GPIO: OMAP: move to drivers/gpio

Move OMAP GPIO driver to drivers/gpio.  Builds whenever
CONFIG_ARCH_OMAP=y.

Signed-off-by: Kevin Hilman <khilman@ti.com>

1 files changed, 2007 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
new file mode 100644
index 000000000000..6c51191da567
--- /dev/null
+++ b/drivers/gpio/gpio-omap.c
@@ -0,0 +1,2007 @@
+/*
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/syscore_ops.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <asm/mach/irq.h>
+
+struct gpio_bank {
+	unsigned long pbase;
+	void __iomem *base;
+	u16 irq;
+	u16 virtual_irq_start;
+	int method;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
+	u32 suspend_wakeup;
+	u32 saved_wakeup;
+#endif
+	u32 non_wakeup_gpios;
+	u32 enabled_non_wakeup_gpios;
+
+	u32 saved_datain;
+	u32 saved_fallingdetect;
+	u32 saved_risingdetect;
+	u32 level_mask;
+	u32 toggle_mask;
+	spinlock_t lock;
+	struct gpio_chip chip;
+	struct clk *dbck;
+	u32 mod_usage;
+	u32 dbck_enable_mask;
+	struct device *dev;
+	bool dbck_flag;
+	int stride;
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+struct omap3_gpio_regs {
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+};
+
+static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
+#endif
+
+/*
+ * TODO: Cleanup gpio_bank usage as it is having information
+ * related to all instances of the device
+ */
+static struct gpio_bank *gpio_bank;
+
+static int bank_width;
+
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+int gpio_bank_count;
+
+static inline struct gpio_bank *get_gpio_bank(int gpio)
+{
+	if (cpu_is_omap15xx()) {
+		if (OMAP_GPIO_IS_MPUIO(gpio))
+			return &gpio_bank[0];
+		return &gpio_bank[1];
+	}
+	if (cpu_is_omap16xx()) {
+		if (OMAP_GPIO_IS_MPUIO(gpio))
+			return &gpio_bank[0];
+		return &gpio_bank[1 + (gpio >> 4)];
+	}
+	if (cpu_is_omap7xx()) {
+		if (OMAP_GPIO_IS_MPUIO(gpio))
+			return &gpio_bank[0];
+		return &gpio_bank[1 + (gpio >> 5)];
+	}
+	if (cpu_is_omap24xx())
+		return &gpio_bank[gpio >> 5];
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
+		return &gpio_bank[gpio >> 5];
+	BUG();
+	return NULL;
+}
+
+static inline int get_gpio_index(int gpio)
+{
+	if (cpu_is_omap7xx())
+		return gpio & 0x1f;
+	if (cpu_is_omap24xx())
+		return gpio & 0x1f;
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
+		return gpio & 0x1f;
+	return gpio & 0x0f;
+}
+
+static inline int gpio_valid(int gpio)
+{
+	if (gpio < 0)
+		return -1;
+	if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
+		if (gpio >= OMAP_MAX_GPIO_LINES + 16)
+			return -1;
+		return 0;
+	}
+	if (cpu_is_omap15xx() && gpio < 16)
+		return 0;
+	if ((cpu_is_omap16xx()) && gpio < 64)
+		return 0;
+	if (cpu_is_omap7xx() && gpio < 192)
+		return 0;
+	if (cpu_is_omap2420() && gpio < 128)
+		return 0;
+	if (cpu_is_omap2430() && gpio < 160)
+		return 0;
+	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
+		return 0;
+	return -1;
+}
+
+static int check_gpio(int gpio)
+{
+	if (unlikely(gpio_valid(gpio) < 0)) {
+		printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
+		dump_stack();
+		return -1;
+	}
+	return 0;
+}
+
+static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
+{
+	void __iomem *reg = bank->base;
+	u32 l;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	l = __raw_readl(reg);
+	if (is_input)
+		l |= 1 << gpio;
+	else
+		l &= ~(1 << gpio);
+	__raw_writel(l, reg);
+}
+
+static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		if (enable)
+			reg += OMAP1610_GPIO_SET_DATAOUT;
+		else
+			reg += OMAP1610_GPIO_CLEAR_DATAOUT;
+		l = 1 << gpio;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETDATAOUT;
+		else
+			reg += OMAP24XX_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		if (enable)
+			reg += OMAP4_GPIO_SETDATAOUT;
+		else
+			reg += OMAP4_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	__raw_writel(l, reg);
+}
+
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_INPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAIN;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_INPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAIN;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAIN;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+	return (__raw_readl(reg)
+			& (1 << get_gpio_index(gpio))) != 0;
+}
+
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAOUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAOUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAOUT;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
+#define MOD_REG_BIT(reg, bit_mask, set)	\
+do {	\
+	int l = __raw_readl(base + reg); \
+	if (set) l |= bit_mask; \
+	else l &= ~bit_mask; \
+	__raw_writel(l, base + reg); \
+} while(0)
+
