Bump Linux kernel to 2.6.32.25

20 files changed, 214 insertions, 100 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 700e93adeb33..c1f7ea024581 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -374,7 +374,7 @@ config SENSORS_GL520SM
 
 config SENSORS_CORETEMP
 	tristate "Intel Core/Core2/Atom temperature sensor"
-	depends on X86 && EXPERIMENTAL
+	depends on X86 && PCI && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the temperature
 	  sensor inside your CPU. Most of the family 6 CPUs
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index 1852f27bac51..14f910d3dd9b 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -97,7 +97,7 @@ I2C_CLIENT_INSMOD_1(adt7462);
 #define		ADT7462_PIN24_SHIFT		6
 #define		ADT7462_PIN26_VOLT_INPUT	0x08
 #define		ADT7462_PIN25_VOLT_INPUT	0x20
-#define		ADT7462_PIN28_SHIFT		6	/* cfg3 */
+#define		ADT7462_PIN28_SHIFT		4	/* cfg3 */
 #define		ADT7462_PIN28_VOLT		0x5
 
 #define ADT7462_REG_ALARM1			0xB8
@@ -182,7 +182,7 @@ I2C_CLIENT_INSMOD_1(adt7462);
  *
  * Some, but not all, of these voltages have low/high limits.
  */
-#define ADT7462_VOLT_COUNT	12
+#define ADT7462_VOLT_COUNT	13
 
 #define ADT7462_VENDOR		0x41
 #define ADT7462_DEVICE		0x62
diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c
index 6c9ace1b76f6..2ad62c339cd2 100644
--- a/drivers/hwmon/ams/ams-core.c
+++ b/drivers/hwmon/ams/ams-core.c
@@ -213,7 +213,7 @@ int __init ams_init(void)
 	return -ENODEV;
 }
 
-void ams_exit(void)
+void ams_sensor_detach(void)
 {
 	/* Remove input device */
 	ams_input_exit();
@@ -221,9 +221,6 @@ void ams_exit(void)
 	/* Remove attributes */
 	device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
 
-	/* Shut down implementation */
-	ams_info.exit();
-
 	/* Flush interrupt worker
 	 *
 	 * We do this after ams_info.exit(), because an interrupt might
@@ -239,6 +236,12 @@ void ams_exit(void)
 	pmf_unregister_irq_client(&ams_freefall_client);
 }
 
+static void __exit ams_exit(void)
+{
+	/* Shut down implementation */
+	ams_info.exit();
+}
+
 MODULE_AUTHOR("Stelian Pop, Michael Hanselmann");
 MODULE_DESCRIPTION("Apple Motion Sensor driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ams/ams-i2c.c b/drivers/hwmon/ams/ams-i2c.c
index 2cbf8a6506c7..abeecd27b484 100644
--- a/drivers/hwmon/ams/ams-i2c.c
+++ b/drivers/hwmon/ams/ams-i2c.c
@@ -238,6 +238,8 @@ static int ams_i2c_probe(struct i2c_client *client,
 static int ams_i2c_remove(struct i2c_client *client)
 {
 	if (ams_info.has_device) {
+		ams_sensor_detach();
+
 		/* Disable interrupts */
 		ams_i2c_set_irq(AMS_IRQ_ALL, 0);
 
diff --git a/drivers/hwmon/ams/ams-pmu.c b/drivers/hwmon/ams/ams-pmu.c
index fb18b3d3162b..4f61b3ee1b08 100644
--- a/drivers/hwmon/ams/ams-pmu.c
+++ b/drivers/hwmon/ams/ams-pmu.c
@@ -133,6 +133,8 @@ static void ams_pmu_get_xyz(s8 *x, s8 *y, s8 *z)
 
 static void ams_pmu_exit(void)
 {
+	ams_sensor_detach();
+
 	/* Disable interrupts */
 	ams_pmu_set_irq(AMS_IRQ_ALL, 0);
 
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
index 5ed387b0bd9a..b28d7e27a031 100644
--- a/drivers/hwmon/ams/ams.h
+++ b/drivers/hwmon/ams/ams.h
@@ -61,6 +61,7 @@ extern struct ams ams_info;
 
 extern void ams_sensors(s8 *x, s8 *y, s8 *z);
 extern int ams_sensor_attach(void);
+extern void ams_sensor_detach(void);
 
 extern int ams_pmu_init(struct device_node *np);
 extern int ams_i2c_init(struct device_node *np);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index caef39cda8c8..585219167fa7 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -33,6 +33,7 @@
 #include <linux/list.h>
 #include <linux/platform_device.h>
 #include <linux/cpu.h>
+#include <linux/pci.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
 
@@ -52,6 +53,7 @@ struct coretemp_data {
 	struct mutex update_lock;
 	const char *name;
 	u32 id;
+	u16 core_id;
 	char valid;		/* zero until following fields are valid */
 	unsigned long last_updated;	/* in jiffies */
 	int temp;
@@ -74,7 +76,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 	if (attr->index == SHOW_NAME)
 		ret = sprintf(buf, "%s\n", data->name);
 	else	/* show label */
-		ret = sprintf(buf, "Core %d\n", data->id);
+		ret = sprintf(buf, "Core %d\n", data->core_id);
 	return ret;
 }
 
@@ -161,6 +163,7 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *
 	int usemsr_ee = 1;
 	int err;
 	u32 eax, edx;
+	struct pci_dev *host_bridge;
 
 	/* Early chips have no MSR for TjMax */
 
@@ -168,11 +171,21 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *
 		usemsr_ee = 0;
 	}
 
