB>		-1, %r1, 1b
 	ldo		64(%r28), %r28
-#endif	/* __LP64 */
+#endif	/* CONFIG_64BIT */
 
 	bv		%r0(%r2)
 	nop
@@ -626,7 +631,7 @@ flush_kernel_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -670,7 +675,7 @@ flush_user_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1,63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1,31-PAGE_SHIFT,1, %r25
@@ -714,7 +719,7 @@ flush_user_icache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -759,7 +764,7 @@ purge_kernel_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -807,7 +812,7 @@ flush_alias_page:
 	tophys_r1		%r26
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		%r26, 56,32, %r26	/* convert phys addr to tlb insert format */
 	depd		%r25, 63,22, %r28	/* Form aliased virtual address 'to' */
 	depdi		0, 63,12, %r28		/* Clear any offset bits */
@@ -824,7 +829,7 @@ flush_alias_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r29
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r29
@@ -935,7 +940,7 @@ flush_kernel_icache_page:
 	ldil		L%icache_stride, %r1
 	ldw		R%icache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -944,23 +949,23 @@ flush_kernel_icache_page:
 	sub		%r25, %r23, %r25
 
 
-1:      fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
+1:      fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
 	CMPB<<		%r26, %r25, 1b
-	fic,m		%r23(%r26)
+	fic,m		%r23(%sr4, %r26)
 
 	sync
 	bv		%r0(%r2)
@@ -982,17 +987,18 @@ flush_kernel_icache_range_asm:
 	ANDCM		%r26, %r21, %r26
 
 1:      CMPB<<,n	%r26, %r25, 1b
-	fic,m		%r23(%r26)
+	fic,m		%r23(%sr4, %r26)
 
 	sync
 	bv		%r0(%r2)
 	nop
 	.exit
-
 	.procend
 
-	.align	128
-
+	/* align should cover use of rfi in disable_sr_hashing_asm and
+	 * srdis_done.
+	 */
+	.align	256
 	.export disable_sr_hashing_asm,code
 
 disable_sr_hashing_asm:
@@ -1000,28 +1006,26 @@ disable_sr_hashing_asm:
 	.callinfo NO_CALLS
 	.entry
 
-	/* Switch to real mode */
-
-	ssm		0, %r0			/* relied upon translation! */
-	nop
-	nop
+	/*
+	 * Switch to real mode
+	 */
+	/* pcxt_ssm_bug */
+	rsm		PSW_SM_I, %r0
+	load32		PA(1f), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
-	
-	rsm		(PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */
-	ldil		L%REAL_MODE_PSW, %r1
-	ldo		R%REAL_MODE_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%PA(1f), %r1
-	ldo		R%PA(1f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		REAL_MODE_PSW, %r1
+	mtctl		%r1, %ipsw
 	rfi
 	nop
 
@@ -1053,27 +1057,31 @@ srdis_pcxl:
 
 srdis_pa20:
 
-	/* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */
+	/* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */
 
 	.word		0x144008bc		/* mfdiag %dr2, %r28 */
 	depdi		0, 54,1, %r28		/* clear DIAG_SPHASH_ENAB (bit 54) */
 	.word		0x145c1840		/* mtdiag %r28, %dr2 */
 
-srdis_done:
 
+srdis_done:
 	/* Switch back to virtual mode */
+	rsm		PSW_SM_I, %r0		/* prep to load iia queue */
+	load32 	   	2f, %r1
+	nop
+	nop
+	nop
+	nop
+	nop
 
-	rsm		PSW_SM_Q, %r0		/* clear Q bit to load iia queue */
-	ldil		L%KERNEL_PSW, %r1
-	ldo		R%KERNEL_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil 	   	L%(2f), %r1
-	ldo     	R%(2f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		KERNEL_PSW, %r1
+	mtctl		%r1, %ipsw
 	rfi
 	nop
 
