diff options
author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2013-01-11 08:55:43 +0900 |
---|---|---|
committer | Chanwoo Choi <cw00.choi@samsung.com> | 2013-01-15 15:42:17 +0900 |
commit | 4f340333822de79b3439bddccdbf3846f9794e42 (patch) | |
tree | 03ef9d0ad533f531dce5ba38e79d3cb8ecb936b2 /drivers/extcon/extcon-arizona.c | |
parent | 92a49871b378b1e523a95da569cd38efdd06eee5 (diff) |
extcon: arizona: Enable basic headphone identification
Use the headphone detection to identify if the accessory is a headphone or
line load. There are two different revisions of the IP with different
register layouts, support both.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Diffstat (limited to 'drivers/extcon/extcon-arizona.c')
-rw-r--r-- | drivers/extcon/extcon-arizona.c | 341 |
1 files changed, 320 insertions, 21 deletions
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index b5190a811601..cc258a8842ef 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -31,8 +31,14 @@ #include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/registers.h> +#define ARIZONA_DEFAULT_HP 32 + #define ARIZONA_NUM_BUTTONS 6 +#define ARIZONA_ACCDET_MODE_MIC 0 +#define ARIZONA_ACCDET_MODE_HPL 1 +#define ARIZONA_ACCDET_MODE_HPR 2 + struct arizona_extcon_info { struct device *dev; struct arizona *arizona; @@ -47,10 +53,14 @@ struct arizona_extcon_info { bool micd_reva; bool micd_clamp; + bool hpdet_active; + bool mic; bool detecting; int jack_flips; + int hpdet_ip; + struct extcon_dev edev; }; @@ -74,11 +84,13 @@ static struct { #define ARIZONA_CABLE_MECHANICAL 0 #define ARIZONA_CABLE_MICROPHONE 1 #define ARIZONA_CABLE_HEADPHONE 2 +#define ARIZONA_CABLE_LINEOUT 3 static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", + "Line-out", NULL, }; @@ -100,6 +112,290 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); } +static struct { + unsigned int factor_a; + unsigned int factor_b; +} arizona_hpdet_b_ranges[] = { + { 5528, 362464 }, + { 11084, 6186851 }, + { 11065, 65460395 }, +}; + +static struct { + int min; + int max; +} arizona_hpdet_c_ranges[] = { + { 0, 30 }, + { 8, 100 }, + { 100, 1000 }, + { 1000, 10000 }, +}; + +static int arizona_hpdet_read(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + unsigned int val, range; + int ret; + + ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read HPDET status: %d\n", + ret); + return ret; + } + + switch (info->hpdet_ip) { + case 0: + if (!(val & ARIZONA_HP_DONE)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + val = ARIZONA_DEFAULT_HP; + } + + val &= ARIZONA_HP_LVL_MASK; + break; + + case 1: + if (!(val & ARIZONA_HP_DONE_B)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return ARIZONA_DEFAULT_HP; + } + + ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read HP value: %d\n", + ret); + return ARIZONA_DEFAULT_HP; + } + + regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + &range); + range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) + >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; + + if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && + (val < 100 || val > 0x3fb)) { + range++; + dev_dbg(arizona->dev, "Moving to HPDET range %d\n", + range); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + + /* If we go out of range report top of range */ + if (val < 100 || val > 0x3fb) { + dev_dbg(arizona->dev, "Measurement out of range\n"); + return 10000; + } + + dev_dbg(arizona->dev, "HPDET read %d in range %d\n", + val, range); + + val = arizona_hpdet_b_ranges[range].factor_b + / ((val * 100) - + arizona_hpdet_b_ranges[range].factor_a); + break; + + default: + dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", + info->hpdet_ip); + case 2: + if (!(val & ARIZONA_HP_DONE_B)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return ARIZONA_DEFAULT_HP; + } + + val &= ARIZONA_HP_LVL_B_MASK; + + regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + &range); + range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) + >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; + + /* Skip up or down a range? */ + if (range && (val < arizona_hpdet_c_ranges[range].min)) { + range--; + dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", + arizona_hpdet_c_ranges[range].min, + arizona_hpdet_c_ranges[range].max); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + + if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && + (val >= arizona_hpdet_c_ranges[range].max)) { + range++; + dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", + arizona_hpdet_c_ranges[range].min, + arizona_hpdet_c_ranges[range].max); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + } + + dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); + return val; +} + +static irqreturn_t arizona_hpdet_irq(int irq, void *data) +{ + struct arizona_extcon_info *info = data; + struct arizona *arizona = info->arizona; + int report = ARIZONA_CABLE_HEADPHONE; + int ret; + + mutex_lock(&info->lock); + + /* If we got a spurious IRQ for some reason then ignore it */ + if (!info->hpdet_active) { + dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); + mutex_unlock(&info->lock); + return IRQ_NONE; + } + + /* If the cable was removed while measuring ignore the result */ + ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL); + if (ret < 0) { + dev_err(arizona->dev, "Failed to check cable state: %d\n", + ret); + goto out; + } else if (!ret) { + dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); + goto done; + } + + ret = arizona_hpdet_read(info); + if (ret == -EAGAIN) { + goto out; + } else if (ret < 0) { + goto done; + } + + /* Reset back to starting range */ + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, 0); + + /* Report high impedence cables as line outputs */ + if (ret >= 5000) + report = ARIZONA_CABLE_LINEOUT; + else + report = ARIZONA_CABLE_HEADPHONE; + + ret = extcon_set_cable_state_(&info->edev, report, true); + if (ret != 0) + dev_err(arizona->dev, "Failed to report HP/line: %d\n", + ret); + + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0); + if (ret != 0) + dev_warn(arizona->dev, "Failed to undo magic: %d\n", ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0); + if (ret != 0) + dev_warn(arizona->dev, "Failed to undo magic: %d\n", ret); + +done: + regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, 0); + + /* Revert back to MICDET mode */ + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* If we have a mic then reenable MICDET */ + if (info->mic) + arizona_start_mic(info); + + if (info->hpdet_active) { + pm_runtime_put_autosuspend(info->dev); + info->hpdet_active = false; + } + +out: + mutex_unlock(&info->lock); + + return IRQ_HANDLED; +} + +static void arizona_identify_headphone(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + int ret; + + dev_dbg(arizona->dev, "Starting HPDET\n"); + + /* Make sure we keep the device enabled during the measurement */ + pm_runtime_get(info->dev); + + info->hpdet_active = true; + + if (info->mic) + arizona_stop_mic(info); + + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); + + ret = regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, + ARIZONA_ACCDET_MODE_HPL); + if (ret != 0) { + dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret); + goto err; + } + + ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + if (ret != 0) { + dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", + ret); + goto err; + } + + return; + +err: + regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* Just report headphone */ + ret = extcon_update_state(&info->edev, + 1 << ARIZONA_CABLE_HEADPHONE, + 1 << ARIZONA_CABLE_HEADPHONE); + if (ret != 0) + dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); + + if (info->mic) + arizona_start_mic(info); + + info->hpdet_active = false; +} + } + + info->hpdet_active = false; +} + static void arizona_start_mic(struct arizona_extcon_info *info) { struct arizona *arizona = info->arizona; @@ -125,6 +421,10 @@ static void arizona_start_mic(struct arizona_extcon_info *info) regmap_write(arizona->regmap, 0x80, 0x0); } + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, &change); @@ -189,11 +489,11 @@ static irqreturn_t arizona_micdet(int irq, void *data) /* If we got a high impedence we should have a headset, report it. */ if (info->detecting && (val & 0x400)) { + arizona_identify_headphone(info); + ret = extcon_update_state(&info->edev, - 1 << ARIZONA_CABLE_MICROPHONE | - 1 << ARIZONA_CABLE_HEADPHONE, - 1 << ARIZONA_CABLE_MICROPHONE | - 1 << ARIZONA_CABLE_HEADPHONE); + 1 << ARIZONA_CABLE_MICROPHONE, + 1 << ARIZONA_CABLE_MICROPHONE); if (ret != 0) dev_err(arizona->dev, "Headset report failed: %d\n", @@ -214,17 +514,12 @@ static irqreturn_t arizona_micdet(int irq, void *data) info->jack_flips++; if (info->jack_flips >= info->micd_num_modes) { - dev_dbg(arizona->dev, "Detected headphone\n"); + dev_dbg(arizona->dev, "Detected HP/line\n"); + arizona_identify_headphone(info); + info->detecting = false; - arizona_stop_mic(info); - ret = extcon_set_cable_state_(&info->edev, - ARIZONA_CABLE_HEADPHONE, - true); - if (ret != 0) - dev_err(arizona->dev, - "Headphone report failed: %d\n", - ret); + arizona_stop_mic(info); } else { info->micd_mode++; if (info->micd_mode == info->micd_num_modes) @@ -260,13 +555,7 @@ static irqreturn_t arizona_micdet(int irq, void *data) info->detecting = false; arizona_stop_mic(info); - ret = extcon_set_cable_state_(&info->edev, - ARIZONA_CABLE_HEADPHONE, - true); - if (ret != 0) - dev_err(arizona->dev, - "Headphone report failed: %d\n", - ret); + arizona_identify_headphone(info); } else { dev_warn(arizona->dev, "Button with no mic: %x\n", val); @@ -387,6 +676,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) break; default: info->micd_clamp = true; + info->hpdet_ip = 1; break; } break; @@ -524,6 +814,13 @@ static int arizona_extcon_probe(struct platform_device *pdev) goto err_fall_wake; } + ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, + "HPDET", arizona_hpdet_irq, info); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); + goto err_micdet; + } + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_RATE_MASK, 8 << ARIZONA_MICD_RATE_SHIFT); @@ -544,11 +841,13 @@ static int arizona_extcon_probe(struct platform_device *pdev) ret = input_register_device(info->input); if (ret) { dev_err(&pdev->dev, "Can't register input device: %d\n", ret); - goto err_micdet; + goto err_hpdet; } return 0; +err_hpdet: + arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); err_micdet: arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); err_fall_wake: |