Merge remote branch 'anholt/drm-intel-next' into drm-next

* anholt/drm-intel-next: (515 commits)
  drm/i915: Fix out of tree builds
  drm/i915: move fence lru to struct drm_i915_fence_reg
  drm/i915: don't allow tiling changes on pinned buffers v2
  drm/i915: Be extra careful about A/D matching for multifunction SDVO
  drm/i915: Fix DDC bus selection for multifunction SDVO
  drm/i915: cleanup mode setting before unmapping registers
  drm/i915: Make fbc control wrapper functions
  drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
  drm/i915: Use spatio-temporal dithering on PCH
  [MTD] Remove zero-length files mtdbdi.c and internal.ho
  pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
  libata: Fix several inaccuracies in developer's guide
  slub: Fix bad boundary check in init_kmem_cache_nodes()
  raid6: fix recovery performance regression
  KEYS: call_sbin_request_key() must write lock keyrings before modifying them
  KEYS: Use RCU dereference wrappers in keyring key type code
  KEYS: find_keyring_by_name() can gain access to a freed keyring
  ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
  ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
  ALSA: take tu->qlock with irqs disabled
  ...

3 files changed, 25 insertions, 6 deletions

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 76be229c814d..eb0c3fe44b29 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -416,7 +416,8 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
 	return 0;
 
 free_sd:
-	sysfs_put(pdesc->value_sd);
+	if (pdesc)
+		sysfs_put(pdesc->value_sd);
 free_id:
 	idr_remove(&pdesc_idr, id);
 	desc->flags &= GPIO_FLAGS_MASK;
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 7d521e1d17e1..b827c976dc62 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -252,6 +252,18 @@ static void pca953x_irq_bus_lock(unsigned int irq)
 static void pca953x_irq_bus_sync_unlock(unsigned int irq)
 {
 	struct pca953x_chip *chip = get_irq_chip_data(irq);
+	uint16_t new_irqs;
+	uint16_t level;
+
+	/* Look for any newly setup interrupt */
+	new_irqs = chip->irq_trig_fall | chip->irq_trig_raise;
+	new_irqs &= ~chip->reg_direction;
+
+	while (new_irqs) {
+		level = __ffs(new_irqs);
+		pca953x_gpio_direction_input(&chip->gpio_chip, level);
+		new_irqs &= ~(1 << level);
+	}
 
 	mutex_unlock(&chip->irq_lock);
 }
@@ -278,7 +290,7 @@ static int pca953x_irq_set_type(unsigned int irq, unsigned int type)
 	else
 		chip->irq_trig_raise &= ~mask;
 
-	return pca953x_gpio_direction_input(&chip->gpio_chip, level);
+	return 0;
 }
 
 static struct irq_chip pca953x_irq_chip = {
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 5ad8f778ced4..105701a1f05b 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -91,6 +91,12 @@ static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
 	gpiodir = readb(chip->base + GPIODIR);
 	gpiodir |= 1 << offset;
 	writeb(gpiodir, chip->base + GPIODIR);
+
+	/*
+	 * gpio value is set again, because pl061 doesn't allow to set value of
+	 * a gpio pin before configuring it in OUT mode.
+	 */
+	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
 	spin_unlock_irqrestore(&chip->lock, flags);
 
 	return 0;
@@ -183,7 +189,7 @@ static int pl061_irq_type(unsigned irq, unsigned trigger)
 		gpioibe &= ~(1 << offset);
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			gpioiev |= 1 << offset;
-		else
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			gpioiev &= ~(1 << offset);
 	}
 	writeb(gpioibe, chip->base + GPIOIBE);
@@ -204,7 +210,7 @@ static struct irq_chip pl061_irqchip = {
 
 static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct list_head *chip_list = get_irq_chip_data(irq);
+	struct list_head *chip_list = get_irq_data(irq);
 	struct list_head *ptr;
 	struct pl061_gpio *chip;
 
@@ -297,9 +303,9 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
 			goto iounmap;
 		}
 		INIT_LIST_HEAD(chip_list);
-		set_irq_chip_data(irq, chip_list);
+		set_irq_data(irq, chip_list);
 	} else
-		chip_list = get_irq_chip_data(irq);
+		chip_list = get_irq_data(irq);
 	list_add(&chip->list, chip_list);
 
 	for (i = 0; i < PL061_GPIO_NR; i++) {