Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
author: Linus Torvalds <torvalds@linux-foundation.org> 2012-03-27 16:41:24 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2012-03-27 16:41:24 -0700
commit: 34800598b2eebe061445216473b1e4c2ff5cba99 (patch)
tree: a6d0eb6fe45d9480888d7ddb34840e172ed80e56 /arch
parent: 46b407ca4a6149c8d27fcec1881d4f184bec7c77 (diff)
parent: 511f1cb6d426938fabf9c6d69ce4861b66ffd919 (diff)
97 files changed, 2510 insertions, 424 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c941fd06b2af..8ef416a3a551 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -760,7 +760,7 @@ config ARCH_SA1100
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b895a2a92da8..66ca8014ff3e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -180,12 +180,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX50 or i.MX53.
 
-	config DEBUG_IMX6Q_UART
-		bool "i.MX6Q Debug UART"
+	config DEBUG_IMX6Q_UART4
+		bool "i.MX6Q Debug UART4"
 		depends on SOC_IMX6Q
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q.
+		  on i.MX6Q UART4.
 
 	config DEBUG_MSM_UART1
 		bool "Kernel low-level debugging messages via MSM UART1"
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 80afa1b70b80..6e8447dc0202 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -10,19 +10,25 @@
 		reg = < 0x00000000 0x40000000 >;
 	};
 
+	pmc@7000f400 {
+		nvidia,invert-interrupt;
+	};
+
 	i2c@7000c000 {
 		clock-frequency = <400000>;
 
-		codec: wm8903@1a {
+		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
 			reg = <0x1a>;
-			interrupts = < 347 >;
+			interrupt-parent = <&gpio>;
+			interrupts = < 187 0x04 >;
 
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			/* 0x8000 = Not configured */
-			gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >;
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
 		};
 	};
 
@@ -38,13 +44,32 @@
 		clock-frequency = <400000>;
 	};
 
-	sound {
-		compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903";
+	i2s@70002a00 {
+		status = "disable";
+	};
 
-		spkr-en-gpios = <&codec 2 0>;
-		hp-det-gpios = <&gpio 178 0>;
-		int-mic-en-gpios = <&gpio 184 0>;
-		ext-mic-en-gpios = <&gpio 185 0>;
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-harmony",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Harmony";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
 	};
 
 	serial@70006000 {
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 61f385809970..fc97254c3644 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -12,6 +12,13 @@
 
 	i2c@7000c000 {
 		clock-frequency = <400000>;
+
+		alc5632: alc5632@1e {
+			compatible = "realtek,alc5632";
+			reg = <0x1e>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
 	};
 
 	i2c@7000c400 {
@@ -42,6 +49,29 @@
 		};
 	};
 
+	i2s@70002a00 {
+		status = "disable";
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-alc5632-paz00",
+			"nvidia,tegra-audio-alc5632";
+
+		nvidia,model = "Compal PAZ00";
+
+		nvidia,audio-routing =
+			"Int Spk", "SPKOUT",
+			"Int Spk", "SPKOUTN",
+			"Headset Mic", "MICBIAS1",
+			"MIC1", "Headset Mic",
+			"Headset Stereophone", "HPR",
+			"Headset Stereophone", "HPL";
+
+		nvidia,audio-codec = <&alc5632>;
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+
 	serial@70006000 {
 		clock-frequency = <216000000>;
 	};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index b55a02e34ba7..876d5c92ce36 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -13,6 +13,20 @@
 
 	i2c@7000c000 {
 		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = < 187 0x04 >;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+		};
 	};
 
 	i2c@7000c400 {
@@ -32,6 +46,32 @@
 		};
 	};
 
+	i2s@70002a00 {
+		status = "disable";
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-seaboard",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Seaboard";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1R", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+	};
+
 	serial@70006000 {
 		status = "disable";
 	};
@@ -93,4 +133,42 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	emc@7000f400 {
+		emc-table@190000 {
+			reg = < 190000 >;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 190000 >;
+			nvidia,emc-registers = < 0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000 >;
+		};
+
+		emc-table@380000 {
+			reg = < 380000 >;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 380000 >;
+			nvidia,emc-registers = < 0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000 >;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts
index 3b3ee7db99f3..252476867b54 100644
--- a/arch/arm/boot/dts/tegra-trimslice.dts
+++ b/arch/arm/boot/dts/tegra-trimslice.dts
@@ -26,6 +26,18 @@
 		status = "disable";
 	};
 
+	i2s@70002800 {
+		status = "disable";
+	};
+
+	i2s@70002a00 {
+		status = "disable";
+	};
+
+	das@70000c00 {
+		status = "disable";
+	};
+
 	serial@70006000 {
 		clock-frequency = < 216000000 >;
 	};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index c7d3b87f29df..2dcff8728e90 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -12,6 +12,20 @@
 
 	i2c@7000c000 {
 		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = < 187 0x04 >;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+		};
 	};
 
 	i2c@7000c400 {
@@ -26,6 +40,34 @@
 		clock-frequency = <400000>;
 	};
 
+	i2s@70002a00 {
+		status = "disable";
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-ventana",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Ventana";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+	};
+
 	serial@70006000 {
 		status = "disable";
 	};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 3da7afd45322..ec1f0101c79c 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,11 @@
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
+	pmc@7000f400 {
+		compatible = "nvidia,tegra20-pmc";
+		reg = <0x7000e400 0x400>;
+	};
+
 	intc: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
@@ -12,6 +17,27 @@
 		      < 0x50040100 0x0100 >;
 	};
 
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1200>;
+		interrupts = < 0 104 0x04
+			       0 105 0x04
+			       0 106 0x04
+			       0 107 0x04
+			       0 108 0x04
+			       0 109 0x04
+			       0 110 0x04
+			       0 111 0x04
+			       0 112 0x04
+			       0 113 0x04
+			       0 114 0x04
+			       0 115 0x04
+			       0 116 0x04
+			       0 117 0x04
+			       0 118 0x04
+			       0 119 0x04 >;
+	};
+
 	i2c@7000c000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -44,18 +70,18 @@
 		interrupts = < 0 53 0x04 >;
 	};
 
-	i2s@70002800 {
+	tegra_i2s1: i2s@70002800 {
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
 		interrupts = < 0 13 0x04 >;
-		dma-channel = < 2 >;
+		nvidia,dma-request-selector = < &apbdma 2 >;
 	};
 
-	i2s@70002a00 {
+	tegra_i2s2: i2s@70002a00 {
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002a00 0x200>;
 		interrupts = < 0 3 0x04 >;
-		dma-channel = < 1 >;
+		nvidia,dma-request-selector = < &apbdma 1 >;
 	};
 
 	das@70000c00 {
@@ -75,6 +101,8 @@
 			       0 89 0x04 >;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 	};
 
 	pinmux: pinmux@70000000 {
@@ -120,6 +148,13 @@
 		interrupts = < 0 91 0x04 >;
 	};
 
+	emc@7000f400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra20-emc";
+		reg = <0x7000f400 0x200>;
+	};
+
 	sdhci@c8000000 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000000 0x200>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index ee7db9892e02..ac4b75cb26c0 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,11 @@
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
+	pmc@7000f400 {
+		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+		reg = <0x7000e400 0x400>;
+	};
+
 	intc: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
@@ -12,6 +17,43 @@
 		      < 0x50040100 0x0100 >;
 	};
 
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = < 0 104 0x04
+			       0 105 0x04
+			       0 106 0x04
+			       0 107 0x04
+			       0 108 0x04
+			       0 109 0x04
+			       0 110 0x04
+			       0 111 0x04
+			       0 112 0x04
+			       0 113 0x04
+			       0 114 0x04
+			       0 115 0x04
+			       0 116 0x04
+			       0 117 0x04
+			       0 118 0x04
+			       0 119 0x04
+			       0 128 0x04
+			       0 129 0x04
+			       0 130 0x04
+			       0 131 0x04
+			       0 132 0x04
+			       0 133 0x04
+			       0 134 0x04
+			       0 135 0x04
+			       0 136 0x04
+			       0 137 0x04
+			       0 138 0x04
+			       0 139 0x04
+			       0 140 0x04
+			       0 141 0x04
+			       0 142 0x04
+			       0 143 0x04 >;
+	};
+
 	i2c@7000c000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -55,9 +97,18 @@
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
 		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >;
+		interrupts = < 0 32 0x04
+			       0 33 0x04
+			       0 34 0x04
+			       0 35 0x04
+			       0 55 0x04
+			       0 87 0x04
+			       0 89 0x04
+			       0 125 0x04 >;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 	};
 
 	serial@70006000 {
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index d88fb87b414d..b5ac644e12af 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -45,6 +45,7 @@ CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
+CONFIG_SMSC911X=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -79,6 +80,8 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
 CONFIG_DM9000=y
 CONFIG_SMC91X=y
 CONFIG_SMC911X=y
@@ -116,6 +119,21 @@ CONFIG_FB_IMX=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_MEDIA=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_VIDEO_MX2_HOSTSUPPORT=y
+CONFIG_VIDEO_MX2=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3cd606905178..dc6f6411bbf5 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -81,6 +81,8 @@ CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@@ -125,7 +127,39 @@ CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_MX3_VIDEO=y
+CONFIG_VIDEO_MX3=y
+CONFIG_FB=y
+CONFIG_FB_MX3=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 443675d317e6..a691ef4c6008 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -101,7 +101,7 @@ CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
 CONFIG_REGULATOR=y
-CONFIG_REGULATOR_BQ24022=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_FB=y
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 366a7765635b..70709ab0102a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -891,7 +891,8 @@ static struct platform_device at91sam9263_isi_device = {
 	.num_resources	= ARRAY_SIZE(isi_resources),
 };
 
-void __init at91_add_device_isi(void)
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck)
 {
 	at91_set_A_periph(AT91_PIN_PE0, 0);	/* ISI_D0 */
 	at91_set_A_periph(AT91_PIN_PE1, 0);	/* ISI_D1 */
@@ -904,14 +905,20 @@ void __init at91_add_device_isi(void)
 	at91_set_A_periph(AT91_PIN_PE8, 0);	/* ISI_PCK */
 	at91_set_A_periph(AT91_PIN_PE9, 0);	/* ISI_HSYNC */
 	at91_set_A_periph(AT91_PIN_PE10, 0);	/* ISI_VSYNC */
-	at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
 	at91_set_B_periph(AT91_PIN_PE12, 0);	/* ISI_PD8 */
 	at91_set_B_periph(AT91_PIN_PE13, 0);	/* ISI_PD9 */
 	at91_set_B_periph(AT91_PIN_PE14, 0);	/* ISI_PD10 */
 	at91_set_B_periph(AT91_PIN_PE15, 0);	/* ISI_PD11 */
+
+	if (use_pck_as_mck) {
+		at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
+
+		/* TODO: register the PCK for ISI_MCK and set its parent */
+	}
 }
 #else
-void __init at91_add_device_isi(void) {}
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 96e2adcd5a84..bd4e68cd3e2f 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -14,6 +14,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>
@@ -28,7 +29,10 @@
 #include <mach/at_hdmac.h>
 #include <mach/atmel-mci.h>
 
+#include <media/atmel-isi.h>
+
 #include "generic.h"
+#include "clock.h"
 
 
 /* --------------------------------------------------------------------
@@ -870,6 +874,96 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Image Sensor Interface
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
+static u64 isi_dmamask = DMA_BIT_MASK(32);
+static struct isi_platform_data isi_data;
+
+struct resource isi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_ISI,
+		.end	= AT91SAM9G45_BASE_ISI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_ISI,
+		.end	= AT91SAM9G45_ID_ISI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_isi_device = {
+	.name		= "atmel_isi",
+	.id		= 0,
+	.dev		= {
+			.dma_mask		= &isi_dmamask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+			.platform_data		= &isi_data,
+	},
+	.resource	= isi_resources,
+	.num_resources	= ARRAY_SIZE(isi_resources),
+};
+
+static struct clk_lookup isi_mck_lookups[] = {
+	CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
+};
+
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck)
+{
+	struct clk *pck;
+	struct clk *parent;
+
+	if (!data)
+		return;
+	isi_data = *data;
+
+	at91_set_A_periph(AT91_PIN_PB20, 0);	/* ISI_D0 */
+	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ISI_D1 */
+	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ISI_D2 */
+	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ISI_D3 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ISI_D4 */
+	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ISI_D5 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ISI_D6 */
+	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ISI_D7 */
+	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ISI_PCK */
+	at91_set_A_periph(AT91_PIN_PB30, 0);	/* ISI_HSYNC */
+	at91_set_A_periph(AT91_PIN_PB29, 0);	/* ISI_VSYNC */
+	at91_set_B_periph(AT91_PIN_PB8, 0);	/* ISI_PD8 */
+	at91_set_B_periph(AT91_PIN_PB9, 0);	/* ISI_PD9 */
+	at91_set_B_periph(AT91_PIN_PB10, 0);	/* ISI_PD10 */
+	at91_set_B_periph(AT91_PIN_PB11, 0);	/* ISI_PD11 */
+
+	platform_device_register(&at91sam9g45_isi_device);
+
+	if (use_pck_as_mck) {
+		at91_set_B_periph(AT91_PIN_PB31, 0);	/* ISI_MCK (PCK1) */
+
+		pck = clk_get(NULL, "pck1");
+		parent = clk_get(NULL, "plla");
+
+		BUG_ON(IS_ERR(pck) || IS_ERR(parent));
+
+		if (clk_set_parent(pck, parent)) {
+			pr_err("Failed to set PCK's parent\n");
+		} else {
+			/* Register PCK as ISI_MCK */
+			isi_mck_lookups[0].clk = pck;
+			clkdev_add_table(isi_mck_lookups,
+					ARRAY_SIZE(isi_mck_lookups));
+		}
+
+		clk_put(pck);
+		clk_put(parent);
+	}
+}
+#else
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck) {}
+#endif
+
 
 /* --------------------------------------------------------------------
  *  LCD Controller
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index eec02cd57ced..1815152001f7 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-at91/board-flexibity.c
  *
- *  Copyright (C) 2010 Flexibity
+ *  Copyright (C) 2010-2011 Flexibity
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
  *
@@ -62,6 +62,13 @@ static struct at91_udc_data __initdata flexibity_udc_data = {
 	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
 };
 
+/* I2C devices */
+static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1307", 0x68),
+	},
+};
+
 /* SPI devices */
 static struct spi_board_info flexibity_spi_devices[] = {
 	{	/* DataFlash chip */
@@ -141,6 +148,9 @@ static void __init flexibity_board_init(void)
 	at91_add_device_usbh(&flexibity_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&flexibity_udc_data);
+	/* I2C */
+	at91_add_device_i2c(flexibity_i2c_devices,
+		ARRAY_SIZE(flexibity_i2c_devices));
 	/* SPI */
 	at91_add_device_spi(flexibity_spi_devices,
 		ARRAY_SIZE(flexibity_spi_devices));
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ea0d1b9c2b7b..57497e2b8878 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,11 +24,13 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/leds.h>
-#include <linux/clk.h>
 #include <linux/atmel-mci.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
+#include <media/soc_camera.h>
+#include <media/atmel-isi.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -185,6 +187,71 @@ static void __init ek_add_device_nand(void)
 
 
 /*
+ *  ISI
+ */
+static struct isi_platform_data __initdata isi_data = {
+	.frate			= ISI_CFG1_FRATE_CAPTURE_ALL,
+	/* to use codec and preview path simultaneously */
+	.full_mode		= 1,
+	.data_width_flags	= ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
+	/* ISI_MCK is provided by programmable clock or external clock */
+	.mck_hz			= 25000000,
+};
+
+
+/*
+ * soc-camera OV2640
+ */
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
+{
+	/* ISI board for ek using default 8-bits connection */
+	return SOCAM_DATAWIDTH_8;
+}
+
+static int i2c_camera_power(struct device *dev, int on)
+{
+	/* enable or disable the camera */
+	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+	at91_set_gpio_output(AT91_PIN_PD13, !on);
+
+	if (!on)
+		goto out;
+
+	/* If enabled, give a reset impulse */
+	at91_set_gpio_output(AT91_PIN_PD12, 0);
+	msleep(20);
+	at91_set_gpio_output(AT91_PIN_PD12, 1);
+	msleep(100);
+
+out:
+	return 0;
+}
+
+static struct i2c_board_info i2c_camera = {
+	I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+	.bus_id			= 0,
+	.board_info		= &i2c_camera,
+	.i2c_adapter_id		= 0,
+	.power			= i2c_camera_power,
+	.query_bus_param	= isi_camera_query_bus_param,
+};
+
+static struct platform_device isi_ov2640 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_ov2640,
+	},
+};
+#endif
+
+
+/*
  * LCD Controller
  */
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
@@ -377,7 +444,12 @@ static struct gpio_led ek_pwm_led[] = {
 #endif
 };
 
