summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_it821x.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-08-29 18:12:40 -0400
committerJeff Garzik <jeff@garzik.org>2006-08-29 18:12:40 -0400
commit669a5db411d85a14f86cd92bc16bf7ab5b8aa235 (patch)
tree8d4f9d63e18185695a4d97e1a3fa4e18b61c7345 /drivers/ata/pata_it821x.c
parentb01e86fee6c821e4e003fd4e9f65453ac478a58e (diff)
[libata] Add a bunch of PATA drivers.
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_it821x.c')
-rw-r--r--drivers/ata/pata_it821x.c847
1 files changed, 847 insertions, 0 deletions
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
new file mode 100644
index 000000000000..c8a7798f8ce5
--- /dev/null
+++ b/drivers/ata/pata_it821x.c
@@ -0,0 +1,847 @@
+/*
+ * ata-it821x.c - IT821x PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * based upon
+ *
+ * it821x.c
+ *
+ * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004
+ *
+ * Copyright (C) 2004 Red Hat <alan@redhat.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ * Based in part on the ITE vendor provided SCSI driver.
+ *
+ * Documentation available from
+ * http://www.ite.com.tw/pc/IT8212F_V04.pdf
+ * Some other documents are NDA.
+ *
+ * The ITE8212 isn't exactly a standard IDE controller. It has two
+ * modes. In pass through mode then it is an IDE controller. In its smart
+ * mode its actually quite a capable hardware raid controller disguised
+ * as an IDE controller. Smart mode only understands DMA read/write and
+ * identify, none of the fancier commands apply. The IT8211 is identical
+ * in other respects but lacks the raid mode.
+ *
+ * Errata:
+ * o Rev 0x10 also requires master/slave hold the same DMA timings and
+ * cannot do ATAPI MWDMA.
+ * o The identify data for raid volumes lacks CHS info (technically ok)
+ * but also fails to set the LBA28 and other bits. We fix these in
+ * the IDE probe quirk code.
+ * o If you write LBA48 sized I/O's (ie > 256 sector) in smart mode
+ * raid then the controller firmware dies
+ * o Smart mode without RAID doesn't clear all the necessary identify
+ * bits to reduce the command set to the one used
+ *
+ * This has a few impacts on the driver
+ * - In pass through mode we do all the work you would expect
+ * - In smart mode the clocking set up is done by the controller generally
+ * but we must watch the other limits and filter.
+ * - There are a few extra vendor commands that actually talk to the
+ * controller but only work PIO with no IRQ.
+ *
+ * Vendor areas of the identify block in smart mode are used for the
+ * timing and policy set up. Each HDD in raid mode also has a serial
+ * block on the disk. The hardware extra commands are get/set chip status,
+ * rebuild, get rebuild status.
+ *
+ * In Linux the driver supports pass through mode as if the device was
+ * just another IDE controller. If the smart mode is running then
+ * volumes are managed by the controller firmware and each IDE "disk"
+ * is a raid volume. Even more cute - the controller can do automated
+ * hotplug and rebuild.
+ *
+ * The pass through controller itself is a little demented. It has a
+ * flaw that it has a single set of PIO/MWDMA timings per channel so
+ * non UDMA devices restrict each others performance. It also has a
+ * single clock source per channel so mixed UDMA100/133 performance
+ * isn't perfect and we have to pick a clock. Thankfully none of this
+ * matters in smart mode. ATAPI DMA is not currently supported.
+ *
+ * It seems the smart mode is a win for RAID1/RAID10 but otherwise not.
+ *
+ * TODO
+ * - ATAPI and other speed filtering
+ * - Command filter in smart mode
+ * - RAID configuration ioctls
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+
+#define DRV_NAME "pata_it821x"
+#define DRV_VERSION "0.3.2"
+
+struct it821x_dev
+{
+ unsigned int smart:1, /* Are we in smart raid mode */
+ timing10:1; /* Rev 0x10 */
+ u8 clock_mode; /* 0, ATA_50 or ATA_66 */
+ u8 want[2][2]; /* Mode/Pri log for master slave */
+ /* We need these for switching the clock when DMA goes on/off
+ The high byte is the 66Mhz timing */
+ u16 pio[2]; /* Cached PIO values */
+ u16 mwdma[2]; /* Cached MWDMA values */
+ u16 udma[2]; /* Cached UDMA values (per drive) */
+ u16 last_device; /* Master or slave loaded ? */
+};
+
+#define ATA_66 0
+#define ATA_50 1
+#define ATA_ANY 2
+
+#define UDMA_OFF 0
+#define MWDMA_OFF 0
+
+/*
+ * We allow users to force the card into non raid mode without
+ * flashing the alternative BIOS. This is also neccessary right now
+ * for embedded platforms that cannot run a PC BIOS but are using this
+ * device.
