[PATCH] Time: i386 Clocksource Drivers

Implement the time sources for i386 (acpi_pm, cyclone, hpet, pit, and tsc).
With this patch, the conversion of the i386 arch to the generic timekeeping
code should be complete.

The patch should be fairly straight forward, only adding the new clocksources.

[hirofumi@mail.parknet.co.jp: acpi_pm cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

3 files changed, 298 insertions, 0 deletions

diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
new file mode 100644
index 000000000000..be3511a308c0
--- /dev/null
+++ b/drivers/clocksource/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
+obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
new file mode 100644
index 000000000000..a0e5cde2fa71
--- /dev/null
+++ b/drivers/clocksource/acpi_pm.c
@@ -0,0 +1,177 @@
+/*
+ * linux/drivers/clocksource/acpi_pm.c
+ *
+ * This file contains the ACPI PM based clocksource.
+ *
+ * This code was largely moved from the i386 timer_pm.c file
+ * which was (C) Dominik Brodowski <linux@brodo.de> 2003
+ * and contained the following comments:
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+/* Number of PMTMR ticks expected during calibration run */
+#define PMTMR_TICKS_PER_SEC 3579545
+
+/*
+ * The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/acpi/boot.c
+ */
+u32 pmtmr_ioport;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+static inline u32 read_pmtmr(void)
+{
+	/* mask the output to 24 bits */
+	return inl(pmtmr_ioport) & ACPI_PM_MASK;
+}
+
+static cycle_t acpi_pm_read_verified(void)
+{
+	u32 v1 = 0, v2 = 0, v3 = 0;
+
+	/*
+	 * It has been reported that because of various broken
+	 * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM clock
+	 * source is not latched, so you must read it multiple
+	 * times to ensure a safe value is read:
+	 */
+	do {
+		v1 = read_pmtmr();
+		v2 = read_pmtmr();
+		v3 = read_pmtmr();
+	} while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+			|| (v3 > v1 && v3 < v2));
+
+	return (cycle_t)v2;
+}
+
+static cycle_t acpi_pm_read(void)
+{
+	return (cycle_t)read_pmtmr();
+}
+
+static struct clocksource clocksource_acpi_pm = {
+	.name		= "acpi_pm",
+	.rating		= 200,
+	.read		= acpi_pm_read,
+	.mask		= (cycle_t)ACPI_PM_MASK,
+	.mult		= 0, /*to be caluclated*/
+	.shift		= 22,
+	.is_continuous	= 1,
+};
+
+
+#ifdef CONFIG_PCI
+static int acpi_pm_good;
+static int __init acpi_pm_good_setup(char *__str)
+{
+       acpi_pm_good = 1;
+       return 1;
+}
+__setup("acpi_pm_good", acpi_pm_good_setup);
+
+static inline void acpi_pm_need_workaround(void)
+{
+	clocksource_acpi_pm.read = acpi_pm_read_verified;
+	clocksource_acpi_pm.rating = 110;
+}
+
+/*
+ * PIIX4 Errata:
+ *
+ * The power management timer may return improper results when read.
+ * Although the timer value settles properly after incrementing,
+ * while incrementing there is a 3 ns window every 69.8 ns where the
+ * timer value is indeterminate (a 4.2% chance that the data will be
+ * incorrect when read). As a result, the ACPI free running count up
+ * timer specification is violated due to erroneous reads.
+ */
+static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev)
+{
+	u8 rev;
+
+	if (acpi_pm_good)
+		return;
+
+	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+	/* the bug has been fixed in PIIX4M */
+	if (rev < 3) {
+		printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
+		       " Due to workarounds for a bug,\n"
+		       "* this clock source is slow. Consider trying"
+		       " other clock sources\n");
+
+		acpi_pm_need_workaround();
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
+			acpi_pm_check_blacklist);
+
+static void __devinit acpi_pm_check_graylist(struct pci_dev *dev)
+{
+	if (acpi_pm_good)
+		return;
+
+	printk(KERN_WARNING "* The chipset may have PM-Timer Bug. Due to"
+	       " workarounds for a bug,\n"
+	       "* this clock source is slow. If you are sure your timer"
+	       " does not have\n"
+	       "* this bug, please use \"acpi_pm_good\" to disable the"
+	       " workaround\n");
+
+	acpi_pm_need_workaround();
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+			acpi_pm_check_graylist);