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+		unsigned debounce)
+{
+	void __iomem		*reg = bank->base;
+	u32			val;
+	u32			l;
+
+	if (!bank->dbck_flag)
+		return;
+
+	if (debounce < 32)
+		debounce = 0x01;
+	else if (debounce > 7936)
+		debounce = 0xff;
+	else
+		debounce = (debounce / 0x1f) - 1;
+
+	l = 1 << get_gpio_index(gpio);
+
+	if (bank->method == METHOD_GPIO_44XX)
+		reg += OMAP4_GPIO_DEBOUNCINGTIME;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
+	__raw_writel(debounce, reg);
+
+	reg = bank->base;
+	if (bank->method == METHOD_GPIO_44XX)
+		reg += OMAP4_GPIO_DEBOUNCENABLE;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+	val = __raw_readl(reg);
+
+	if (debounce) {
+		val |= l;
+		clk_enable(bank->dbck);
+	} else {
+		val &= ~l;
+		clk_disable(bank->dbck);
+	}
+	bank->dbck_enable_mask = val;
+
+	__raw_writel(val, reg);
+}
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
+						int trigger)
+{
+	void __iomem *base = bank->base;
+	u32 gpio_bit = 1 << gpio;
+	u32 val;
+
+	if (cpu_is_omap44xx()) {
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	} else {
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	}
+	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
+		if (cpu_is_omap44xx()) {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base+
+						OMAP4_GPIO_IRQWAKEN0);
+			else {
+				val = __raw_readl(bank->base +
+							OMAP4_GPIO_IRQWAKEN0);
+				__raw_writel(val & (~(1 << gpio)), bank->base +
+							 OMAP4_GPIO_IRQWAKEN0);
+			}
+		} else {
+			/*
+			 * GPIO wakeup request can only be generated on edge
+			 * transitions
+			 */
+			if (trigger & IRQ_TYPE_EDGE_BOTH)
+				__raw_writel(1 << gpio, bank->base
+					+ OMAP24XX_GPIO_SETWKUENA);
+			else
+				__raw_writel(1 << gpio, bank->base
+					+ OMAP24XX_GPIO_CLEARWKUENA);
+		}
+	}
+	/* This part needs to be executed always for OMAP34xx */
+	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+		/*
+		 * Log the edge gpio and manually trigger the IRQ
+		 * after resume if the input level changes
+		 * to avoid irq lost during PER RET/OFF mode
+		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
+		 */
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
+			bank->enabled_non_wakeup_gpios |= gpio_bit;
+		else
+			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
+	}
+
+	if (cpu_is_omap44xx()) {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+	} else {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	}
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once.  For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
+		break;
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_CONTROL;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
+		break;
+#endif
+	default:
+		return;
+	}
+
+	l = __raw_readl(reg);
+	if ((l >> gpio) & 1)
+		l &= ~(1 << gpio);
+	else
+		l |= 1 << gpio;
+
+	__raw_writel(l, reg);
+}
+#endif
+
+static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
+		l = __raw_readl(reg);
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_CONTROL;
+		l = __raw_readl(reg);
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		if (gpio & 0x08)
+			reg += OMAP1610_GPIO_EDGE_CTRL2;
+		else
+			reg += OMAP1610_GPIO_EDGE_CTRL1;
+		gpio &= 0x07;
+		l = __raw_readl(reg);
+		l &= ~(3 << (gpio << 1));
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 2 << (gpio << 1);
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l |= 1 << (gpio << 1);
+		if (trigger)
+			/* Enable wake-up during idle for dynamic tick */
+			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
+		else
+			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
+		l = __raw_readl(reg);
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
+		set_24xx_gpio_triggering(bank, gpio, trigger);
+		return 0;
+#endif
+	default:
+		goto bad;
+	}
+	__raw_writel(l, reg);
+	return 0;
+bad:
+	return -EINVAL;
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	struct gpio_bank *bank;
+	unsigned gpio;
+	int retval;
+	unsigned long flags;
+
+	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
+	else
+		gpio = d->irq - IH_GPIO_BASE;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+
+	if (type & ~IRQ_TYPE_SENSE_MASK)
+		return -EINVAL;
+
+	/* OMAP1 allows only only edge triggering */
+	if (!cpu_class_is_omap2()
+			&& (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
+		return -EINVAL;
+
+	bank = irq_data_get_irq_chip_data(d);
+	spin_lock_irqsave(&bank->lock, flags);
+	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		__irq_set_handler_locked(d->irq, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
+
+	return retval;
+}
+
+static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		/* MPUIO irqstatus is reset by reading the status register,
