Merge branch 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next

Alex writes:
Pretty minor -next pull request.  We some additional new bits waiting
internally for release.  Hopefully Monday we can get at least some of
them out.  The others will probably take a few more weeks.

Highlights of the current request:
- ELD registers for passing audio information to the sound hardware
- Handle GPUVM page faults more gracefully
- Misc fixes

Merge radeon test
* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux: (483 commits)
  drm/radeon: bump driver version for new info ioctl requests
  drm/radeon: fix eDP clk and lane setup for scaled modes
  drm/radeon: add new INFO ioctl requests
  drm/radeon/dce32+: use fractional fb dividers for high clocks
  drm/radeon: use cached memory when evicting for vram on non agp
  drm/radeon: add a CS flag END_OF_FRAME
  drm/radeon: stop page faults from hanging the system (v2)
  drm/radeon/dce4/5: add registers for ELD handling
  drm/radeon/dce3.2: add registers for ELD handling
  radeon: fix pll/ctrc mapping on dce2 and dce3 hardware
  Linux 3.7-rc7
  powerpc/eeh: Do not invalidate PE properly
  Revert "drm/i915: enable rc6 on ilk again"
  ALSA: hda - Fix build without CONFIG_PM
  of/address: sparc: Declare of_iomap as an extern function for sparc again
  PM / QoS: fix wrong error-checking condition
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  ...

Conflicts:
	drivers/gpu/drm/exynos/exynos_drm_encoder.c
	drivers/gpu/drm/exynos/exynos_drm_fbdev.c
	drivers/gpu/drm/nouveau/core/engine/disp/nv50.c

1 files changed, 12 insertions, 6 deletions

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index adc6f36564cf..9694dd99bbbc 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -559,7 +559,7 @@ static void mtip_timeout_function(unsigned long int data)
 	struct mtip_cmd *command;
 	int tag, cmdto_cnt = 0;
 	unsigned int bit, group;
-	unsigned int num_command_slots = port->dd->slot_groups * 32;
+	unsigned int num_command_slots;
 	unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
 
 	if (unlikely(!port))
@@ -572,6 +572,7 @@ static void mtip_timeout_function(unsigned long int data)
 	}
 	/* clear the tag accumulator */
 	memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+	num_command_slots = port->dd->slot_groups * 32;
 
 	for (tag = 0; tag < num_command_slots; tag++) {
 		/*
@@ -2218,8 +2219,8 @@ static int exec_drive_taskfile(struct driver_data *dd,
 		fis.device);
 
 	/* check for erase mode support during secure erase.*/
-	if ((fis.command == ATA_CMD_SEC_ERASE_UNIT)
-					&& (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
+	if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf &&
+					(outbuf[0] & MTIP_SEC_ERASE_MODE)) {
 		erasemode = 1;
 	}
 
@@ -2439,7 +2440,7 @@ static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd,
  * return value
  *	None
  */
-static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
+static void mtip_hw_submit_io(struct driver_data *dd, sector_t sector,
 			      int nsect, int nents, int tag, void *callback,
 			      void *data, int dir)
 {
@@ -2447,6 +2448,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
 	struct mtip_port *port = dd->port;
 	struct mtip_cmd *command = &port->commands[tag];
 	int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	u64 start = sector;
 
 	/* Map the scatter list for DMA access */
 	nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
@@ -2465,8 +2467,12 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
 	fis->opts        = 1 << 7;
 	fis->command     =
 		(dir == READ ? ATA_CMD_FPDMA_READ : ATA_CMD_FPDMA_WRITE);
-	*((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF);
-	*((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF);
+	fis->lba_low     = start & 0xFF;
+	fis->lba_mid     = (start >> 8) & 0xFF;
+	fis->lba_hi      = (start >> 16) & 0xFF;
+	fis->lba_low_ex  = (start >> 24) & 0xFF;
+	fis->lba_mid_ex  = (start >> 32) & 0xFF;
+	fis->lba_hi_ex   = (start >> 40) & 0xFF;
 	fis->device	 = 1 << 6;
 	fis->features    = nsect & 0xFF;
 	fis->features_ex = (nsect >> 8) & 0xFF;