Merge tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Consolidation and cleanups.
   - Some improvements regarding error handling.
   - Increase maximum amount of block devices.
   - Use correct OCR mask for SDIO when restoring power.
   - Fix prepared requests while doing BKOPS.
   - Convert to modern PM ops.
   - Add mmc_send_tuning() API and convert some hosts to use it.

  MMC host:
   - toshsd: New Toshiba PCI SD controller driver.
   - sdhci: 64-bit ADMA support.
   - sdhci: Some regulator fixes.
   - sdhci: HS400 support.
   - sdhci: Various fixes cleanups.
   - atmel-mci: Modernization and cleanups.
   - atmel-mci: Runtime PM support.
   - omap_hsmmc: Modernization and cleanups.
   - omap_hsmmc: Fix UHS card with DDR50 support.
   - dw_mmc: Support for ARM64 and Exynos 7 variant.
   - dw_mmc: Add support for IMG Pistachio variant.
   - dw_mmc: Various fixes and cleanups.
   - mvsdio: DMA fixes.
   - mxs-mmc: Modernization and cleanups.
   - mxcmmc: Various fixes"

* tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmc: (126 commits)
  mmc: sdhci-msm: Convert to mmc_send_tuning()
  mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning()
  mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter
  mmc: queue: Improve error handling during allocation of bounce buffers
  mmc: sdhci-acpi: Add two host capabilities for Intel
  mmc: sdhci-pci: Add two host capabilities for BYT
  mmc: sdhci-acpi: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
  mmc: sdhci-pci: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC to BYT
  mmc: atmel-mci: use probe deferring if dma controller is not ready yet
  mmc: atmel-mci: stop using specific initcall
  mmc: atmel-mci: remove __init/__exit attributes
  mmc: atmel-mci: remove useless DMA stuff for non-dt devices
  mmc: omap_hsmmc: Fix UHS card with DDR50 support
  mmc: core: add core-level function for sending tuning commands
  mmc: core: hold SD Clock before CMD11 during Signal
  mmc: mxs-mmc: Check for clk_prepare_enable() error
  mmc: mxs-mmc: Propagate the real error
  mmc: mxs-mmc: No need to do NULL check on 'iores'
  mmc: dw_mmc: Add support for IMG Pistachio
  mmc: mxs-mmc: Simplify PM hooks
  ...

17 files changed, 86 insertions, 169 deletions

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 21ab782cc8e9..06ecbafd01ee 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -19,6 +19,7 @@
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>
 #include <linux/platform_data/crypto-atmel.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
 
 #include <linux/platform_data/at91_adc.h>
 
@@ -30,7 +31,6 @@
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <linux/platform_data/dma-atmel.h>
-#include <mach/atmel-mci.h>
 #include <mach/hardware.h>
 
 #include <media/atmel-isi.h>
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
deleted file mode 100644
index 3069e4135573..000000000000
--- a/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-atmel.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
-	struct at_dma_slave	sdata;
-};
-
-/* accessor macros */
-#define	slave_data_ptr(s)	(&(s)->sdata)
-#define find_slave_dev(s)	((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 97767a27ca9d..e0ad64fde20e 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -21,8 +21,10 @@
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
+#include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
 #include <sound/tlv320aic3x.h>
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ddfc8df83c6a..3d5040f82e90 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -484,7 +484,7 @@ static struct omap_mux_partition *partition;
  * Current flows to eMMC when eMMC is off and the data lines are pulled up,
  * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
  */
-static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+static void rx51_mmc2_remux(struct device *dev, int power_on)
 {
 	if (power_on)
 		omap_mux_write_array(partition, rx51_mmc2_on_mux);
@@ -500,7 +500,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 		.cover_only	= true,
 		.gpio_cd	= 160,
 		.gpio_wp	= -EINVAL,
-		.power_saving	= true,
 	},
 	{
 		.name		= "internal",
@@ -510,7 +509,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.nonremovable	= true,
-		.power_saving	= true,
 		.remux		= rx51_mmc2_remux,
 	},
 	{}	/* Terminator */
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 07d4c7b35754..dc6e79c4484a 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,14 +14,15 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
 