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 844c2877a2e3..ae6213d71670 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -31,7 +31,7 @@
 #include <asm/page.h>	/* get_order */
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
-
+#include <asm/tlbflush.h>	/* for purge_tlb_*() macros */
 
 static struct proc_dir_entry * proc_gsc_root = NULL;
 static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length);
@@ -333,18 +333,28 @@ pcxl_free_range(unsigned long vaddr, size_t size)
 static int __init
 pcxl_dma_init(void)
 {
-    if (pcxl_dma_start == 0)
-	return 0;
+	if (pcxl_dma_start == 0)
+		return 0;
 
-    spin_lock_init(&pcxl_res_lock);
-    pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
-    pcxl_res_hint = 0;
-    pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
+	spin_lock_init(&pcxl_res_lock);
+	pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
+	pcxl_res_hint = 0;
+	pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
 					    get_order(pcxl_res_size));
-    memset(pcxl_res_map, 0, pcxl_res_size);
-    proc_gsc_root = proc_mkdir("gsc", 0);
-    create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info);
-    return 0;
+	memset(pcxl_res_map, 0, pcxl_res_size);
+	proc_gsc_root = proc_mkdir("gsc", 0);
+	if (!proc_gsc_root)
+    		printk(KERN_WARNING
+			"pcxl_dma_init: Unable to create gsc /proc dir entry\n");
+	else {
+		struct proc_dir_entry* ent;
+		ent = create_proc_info_entry("pcxl_dma", 0,
+				proc_gsc_root, pcxl_proc_info);
+		if (!ent)
+			printk(KERN_WARNING
+				"pci-dma.c: Unable to create pcxl_dma /proc entry.\n");
+	}
+	return 0;
 }
 
 __initcall(pcxl_dma_init);
@@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = {
 
 static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 {
+#if 0
 	u_long i = 0;
 	unsigned long *res_ptr = (u_long *)pcxl_res_map;
-	unsigned long total_pages = pcxl_res_size << 3;        /* 8 bits per byte */
+#endif
+	unsigned long total_pages = pcxl_res_size << 3;   /* 8 bits per byte */
 
-	sprintf(buf, "\nDMA Mapping Area size    : %d bytes (%d pages)\n",
-		PCXL_DMA_MAP_SIZE,
-		(pcxl_res_size << 3) ); /* 1 bit per page */
+	sprintf(buf, "\nDMA Mapping Area size    : %d bytes (%ld pages)\n",
+		PCXL_DMA_MAP_SIZE, total_pages);
 	
-	sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", 
-		buf, pcxl_res_size, pcxl_res_size << 3);   /* 8 bits per byte */
+	sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size);
 
 	strcat(buf,  "     	  total:    free:    used:   % used:\n");
 	sprintf(buf, "%sblocks  %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size,
@@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 	sprintf(buf, "%spages   %8ld %8ld %8ld %8ld%%\n", buf, total_pages,
 		total_pages - pcxl_used_pages, pcxl_used_pages,
 		(pcxl_used_pages * 100 / total_pages));
-	
+
+#if 0
 	strcat(buf, "\nResource bitmap:");
 
 	for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) {
@@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 		    strcat(buf,"\n   ");
 		sprintf(buf, "%s %08lx", buf, *res_ptr);
 	}
+#endif
 	strcat(buf, "\n");
 	return strlen(buf);
 }
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index e6a891a0cad0..88cba49c5301 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -202,7 +202,8 @@ static void
 pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
 {
 	if (!r->parent) {
-		printk(KERN_EMERG "PCI: Tell willy he's wrong\n");
+		printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n",
+				r->start, r->end);
 		r->parent = hba_res;
 
 		/* reverse link is harder *sigh*  */
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 01f676d1673b..215d78c87bc5 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -41,7 +41,7 @@
 
 /* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. 
  * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */
-#undef EARLY_BOOTUP_DEBUG
+#define EARLY_BOOTUP_DEBUG
 
 
 #include <linux/config.h>
@@ -49,14 +49,8 @@
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
 #include <linux/major.h>
 #include <linux/tty.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/system.h>
 #include <asm/pdc.h>		/* for iodc_call() proto and friends */
 