+ */
+
+static int it8212_noraid;
+
+/**
+ * it821x_pre_reset - probe
+ * @ap: ATA port
+ *
+ * Set the cable type
+ */
+
+static int it821x_pre_reset(struct ata_port *ap)
+{
+ ap->cbl = ATA_CBL_PATA80;
+ return ata_std_prereset(ap);
+}
+
+/**
+ * it821x_error_handler - probe/reset
+ * @ap: ATA port
+ *
+ * Set the cable type and trigger a probe
+ */
+
+static void it821x_error_handler(struct ata_port *ap)
+{
+ return ata_bmdma_drive_eh(ap, it821x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * it821x_program - program the PIO/MWDMA registers
+ * @ap: ATA port
+ * @adev: Device to program
+ * @timing: Timing value (66Mhz in top 8bits, 50 in the low 8)
+ *
+ * Program the PIO/MWDMA timing for this channel according to the
+ * current clock. These share the same register so are managed by
+ * the DMA start/stop sequence as with the old driver.
+ */
+
+static void it821x_program(struct ata_port *ap, struct ata_device *adev, u16 timing)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct it821x_dev *itdev = ap->private_data;
+ int channel = ap->port_no;
+ u8 conf;
+
+ /* Program PIO/MWDMA timing bits */
+ if (itdev->clock_mode == ATA_66)
+ conf = timing >> 8;
+ else
+ conf = timing & 0xFF;
+ pci_write_config_byte(pdev, 0x54 + 4 * channel, conf);
+}
+
+
+/**
+ * it821x_program_udma - program the UDMA registers
+ * @ap: ATA port
+ * @adev: ATA device to update
+ * @timing: Timing bits. Top 8 are for 66Mhz bottom for 50Mhz
+ *
+ * Program the UDMA timing for this drive according to the
+ * current clock. Handles the dual clocks and also knows about
+ * the errata on the 0x10 revision. The UDMA errata is partly handled
+ * here and partly in start_dma.
+ */
+
+static void it821x_program_udma(struct ata_port *ap, struct ata_device *adev, u16 timing)
+{
+ struct it821x_dev *itdev = ap->private_data;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int channel = ap->port_no;
+ int unit = adev->devno;
+ u8 conf;
+
+ /* Program UDMA timing bits */
+ if (itdev->clock_mode == ATA_66)
+ conf = timing >> 8;
+ else
+ conf = timing & 0xFF;
+ if (itdev->timing10 == 0)
+ pci_write_config_byte(pdev, 0x56 + 4 * channel + unit, conf);
+ else {
+ /* Early revision must be programmed for both together */
+ pci_write_config_byte(pdev, 0x56 + 4 * channel, conf);
+ pci_write_config_byte(pdev, 0x56 + 4 * channel + 1, conf);
+ }
+}
+
+/**
+ * it821x_clock_strategy
+ * @ap: ATA interface
+ * @adev: ATA device being updated
+ *
+ * Select between the 50 and 66Mhz base clocks to get the best
+ * results for this interface.
