Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - Numerous minor fixes, cleanups etc.

 - More EEH work from Gavin to remove its dependency on device_nodes.

 - Memory hotplug implemented entirely in the kernel from Nathan
   Fontenot.

 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.

 - Rewrite of VPHN parsing logic & tests from Greg Kurz.

 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.

 - Support for pstore on powernv from Hari Bathini.

 - Removal of old powerpc specific byte swap routines by David Gibson.

 - Fix from Vasant Hegde to prevent the flash driver telling you it was
   flashing your firmware when it wasn't.

 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.

 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
   Stancek.

 - Some fixes for migration from Tyrel Datwyler.

 - A new syscall to switch the cpu endian by Michael Ellerman.

 - Large series from Wei Yang to implement SRIOV, reviewed and acked by
   Bjorn.

 - A fix for the OPAL sensor driver from Cédric Le Goater.

 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.

 - Large series from Daniel Axtens to make our PCI hooks per PHB rather
   than per machine.

 - Small patch from Sam Bobroff to explicitly abort non-suspended
   transactions on syscalls, plus a test to exercise it.

 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.

 - Small patch to enable the hard lockup detector from Anton Blanchard.

 - Fix from Dave Olson for missing L2 cache information on some CPUs.

 - Some fixes from Michael Ellerman to get Cell machines booting again.

 - Freescale updates from Scott: Highlights include BMan device tree
   nodes, an MSI erratum workaround, a couple minor performance
   improvements, config updates, and misc fixes/cleanup.

* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
  powerpc/powermac: Fix build error seen with powermac smp builds
  powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
  powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
  powerpc/cell: Fix iommu breakage caused by controller_ops change
  powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
  powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
  powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
  powerpc/pseries: Correct memory hotplug locking
  powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
  powerpc: Add ppc64 hard lockup detector support
  oprofile: Disable oprofile NMI timer on ppc64
  powerpc/perf/hv-24x7: Add missing put_cpu_var()
  powerpc/perf/hv-24x7: Break up single_24x7_request
  powerpc/perf/hv-24x7: Define update_event_count()
  powerpc/perf/hv-24x7: Whitespace cleanup
  powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
  powerpc/perf/hv-24x7: Rename hv_24x7_event_update
  powerpc/perf/hv-24x7: Move debug prints to separate function
  powerpc/perf/hv-24x7: Drop event_24x7_request()
  powerpc/perf/hv-24x7: Use pr_devel() to log message
  ...

Conflicts:
	tools/testing/selftests/powerpc/Makefile
	tools/testing/selftests/powerpc/tm/Makefile

2 files changed, 6 insertions, 15 deletions

diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index a02f76fdcfcd..b0028588ff1c 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -540,9 +540,9 @@ static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
 			BUG_ON (pi++ >= MAX_DCMDS);
 
 			len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG;
-			st_le16(&table->command, write ? OUTPUT_MORE: INPUT_MORE);
-			st_le16(&table->req_count, len);
-			st_le32(&table->phy_addr, addr);
+			table->command = cpu_to_le16(write ? OUTPUT_MORE: INPUT_MORE);
+			table->req_count = cpu_to_le16(len);
+			table->phy_addr = cpu_to_le32(addr);
 			table->cmd_dep = 0;
 			table->xfer_status = 0;
 			table->res_count = 0;
@@ -557,12 +557,12 @@ static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
 
 	/* Convert the last command to an input/output */
 	table--;
-	st_le16(&table->command, write ? OUTPUT_LAST: INPUT_LAST);
+	table->command = cpu_to_le16(write ? OUTPUT_LAST: INPUT_LAST);
 	table++;
 
 	/* Add the stop command to the end of the list */
 	memset(table, 0, sizeof(struct dbdma_cmd));
-	st_le16(&table->command, DBDMA_STOP);
+	table->command = cpu_to_le16(DBDMA_STOP);
 
 	dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi);
 }
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index ff8307b30ff0..ff614be55d0f 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -47,11 +47,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi.h>
 #include <linux/libata.h>
-
-#ifdef CONFIG_PPC_OF
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#endif /* CONFIG_PPC_OF */
+#include <linux/of.h>
 
 #define DRV_NAME	"sata_svw"
 #define DRV_VERSION	"2.3"
@@ -320,7 +316,6 @@ static u8 k2_stat_check_status(struct ata_port *ap)
 	return readl(ap->ioaddr.status_addr);
 }
 
-#ifdef CONFIG_PPC_OF
 static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost)
 {
 	struct ata_port *ap;
@@ -350,14 +345,10 @@ static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost)
 	}
 	return 0;
 }
-#endif /* CONFIG_PPC_OF */
-
 
 static struct scsi_host_template k2_sata_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
-#ifdef CONFIG_PPC_OF
 	.show_info		= k2_sata_show_info,
-#endif
 };