 
@@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options)
 }
 
 #if defined(CONFIG_PDC_CONSOLE)
-#define PDC_CONSOLE_DEVICE pdc_console_device
 static struct tty_driver * pdc_console_device (struct console *c, int *index)
 {
 	extern struct tty_driver console_driver;
@@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index)
 	return &console_driver;
 }
 #else
-#define PDC_CONSOLE_DEVICE NULL
+#define pdc_console_device NULL
 #endif
 
 static struct console pdc_cons = {
 	.name =		"ttyB",
 	.write =	pdc_console_write,
-	.device =	PDC_CONSOLE_DEVICE,
+	.device =	pdc_console_device,
 	.setup =	pdc_console_setup,
-	.flags =	CON_BOOT|CON_PRINTBUFFER|CON_ENABLED,
+	.flags =	CON_BOOT | CON_PRINTBUFFER | CON_ENABLED,
 	.index =	-1,
 };
 
 static int pdc_console_initialized;
-extern unsigned long con_start;	/* kernel/printk.c */
-extern unsigned long log_end;	/* kernel/printk.c */
-
 
 static void pdc_console_init_force(void)
 {
@@ -146,27 +136,11 @@ void __init pdc_console_init(void)
 }
 
 
-/* Unregister the pdc console with the printk console layer */
-void pdc_console_die(void)
-{
-	if (!pdc_console_initialized)
-		return;
-	--pdc_console_initialized;
-
-	printk(KERN_INFO "Switching from PDC console\n");
-
-	/* Don't repeat what we've already printed */
-	con_start = log_end;
-
-	unregister_console(&pdc_cons);
-}
-
-
 /*
  * Used for emergencies. Currently only used if an HPMC occurs. If an
  * HPMC occurs, it is possible that the current console may not be
- * properly initialed after the PDC IO reset. This routine unregisters all
- * of the current consoles, reinitializes the pdc console and
+ * properly initialised after the PDC IO reset. This routine unregisters
+ * all of the current consoles, reinitializes the pdc console and
  * registers it.
  */
 
@@ -177,13 +151,13 @@ void pdc_console_restart(void)
 	if (pdc_console_initialized)
 		return;
 
+	/* If we've already seen the output, don't bother to print it again */
+	if (console_drivers != NULL)
+		pdc_cons.flags &= ~CON_PRINTBUFFER;
+
 	while ((console = console_drivers) != NULL)
 		unregister_console(console_drivers);
 
-	/* Don't repeat what we've already printed */
-	con_start = log_end;
-	
 	/* force registering the pdc console */
 	pdc_console_init_force();
 }
-
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index b3ad0a505b87..44670d6e06f4 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr)
 	uint64_t *bptr;
 	uint32_t dwords;
 	uint32_t *intrigue_rdr;
-	uint64_t *intrigue_bitmask, tmp64, proc_hpa;
+	uint64_t *intrigue_bitmask, tmp64;
+	void __iomem *runway;
 	struct rdr_tbl_ent *tentry;
 	int i;
 
@@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr)
 		return -1;
 	}
 
-	proc_hpa = cpu_device->hpa;
+	runway = ioremap(cpu_device->hpa.start, 4096);
 
 	/* Merge intrigue bits into Runway STATUS 0 */
-	tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful;
-	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS);
+	tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
+	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), 
+		     runway + RUNWAY_STATUS);
 	