+		 * so do nothing here */
+		return;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_STATUS;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_IRQSTATUS1;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_STATUS;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_IRQSTATUS1;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_IRQSTATUS0;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	__raw_writel(gpio_mask, reg);
+
+	/* Workaround for clearing DSP GPIO interrupts to allow retention */
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
+	else if (cpu_is_omap44xx())
+		reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		__raw_writel(gpio_mask, reg);
+
+	/* Flush posted write for the irq status to avoid spurious interrupts */
+	__raw_readl(reg);
+	}
+}
+
+static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
+{
+	_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
+}
+
+static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+	void __iomem *reg = bank->base;
+	int inv = 0;
+	u32 l;
+	u32 mask;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+		mask = 0xffff;
+		inv = 1;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_MASK;
+		mask = 0xffff;
+		inv = 1;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_IRQENABLE1;
+		mask = 0xffff;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
+		mask = 0xffffffff;
+		inv = 1;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_IRQENABLE1;
+		mask = 0xffffffff;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_IRQSTATUSSET0;
+		mask = 0xffffffff;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	l = __raw_readl(reg);
+	if (inv)
+		l = ~l;
+	l &= mask;
+	return l;
+}
+
+static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
+{
+	void __iomem *reg = bank->base;
+	u32 l;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_MASK;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		if (enable)
+			reg += OMAP1610_GPIO_SET_IRQENABLE1;
+		else
+			reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
+		l = gpio_mask;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETIRQENABLE1;
+		else
+			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
+		l = gpio_mask;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		if (enable)
+			reg += OMAP4_GPIO_IRQSTATUSSET0;
+		else
+			reg += OMAP4_GPIO_IRQSTATUSCLR0;
+		l = gpio_mask;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	__raw_writel(l, reg);
+}
+
+static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
+{
+	_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
+}
+
+/*
+ * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
+ * 1510 does not seem to have a wake-up register. If JTAG is connected
+ * to the target, system will wake up always on GPIO events. While
+ * system is running all registered GPIO interrupts need to have wake-up
+ * enabled. When system is suspended, only selected GPIO interrupts need
+ * to have wake-up enabled.
+ */
+static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
+{
+	unsigned long uninitialized_var(flags);
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_MPUIO:
+	case METHOD_GPIO_1610:
+		spin_lock_irqsave(&bank->lock, flags);
+		if (enable)
+			bank->suspend_wakeup |= (1 << gpio);
+		else
+			bank->suspend_wakeup &= ~(1 << gpio);
+		spin_unlock_irqrestore(&bank->lock, flags);
+		return 0;
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
+		if (bank->non_wakeup_gpios & (1 << gpio)) {
+			printk(KERN_ERR "Unable to modify wakeup on "
+					"non-wakeup GPIO%d\n",
+					(bank - gpio_bank) * 32 + gpio);
+			return -EINVAL;
+		}
+		spin_lock_irqsave(&bank->lock, flags);
+		if (enable)
+			bank->suspend_wakeup |= (1 << gpio);
+		else
+			bank->suspend_wakeup &= ~(1 << gpio);
+		spin_unlock_irqrestore(&bank->lock, flags);
+		return 0;
+#endif
+	default:
+		printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
+		       bank->method);
+		return -EINVAL;
+	}
+}
+
+static void _reset_gpio(struct gpio_bank *bank, int gpio)
+{
+	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
+	_set_gpio_irqenable(bank, gpio, 0);
+	_clear_gpio_irqstatus(bank, gpio);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+}
+
+/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
+static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank;
+	int retval;
+
+	if (check_gpio(gpio) < 0)
+		return -ENODEV;
+	bank = irq_data_get_irq_chip_data(d);
+	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
+
+	return retval;
+}
+
+static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	/* Set trigger to none. You need to enable the desired trigger with
+	 * request_irq() or set_irq_type().
