Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...

8 files changed, 122 insertions, 136 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index dceb85f8d9a8..106d1d8e16ad 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -83,6 +83,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3005) },
 	{ USB_DEVICE(0x04CA, 0x3006) },
 	{ USB_DEVICE(0x04CA, 0x3008) },
+	{ USB_DEVICE(0x04CA, 0x300b) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0CF3, 0xE005) },
@@ -97,6 +98,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402) },
 	{ USB_DEVICE(0x0cf3, 0x3121) },
 	{ USB_DEVICE(0x0cf3, 0xe003) },
+	{ USB_DEVICE(0x0489, 0xe05f) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +128,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
@@ -140,6 +143,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index f9d183387f45..7399303d7d99 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -23,8 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <net/bluetooth/bluetooth.h>
-#include <linux/ctype.h>
-#include <linux/firmware.h>
 
 #define BTM_HEADER_LEN			4
 #define BTM_UPLD_SIZE			2312
@@ -43,8 +41,6 @@ struct btmrvl_thread {
 struct btmrvl_device {
 	void *card;
 	struct hci_dev *hcidev;
-	struct device *dev;
-	const char *cal_data;
 
 	u8 dev_type;
 
@@ -90,12 +86,12 @@ struct btmrvl_private {
 
 #define MRVL_VENDOR_PKT			0xFE
 
-/* Bluetooth commands  */
-#define BT_CMD_AUTO_SLEEP_MODE		0x23
-#define BT_CMD_HOST_SLEEP_CONFIG	0x59
-#define BT_CMD_HOST_SLEEP_ENABLE	0x5A
-#define BT_CMD_MODULE_CFG_REQ		0x5B
-#define BT_CMD_LOAD_CONFIG_DATA		0x61
+/* Vendor specific Bluetooth commands */
+#define BT_CMD_AUTO_SLEEP_MODE		0xFC23
+#define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
+#define BT_CMD_HOST_SLEEP_ENABLE	0xFC5A
+#define BT_CMD_MODULE_CFG_REQ		0xFC5B
+#define BT_CMD_LOAD_CONFIG_DATA		0xFC61
 
 /* Sub-commands: Module Bringup/Shutdown Request/Response */
 #define MODULE_BRINGUP_REQ		0xF1
@@ -104,6 +100,11 @@ struct btmrvl_private {
 
 #define MODULE_SHUTDOWN_REQ		0xF2
 
+/* Vendor specific Bluetooth events */
+#define BT_EVENT_AUTO_SLEEP_MODE	0x23
+#define BT_EVENT_HOST_SLEEP_CONFIG	0x59
+#define BT_EVENT_HOST_SLEEP_ENABLE	0x5A
+#define BT_EVENT_MODULE_CFG_REQ		0x5B
 #define BT_EVENT_POWER_STATE		0x20
 
 /* Bluetooth Power States */
@@ -111,8 +112,6 @@ struct btmrvl_private {
 #define BT_PS_DISABLE			0x03
 #define BT_PS_SLEEP			0x01
 
-#define OGF				0x3F
-
 /* Host Sleep states */
 #define HS_ACTIVATED			0x01
 #define HS_DEACTIVATED			0x00
@@ -121,7 +120,7 @@ struct btmrvl_private {
 #define PS_SLEEP			0x01
 #define PS_AWAKE			0x00
 
-#define BT_CMD_DATA_SIZE		32
+#define BT_CAL_HDR_LEN			4
 #define BT_CAL_DATA_SIZE		28
 
 struct btmrvl_event {
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 5cf31c4fe6d1..1e0320af00c6 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -19,7 +19,7 @@
  **/
 
 #include <linux/module.h>
-
+#include <linux/of.h>
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
@@ -50,12 +50,10 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 
 	if (hdr->evt == HCI_EV_CMD_COMPLETE) {
 		struct hci_ev_cmd_complete *ec;
-		u16 opcode, ocf, ogf;
+		u16 opcode;
 
 		ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
 		opcode = __le16_to_cpu(ec->opcode);
-		ocf = hci_opcode_ocf(opcode);
-		ogf = hci_opcode_ogf(opcode);
 
 		if (priv->btmrvl_dev.sendcmdflag) {
 			priv->btmrvl_dev.sendcmdflag = false;
@@ -63,9 +61,8 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 			wake_up_interruptible(&priv->adapter->cmd_wait_q);
 		}
 