+ */
+
+static void it821x_clock_strategy(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct it821x_dev *itdev = ap->private_data;
+ u8 unit = adev->devno;
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ int clock, altclock;
+ u8 v;
+ int sel = 0;
+
+ /* Look for the most wanted clocking */
+ if (itdev->want[0][0] > itdev->want[1][0]) {
+ clock = itdev->want[0][1];
+ altclock = itdev->want[1][1];
+ } else {
+ clock = itdev->want[1][1];
+ altclock = itdev->want[0][1];
+ }
+
+ /* Master doesn't care does the slave ? */
+ if (clock == ATA_ANY)
+ clock = altclock;
+
+ /* Nobody cares - keep the same clock */
+ if (clock == ATA_ANY)
+ return;
+ /* No change */
+ if (clock == itdev->clock_mode)
+ return;
+
+ /* Load this into the controller */
+ if (clock == ATA_66)
+ itdev->clock_mode = ATA_66;
+ else {
+ itdev->clock_mode = ATA_50;
+ sel = 1;
+ }
+ pci_read_config_byte(pdev, 0x50, &v);
+ v &= ~(1 << (1 + ap->port_no));
+ v |= sel << (1 + ap->port_no);
+ pci_write_config_byte(pdev, 0x50, v);
+
+ /*
+ * Reprogram the UDMA/PIO of the pair drive for the switch
+ * MWDMA will be dealt with by the dma switcher
+ */
+ if (pair && itdev->udma[1-unit] != UDMA_OFF) {
+ it821x_program_udma(ap, pair, itdev->udma[1-unit]);
+ it821x_program(ap, pair, itdev->pio[1-unit]);
+ }
+ /*
+ * Reprogram the UDMA/PIO of our drive for the switch.
+ * MWDMA will be dealt with by the dma switcher
+ */
+ if (itdev->udma[unit] != UDMA_OFF) {
+ it821x_program_udma(ap, adev, itdev->udma[unit]);
+ it821x_program(ap, adev, itdev->pio[unit]);
+ }
+}
+
+/**
+ * it821x_passthru_set_piomode - set PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Configure for PIO mode. This is complicated as the register is
+ * shared by PIO and MWDMA and for both channels.
+ */
+
+static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ /* Spec says 89 ref driver uses 88 */
+ static const u16 pio[] = { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
+ static const u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY };
+
+ struct it821x_dev *itdev = ap->private_data;
+ int unit = adev->devno;
+ int mode_wanted = adev->pio_mode - XFER_PIO_0;
+
+ /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */
+ itdev->want[unit][1] = pio_want[mode_wanted];
+ itdev->want[unit][0] = 1; /* PIO is lowest priority */
+ itdev->pio[unit] = pio[mode_wanted];
+ it821x_clock_strategy(ap, adev);
+ it821x_program(ap, adev, itdev->pio[unit]);
+}
+
+/**
+ * it821x_passthru_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Set up the DMA modes. The actions taken depend heavily on the mode
+ * to use. If UDMA is used as is hopefully the usual case then the
+ * timing register is private and we need only consider the clock. If
+ * we are using MWDMA then we have to manage the setting ourself as
+ * we switch devices and mode.
+ */
+
+static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u16 dma[] = { 0x8866, 0x3222, 0x3121 };
+ static const u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY };
+ static const u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 };
+ static const u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct it821x_dev *itdev = ap->private_data;
+ int channel = ap->port_no;
+ int unit = adev->devno;
+ u8 conf;
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ int mode_wanted = adev->dma_mode - XFER_UDMA_0;
+
+ itdev->want[unit][1] = udma_want[mode_wanted];
+ itdev->want[unit][0] = 3; /* UDMA is high priority */
+ itdev->mwdma[unit] = MWDMA_OFF;
+ itdev->udma[unit] = udma[mode_wanted];
+ if (mode_wanted >= 5)
+ itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */
+
+ /* UDMA on. Again revision 0x10 must do the pair */
+ pci_read_config_byte(pdev, 0x50, &conf);
+ if (itdev->timing10)
+ conf &= channel ? 0x9F: 0xE7;
+ else
+ conf &= ~ (1 << (3 + 2 * channel + unit));
+ pci_write_config_byte(pdev, 0x50, conf);
+ it821x_clock_strategy(ap, adev);
+ it821x_program_udma(ap, adev, itdev->udma[unit]);
+ } else {
+ int mode_wanted = adev->dma_mode - XFER_MW_DMA_0;
+
+ itdev->want[unit][1] = mwdma_want[mode_wanted];
+ itdev->want[unit][0] = 2; /* MWDMA is low priority */
+ itdev->mwdma[unit] = dma[mode_wanted];
+ itdev->udma[unit] = UDMA_OFF;
+
+ /* UDMA bits off - Revision 0x10 do them in pairs */
+ pci_read_config_byte(pdev, 0x50, &conf);
+ if (itdev->timing10)
+ conf |= channel ? 0x60: 0x18;
+ else
+ conf |= 1 << (3 + 2 * channel + unit);
+ pci_write_config_byte(pdev, 0x50, conf);
+ it821x_clock_strategy(ap, adev);
+ }
+}
+
+/**
+ * it821x_passthru_dma_start - DMA start callback
+ * @qc: Command in progress
+ *
+ * Usually drivers set the DMA timing at the point the set_dmamode call
+ * is made. IT821x however requires we load new timings on the
+ * transitions in some cases.
