Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 230 insertions, 0 deletions

diff --git a/drivers/acpi/hardware/hwacpi.c b/drivers/acpi/hardware/hwacpi.c
new file mode 100644
index 000000000000..529e922bdc85
--- /dev/null
+++ b/drivers/acpi/hardware/hwacpi.c
@@ -0,0 +1,230 @@
+
+/******************************************************************************
+ *
+ * Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+
+
+#define _COMPONENT          ACPI_HARDWARE
+	 ACPI_MODULE_NAME    ("hwacpi")
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_initialize
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize and validate various ACPI registers
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_initialize (
+	void)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("hw_initialize");
+
+
+	/* We must have the ACPI tables by the time we get here */
+
+	if (!acpi_gbl_FADT) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "A FADT is not loaded\n"));
+
+		return_ACPI_STATUS (AE_NO_ACPI_TABLES);
+	}
+
+	/* Sanity check the FADT for valid values */
+
+	status = acpi_ut_validate_fadt ();
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_set_mode
+ *
+ * PARAMETERS:  Mode            - SYS_MODE_ACPI or SYS_MODE_LEGACY
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Transitions the system into the requested mode.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_set_mode (
+	u32                             mode)
+{
+
+	acpi_status                     status;
+	u32                             retry;
+
+
+	ACPI_FUNCTION_TRACE ("hw_set_mode");
+
+	/*
+	 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
+	 * system does not support mode transition.
+	 */
+	if (!acpi_gbl_FADT->smi_cmd) {
+		ACPI_REPORT_ERROR (("No SMI_CMD in FADT, mode transition failed.\n"));
+		return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE);
+	}
+
+	/*
+	 * ACPI 2.0 clarified the meaning of ACPI_ENABLE and ACPI_DISABLE
+	 * in FADT: If it is zero, enabling or disabling is not supported.
+	 * As old systems may have used zero for mode transition,
+	 * we make sure both the numbers are zero to determine these
+	 * transitions are not supported.
+	 */
+	if (!acpi_gbl_FADT->acpi_enable && !acpi_gbl_FADT->acpi_disable) {
+		ACPI_REPORT_ERROR (("No ACPI mode transition supported in this system (enable/disable both zero)\n"));
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	switch (mode) {
+	case ACPI_SYS_MODE_ACPI:
+
+		/* BIOS should have disabled ALL fixed and GP events */
+
+		status = acpi_os_write_port (acpi_gbl_FADT->smi_cmd,
+				  (u32) acpi_gbl_FADT->acpi_enable, 8);
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Attempting to enable ACPI mode\n"));
+		break;
+
+	case ACPI_SYS_MODE_LEGACY:
+
+		/*
+		 * BIOS should clear all fixed status bits and restore fixed event
+		 * enable bits to default
+		 */
+		status = acpi_os_write_port (acpi_gbl_FADT->smi_cmd,
+				 (u32) acpi_gbl_FADT->acpi_disable, 8);
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+				 "Attempting to enable Legacy (non-ACPI) mode\n"));
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_ERROR (("Could not write mode change, %s\n", acpi_format_exception (status)));
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Some hardware takes a LONG time to switch modes. Give them 3 sec to
+	 * do so, but allow faster systems to proceed more quickly.
+	 */
+	retry = 3000;
+	while (retry) {
+		if (acpi_hw_get_mode() == mode) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Mode %X successfully enabled\n", mode));
+			return_ACPI_STATUS (AE_OK);
+		}
+		acpi_os_stall(1000);
+		retry--;
+	}
+
+	ACPI_REPORT_ERROR (("Hardware never changed modes\n"));
+	return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_get_mode
+ *
+ * PARAMETERS:  none
+ *
+ * RETURN:      SYS_MODE_ACPI or SYS_MODE_LEGACY
+ *
+ * DESCRIPTION: Return current operating state of system.  Determined by
+ *              querying the SCI_EN bit.
+ *
+ ******************************************************************************/
+
+u32
+acpi_hw_get_mode (void)
+{
+	acpi_status                     status;
+	u32                             value;
+
+
+	ACPI_FUNCTION_TRACE ("hw_get_mode");
+
+
+	/*
+	 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
+	 * system does not support mode transition.
+	 */
+	if (!acpi_gbl_FADT->smi_cmd) {
+		return_VALUE (ACPI_SYS_MODE_ACPI);
+	}
+
+	status = acpi_get_register (ACPI_BITREG_SCI_ENABLE, &value, ACPI_MTX_LOCK);
+	if (ACPI_FAILURE (status)) {
+		return_VALUE (ACPI_SYS_MODE_LEGACY);
+	}
+
+	if (value) {
+		return_VALUE (ACPI_SYS_MODE_ACPI);
+	}
+	else {
+		return_VALUE (ACPI_SYS_MODE_LEGACY);
+	}
+}