-
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+	&isi_ov2640,
+#endif
+};
 
 static void __init ek_board_init(void)
 {
@@ -399,6 +471,8 @@ static void __init ek_board_init(void)
 	ek_add_device_nand();
 	/* I2C */
 	at91_add_device_i2c(0, NULL, 0);
+	/* ISI, using programmable clock as ISI_MCK */
+	at91_add_device_isi(&isi_data, true);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen */
@@ -410,6 +484,8 @@ static void __init ek_board_init(void)
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+	/* Other platform devices */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 3b33f07b1e11..dc8d6d4f17cf 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -107,6 +107,8 @@ struct atmel_nand_data {
 	u8		ale;		/* address line number connected to ALE */
 	u8		cle;		/* address line number connected to CLE */
 	u8		bus_width_16;	/* buswidth is 16 bit */
+	u8		correction_cap; /* PMECC correction capability */
+	u16		sector_size;    /* Sector size for PMECC */
 	struct mtd_partition *parts;
 	unsigned int	num_parts;
 };
@@ -179,7 +181,9 @@ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
 extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 
  /* ISI */
-extern void __init at91_add_device_isi(void);
+struct isi_platform_data;
+extern void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck);
 
  /* Touchscreen Controller */
 struct at91_tsadcc_data {
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 98997c2da262..2bf7d6e23989 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -42,6 +42,7 @@ config SOC_EXYNOS4212
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
+	select SAMSUNG_DMADEV
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	help
@@ -51,6 +52,7 @@ config SOC_EXYNOS4412
 	bool "SAMSUNG EXYNOS4412"
 	default y
 	depends on ARCH_EXYNOS4
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4412 SoC support
 
@@ -335,6 +337,7 @@ config MACH_SMDK4212
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index 060dde7d7ad6..200159dcb341 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -789,6 +789,13 @@ static struct clk exynos4_clk_pdma1 = {
 	.ctrlbit	= (1 << 1),
 };
 
+static struct clk exynos4_clk_mdma1 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.2",
+	.enable		= exynos4_clk_ip_image_ctrl,
+	.ctrlbit	= ((1 << 8) | (1 << 5) | (1 << 2)),
+};
+
 struct clk *exynos4_clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
@@ -1307,6 +1314,7 @@ static struct clksrc_clk *exynos4_sysclks[] = {
 static struct clk *exynos4_clk_cdev[] = {
 	&exynos4_clk_pdma0,
 	&exynos4_clk_pdma1,
+	&exynos4_clk_mdma1,
 };
 
 static struct clksrc_clk *exynos4_clksrc_cdev[] = {
@@ -1335,6 +1343,7 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
+	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
 	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
 	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
 	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 25f3ef2c36e5..13607c4328b3 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -29,6 +29,7 @@
 #include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
+#include <plat/cpu.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
@@ -36,7 +37,7 @@
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static u8 pdma0_peri[] = {
+static u8 exynos4210_pdma0_peri[] = {
 	DMACH_PCM0_RX,
 	DMACH_PCM0_TX,
 	DMACH_PCM2_RX,
@@ -69,15 +70,47 @@ static u8 pdma0_peri[] = {
 	DMACH_AC97_PCMOUT,
 };
 
-static struct dma_pl330_platdata exynos4_pdma0_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri_id = pdma0_peri,
+static u8 exynos4212_pdma0_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
+	DMACH_MIPI_HSI0,
+	DMACH_MIPI_HSI1,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_MIPI_HSI4,
+	DMACH_MIPI_HSI5,
 };
 
+struct dma_pl330_platdata exynos4_pdma0_pdata;
+
 static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
 	EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata);
 
-static u8 pdma1_peri[] = {
+static u8 exynos4210_pdma1_peri[] = {
 	DMACH_PCM0_RX,
 	DMACH_PCM0_TX,
 	DMACH_PCM1_RX,
@@ -105,19 +138,84 @@ static u8 pdma1_peri[] = {
 	DMACH_SLIMBUS5_TX,
 };
 
-static struct dma_pl330_platdata exynos4_pdma1_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri_id = pdma1_peri,
+static u8 exynos4212_pdma1_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_MIPI_HSI2,
+	DMACH_MIPI_HSI3,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_SPDIF,
+	DMACH_MIPI_HSI6,
+	DMACH_MIPI_HSI7,
 };
 
+static struct dma_pl330_platdata exynos4_pdma1_pdata;
+
 static AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330,
 	EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata);
 
+static u8 mdma_peri[] = {
+	DMACH_MTOM_0,
+	DMACH_MTOM_1,
+	DMACH_MTOM_2,
+	DMACH_MTOM_3,
+	DMACH_MTOM_4,
+	DMACH_MTOM_5,
+	DMACH_MTOM_6,
+	DMACH_MTOM_7,
+};
+
+static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(mdma_peri),
+	.peri_id = mdma_peri,
+};
+
+static AMBA_AHB_DEVICE(exynos4_mdma1,  "dma-pl330.2", 0x00041330,
+	EXYNOS4_PA_MDMA1, {IRQ_MDMA1}, &exynos4_mdma1_pdata);
+
 static int __init exynos4_dma_init(void)
 {
 	if (of_have_populated_dt())
 		return 0;
 
+	if (soc_is_exynos4210()) {
+		exynos4_pdma0_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos4210_pdma0_peri);
+		exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+		exynos4_pdma1_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos4210_pdma1_peri);
+		exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		exynos4_pdma0_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos4212_pdma0_peri);
+		exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+		exynos4_pdma1_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos4212_pdma1_peri);
+		exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+	}
+
 	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
 	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
@@ -126,6 +224,9 @@ static int __init exynos4_dma_init(void)
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
 	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
 
+	dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
+	amba_device_register(&exynos4_mdma1_device, &iomem_resource);
+
 	return 0;
 }
 arch_initcall(exynos4_dma_init);
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index f77bce04789a..1d401c957835 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -43,6 +43,8 @@
 #define IRQ_EINT15		IRQ_SPI(31)
 #define IRQ_EINT16_31		IRQ_SPI(32)
 
+#define IRQ_MDMA0		IRQ_SPI(33)
+#define IRQ_MDMA1		IRQ_SPI(34)
 #define IRQ_PDMA0		IRQ_SPI(35)
 #define IRQ_PDMA1		IRQ_SPI(36)
 #define IRQ_TIMER0_VIC		IRQ_SPI(37)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index a8cd65fcc685..609127df9b02 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -72,7 +72,8 @@
 #define EXYNOS4_PA_TWD			0x10500600
 #define EXYNOS4_PA_L2CC			0x10502000
 
-#define EXYNOS4_PA_MDMA			0x10810000
+#define EXYNOS4_PA_MDMA0		0x10810000
+#define EXYNOS4_PA_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 191f5c675fe1..82ea6fccfb34 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -117,7 +117,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 };
 
 static struct regulator_consumer_supply emmc_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
 	REGULATOR_SUPPLY("vmmc", "dw_mmc"),
 };
 
@@ -418,7 +418,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
 	REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
+	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
 	REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 0b944eb66ebd..28658da9f423 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -752,7 +752,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 };
 
 static struct regulator_consumer_supply mmc0_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
 };
 
 static struct regulator_init_data mmc0_fixed_voltage_init_data = {
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 37a5d715a6c2..feeebde71deb 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -298,6 +298,7 @@ config MACH_MX27_3DS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MX2_CAMERA
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 2d88f8b9a454..111c328f5420 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -329,6 +329,12 @@
 #define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
 #define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
 
+#define BP_CCOSR_CKO1_EN		7
+#define BP_CCOSR_CKO1_PODF		4
+#define BM_CCOSR_CKO1_PODF		(0x7 << 4)
+#define BP_CCOSR_CKO1_SEL		0
+#define BM_CCOSR_CKO1_SEL		(0xf << 0)
+
 #define FREQ_480M	480000000
 #define FREQ_528M	528000000
 #define FREQ_594M	594000000
@@ -393,6 +399,7 @@ static struct clk ipu1_di1_clk;
 static struct clk ipu2_di0_clk;
 static struct clk ipu2_di1_clk;
 static struct clk enfc_clk;
+static struct clk cko1_clk;
 static struct clk dummy_clk = {};
 
 static unsigned long external_high_reference;
@@ -938,6 +945,24 @@ static void _clk_disable(struct clk *clk)
 	writel_relaxed(reg, clk->enable_reg);
 }
 
+static int _clk_enable_1b(struct clk *clk)
+{
+	u32 reg;
+	reg = readl_relaxed(clk->enable_reg);
+	reg |= 0x1 << clk->enable_shift;
+	writel_relaxed(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable_1b(struct clk *clk)
+{
+	u32 reg;
+	reg = readl_relaxed(clk->enable_reg);
+	reg &= ~(0x1 << clk->enable_shift);
+	writel_relaxed(reg, clk->enable_reg);
+}
+
 struct divider {
 	struct clk *clk;
 	void __iomem *reg;
@@ -983,6 +1008,7 @@ DEF_CLK_DIV1(ipu2_di0_pre_div,	&ipu2_di0_pre_clk,	CSCDR2,	IPU2_DI0_PRE);
 DEF_CLK_DIV1(ipu2_di1_pre_div,	&ipu2_di1_pre_clk,	CSCDR2,	IPU2_DI1_PRE);
 DEF_CLK_DIV1(ipu1_div,		&ipu1_clk,		CSCDR3,	IPU1_HSP);
 DEF_CLK_DIV1(ipu2_div,		&ipu2_clk,		CSCDR3,	IPU2_HSP);
+DEF_CLK_DIV1(cko1_div,		&cko1_clk,		CCOSR, CKO1);
 
 #define DEF_CLK_DIV2(d, c, r, b)				\
 	static struct divider d = {				\
@@ -1038,6 +1064,7 @@ static struct divider *dividers[] = {
 	&enfc_div,
 	&spdif_div,
 	&asrc_serial_div,
+	&cko1_div,
 };
 
 static unsigned long ldb_di_clk_get_rate(struct clk *clk)
@@ -1625,6 +1652,32 @@ DEF_IPU_DI_MUX(CSCDR2, 2, 1);
 DEF_IPU_MUX(1);
 DEF_IPU_MUX(2);
 
+static struct multiplexer cko1_mux = {
+	.clk = &cko1_clk,
+	.reg = CCOSR,
+	.bp = BP_CCOSR_CKO1_SEL,
+	.bm = BM_CCOSR_CKO1_SEL,
+	.parents = {
+		&pll3_usb_otg,
+		&pll2_bus,
+		&pll1_sys,
+		&pll5_video,
+		&dummy_clk,
+		&axi_clk,
+		&enfc_clk,
+		&ipu1_di0_clk,
+		&ipu1_di1_clk,
+		&ipu2_di0_clk,
+		&ipu2_di1_clk,
+		&ahb_clk,
+		&ipg_clk,
+		&ipg_perclk,
+		&ckil_clk,
+		&pll4_audio,
+		NULL
+	},
+};
+
 static struct multiplexer *multiplexers[] = {
 	&axi_mux,
 	&periph_mux,
@@ -1667,6 +1720,7 @@ static struct multiplexer *multiplexers[] = {
 	&ipu2_di1_mux,
 	&ipu1_mux,
 	&ipu2_mux,
+	&cko1_mux,
 };
 
 static int _clk_set_parent(struct clk *clk, struct clk *parent)
@@ -1690,7 +1744,7 @@ static int _clk_set_parent(struct clk *clk, struct clk *parent)
 			break;
 		i++;
 	}
-	if (!m->parents[i])
+	if (!m->parents[i] || m->parents[i] == &dummy_clk)
 		return -EINVAL;
 
 	val = readl_relaxed(m->reg);
@@ -1745,6 +1799,20 @@ DEF_NG_CLK(asrc_serial_clk,	&pll3_usb_otg);
 		.secondary	= s,			\
 	}
 
+#define DEF_CLK_1B(name, er, es, p, s)			\
+	static struct clk name = {			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.enable		= _clk_enable_1b,	\
+		.disable	= _clk_disable_1b,	\
+		.get_rate	= _clk_get_rate,	\
+		.set_rate	= _clk_set_rate,	\
+		.round_rate	= _clk_round_rate,	\
+		.set_parent	= _clk_set_parent,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
 DEF_CLK(aips_tz1_clk,	  CCGR0, CG0,  &ahb_clk,	  NULL);
 DEF_CLK(aips_tz2_clk,	  CCGR0, CG1,  &ahb_clk,	  NULL);
 DEF_CLK(apbh_dma_clk,	  CCGR0, CG2,  &ahb_clk,	  NULL);
@@ -1811,6 +1879,7 @@ DEF_CLK(usdhc4_clk,	  CCGR6, CG4,  &pll2_pfd_400m,	  NULL);
 DEF_CLK(emi_slow_clk,	  CCGR6, CG5,  &axi_clk,	  NULL);
 DEF_CLK(vdo_axi_clk,	  CCGR6, CG6,  &axi_clk,	  NULL);
 DEF_CLK(vpu_clk,	  CCGR6, CG7,  &axi_clk,	  NULL);
+DEF_CLK_1B(cko1_clk,	  CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL);
 
 static int pcie_clk_enable(struct clk *clk)
 {
@@ -1922,6 +1991,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
 	_REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
 	_REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+	_REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk),
 };
 
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
@@ -2029,6 +2099,8 @@ int __init mx6q_clocks_init(void)
 	clk_set_rate(&usdhc3_clk, 49500000);
 	clk_set_rate(&usdhc4_clk, 49500000);
 
+	clk_set_parent(&cko1_clk, &ahb_clk);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index d4ab6f29a766..0213f8dcee81 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,7 +17,7 @@
 #include <mach/hardware.h>
 
 static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART
+#ifdef CONFIG_DEBUG_IMX6Q_UART4
 	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
 	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
 	.length		= MX6Q_UART4_SIZE,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 8d9f95514b1f..e432d4acee1f 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -37,8 +37,8 @@
 #define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
 		(MX21ADS_MMIO_BASE_ADDR + (offset))
 
+#define MX21ADS_CS8900A_MMIO_SIZE   0x200000
 #define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
 #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
 #define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
 #define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
@@ -159,6 +159,18 @@ static struct platform_device mx21ads_nor_mtd_device = {
 	.resource = &mx21ads_flash_resource,
 };
 
+static const struct resource mx21ads_cs8900_resources[] __initconst = {
+	DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
+	DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
+};
+
+static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
+	.name = "cs89x0",
+	.id = 0,
+	.res = mx21ads_cs8900_resources,
+	.num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
+};
+
 static const struct imxuart_platform_data uart_pdata_rts __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -292,6 +304,8 @@ static void __init mx21ads_board_init(void)
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	platform_device_register_full(
+			(struct platform_device_info *)&mx21ads_cs8900_devinfo);
 }
 
 static void __init mx21ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 18f35816706a..c6d385c52257 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -31,6 +31,8 @@
 #include <linux/regulator/machine.h>
 #include <linux/spi/l4f00242t03.h>
 
