clk: tegra: pll: Add code to handle if resets are supported by PLL

If a PLL has a reset_reg specified, properly handle that in the
enable/disable logic paths.

Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Bill Huang <bilhuang@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

1 files changed, 12 insertions, 0 deletions

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index fb3e3f67586c..c645a899deba 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -311,6 +311,12 @@ static void _clk_pll_enable(struct clk_hw *hw)
 		udelay(2);
 	}
 
+	if (pll->params->reset_reg) {
+		val = pll_readl(pll->params->reset_reg, pll);
+		val &= ~BIT(pll->params->reset_bit_idx);
+		pll_writel(val, pll->params->reset_reg, pll);
+	}
+
 	clk_pll_enable_lock(pll);
 
 	val = pll_readl_base(pll);
@@ -343,6 +349,12 @@ static void _clk_pll_disable(struct clk_hw *hw)
 		writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE);
 	}
 
+	if (pll->params->reset_reg) {
+		val = pll_readl(pll->params->reset_reg, pll);
+		val |= BIT(pll->params->reset_bit_idx);
+		pll_writel(val, pll->params->reset_reg, pll);
+	}
+
 	if (pll->params->iddq_reg) {
 		val = pll_readl(pll->params->iddq_reg, pll);
 		val |= BIT(pll->params->iddq_bit_idx);