+	 */
+	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (bank->method == METHOD_GPIO_1510) {
+		void __iomem *reg;
+
+		/* Claim the pin for MPU */
+		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
+		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
+	}
+#endif
+	if (!cpu_class_is_omap1()) {
+		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
+			u32 ctrl;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
+			/* Module is enabled, clocks are not gated */
+			ctrl &= 0xFFFFFFFE;
+			__raw_writel(ctrl, reg);
+		}
+		bank->mod_usage |= 1 << offset;
+	}
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (bank->method == METHOD_GPIO_1610) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (bank->method == METHOD_GPIO_24XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (bank->method == METHOD_GPIO_44XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
+	if (!cpu_class_is_omap1()) {
+		bank->mod_usage &= ~(1 << offset);
+		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
+			u32 ctrl;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
+			/* Module is disabled, clocks are gated */
+			ctrl |= 1;
+			__raw_writel(ctrl, reg);
+		}
+	}
+	_reset_gpio(bank, bank->chip.base + offset);
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*
+ * We need to unmask the GPIO bank interrupt as soon as possible to
+ * avoid missing GPIO interrupts for other lines in the bank.
+ * Then we need to mask-read-clear-unmask the triggered GPIO lines
+ * in the bank to avoid missing nested interrupts for a GPIO line.
+ * If we wait to unmask individual GPIO lines in the bank after the
+ * line's interrupt handler has been run, we may miss some nested
+ * interrupts.
+ */
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *isr_reg = NULL;
+	u32 isr;
+	unsigned int gpio_irq, gpio_index;
+	struct gpio_bank *bank;
+	u32 retrigger = 0;
+	int unmasked = 0;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+
+	bank = irq_get_handler_data(irq);
+#ifdef CONFIG_ARCH_OMAP1
+	if (bank->method == METHOD_MPUIO)
+		isr_reg = bank->base +
+				OMAP_MPUIO_GPIO_INT / bank->stride;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (bank->method == METHOD_GPIO_1510)
+		isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (bank->method == METHOD_GPIO_1610)
+		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (bank->method == METHOD_GPIO_7XX)
+		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	if (bank->method == METHOD_GPIO_44XX)
+		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
+#endif
+
+	if (WARN_ON(!isr_reg))
+		goto exit;
+
+	while(1) {
+		u32 isr_saved, level_mask = 0;
+		u32 enabled;
+
+		enabled = _get_gpio_irqbank_mask(bank);
+		isr_saved = isr = __raw_readl(isr_reg) & enabled;
+
+		if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
+			isr &= 0x0000ffff;
+
+		if (cpu_class_is_omap2()) {
+			level_mask = bank->level_mask & enabled;
+		}
+
+		/* clear edge sensitive interrupts before handler(s) are
+		called so that we don't miss any interrupt occurred while
+		executing them */
+		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
+		_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
+		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
+
+		/* if there is only edge sensitive GPIO pin interrupts
+		configured, we could unmask GPIO bank interrupt immediately */
+		if (!level_mask && !unmasked) {
+			unmasked = 1;
+			chained_irq_exit(chip, desc);
+		}
+
+		isr |= retrigger;
+		retrigger = 0;
+		if (!isr)
+			break;
+
+		gpio_irq = bank->virtual_irq_start;
+		for (; isr != 0; isr >>= 1, gpio_irq++) {
+			gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
+			if (!(isr & 1))
+				continue;
+
+#ifdef CONFIG_ARCH_OMAP1
+			/*
+			 * Some chips can't respond to both rising and falling
+			 * at the same time.  If this irq was requested with
+			 * both flags, we need to flip the ICR data for the IRQ
+			 * to respond to the IRQ for the opposite direction.
+			 * This will be indicated in the bank toggle_mask.