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -52,6 +54,8 @@
 #define SD1_CD			IMX_GPIO_NR(2, 26)
 #define LCD_RESET		IMX_GPIO_NR(1, 3)
 #define LCD_ENABLE		IMX_GPIO_NR(1, 31)
+#define CSI_PWRDWN		IMX_GPIO_NR(4, 19)
+#define CSI_RESET		IMX_GPIO_NR(3, 6)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -141,6 +145,26 @@ static const int mx27pdk_pins[] __initconst = {
 	PA30_PF_CONTRAST,
 	LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
 	LCD_RESET | GPIO_GPIO | GPIO_OUT,
+	/* CSI */
+	PB10_PF_CSI_D0,
+	PB11_PF_CSI_D1,
+	PB12_PF_CSI_D2,
+	PB13_PF_CSI_D3,
+	PB14_PF_CSI_D4,
+	PB15_PF_CSI_MCLK,
+	PB16_PF_CSI_PIXCLK,
+	PB17_PF_CSI_D5,
+	PB18_PF_CSI_D6,
+	PB19_PF_CSI_D7,
+	PB20_PF_CSI_VSYNC,
+	PB21_PF_CSI_HSYNC,
+	CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
+	CSI_RESET | GPIO_GPIO | GPIO_OUT,
+};
+
+static struct gpio mx27_3ds_camera_gpios[] = {
+	{ CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
+	{ CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -242,6 +266,7 @@ static struct regulator_init_data gpo_init = {
 
 static struct regulator_consumer_supply vmmc1_consumers[] = {
 	REGULATOR_SUPPLY("vcore", "spi0.0"),
+	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
 };
 
 static struct regulator_init_data vmmc1_init = {
@@ -270,6 +295,22 @@ static struct regulator_init_data vgen_init = {
 	.consumer_supplies = vgen_consumers,
 };
 
+static struct regulator_consumer_supply vvib_consumers[] = {
+	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vvib_init = {
+	.constraints = {
+		.min_uV = 1300000,
+		.max_uV = 1300000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
+	.consumer_supplies = vvib_consumers,
+};
+
 static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_VMMC1,
@@ -283,6 +324,9 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
 		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REG_VVIB,  /* Power OV2640 */
+		.init_data = &vvib_init,
 	},
 };
 
@@ -311,6 +355,51 @@ static const struct spi_imx_master spi2_pdata __initconst = {
 	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
 };
 
+static int mx27_3ds_camera_power(struct device *dev, int on)
+{
+	/* enable or disable the camera */
+	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+	gpio_set_value(CSI_PWRDWN, on ? 0 : 1);
+
+	if (!on)
+		goto out;
+
+	/* If enabled, give a reset impulse */
+	gpio_set_value(CSI_RESET, 0);
+	msleep(20);
+	gpio_set_value(CSI_RESET, 1);
+	msleep(100);
+
+out:
+	return 0;
+}
+
+static struct i2c_board_info mx27_3ds_i2c_camera = {
+	I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx27_3ds_camera_regs[] = {
+	{ .supply = "cmos_vcore" },
+	{ .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+	.bus_id		= 0,
+	.board_info	= &mx27_3ds_i2c_camera,
+	.i2c_adapter_id	= 0,
+	.power		= mx27_3ds_camera_power,
+	.regulators	= mx27_3ds_camera_regs,
+	.num_regulators	= ARRAY_SIZE(mx27_3ds_camera_regs),
+};
+
+static struct platform_device mx27_3ds_ov2640 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_ov2640,
+	},
+};
+
 static struct imx_fb_videomode mx27_3ds_modes[] = {
 	{	/* 480x640 @ 60 Hz */
 		.mode = {
@@ -367,12 +456,21 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 	},
 };
 
+static struct platform_device *devices[] __initdata = {
+	&mx27_3ds_ov2640,
+};
+
+static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
+	.clk = 26000000,
+};
+
 static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
 static void __init mx27pdk_init(void)
 {
+	int ret;
 	imx27_soc_init();
 
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
@@ -404,7 +502,17 @@ static void __init mx27pdk_init(void)
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
 	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+	ret = gpio_request_array(mx27_3ds_camera_gpios,
+				 ARRAY_SIZE(mx27_3ds_camera_gpios));
+	if (ret) {
+		pr_err("Failed to request camera gpios");
+		iclink_ov2640.power = NULL;
+	}
+
+	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
 }
 
 static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4917aab0e253..4518e5448227 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -28,7 +28,6 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31ads.h>
 #include <mach/iomux-mx3.h>
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -39,6 +38,9 @@
 
 #include "devices-imx31.h"
 
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS	MX31_CS4_BASE_ADDR_VIRT
+
 /* PBC Board interrupt status register */
 #define PBC_INTSTATUS           0x000016
 
@@ -62,6 +64,7 @@
 #define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
 
+#define MXC_EXP_IO_BASE		MXC_BOARD_IRQ_START
 #define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
 
 #define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
@@ -69,6 +72,10 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
+/* CS8900 */
+#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
+#define CS4_CS8900_MMIO_START	0x20000
+
 /*
  * The serial port definition structure.
  */
@@ -101,11 +108,29 @@ static struct platform_device serial_device = {
 	},
 };
 
+static const struct resource mx31ads_cs8900_resources[] __initconst = {
+	DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
+	DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
+};
+
+static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
+	.name = "cs89x0",
+	.id = 0,
+	.res = mx31ads_cs8900_resources,
+	.num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
+};
+
 static int __init mxc_init_extuart(void)
 {
 	return platform_device_register(&serial_device);
 }
 
+static void __init mxc_init_ext_ethernet(void)
+{
+	platform_device_register_full(
+		(struct platform_device_info *)&mx31ads_cs8900_devinfo);
+}
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -492,12 +517,15 @@ static void __init mxc_init_audio(void)
 	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 }
 
-/* static mappings */
+/*
+ * Static mappings, starting from the CS4 start address up to the start address
+ * of the CS8900.
+ */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
 		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length		= MX31_CS4_SIZE / 2,
+		.length		= CS4_CS8900_MMIO_START,
 		.type		= MT_DEVICE
 	},
 };
@@ -522,6 +550,7 @@ static void __init mx31ads_init(void)
 	mxc_init_imx_uart();
 	mxc_init_i2c();
 	mxc_init_audio();
+	mxc_init_ext_ethernet();
 }
 
 static void __init mx31ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index c0511fb1a5f9..f17a15f28316 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -507,7 +507,7 @@ static void mx31moboard_poweroff(void)
 	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
 
 	if (!IS_ERR(clk))
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
 
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 6dc093448057..e26a9cb05ed8 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -89,7 +89,7 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 
 static int mx5_suspend_prepare(void)
 {
-	return clk_enable(gpc_dvfs_clk);
+	return clk_prepare_enable(gpc_dvfs_clk);
 }
 
 static int mx5_suspend_enter(suspend_state_t state)
@@ -119,7 +119,7 @@ static int mx5_suspend_enter(suspend_state_t state)
 
 static void mx5_suspend_finish(void)
 {
-	clk_disable(gpc_dvfs_clk);
+	clk_disable_unprepare(gpc_dvfs_clk);
 }
 
 static int mx5_pm_valid(suspend_state_t state)
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 0e01bf44479c..f55c772d1816 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -721,6 +721,41 @@ static struct clk clk_tsc = {
 	.get_rate	= local_return_parent_rate,
 };
 
+static int adc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+	u32 divider;
+
+	/* Use PERIPH_CLOCK */
+	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+	tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+	/*
+	 * Set clock divider so that we have equal to or less than
+	 * 4.5MHz clock at ADC
+	 */
+	divider = clk->get_rate(clk) / 4500000 + 1;
+	tmp |= divider;
+	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+	/* synchronize rate of this clock w/ actual HW setting */
+	clk->rate = clk->get_rate(clk->parent) / divider;
+
+	if (enable == 0)
+		__raw_writel(0, clk->enable_reg);
+	else
+		__raw_writel(clk->enable_mask, clk->enable_reg);
+
+	return 0;
+}
+
+static struct clk clk_adc = {
+	.parent		= &clk_pclk,
+	.enable		= adc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
 static int mmc_onoff_enable(struct clk *clk, int enable)
 {
 	u32 tmp;
@@ -1055,6 +1090,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
 	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
 	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+	_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
 	_REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
 	_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
 	_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 369b152896cd..6c76bb36559b 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -138,6 +138,28 @@ struct platform_device lpc32xx_rtc_device = {
 };
 
 /*
+ * ADC support
+ */
+static struct resource adc_resources[] = {
+	{
+		.start = LPC32XX_ADC_BASE,
+		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_LPC32XX_TS_IRQ,
+		.end = IRQ_LPC32XX_TS_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device lpc32xx_adc_device = {
+	.name =  "lpc32xx-adc",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(adc_resources),
+	.resource = adc_resources,
+};
+
+/*
  * Returns the unique ID for the device
  */
 void lpc32xx_get_uid(u32 devid[4])
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 75640bfb097f..68f2e46d98ad 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -29,6 +29,7 @@ extern struct platform_device lpc32xx_i2c0_device;
 extern struct platform_device lpc32xx_i2c1_device;
 extern struct platform_device lpc32xx_i2c2_device;
 extern struct platform_device lpc32xx_tsc_device;
+extern struct platform_device lpc32xx_adc_device;
 extern struct platform_device lpc32xx_rtc_device;
 
 /*
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 8571d6250dc1..0d79a3f8a5e0 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -254,6 +254,7 @@ static struct platform_device *phy3250_devs[] __initdata = {
 	&lpc32xx_i2c2_device,
 	&lpc32xx_watchdog_device,
 	&lpc32xx_gpio_led_device,
+	&lpc32xx_adc_device,
 };
 
 static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 4de13abef7bb..e2e1f1e5e124 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -22,6 +22,7 @@ extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
 
 extern struct platform_device pxa910_device_gpio;
+extern struct platform_device pxa910_device_rtc;
 
 static inline int pxa910_add_uart(int id)
 {
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 1a96585336ba..8a37fb003655 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -57,6 +57,7 @@
 #define APBC_PXA910_SSP1	APBC_REG(0x01c)
 #define APBC_PXA910_SSP2	APBC_REG(0x020)
 #define APBC_PXA910_IPC		APBC_REG(0x024)
+#define APBC_PXA910_RTC		APBC_REG(0x028)
 #define APBC_PXA910_TWSI0	APBC_REG(0x02c)
 #define APBC_PXA910_KPC		APBC_REG(0x030)
 #define APBC_PXA910_TIMERS	APBC_REG(0x034)
diff --git a/arch/arm/mach-mmp/include/mach/regs-rtc.h b/arch/arm/mach-mmp/include/mach/regs-rtc.h
new file mode 100644
index 000000000000..5bff886a3941
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-rtc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/addr-map.h>
+
+#define RTC_VIRT_BASE	(APB_VIRT_BASE + 0x10000)
+#define RTC_REG(x)	(*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x))))
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		RTC_REG(0x00)	/* RTC Count Register */
+#define RTAR		RTC_REG(0x04)	/* RTC Alarm Register */
+#define RTSR		RTC_REG(0x08)	/* RTC Status Register */
+#define RTTR		RTC_REG(0x0C)	/* RTC Timer Trim Register */
+
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 0c87e69adf9f..43f8bcc29b67 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -92,6 +92,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
+static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(u2o, USB, 0x1b, 480000000);
@@ -109,6 +110,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -184,3 +186,28 @@ struct platform_device pxa910_device_gpio = {
 	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
 	.resource	= pxa910_resource_gpio,
 };
+
+static struct resource pxa910_resource_rtc[] = {
+	{
+		.start	= 0xd4010000,
+		.end	= 0xd401003f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PXA910_RTC_INT,
+		.end	= IRQ_PXA910_RTC_INT,
+		.name	= "rtc 1Hz",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_PXA910_RTC_ALARM,
+		.end	= IRQ_PXA910_RTC_ALARM,
+		.name	= "rtc alarm",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa910_device_rtc = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa910_resource_rtc),
+	.resource	= pxa910_resource_rtc,
+};
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 5ac5d5832e45..e72c709da44f 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -124,6 +124,7 @@ static struct platform_device ttc_dkb_device_onenand = {
 
 static struct platform_device *ttc_dkb_devices[] = {
 	&pxa910_device_gpio,
+	&pxa910_device_rtc,
 	&ttc_dkb_device_onenand,
 };
 
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index 293958beb505..e3ac52c34019 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -439,6 +439,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
 	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
 	_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
+	_REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
 };
 
 static int clk_misc_init(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 22ad12f6e4de..cea29c99e214 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -617,6 +617,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("duart", NULL, uart_clk)
 	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
+	_REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk)
 	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
 	_REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
 	_REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 3fa651d2c994..4d1329d59287 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst;
 #define mx23_add_auart0()		mx23_add_auart(0)
 #define mx23_add_auart1()		mx23_add_auart(1)
 
+extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
+#define mx23_add_gpmi_nand(pdata)	\
+	mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
+
 extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
 #define mx23_add_mxs_mmc(id, pdata) \
 	mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 4f50094e293d..9dbeae130842 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -34,6 +34,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
 #define mx28_add_flexcan0(pdata)	mx28_add_flexcan(0, pdata)
 #define mx28_add_flexcan1(pdata)	mx28_add_flexcan(1, pdata)
 
+extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
+#define mx28_add_gpmi_nand(pdata)	\
+	mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
+
 extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
 #define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
 
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 18b6bf526a27..b8913df4cfa2 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -12,6 +12,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN
 	select HAVE_CAN_FLEXCAN if CAN
 	bool
 
+config MXS_HAVE_PLATFORM_GPMI_NAND
+	bool
+
 config MXS_HAVE_PLATFORM_MXS_I2C
 	bool
 
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index f52e3e53baec..c8f5c9541a30 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
 obj-y += platform-dma.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
new file mode 100644
index 000000000000..3e22df5944a8
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+#include <linux/dma-mapping.h>
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
+	.devid = "imx23-gpmi-nand",
+	.res = {
+		/* GPMI */
+		DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
+					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
+		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
+					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
+		/* BCH */
+		DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
+					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
+		DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
+					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
+		/* DMA */
+		DEFINE_RES_NAMED(MX23_DMA_GPMI0,
+					MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
+					GPMI_NAND_DMA_CHANNELS_RES_NAME,
+					IORESOURCE_DMA),
+		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
+					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
+	},
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
+	.devid = "imx28-gpmi-nand",
+	.res = {
+		/* GPMI */
+		DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
+					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
+		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
+					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
+		/* BCH */
+		DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
+					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
+		DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
+					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
+		/* DMA */
+		DEFINE_RES_NAMED(MX28_DMA_GPMI0,
+					MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
+					GPMI_NAND_DMA_CHANNELS_RES_NAME,
+					IORESOURCE_DMA),
+		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
+					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
+	},
+};
+#endif
+
+struct platform_device *__init
+mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
+		const struct mxs_gpmi_nand_data *data)
+{
+	return mxs_add_platform_device_dmamask(data->devid, -1,
+				data->res, GPMI_NAND_RES_SIZE,
+				pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index dc369c1239fc..f2e383955d88 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -66,6 +66,16 @@ struct platform_device *__init mxs_add_flexcan(
 		const struct mxs_flexcan_data *data,
 		const struct flexcan_platform_data *pdata);
 
+/* gpmi-nand */
+#include <linux/mtd/gpmi-nand.h>
+struct mxs_gpmi_nand_data {
+	const char *devid;
+	const struct resource res[GPMI_NAND_RES_SIZE];
+};
+struct platform_device *__init
+mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
+		const struct mxs_gpmi_nand_data *data);
+
 /* i2c */
 struct mxs_mxs_i2c_data {
 	int id;
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 3c8dd928628e..34b9766d1d23 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -29,6 +29,7 @@
 
 #include "omap_hwmod_common_data.h"
 
+#include "smartreflex.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
 #include "wd_timer.h"
@@ -376,6 +377,16 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
+	{ .irq = 18},
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
+	{ .irq = 19},
+	{ .irq = -1 }
+};
+
 /* L4 CORE -> SR1 interface */
 static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
 	{
@@ -2664,6 +2675,10 @@ static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
 };
 
 /* SR1 */
+static struct omap_smartreflex_dev_attr sr1_dev_attr = {
+	.sensor_voltdm_name   = "mpu_iva",
+};
+
 static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
 	&omap3_l4_core__sr1,
 };
@@ -2672,7 +2687,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 	.name		= "sr1_hwmod",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
-	.vdd_name	= "mpu_iva",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2684,6 +2698,8 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 	},
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.dev_attr	= &sr1_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2691,7 +2707,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 	.name		= "sr1_hwmod",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
-	.vdd_name	= "mpu_iva",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2703,9 +2718,15 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 	},
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.dev_attr	= &sr1_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 };
 
