Merge tag 'drm-intel-next-2015-12-18' of git://anongit.freedesktop.org/drm-intel into drm-next

- fix atomic watermark recomputation logic (Maarten)
- modeset sequence fixes for LPT (Ville)
- more kbl enabling&prep work (Rodrigo, Wayne)
- first bits for mst audio
- page dirty tracking fixes from Dave Gordon
- new get_eld hook from Takashi, also included in the sound tree
- fixup cursor handling when placed at address 0 (Ville)
- refactor VBT parsing code (Jani)
- rpm wakelock debug infrastructure ( Imre)
- fbdev is pinned again (Chris)
- tune the busywait logic to avoid wasting cpu cycles (Chris)

* tag 'drm-intel-next-2015-12-18' of git://anongit.freedesktop.org/drm-intel: (81 commits)
  drm/i915: Update DRIVER_DATE to 20151218
  drm/i915/skl: Default to noncoherent access up to F0
  drm/i915: Only spin whilst waiting on the current request
  drm/i915: Limit the busy wait on requests to 5us not 10ms!
  drm/i915: Break busywaiting for requests on pending signals
  drm/i915: don't enable autosuspend on platforms without RPM support
  drm/i915/backlight: prefer dev_priv over dev pointer
  drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
  drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping
  drm/i915: Set the map-and-fenceable flag for preallocated objects
  drm/i915: mdelay(10) considered harmful
  drm/i915: check that we are in an RPM atomic section in GGTT PTE updaters
  drm/i915: add support for checking RPM atomic sections
  drm/i915: check that we hold an RPM wakelock ref before we put it
  drm/i915: add support for checking if we hold an RPM reference
  drm/i915: use assert_rpm_wakelock_held instead of opencoding it
  drm/i915: add assert_rpm_wakelock_held helper
  drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert helpers
  drm/i915: get a permanent RPM reference on platforms w/o RPM support
  drm/i915: refactor RPM disabling due to RC6 being disabled
  ...

1 files changed, 10 insertions, 19 deletions

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index fff9a66c32a1..44742fa2f616 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -369,7 +369,7 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
 {
 	struct drm_device *dev = encoder->base.dev;
 
-	if (IS_VALLEYVIEW(dev))
+	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
 		vlv_dsi_device_ready(encoder);
 	else if (IS_BROXTON(dev))
 		bxt_dsi_device_ready(encoder);
@@ -487,7 +487,7 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 
 	msleep(intel_dsi->panel_on_delay);
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
 		/*
 		 * Disable DPOunit clock gating, can stall pipe
 		 * and we need DPLL REFA always enabled
@@ -684,8 +684,7 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
 		 * Enable bit does not get set. To check whether DSI Port C
 		 * was enabled in BIOS, check the Pipe B enable bit
 		 */
-		if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) &&
-		    (port == PORT_C))
+		if (IS_VALLEYVIEW(dev) && port == PORT_C)
 			dpi_enabled = I915_READ(PIPECONF(PIPE_B)) &
 							PIPECONF_ENABLE;
 
@@ -716,7 +715,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
 
 	if (IS_BROXTON(encoder->base.dev))
 		pclk = bxt_get_dsi_pclk(encoder, pipe_config->pipe_bpp);
-	else if (IS_VALLEYVIEW(encoder->base.dev))
+	else if (IS_VALLEYVIEW(encoder->base.dev) ||
+		 IS_CHERRYVIEW(encoder->base.dev))
 		pclk = vlv_get_dsi_pclk(encoder, pipe_config->pipe_bpp);
 
 	if (!pclk)
@@ -869,7 +869,7 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
 	}
 
 	for_each_dsi_port(port, intel_dsi->ports) {
-		if (IS_VALLEYVIEW(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
 			/*
 			 * escape clock divider, 20MHz, shared for A and C.
 			 * device ready must be off when doing this! txclkesc?
@@ -885,21 +885,12 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
 			I915_WRITE(MIPI_CTRL(port), tmp |
 					READ_REQUEST_PRIORITY_HIGH);
 		} else if (IS_BROXTON(dev)) {
-			/*
-			 * FIXME:
-			 * BXT can connect any PIPE to any MIPI port.
-			 * Select the pipe based on the MIPI port read from
-			 * VBT for now. Pick PIPE A for MIPI port A and C
-			 * for port C.
-			 */
+			enum pipe pipe = intel_crtc->pipe;
+
 			tmp = I915_READ(MIPI_CTRL(port));
 			tmp &= ~BXT_PIPE_SELECT_MASK;
 
-			if (port == PORT_A)
-				tmp |= BXT_PIPE_SELECT_A;
-			else if (port == PORT_C)
-				tmp |= BXT_PIPE_SELECT_C;
-
+			tmp |= BXT_PIPE_SELECT(pipe);
 			I915_WRITE(MIPI_CTRL(port), tmp);
 		}
 
@@ -1129,7 +1120,7 @@ void intel_dsi_init(struct drm_device *dev)
 	if (!dev_priv->vbt.has_mipi)
 		return;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
 		dev_priv->mipi_mmio_base = VLV_MIPI_BASE;
 	} else {
 		DRM_ERROR("Unsupported Mipi device to reg base");