 	/* Write RUNWAY DEBUG registers */
 	for (i = 0; i < 8; i++) {
-		__raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i);
+		__raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
 	}
 
 	return 0; 
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 46b759385115..7fdca87ef647 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -9,7 +9,7 @@
  *    Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
  *    Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
  *    Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com>
- *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org>
+ *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
  *    Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
  *    Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org>
  *    Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
@@ -245,7 +245,17 @@ int
 sys_clone(unsigned long clone_flags, unsigned long usp,
 	  struct pt_regs *regs)
 {
-	int __user *user_tid = (int __user *)regs->gr[26];
+  	/* Arugments from userspace are:
+	   r26 = Clone flags.
+	   r25 = Child stack.
+	   r24 = parent_tidptr.
+	   r23 = Is the TLS storage descriptor 
+	   r22 = child_tidptr 
+	   
+	   However, these last 3 args are only examined
+	   if the proper flags are set. */
+	int __user *child_tidptr;
+	int __user *parent_tidptr;
 
 	/* usp must be word aligned.  This also prevents users from
 	 * passing in the value 1 (which is the signal for a special
@@ -253,10 +263,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp,
 	usp = ALIGN(usp, 4);
 
 	/* A zero value for usp means use the current stack */
-	if(usp == 0)
-		usp = regs->gr[30];
+	if (usp == 0)
+	  usp = regs->gr[30];
 
-	return do_fork(clone_flags, usp, regs, 0, user_tid, NULL);
+	if (clone_flags & CLONE_PARENT_SETTID)
+	  parent_tidptr = (int __user *)regs->gr[24];
+	else
+	  parent_tidptr = NULL;
+	
+	if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID))
+	  child_tidptr = (int __user *)regs->gr[22];
+	else
+	  child_tidptr = NULL;
+
+	return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr);
 }
 
 int
@@ -332,6 +352,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		} else {
 			cregs->kpc = (unsigned long) &child_return;
 		}
+		/* Setup thread TLS area from the 4th parameter in clone */
+		if (clone_flags & CLONE_SETTLS)
+		  cregs->cr27 = pregs->gr[23];
+	
 	}
 
 	return 0;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 13b721cb9f55..4f5bbcf1f5a4 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev)
 	 * May get overwritten by PAT code.
 	 */
 	cpuid = boot_cpu_data.cpu_count;
-	txn_addr = dev->hpa;	/* for legacy PDC */
+	txn_addr = dev->hpa.start;	/* for legacy PDC */
 
 #ifdef __LP64__
 	if (is_pdc_pat()) {
@@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev)
  * boot time (ie shutdown a CPU from an OS perspective).
  */
 		/* get the cpu number */
-		status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa);
+		status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start);
 
 		BUG_ON(PDC_OK != status);
 
@@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev)
 			printk(KERN_WARNING "IGNORING CPU at 0x%x,"
 				" cpu_slot_id > NR_CPUS"
 				" (%ld > %d)\n",
-				dev->hpa, cpu_info.cpu_num, NR_CPUS);
+				dev->hpa.start, cpu_info.cpu_num, NR_CPUS);
 			/* Ignore CPU since it will only crash */
 			boot_cpu_data.cpu_count--;
 			return 1;
@@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev)
 
 	p->loops_per_jiffy = loops_per_jiffy;
 	p->dev = dev;		/* Save IODC data in case we need it */
-	p->hpa = dev->hpa;	/* save CPU hpa */
+	p->hpa = dev->hpa.start;	/* save CPU hpa */
 	p->cpuid = cpuid;	/* save CPU id */
 	p->txn_addr = txn_addr;	/* save CPU IRQ address */
 #ifdef CONFIG_SMP
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 8dd5defb7316..8c2859cca77e 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -7,8 +7,10 @@
  * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com)
  *
  */
-#include <asm/assembly.h>
+#include <linux/config.h>
+
 #include <asm/psw.h>
+#include <asm/assembly.h>
 
 	.section	.bss
 	.export real_stack
@@ -20,7 +22,7 @@ real32_stack:
 real64_stack:
 	.block	8192
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #  define REG_SZ 8
 #else
 #  define REG_SZ 4
@@ -50,7 +52,7 @@ save_cr_end:
 
 real32_call_asm:
 	STREG	%rp, -RP_OFFSET(%sp)	/* save RP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	callee_save
 	ldo	2*REG_SZ(%sp), %sp	/* room for a couple more saves */
 	STREG	%r27, -1*REG_SZ(%sp)
@@ -77,7 +79,7 @@ real32_call_asm:
 	b,l	save_control_regs,%r2		/* modifies r1, r2, r28 */
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	rsm	PSW_SM_W, %r0		/* go narrow */
 #endif
 