 /* SR2 */
+static struct omap_smartreflex_dev_attr sr2_dev_attr = {
+	.sensor_voltdm_name	= "core",
+};
+
 static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
 	&omap3_l4_core__sr2,
 };
@@ -2714,7 +2735,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 	.name		= "sr2_hwmod",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
-	.vdd_name	= "core",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2726,6 +2746,8 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 	},
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.dev_attr	= &sr2_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_core_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2733,7 +2755,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 	.name		= "sr2_hwmod",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
-	.vdd_name	= "core",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2745,6 +2766,8 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 	},
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.dev_attr	= &sr2_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_core_irqs,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index acb561ea7c11..08daa5e0eb5f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -33,6 +33,7 @@
 
 #include "omap_hwmod_common_data.h"
 
+#include "smartreflex.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "prm44xx.h"
@@ -3962,6 +3963,10 @@ static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
 };
 
 /* smartreflex_core */
+static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
+	.sensor_voltdm_name   = "core",
+};
+
 static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
 	{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
@@ -3998,7 +4003,6 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
 	.mpu_irqs	= omap44xx_smartreflex_core_irqs,
 
 	.main_clk	= "smartreflex_core_fck",
-	.vdd_name	= "core",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
@@ -4008,9 +4012,14 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
 	},
 	.slaves		= omap44xx_smartreflex_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
+	.dev_attr	= &smartreflex_core_dev_attr,
 };
 
 /* smartreflex_iva */
+static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
+	.sensor_voltdm_name	= "iva",
+};
+
 static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
 	{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
@@ -4046,7 +4055,6 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
 	.clkdm_name	= "l4_ao_clkdm",
 	.mpu_irqs	= omap44xx_smartreflex_iva_irqs,
 	.main_clk	= "smartreflex_iva_fck",
-	.vdd_name	= "iva",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
@@ -4056,9 +4064,14 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
 	},
 	.slaves		= omap44xx_smartreflex_iva_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
+	.dev_attr	= &smartreflex_iva_dev_attr,
 };
 
 /* smartreflex_mpu */
+static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
+	.sensor_voltdm_name	= "mpu",
+};
+
 static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
 	{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
@@ -4094,7 +4107,6 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
 	.clkdm_name	= "l4_ao_clkdm",
 	.mpu_irqs	= omap44xx_smartreflex_mpu_irqs,
 	.main_clk	= "smartreflex_mpu_fck",
-	.vdd_name	= "mpu",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
@@ -4104,6 +4116,7 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
 	},
 	.slaves		= omap44xx_smartreflex_mpu_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
+	.dev_attr	= &smartreflex_mpu_dev_attr,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index 53d9d0a5b39d..955566eefac4 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -29,6 +29,7 @@ static int sr_class3_enable(struct voltagedomain *voltdm)
 
 static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
 {
+	sr_disable_errgen(voltdm);
 	omap_vp_disable(voltdm);
 	sr_disable(voltdm);
 	if (is_volt_reset)
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 47c77a1d932a..008fbd7b9352 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -36,6 +36,12 @@
 #define SR_DISABLE_TIMEOUT	200
 
 struct omap_sr {
+	struct list_head		node;
+	struct platform_device		*pdev;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+	struct dentry			*dbg_dir;
+	unsigned int			irq;
 	int				srid;
 	int				ip_type;
 	int				nvalue_count;
@@ -49,13 +55,7 @@ struct omap_sr {
 	u32				senp_avgweight;
 	u32				senp_mod;
 	u32				senn_mod;
-	unsigned int			irq;
 	void __iomem			*base;
-	struct platform_device		*pdev;
-	struct list_head		node;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-	struct dentry			*dbg_dir;
 };
 
 /* sr_list contains all the instances of smartreflex module */
@@ -74,10 +74,6 @@ static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
 					u32 value)
 {
 	u32 reg_val;
-	u32 errconfig_offs = 0, errconfig_mask = 0;
-
-	reg_val = __raw_readl(sr->base + offset);
-	reg_val &= ~mask;
 
 	/*
 	 * Smartreflex error config register is special as it contains
@@ -88,16 +84,15 @@ static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
 	 * if they are currently set, but does allow the caller to write
 	 * those bits.
 	 */
-	if (sr->ip_type == SR_TYPE_V1) {
-		errconfig_offs = ERRCONFIG_V1;
-		errconfig_mask = ERRCONFIG_STATUS_V1_MASK;
-	} else if (sr->ip_type == SR_TYPE_V2) {
-		errconfig_offs = ERRCONFIG_V2;
-		errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2;
-	}
+	if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
+		mask |= ERRCONFIG_STATUS_V1_MASK;
+	else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
+		mask |= ERRCONFIG_VPBOUNDINTST_V2;
+
+	reg_val = __raw_readl(sr->base + offset);
+	reg_val &= ~mask;
 
-	if (offset == errconfig_offs)
-		reg_val &= ~errconfig_mask;
+	value &= mask;
 
 	reg_val |= value;
 
@@ -128,21 +123,28 @@ static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
 
 static irqreturn_t sr_interrupt(int irq, void *data)
 {
-	struct omap_sr *sr_info = (struct omap_sr *)data;
+	struct omap_sr *sr_info = data;
 	u32 status = 0;
 
-	if (sr_info->ip_type == SR_TYPE_V1) {
+	switch (sr_info->ip_type) {
+	case SR_TYPE_V1:
 		/* Read the status bits */
 		status = sr_read_reg(sr_info, ERRCONFIG_V1);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, ERRCONFIG_V1, status);
-	} else if (sr_info->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		/* Read the status bits */
 		status = sr_read_reg(sr_info, IRQSTATUS);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, IRQSTATUS, status);
+		break;
+	default:
+		dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
+			sr_info->ip_type);
+		return IRQ_NONE;
 	}
 
 	if (sr_class->notify)
@@ -166,6 +168,7 @@ static void sr_set_clk_length(struct omap_sr *sr)
 			__func__);
 		return;
 	}
+
 	sys_clk_speed = clk_get_rate(sys_ck);
 	clk_put(sys_ck);
 
@@ -267,7 +270,7 @@ static int sr_late_init(struct omap_sr *sr_info)
 			goto error;
 		}
 		ret = request_irq(sr_info->irq, sr_interrupt,
-				0, name, (void *)sr_info);
+				0, name, sr_info);
 		if (ret)
 			goto error;
 		disable_irq(sr_info->irq);
@@ -288,12 +291,15 @@ error:
 		"not function as desired\n", __func__);
 	kfree(name);
 	kfree(sr_info);
+
 	return ret;
 }
 
 static void sr_v1_disable(struct omap_sr *sr)
 {
 	int timeout = 0;
+	int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
+			ERRCONFIG_MCUBOUNDINTST;
 
 	/* Enable MCUDisableAcknowledge interrupt */
 	sr_modify_reg(sr, ERRCONFIG_V1,
@@ -302,13 +308,13 @@ static void sr_v1_disable(struct omap_sr *sr)
 	/* SRCONFIG - disable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
 
-	/* Disable all other SR interrupts and clear the status */
+	/* Disable all other SR interrupts and clear the status as needed */
+	if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
+		errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
 	sr_modify_reg(sr, ERRCONFIG_V1,
 			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
 			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
-			(ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
-			ERRCONFIG_MCUBOUNDINTST |
-			ERRCONFIG_VPBOUNDINTST_V1));
+			errconf_val);
 
 	/*
 	 * Wait for SR to be disabled.
@@ -337,9 +343,17 @@ static void sr_v2_disable(struct omap_sr *sr)
 	/* SRCONFIG - disable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
 
-	/* Disable all other SR interrupts and clear the status */
-	sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+	/*
+	 * Disable all other SR interrupts and clear the status
+	 * write to status register ONLY on need basis - only if status
+	 * is set.
+	 */
+	if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
+		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
 			ERRCONFIG_VPBOUNDINTST_V2);
+	else
+		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+				0x0);
 	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
 			IRQENABLE_MCUVALIDINT |
 			IRQENABLE_MCUBOUNDSINT));
@@ -398,15 +412,16 @@ static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
  */
 int sr_configure_errgen(struct voltagedomain *voltdm)
 {
-	u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en;
-	u32 vpboundint_st, senp_en = 0, senn_en = 0;
+	u32 sr_config, sr_errconfig, errconfig_offs;
+	u32 vpboundint_en, vpboundint_st;
+	u32 senp_en = 0, senn_en = 0;
 	u8 senp_shift, senn_shift;
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
 		pr_warning("%s: omap_sr struct for sr_%s not found\n",
 			__func__, voltdm->name);
-		return -EINVAL;
+		return PTR_ERR(sr);
 	}
 
 	if (!sr->clk_length)
@@ -418,20 +433,23 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
 	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
 		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
 
-	if (sr->ip_type == SR_TYPE_V1) {
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
 		sr_config |= SRCONFIG_DELAYCTRL;
 		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
 		errconfig_offs = ERRCONFIG_V1;
 		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
 		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-	} else if (sr->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
 		errconfig_offs = ERRCONFIG_V2;
 		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
 		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-	} else {
+		break;
+	default:
 		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
 			"module without specifying the ip\n", __func__);
 		return -EINVAL;
@@ -447,8 +465,55 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
 		sr_errconfig);
 
 	/* Enabling the interrupts if the ERROR module is used */
-	sr_modify_reg(sr, errconfig_offs,
-		vpboundint_en, (vpboundint_en | vpboundint_st));
+	sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
+		      vpboundint_en);
+
+	return 0;
+}
+
+/**
+ * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable the error generator module inside the smartreflex module.
+ *
+ * Returns 0 on success and error value in case of failure.
+ */
+int sr_disable_errgen(struct voltagedomain *voltdm)
+{
+	u32 errconfig_offs;
+	u32 vpboundint_en, vpboundint_st;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return PTR_ERR(sr);
+	}
+
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
+		errconfig_offs = ERRCONFIG_V1;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+		break;
+	case SR_TYPE_V2:
+		errconfig_offs = ERRCONFIG_V2;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Disable the interrupts of ERROR module */
+	sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
+
+	/* Disable the Sensor and errorgen */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
 
 	return 0;
 }
@@ -475,7 +540,7 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
 	if (IS_ERR(sr)) {
 		pr_warning("%s: omap_sr struct for sr_%s not found\n",
 			__func__, voltdm->name);
-		return -EINVAL;
+		return PTR_ERR(sr);
 	}
 
 	if (!sr->clk_length)
@@ -488,14 +553,17 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
 		SRCONFIG_SENENABLE |
 		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
 
-	if (sr->ip_type == SR_TYPE_V1) {
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
 		sr_config |= SRCONFIG_DELAYCTRL;
 		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-	} else if (sr->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-	} else {
+		break;
+	default:
 		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
 			"module without specifying the ip\n", __func__);
 		return -EINVAL;
@@ -511,20 +579,27 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
 	 * Enabling the interrupts if MINMAXAVG module is used.
 	 * TODO: check if all the interrupts are mandatory
 	 */
-	if (sr->ip_type == SR_TYPE_V1) {
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
 		sr_modify_reg(sr, ERRCONFIG_V1,
 			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
 			ERRCONFIG_MCUBOUNDINTEN),
 			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
 			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
 			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
-	} else if (sr->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		sr_write_reg(sr, IRQSTATUS,
 			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
 			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
 		sr_write_reg(sr, IRQENABLE_SET,
 			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
 			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
 	}
 
 	return 0;
@@ -543,15 +618,15 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
  */
 int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 {
-	u32 nvalue_reciprocal;
 	struct omap_volt_data *volt_data;
 	struct omap_sr *sr = _sr_lookup(voltdm);
+	u32 nvalue_reciprocal;
 	int ret;
 
 	if (IS_ERR(sr)) {
 		pr_warning("%s: omap_sr struct for sr_%s not found\n",
 			__func__, voltdm->name);
-		return -EINVAL;
+		return PTR_ERR(sr);
 	}
 
 	volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
@@ -559,7 +634,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 	if (IS_ERR(volt_data)) {
 		dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
 			"for nominal voltage %ld\n", __func__, volt);
-		return -ENODATA;
+		return PTR_ERR(volt_data);
 	}
 
 	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
@@ -617,10 +692,17 @@ void sr_disable(struct voltagedomain *voltdm)
 	 * disable the clocks.
 	 */
 	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
-		if (sr->ip_type == SR_TYPE_V1)
+		switch (sr->ip_type) {
+		case SR_TYPE_V1:
 			sr_v1_disable(sr);
-		else if (sr->ip_type == SR_TYPE_V2)
+			break;
+		case SR_TYPE_V2:
 			sr_v2_disable(sr);
+			break;
+		default:
+			dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
+				sr->ip_type);
+		}
 	}
 
 	pm_runtime_put_sync_suspend(&sr->pdev->dev);
@@ -779,10 +861,10 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
 	sr_pmic_data = pmic_data;
 }
 
-/* PM Debug Fs enteries to enable disable smartreflex. */
+/* PM Debug FS entries to enable and disable smartreflex. */
 static int omap_sr_autocomp_show(void *data, u64 *val)
 {
-	struct omap_sr *sr_info = (struct omap_sr *) data;
+	struct omap_sr *sr_info = data;
 
 	if (!sr_info) {
 		pr_warning("%s: omap_sr struct not found\n", __func__);
@@ -796,7 +878,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
 
 static int omap_sr_autocomp_store(void *data, u64 val)
 {
-	struct omap_sr *sr_info = (struct omap_sr *) data;
+	struct omap_sr *sr_info = data;
 
 	if (!sr_info) {
 		pr_warning("%s: omap_sr struct not found\n", __func__);
@@ -804,7 +886,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
 	}
 
 	/* Sanity check */
-	if (val && (val != 1)) {
+	if (val > 1) {
 		pr_warning("%s: Invalid argument %lld\n", __func__, val);
 		return -EINVAL;
 	}
@@ -821,11 +903,11 @@ static int omap_sr_autocomp_store(void *data, u64 val)
 }
 
 DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
-		omap_sr_autocomp_store, "%llu\n");
+			omap_sr_autocomp_store, "%llu\n");
 
 static int __init omap_sr_probe(struct platform_device *pdev)
 {
-	struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
+	struct omap_sr *sr_info;
 	struct omap_sr_data *pdata = pdev->dev.platform_data;
 	struct resource *mem, *irq;
 	struct dentry *nvalue_dir;
@@ -833,12 +915,15 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	int i, ret = 0;
 	char *name;
 
+	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
 	if (!sr_info) {
 		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
 			__func__);
 		return -ENOMEM;
 	}
 
+	platform_set_drvdata(pdev, sr_info);
+
 	if (!pdata) {
 		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
 		ret = -EINVAL;
@@ -904,7 +989,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
 	if (!sr_dbg_dir) {
 		sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
-		if (!sr_dbg_dir) {
+		if (IS_ERR_OR_NULL(sr_dbg_dir)) {
 			ret = PTR_ERR(sr_dbg_dir);
 			pr_err("%s:sr debugfs dir creation failed(%d)\n",
 				__func__, ret);
@@ -921,7 +1006,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	}
 	sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
 	kfree(name);
-	if (IS_ERR(sr_info->dbg_dir)) {
+	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
 		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
 			__func__);
 		ret = PTR_ERR(sr_info->dbg_dir);
@@ -938,7 +1023,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 			&sr_info->err_minlimit);
 
 	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
-	if (IS_ERR(nvalue_dir)) {
+	if (IS_ERR_OR_NULL(nvalue_dir)) {
 		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
 			"for n-values\n", __func__);
 		ret = PTR_ERR(nvalue_dir);
@@ -994,7 +1079,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 	if (IS_ERR(sr_info)) {
 		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
 			__func__);
-		return -EINVAL;
+		return PTR_ERR(sr_info);
 	}
 
 	if (sr_info->autocomp_active)
@@ -1011,8 +1096,32 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void __devexit omap_sr_shutdown(struct platform_device *pdev)
+{
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct omap_sr *sr_info;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return;
+	}
+
+	sr_info = _sr_lookup(pdata->voltdm);
+	if (IS_ERR(sr_info)) {
+		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+			__func__);
+		return;
+	}
+
+	if (sr_info->autocomp_active)
+		sr_stop_vddautocomp(sr_info);
+
+	return;
+}
+
 static struct platform_driver smartreflex_driver = {
 	.remove         = __devexit_p(omap_sr_remove),
+	.shutdown	= __devexit_p(omap_sr_shutdown),
 	.driver		= {
 		.name	= "smartreflex",
 	},
@@ -1042,12 +1151,12 @@ static int __init sr_init(void)
 
 	return 0;
 }
+late_initcall(sr_init);
 
 static void __exit sr_exit(void)
 {
 	platform_driver_unregister(&smartreflex_driver);
 }
-late_initcall(sr_init);
 module_exit(sr_exit);
 