 #include "soc.h"
 #include "omap_device.h"
 #include "omap-pm.h"
 
 #include "mux.h"
-#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
 
@@ -32,25 +33,14 @@ static u16 control_devconf1_offset;
 
 #define HSMMC_NAME_LEN	9
 
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int hsmmc_get_context_loss(struct device *dev)
-{
-	return omap_pm_get_dev_context_loss_count(dev);
-}
-
-#else
-#define hsmmc_get_context_loss NULL
-#endif
-
-static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
-				  int power_on, int vdd)
+static void omap_hsmmc1_before_set_reg(struct device *dev,
+				       int power_on, int vdd)
 {
 	u32 reg, prog_io;
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
 
-	if (mmc->slots[0].remux)
-		mmc->slots[0].remux(dev, slot, power_on);
+	if (mmc->remux)
+		mmc->remux(dev, power_on);
 
 	/*
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
@@ -72,7 +62,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
 			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
 		}
 
-		if (mmc->slots[0].internal_clock) {
+		if (mmc->internal_clock) {
 			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
 			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
@@ -96,8 +86,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
 	}
 }
 
-static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
-				 int power_on, int vdd)
+static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
 {
 	u32 reg;
 
@@ -120,34 +109,32 @@ static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
 	}
 }
 
-static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
+static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
 {
 	u32 reg;
 
 	reg = omap_ctrl_readl(control_devconf1_offset);
-	if (mmc->slots[0].internal_clock)
+	if (mmc->internal_clock)
 		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
 	else
 		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
 	omap_ctrl_writel(reg, control_devconf1_offset);
 }
 
-static void hsmmc2_before_set_reg(struct device *dev, int slot,
-				   int power_on, int vdd)
+static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
 {
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
 
-	if (mmc->slots[0].remux)
-		mmc->slots[0].remux(dev, slot, power_on);
+	if (mmc->remux)
+		mmc->remux(dev, power_on);
 
 	if (power_on)
 		hsmmc2_select_input_clk_src(mmc);
 }
 
-static int am35x_hsmmc2_set_power(struct device *dev, int slot,
-				  int power_on, int vdd)
+static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
 {
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
 
 	if (power_on)
 		hsmmc2_select_input_clk_src(mmc);
@@ -155,23 +142,22 @@ static int am35x_hsmmc2_set_power(struct device *dev, int slot,
 	return 0;
 }
 
-static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
-							int vdd)
+static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
 {
 	return 0;
 }
 
-static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
-			int controller_nr)
+static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
+				  *mmc_controller, int controller_nr)
 {
-	if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
+	if (gpio_is_valid(mmc_controller->switch_pin) &&
+	    (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->switch_pin,
+				   OMAP_PIN_INPUT_PULLUP);
+	if (gpio_is_valid(mmc_controller->gpio_wp) &&
+	    (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->gpio_wp,
+				   OMAP_PIN_INPUT_PULLUP);
 	if (cpu_is_omap34xx()) {
 		if (controller_nr == 0) {
 			omap_mux_init_signal("sdmmc1_clk",
@@ -180,7 +166,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 				OMAP_PIN_INPUT_PULLUP);
 			omap_mux_init_signal("sdmmc1_dat0",
 				OMAP_PIN_INPUT_PULLUP);
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
 				omap_mux_init_signal("sdmmc1_dat1",
 					OMAP_PIN_INPUT_PULLUP);
@@ -189,7 +175,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 				omap_mux_init_signal("sdmmc1_dat3",
 					OMAP_PIN_INPUT_PULLUP);
 			}
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 						MMC_CAP_8_BIT_DATA) {
 				omap_mux_init_signal("sdmmc1_dat4",
 					OMAP_PIN_INPUT_PULLUP);
@@ -214,7 +200,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7
 			 * need to be muxed in the board-*.c files
 			 */
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
 				omap_mux_init_signal("sdmmc2_dat1",
 					OMAP_PIN_INPUT_PULLUP);
@@ -223,7 +209,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 				omap_mux_init_signal("sdmmc2_dat3",
 					OMAP_PIN_INPUT_PULLUP);
 			}
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 							MMC_CAP_8_BIT_DATA) {
 				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
 					OMAP_PIN_INPUT_PULLUP);
@@ -243,7 +229,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 }
 
 static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
-					struct omap_mmc_platform_data *mmc)
+					struct omap_hsmmc_platform_data *mmc)
 {
 	char *hc_name;
 
