diff options
| author | Aaron Lu <aaron.lu@intel.com> | 2013-08-23 10:17:54 +0800 |
|---|---|---|
| committer | Tejun Heo <tj@kernel.org> | 2013-08-23 12:09:23 -0400 |
| commit | f1bc1e4c44b1b78fe34431936c60759b5aad5e3f (patch) | |
| tree | 8412ab2e71faa0e8d55be7a4565090af6669d4fa /drivers/ata/libata-scsi.c | |
| parent | 2b79c56fb41d3956f672990fe83e342a809c89ab (diff) | |
ata: acpi: rework the ata acpi bind support
Binding ACPI handle to SCSI device has several drawbacks, namely:
1 During ATA device initialization time, ACPI handle will be needed
while SCSI devices are not created yet. So each time ACPI handle is
needed, instead of retrieving the handle by ACPI_HANDLE macro,
a namespace scan is performed to find the handle for the corresponding
ATA device. This is inefficient, and also expose a restriction on
calling path not holding any lock.
2 The binding to SCSI device tree makes code complex, while at the same
time doesn't bring us any benefit. All ACPI handlings are still done
in ATA module, not in SCSI.
Rework the ATA ACPI binding code to bind ACPI handle to ATA transport
devices(ATA port and ATA device). The binding needs to be done only once,
since the ATA transport devices do not go away with hotplug. And due to
this, the flush_work call in hotplug handler for ATA bay is no longer
needed.
Tested on an Intel test platform for binding and runtime power off for
ODD(ZPODD) and hard disk; on an ASUS S400C for binding and normal boot
and S3, where its SATA port node has _SDD and _GTF control methods when
configured as an AHCI controller and its PATA device node has _GTF
control method when configured as an IDE controller. SATA PMP binding
and ATA hotplug is not tested.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Dirk Griesbach <spamthis@freenet.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/libata-scsi.c')
| -rw-r--r-- | drivers/ata/libata-scsi.c | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 83c08907e042..f177ad6bfd09 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -49,7 +49,6 @@ #include <linux/hdreg.h> #include <linux/uaccess.h> #include <linux/suspend.h> -#include <linux/pm_qos.h> #include <asm/unaligned.h> #include "libata.h" @@ -3665,9 +3664,7 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) if (!IS_ERR(sdev)) { dev->sdev = sdev; scsi_device_put(sdev); - if (zpodd_dev_enabled(dev)) - dev_pm_qos_expose_flags( - &sdev->sdev_gendev, 0); + ata_scsi_acpi_bind(dev); } else { dev->sdev = NULL; } @@ -3755,6 +3752,8 @@ static void ata_scsi_remove_dev(struct ata_device *dev) struct scsi_device *sdev; unsigned long flags; + ata_scsi_acpi_unbind(dev); + /* Alas, we need to grab scan_mutex to ensure SCSI device * state doesn't change underneath us and thus * scsi_device_get() always succeeds. The mutex locking can @@ -3764,9 +3763,6 @@ static void ata_scsi_remove_dev(struct ata_device *dev) mutex_lock(&ap->scsi_host->scan_mutex); spin_lock_irqsave(ap->lock, flags); - if (zpodd_dev_enabled(dev)) - zpodd_exit(dev); - /* clearing dev->sdev is protected by host lock */ sdev = dev->sdev; dev->sdev = NULL; @@ -3816,6 +3812,9 @@ static void ata_scsi_handle_link_detach(struct ata_link *link) dev->flags &= ~ATA_DFLAG_DETACHED; spin_unlock_irqrestore(ap->lock, flags); + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); + ata_scsi_remove_dev(dev); } } |