@@ -85,7 +87,7 @@ real32_call_asm:
 	bv	0(%r31)
 	nop
 ric_ret:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ssm	PSW_SM_W, %r0		/* go wide */
 #endif
 	/* restore CRs before going virtual in case we page fault */
@@ -97,7 +99,7 @@ ric_ret:
 
 	tovirt_r1 %sp
 	LDREG	-REG_SZ(%sp), %sp	/* restore SP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG	-1*REG_SZ(%sp), %r27
 	LDREG	-2*REG_SZ(%sp), %r29
 	ldo	-2*REG_SZ(%sp), %sp
@@ -143,24 +145,21 @@ restore_control_regs:
 /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
  * more general-purpose use by the several places which need RFIs
  */
-	.align 128
 	.text
+	.align 128
 rfi_virt2real:
 	/* switch to real mode... */
-	ssm		0,0		/* See "relied upon translation" */
-	nop				/* PA 2.0 Arch. F-5 */
-	nop
-	nop
+	rsm		PSW_SM_I,%r0
+	load32		PA(rfi_v2r_1), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
 	
-	rsm             (PSW_SM_Q|PSW_SM_I),%r0  /* disable Q & I bits to load iia queue */
+	rsm             PSW_SM_Q,%r0  /* disable Q & I bits to load iia queue */
 	mtctl		%r0, %cr17	/* Clear IIASQ tail */
 	mtctl		%r0, %cr17	/* Clear IIASQ head */
-	load32		PA(rfi_v2r_1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ tail */
@@ -184,10 +183,8 @@ rfi_v2r_1:
 	.text
 	.align 128
 rfi_real2virt:
-	ssm		0,0		/* See "relied upon translation" */
-	nop				/* PA 2.0 Arch. F-5 */
-	nop
-	nop
+	rsm		PSW_SM_I,%r0
+	load32		(rfi_r2v_1), %r1
 	nop
 	nop
 	nop
@@ -197,7 +194,6 @@ rfi_real2virt:
 	rsm             PSW_SM_Q,%r0    /* disable Q bit to load iia queue */
 	mtctl		%r0, %cr17	/* Clear IIASQ tail */
 	mtctl		%r0, %cr17	/* Clear IIASQ head */
-	load32		(rfi_r2v_1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ tail */
@@ -218,7 +214,7 @@ rfi_r2v_1:
 	bv	0(%r2)
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 /************************ 64-bit real-mode calls ***********************/
 /* This is only usable in wide kernels right now and will probably stay so */
@@ -296,7 +292,7 @@ pc_in_user_space:
 	**	comparing function pointers.
 	*/
 __canonicalize_funcptr_for_compare:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	bve (%r2)
 #else
 	bv %r0(%r2)
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 0224651fd8f1..82c24e62ab63 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -490,15 +490,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 give_sigsegv:
 	DBG(1,"setup_rt_frame: sending SIGSEGV\n");
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	si.si_signo = SIGSEGV;
-	si.si_errno = 0;
-	si.si_code = SI_KERNEL;
-	si.si_pid = current->pid;
-	si.si_uid = current->uid;
-	si.si_addr = frame;
-	force_sig_info(SIGSEGV, &si, current);
+	force_sigsegv(sig, current);
 	return 0;
 }
 
@@ -633,10 +625,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
 			put_user(0xe0008200, &usp[3]);
 			put_user(0x34140000, &usp[4]);
 