-		if (ogf == OGF) {
-			BT_DBG("vendor event skipped: ogf 0x%4.4x ocf 0x%4.4x",
-			       ogf, ocf);
+		if (hci_opcode_ogf(opcode) == 0x3F) {
+			BT_DBG("vendor event skipped: opcode=%#4.4x", opcode);
 			kfree_skb(skb);
 			return false;
 		}
@@ -89,7 +86,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 	}
 
 	switch (event->data[0]) {
-	case BT_CMD_AUTO_SLEEP_MODE:
+	case BT_EVENT_AUTO_SLEEP_MODE:
 		if (!event->data[2]) {
 			if (event->data[1] == BT_PS_ENABLE)
 				adapter->psmode = 1;
@@ -102,7 +99,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 		}
 		break;
 
-	case BT_CMD_HOST_SLEEP_CONFIG:
+	case BT_EVENT_HOST_SLEEP_CONFIG:
 		if (!event->data[3])
 			BT_DBG("gpio=%x, gap=%x", event->data[1],
 							event->data[2]);
@@ -110,7 +107,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 			BT_DBG("HSCFG command failed");
 		break;
 
-	case BT_CMD_HOST_SLEEP_ENABLE:
+	case BT_EVENT_HOST_SLEEP_ENABLE:
 		if (!event->data[1]) {
 			adapter->hs_state = HS_ACTIVATED;
 			if (adapter->psmode)
@@ -121,7 +118,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 		}
 		break;
 
-	case BT_CMD_MODULE_CFG_REQ:
+	case BT_EVENT_MODULE_CFG_REQ:
 		if (priv->btmrvl_dev.sendcmdflag &&
 				event->data[1] == MODULE_BRINGUP_REQ) {
 			BT_DBG("EVENT:%s",
@@ -166,7 +163,7 @@ exit:
 }
 EXPORT_SYMBOL_GPL(btmrvl_process_event);
 
-static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
+static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 opcode,
 				const void *param, u8 len)
 {
 	struct sk_buff *skb;
@@ -179,7 +176,7 @@ static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
 	}
 
 	hdr = (struct hci_command_hdr *)skb_put(skb, HCI_COMMAND_HDR_SIZE);
-	hdr->opcode = cpu_to_le16(hci_opcode_pack(OGF, cmd_no));
+	hdr->opcode = cpu_to_le16(opcode);
 	hdr->plen = len;
 
 	if (len)
@@ -417,127 +414,62 @@ static int btmrvl_open(struct hci_dev *hdev)
 	return 0;
 }
 
-/*
- * This function parses provided calibration data input. It should contain
- * hex bytes separated by space or new line character. Here is an example.
- * 00 1C 01 37 FF FF FF FF 02 04 7F 01
- * CE BA 00 00 00 2D C6 C0 00 00 00 00
- * 00 F0 00 00
- */
-static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
+static int btmrvl_download_cal_data(struct btmrvl_private *priv,
+				    u8 *data, int len)
 {
-	const u8 *s = src;
-	u8 *d = dst;
 	int ret;
-	u8 tmp[3];
-
-	tmp[2] = '\0';
-	while ((s - src) <= len - 2) {
-		if (isspace(*s)) {
-			s++;
-			continue;
-		}
-
-		if (isxdigit(*s)) {
-			if ((d - dst) >= dst_size) {
-				BT_ERR("calibration data file too big!!!");
-				return -EINVAL;
-			}
-
-			memcpy(tmp, s, 2);
-
-			ret = kstrtou8(tmp, 16, d++);
-			if (ret < 0)
-				return ret;
-
-			s += 2;
-		} else {
-			return -EINVAL;
-		}
-	}
-	if (d == dst)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int btmrvl_load_cal_data(struct btmrvl_private *priv,
-				u8 *config_data)
-{
-	int i, ret;
-	u8 data[BT_CMD_DATA_SIZE];
 
 	data[0] = 0x00;
 	data[1] = 0x00;
 	data[2] = 0x00;
-	data[3] = BT_CMD_DATA_SIZE - 4;
-
-	/* Swap cal-data bytes. Each four bytes are swapped. Considering 4
-	 * byte SDIO header offset, mapping of input and output bytes will be
-	 * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},
-	 * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */
-	for (i = 4; i < BT_CMD_DATA_SIZE; i++)
-		data[i] = config_data[(i / 4) * 8 - 1 - i];
+	data[3] = len;
 
 	print_hex_dump_bytes("Calibration data: ",
-			     DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);
+			     DUMP_PREFIX_OFFSET, data, BT_CAL_HDR_LEN + len);
 
 	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
-				   BT_CMD_DATA_SIZE);
+				   BT_CAL_HDR_LEN + len);
 	if (ret)
 		BT_ERR("Failed to download caibration data\n");
 
 	return 0;
 }
 
-static int
-btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+static int btmrvl_cal_data_dt(struct btmrvl_private *priv)
 {
-	u8 cal_data[BT_CAL_DATA_SIZE];
+	struct device_node *dt_node;
+	u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
+	const char name[] = "btmrvl_caldata";
+	const char property[] = "btmrvl,caldata";
 	int ret;
 