+ */
+
+static void it821x_passthru_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct it821x_dev *itdev = ap->private_data;
+ int unit = adev->devno;
+
+ if (itdev->mwdma[unit] != MWDMA_OFF)
+ it821x_program(ap, adev, itdev->mwdma[unit]);
+ else if (itdev->udma[unit] != UDMA_OFF && itdev->timing10)
+ it821x_program_udma(ap, adev, itdev->udma[unit]);
+ ata_bmdma_start(qc);
+}
+
+/**
+ * it821x_passthru_dma_stop - DMA stop callback
+ * @qc: ATA command
+ *
+ * We loaded new timings in dma_start, as a result we need to restore
+ * the PIO timings in dma_stop so that the next command issue gets the
+ * right clock values.
+ */
+
+static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct it821x_dev *itdev = ap->private_data;
+ int unit = adev->devno;
+
+ ata_bmdma_stop(qc);
+ if (itdev->mwdma[unit] != MWDMA_OFF)
+ it821x_program(ap, adev, itdev->pio[unit]);
+}
+
+
+/**
+ * it821x_passthru_dev_select - Select master/slave
+ * @ap: ATA port
+ * @device: Device number (not pointer)
+ *
+ * Device selection hook. If neccessary perform clock switching
+ */
+
+static void it821x_passthru_dev_select(struct ata_port *ap,
+ unsigned int device)
+{
+ struct it821x_dev *itdev = ap->private_data;
+ if (itdev && device != itdev->last_device) {
+ struct ata_device *adev = &ap->device[device];
+ it821x_program(ap, adev, itdev->pio[adev->devno]);
+ itdev->last_device = device;
+ }
+ ata_std_dev_select(ap, device);
+}
+
+/**
+ * it821x_smart_qc_issue_prot - wrap qc issue prot
+ * @qc: command
+ *
+ * Wrap the command issue sequence for the IT821x. We need to
+ * perform out own device selection timing loads before the
+ * usual happenings kick off
+ */
+
+static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ switch(qc->tf.command)
+ {
+ /* Commands the firmware supports */
+ case ATA_CMD_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ case ATA_CMD_PIO_READ:
+ case ATA_CMD_PIO_READ_EXT:
+ case ATA_CMD_PIO_WRITE:
+ case ATA_CMD_PIO_WRITE_EXT:
+ case ATA_CMD_READ_MULTI:
+ case ATA_CMD_READ_MULTI_EXT:
+ case ATA_CMD_WRITE_MULTI:
+ case ATA_CMD_WRITE_MULTI_EXT:
+ case ATA_CMD_ID_ATA:
+ /* Arguably should just no-op this one */
+ case ATA_CMD_SET_FEATURES:
+ return ata_qc_issue_prot(qc);
+ }
+ printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
+ return AC_ERR_INVALID;
+}
+
+/**
+ * it821x_passthru_qc_issue_prot - wrap qc issue prot
+ * @qc: command
+ *
+ * Wrap the command issue sequence for the IT821x. We need to
+ * perform out own device selection timing loads before the
+ * usual happenings kick off
+ */
+
+static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ it821x_passthru_dev_select(qc->ap, qc->dev->devno);
+ return ata_qc_issue_prot(qc);
+}
+
+/**
+ * it821x_smart_set_mode - mode setting
+ * @ap: interface to set up
+ *
+ * Use a non standard set_mode function. We don't want to be tuned.
+ * The BIOS configured everything. Our job is not to fiddle. We
+ * read the dma enabled bits from the PCI configuration of the device
+ * and respect them.