 MODULE_DESCRIPTION("OMAP Smartreflex Driver");
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
index 5f35b9e25556..5809141171f8 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -152,6 +152,15 @@ struct omap_sr_pmic_data {
 	void (*sr_pmic_init) (void);
 };
 
+/**
+ * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
+ *
+ * @sensor_voltdm_name:       Name of voltdomain of SR instance
+ */
+struct omap_smartreflex_dev_attr {
+	const char      *sensor_voltdm_name;
+};
+
 #ifdef CONFIG_OMAP_SMARTREFLEX
 /*
  * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
@@ -231,6 +240,7 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
 int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
 void sr_disable(struct voltagedomain *voltdm);
 int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_disable_errgen(struct voltagedomain *voltdm);
 int sr_configure_minmax(struct voltagedomain *voltdm);
 
 /* API to register the smartreflex class driver with the smartreflex driver */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 78c9437913ce..a503e1e8358c 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -74,6 +74,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 	struct omap_sr_data *sr_data;
 	struct platform_device *pdev;
 	struct omap_volt_data *volt_data;
+	struct omap_smartreflex_dev_attr *sr_dev_attr;
 	char *name = "smartreflex";
 	static int i;
 
@@ -84,9 +85,11 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		return -ENOMEM;
 	}
 
-	if (!oh->vdd_name) {
+	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
+	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
 		pr_err("%s: No voltage domain specified for %s."
-			"Cannot initialize\n", __func__, oh->name);
+				"Cannot initialize\n", __func__,
+					oh->name);
 		goto exit;
 	}
 
@@ -94,10 +97,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 	sr_data->senn_mod = 0x1;
 	sr_data->senp_mod = 0x1;
 
-	sr_data->voltdm = voltdm_lookup(oh->vdd_name);
+	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
 	if (IS_ERR(sr_data->voltdm)) {
 		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
-			__func__, oh->vdd_name);
+			__func__, sr_dev_attr->sensor_voltdm_name);
 		goto exit;
 	}
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 5bc13121eac5..84f2d7015cfe 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -406,20 +406,17 @@ static struct resource pxa_rtc_resources[] = {
 	[1] = {
 		.start  = IRQ_RTC1Hz,
 		.end    = IRQ_RTC1Hz,
+		.name	= "rtc 1Hz",
 		.flags  = IORESOURCE_IRQ,
 	},
 	[2] = {
 		.start  = IRQ_RTCAlrm,
 		.end    = IRQ_RTCAlrm,
+		.name	= "rtc alarm",
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device sa1100_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-};
-
 struct platform_device pxa_device_rtc = {
 	.name		= "pxa-rtc",
 	.id		= -1,
@@ -427,6 +424,27 @@ struct platform_device pxa_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };
 
+static struct resource sa1100_rtc_resources[] = {
+	{
+		.start  = IRQ_RTC1Hz,
+		.end    = IRQ_RTC1Hz,
+		.name	= "rtc 1Hz",
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.start  = IRQ_RTCAlrm,
+		.end    = IRQ_RTCAlrm,
+		.name	= "rtc alarm",
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device sa1100_device_rtc = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
+	.resource	= sa1100_rtc_resources,
+};
+
 static struct resource pxa_ac97_resources[] = {
 	[0] = {
 		.start  = 0x40500000,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index f309bf975202..3fa929d4a4f5 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -28,7 +28,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
-#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max1586.h>
 #include <linux/spi/ads7846.h>
@@ -698,14 +699,34 @@ static struct regulator_init_data bq24022_init_data = {
 	.consumer_supplies      = bq24022_consumers,
 };
 
-static struct bq24022_mach_info bq24022_info = {
-	.gpio_nce   = GPIO72_HX4700_BQ24022_nCHARGE_EN,
-	.gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
-	.init_data  = &bq24022_init_data,
+static struct gpio bq24022_gpios[] = {
+	{ GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
+};
+
+static struct gpio_regulator_state bq24022_states[] = {
+	{ .value = 100000, .gpios = (0 << 0) },
+	{ .value = 500000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config bq24022_info = {
+	.supply_name = "bq24022",
+
+	.enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+	.enable_high = 0,
+	.enabled_at_boot = 0,
+
+	.gpios = bq24022_gpios,
+	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
+
+	.states = bq24022_states,
+	.nr_states = ARRAY_SIZE(bq24022_states),
+
+	.type = REGULATOR_CURRENT,
+	.init_data = &bq24022_init_data,
 };
 
 static struct platform_device bq24022 = {
-	.name = "bq24022",
+	.name = "gpio-regulator",
 	.id   = -1,
 	.dev  = {
 		.platform_data = &bq24022_info,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 3d6baf91396c..5e26f3e93fdd 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,7 +25,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
-#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -596,14 +597,34 @@ static struct regulator_init_data bq24022_init_data = {
 	.consumer_supplies      = bq24022_consumers,
 };
 
-static struct bq24022_mach_info bq24022_info = {
-	.gpio_nce   = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-	.gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2,
-	.init_data  = &bq24022_init_data,
+static struct gpio bq24022_gpios[] = {
+	{ EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
+};
+
+static struct gpio_regulator_state bq24022_states[] = {
+	{ .value = 100000, .gpios = (0 << 0) },
+	{ .value = 500000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config bq24022_info = {
+	.supply_name = "bq24022",
+
+	.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+	.enable_high = 0,
+	.enabled_at_boot = 0,
+
+	.gpios = bq24022_gpios,
+	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
+
+	.states = bq24022_states,
+	.nr_states = ARRAY_SIZE(bq24022_states),
+
+	.type = REGULATOR_CURRENT,
+	.init_data = &bq24022_init_data,
 };
 
 static struct platform_device bq24022 = {
-	.name = "bq24022",
+	.name = "gpio-regulator",
 	.id   = -1,
 	.dev  = {
 		.platform_data = &bq24022_info,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 3918a672238e..1570d457fea3 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -89,6 +89,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
 	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 5ce434b95e87..47601f80e6e7 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -231,6 +231,7 @@ static struct clk_lookup pxa95x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
 	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
 	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 void __init pxa95x_init_irq(void)
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 08bb0355159d..0e9a71c90ed7 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -59,6 +59,7 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
+#include <plat/rtc-core.h>
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -98,6 +99,7 @@ int __init s3c2416_init(void)
 	s3c_fb_setname("s3c2443-fb");
 
 	s3c_adc_setname("s3c2416-adc");
+	s3c_rtc_setname("s3c2416-rtc");
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index b9deaeb0dfff..b7778a9dafaf 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -41,6 +41,7 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
+#include <plat/rtc-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -73,6 +74,7 @@ int __init s3c2443_init(void)
 	s3c_fb_setname("s3c2443-fb");
 
 	s3c_adc_setname("s3c2443-adc");
+	s3c_rtc_setname("s3c2443-rtc");
 
 	/* change WDT IRQ number */
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index dab3c6347a8f..172ebd0ee0a2 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,17 +11,29 @@
 #include <linux/clk.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 
-/*
- * Very simple clock implementation - we only have one clock to deal with.
- */
+struct clkops {
+	void			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+};
+
 struct clk {
+	const struct clkops	*ops;
 	unsigned int		enabled;
 };
 
-static void clk_gpio27_enable(void)
+#define DEFINE_CLK(_name, _ops)				\
+struct clk clk_##_name = {				\
+		.ops	= _ops,				\
+	}
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void clk_gpio27_enable(struct clk *clk)
 {
 	/*
 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
@@ -32,38 +44,24 @@ static void clk_gpio27_enable(void)
 	TUCR = TUCR_3_6864MHz;
 }
 
-static void clk_gpio27_disable(void)
+static void clk_gpio27_disable(struct clk *clk)
 {
 	TUCR = 0;
 	GPDR &= ~GPIO_32_768kHz;
 	GAFR &= ~GPIO_32_768kHz;
 }
 
-static struct clk clk_gpio27;
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	const char *devname = dev_name(dev);
-
-	return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk_gpio27_enable();
-	spin_unlock_irqrestore(&clocks_lock, flags);
+	if (clk) {
+		spin_lock_irqsave(&clocks_lock, flags);
+		if (clk->enabled++ == 0)
+			clk->ops->enable(clk);
+		spin_unlock_irqrestore(&clocks_lock, flags);
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
@@ -72,17 +70,31 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk_gpio27_disable();
-	spin_unlock_irqrestore(&clocks_lock, flags);
+	if (clk) {
+		WARN_ON(clk->enabled == 0);
+		spin_lock_irqsave(&clocks_lock, flags);
+		if (--clk->enabled == 0)
+			clk->ops->disable(clk);
+		spin_unlock_irqrestore(&clocks_lock, flags);
+	}
 }
 EXPORT_SYMBOL(clk_disable);
 
-unsigned long clk_get_rate(struct clk *clk)
+const struct clkops clk_gpio27_ops = {
+	.enable		= clk_gpio27_enable,
+	.disable	= clk_gpio27_disable,
+};
+
+static DEFINE_CLK(gpio27, &clk_gpio27_ops);
+
+static struct clk_lookup sa11xx_clkregs[] = {
+	CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
+	CLKDEV_INIT("sa1100-rtc", NULL, NULL),
+};
+
+static int __init sa11xx_clk_init(void)
 {
-	return 3686400;
+	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
+	return 0;
 }
-EXPORT_SYMBOL(clk_get_rate);
+core_initcall(sa11xx_clk_init);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index bb10ee2cb89f..7c1ebf4a7920 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -345,9 +345,17 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
+static struct resource sa1100_rtc_resources[] = {
+	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
+	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
+};
+
 static struct platform_device sa11x0rtc_device = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
+	.resource	= sa1100_rtc_resources,
 };
 
 static struct platform_device *sa11x0_devices[] __initdata = {
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 76a79b8a1721..1dd2726986cf 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -7,6 +7,7 @@ obj-y                                   += clock.o
 obj-y                                   += timer.o
 obj-y                                   += pinmux.o
 obj-y					+= fuse.o
+obj-y					+= pmc.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_CPU_IDLE)			+= sleep.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= powergate.o
@@ -18,7 +19,7 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
+obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o apbio.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
new file mode 100644
index 000000000000..e75451e517bd
--- /dev/null
+++ b/arch/arm/mach-tegra/apbio.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2010 NVIDIA Corporation.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+
+#include <mach/dma.h>
+#include <mach/iomap.h>
+
+#include "apbio.h"
+
+static DEFINE_MUTEX(tegra_apb_dma_lock);
+
+static struct tegra_dma_channel *tegra_apb_dma;
+static u32 *tegra_apb_bb;
+static dma_addr_t tegra_apb_bb_phys;
+static DECLARE_COMPLETION(tegra_apb_wait);
+
+bool tegra_apb_init(void)
+{
+	struct tegra_dma_channel *ch;
+
+	mutex_lock(&tegra_apb_dma_lock);
+
+	/* Check to see if we raced to setup */
+	if (tegra_apb_dma)
+		goto out;
+
+	ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT |
+		TEGRA_DMA_SHARED);
+
+	if (!ch)
+		goto out_fail;
+
+	tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
+		&tegra_apb_bb_phys, GFP_KERNEL);
+	if (!tegra_apb_bb) {
+		pr_err("%s: can not allocate bounce buffer\n", __func__);
+		tegra_dma_free_channel(ch);
+		goto out_fail;
+	}
+
+	tegra_apb_dma = ch;
+out:
+	mutex_unlock(&tegra_apb_dma_lock);
+	return true;
+
+out_fail:
+	mutex_unlock(&tegra_apb_dma_lock);
+	return false;
+}
+
+static void apb_dma_complete(struct tegra_dma_req *req)
+{
+	complete(&tegra_apb_wait);
+}
+
+u32 tegra_apb_readl(unsigned long offset)
+{
+	struct tegra_dma_req req;
+	int ret;
+
+	if (!tegra_apb_dma && !tegra_apb_init())
+		return readl(IO_TO_VIRT(offset));
+
+	mutex_lock(&tegra_apb_dma_lock);
+	req.complete = apb_dma_complete;
+	req.to_memory = 1;
+	req.dest_addr = tegra_apb_bb_phys;
+	req.dest_bus_width = 32;
+	req.dest_wrap = 1;
+	req.source_addr = offset;
+	req.source_bus_width = 32;
+	req.source_wrap = 4;
+	req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
+	req.size = 4;
+
+	INIT_COMPLETION(tegra_apb_wait);
+
+	tegra_dma_enqueue_req(tegra_apb_dma, &req);
+
+	ret = wait_for_completion_timeout(&tegra_apb_wait,
+		msecs_to_jiffies(50));
+
+	if (WARN(ret == 0, "apb read dma timed out")) {
+		tegra_dma_dequeue_req(tegra_apb_dma, &req);
+		*(u32 *)tegra_apb_bb = 0;
+	}
+
+	mutex_unlock(&tegra_apb_dma_lock);
+	return *((u32 *)tegra_apb_bb);
+}
+
+void tegra_apb_writel(u32 value, unsigned long offset)
+{
+	struct tegra_dma_req req;
+	int ret;
+
+	if (!tegra_apb_dma && !tegra_apb_init()) {
+		writel(value, IO_TO_VIRT(offset));
+		return;
+	}
+
+	mutex_lock(&tegra_apb_dma_lock);
+	*((u32 *)tegra_apb_bb) = value;
+	req.complete = apb_dma_complete;
+	req.to_memory = 0;
+	req.dest_addr = offset;
+	req.dest_wrap = 4;
+	req.dest_bus_width = 32;
+	req.source_addr = tegra_apb_bb_phys;
+	req.source_bus_width = 32;
+	req.source_wrap = 1;
+	req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
+	req.size = 4;
+
+	INIT_COMPLETION(tegra_apb_wait);
+
+	tegra_dma_enqueue_req(tegra_apb_dma, &req);
+
+	ret = wait_for_completion_timeout(&tegra_apb_wait,
+		msecs_to_jiffies(50));
+
+	if (WARN(ret == 0, "apb write dma timed out"))
+		tegra_dma_dequeue_req(tegra_apb_dma, &req);
+
+	mutex_unlock(&tegra_apb_dma_lock);
+}
diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h
new file mode 100644
index 000000000000..8b49e8c89a64
--- /dev/null
+++ b/arch/arm/mach-tegra/apbio.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2010 NVIDIA Corporation.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_APBIO_H
+#define __MACH_TEGRA_APBIO_H
+
+#ifdef CONFIG_TEGRA_SYSTEM_DMA
+
+u32 tegra_apb_readl(unsigned long offset);
+void tegra_apb_writel(u32 value, unsigned long offset);
+
+#else
+#include <asm/io.h>
+#include <mach/io.h>
+
+static inline u32 tegra_apb_readl(unsigned long offset)
+{
+        return readl(IO_TO_VIRT(offset));
+}
+
+static inline void tegra_apb_writel(u32 value, unsigned long offset)
+{
+        writel(value, IO_TO_VIRT(offset));
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index c0298b3f7d63..82f32300796c 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -18,18 +18,13 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/io.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/tps6586x.h>
 
-#include <mach/iomap.h>
 #include <mach/irqs.h>
 
 #include "board-harmony.h"
 