-			/* Stack is 64-byte aligned, and we only 
-			 * need to flush 1 cache line */
-			asm("fdc 0(%%sr3, %0)\n"
-			    "fic 0(%%sr3, %0)\n"
+			/* Stack is 64-byte aligned, and we only need
+			 * to flush 1 cache line.
+			 * Flushing one cacheline is cheap.
+			 * "sync" on bigger (> 4 way) boxes is not.
+			 */
+			asm("fdc %%r0(%%sr3, %0)\n"
+			    "sync\n"
+			    "fic %%r0(%%sr3, %0)\n"
 			    "sync\n"
 			    : : "r"(regs->gr[30]));
 
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index bcc7e83f5142..5db3be4e2704 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -18,7 +18,7 @@
 */
 #undef ENTRY_SYS_CPUS	/* syscall support for iCOD-like functionality */
 
-#include <linux/autoconf.h>
+#include <linux/config.h>
 
 #include <linux/types.h>
 #include <linux/spinlock.h>
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 8c7a7185cd3b..b29b76b42bb7 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -6,6 +6,7 @@
  * thanks to Philipp Rumpf, Mike Shaver and various others
  * sorry about the wall, puffin..
  */
+#include <linux/config.h> /* for CONFIG_SMP */
 
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
@@ -22,15 +23,13 @@
 	 */
 #define KILL_INSN	break	0,0
 
-#include <linux/config.h> /* for CONFIG_SMP */
-
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.level          2.0w
 #else
 	.level		1.1
 #endif
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	.macro fixup_branch,lbl
 	b	    \lbl
 	.endm
@@ -103,7 +102,7 @@ linux_gateway_entry:
 	mfsp    %sr7,%r1                        /* save user sr7 */
 	mtsp    %r1,%sr3                        /* and store it in sr3 */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* for now we can *always* set the W bit on entry to the syscall
 	 * since we don't support wide userland processes.  We could
 	 * also save the current SM other than in r0 and restore it on
@@ -155,7 +154,7 @@ linux_gateway_entry:
 	STREG	%r19, TASK_PT_GR19(%r1)
 
 	LDREGM	-FRAME_SIZE(%r30), %r2		/* get users sp back */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u	%r2,63,1,%r19			/* W hidden in bottom bit */
 #if 0
 	xor	%r19,%r2,%r2			/* clear bottom bit */
@@ -186,7 +185,7 @@ linux_gateway_entry:
 
 	loadgp
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 	copy	%r19,%r2			/* W bit back to r2 */
 #else
@@ -205,7 +204,7 @@ linux_gateway_entry:
 	/* Note!  We cannot use the syscall table that is mapped
 	nearby since the gateway page is mapped execute-only. */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldil	L%sys_call_table, %r1
 	or,=	%r2,%r2,%r2
 	addil	L%(sys_call_table64-sys_call_table), %r1
@@ -321,7 +320,7 @@ tracesys_next:
 	LDREG   TASK_PT_GR25(%r1), %r25
 	LDREG   TASK_PT_GR24(%r1), %r24
 	LDREG   TASK_PT_GR23(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG   TASK_PT_GR22(%r1), %r22
 	LDREG   TASK_PT_GR21(%r1), %r21
 	ldo	-16(%r30),%r29			/* Reference param save area */
@@ -350,7 +349,7 @@ tracesys_next:
 tracesys_exit:
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	TI_TASK(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	bl	syscall_trace, %r2
@@ -371,7 +370,7 @@ tracesys_exit:
 tracesys_sigexit:
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	0(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	bl	syscall_trace, %r2
@@ -404,7 +403,7 @@ lws_start:
 	gate	.+8, %r0
 	depi	3, 31, 2, %r31	/* Ensure we return to userspace */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* FIXME: If we are a 64-bit kernel just
 	 *        turn this on unconditionally.
 	 */
@@ -440,7 +439,7 @@ lws_exit_nosys:
 	/* Fall through: Return to userspace */
 
 lws_exit:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* decide whether to reset the wide mode bit
 	 *
 	 * For a syscall, the W bit is stored in the lowest bit
@@ -486,7 +485,7 @@ lws_exit:
 