+			 */
+			if (bank->toggle_mask & (1 << gpio_index))
+				_toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
+			generic_handle_irq(gpio_irq);
+		}
+	}
+	/* if bank has any level sensitive GPIO pin interrupt
+	configured, we must unmask the bank interrupt only after
+	handler(s) are executed in order to avoid spurious bank
+	interrupt */
+exit:
+	if (!unmasked)
+		chained_irq_exit(chip, desc);
+}
+
+static void gpio_irq_shutdown(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_reset_gpio(bank, gpio);
+}
+
+static void gpio_ack_irq(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_clear_gpio_irqstatus(bank, gpio);
+}
+
+static void gpio_mask_irq(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_set_gpio_irqenable(bank, gpio, 0);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+}
+
+static void gpio_unmask_irq(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	u32 trigger = irqd_get_trigger_type(d);
+
+	if (trigger)
+		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
+
+	/* For level-triggered GPIOs, the clearing must be done after
+	 * the HW source is cleared, thus after the handler has run */
+	if (bank->level_mask & irq_mask) {
+		_set_gpio_irqenable(bank, gpio, 0);
+		_clear_gpio_irqstatus(bank, gpio);
+	}
+
+	_set_gpio_irqenable(bank, gpio, 1);
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.name		= "GPIO",
+	.irq_shutdown	= gpio_irq_shutdown,
+	.irq_ack	= gpio_ack_irq,
+	.irq_mask	= gpio_mask_irq,
+	.irq_unmask	= gpio_unmask_irq,
+	.irq_set_type	= gpio_irq_type,
+	.irq_set_wake	= gpio_wake_enable,
+};
+
+/*---------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+/* MPUIO uses the always-on 32k clock */
+
+static void mpuio_ack_irq(struct irq_data *d)
+{
+	/* The ISR is reset automatically, so do nothing here. */
+}
+
+static void mpuio_mask_irq(struct irq_data *d)
+{
+	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_set_gpio_irqenable(bank, gpio, 0);
+}
+
+static void mpuio_unmask_irq(struct irq_data *d)
+{
+	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_set_gpio_irqenable(bank, gpio, 1);
+}
+
+static struct irq_chip mpuio_irq_chip = {
+	.name		= "MPUIO",
+	.irq_ack	= mpuio_ack_irq,
+	.irq_mask	= mpuio_mask_irq,
+	.irq_unmask	= mpuio_unmask_irq,
+	.irq_set_type	= gpio_irq_type,
+#ifdef CONFIG_ARCH_OMAP16XX
+	/* REVISIT: assuming only 16xx supports MPUIO wake events */
+	.irq_set_wake	= gpio_wake_enable,
+#endif
+};
+
+
+#define bank_is_mpuio(bank)	((bank)->method == METHOD_MPUIO)
+
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+#include <linux/platform_device.h>
+
+static int omap_mpuio_suspend_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank	*bank = platform_get_drvdata(pdev);
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+	bank->saved_wakeup = __raw_readl(mask_reg);
+	__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static int omap_mpuio_resume_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank	*bank = platform_get_drvdata(pdev);
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+	__raw_writel(bank->saved_wakeup, mask_reg);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+	.suspend_noirq = omap_mpuio_suspend_noirq,
+	.resume_noirq = omap_mpuio_resume_noirq,
+};
+
+/* use platform_driver for this. */
+static struct platform_driver omap_mpuio_driver = {
+	.driver		= {
+		.name	= "mpuio",
+		.pm	= &omap_mpuio_dev_pm_ops,
+	},
+};
+
+static struct platform_device omap_mpuio_device = {
+	.name		= "mpuio",
+	.id		= -1,
+	.dev = {
+		.driver = &omap_mpuio_driver.driver,
+	}
+	/* could list the /proc/iomem resources */
+};
+
+static inline void mpuio_init(void)
+{
+	struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
+	platform_set_drvdata(&omap_mpuio_device, bank);
+
+	if (platform_driver_register(&omap_mpuio_driver) == 0)
+		(void) platform_device_register(&omap_mpuio_device);
+}
+
+#else
+static inline void mpuio_init(void) {}
+#endif	/* 16xx */
+
+#else
+
+extern struct irq_chip mpuio_irq_chip;
+
+#define bank_is_mpuio(bank)	0
+static inline void mpuio_init(void) {}
+
+#endif
+
+/*---------------------------------------------------------------------*/
+
+/* REVISIT these are stupid implementations!  replace by ones that
+ * don't switch on METHOD_* and which mostly avoid spinlocks
+ */
+
+static int gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_direction(bank, offset, 1);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
+		break;
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+	default:
+		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+		return -EINVAL;
+	}
+	return __raw_readl(reg) & mask;
+}
+
+static int gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	void __iomem *reg;
+	int gpio;
+	u32 mask;
+
+	gpio = chip->base + offset;
+	bank = get_gpio_bank(gpio);
+	reg = bank->base;
+	mask = 1 << get_gpio_index(gpio);
+
+	if (gpio_is_input(bank, mask))
+		return _get_gpio_datain(bank, gpio);
+	else
+		return _get_gpio_dataout(bank, gpio);
+}
+
+static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	_set_gpio_direction(bank, offset, 0);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+		unsigned debounce)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+
+	if (!bank->dbck) {