@@ -259,38 +245,22 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	else
 		snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
 								c->mmc, 1);
-	mmc->slots[0].name = hc_name;
-	mmc->nr_slots = 1;
-	mmc->slots[0].caps = c->caps;
-	mmc->slots[0].pm_caps = c->pm_caps;
-	mmc->slots[0].internal_clock = !c->ext_clock;
-	mmc->max_freq = c->max_freq;
+	mmc->name = hc_name;
+	mmc->caps = c->caps;
+	mmc->internal_clock = !c->ext_clock;
 	mmc->reg_offset = 0;
-	mmc->get_context_loss_count = hsmmc_get_context_loss;
 
-	mmc->slots[0].switch_pin = c->gpio_cd;
-	mmc->slots[0].gpio_wp = c->gpio_wp;
+	mmc->switch_pin = c->gpio_cd;
+	mmc->gpio_wp = c->gpio_wp;
 
-	mmc->slots[0].remux = c->remux;
-	mmc->slots[0].init_card = c->init_card;
+	mmc->remux = c->remux;
+	mmc->init_card = c->init_card;
 
 	if (c->cover_only)
-		mmc->slots[0].cover = 1;
+		mmc->cover = 1;
 
 	if (c->nonremovable)
-		mmc->slots[0].nonremovable = 1;
-
-	if (c->power_saving)
-		mmc->slots[0].power_saving = 1;
-
-	if (c->no_off)
-		mmc->slots[0].no_off = 1;
-
-	if (c->no_off_init)
-		mmc->slots[0].no_regulator_off_init = c->no_off_init;
-
-	if (c->vcc_aux_disable_is_sleep)
-		mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+		mmc->nonremovable = 1;
 
 	/*
 	 * NOTE:  MMC slots should have a Vcc regulator set up.
@@ -300,42 +270,42 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	 * temporary HACK: ocr_mask instead of fixed supply
 	 */
 	if (soc_is_am35xx())
-		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+		mmc->ocr_mask = MMC_VDD_165_195 |
 					 MMC_VDD_26_27 |
 					 MMC_VDD_27_28 |
 					 MMC_VDD_29_30 |
 					 MMC_VDD_30_31 |
 					 MMC_VDD_31_32;
 	else
-		mmc->slots[0].ocr_mask = c->ocr_mask;
+		mmc->ocr_mask = c->ocr_mask;
 
 	if (!soc_is_am35xx())
-		mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+		mmc->features |= HSMMC_HAS_PBIAS;
 
 	switch (c->mmc) {
 	case 1:
-		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+		if (mmc->features & HSMMC_HAS_PBIAS) {
 			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			mmc->slots[0].before_set_reg =
+			mmc->before_set_reg =
 					omap_hsmmc1_before_set_reg;
-			mmc->slots[0].after_set_reg =
+			mmc->after_set_reg =
 					omap_hsmmc1_after_set_reg;
 		}
 
 		if (soc_is_am35xx())
-			mmc->slots[0].set_power = nop_mmc_set_power;
+			mmc->set_power = nop_mmc_set_power;
 
