libata: implement and use ata_port_desc() to report port configuration

Currently, port configuration reporting has the following problems.

* iomapped address is reported instead of raw address
* report contains irrelevant fields or lacks necessary fields for
  non-SFF controllers.
* host->irq/irq2 are there just for reporting and hacky.

This patch implements and uses ata_port_desc() and
ata_port_pbar_desc().  ata_port_desc() is almost identical to
ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no
locking requirement, can only be used during host initialization and "
" is used as separator instead of ", ".  ata_port_pbar_desc() is a
helper to ease reporting of a PCI BAR or an offsetted address into it.

LLD pushes whatever description it wants using the above two
functions.  The accumulated description is printed on host
registration after "[S/P]ATA max MAX_XFERMODE ".

SFF init helpers and ata_host_activate() automatically add
descriptions for addresses and irq respectively, so only LLDs which
isn't standard SFF need to add custom descriptions.  In many cases,
such controllers need to report different things anyway.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 12 insertions, 5 deletions

diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 2141a99e4da1..f87c800be7f3 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -782,12 +782,14 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
 static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
+	static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 };
+	static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 };
 	unsigned int board_idx = (unsigned int) ent->driver_data;
 	const struct ata_port_info *ppi[] =
 		{ &pdc2027x_port_info[board_idx], NULL };
 	struct ata_host *host;
 	void __iomem *mmio_base;
-	int rc;
+	int i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -817,10 +819,15 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 
 	mmio_base = host->iomap[PDC_MMIO_BAR];
 
-	pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0);
-	host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000;
-	pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0);
-	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008;
+	for (i = 0; i < 2; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]);
+		ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i];
+
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd");
+	}
 
 	//pci_enable_intx(pdev);