Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 334 insertions, 0 deletions

diff --git a/drivers/char/rio/daemon.h b/drivers/char/rio/daemon.h
new file mode 100644
index 000000000000..62dba0e68b3e
--- /dev/null
+++ b/drivers/char/rio/daemon.h
@@ -0,0 +1,334 @@
+/*
+** -----------------------------------------------------------------------------
+**
+**  Perle Specialix driver for Linux
+**  Ported from existing RIO Driver for SCO sources.
+ *
+ *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**	Module		: daemon.h
+**	SID		: 1.3
+**	Last Modified	: 11/6/98 11:34:09
+**	Retrieved	: 11/6/98 11:34:21
+**
+**  ident @(#)daemon.h	1.3
+**
+** -----------------------------------------------------------------------------
+*/
+
+#ifndef	__rio_daemon_h__
+#define	__rio_daemon_h__
+
+#ifdef SCCS_LABELS
+#ifndef lint
+static char *_daemon_h_sccs_ = "@(#)daemon.h	1.3";
+#endif
+#endif
+
+
+/*
+** structures used on /dev/rio
+*/
+
+struct Error
+{
+	uint	Error;
+	uint	Entry;
+	uint	Other;
+};
+
+struct DownLoad
+{
+	char	*DataP;
+	uint	Count;
+	uint	ProductCode;
+};
+
+/*
+** A few constants....
+*/
+#ifndef MAX_VERSION_LEN
+#define	MAX_VERSION_LEN	256
+#endif
+
+#ifndef MAX_XP_CTRL_LEN
+#define	MAX_XP_CTRL_LEN 16		/* ALSO IN PORT.H */
+#endif
+
+struct	PortSetup
+{
+	uint	From;	/* Set/Clear XP & IXANY Control from this port.... */
+	uint	To;	/* .... to this port */
+	uint	XpCps;			/* at this speed */
+	char	XpOn[MAX_XP_CTRL_LEN];	/* this is the start string */
+	char	XpOff[MAX_XP_CTRL_LEN];	/* this is the stop string */
+	uchar	IxAny;			/* enable/disable IXANY */
+	uchar	IxOn;			/* enable/disable IXON */
+	uchar	Lock;			/* lock port params */
+	uchar	Store;			/* store params across closes */
+	uchar	Drain;			/* close only when drained */
+};
+
+struct	LpbReq
+{
+	uint	Host;
+	uint	Link;
+	struct  LPB     *LpbP;
+};
+
+struct	RupReq
+{
+	uint	HostNum;
+	uint	RupNum;
+	struct  RUP 	*RupP;
+};
+
+struct	PortReq
+{
+	uint	SysPort;
+	struct  Port 	*PortP;
+};
+
+struct  StreamInfo
+{
+	uint	SysPort;
+#if 0
+	queue_t RQueue;
+	queue_t WQueue;
+#else
+	int RQueue;
+	int WQueue;
+#endif
+};
+
+struct	HostReq
+{
+	uint	HostNum;
+	struct  Host 	*HostP;
+};
+
+struct	HostDpRam
+{
+	uint	HostNum;
+	struct	DpRam	*DpRamP;
+};
+
+struct	DebugCtrl
+{
+	uint	SysPort;
+	uint	Debug;
+	uint	Wait;
+};
+
+struct	MapInfo
+{
+	uint	FirstPort;	/* 8 ports, starting from this (tty) number */
+	uint	RtaUnique;	/* reside on this RTA (unique number) */
+};
+
+struct	MapIn
+{
+	uint	NumEntries;		/* How many port sets are we mapping? */
+	struct  MapInfo	*MapInfoP;	/* Pointer to (user space) info */
+};
+
+struct  SendPack
+{
+        unsigned int	PortNum;
+	unsigned char	Len;
+	unsigned char	Data[PKT_MAX_DATA_LEN];
+};
+
+struct SpecialRupCmd
+{
+	struct	PKT		Packet;
+	unsigned short	Host;
+	unsigned short	RupNum;
+};
+
+struct	IdentifyRta
+{
+	ulong	RtaUnique;
+	uchar	ID;
+};
+
+struct	KillNeighbour
+{
+	ulong	UniqueNum;
+	uchar	Link;
+};
+
+struct rioVersion {
+    char        version[MAX_VERSION_LEN];
+    char        relid[MAX_VERSION_LEN];
+    int         buildLevel;
+    char        buildDate[MAX_VERSION_LEN];
+};
+
+
+/*
+**	RIOC commands are for the daemon type operations
+**
+** 09.12.1998 ARG - ESIL 0776 part fix
+** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a
+** #ifndef here first.
+** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now
+** allowed to be used by customers.
+*/
+#ifndef RIOC
+#define	RIOC	('R'<<8)|('i'<<16)|('o'<<24)
+#endif
+
+/*
+** Boot stuff
+*/
+#define	RIO_GET_TABLE     (RIOC | 100)
+#define RIO_PUT_TABLE     (RIOC | 101)
+#define RIO_ASSIGN_RTA    (RIOC | 102)
+#define RIO_DELETE_RTA    (RIOC | 103)
+#define	RIO_HOST_FOAD	  (RIOC | 104)
+#define	RIO_QUICK_CHECK	  (RIOC | 105)
+#define RIO_SIGNALS_ON    (RIOC | 106)
+#define RIO_SIGNALS_OFF   (RIOC | 107)
+#define	RIO_CHANGE_NAME   (RIOC | 108)
+#define RIO_DOWNLOAD      (RIOC | 109)
+#define	RIO_GET_LOG	  (RIOC | 110)
+#define	RIO_SETUP_PORTS   (RIOC | 111)
+#define RIO_ALL_MODEM     (RIOC | 112)
+
+/*
+** card state, debug stuff
+*/
+#define	RIO_NUM_HOSTS	  (RIOC | 120)
+#define	RIO_HOST_LPB	  (RIOC | 121)
+#define	RIO_HOST_RUP	  (RIOC | 122)
+#define	RIO_HOST_PORT	  (RIOC | 123)
+#define	RIO_PARMS 	  (RIOC | 124)
+#define RIO_HOST_REQ	  (RIOC | 125)
+#define	RIO_READ_CONFIG	  (RIOC | 126)
+#define	RIO_SET_CONFIG	  (RIOC | 127)
+#define	RIO_VERSID	  (RIOC | 128)
+#define	RIO_FLAGS	  (RIOC | 129)
+#define	RIO_SETDEBUG	  (RIOC | 130)
+#define	RIO_GETDEBUG	  (RIOC | 131)
+#define	RIO_READ_LEVELS   (RIOC | 132)
+#define	RIO_SET_FAST_BUS  (RIOC | 133)
+#define	RIO_SET_SLOW_BUS  (RIOC | 134)
+#define	RIO_SET_BYTE_MODE (RIOC | 135)
+#define	RIO_SET_WORD_MODE (RIOC | 136)
+#define RIO_STREAM_INFO   (RIOC | 137)
+#define	RIO_START_POLLER  (RIOC | 138)
+#define	RIO_STOP_POLLER   (RIOC | 139)
+#define	RIO_LAST_ERROR    (RIOC | 140)
+#define	RIO_TICK	  (RIOC | 141)
+#define	RIO_TOCK	  (RIOC | 241)	/* I did this on purpose, you know. */
+#define	RIO_SEND_PACKET   (RIOC | 142)
+#define	RIO_SET_BUSY	  (RIOC | 143)
+#define	SPECIAL_RUP_CMD   (RIOC | 144)
+#define	RIO_FOAD_RTA      (RIOC | 145)
+#define	RIO_ZOMBIE_RTA    (RIOC | 146)
+#define RIO_IDENTIFY_RTA  (RIOC | 147)
+#define RIO_KILL_NEIGHBOUR (RIOC | 148)
+#define RIO_DEBUG_MEM     (RIOC | 149)
+/*
+** 150 - 167 used.....   See below
+*/
+#define RIO_GET_PORT_SETUP (RIOC | 168)
+#define RIO_RESUME        (RIOC | 169)
+#define	RIO_MESG	(RIOC | 170)
+#define	RIO_NO_MESG	(RIOC | 171)
+#define	RIO_WHAT_MESG	(RIOC | 172)
+#define RIO_HOST_DPRAM	(RIOC | 173)
+#define RIO_MAP_B50_TO_50	(RIOC | 174)
+#define RIO_MAP_B50_TO_57600	(RIOC | 175)
+#define RIO_MAP_B110_TO_110	(RIOC | 176)
+#define RIO_MAP_B110_TO_115200	(RIOC | 177)
+#define RIO_GET_PORT_PARAMS	(RIOC | 178)