+ */
+
+static void it821x_smart_set_mode(struct ata_port *ap)
+{
+ int dma_enabled = 0;
+ int i;
+
+ /* Bits 5 and 6 indicate if DMA is active on master/slave */
+ /* It is possible that BMDMA isn't allocated */
+ if (ap->ioaddr.bmdma_addr)
+ dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ struct ata_device *dev = &ap->device[i];
+ if (ata_dev_enabled(dev)) {
+ /* We don't really care */
+ dev->pio_mode = XFER_PIO_0;
+ dev->dma_mode = XFER_MW_DMA_0;
+ /* We do need the right mode information for DMA or PIO
+ and this comes from the current configuration flags */
+ if (dma_enabled & (1 << (5 + i))) {
+ dev->xfer_mode = XFER_MW_DMA_0;
+ dev->xfer_shift = ATA_SHIFT_MWDMA;
+ dev->flags &= ~ATA_DFLAG_PIO;
+ } else {
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ }
+ }
+ }
+}
+
+/**
+ * it821x_dev_config - Called each device identify
+ * @ap: ATA port
+ * @adev: Device that has just been identified
+ *
+ * Perform the initial setup needed for each device that is chip
+ * special. In our case we need to lock the sector count to avoid
+ * blowing the brains out of the firmware with large LBA48 requests
+ *
+ * FIXME: When FUA appears we need to block FUA too. And SMART and
+ * basically we need to filter commands for this chip.
+ */
+
+static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned char model_num[40];
+ char *s;
+ unsigned int len;
+
+ /* This block ought to be a library routine as it is in several
+ drivers now */
+
+ ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS,
+ sizeof(model_num));
+ s = &model_num[0];
+ len = strnlen(s, sizeof(model_num));
+
+ /* ATAPI specifies that empty space is blank-filled; remove blanks */
+ while ((len > 0) && (s[len - 1] == ' ')) {
+ len--;
+ s[len] = 0;
+ }
+
+ if (adev->max_sectors > 255)
+ adev->max_sectors = 255;
+
+ if (strstr(model_num, "Integrated Technology Express")) {
+ /* RAID mode */
+ printk(KERN_INFO "IT821x %sRAID%d volume",
+ adev->id[147]?"Bootable ":"",
+ adev->id[129]);
+ if (adev->id[129] != 1)
+ printk("(%dK stripe)", adev->id[146]);
+ printk(".\n");
+ }
+}
+
+
+/**
+ * it821x_check_atapi_dma - ATAPI DMA handler
+ * @qc: Command we are about to issue
+ *
+ * Decide if this ATAPI command can be issued by DMA on this
+ * controller. Return 0 if it can be.
+ */
+
+static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct it821x_dev *itdev = ap->private_data;
+
+ /* No ATAPI DMA in smart mode */
+ if (itdev->smart)
+ return -EOPNOTSUPP;
+ /* No ATAPI DMA on rev 10 */
+ if (itdev->timing10)
+ return -EOPNOTSUPP;
+ /* Cool */
+ return 0;
+}
+
+
+/**
+ * it821x_port_start - port setup
+ * @ap: ATA port being set up
+ *
+ * The it821x needs to maintain private data structures and also to
+ * use the standard PCI interface which lacks support for this
+ * functionality. We instead set up the private data on the port
+ * start hook, and tear it down on port stop
+ */
+
+static int it821x_port_start(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct it821x_dev *itdev;
+ u8 conf;
+
+ int ret = ata_port_start(ap);
+ if (ret < 0)
+ return ret;
+
+ ap->private_data = kmalloc(sizeof(struct it821x_dev), GFP_KERNEL);
+ if (ap->private_data == NULL) {
+ ata_port_stop(ap);
+ return -ENOMEM;
+ }
+
+ itdev = ap->private_data;
+ memset(itdev, 0, sizeof(struct it821x_dev));
+
+ pci_read_config_byte(pdev, 0x50, &conf);
+
+ if (conf & 1) {
+ itdev->smart = 1;
+ /* Long I/O's although allowed in LBA48 space cause the
+ onboard firmware to enter the twighlight zone */
+ /* No ATAPI DMA in this mode either */
+ }
+ /* Pull the current clocks from 0x50 */
+ if (conf & (1 << (1 + ap->port_no)))
+ itdev->clock_mode = ATA_50;
+ else
+ itdev->clock_mode = ATA_66;
+
+ itdev->want[0][1] = ATA_ANY;
+ itdev->want[1][1] = ATA_ANY;
+ itdev->last_device = -1;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &conf);
+ if (conf == 0x10) {
+ itdev->timing10 = 1;
+ /* Need to disable ATAPI DMA for this case */
+ if (!itdev->smart)
+ printk(KERN_WARNING DRV_NAME": Revision 0x10, workarounds activated.\n");
+ }
+
+ return 0;
+}
+
+/**
+ * it821x_port_stop - port shutdown
+ * @ap: ATA port being removed
+ *
+ * Release the private objects we added in it821x_port_start