 		/* OMAP3630 HSMMC1 supports only 4-bit */
 		if (cpu_is_omap3630() &&
 				(c->caps & MMC_CAP_8_BIT_DATA)) {
 			c->caps &= ~MMC_CAP_8_BIT_DATA;
 			c->caps |= MMC_CAP_4_BIT_DATA;
-			mmc->slots[0].caps = c->caps;
+			mmc->caps = c->caps;
 		}
 		break;
 	case 2:
 		if (soc_is_am35xx())
-			mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+			mmc->set_power = am35x_hsmmc2_set_power;
 
 		if (c->ext_clock)
 			c->transceiver = 1;
@@ -343,17 +313,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 			c->caps &= ~MMC_CAP_8_BIT_DATA;
 			c->caps |= MMC_CAP_4_BIT_DATA;
 		}
-		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+		if (mmc->features & HSMMC_HAS_PBIAS) {
 			/* off-chip level shifting, or none */
-			mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
-			mmc->slots[0].after_set_reg = NULL;
+			mmc->before_set_reg = hsmmc2_before_set_reg;
+			mmc->after_set_reg = NULL;
 		}
 		break;
 	case 3:
 	case 4:
 	case 5:
-		mmc->slots[0].before_set_reg = NULL;
-		mmc->slots[0].after_set_reg = NULL;
+		mmc->before_set_reg = NULL;
+		mmc->after_set_reg = NULL;
 		break;
 	default:
 		pr_err("MMC%d configuration not supported!\n", c->mmc);
@@ -368,7 +338,7 @@ static int omap_hsmmc_done;
 void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 {
 	struct platform_device *pdev;
-	struct omap_mmc_platform_data *mmc_pdata;
+	struct omap_hsmmc_platform_data *mmc_pdata;
 	int res;
 
 	if (omap_hsmmc_done != 1)
@@ -388,8 +358,8 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 		if (!mmc_pdata)
 			continue;
 
-		mmc_pdata->slots[0].switch_pin = c->gpio_cd;
-		mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+		mmc_pdata->switch_pin = c->gpio_cd;
+		mmc_pdata->gpio_wp = c->gpio_wp;
 
 		res = omap_device_register(pdev);
 		if (res)
@@ -408,12 +378,12 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 	struct omap_device *od;
 	struct platform_device *pdev;
 	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
-	struct omap_mmc_platform_data *mmc_data;
-	struct omap_mmc_dev_attr *mmc_dev_attr;
+	struct omap_hsmmc_platform_data *mmc_data;
+	struct omap_hsmmc_dev_attr *mmc_dev_attr;
 	char *name;
 	int res;
 
-	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
+	mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
 	if (!mmc_data) {
 		pr_err("Cannot allocate memory for mmc device!\n");
 		return;
@@ -463,7 +433,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 	}
 
 	res = platform_device_add_data(pdev, mmc_data,
-			      sizeof(struct omap_mmc_platform_data));
+			      sizeof(struct omap_hsmmc_platform_data));
 	if (res) {
 		pr_err("Could not add pdata for %s\n", name);
 		goto put_pdev;
@@ -489,7 +459,7 @@ put_pdev:
 	platform_device_put(pdev);
 
 free_name:
-	kfree(mmc_data->slots[0].name);
+	kfree(mmc_data->name);
 
 free_mmc:
 	kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 7f2e790e0929..148cd9b15499 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,25 +12,18 @@ struct omap2_hsmmc_info {
 	u8	mmc;		/* controller 1/2/3 */
 	u32	caps;		/* 4/8 wires and any additional host
 				 * capabilities OR'd (ref. linux/mmc/host.h) */
-	u32	pm_caps;	/* PM capabilities */
 	bool	transceiver;	/* MMC-2 option */
 	bool	ext_clock;	/* use external pin for input clock */
 	bool	cover_only;	/* No card detect - just cover switch */
 	bool	nonremovable;	/* Nonremovable e.g. eMMC */
-	bool	power_saving;	/* Try to sleep or power off when possible */
-	bool	no_off;		/* power_saving and power is not to go off */
-	bool	no_off_init;	/* no power off when not in MMC sleep state */
-	bool	vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
 	bool	deferred;	/* mmc needs a deferred probe */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
 	struct platform_device *pdev;	/* mmc controller instance */
 	int	ocr_mask;	/* temporary HACK */
-	int	max_freq;	/* maximum clock, if constrained by external
-				 * circuitry, or 0 for default */
 	/* Remux (pad configuration) when powering on/off */
-	void (*remux)(struct device *dev, int slot, int power_on);
+	void (*remux)(struct device *dev, int power_on);
 	/* init some special card */
 	void (*init_card)(struct mmc_card *card);
 };
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
index 0cd4b089da9c..30d39b97e7dd 100644
--- a/arch/arm/mach-omap2/mmc.h
+++ b/arch/arm/mach-omap2/mmc.h
@@ -1,5 +1,3 @@
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
 