-#define PMC_CTRL		0x0
-#define PMC_CTRL_INTR_LOW	(1 << 17)
-
 static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
 	REGULATOR_SUPPLY("pex_clk", NULL),
 };
@@ -115,16 +110,6 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
 
 int __init harmony_regulator_init(void)
 {
-	void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
-	u32 pmc_ctrl;
-
-	/*
-	 * Configure the power management controller to trigger PMU
-	 * interrupts when low
-	 */
-	pmc_ctrl = readl(pmc + PMC_CTRL);
-	writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL);
-
 	i2c_register_board_info(3, harmony_regulators, 1);
 
 	return 0;
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 789bdc9e8f91..c00aadb01e09 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -101,7 +101,6 @@ static struct wm8903_platform_data harmony_wm8903_pdata = {
 static struct i2c_board_info __initdata wm8903_board_info = {
 	I2C_BOARD_INFO("wm8903", 0x1a),
 	.platform_data = &harmony_wm8903_pdata,
-	.irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
 };
 
 static void __init harmony_i2c_init(void)
@@ -111,6 +110,7 @@ static void __init harmony_i2c_init(void)
 	platform_device_register(&tegra_i2c_device3);
 	platform_device_register(&tegra_i2c_device4);
 
+	wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
 	i2c_register_board_info(0, &wm8903_board_info, 1);
 }
 
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index ebac65f52510..d669847f0485 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -159,7 +159,6 @@ static struct platform_device *seaboard_devices[] __initdata = {
 
 static struct i2c_board_info __initdata isl29018_device = {
 	I2C_BOARD_INFO("isl29018", 0x44),
-	.irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_ISL29018_IRQ),
 };
 
 static struct i2c_board_info __initdata adt7461_device = {
@@ -183,7 +182,6 @@ static struct wm8903_platform_data wm8903_pdata = {
 static struct i2c_board_info __initdata wm8903_device = {
 	I2C_BOARD_INFO("wm8903", 0x1a),
 	.platform_data = &wm8903_pdata,
-	.irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
 };
 
 static int seaboard_ehci_init(void)
@@ -214,7 +212,10 @@ static void __init seaboard_i2c_init(void)
 	gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
 	gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
 
+	isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
 	i2c_register_board_info(0, &isl29018_device, 1);
+
+	wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
 	i2c_register_board_info(0, &wm8903_device, 1);
 
 	i2c_register_board_info(3, &adt7461_device, 1);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 6c93cd0e520c..2f86fcca64a6 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -31,6 +31,24 @@
 #include "board.h"
 #include "clock.h"
 #include "fuse.h"
+#include "pmc.h"
+
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
+u32 tegra_uart_config[3] = {
+	/* Debug UART initialization required */
+	1,
+	/* Debug UART physical address */
+	(u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
+	/* Debug UART virtual address */
+	(u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
+};
 
 #ifdef CONFIG_OF
 static const struct of_device_id tegra_dt_irq_match[] __initconst = {
@@ -99,6 +117,7 @@ void __init tegra20_init_early(void)
 	tegra2_init_clocks();
 	tegra_clk_init_from_table(tegra20_clk_init_table);
 	tegra_init_cache(0x331, 0x441);
+	tegra_pmc_init();
 }
 #endif
 #ifdef CONFIG_ARCH_TEGRA_3x_SOC
@@ -106,5 +125,6 @@ void __init tegra30_init_early(void)
 {
 	tegra30_init_clocks();
 	tegra_init_cache(0x441, 0x551);
+	tegra_pmc_init();
 }
 #endif
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index c0cf967e47d3..abea4f6e2dd5 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -33,6 +33,8 @@
 #include <mach/iomap.h>
 #include <mach/suspend.h>
 
+#include "apbio.h"
+
 #define APB_DMA_GEN				0x000
 #define GEN_ENABLE				(1<<31)
 
@@ -50,8 +52,6 @@
 #define CSR_ONCE				(1<<27)
 #define CSR_FLOW				(1<<21)
 #define CSR_REQ_SEL_SHIFT			16
-#define CSR_REQ_SEL_MASK			(0x1F<<CSR_REQ_SEL_SHIFT)
-#define CSR_REQ_SEL_INVALID			(31<<CSR_REQ_SEL_SHIFT)
 #define CSR_WCOUNT_SHIFT			2
 #define CSR_WCOUNT_MASK				0xFFFC
 
@@ -133,6 +133,7 @@ struct tegra_dma_channel {
 
 static bool tegra_dma_initialized;
 static DEFINE_MUTEX(tegra_dma_lock);
+static DEFINE_SPINLOCK(enable_lock);
 
 static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
 static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
@@ -180,36 +181,94 @@ static void tegra_dma_stop(struct tegra_dma_channel *ch)
 
 static int tegra_dma_cancel(struct tegra_dma_channel *ch)
 {
-	u32 csr;
 	unsigned long irq_flags;
 
 	spin_lock_irqsave(&ch->lock, irq_flags);
 	while (!list_empty(&ch->list))
 		list_del(ch->list.next);
 
-	csr = readl(ch->addr + APB_DMA_CHAN_CSR);
-	csr &= ~CSR_REQ_SEL_MASK;
-	csr |= CSR_REQ_SEL_INVALID;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
 	tegra_dma_stop(ch);
 
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
 	return 0;
 }
 
+static unsigned int get_channel_status(struct tegra_dma_channel *ch,
+			struct tegra_dma_req *req, bool is_stop_dma)
+{
+	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
+	unsigned int status;
+
+	if (is_stop_dma) {
+		/*
+		 * STOP the DMA and get the transfer count.
+		 * Getting the transfer count is tricky.
+		 *  - Globally disable DMA on all channels
+		 *  - Read the channel's status register to know the number
+		 *    of pending bytes to be transfered.
+		 *  - Stop the dma channel
+		 *  - Globally re-enable DMA to resume other transfers
+		 */
+		spin_lock(&enable_lock);
+		writel(0, addr + APB_DMA_GEN);
+		udelay(20);
+		status = readl(ch->addr + APB_DMA_CHAN_STA);
+		tegra_dma_stop(ch);
+		writel(GEN_ENABLE, addr + APB_DMA_GEN);
+		spin_unlock(&enable_lock);
+		if (status & STA_ISE_EOC) {
+			pr_err("Got Dma Int here clearing");
+			writel(status, ch->addr + APB_DMA_CHAN_STA);
+		}
+		req->status = TEGRA_DMA_REQ_ERROR_ABORTED;
+	} else {
+		status = readl(ch->addr + APB_DMA_CHAN_STA);
+	}
+	return status;
+}
+
+/* should be called with the channel lock held */
+static unsigned int dma_active_count(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req, unsigned int status)
+{
+	unsigned int to_transfer;
+	unsigned int req_transfer_count;
+	unsigned int bytes_transferred;
+
+	to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1;
+	req_transfer_count = ch->req_transfer_count + 1;
+	bytes_transferred = req_transfer_count;
+	if (status & STA_BUSY)
+		bytes_transferred -= to_transfer;
+	/*
+	 * In continuous transfer mode, DMA only tracks the count of the
+	 * half DMA buffer. So, if the DMA already finished half the DMA
+	 * then add the half buffer to the completed count.
+	 */
+	if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) {
+		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
+			bytes_transferred += req_transfer_count;
+		if (status & STA_ISE_EOC)
+			bytes_transferred += req_transfer_count;
+	}
+	bytes_transferred *= 4;
+	return bytes_transferred;
+}
+
 int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
 	struct tegra_dma_req *_req)
 {
-	unsigned int csr;
 	unsigned int status;
 	struct tegra_dma_req *req = NULL;
 	int found = 0;
 	unsigned long irq_flags;
-	int to_transfer;
-	int req_transfer_count;
+	int stop = 0;
 
 	spin_lock_irqsave(&ch->lock, irq_flags);
+
+	if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req)
+		stop = 1;
+
 	list_for_each_entry(req, &ch->list, node) {
 		if (req == _req) {
 			list_del(&req->node);
@@ -222,47 +281,12 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
 		return 0;
 	}
 
-	/* STOP the DMA and get the transfer count.
-	 * Getting the transfer count is tricky.
-	 *  - Change the source selector to invalid to stop the DMA from
-	 *    FIFO to memory.
-	 *  - Read the status register to know the number of pending
-	 *    bytes to be transferred.
-	 *  - Finally stop or program the DMA to the next buffer in the
-	 *    list.
-	 */
-	csr = readl(ch->addr + APB_DMA_CHAN_CSR);
-	csr &= ~CSR_REQ_SEL_MASK;
-	csr |= CSR_REQ_SEL_INVALID;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
-	/* Get the transfer count */
-	status = readl(ch->addr + APB_DMA_CHAN_STA);
-	to_transfer = (status & STA_COUNT_MASK) >> STA_COUNT_SHIFT;
-	req_transfer_count = ch->req_transfer_count;
-	req_transfer_count += 1;
-	to_transfer += 1;
-
-	req->bytes_transferred = req_transfer_count;
-
-	if (status & STA_BUSY)
-		req->bytes_transferred -= to_transfer;
-
-	/* In continuous transfer mode, DMA only tracks the count of the
-	 * half DMA buffer. So, if the DMA already finished half the DMA
-	 * then add the half buffer to the completed count.
-	 *
-	 *	FIXME: There can be a race here. What if the req to
-	 *	dequue happens at the same time as the DMA just moved to
-	 *	the new buffer and SW didn't yet received the interrupt?
-	 */
-	if (ch->mode & TEGRA_DMA_MODE_CONTINOUS)
-		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
-			req->bytes_transferred += req_transfer_count;
+	if (!stop)
+		goto skip_stop_dma;
 
-	req->bytes_transferred *= 4;
+	status = get_channel_status(ch, req, true);
+	req->bytes_transferred = dma_active_count(ch, req, status);
 
-	tegra_dma_stop(ch);
 	if (!list_empty(&ch->list)) {
 		/* if the list is not empty, queue the next request */
 		struct tegra_dma_req *next_req;
@@ -270,6 +294,8 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
 			typeof(*next_req), node);
 		tegra_dma_update_hw(ch, next_req);
 	}
+
+skip_stop_dma:
 	req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
 
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -357,7 +383,7 @@ struct tegra_dma_channel *tegra_dma_allocate_channel(int mode)
 	int channel;
 	struct tegra_dma_channel *ch = NULL;
 
-	if (WARN_ON(!tegra_dma_initialized))
+	if (!tegra_dma_initialized)
 		return NULL;
 
 	mutex_lock(&tegra_dma_lock);
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index ea49bd93c6b9..c1afb2738769 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -19,25 +19,75 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <mach/iomap.h>
 
 #include "fuse.h"
+#include "apbio.h"
 
 #define FUSE_UID_LOW		0x108
 #define FUSE_UID_HIGH		0x10c
 #define FUSE_SKU_INFO		0x110
 #define FUSE_SPARE_BIT		0x200
 
-static inline u32 fuse_readl(unsigned long offset)
+int tegra_sku_id;
+int tegra_cpu_process_id;
+int tegra_core_process_id;
+enum tegra_revision tegra_revision;
+
+/* The BCT to use at boot is specified by board straps that can be read
+ * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
+ */
+int tegra_bct_strapping;
+
+#define STRAP_OPT 0x008
+#define GMI_AD0 (1 << 4)
+#define GMI_AD1 (1 << 5)
+#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
+#define RAM_CODE_SHIFT 4
+
+static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
+	[TEGRA_REVISION_UNKNOWN] = "unknown",
+	[TEGRA_REVISION_A01]     = "A01",
+	[TEGRA_REVISION_A02]     = "A02",
+	[TEGRA_REVISION_A03]     = "A03",
+	[TEGRA_REVISION_A03p]    = "A03 prime",
+	[TEGRA_REVISION_A04]     = "A04",
+};
+
+static inline u32 tegra_fuse_readl(unsigned long offset)
+{
+	return tegra_apb_readl(TEGRA_FUSE_BASE + offset);
+}
+
+static inline bool get_spare_fuse(int bit)
 {
-	return readl(IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+	return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4);
 }
 
-static inline void fuse_writel(u32 value, unsigned long offset)
+static enum tegra_revision tegra_get_revision(void)
 {
-	writel(value, IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+	void __iomem *chip_id = IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804;
+	u32 id = readl(chip_id);
+	u32 minor_rev = (id >> 16) & 0xf;
+	u32 chipid = (id >> 8) & 0xff;
+
+	switch (minor_rev) {
+	case 1:
+		return TEGRA_REVISION_A01;
+	case 2:
+		return TEGRA_REVISION_A02;
+	case 3:
+		if (chipid == 0x20 && (get_spare_fuse(18) || get_spare_fuse(19)))
+			return TEGRA_REVISION_A03p;
+		else
+			return TEGRA_REVISION_A03;
+	case 4:
+		return TEGRA_REVISION_A04;
+	default:
+		return TEGRA_REVISION_UNKNOWN;
+	}
 }
 
 void tegra_init_fuse(void)
@@ -46,41 +96,32 @@ void tegra_init_fuse(void)
 	reg |= 1 << 28;
 	writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
 
-	pr_info("Tegra SKU: %d CPU Process: %d Core Process: %d\n",
-		tegra_sku_id(), tegra_cpu_process_id(),
-		tegra_core_process_id());
+	reg = tegra_fuse_readl(FUSE_SKU_INFO);
+	tegra_sku_id = reg & 0xFF;
+
+	reg = tegra_fuse_readl(FUSE_SPARE_BIT);
+	tegra_cpu_process_id = (reg >> 6) & 3;
+
+	reg = tegra_fuse_readl(FUSE_SPARE_BIT);
+	tegra_core_process_id = (reg >> 12) & 3;
+
+	reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
+	tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
+
+	tegra_revision = tegra_get_revision();
+
+	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
+		tegra_revision_name[tegra_get_revision()],
+		tegra_sku_id, tegra_cpu_process_id,
+		tegra_core_process_id);
 }
 
 unsigned long long tegra_chip_uid(void)
 {
 	unsigned long long lo, hi;
 
-	lo = fuse_readl(FUSE_UID_LOW);
-	hi = fuse_readl(FUSE_UID_HIGH);
+	lo = tegra_fuse_readl(FUSE_UID_LOW);
+	hi = tegra_fuse_readl(FUSE_UID_HIGH);
 	return (hi << 32ull) | lo;
 }
 EXPORT_SYMBOL(tegra_chip_uid);
-
-int tegra_sku_id(void)
-{
-	int sku_id;
-	u32 reg = fuse_readl(FUSE_SKU_INFO);
-	sku_id = reg & 0xFF;
-	return sku_id;
-}
-
-int tegra_cpu_process_id(void)
-{
-	int cpu_process_id;
-	u32 reg = fuse_readl(FUSE_SPARE_BIT);
-	cpu_process_id = (reg >> 6) & 3;
-	return cpu_process_id;
-}
-
-int tegra_core_process_id(void)
-{
-	int core_process_id;
-	u32 reg = fuse_readl(FUSE_SPARE_BIT);
-	core_process_id = (reg >> 12) & 3;
-	return core_process_id;
-}
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
index 584b2e27dbda..d65d2abf803b 100644
--- a/arch/arm/mach-tegra/fuse.h
+++ b/arch/arm/mach-tegra/fuse.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-tegra/fuse.c
- *
  * Copyright (C) 2010 Google, Inc.
  *
  * Author:
@@ -17,8 +15,34 @@
  *
  */
 
+#ifndef __MACH_TEGRA_FUSE_H
+#define __MACH_TEGRA_FUSE_H
+
+enum tegra_revision {
+	TEGRA_REVISION_UNKNOWN = 0,
+	TEGRA_REVISION_A01,
+	TEGRA_REVISION_A02,
+	TEGRA_REVISION_A03,
+	TEGRA_REVISION_A03p,
+	TEGRA_REVISION_A04,
+	TEGRA_REVISION_MAX,
+};
+
+#define SKU_ID_T20	8
+#define SKU_ID_T25SE	20
+#define SKU_ID_AP25	23
+#define SKU_ID_T25	24
+#define SKU_ID_AP25E	27
+#define SKU_ID_T25E	28
+
+extern int tegra_sku_id;
+extern int tegra_cpu_process_id;
+extern int tegra_core_process_id;
+extern enum tegra_revision tegra_revision;
+
+extern int tegra_bct_strapping;
+
 unsigned long long tegra_chip_uid(void);
-int tegra_sku_id(void);
-int tegra_cpu_process_id(void);
-int tegra_core_process_id(void);
 void tegra_init_fuse(void);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 619abc63aee8..90069abd37bd 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -1,11 +1,17 @@
 /*
  * arch/arm/mach-tegra/include/mach/debug-macro.S
  *
- * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010,2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
  *
  * Author:
  *	Colin Cross <ccross@google.com>
  *	Erik Gilling <konkers@google.com>
+ *	Doug Anderson <dianders@chromium.org>
+ *	Stephen Warren <swarren@nvidia.com>
+ *
+ * Portions based on mach-omap2's debug-macro.S
+ * Copyright (C) 1994-1999 Russell King
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -18,18 +24,78 @@
  *
  */
 
