Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block

* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.

1 files changed, 124 insertions, 11 deletions

diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index c5d411174db0..ae340ffc8f81 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -25,7 +25,7 @@ struct access_method {
 	void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
 	void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
 	unsigned long (*fifo_full)(ctlr_info_t *h);
-	unsigned long (*intr_pending)(ctlr_info_t *h);
+	bool (*intr_pending)(ctlr_info_t *h);
 	unsigned long (*command_completed)(ctlr_info_t *h);
 };
 typedef struct _drive_info_struct
@@ -85,8 +85,8 @@ struct ctlr_info
 	int	max_cmd_sgentries;
 	SGDescriptor_struct **cmd_sg_list;
 
-#	define DOORBELL_INT	0
-#	define PERF_MODE_INT	1
+#	define PERF_MODE_INT	0
+#	define DOORBELL_INT	1
 #	define SIMPLE_MODE_INT	2
 #	define MEMQ_MODE_INT	3
 	unsigned int intr[4];
@@ -137,10 +137,27 @@ struct ctlr_info
 	struct list_head scan_list;
 	struct completion scan_wait;
 	struct device dev;
+	/*
+	 * Performant mode tables.
+	 */
+	u32 trans_support;
+	u32 trans_offset;
+	struct TransTable_struct *transtable;
+	unsigned long transMethod;
+
+	/*
+	 * Performant mode completion buffer
+	 */
+	u64 *reply_pool;
+	dma_addr_t reply_pool_dhandle;
+	u64 *reply_pool_head;
+	size_t reply_pool_size;
+	unsigned char reply_pool_wraparound;
+	u32 *blockFetchTable;
 };
 
-/*  Defining the diffent access_menthods */
-/*
+/*  Defining the diffent access_methods
+ *
  * Memory mapped FIFO interface (SMART 53xx cards)
  */
 #define SA5_DOORBELL	0x20
@@ -159,19 +176,47 @@ struct ctlr_info
 #define SA5B_INTR_PENDING	0x04
 #define FIFO_EMPTY		0xffffffff	
 #define CCISS_FIRMWARE_READY	0xffff0000 /* value in scratchpad register */
+/* Perf. mode flags */
+#define SA5_PERF_INTR_PENDING	0x04
+#define SA5_PERF_INTR_OFF	0x05
+#define SA5_OUTDB_STATUS_PERF_BIT	0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT	0x01
+#define SA5_OUTDB_CLEAR         0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT        0x01
+#define SA5_OUTDB_STATUS        0x9C
+
 
 #define  CISS_ERROR_BIT		0x02
 
 #define CCISS_INTR_ON 	1 
 #define CCISS_INTR_OFF	0
+
+
+/* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds.  CCISS_BOARD_READY_ITERATIONS is derived
+ * the above.
+ */
+#define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define CCISS_BOARD_READY_ITERATIONS \
+	((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
+		CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_POST_RESET_PAUSE_MSECS (3000)
+#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
+#define CCISS_POST_RESET_NOOP_RETRIES (12)
+
 /* 
 	Send the command to the hardware 
 */
 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c) 
 {
 #ifdef CCISS_DEBUG
-	 printk("Sending %x - down to controller\n", c->busaddr );
-#endif /* CCISS_DEBUG */ 
+	printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
+			h->ctlr, c->busaddr);
+#endif /* CCISS_DEBUG */
          writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 	 h->commands_outstanding++;
 	 if ( h->commands_outstanding > h->max_outstanding)
@@ -214,6 +259,20 @@ static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
         }
 }
+
+/* Performant mode intr_mask */
+static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+	if (val) { /* turn on interrupts */
+		h->interrupts_enabled = 1;
+		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	} else {
+		h->interrupts_enabled = 0;
+		writel(SA5_PERF_INTR_OFF,
+				h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	}
+}
+
 /*
  *  Returns true if fifo is full.  
  * 
@@ -250,10 +309,44 @@ static unsigned long SA5_completed(ctlr_info_t *h)
 	return ( register_value); 
 
 }
+
+/* Performant mode command completed */
+static unsigned long SA5_performant_completed(ctlr_info_t *h)
+{
+	unsigned long register_value = FIFO_EMPTY;
+
+	/* flush the controller write of the reply queue by reading
+	 * outbound doorbell status register.
+	 */
+	register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+	/* msi auto clears the interrupt pending bit. */
+	if (!(h->msi_vector || h->msix_vector)) {
+		writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+		/* Do a read in order to flush the write to the controller
+		 * (as per spec.)
+		 */
+		register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+	}
+
+	if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+		register_value = *(h->reply_pool_head);
+		(h->reply_pool_head)++;
+		h->commands_outstanding--;
+	} else {
+		register_value = FIFO_EMPTY;
+	}
+	/* Check for wraparound */
+	if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+		h->reply_pool_head = h->reply_pool;
+		h->reply_pool_wraparound ^= 1;
+	}
+
+	return register_value;
+}
 /*
  *	Returns true if an interrupt is pending.. 
  */
-static unsigned long SA5_intr_pending(ctlr_info_t *h)
+static bool SA5_intr_pending(ctlr_info_t *h)
 {
 	unsigned long register_value  = 
 		readl(h->vaddr + SA5_INTR_STATUS);
@@ -268,7 +361,7 @@ static unsigned long SA5_intr_pending(ctlr_info_t *h)
 /*
  *      Returns true if an interrupt is pending..
  */
-static unsigned long SA5B_intr_pending(ctlr_info_t *h)
+static bool SA5B_intr_pending(ctlr_info_t *h)
 {
         unsigned long register_value  =
                 readl(h->vaddr + SA5_INTR_STATUS);
@@ -280,6 +373,20 @@ static unsigned long SA5B_intr_pending(ctlr_info_t *h)
         return 0 ;
 }
 
+static bool SA5_performant_intr_pending(ctlr_info_t *h)
+{
+	unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+	if (!register_value)
+		return false;
+
+	if (h->msi_vector || h->msix_vector)
+		return true;
+
+	/* Read outbound doorbell to flush */
+	register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+	return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
 
 static struct access_method SA5_access = {
 	SA5_submit_command,
@@ -297,6 +404,14 @@ static struct access_method SA5B_access = {
         SA5_completed,
 };
 
+static struct access_method SA5_performant_access = {
+	SA5_submit_command,
+	SA5_performant_intr_mask,
+	SA5_fifo_full,
+	SA5_performant_intr_pending,
+	SA5_performant_completed,
+};
+
 struct board_type {
 	__u32	board_id;
 	char	*product_name;
@@ -304,6 +419,4 @@ struct board_type {
 	int nr_cmds; /* Max cmds this kind of ctlr can handle. */
 };
 
-#define CCISS_LOCK(i)	(&hba[i]->lock)
-
 #endif /* CCISS_H */