+#define RIO_SET_PORT_PARAMS	(RIOC | 179)
+#define RIO_GET_PORT_TTY	(RIOC | 180)
+#define RIO_SET_PORT_TTY	(RIOC | 181)
+#define RIO_SYSLOG_ONLY	(RIOC | 182)
+#define RIO_SYSLOG_CONS	(RIOC | 183)
+#define RIO_CONS_ONLY	(RIOC | 184)
+#define RIO_BLOCK_OPENS	(RIOC | 185)
+
+/*
+** 02.03.1999 ARG - ESIL 0820 fix :
+** RIOBootMode is no longer use by the driver, so these ioctls
+** are now obsolete :
+**
+#define RIO_GET_BOOT_MODE	(RIOC | 186)
+#define RIO_SET_BOOT_MODE	(RIOC | 187)
+**
+*/
+
+#define RIO_MEM_DUMP	(RIOC | 189)
+#define RIO_READ_REGISTER	(RIOC | 190)
+#define RIO_GET_MODTYPE	(RIOC | 191)
+#define RIO_SET_TIMER	(RIOC | 192)
+#define RIO_READ_CHECK	(RIOC | 196)
+#define RIO_WAITING_FOR_RESTART	(RIOC | 197)
+#define RIO_BIND_RTA	(RIOC | 198)
+#define RIO_GET_BINDINGS	(RIOC | 199)
+#define RIO_PUT_BINDINGS	(RIOC | 200)
+
+#define	RIO_MAKE_DEV		(RIOC | 201)
+#define	RIO_MINOR		(RIOC | 202)
+
+#define	RIO_IDENTIFY_DRIVER	(RIOC | 203)
+#define	RIO_DISPLAY_HOST_CFG	(RIOC | 204)
+
+
+/*
+** MAKE_DEV / MINOR stuff
+*/
+#define	RIO_DEV_DIRECT		0x0000
+#define	RIO_DEV_MODEM		0x0200
+#define	RIO_DEV_XPRINT		0x0400
+#define	RIO_DEV_MASK		0x0600
+
+/*
+** port management, xprint stuff
+*/
+#define	rIOCN(N)	(RIOC|(N))
+#define	rIOCR(N,T)	(RIOC|(N))
+#define	rIOCW(N,T)	(RIOC|(N))
+
+#define	RIO_GET_XP_ON     rIOCR(150,char[16])	/* start xprint string */
+#define	RIO_SET_XP_ON     rIOCW(151,char[16])
+#define	RIO_GET_XP_OFF    rIOCR(152,char[16])	/* finish xprint string */
+#define	RIO_SET_XP_OFF    rIOCW(153,char[16])
+#define	RIO_GET_XP_CPS    rIOCR(154,int)	/* xprint CPS */
+#define	RIO_SET_XP_CPS    rIOCW(155,int)
+#define RIO_GET_IXANY     rIOCR(156,int)	/* ixany allowed? */
+#define RIO_SET_IXANY     rIOCW(157,int)
+#define RIO_SET_IXANY_ON  rIOCN(158)		/* allow ixany */
+#define RIO_SET_IXANY_OFF rIOCN(159)		/* disallow ixany */
+#define RIO_GET_MODEM     rIOCR(160,int)	/* port is modem/direct line? */
+#define RIO_SET_MODEM     rIOCW(161,int)
+#define RIO_SET_MODEM_ON  rIOCN(162)		/* port is a modem */
+#define RIO_SET_MODEM_OFF rIOCN(163)		/* port is direct */
+#define RIO_GET_IXON      rIOCR(164,int)	/* ixon allowed? */
+#define RIO_SET_IXON      rIOCW(165,int)
+#define RIO_SET_IXON_ON   rIOCN(166)		/* allow ixon */
+#define RIO_SET_IXON_OFF  rIOCN(167)		/* disallow ixon */
+
+#define RIO_GET_SIVIEW	  ((('s')<<8) | 106)	/* backwards compatible with SI */
+
+#define	RIO_IOCTL_UNKNOWN	-2
+
+#endif