+#include <linux/serial_reg.h>
+
 #include <mach/io.h>
 #include <mach/iomap.h>
+#include <mach/irammap.h>
+
+		.macro  addruart, rp, rv, tmp
+		adr	\rp, 99f		@ actual addr of 99f
+		ldr	\rv, [\rp]		@ linked addr is stored there
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ linked tegra_uart_config
+		sub	\tmp, \rp, \rv		@ actual tegra_uart_config
+		ldr	\rp, [\tmp]		@ Load tegra_uart_config
+		cmp	\rp, #1			@ needs intitialization?
+		bne	100f			@ no; go load the addresses
+		mov	\rv, #0			@ yes; record init is done
+		str	\rv, [\tmp]
+		mov	\rp, #TEGRA_IRAM_BASE	@ See if cookie is in IRAM
+		ldr	\rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
+		movw	\rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
+		movt	\rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
+		cmp	\rv, \rp		@ Cookie present?
+		bne	100f			@ No, use default UART
+		mov	\rp, #TEGRA_IRAM_BASE	@ Load UART address from IRAM
+		ldr	\rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
+		str	\rv, [\tmp, #4]		@ Store in tegra_uart_phys
+		sub	\rv, \rv, #IO_APB_PHYS	@ Calculate virt address
+		add	\rv, \rv, #IO_APB_VIRT
+		str	\rv, [\tmp, #8]		@ Store in tegra_uart_virt
+		b	100f
+
+		.align
+99:		.word	.
+		.word	tegra_uart_config
+		.ltorg
+
+100:		ldr	\rp, [\tmp, #4]		@ Load tegra_uart_phys
+		ldr	\rv, [\tmp, #8]		@ Load tegra_uart_virt
+		.endm
+
+#define UART_SHIFT 2
+
+/*
+ * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
+ * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
+ * We use the fact that all 5 valid UART addresses all have something in the
+ * 2nd-to-lowest byte.
+ */
 
-	.macro  addruart, rp, rv, tmp
-        ldr     \rp, =IO_APB_PHYS       @ physical
-        ldr     \rv, =IO_APB_VIRT        @ virtual
-	orr	\rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
-	orr	\rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
-	orr	\rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF)
-	orr	\rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
-	.endm
+		.macro	senduart, rd, rx
+		tst	\rx, #0x0000ff00
+		strneb	\rd, [\rx, #UART_TX << UART_SHIFT]
+1001:
+		.endm
 
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
+		.macro	busyuart, rd, rx
+		tst	\rx, #0x0000ff00
+		beq	1002f
+1001:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1001b
+1002:
+		.endm
 
+		.macro	waituart, rd, rx
+#ifdef FLOW_CONTROL
+		tst	\rx, #0x0000ff00
+		beq	1002f
+1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+1002:
+#endif
+		.endm
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
index 87d37fdf5084..6140820555e1 100644
--- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -25,8 +25,6 @@
 
 #define TEGRA_NR_GPIOS		INT_GPIO_NR
 
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-
 struct tegra_gpio_table {
 	int	gpio;	/* GPIO number */
 	bool	enable;	/* Enable for GPIO at init? */
diff --git a/arch/arm/mach-tegra/include/mach/irammap.h b/arch/arm/mach-tegra/include/mach/irammap.h
new file mode 100644
index 000000000000..0cbe63261854
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/irammap.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_IRAMMAP_H
+#define __MACH_TEGRA_IRAMMAP_H
+
+#include <asm/sizes.h>
+
+/* The first 1K of IRAM is permanently reserved for the CPU reset handler */
+#define TEGRA_IRAM_RESET_HANDLER_OFFSET	0
+#define TEGRA_IRAM_RESET_HANDLER_SIZE	SZ_1K
+
+/*
+ * These locations are written to by uncompress.h, and read by debug-macro.S.
+ * The first word holds the cookie value if the data is valid. The second
+ * word holds the UART physical address.
+ */
+#define TEGRA_IRAM_DEBUG_UART_OFFSET	SZ_1K
+#define TEGRA_IRAM_DEBUG_UART_SIZE	8
+#define TEGRA_IRAM_DEBUG_UART_COOKIE	0x55415254
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 4e8323770c79..5a440f315e57 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -2,10 +2,14 @@
  * arch/arm/mach-tegra/include/mach/uncompress.h
  *
  * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
  *
  * Author:
  *	Colin Cross <ccross@google.com>
  *	Erik Gilling <konkers@google.com>
+ *	Doug Anderson <dianders@chromium.org>
+ *	Stephen Warren <swarren@nvidia.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -25,36 +29,130 @@
 #include <linux/serial_reg.h>
 
 #include <mach/iomap.h>
+#include <mach/irammap.h>
+
+#define BIT(x) (1 << (x))
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+
+#define DEBUG_UART_SHIFT 2
+
+volatile u8 *uart;
 
 static void putc(int c)
 {
-	volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
-	int shift = 2;
-
 	if (uart == NULL)
 		return;
 
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+	while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE))
 		barrier();
-	uart[UART_TX << shift] = c;
+	uart[UART_TX << DEBUG_UART_SHIFT] = c;
 }
 
 static inline void flush(void)
 {
 }
 
+static inline void save_uart_address(void)
+{
+	u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
+
+	if (uart) {
+		buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
+		buf[1] = (u32)uart;
+	} else
+		buf[0] = 0;
+}
+
+/*
+ * Setup before decompression.  This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
 static inline void arch_decomp_setup(void)
 {
-	volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
-	int shift = 2;
+	static const struct {
+		u32 base;
+		u32 reset_reg;
+		u32 clock_reg;
+		u32 bit;
+	} uarts[] = {
+		{
+			TEGRA_UARTA_BASE,
+			TEGRA_CLK_RESET_BASE + 0x04,
+			TEGRA_CLK_RESET_BASE + 0x10,
+			6,
+		},
+		{
+			TEGRA_UARTB_BASE,
+			TEGRA_CLK_RESET_BASE + 0x04,
+			TEGRA_CLK_RESET_BASE + 0x10,
+			7,
+		},
+		{
+			TEGRA_UARTC_BASE,
+			TEGRA_CLK_RESET_BASE + 0x08,
+			TEGRA_CLK_RESET_BASE + 0x14,
+			23,
+		},
+		{
+			TEGRA_UARTD_BASE,
+			TEGRA_CLK_RESET_BASE + 0x0c,
+			TEGRA_CLK_RESET_BASE + 0x18,
+			1,
+		},
+		{
+			TEGRA_UARTE_BASE,
+			TEGRA_CLK_RESET_BASE + 0x0c,
+			TEGRA_CLK_RESET_BASE + 0x18,
+			2,
+		},
+	};
+	int i;
+	volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+	u32 chip, div;
+
+	/*
+	 * Look for the first UART that:
+	 * a) Is not in reset.
+	 * b) Is clocked.
+	 * c) Has a 'D' in the scratchpad register.
+	 *
+	 * Note that on Tegra30, the first two conditions are required, since
+	 * if not true, accesses to the UART scratch register will hang.
+	 * Tegra20 doesn't have this issue.
+	 *
+	 * The intent is that the bootloader will tell the kernel which UART
+	 * to use by setting up those conditions. If nothing found, we'll fall
+	 * back to what's specified in TEGRA_DEBUG_UART_BASE.
+	 */
+	for (i = 0; i < ARRAY_SIZE(uarts); i++) {
+		if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+			continue;
 
+		if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+			continue;
+
+		uart = (volatile u8 *)uarts[i].base;
+		if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
+			continue;
+
+		break;
+	}
+	if (i == ARRAY_SIZE(uarts))
+		uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+	save_uart_address();
 	if (uart == NULL)
 		return;
 
-	uart[UART_LCR << shift] |= UART_LCR_DLAB;
-	uart[UART_DLL << shift] = 0x75;
-	uart[UART_DLM << shift] = 0x0;
-	uart[UART_LCR << shift] = 3;
+	chip = (apb_misc[0x804 / 4] >> 8) & 0xff;
+	if (chip == 0x20)
+		div = 0x0075;
+	else
+		div = 0x00dd;
+
+	uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB;
+	uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff;
+	uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8;
+	uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
 }
 
 static inline void arch_decomp_wdog(void)
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
new file mode 100644
index 000000000000..7af6a54404be
--- /dev/null
+++ b/arch/arm/mach-tegra/pmc.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include <mach/iomap.h>
+
+#define PMC_CTRL		0x0
+#define PMC_CTRL_INTR_LOW	(1 << 17)
+
+static inline u32 tegra_pmc_readl(u32 reg)
+{
+	return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg));
+}
+
+static inline void tegra_pmc_writel(u32 val, u32 reg)
+{
+	writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg));
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id matches[] __initconst = {
+	{ .compatible = "nvidia,tegra20-pmc" },
+	{ }
+};
+#endif
+
+void __init tegra_pmc_init(void)
+{
+	/*
+	 * For now, Harmony is the only board that uses the PMC, and it wants
+	 * the signal inverted. Seaboard would too if it used the PMC.
+	 * Hopefully by the time other boards want to use the PMC, everything
+	 * will be device-tree, or they also want it inverted.
+	 */
+	bool invert_interrupt = true;
+	u32 val;
+
+#ifdef CONFIG_OF
+	if (of_have_populated_dt()) {
+		struct device_node *np;
+
+		invert_interrupt = false;
+
+		np = of_find_matching_node(NULL, matches);
+		if (np) {
+			if (of_find_property(np, "nvidia,invert-interrupt",
+						NULL))
+				invert_interrupt = true;
+		}
+	}
+#endif
+
+	val = tegra_pmc_readl(PMC_CTRL);
+	if (invert_interrupt)
+		val |= PMC_CTRL_INTR_LOW;
+	else
+		val &= ~PMC_CTRL_INTR_LOW;
+	tegra_pmc_writel(val, PMC_CTRL);
+}
diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h
new file mode 100644
index 000000000000..8995ee4a8768
--- /dev/null
+++ b/arch/arm/mach-tegra/pmc.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __MACH_TEGRA_PMC_H
+#define __MACH_TEGRA_PMC_H
+
+void tegra_pmc_init(void);
+
+#endif
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 1976e934cdd9..592a4eeb5328 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -720,7 +720,7 @@ static void tegra2_pllx_clk_init(struct clk *c)
 {
 	tegra2_pll_clk_init(c);
 
-	if (tegra_sku_id() == 7)
+	if (tegra_sku_id == 7)
 		c->max_rate = 750000000;
 }
 
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index 0f7ae6e90b55..5070d833bdd1 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -16,14 +16,19 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tegra_emc.h>
 
 #include <mach/iomap.h>
 
 #include "tegra2_emc.h"
+#include "fuse.h"
 
 #ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE
 static bool emc_enable = true;
@@ -32,18 +37,17 @@ static bool emc_enable;
 #endif
 module_param(emc_enable, bool, 0644);
 
-static void __iomem *emc = IO_ADDRESS(TEGRA_EMC_BASE);
-static const struct tegra_emc_table *tegra_emc_table;
-static int tegra_emc_table_size;
+static struct platform_device *emc_pdev;
+static void __iomem *emc_regbase;
 
 static inline void emc_writel(u32 val, unsigned long addr)
 {
-	writel(val, emc + addr);
+	writel(val, emc_regbase + addr);
 }
 
 static inline u32 emc_readl(unsigned long addr)
 {
-	return readl(emc + addr);
+	return readl(emc_regbase + addr);
 }
 
 static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
@@ -98,15 +102,15 @@ static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
 /* Select the closest EMC rate that is higher than the requested rate */
 long tegra_emc_round_rate(unsigned long rate)
 {
+	struct tegra_emc_pdata *pdata;
 	int i;
 	int best = -1;
 	unsigned long distance = ULONG_MAX;
 
-	if (!tegra_emc_table)
+	if (!emc_pdev)
 		return -EINVAL;
 
-	if (!emc_enable)
-		return -EINVAL;
+	pdata = emc_pdev->dev.platform_data;
 
 	pr_debug("%s: %lu\n", __func__, rate);
 
@@ -116,10 +120,10 @@ long tegra_emc_round_rate(unsigned long rate)
 	 */
 	rate = rate / 2 / 1000;
 
-	for (i = 0; i < tegra_emc_table_size; i++) {
-		if (tegra_emc_table[i].rate >= rate &&
-		    (tegra_emc_table[i].rate - rate) < distance) {
-			distance = tegra_emc_table[i].rate - rate;
+	for (i = 0; i < pdata->num_tables; i++) {
+		if (pdata->tables[i].rate >= rate &&
+		    (pdata->tables[i].rate - rate) < distance) {
+			distance = pdata->tables[i].rate - rate;
 			best = i;
 		}
 	}
@@ -127,9 +131,9 @@ long tegra_emc_round_rate(unsigned long rate)
 	if (best < 0)
 		return -EINVAL;
 
-	pr_debug("%s: using %lu\n", __func__, tegra_emc_table[best].rate);
+	pr_debug("%s: using %lu\n", __func__, pdata->tables[best].rate);
 
-	return tegra_emc_table[best].rate * 2 * 1000;
+	return pdata->tables[best].rate * 2 * 1000;
 }
 
 /*
@@ -142,37 +146,211 @@ long tegra_emc_round_rate(unsigned long rate)
  */
 int tegra_emc_set_rate(unsigned long rate)
 {
+	struct tegra_emc_pdata *pdata;
 	int i;
 	int j;
 
-	if (!tegra_emc_table)
+	if (!emc_pdev)
 		return -EINVAL;
 
+	pdata = emc_pdev->dev.platform_data;
+
 	/*
 	 * The EMC clock rate is twice the bus rate, and the bus rate is
 	 * measured in kHz
 	 */
 	rate = rate / 2 / 1000;
 
-	for (i = 0; i < tegra_emc_table_size; i++)
-		if (tegra_emc_table[i].rate == rate)
+	for (i = 0; i < pdata->num_tables; i++)
+		if (pdata->tables[i].rate == rate)
 			break;
 
-	if (i >= tegra_emc_table_size)
+	if (i >= pdata->num_tables)
 		return -EINVAL;
 
 	pr_debug("%s: setting to %lu\n", __func__, rate);
 
 	for (j = 0; j < TEGRA_EMC_NUM_REGS; j++)
-		emc_writel(tegra_emc_table[i].regs[j], emc_reg_addr[j]);
+		emc_writel(pdata->tables[i].regs[j], emc_reg_addr[j]);
 
