diff options
| author | Stefan Agner <stefan.agner@toradex.com> | 2018-04-17 11:34:34 +0200 |
|---|---|---|
| committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2018-12-24 01:27:32 +0100 |
| commit | 72919eb5f9e7a9aeb5fc1c2aa694b07994fb5a8d (patch) | |
| tree | 51b06bd406edb37be4ab05661a7da2c9da0349c9 /block/blk-core.c | |
| parent | 3657cc7fe11427f27b189ffa7a83e91f4308a8db (diff) | |
serial: imx: add RS-485 device tree properties
Add device tree properties to influence RTS polarity and whether
the receiver is enabled during transmission (rs485-rts-active-low,
rs485-rx-during-tx).
This aligns with behavior with upstream Linux, where RTS is active
high by default (SER_RS485_RTS_AFTER_SEND) and the receiver is
disabled by default when using RS485 (SER_RS485_RX_DURING_TX).
Note that for Toradex hardware both properties are required, hence
using RS-485 on Toradex Carrier Boards requires the following
properties being specified in the device tree:
linux,rs485-enabled-at-boot-time;
rs485-rts-active-low;
rs485-rx-during-tx;
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Diffstat (limited to 'block/blk-core.c')
0 files changed, 0 insertions, 0 deletions