ENGR00172274-02 - [MX6]: rework IEEE-1588 in MX6Q Sabre-lite/sd board.

- Config GPIO_16 pad to ENET_ANATOP_ETHERNET_REF_OUT.
- IEEE-1588 ts_clk and i2c3 are mutually exclusive, because
  all of them use GPIO_16, so it only for one function work
  at a moment.
- Test result:
	TO1.1 IEEE 1588 is convergent in Sabrelite board.

  Signed-off-by: Fugang Duan <B38611@freescale.com>

3 files changed, 32 insertions, 1 deletions

diff --git a/arch/arm/mach-mx6/board-mx6q_sabrelite.c b/arch/arm/mach-mx6/board-mx6q_sabrelite.c
index cb22baae013c..a18862cee0ba 100644
--- a/arch/arm/mach-mx6/board-mx6q_sabrelite.c
+++ b/arch/arm/mach-mx6/board-mx6q_sabrelite.c
@@ -212,7 +212,11 @@ static iomux_v3_cfg_t mx6q_sabrelite_pads[] = {
 
 	/* I2C3 */
 	MX6Q_PAD_GPIO_5__I2C3_SCL,	/* GPIO1[5] - J7 - Display card */
+#ifdef CONFIG_FEC_1588
+	MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT,
+#else
 	MX6Q_PAD_GPIO_16__I2C3_SDA,	/* GPIO7[11] - J15 - RGB connector */
+#endif
 
 	/* DISPLAY */
 	MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
@@ -1059,6 +1063,15 @@ static void __init mx6_sabrelite_board_init(void)
 	mxc_iomux_v3_setup_multiple_pads(mx6q_sabrelite_pads,
 					ARRAY_SIZE(mx6q_sabrelite_pads));
 
+#ifdef CONFIG_FEC_1588
+	/* Set GPIO_16 input for IEEE-1588 ts_clk and RMII reference clock
+	 * For MX6 GPR1 bit21 meaning:
+	 * Bit21:       0 - GPIO_16 pad output
+	 *              1 - GPIO_16 pad input
+	 */
+	mxc_iomux_set_gpr_register(1, 21, 1, 1);
+#endif
+
 	gp_reg_id = sabrelite_dvfscore_data.reg_id;
 	mx6q_sabrelite_init_uart();
 	imx6q_add_mxc_hdmi_core(&hdmi_core_data);
diff --git a/arch/arm/mach-mx6/board-mx6q_sabresd.c b/arch/arm/mach-mx6/board-mx6q_sabresd.c
index 349e47ca0dce..55290c2002f5 100644
--- a/arch/arm/mach-mx6/board-mx6q_sabresd.c
+++ b/arch/arm/mach-mx6/board-mx6q_sabresd.c
@@ -227,7 +227,11 @@ static iomux_v3_cfg_t mx6q_sabresd_pads[] = {
 
 	/* I2C3 */
 	MX6Q_PAD_GPIO_3__I2C3_SCL,	/* GPIO1[3] */
+#ifdef CONFIG_FEC_1588
+	MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT,
+#else
 	MX6Q_PAD_GPIO_16__I2C3_SDA,	/* GPIO7[11]*/
+#endif
 
 	/* DISPLAY */
 	MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
@@ -1111,6 +1115,15 @@ static void __init mx6_sabresd_board_init(void)
 	mxc_iomux_v3_setup_multiple_pads(mx6q_sabresd_pads,
 					ARRAY_SIZE(mx6q_sabresd_pads));
 
+#ifdef CONFIG_FEC_1588
+	/* Set GPIO_16 input for IEEE-1588 ts_clk and RMII reference clock
+	 * For MX6 GPR1 bit21 meaning:
+	 * Bit21:       0 - GPIO_16 pad output
+	 *              1 - GPIO_16 pad input
+	 */
+	 mxc_iomux_set_gpr_register(1, 21, 1, 1);
+#endif
+
 	gp_reg_id = sabresd_dvfscore_data.reg_id;
 	mx6q_sabresd_init_uart();
 	imx6q_add_mxc_hdmi_core(&hdmi_core_data);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx6q.h b/arch/arm/plat-mxc/include/mach/iomux-mx6q.h
index 3345cca68ecb..c6b932e7fe6c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx6q.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx6q.h
@@ -70,6 +70,10 @@ typedef enum iomux_config {
 		PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	\
 		PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
 
+#define MX6Q_GPIO_16_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |    \
+		PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED  |    \
+		PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
 #define MX6Q_DISP_PAD_CLT	MX6Q_HIGH_DRV
 
 #define MX6Q_I2C_PAD_CTRL      (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
@@ -6032,7 +6036,8 @@ typedef enum iomux_config {
 #define  MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN		\
 		(_MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define  MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT		\
-		(_MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
+		(_MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT | \
+		MUX_PAD_CTRL(MX6Q_GPIO_16_PAD_CTRL))
 #define  MX6Q_PAD_GPIO_16__USDHC1_LCTL		\
 		(_MX6Q_PAD_GPIO_16__USDHC1_LCTL | MUX_PAD_CTRL(MX6Q_USDHC_PAD_CTRL))
 #define  MX6Q_PAD_GPIO_16__SPDIF_IN1		\