-	ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+	dt_node = of_find_node_by_name(NULL, name);
+	if (!dt_node)
+		return -ENODEV;
+
+	ret = of_property_read_u8_array(dt_node, property,
+					cal_data + BT_CAL_HDR_LEN,
+					BT_CAL_DATA_SIZE);
 	if (ret)
 		return ret;
 
-	ret = btmrvl_load_cal_data(priv, cal_data);
+	BT_DBG("Use cal data from device tree");
+	ret = btmrvl_download_cal_data(priv, cal_data, BT_CAL_DATA_SIZE);
 	if (ret) {
-		BT_ERR("Fail to load calibrate data");
+		BT_ERR("Fail to download calibrate data");
 		return ret;
 	}
 
 	return 0;
 }
 
-static int btmrvl_cal_data_config(struct btmrvl_private *priv)
-{
-	const struct firmware *cfg;
-	int ret;
-	const char *cal_data = priv->btmrvl_dev.cal_data;
-
-	if (!cal_data)
-		return 0;
-
-	ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
-	if (ret < 0) {
-		BT_DBG("Failed to get %s file, skipping cal data download",
-		       cal_data);
-		return 0;
-	}
-
-	ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
-	release_firmware(cfg);
-	return ret;
-}
-
 static int btmrvl_setup(struct hci_dev *hdev)
 {
 	struct btmrvl_private *priv = hci_get_drvdata(hdev);
 
 	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
 
-	if (btmrvl_cal_data_config(priv))
-		BT_ERR("Set cal data failed");
+	btmrvl_cal_data_dt(priv);
 
 	priv->btmrvl_dev.psmode = 1;
 	btmrvl_enable_ps(priv);
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index fabcf5bb48af..1b52c9f5230d 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -18,6 +18,7 @@
  * this warranty disclaimer.
  **/
 
+#include <linux/firmware.h>
 #include <linux/slab.h>
 
 #include <linux/mmc/sdio_ids.h>
@@ -101,7 +102,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
@@ -109,7 +109,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -117,7 +116,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8797_uapsta.bin",
-	.cal_data	= "mrvl/sd8797_caldata.conf",
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -125,7 +123,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8897_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_88xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -1007,7 +1004,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 		struct btmrvl_sdio_device *data = (void *) id->driver_data;
 		card->helper = data->helper;
 		card->firmware = data->firmware;
-		card->cal_data = data->cal_data;
 		card->reg = data->reg;
 		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
 	}
@@ -1036,8 +1032,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 	}
 
 	card->priv = priv;
-	priv->btmrvl_dev.dev = &card->func->dev;
-	priv->btmrvl_dev.cal_data = card->cal_data;
 
 	/* Initialize the interface specific function pointers */
 	priv->hw_host_to_card = btmrvl_sdio_host_to_card;
@@ -1220,5 +1214,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
 MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8797_caldata.conf");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 6872d9ecac07..43d35a609ca9 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -85,7 +85,6 @@ struct btmrvl_sdio_card {
 	u32 ioport;
 	const char *helper;
 	const char *firmware;
-	const char *cal_data;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
@@ -95,7 +94,6 @@ struct btmrvl_sdio_card {
 struct btmrvl_sdio_device {
 	const char *helper;
 	const char *firmware;
-	const char *cal_data;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 };
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index b61440aaee65..83f6437dd91d 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -73,6 +73,7 @@ struct btsdio_data {
 #define REG_CL_INTRD 0x13	/* Interrupt Clear */
 #define REG_EN_INTRD 0x14	/* Interrupt Enable */
 #define REG_MD_STAT  0x20	/* Bluetooth Mode Status */
+#define REG_MD_SET   0x20	/* Bluetooth Mode Set */
 
 static int btsdio_tx_packet(struct btsdio_data *data, struct sk_buff *skb)
 {
@@ -212,7 +213,7 @@ static int btsdio_open(struct hci_dev *hdev)
 	}
 
 	if (data->func->class == SDIO_CLASS_BT_B)
-		sdio_writeb(data->func, 0x00, REG_MD_STAT, NULL);
+		sdio_writeb(data->func, 0x00, REG_MD_SET, NULL);
 
 	sdio_writeb(data->func, 0x01, REG_EN_INTRD, NULL);
 
@@ -333,6 +334,9 @@ static int btsdio_probe(struct sdio_func *func,
 	hdev->flush    = btsdio_flush;
 	hdev->send     = btsdio_send_frame;
 
+	if (func->vendor == 0x0104 && func->device == 0x00c5)
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
 	err = hci_register_dev(hdev);
 	if (err < 0) {
 		hci_free_dev(hdev);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3980fd18f6ea..baeaaed299e4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -150,6 +150,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
@@ -164,6 +165,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -224,6 +226,7 @@ static const struct usb_device_id blacklist_table[] = {
 