 #define OMAP24XX_NR_MMC		2
 #define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
@@ -7,14 +5,6 @@
 
 #define OMAP4_MMC_REG_OFFSET	0x100
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
 struct omap_hwmod;
 int omap_msdi_reset(struct omap_hwmod *oh);
 
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 16b20cedc38d..b7cb44abe49b 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -36,7 +36,6 @@
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
-#include "mmc.h"
 #include "prminst44xx.h"
 #include "prcm_mpu44xx.h"
 #include "omap4-sar-layout.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c2555cb95e71..79127b35fe60 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -15,12 +15,12 @@
 
 #include <linux/i2c-omap.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/hsmmc-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/omap-dma.h>
 #include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
-#include "mmc.h"
 #include "l3_2xxx.h"
 
 #include "soc.h"
@@ -372,7 +372,7 @@ static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
 	{ .role = "dbck", .clk = "mmchsdb1_fck" },
 };
 
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
 	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index a579b89ce9b7..cabc5695b504 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -15,10 +15,10 @@
  */
 
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include "omap_hwmod.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "cm33xx.h"
 #include "prm33xx.h"
@@ -836,7 +836,7 @@ static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
 };
 
 /* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = {
 	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
@@ -854,7 +854,7 @@ struct omap_hwmod am33xx_mmc0_hwmod = {
 };
 
 /* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = {
 	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
@@ -872,7 +872,7 @@ struct omap_hwmod am33xx_mmc1_hwmod = {
 };
 
 /* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = {
 	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 struct omap_hwmod am33xx_mmc2_hwmod = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 6b406ca4bd3b..0cf7b563dcd1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -27,7 +27,6 @@
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "omap_hwmod_33xx_43xx_common_data.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 2a78b093c0ce..11468eea3871 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -18,6 +18,7 @@
 #include <linux/i2c-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
 
 #include <linux/omap-dma.h>
 #include "l3_3xxx.h"
@@ -37,7 +38,6 @@
 #include "cm-regbits-34xx.h"
 
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "serial.h"
 
@@ -1786,12 +1786,12 @@ static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
 	{ .role = "dbck", .clk = "omap_32k_fck", },
 };
 
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
 	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
 /* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
 	.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
 		  OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
 };
@@ -1854,7 +1854,7 @@ static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
 };
 
 /* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
 	.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 44e5634bba34..d8a3cf1c1787 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,6 +22,7 @@
 
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
@@ -39,7 +40,6 @@
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 
 /* Base offset for all OMAP4 interrupts external to MPUSS */
@@ -1952,7 +1952,7 @@ static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = {
 };
 
 /* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
 	.flags	= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 1103aa0e0d29..5ec786a76d3c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -19,6 +19,7 @@
 
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
@@ -33,7 +34,6 @@
 #include "cm2_54xx.h"
 #include "prm54xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 
 /* Base offset for all OMAP5 interrupts external to MPUSS */
@@ -1269,7 +1269,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
 };
 
 /* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
 	.flags	= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 5684f112654b..711c97e90990 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -19,6 +19,7 @@
 
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
@@ -33,7 +34,6 @@
 #include "cm2_7xx.h"
 #include "prm7xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "soc.h"
 
@@ -1301,7 +1301,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
 };
 
 /* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
 	.flags	= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 37b75602adf6..cc92cdb9994c 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -17,7 +17,7 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
-#include <mach/atmel-mci.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
 #include <linux/atmel-mci.h>
 
 #include <asm/io.h>
diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
deleted file mode 100644
index 11d7f4b28dc8..000000000000
--- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-dw.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
-	struct dw_dma_slave	sdata;
-};
-
-/* accessor macros */
-#define	slave_data_ptr(s)	(&(s)->sdata)
-#define find_slave_dev(s)	((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */