[GFS2] Fix up merge of Linus' kernel into GFS2

This fixes up a couple of conflicts when merging up with
Linus' latest kernel. This will hopefully allow GFS2 to
be more easily merged into forthcoming -mm and FC kernels
due to the "one line per header" format now used for the
kernel headers.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Conflicts:

	include/linux/Kbuild
	include/linux/kernel.h

1 files changed, 381 insertions, 0 deletions

diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
new file mode 100644
index 000000000000..8f7db9638d0a
--- /dev/null
+++ b/drivers/ata/pata_sil680.c
@@ -0,0 +1,381 @@
+/*
+ * pata_sil680.c 	- SIL680 PATA for new ATA layer
+ *			  (C) 2005 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ * based upon
+ *
+ * linux/drivers/ide/pci/siimage.c		Version 1.07	Nov 30, 2003
+ *
+ * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003		Red Hat <alan@redhat.com>
+ *
+ *  May be copied or modified under the terms of the GNU General Public License
+ *
+ *  Documentation publically available.
+ *
+ *	If you have strange problems with nVidia chipset systems please
+ *	see the SI support documentation and update your system BIOS
+ *	if neccessary
+ *
+ * TODO
+ *	If we know all our devices are LBA28 (or LBA28 sized)  we could use
+ *	the command fifo mode.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_sil680"
+#define DRV_VERSION "0.3.2"
+
+/**
+ *	sil680_selreg		-	return register base
+ *	@hwif: interface
+ *	@r: config offset
+ *
+ *	Turn a config register offset into the right address in either
+ *	PCI space or MMIO space to access the control register in question
+ *	Thankfully this is a configuration operation so isnt performance
+ *	criticial.
+ */
+
+static unsigned long sil680_selreg(struct ata_port *ap, int r)
+{
+	unsigned long base = 0xA0 + r;
+	base += (ap->port_no << 4);
+	return base;
+}
+
+/**
+ *	sil680_seldev		-	return register base
+ *	@hwif: interface
+ *	@r: config offset
+ *
+ *	Turn a config register offset into the right address in either
+ *	PCI space or MMIO space to access the control register in question
+ *	including accounting for the unit shift.
+ */
+
+static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
+{
+	unsigned long base = 0xA0 + r;
+	base += (ap->port_no << 4);
+	base |= adev->devno ? 2 : 0;
+	return base;
+}
+
+
+/**
+ *	sil680_cable_detect	-	cable detection
+ *	@ap: ATA port
+ *
+ *	Perform cable detection. The SIL680 stores this in PCI config
+ *	space for us.
+ */
+
+static int sil680_cable_detect(struct ata_port *ap) {
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	unsigned long addr = sil680_selreg(ap, 0);
+	u8 ata66;
+	pci_read_config_byte(pdev, addr, &ata66);
+	if (ata66 & 1)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+static int sil680_pre_reset(struct ata_port *ap)
+{
+	ap->cbl = sil680_cable_detect(ap);
+	return ata_std_prereset(ap);
+}
+
+/**
+ *	sil680_bus_reset	-	reset the SIL680 bus
+ *	@ap: ATA port to reset
+ *
+ *	Perform the SIL680 housekeeping when doing an ATA bus reset
+ */
+
+static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	unsigned long addr = sil680_selreg(ap, 0);
+	u8 reset;
+
+	pci_read_config_byte(pdev, addr, &reset);
+	pci_write_config_byte(pdev, addr, reset | 0x03);
+	udelay(25);
+	pci_write_config_byte(pdev, addr, reset);
+	return ata_std_softreset(ap, classes);
+}
+
+static void sil680_error_handler(struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, sil680_pre_reset, sil680_bus_reset, NULL, ata_std_postreset);
+}
+
+/**
+ *	sil680_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Program the SIL680 registers for PIO mode. Note that the task speed
+ *	registers are shared between the devices so we must pick the lowest
+ *	mode for command work.
+ */
+
+static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
+	static u16 speed_t[5] = { 0x328A, 0x1281, 0x1281, 0x10C3, 0x10C1 };
+
+	unsigned long tfaddr = sil680_selreg(ap, 0x02);
+	unsigned long addr = sil680_seldev(ap, adev, 0x04);
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int pio = adev->pio_mode - XFER_PIO_0;
+	int lowest_pio = pio;
+	u16 reg;
+
+	struct ata_device *pair = ata_dev_pair(adev);
+
+	if (pair != NULL && adev->pio_mode > pair->pio_mode)
+		lowest_pio = pair->pio_mode - XFER_PIO_0;
+
+	pci_write_config_word(pdev, addr, speed_p[pio]);
+	pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
+
+	pci_read_config_word(pdev, tfaddr-2, &reg);
+	reg &= ~0x0200;			/* Clear IORDY */
+	if (ata_pio_need_iordy(adev))
+		reg |= 0x0200;		/* Enable IORDY */
+	pci_write_config_word(pdev, tfaddr-2, reg);
+}
+
+/**
+ *	sil680_set_dmamode	-	set initial DMA mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Program the MWDMA/UDMA modes for the sil680 k
+ *	chipset. The MWDMA mode values are pulled from a lookup table
+ *	while the chipset uses mode number for UDMA.
+ */
+
+static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	static u8 ultra_table[2][7] = {
+		{ 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF },	/* 100MHz */
+		{ 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 },	/* 133Mhz */
+	};
+	static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	unsigned long ma = sil680_seldev(ap, adev, 0x08);
+	unsigned long ua = sil680_seldev(ap, adev, 0x0C);
+	unsigned long addr_mask = 0x80 + 4 * ap->port_no;
+	int port_shift = adev->devno * 4;
+	u8 scsc, mode;
+	u16 multi, ultra;
+
+	pci_read_config_byte(pdev, 0x8A, &scsc);
+	pci_read_config_byte(pdev, addr_mask, &mode);
+	pci_read_config_word(pdev, ma, &multi);
+	pci_read_config_word(pdev, ua, &ultra);
+
+	/* Mask timing bits */
+	ultra &= ~0x3F;
+	mode &= ~(0x03 << port_shift);
+
+	/* Extract scsc */
+	scsc = (scsc & 0x30) ? 1: 0;
+
+	if (adev->dma_mode >= XFER_UDMA_0) {
+		multi = 0x10C1;
+		ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
+		mode |= (0x03 << port_shift);
+	} else {
+		multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
+		mode |= (0x02 << port_shift);
+	}
+	pci_write_config_byte(pdev, addr_mask, mode);
+	pci_write_config_word(pdev, ma, multi);
+	pci_write_config_word(pdev, ua, ultra);
+}
+
+static struct scsi_host_template sil680_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations sil680_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= sil680_set_piomode,
+	.set_dmamode	= sil680_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= sil680_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info = {
+		.sht = &sil680_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x7f,
+		.port_ops = &sil680_port_ops
+	};
+	static struct ata_port_info info_slow = {
+		.sht = &sil680_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x3f,
+		.port_ops = &sil680_port_ops
+	};
+	static struct ata_port_info *port_info[2] = {&info, &info};
+	static int printed_version;
+	u32 class_rev	= 0;
+	u8 tmpbyte	= 0;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+        pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
+        class_rev &= 0xff;
+        /* FIXME: double check */
+	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
+
+	pci_write_config_byte(pdev, 0x80, 0x00);
+	pci_write_config_byte(pdev, 0x84, 0x00);
+
+	pci_read_config_byte(pdev, 0x8A, &tmpbyte);
+
+	printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
+			tmpbyte & 1, tmpbyte & 0x30);
+
+	switch(tmpbyte & 0x30) {
+		case 0x00:
+			/* 133 clock attempt to force it on */
+			pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
+			break;
+		case 0x30:
+			/* if clocking is disabled */
+			/* 133 clock attempt to force it on */
+			pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
+			break;
+		case 0x10:
+			/* 133 already */
+			break;
+		case 0x20:
+			/* BIOS set PCI x2 clocking */
+			break;
+	}
+
+	pci_read_config_byte(pdev,   0x8A, &tmpbyte);
+	printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
+			tmpbyte & 1, tmpbyte & 0x30);
+	if ((tmpbyte & 0x30) == 0)
+		port_info[0] = port_info[1] = &info_slow;
+
+	pci_write_config_byte(pdev,  0xA1, 0x72);
+	pci_write_config_word(pdev,  0xA2, 0x328A);
+	pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
+	pci_write_config_dword(pdev, 0xA8, 0x43924392);
+	pci_write_config_dword(pdev, 0xAC, 0x40094009);
+	pci_write_config_byte(pdev,  0xB1, 0x72);
+	pci_write_config_word(pdev,  0xB2, 0x328A);
+	pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
+	pci_write_config_dword(pdev, 0xB8, 0x43924392);
+	pci_write_config_dword(pdev, 0xBC, 0x40094009);
+
+	switch(tmpbyte & 0x30) {
+		case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
+		case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
+		case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
+		/* This last case is _NOT_ ok */
+		case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
+			return -EIO;
+	}
+	return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static const struct pci_device_id sil680[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), },
+	{ 0, },
+};
+
+static struct pci_driver sil680_pci_driver = {
+        .name 		= DRV_NAME,
+	.id_table	= sil680,
+	.probe 		= sil680_init_one,
+	.remove		= ata_pci_remove_one
+};
+
+static int __init sil680_init(void)
+{
+	return pci_register_driver(&sil680_pci_driver);
+}
+
+
+static void __exit sil680_exit(void)
+{
+	pci_unregister_driver(&sil680_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for SI680 PATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sil680);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(sil680_init);
+module_exit(sil680_exit);