+ */
+
+static void it821x_port_stop(struct ata_port *ap) {
+ kfree(ap->private_data);
+ ap->private_data = NULL; /* We want an OOPS if we reuse this
+ too late! */
+ ata_port_stop(ap);
+}
+
+static struct scsi_host_template it821x_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ /* 255 sectors to begin with. This is locked in smart mode but not
+ in pass through */
+ .max_sectors = 255,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations it821x_smart_port_ops = {
+ .set_mode = it821x_smart_set_mode,
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .mode_filter = ata_pci_default_filter,
+
+ .check_status = ata_check_status,
+ .check_atapi_dma= it821x_check_atapi_dma,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .dev_config = it821x_dev_config,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = it821x_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = it821x_smart_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = it821x_port_start,
+ .port_stop = it821x_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static struct ata_port_operations it821x_passthru_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = it821x_passthru_set_piomode,
+ .set_dmamode = it821x_passthru_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .check_atapi_dma= it821x_check_atapi_dma,
+ .dev_select = it821x_passthru_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = it821x_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = it821x_passthru_bmdma_start,
+ .bmdma_stop = it821x_passthru_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = it821x_passthru_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_handler = ata_interrupt,
+
+ .port_start = it821x_port_start,
+ .port_stop = it821x_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static void __devinit it821x_disable_raid(struct pci_dev *pdev)
+{
+ /* Reset local CPU, and set BIOS not ready */
+ pci_write_config_byte(pdev, 0x5E, 0x01);
+
+ /* Set to bypass mode, and reset PCI bus */
+ pci_write_config_byte(pdev, 0x50, 0x00);
+ pci_write_config_word(pdev, PCI_COMMAND,
+ PCI_COMMAND_PARITY | PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ pci_write_config_word(pdev, 0x40, 0xA0F3);
+
+ pci_write_config_dword(pdev,0x4C, 0x02040204);
+ pci_write_config_byte(pdev, 0x42, 0x36);
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20);
+}
+
+
+static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ u8 conf;
+
+ static struct ata_port_info info_smart = {
+ .sht = &it821x_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .port_ops = &it821x_smart_port_ops
+ };
+ static struct ata_port_info info_passthru = {
+ .sht = &it821x_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7f,
+ .port_ops = &it821x_passthru_port_ops
+ };
+ static struct ata_port_info *port_info[2];
+
+ static char *mode[2] = { "pass through", "smart" };
+
+ /* Force the card into bypass mode if so requested */
+ if (it8212_noraid) {
+ printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
+ it821x_disable_raid(pdev);
+ }
+ pci_read_config_byte(pdev, 0x50, &conf);
+ conf &= 1;
+
+ printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
+ if (conf == 0)
+ port_info[0] = port_info[1] = &info_passthru;
+ else
+ port_info[0] = port_info[1] = &info_smart;
+
+ return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static struct pci_device_id it821x[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8211), },
+ { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212), },
+ { 0, },
+};
+
+static struct pci_driver it821x_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = it821x,
+ .probe = it821x_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init it821x_init(void)
+{
+ return pci_register_driver(&it821x_pci_driver);
+}
+
+
+static void __exit it821x_exit(void)
+{
+ pci_unregister_driver(&it821x_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for the IT8211/IT8212 IDE RAID controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, it821x);
+MODULE_VERSION(DRV_VERSION);
+
+
+module_param_named(noraid, it8212_noraid, int, S_IRUGO);
+MODULE_PARM_DESC(it8212_noraid, "Force card into bypass mode");
+
+module_init(it821x_init);
+module_exit(it821x_exit);