-	emc_readl(tegra_emc_table[i].regs[TEGRA_EMC_NUM_REGS - 1]);
+	emc_readl(pdata->tables[i].regs[TEGRA_EMC_NUM_REGS - 1]);
 
 	return 0;
 }
 
-void tegra_init_emc(const struct tegra_emc_table *table, int table_size)
+#ifdef CONFIG_OF
+static struct device_node *tegra_emc_ramcode_devnode(struct device_node *np)
+{
+	struct device_node *iter;
+	u32 reg;
+
+	for_each_child_of_node(np, iter) {
+		if (of_property_read_u32(np, "nvidia,ram-code", &reg))
+			continue;
+		if (reg == tegra_bct_strapping)
+			return of_node_get(iter);
+	}
+
+	return NULL;
+}
+
+static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
+		struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *tnp, *iter;
+	struct tegra_emc_pdata *pdata;
+	int ret, i, num_tables;
+
+	if (!np)
+		return NULL;
+
+	if (of_find_property(np, "nvidia,use-ram-code", NULL)) {
+		tnp = tegra_emc_ramcode_devnode(np);
+		if (!tnp)
+			dev_warn(&pdev->dev,
+				 "can't find emc table for ram-code 0x%02x\n",
+				 tegra_bct_strapping);
+	} else
+		tnp = of_node_get(np);
+
+	if (!tnp)
+		return NULL;
+
+	num_tables = 0;
+	for_each_child_of_node(tnp, iter)
+		if (of_device_is_compatible(iter, "nvidia,tegra20-emc-table"))
+			num_tables++;
+
+	if (!num_tables) {
+		pdata = NULL;
+		goto out;
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	pdata->tables = devm_kzalloc(&pdev->dev,
+				     sizeof(*pdata->tables) * num_tables,
+				     GFP_KERNEL);
+
+	i = 0;
+	for_each_child_of_node(tnp, iter) {
+		u32 prop;
+
+		ret = of_property_read_u32(iter, "clock-frequency", &prop);
+		if (ret) {
+			dev_err(&pdev->dev, "no clock-frequency in %s\n",
+				iter->full_name);
+			continue;
+		}
+		pdata->tables[i].rate = prop;
+
+		ret = of_property_read_u32_array(iter, "nvidia,emc-registers",
+						 pdata->tables[i].regs,
+						 TEGRA_EMC_NUM_REGS);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"malformed emc-registers property in %s\n",
+				iter->full_name);
+			continue;
+		}
+
+		i++;
+	}
+	pdata->num_tables = i;
+
+out:
+	of_node_put(tnp);
+	return pdata;
+}
+#else
+static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
+		struct platform_device *pdev)
+{
+	return NULL;
+}
+#endif
+
+static struct tegra_emc_pdata __devinit *tegra_emc_fill_pdata(struct platform_device *pdev)
+{
+	struct clk *c = clk_get_sys(NULL, "emc");
+	struct tegra_emc_pdata *pdata;
+	unsigned long khz;
+	int i;
+
+	WARN_ON(pdev->dev.platform_data);
+	BUG_ON(IS_ERR_OR_NULL(c));
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables),
+				     GFP_KERNEL);
+
+	pdata->tables[0].rate = clk_get_rate(c) / 2 / 1000;
+
+	for (i = 0; i < TEGRA_EMC_NUM_REGS; i++)
+		pdata->tables[0].regs[i] = emc_readl(emc_reg_addr[i]);
+
+	pdata->num_tables = 1;
+
+	khz = pdata->tables[0].rate;
+	dev_info(&pdev->dev, "no tables provided, using %ld kHz emc, "
+		 "%ld kHz mem\n", khz * 2, khz);
+
+	return pdata;
+}
+
+static int __devinit tegra_emc_probe(struct platform_device *pdev)
+{
+	struct tegra_emc_pdata *pdata;
+	struct resource *res;
+
+	if (!emc_enable) {
+		dev_err(&pdev->dev, "disabled per module parameter\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing register base\n");
+		return -ENOMEM;
+	}
+
+	emc_regbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (!emc_regbase) {
+		dev_err(&pdev->dev, "failed to remap registers\n");
+		return -ENOMEM;
+	}
+
+	pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		pdata = tegra_emc_dt_parse_pdata(pdev);
+
+	if (!pdata)
+		pdata = tegra_emc_fill_pdata(pdev);
+
+	pdev->dev.platform_data = pdata;
+
+	emc_pdev = pdev;
+
+	return 0;
+}
+
+static struct of_device_id tegra_emc_of_match[] __devinitdata = {
+	{ .compatible = "nvidia,tegra20-emc", },
+	{ },
+};
+
+static struct platform_driver tegra_emc_driver = {
+	.driver         = {
+		.name   = "tegra-emc",
+		.owner  = THIS_MODULE,
+		.of_match_table = tegra_emc_of_match,
+	},
+	.probe          = tegra_emc_probe,
+};
+
+static int __init tegra_emc_init(void)
 {
-	tegra_emc_table = table;
-	tegra_emc_table_size = table_size;
+	return platform_driver_register(&tegra_emc_driver);
 }
+device_initcall(tegra_emc_init);
diff --git a/arch/arm/mach-tegra/tegra2_emc.h b/arch/arm/mach-tegra/tegra2_emc.h
index 19f08cb31603..f61409b54cb7 100644
--- a/arch/arm/mach-tegra/tegra2_emc.h
+++ b/arch/arm/mach-tegra/tegra2_emc.h
@@ -15,13 +15,10 @@
  *
  */
 
-#define TEGRA_EMC_NUM_REGS 46
-
-struct tegra_emc_table {
-	unsigned long rate;
-	u32 regs[TEGRA_EMC_NUM_REGS];
-};
+#ifndef __MACH_TEGRA_TEGRA2_EMC_H_
+#define __MACH_TEGRA_TEGRA2_EMC_H
 
 int tegra_emc_set_rate(unsigned long rate);
 long tegra_emc_round_rate(unsigned long rate);
-void tegra_init_emc(const struct tegra_emc_table *table, int table_size);
+
+#endif
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
index d8a56aee521b..ade4a1c4e2a3 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -60,9 +60,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		dev_err(dev, "no sata clock.\n");
 		return PTR_ERR(sata_clk);
 	}
-	ret = clk_enable(sata_clk);
+	ret = clk_prepare_enable(sata_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata clock.\n");
+		dev_err(dev, "can't prepare/enable sata clock.\n");
 		goto put_sata_clk;
 	}
 
@@ -73,9 +73,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		ret = PTR_ERR(sata_ref_clk);
 		goto release_sata_clk;
 	}
-	ret = clk_enable(sata_ref_clk);
+	ret = clk_prepare_enable(sata_ref_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata ref clock.\n");
+		dev_err(dev, "can't prepare/enable sata ref clock.\n");
 		goto put_sata_ref_clk;
 	}
 
@@ -104,11 +104,11 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 	return 0;
 
 release_sata_ref_clk:
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 put_sata_ref_clk:
 	clk_put(sata_ref_clk);
 release_sata_clk:
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 put_sata_clk:
 	clk_put(sata_clk);
 
@@ -117,10 +117,10 @@ put_sata_clk:
 
 static void imx_sata_exit(struct device *dev)
 {
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 	clk_put(sata_ref_clk);
 
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 	clk_put(sata_clk);
 
 }
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d3467f818c33..9129c9e7d532 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -203,7 +203,7 @@ static int __init epit_clockevent_init(struct clk *timer_clk)
 
 void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 94b60dd47137..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/*
- * These symbols are used by drivers/net/cs89x0.c.
- * This is ugly as hell, but we have to provide them until
- * someone fixed the driver.
- */
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 6e192c4a391a..8ddda365f1a0 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,7 +24,7 @@
 #define UART_PADDR	MX51_UART1_BASE_ADDR
 #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	MX53_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
 #define UART_PADDR	MX6Q_UART4_BASE_ADDR
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
index 233d0a5e2d68..1b9080385b46 100644
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ b/arch/arm/plat-mxc/include/mach/dma.h
@@ -60,8 +60,7 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan)
 
 static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
 {
-	return !strcmp(dev_name(chan->device->dev), "imx31-sdma") ||
-		!strcmp(dev_name(chan->device->dev), "imx35-sdma") ||
+	return strstr(dev_name(chan->device->dev), "sdma") ||
 		!strcmp(dev_name(chan->device->dev), "imx-dma");
 }
 
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index e032717f7d02..c0cab2270dd1 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -132,7 +132,7 @@ int pwm_enable(struct pwm_device *pwm)
 	int rc = 0;
 
 	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
+		rc = clk_prepare_enable(pwm->clk);
 		if (!rc)
 			pwm->clk_enabled = 1;
 	}
@@ -145,7 +145,7 @@ void pwm_disable(struct pwm_device *pwm)
 	writel(0, pwm->mmio_base + MX3_PWMCR);
 
 	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
+		clk_disable_unprepare(pwm->clk);
 		pwm->clk_enabled = 0;
 	}
 }
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 3599bf2cfd4f..f30dcacbbd0a 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -48,7 +48,7 @@ void mxc_restart(char mode, const char *cmd)
 
 		clk = clk_get_sys("imx2-wdt.0", NULL);
 		if (!IS_ERR(clk))
-			clk_enable(clk);
+			clk_prepare_enable(clk);
 		wcr_enable = (1 << 2);
 	}
 
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 1c96cdb4c35e..7daf7c9a413b 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -283,7 +283,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
 
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 647010109afa..9e8e63d52aab 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -484,7 +484,6 @@ struct omap_hwmod_class {
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
  * @opt_clks: other device clocks that drivers can request (0..*)
- * @vdd_name: voltage domain name
  * @voltdm: pointer to voltage domain (filled in at runtime)
  * @masters: ptr to array of OCP ifs that this hwmod can initiate on
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
@@ -528,7 +527,6 @@ struct omap_hwmod {
 	struct omap_hwmod_opt_clk	*opt_clks;
 	char				*clkdm_name;
 	struct clockdomain		*clkdm;
-	char				*vdd_name;
 	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
 	void				*dev_attr;
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index c5eaad529de5..0670f37aaaed 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -82,6 +82,22 @@ enum dma_ch {
 	DMACH_SLIMBUS4_TX,
 	DMACH_SLIMBUS5_RX,
 	DMACH_SLIMBUS5_TX,
+	DMACH_MIPI_HSI0,
+	DMACH_MIPI_HSI1,
+	DMACH_MIPI_HSI2,
+	DMACH_MIPI_HSI3,
+	DMACH_MIPI_HSI4,
+	DMACH_MIPI_HSI5,
+	DMACH_MIPI_HSI6,
+	DMACH_MIPI_HSI7,
+	DMACH_MTOM_0,
+	DMACH_MTOM_1,
+	DMACH_MTOM_2,
+	DMACH_MTOM_3,
+	DMACH_MTOM_4,
+	DMACH_MTOM_5,
+	DMACH_MTOM_6,
+	DMACH_MTOM_7,
 	/* END Marker, also used to denote a reserved channel */
 	DMACH_MAX,
 };
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 30b7cc14cef5..0f8263e93eea 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -18,51 +18,54 @@
 #define S3C2410_INTP_ALM	(1 << 1)
 #define S3C2410_INTP_TIC	(1 << 0)
 
-#define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN  (1<<0)
-#define S3C2410_RTCCON_CLKSEL (1<<1)
-#define S3C2410_RTCCON_CNTSEL (1<<2)
-#define S3C2410_RTCCON_CLKRST (1<<3)
-#define S3C64XX_RTCCON_TICEN  (1<<8)
+#define S3C2410_RTCCON		S3C2410_RTCREG(0x40)
+#define S3C2410_RTCCON_RTCEN	(1 << 0)
+#define S3C2410_RTCCON_CNTSEL	(1 << 2)
+#define S3C2410_RTCCON_CLKRST	(1 << 3)
+#define S3C2443_RTCCON_TICSEL	(1 << 4)
+#define S3C64XX_RTCCON_TICEN	(1 << 8)
 
-#define S3C64XX_RTCCON_TICMSK (0xF<<7)
-#define S3C64XX_RTCCON_TICSHT (7)
+#define S3C2410_TICNT		S3C2410_RTCREG(0x44)
+#define S3C2410_TICNT_ENABLE	(1 << 7)
 
-#define S3C2410_TICNT	      S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE  (1<<7)
+/* S3C2443: tick count is 15 bit wide
+ * TICNT[6:0] contains upper 7 bits
+ * TICNT1[7:0] contains lower 8 bits
+ */
+#define S3C2443_TICNT_PART(x)	((x & 0x7f00) >> 8)
+#define S3C2443_TICNT1		S3C2410_RTCREG(0x4C)
+#define S3C2443_TICNT1_PART(x)	(x & 0xff)
 
-#define S3C2410_RTCALM	      S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN  (1<<6)
-#define S3C2410_RTCALM_YEAREN (1<<5)
-#define S3C2410_RTCALM_MONEN  (1<<4)
-#define S3C2410_RTCALM_DAYEN  (1<<3)
-#define S3C2410_RTCALM_HOUREN (1<<2)
-#define S3C2410_RTCALM_MINEN  (1<<1)
-#define S3C2410_RTCALM_SECEN  (1<<0)
+/* S3C2416: tick count is 32 bit wide
+ * TICNT[6:0] contains bits [14:8]
+ * TICNT1[7:0] contains lower 8 bits
+ * TICNT2[16:0] contains upper 17 bits
+ */
+#define S3C2416_TICNT2		S3C2410_RTCREG(0x48)
+#define S3C2416_TICNT2_PART(x)	((x & 0xffff8000) >> 15)
 
-#define S3C2410_RTCALM_ALL \
-  S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
-  S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
-  S3C2410_RTCALM_SECEN
+#define S3C2410_RTCALM		S3C2410_RTCREG(0x50)
+#define S3C2410_RTCALM_ALMEN	(1 << 6)
+#define S3C2410_RTCALM_YEAREN	(1 << 5)
+#define S3C2410_RTCALM_MONEN	(1 << 4)
+#define S3C2410_RTCALM_DAYEN	(1 << 3)
+#define S3C2410_RTCALM_HOUREN	(1 << 2)
+#define S3C2410_RTCALM_MINEN	(1 << 1)
+#define S3C2410_RTCALM_SECEN	(1 << 0)
 
+#define S3C2410_ALMSEC		S3C2410_RTCREG(0x54)
+#define S3C2410_ALMMIN		S3C2410_RTCREG(0x58)
+#define S3C2410_ALMHOUR		S3C2410_RTCREG(0x5c)
 
-#define S3C2410_ALMSEC	      S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN	      S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR	      S3C2410_RTCREG(0x5c)
-
-#define S3C2410_ALMDATE	      S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON	      S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR	      S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCRST	      S3C2410_RTCREG(0x6c)
-
-#define S3C2410_RTCSEC	      S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN	      S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR	      S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE	      S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCDAY	      S3C2410_RTCREG(0x80)
-#define S3C2410_RTCMON	      S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR	      S3C2410_RTCREG(0x88)
+#define S3C2410_ALMDATE		S3C2410_RTCREG(0x60)
+#define S3C2410_ALMMON		S3C2410_RTCREG(0x64)
+#define S3C2410_ALMYEAR		S3C2410_RTCREG(0x68)
 
+#define S3C2410_RTCSEC		S3C2410_RTCREG(0x70)
+#define S3C2410_RTCMIN		S3C2410_RTCREG(0x74)
+#define S3C2410_RTCHOUR		S3C2410_RTCREG(0x78)
+#define S3C2410_RTCDATE		S3C2410_RTCREG(0x7c)
+#define S3C2410_RTCMON		S3C2410_RTCREG(0x84)
+#define S3C2410_RTCYEAR		S3C2410_RTCREG(0x88)
 
 #endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h
new file mode 100644
index 000000000000..21d8594d37ca
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/rtc-core.h
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_RTC_CORE_H
+#define __ASM_PLAT_RTC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
+	s3c_device_rtc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_RTC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index f82f888b91a9..317e246ffc56 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -40,6 +40,7 @@ enum clk_types {
  * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
  * @max_width: The maximum number of data bits supported.
  * @host_caps: Standard MMC host capabilities bit field.
+ * @host_caps2: The second standard MMC host capabilities bit field.
  * @cd_type: Type of Card Detection method (see cd_types enum above)
  * @clk_type: Type of clock divider method (see clk_types enum above)
  * @ext_cd_init: Initialize external card detect subsystem. Called on
@@ -63,6 +64,7 @@ enum clk_types {
 struct s3c_sdhci_platdata {
 	unsigned int	max_width;
 	unsigned int	host_caps;
+	unsigned int	host_caps2;
 	unsigned int	pm_caps;
 	enum cd_types	cd_type;
 	enum clk_types	clk_type;
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 0f707184eae0..fa78aa710ed1 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -53,6 +53,8 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->host_caps)
 		set->host_caps |= pd->host_caps;
+	if (pd->host_caps2)
+		set->host_caps2 |= pd->host_caps2;
 	if (pd->pm_caps)
 		set->pm_caps |= pd->pm_caps;
 	if (pd->clk_type)
author	Linus Torvalds <torvalds@linux-foundation.org>	2012-03-27 16:41:24 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2012-03-27 16:41:24 -0700
commit	34800598b2eebe061445216473b1e4c2ff5cba99 (patch)
tree	a6d0eb6fe45d9480888d7ddb34840e172ed80e56 /arch
parent	46b407ca4a6149c8d27fcec1881d4f184bec7c77 (diff)
parent	511f1cb6d426938fabf9c6d69ce4861b66ffd919 (diff)