summaryrefslogtreecommitdiff
path: root/drivers/block/mtip32xx
diff options
context:
space:
mode:
authorAsai Thambi S P <asamymuthupa@micron.com>2013-04-03 19:53:07 +0530
committerJens Axboe <axboe@kernel.dk>2013-04-03 21:54:01 +0200
commitd0d096b1d8b97172cee953f1a00b7d4379d398da (patch)
tree9e47917fa7477960c5c239f88188ab45732bfbfe /drivers/block/mtip32xx
parentc678ef5286ddb5cf70384ad5af286b0afc9b73e1 (diff)
mtip32xx: recovery from command timeout
To recover from command timeouts, reset the device. In addition to that improved timeout handling of PIO commands. Signed-off-by: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'drivers/block/mtip32xx')
-rw-r--r--drivers/block/mtip32xx/mtip32xx.c177
1 files changed, 87 insertions, 90 deletions
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 92250af84e7d..30f233634650 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -243,40 +243,31 @@ static inline void release_slot(struct mtip_port *port, int tag)
/*
* Reset the HBA (without sleeping)
*
- * Just like hba_reset, except does not call sleep, so can be
- * run from interrupt/tasklet context.
- *
* @dd Pointer to the driver data structure.
*
* return value
* 0 The reset was successful.
* -1 The HBA Reset bit did not clear.
*/
-static int hba_reset_nosleep(struct driver_data *dd)
+static int mtip_hba_reset(struct driver_data *dd)
{
unsigned long timeout;
- /* Chip quirk: quiesce any chip function */
- mdelay(10);
-
/* Set the reset bit */
writel(HOST_RESET, dd->mmio + HOST_CTL);
/* Flush */
readl(dd->mmio + HOST_CTL);
- /*
- * Wait 10ms then spin for up to 1 second
- * waiting for reset acknowledgement
- */
- timeout = jiffies + msecs_to_jiffies(1000);
- mdelay(10);
- while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
- && time_before(jiffies, timeout))
- mdelay(1);
+ /* Spin for up to 2 seconds, waiting for reset acknowledgement */
+ timeout = jiffies + msecs_to_jiffies(2000);
+ do {
+ mdelay(10);
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
+ return -1;
- if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
- return -1;
+ } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
+ && time_before(jiffies, timeout));
if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
return -1;
@@ -481,7 +472,7 @@ static void mtip_restart_port(struct mtip_port *port)
dev_warn(&port->dd->pdev->dev,
"PxCMD.CR not clear, escalating reset\n");
- if (hba_reset_nosleep(port->dd))
+ if (mtip_hba_reset(port->dd))
dev_err(&port->dd->pdev->dev,
"HBA reset escalation failed.\n");
@@ -527,6 +518,26 @@ static void mtip_restart_port(struct mtip_port *port)
}
+static int mtip_device_reset(struct driver_data *dd)
+{
+ int rv = 0;
+
+ if (mtip_check_surprise_removal(dd->pdev))
+ return 0;
+
+ if (mtip_hba_reset(dd) < 0)
+ rv = -EFAULT;
+
+ mdelay(1);
+ mtip_init_port(dd->port);
+ mtip_start_port(dd->port);
+
+ /* Enable interrupts on the HBA. */
+ writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN,
+ dd->mmio + HOST_CTL);
+ return rv;
+}
+
/*
* Helper function for tag logging
*/
@@ -632,7 +643,7 @@ static void mtip_timeout_function(unsigned long int data)
if (cmdto_cnt) {
print_tags(port->dd, "timed out", tagaccum, cmdto_cnt);
if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
- mtip_restart_port(port);
+ mtip_device_reset(port->dd);
wake_up_interruptible(&port->svc_wait);
}
clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
@@ -1283,11 +1294,11 @@ static int mtip_exec_internal_command(struct mtip_port *port,
int rv = 0, ready2go = 1;
struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL];
unsigned long to;
+ struct driver_data *dd = port->dd;
/* Make sure the buffer is 8 byte aligned. This is asic specific. */
if (buffer & 0x00000007) {
- dev_err(&port->dd->pdev->dev,
- "SG buffer is not 8 byte aligned\n");
+ dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n");
return -EFAULT;
}
@@ -1300,23 +1311,21 @@ static int mtip_exec_internal_command(struct mtip_port *port,
mdelay(100);
} while (time_before(jiffies, to));
if (!ready2go) {
- dev_warn(&port->dd->pdev->dev,
+ dev_warn(&dd->pdev->dev,
"Internal cmd active. new cmd [%02X]\n", fis->command);
return -EBUSY;
}
set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
port->ic_pause_timer = 0;
- if (fis->command == ATA_CMD_SEC_ERASE_UNIT)
- clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
- else if (fis->command == ATA_CMD_DOWNLOAD_MICRO)
- clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
if (atomic == GFP_KERNEL) {
if (fis->command != ATA_CMD_STANDBYNOW1) {
/* wait for io to complete if non atomic */
if (mtip_quiesce_io(port, 5000) < 0) {
- dev_warn(&port->dd->pdev->dev,
+ dev_warn(&dd->pdev->dev,
"Failed to quiesce IO\n");
release_slot(port, MTIP_TAG_INTERNAL);
clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
@@ -1361,58 +1370,84 @@ static int mtip_exec_internal_command(struct mtip_port *port,
/* Issue the command to the hardware */
mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL);
- /* Poll if atomic, wait_for_completion otherwise */
if (atomic == GFP_KERNEL) {
/* Wait for the command to complete or timeout. */
- if (wait_for_completion_timeout(
+ if (wait_for_completion_interruptible_timeout(
&wait,
- msecs_to_jiffies(timeout)) == 0) {
- dev_err(&port->dd->pdev->dev,
- "Internal command did not complete [%d] "
- "within timeout of %lu ms\n",
- atomic, timeout);
- if (mtip_check_surprise_removal(port->dd->pdev) ||
+ msecs_to_jiffies(timeout)) <= 0) {
+ if (rv == -ERESTARTSYS) { /* interrupted */
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] was interrupted after %lu ms\n",
+ fis->command, timeout);
+ rv = -EINTR;
+ goto exec_ic_exit;
+ } else if (rv == 0) /* timeout */
+ dev_err(&dd->pdev->dev,
+ "Internal command did not complete [%02X] within timeout of %lu ms\n",
+ fis->command, timeout);
+ else
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] wait returned code [%d] after %lu ms - unhandled\n",
+ fis->command, rv, timeout);
+
+ if (mtip_check_surprise_removal(dd->pdev) ||
test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
- &port->dd->dd_flag)) {
+ &dd->dd_flag)) {
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] wait returned due to SR\n",
+ fis->command);
rv = -ENXIO;
goto exec_ic_exit;
}
+ mtip_device_reset(dd); /* recover from timeout issue */
rv = -EAGAIN;
+ goto exec_ic_exit;
}
} else {
+ u32 hba_stat, port_stat;
+
/* Spin for <timeout> checking if command still outstanding */
timeout = jiffies + msecs_to_jiffies(timeout);
while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL])
& (1 << MTIP_TAG_INTERNAL))
&& time_before(jiffies, timeout)) {
- if (mtip_check_surprise_removal(port->dd->pdev)) {
+ if (mtip_check_surprise_removal(dd->pdev)) {
rv = -ENXIO;
goto exec_ic_exit;
}
if ((fis->command != ATA_CMD_STANDBYNOW1) &&
test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
- &port->dd->dd_flag)) {
+ &dd->dd_flag)) {
rv = -ENXIO;
goto exec_ic_exit;
}
- if (readl(port->mmio + PORT_IRQ_STAT) & PORT_IRQ_ERR) {
- atomic_inc(&int_cmd->active); /* error */
- break;
+ port_stat = readl(port->mmio + PORT_IRQ_STAT);
+ if (!port_stat)
+ continue;
+
+ if (port_stat & PORT_IRQ_ERR) {
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] failed\n",
+ fis->command);
+ mtip_device_reset(dd);
+ rv = -EIO;
+ goto exec_ic_exit;
+ } else {
+ writel(port_stat, port->mmio + PORT_IRQ_STAT);
+ hba_stat = readl(dd->mmio + HOST_IRQ_STAT);
+ if (hba_stat)
+ writel(hba_stat,
+ dd->mmio + HOST_IRQ_STAT);
}
+ break;
}
}
- if (atomic_read(&int_cmd->active) > 1) {
- dev_err(&port->dd->pdev->dev,
- "Internal command [%02X] failed\n", fis->command);
- rv = -EIO;
- }
if (readl(port->cmd_issue[MTIP_TAG_INTERNAL])
& (1 << MTIP_TAG_INTERNAL)) {
rv = -ENXIO;
- if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
- &port->dd->dd_flag)) {
- mtip_restart_port(port);
+ if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) {
+ mtip_device_reset(dd);
rv = -EAGAIN;
}
}
@@ -1724,7 +1759,8 @@ static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
* -EINVAL Invalid parameters passed in, trim not supported
* -EIO Error submitting trim request to hw
*/
-static int mtip_send_trim(struct driver_data *dd, unsigned int lba, unsigned int len)
+static int mtip_send_trim(struct driver_data *dd, unsigned int lba,
+ unsigned int len)
{
int i, rv = 0;
u64 tlba, tlen, sect_left;
@@ -1811,45 +1847,6 @@ static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors)
}
/*
- * Reset the HBA.
- *
- * Resets the HBA by setting the HBA Reset bit in the Global
- * HBA Control register. After setting the HBA Reset bit the
- * function waits for 1 second before reading the HBA Reset
- * bit to make sure it has cleared. If HBA Reset is not clear
- * an error is returned. Cannot be used in non-blockable
- * context.
- *
- * @dd Pointer to the driver data structure.
- *
- * return value
- * 0 The reset was successful.
- * -1 The HBA Reset bit did not clear.
- */
-static int mtip_hba_reset(struct driver_data *dd)
-{
- mtip_deinit_port(dd->port);
-
- /* Set the reset bit */
- writel(HOST_RESET, dd->mmio + HOST_CTL);
-
- /* Flush */
- readl(dd->mmio + HOST_CTL);
-
- /* Wait for reset to clear */
- ssleep(1);
-
- /* Check the bit has cleared */
- if (readl(dd->mmio + HOST_CTL) & HOST_RESET) {
- dev_err(&dd->pdev->dev,
- "Reset bit did not clear.\n");
- return -1;
- }
-
- return 0;
-}
-
-/*
* Display the identify command data.
*
* @port Pointer to the port data structure.