 	/* ELF64 Process entry path */
 lws_compare_and_swap64:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b,n	lws_compare_and_swap
 #else
 	/* If we are not a 64-bit kernel, then we don't
@@ -497,7 +496,7 @@ lws_compare_and_swap64:
 
 	/* ELF32 Process entry path */
 lws_compare_and_swap32:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Clip all the input registers */
 	depdi	0, 31, 32, %r26
 	depdi	0, 31, 32, %r25
@@ -608,7 +607,7 @@ cas_action:
 	   the other for the store. Either return -EFAULT.
 	   Each of the entries must be relocated. */
 	.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Pad the address calculation */
 	.word	0,(2b - linux_gateway_page)
 	.word	0,(3b - linux_gateway_page)
@@ -619,7 +618,7 @@ cas_action:
 	.previous
 
 	.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Pad the address calculation */
 	.word	0,(1b - linux_gateway_page)
 	.word	0,(3b - linux_gateway_page)
@@ -638,7 +637,7 @@ end_linux_gateway_page:
 
 	/* Relocate symbols assuming linux_gateway_page is mapped
 	   to virtual address 0x0 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* FIXME: The code will always be on the gateay page
 		  and thus it will be on the first 4k, the
 		  assembler seems to think that the final
@@ -666,7 +665,7 @@ lws_table:
 sys_call_table:
 #include "syscall_table.S"
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.align 4096
 	.export sys_call_table64
 .Lsys_call_table64:
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index dcfa4d3d0e7d..32cbc0489324 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -35,7 +35,7 @@
 #undef ENTRY_UHOH
 #undef ENTRY_COMP
 #undef ENTRY_OURS
-#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT)
+#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT)
 /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and
  * narrow palinux.  Use ENTRY_DIFF for those where a 32-bit specific
  * implementation is required on wide palinux.  Use ENTRY_COMP where
@@ -46,7 +46,7 @@
 #define ENTRY_UHOH(_name_) .dword sys32_##unimplemented
 #define ENTRY_OURS(_name_) .dword parisc_##_name_
 #define ENTRY_COMP(_name_) .dword compat_sys_##_name_
-#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT)
+#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT)
 #define ENTRY_SAME(_name_) .dword sys_##_name_
 #define ENTRY_DIFF(_name_) .dword sys_##_name_
 #define ENTRY_UHOH(_name_) .dword sys_##_name_
@@ -368,5 +368,11 @@
 	ENTRY_COMP(mbind)		/* 260 */
 	ENTRY_COMP(get_mempolicy)
 	ENTRY_COMP(set_mempolicy)
+	ENTRY_SAME(ni_syscall)	/* 263: reserved for vserver */
+	ENTRY_SAME(add_key)
+	ENTRY_SAME(request_key)		/* 265 */
+	ENTRY_SAME(keyctl)
+	ENTRY_SAME(ioprio_set)
+	ENTRY_SAME(ioprio_get)
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 7ff67f8e9f8c..bc979e1abdec 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -89,14 +89,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
     
-#ifdef CONFIG_CHASSIS_LCD_LED
-	/* Only schedule the led tasklet on cpu 0, and only if it
-	 * is enabled.
-	 */
-	if (cpu == 0 && !atomic_read(&led_tasklet.count))
-		tasklet_schedule(&led_tasklet);
-#endif
-
 	/* check soft power switch status */
 	if (cpu == 0 && !atomic_read(&power_tasklet.count))
 		tasklet_schedule(&power_tasklet);
@@ -104,6 +96,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	return IRQ_HANDLED;
 }
 
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (regs->gr[0] & PSW_N)
+		pc -= 4;
+
+#ifdef CONFIG_SMP
+	if (in_lock_functions(pc))
+		pc = regs->gr[2];
+#endif
+
+	return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+
 /*** converted from ia64 ***/
 /*
  * Return the number of micro-seconds that elapsed since the last
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index d2e5b229a2f4..15914f0235a0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs)
 	char *level;
 	unsigned long cr30;
 	unsigned long cr31;
-
+	/* carlos says that gcc understands better memory in a struct,
+	 * and it makes our life easier with fpregs -- T-Bone */
+	struct { u32 sw[2]; } s;
+	
 	level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
 
 	printk("%s\n", level); /* don't want to have that pretty register dump messed up */
@@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs)
 		printk("%s\n", buf);
 	}
 
