libata: make reset related methods proper port operations

Currently reset methods are not specified directly in the
ata_port_operations table.  If a LLD wants to use custom reset
methods, it should construct and use a error_handler which uses those
reset methods.  It's done this way for two reasons.

First, the ops table already contained too many methods and adding
four more of them would noticeably increase the amount of necessary
boilerplate code all over low level drivers.

Second, as ->error_handler uses those reset methods, it can get
confusing.  ie. By overriding ->error_handler, those reset ops can be
made useless making layering a bit hazy.

Now that ops table uses inheritance, the first problem doesn't exist
anymore.  The second isn't completely solved but is relieved by
providing default values - most drivers can just override what it has
implemented and don't have to concern itself about higher level
callbacks.  In fact, there currently is no driver which actually
modifies error handling behavior.  Drivers which override
->error_handler just wraps the standard error handler only to prepare
the controller for EH.  I don't think making ops layering strict has
any noticeable benefit.

This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and
their PMP counterparts propoer ops.  Default ops are provided in the
base ops tables and drivers are converted to override individual reset
methods instead of creating custom error_handler.

* ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs
  aren't accessible.  sata_promise doesn't need to use separate
  error_handlers for PATA and SATA anymore.

* softreset is broken for sata_inic162x and sata_sx4.  As libata now
  always prefers hardreset, this doesn't really matter but the ops are
  forced to NULL using ATA_OP_NULL for documentation purpose.

* pata_hpt374 needs to use different prereset for the first and second
  PCI functions.  This used to be done by branching from
  hpt374_error_handler().  The proper way to do this is to use
  separate ops and port_info tables for each function.  Converted.

Signed-off-by: Tejun Heo <htejun@gmail.com>

1 files changed, 2 insertions, 14 deletions

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index c774be93ae04..cd44ee3d3cc1 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -148,7 +148,7 @@ static int hpt3x2n_cable_detect(struct ata_port *ap)
  *	Reset the hardware and state machine,
  */
 
-static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -160,18 +160,6 @@ static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline)
 }
 
 /**
- *	hpt3x2n_error_handler	-	probe the hpt3x2n bus
- *	@ap: ATA port to reset
- *
- *	Perform the probe reset handling for the 3x2N
- */
-
-static void hpt3x2n_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-/**
  *	hpt3x2n_set_piomode		-	PIO setup
  *	@ap: ATA interface
  *	@adev: device on the interface
@@ -355,7 +343,7 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 	.cable_detect	= hpt3x2n_cable_detect,
 	.set_piomode	= hpt3x2n_set_piomode,
 	.set_dmamode	= hpt3x2n_set_dmamode,
-	.error_handler	= hpt3x2n_error_handler,
+	.prereset	= hpt3x2n_pre_reset,
 };
 
 /**