+#endif
+
+
+static int __init init_acpi_pm_clocksource(void)
+{
+	u32 value1, value2;
+	unsigned int i;
+
+	if (!pmtmr_ioport)
+		return -ENODEV;
+
+	clocksource_acpi_pm.mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC,
+						clocksource_acpi_pm.shift);
+
+	/* "verify" this timing source: */
+	value1 = read_pmtmr();
+	for (i = 0; i < 10000; i++) {
+		value2 = read_pmtmr();
+		if (value2 == value1)
+			continue;
+		if (value2 > value1)
+			goto pm_good;
+		if ((value2 < value1) && ((value2) < 0xFFF))
+			goto pm_good;
+		printk(KERN_INFO "PM-Timer had inconsistent results:"
+			" 0x%#x, 0x%#x - aborting.\n", value1, value2);
+		return -EINVAL;
+	}
+	printk(KERN_INFO "PM-Timer had no reasonable result:"
+			" 0x%#x - aborting.\n", value1);
+	return -ENODEV;
+
+pm_good:
+	return register_clocksource(&clocksource_acpi_pm);
+}
+
+module_init(init_acpi_pm_clocksource);
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
new file mode 100644
index 000000000000..444eb11b9b4f
--- /dev/null
+++ b/drivers/clocksource/cyclone.c
@@ -0,0 +1,119 @@
+#include <linux/clocksource.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/timex.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+#include "mach_timer.h"
+
+#define CYCLONE_CBAR_ADDR	0xFEB00CD0	/* base address ptr */
+#define CYCLONE_PMCC_OFFSET	0x51A0		/* offset to control register */
+#define CYCLONE_MPCS_OFFSET	0x51A8		/* offset to select register */
+#define CYCLONE_MPMC_OFFSET	0x51D0		/* offset to count register */
+#define CYCLONE_TIMER_FREQ	99780000	/* 100Mhz, but not really */
+#define CYCLONE_TIMER_MASK	0xFFFFFFFF	/* 32 bit mask */
+
+int use_cyclone = 0;
+static void __iomem *cyclone_ptr;
+
+static cycle_t read_cyclone(void)
+{
+	return (cycle_t)readl(cyclone_ptr);
+}
+
+static struct clocksource clocksource_cyclone = {
+	.name		= "cyclone",
+	.rating		= 250,
+	.read		= read_cyclone,
+	.mask		= (cycle_t)CYCLONE_TIMER_MASK,
+	.mult		= 10,
+	.shift		= 0,
+	.is_continuous	= 1,
+};
+
+static int __init init_cyclone_clocksource(void)
+{
+	unsigned long base;	/* saved value from CBAR */
+	unsigned long offset;
+	u32 __iomem* volatile cyclone_timer;	/* Cyclone MPMC0 register */
+	u32 __iomem* reg;
+	int i;
+
+	/* make sure we're on a summit box: */
+	if (!use_cyclone)
+		return -ENODEV;
+
+	printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
+
+	/* find base address: */
+	offset = CYCLONE_CBAR_ADDR;
+	reg = ioremap_nocache(offset, sizeof(reg));
+	if (!reg) {
+		printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
+		return -ENODEV;
+	}
+	/* even on 64bit systems, this is only 32bits: */
+	base = readl(reg);
+	if (!base) {
+		printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
+		return -ENODEV;
+	}
+	iounmap(reg);
+
+	/* setup PMCC: */
+	offset = base + CYCLONE_PMCC_OFFSET;
+	reg = ioremap_nocache(offset, sizeof(reg));
+	if (!reg) {
+		printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
+		return -ENODEV;
+	}
+	writel(0x00000001,reg);
+	iounmap(reg);
+
+	/* setup MPCS: */
+	offset = base + CYCLONE_MPCS_OFFSET;
+	reg = ioremap_nocache(offset, sizeof(reg));
+	if (!reg) {
+		printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
+		return -ENODEV;
+	}
+	writel(0x00000001,reg);
+	iounmap(reg);
+
+	/* map in cyclone_timer: */
+	offset = base + CYCLONE_MPMC_OFFSET;
+	cyclone_timer = ioremap_nocache(offset, sizeof(u64));
+	if (!cyclone_timer) {
+		printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
+		return -ENODEV;
+	}
+
+	/* quick test to make sure its ticking: */
+	for (i = 0; i < 3; i++){
+		u32 old = readl(cyclone_timer);
+		int stall = 100;
+
+		while (stall--)
+			barrier();
+
+		if (readl(cyclone_timer) == old) {
+			printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
+			iounmap(cyclone_timer);
+			cyclone_timer = NULL;
+			return -ENODEV;
+		}
+	}
+	cyclone_ptr = cyclone_timer;
+
+	/* sort out mult/shift values: */
+	clocksource_cyclone.shift = 22;
+	clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
+						clocksource_cyclone.shift);
+
+	return register_clocksource(&clocksource_cyclone);
+}
+
+module_init(init_cyclone_clocksource);