-#if RIDICULOUSLY_VERBOSE
-	for (i = 0; i < 32; i += 2)
-		printk("%sFR%02d : %016lx  FR%2d : %016lx", level, i,
-				regs->fr[i], i+1, regs->fr[i+1]);
-#endif
+	/* FR are 64bit everywhere. Need to use asm to get the content
+	 * of fpsr/fper1, and we assume that we won't have a FP Identify
+	 * in our way, otherwise we're screwed.
+	 * The fldd is used to restore the T-bit if there was one, as the
+	 * store clears it anyway.
+	 * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */ 
+	__asm__ (
+		"fstd %%fr0,0(%1)	\n\t"
+		"fldd 0(%1),%%fr0	\n\t"
+		: "=m" (s) : "r" (&s) : "%r0"
+		);
+
+	printk("%s\n", level);
+	printk("%s      VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level);
+	printbinary(buf, s.sw[0], 32);
+	printk("%sFPSR: %s\n", level, buf);
+	printk("%sFPER1: %08x\n", level, s.sw[1]);
+
+	/* here we'll print fr0 again, tho it'll be meaningless */
+	for (i = 0; i < 32; i += 4) {
+		int j;
+		p = buf;
+		p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3);
+		for (j = 0; j < 4; j++)
+			p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]);
+		printk("%s\n", buf);
+	}
 
 	cr30 = mfctl(30);
 	cr31 = mfctl(31);
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 62eea35bcd69..eaae8a021f9f 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs)
 	register int flop=0;	/* true if this is a flop */
 
 	/* log a message with pacing */
-	if (user_mode(regs))
-	{
-		if (unaligned_count > 5 && jiffies - last_time > 5*HZ)
-		{
+	if (user_mode(regs)) {
+		if (current->thread.flags & PARISC_UAC_SIGBUS) {
+			goto force_sigbus;
+		}
+
+		if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
 			unaligned_count = 0;
 			last_time = jiffies;
 		}
-		if (++unaligned_count < 5)
-		{
+
+		if (!(current->thread.flags & PARISC_UAC_NOPRINT) 
+		    && ++unaligned_count < 5) {
 			char buf[256];
 			sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
 				current->comm, current->pid, regs->ior, regs->iaoq[0]);
@@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs)
 			show_regs(regs);
 #endif		
 		}
+
 		if (!unaligned_enabled)
 			goto force_sigbus;
 	}
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1b91612ed964..e0661c2978ed 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -35,7 +35,7 @@
 	extrd,u \t2,63,32,\t2
 #endif
 	/* t2 = &__per_cpu_offset[smp_processor_id()]; */
-	LDREG,s \t2(\t1),\t2 
+	LDREGX \t2(\t1),\t2 
 	addil LT%per_cpu__exception_data,%r27
 	LDREG RT%per_cpu__exception_data(%r1),\t1
 	/* t1 = &__get_cpu_var(exception_data) */
@@ -53,6 +53,8 @@
 	.endm
 #endif
 
+	.level LEVEL
+
 	.text
 	.section .fixup, "ax"
 
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index feb1b9f42c2b..b7098035321f 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
 	pds = (double *)pcs;
 	pdd = (double *)pcd;
 
+#if 0
 	/* Copy 8 doubles at a time */
 	while (len >= 8*sizeof(double)) {
 		register double r1, r2, r3, r4, r5, r6, r7, r8;
@@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
 		fstdma(d_space, r8, pdd, pmc_store_exc);
 		len -= 8*sizeof(double);
 	}
+#endif
 
 	pws = (unsigned int *)pds;
 	pwd = (unsigned int *)pdd;