+		bank->dbck = clk_get(bank->dev, "dbclk");
+		if (IS_ERR(bank->dbck))
+			dev_err(bank->dev, "Could not get gpio dbck\n");
+	}
+
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_debounce(bank, offset, debounce);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	return bank->virtual_irq_start + offset;
+}
+
+/*---------------------------------------------------------------------*/
+
+static void __init omap_gpio_show_rev(struct gpio_bank *bank)
+{
+	u32 rev;
+
+	if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
+		rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
+	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
+	else if (cpu_is_omap44xx())
+		rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
+	else
+		return;
+
+	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+		(rev >> 4) & 0x0f, rev & 0x0f);
+}
+
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static inline int init_gpio_info(struct platform_device *pdev)
+{
+	/* TODO: Analyze removing gpio_bank_count usage from driver code */
+	gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
+				GFP_KERNEL);
+	if (!gpio_bank) {
+		dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/* TODO: Cleanup cpu_is_* checks */
+static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
+{
+	if (cpu_class_is_omap2()) {
+		if (cpu_is_omap44xx()) {
+			__raw_writel(0xffffffff, bank->base +
+					OMAP4_GPIO_IRQSTATUSCLR0);
+			__raw_writel(0x00000000, bank->base +
+					 OMAP4_GPIO_DEBOUNCENABLE);
+			/* Initialize interface clk ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+		} else if (cpu_is_omap34xx()) {
+			__raw_writel(0x00000000, bank->base +
+					OMAP24XX_GPIO_IRQENABLE1);
+			__raw_writel(0xffffffff, bank->base +
+					OMAP24XX_GPIO_IRQSTATUS1);
+			__raw_writel(0x00000000, bank->base +
+					OMAP24XX_GPIO_DEBOUNCE_EN);
+
+			/* Initialize interface clk ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		} else if (cpu_is_omap24xx()) {
+			static const u32 non_wakeup_gpios[] = {
+				0xe203ffc0, 0x08700040
+			};
+			if (id < ARRAY_SIZE(non_wakeup_gpios))
+				bank->non_wakeup_gpios = non_wakeup_gpios[id];
+		}
+	} else if (cpu_class_is_omap1()) {
+		if (bank_is_mpuio(bank))
+			__raw_writew(0xffff, bank->base +
+				OMAP_MPUIO_GPIO_MASKIT / bank->stride);
+		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
+			__raw_writew(0xffff, bank->base
+						+ OMAP1510_GPIO_INT_MASK);
+			__raw_writew(0x0000, bank->base
+						+ OMAP1510_GPIO_INT_STATUS);
+		}
+		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
+			__raw_writew(0x0000, bank->base
+						+ OMAP1610_GPIO_IRQENABLE1);
+			__raw_writew(0xffff, bank->base
+						+ OMAP1610_GPIO_IRQSTATUS1);
+			__raw_writew(0x0014, bank->base
+						+ OMAP1610_GPIO_SYSCONFIG);
+
+			/*
+			 * Enable system clock for GPIO module.
+			 * The CAM_CLK_CTRL *is* really the right place.
+			 */
+			omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+						ULPD_CAM_CLK_CTRL);
+		}
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base
+						+ OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base
+						+ OMAP7XX_GPIO_INT_STATUS);
+		}
+	}
+}
+
+static void __init omap_gpio_chip_init(struct gpio_bank *bank)
+{
+	int j;
+	static int gpio;
+
+	bank->mod_usage = 0;
+	/*
+	 * REVISIT eventually switch from OMAP-specific gpio structs
+	 * over to the generic ones
+	 */
+	bank->chip.request = omap_gpio_request;
+	bank->chip.free = omap_gpio_free;
+	bank->chip.direction_input = gpio_input;
+	bank->chip.get = gpio_get;
+	bank->chip.direction_output = gpio_output;
+	bank->chip.set_debounce = gpio_debounce;
+	bank->chip.set = gpio_set;
+	bank->chip.to_irq = gpio_2irq;
+	if (bank_is_mpuio(bank)) {
+		bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP16XX
+		bank->chip.dev = &omap_mpuio_device.dev;
+#endif
+		bank->chip.base = OMAP_MPUIO(0);
+	} else {
+		bank->chip.label = "gpio";
+		bank->chip.base = gpio;
+		gpio += bank_width;
+	}
+	bank->chip.ngpio = bank_width;
+
+	gpiochip_add(&bank->chip);
+
+	for (j = bank->virtual_irq_start;
+		     j < bank->virtual_irq_start + bank_width; j++) {
+		irq_set_lockdep_class(j, &gpio_lock_class);
+		irq_set_chip_data(j, bank);
+		if (bank_is_mpuio(bank))
+			irq_set_chip(j, &mpuio_irq_chip);
+		else
+			irq_set_chip(j, &gpio_irq_chip);
+		irq_set_handler(j, handle_simple_irq);
+		set_irq_flags(j, IRQF_VALID);
+	}
+	irq_set_chained_handler(bank->irq, gpio_irq_handler);
+	irq_set_handler_data(bank->irq, bank);
+}
+
+static int __devinit omap_gpio_probe(struct platform_device *pdev)
+{
+	static int gpio_init_done;
+	struct omap_gpio_platform_data *pdata;
+	struct resource *res;
+	int id;
+	struct gpio_bank *bank;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	pdata = pdev->dev.platform_data;
+
+	if (!gpio_init_done) {
+		int ret;
+
+		ret = init_gpio_info(pdev);
+		if (ret)
+			return ret;
+	}
+
+	id = pdev->id;
+	bank = &gpio_bank[id];
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
+		return -ENODEV;
+	}
+
+	bank->irq = res->start;
+	bank->virtual_irq_start = pdata->virtual_irq_start;
+	bank->method = pdata->bank_type;
+	bank->dev = &pdev->dev;
+	bank->dbck_flag = pdata->dbck_flag;
+	bank->stride = pdata->bank_stride;
+	bank_width = pdata->bank_width;
+
+	spin_lock_init(&bank->lock);
+
+	/* Static mapping, never released */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
+		return -ENODEV;
+	}
+
+	bank->base = ioremap(res->start, resource_size(res));
+	if (!bank->base) {
+		dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
+		return -ENOMEM;
+	}
+
+	pm_runtime_enable(bank->dev);
+	pm_runtime_get_sync(bank->dev);
+
+	omap_gpio_mod_init(bank, id);
+	omap_gpio_chip_init(bank);
+	omap_gpio_show_rev(bank);
+
+	if (!gpio_init_done)
+		gpio_init_done = 1;
+
+	return 0;
+}
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
+static int omap_gpio_suspend(void)
+{
+	int i;
+
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
+		return 0;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_status;
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+		unsigned long flags;
+
+		switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
+		case METHOD_GPIO_1610:
+			wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
+			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_44XX:
+			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
+#endif
+		default:
+			continue;
+		}
+
+		spin_lock_irqsave(&bank->lock, flags);
+		bank->saved_wakeup = __raw_readl(wake_status);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->suspend_wakeup, wake_set);
+		spin_unlock_irqrestore(&bank->lock, flags);
+	}
+
+	return 0;
+}
+
+static void omap_gpio_resume(void)
+{
+	int i;
+
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
+		return;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+		unsigned long flags;
+
+		switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
+		case METHOD_GPIO_1610:
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_44XX:
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
+#endif
+		default:
+			continue;
+		}
+
+		spin_lock_irqsave(&bank->lock, flags);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->saved_wakeup, wake_set);
+		spin_unlock_irqrestore(&bank->lock, flags);
+	}
+}
+
+static struct syscore_ops omap_gpio_syscore_ops = {
+	.suspend	= omap_gpio_suspend,
+	.resume		= omap_gpio_resume,
+};
+
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+static int workaround_enabled;
+
+void omap2_gpio_prepare_for_idle(int off_mode)
+{
+	int i, c = 0;
+	int min = 0;
+
+	if (cpu_is_omap34xx())
+		min = 1;
+
+	for (i = min; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		u32 l1 = 0, l2 = 0;
+		int j;
+
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+			clk_disable(bank->dbck);
+
+		if (!off_mode)
+			continue;
+
+		/* If going to OFF, remove triggering for all
+		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+		 * generated.  See OMAP2420 Errata item 1.101. */
+		if (!(bank->enabled_non_wakeup_gpios))
+			continue;
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			bank->saved_datain = __raw_readl(bank->base +
+					OMAP24XX_GPIO_DATAIN);
+			l1 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_FALLINGDETECT);
+			l2 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_RISINGDETECT);
+		}
+
+		if (cpu_is_omap44xx()) {
+			bank->saved_datain = __raw_readl(bank->base +
+						OMAP4_GPIO_DATAIN);
+			l1 = __raw_readl(bank->base +
+						OMAP4_GPIO_FALLINGDETECT);
+			l2 = __raw_readl(bank->base +
+						OMAP4_GPIO_RISINGDETECT);
+		}
+
+		bank->saved_fallingdetect = l1;
+		bank->saved_risingdetect = l2;
+		l1 &= ~bank->enabled_non_wakeup_gpios;
+		l2 &= ~bank->enabled_non_wakeup_gpios;
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			__raw_writel(l1, bank->base +
+					OMAP24XX_GPIO_FALLINGDETECT);
+			__raw_writel(l2, bank->base +
+					OMAP24XX_GPIO_RISINGDETECT);
+		}
+
+		if (cpu_is_omap44xx()) {
+			__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+			__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+		}
+
+		c++;
+	}
+	if (!c) {
+		workaround_enabled = 0;
+		return;
+	}
+	workaround_enabled = 1;
+}
+
+void omap2_gpio_resume_after_idle(void)
+{
+	int i;
+	int min = 0;
+
+	if (cpu_is_omap34xx())
+		min = 1;
+	for (i = min; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		u32 l = 0, gen, gen0, gen1;
+		int j;
+
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+			clk_enable(bank->dbck);
+
+		if (!workaround_enabled)
+			continue;
+
+		if (!(bank->enabled_non_wakeup_gpios))
+			continue;
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+			__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
+			l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+		}
+
+		if (cpu_is_omap44xx()) {
+			__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP4_GPIO_FALLINGDETECT);
+			__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP4_GPIO_RISINGDETECT);
+			l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
+		}
+
+		/* Check if any of the non-wakeup interrupt GPIOs have changed
+		 * state.  If so, generate an IRQ by software.  This is
+		 * horribly racy, but it's the best we can do to work around
+		 * this silicon bug. */
+		l ^= bank->saved_datain;
+		l &= bank->enabled_non_wakeup_gpios;
+
+		/*
+		 * No need to generate IRQs for the rising edge for gpio IRQs
+		 * configured with falling edge only; and vice versa.