 	/* Intel Bluetooth device */
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
+	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
 
 	{ }	/* Terminating entry */
 };
@@ -962,6 +965,45 @@ static int btusb_setup_bcm92035(struct hci_dev *hdev)
 	return 0;
 }
 
+static int btusb_setup_csr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_local_version *rp;
+	struct sk_buff *skb;
+	int ret;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("Reading local version failed (%ld)", -PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+
+	rp = (struct hci_rp_read_local_version *) skb->data;
+
+	if (!rp->status) {
+		if (le16_to_cpu(rp->manufacturer) != 10) {
+			/* Clear the reset quirk since this is not an actual
+			 * early Bluetooth 1.1 device from CSR.
+			 */
+			clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+			/* These fake CSR controllers have all a broken
+			 * stored link key handling and so just disable it.
+			 */
+			set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
+				&hdev->quirks);
+		}
+	}
+
+	ret = -bt_to_errno(rp->status);
+
+	kfree_skb(skb);
+
+	return ret;
+}
+
 struct intel_version {
 	u8 status;
 	u8 hw_platform;
@@ -1436,8 +1478,10 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_BCM92035)
 		hdev->setup = btusb_setup_bcm92035;
 
-	if (id->driver_info & BTUSB_INTEL)
+	if (id->driver_info & BTUSB_INTEL) {
+		usb_enable_autosuspend(data->udev);
 		hdev->setup = btusb_setup_intel;
+	}
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1460,10 +1504,15 @@ static int btusb_probe(struct usb_interface *intf,
 
 	if (id->driver_info & BTUSB_CSR) {
 		struct usb_device *udev = data->udev;
+		u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
 
 		/* Old firmware would otherwise execute USB reset */
-		if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117)
+		if (bcdDevice < 0x117)
 			set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+		/* Fake CSR devices with broken commands */
+		if (bcdDevice <= 0x100)
+			hdev->setup = btusb_setup_csr;
 	}
 
 	if (id->driver_info & BTUSB_SNIFFER) {
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 7b167385a1c4..1ef6990a5c7e 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -141,22 +141,28 @@ static int vhci_create_device(struct vhci_data *data, __u8 dev_type)
 }
 
 static inline ssize_t vhci_get_user(struct vhci_data *data,
-				    const char __user *buf, size_t count)
+				    const struct iovec *iov,
+				    unsigned long count)
 {
+	size_t len = iov_length(iov, count);
 	struct sk_buff *skb;
 	__u8 pkt_type, dev_type;
+	unsigned long i;
 	int ret;
 
-	if (count < 2 || count > HCI_MAX_FRAME_SIZE)
+	if (len < 2 || len > HCI_MAX_FRAME_SIZE)
 		return -EINVAL;
 
-	skb = bt_skb_alloc(count, GFP_KERNEL);
+	skb = bt_skb_alloc(len, GFP_KERNEL);
 	if (!skb)
 		return -ENOMEM;
 
-	if (copy_from_user(skb_put(skb, count), buf, count)) {
-		kfree_skb(skb);
-		return -EFAULT;
+	for (i = 0; i < count; i++) {
+		if (copy_from_user(skb_put(skb, iov[i].iov_len),
+				   iov[i].iov_base, iov[i].iov_len)) {
+			kfree_skb(skb);
+			return -EFAULT;
+		}
 	}
 
 	pkt_type = *((__u8 *) skb->data);
@@ -205,7 +211,7 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
 		return -EINVAL;
 	}
 
-	return (ret < 0) ? ret : count;
+	return (ret < 0) ? ret : len;
 }
 
 static inline ssize_t vhci_put_user(struct vhci_data *data,
@@ -272,12 +278,13 @@ static ssize_t vhci_read(struct file *file,
 	return ret;
 }
 
-static ssize_t vhci_write(struct file *file,
-			  const char __user *buf, size_t count, loff_t *pos)
+static ssize_t vhci_write(struct kiocb *iocb, const struct iovec *iov,
+			  unsigned long count, loff_t pos)
 {
+	struct file *file = iocb->ki_filp;
 	struct vhci_data *data = file->private_data;
 
-	return vhci_get_user(data, buf, count);
+	return vhci_get_user(data, iov, count);
 }
 
 static unsigned int vhci_poll(struct file *file, poll_table *wait)
@@ -342,7 +349,7 @@ static int vhci_release(struct inode *inode, struct file *file)
 static const struct file_operations vhci_fops = {
 	.owner		= THIS_MODULE,
 	.read		= vhci_read,
-	.write		= vhci_write,
+	.aio_write	= vhci_write,
 	.poll		= vhci_poll,
 	.open		= vhci_open,
 	.release	= vhci_release,