+		 */
+		gen0 = l & bank->saved_fallingdetect;
+		gen0 &= bank->saved_datain;
+
+		gen1 = l & bank->saved_risingdetect;
+		gen1 &= ~(bank->saved_datain);
+
+		/* FIXME: Consider GPIO IRQs with level detections properly! */
+		gen = l & (~(bank->saved_fallingdetect) &
+				~(bank->saved_risingdetect));
+		/* Consider all GPIO IRQs needed to be updated */
+		gen |= gen0 | gen1;
+
+		if (gen) {
+			u32 old0, old1;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+				old0 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				old1 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+				__raw_writel(old0 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				__raw_writel(old1 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+				__raw_writel(old0, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				__raw_writel(old1, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+			}
+
+			if (cpu_is_omap44xx()) {
+				old0 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+				old1 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+				__raw_writel(old0 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+				__raw_writel(old1 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+				__raw_writel(old0, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+				__raw_writel(old1, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			}
+		}
+	}
+
+}
+
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+/* save the registers of bank 2-6 */
+void omap_gpio_save_context(void)
+{
+	int i;
+
+	/* saving banks from 2-6 only since GPIO1 is in WKUP */
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		gpio_context[i].irqenable1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		gpio_context[i].irqenable2 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		gpio_context[i].wake_en =
+			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+		gpio_context[i].ctrl =
+			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+		gpio_context[i].oe =
+			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
+		gpio_context[i].leveldetect0 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		gpio_context[i].leveldetect1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		gpio_context[i].risingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		gpio_context[i].fallingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		gpio_context[i].dataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+	}
+}
+
+/* restore the required registers of bank 2-6 */
+void omap_gpio_restore_context(void)
+{
+	int i;
+
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		__raw_writel(gpio_context[i].irqenable1,
+				bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		__raw_writel(gpio_context[i].irqenable2,
+				bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		__raw_writel(gpio_context[i].wake_en,
+				bank->base + OMAP24XX_GPIO_WAKE_EN);
+		__raw_writel(gpio_context[i].ctrl,
+				bank->base + OMAP24XX_GPIO_CTRL);
+		__raw_writel(gpio_context[i].oe,
+				bank->base + OMAP24XX_GPIO_OE);
+		__raw_writel(gpio_context[i].leveldetect0,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		__raw_writel(gpio_context[i].leveldetect1,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		__raw_writel(gpio_context[i].risingdetect,
+				bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		__raw_writel(gpio_context[i].fallingdetect,
+				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		__raw_writel(gpio_context[i].dataout,
+				bank->base + OMAP24XX_GPIO_DATAOUT);
+	}
+}
+#endif
+
+static struct platform_driver omap_gpio_driver = {
+	.probe		= omap_gpio_probe,
+	.driver		= {
+		.name	= "omap_gpio",
+	},
+};
+
+/*
+ * gpio driver register needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap_gpio_drv_reg() is a postcore_initcall.
+ */
+static int __init omap_gpio_drv_reg(void)
+{
+	return platform_driver_register(&omap_gpio_driver);
+}
+postcore_initcall(omap_gpio_drv_reg);
+
+static int __init omap_gpio_sysinit(void)
+{
+	mpuio_init();
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
+	if (cpu_is_omap16xx() || cpu_class_is_omap2())
+		register_syscore_ops(&omap_gpio_syscore_ops);
+#endif
+
+	return 0;
+}
+
+arch_initcall(omap_gpio_sysinit);