-	/* Atoms seems to have TjMax at 90C */
+	/* Atom CPUs */
 
 	if (c->x86_model == 0x1c) {
 		usemsr_ee = 0;
-		tjmax = 90000;
+
+		host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+
+		if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL
+		    && (host_bridge->device == 0xa000	/* NM10 based nettop */
+		    || host_bridge->device == 0xa010))	/* NM10 based netbook */
+			tjmax = 100000;
+		else
+			tjmax = 90000;
+
+		pci_dev_put(host_bridge);
 	}
 
 	if ((c->x86_model > 0xe) && (usemsr_ee)) {
@@ -216,7 +229,7 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *
 		if (err) {
 			dev_warn(dev,
 				 "Unable to access MSR 0xEE, for Tjmax, left"
-				 " at default");
+				 " at default\n");
 		} else if (eax & 0x40000000) {
 			tjmax = tjmax_ee;
 		}
@@ -243,6 +256,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 	}
 
 	data->id = pdev->id;
+#ifdef CONFIG_SMP
+	data->core_id = c->cpu_core_id;
+#endif
 	data->name = "coretemp";
 	mutex_init(&data->update_lock);
 
@@ -340,6 +356,10 @@ struct pdev_entry {
 	struct list_head list;
 	struct platform_device *pdev;
 	unsigned int cpu;
+#ifdef CONFIG_SMP
+	u16 phys_proc_id;
+	u16 cpu_core_id;
+#endif
 };
 
 static LIST_HEAD(pdev_list);
@@ -350,6 +370,22 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 	int err;
 	struct platform_device *pdev;
 	struct pdev_entry *pdev_entry;
+#ifdef CONFIG_SMP
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+#endif
+
+	mutex_lock(&pdev_list_mutex);
+
+#ifdef CONFIG_SMP
+	/* Skip second HT entry of each core */
+	list_for_each_entry(pdev_entry, &pdev_list, list) {
+		if (c->phys_proc_id == pdev_entry->phys_proc_id &&
+		    c->cpu_core_id == pdev_entry->cpu_core_id) {
+			err = 0;	/* Not an error */
+			goto exit;
+		}
+	}
+#endif
 
 	pdev = platform_device_alloc(DRVNAME, cpu);
 	if (!pdev) {
@@ -373,7 +409,10 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 
 	pdev_entry->pdev = pdev;
 	pdev_entry->cpu = cpu;
-	mutex_lock(&pdev_list_mutex);
+#ifdef CONFIG_SMP
+	pdev_entry->phys_proc_id = c->phys_proc_id;
+	pdev_entry->cpu_core_id = c->cpu_core_id;
+#endif
 	list_add_tail(&pdev_entry->list, &pdev_list);
 	mutex_unlock(&pdev_list_mutex);
 
@@ -384,6 +423,7 @@ exit_device_free:
 exit_device_put:
 	platform_device_put(pdev);
 exit:
+	mutex_unlock(&pdev_list_mutex);
 	return err;
 }
 
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index e2107e533ede..afebc3439881 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -79,7 +79,7 @@ I2C_CLIENT_INSMOD_2(f75373, f75375);
 #define F75375_REG_PWM2_DROP_DUTY	0x6C
 
 #define FAN_CTRL_LINEAR(nr)		(4 + nr)
-#define FAN_CTRL_MODE(nr)		(5 + ((nr) * 2))
+#define FAN_CTRL_MODE(nr)		(4 + ((nr) * 2))
 
 /*
  * Data structures and manipulation thereof
@@ -298,7 +298,7 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 		return -EINVAL;
 
 	fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
-	fanmode = ~(3 << FAN_CTRL_MODE(nr));
+	fanmode &= ~(3 << FAN_CTRL_MODE(nr));
 
 	switch (val) {
 	case 0: /* Full speed */
@@ -350,7 +350,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
 
 	mutex_lock(&data->update_lock);
 	conf = f75375_read8(client, F75375_REG_CONFIG1);
-	conf = ~(1 << FAN_CTRL_LINEAR(nr));
+	conf &= ~(1 << FAN_CTRL_LINEAR(nr));
 
 	if (val == 0)
 		conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index da1b1f9488af..f600813e2b65 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -767,6 +767,7 @@ leave:
 static int watchdog_open(struct inode *inode, struct file *filp)
 {
 	struct fschmd_data *pos, *data = NULL;
+	int watchdog_is_open;
 
 	/* We get called from drivers/char/misc.c with misc_mtx hold, and we
 	   call misc_register() from fschmd_probe() with watchdog_data_mutex
@@ -781,10 +782,12 @@ static int watchdog_open(struct inode *inode, struct file *filp)
 		}
 	}
 	/* Note we can never not have found data, so we don't check for this */
-	kref_get(&data->kref);
+	watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
+	if (!watchdog_is_open)
+		kref_get(&data->kref);
 	mutex_unlock(&watchdog_data_mutex);
 
-	if (test_and_set_bit(0, &data->watchdog_is_open))
+	if (watchdog_is_open)
 		return -EBUSY;
 
 	/* Start the watchdog */
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index be475e844c2a..f16d60f0bf47 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -324,8 +324,8 @@ static int lis3lv02d_remove(struct acpi_device *device, int type)
 	lis3lv02d_joystick_disable();
 	lis3lv02d_poweroff(&lis3_dev);
 
-	flush_work(&hpled_led.work);
 	led_classdev_unregister(&hpled_led.led_classdev);
+	flush_work(&hpled_led.work);
 
 	return lis3lv02d_remove_fs(&lis3_dev);
 }
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a3749cb0f181..497476f637a9 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -80,6 +80,13 @@ superio_inb(int reg)
 	return inb(VAL);
 }
 
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
 static int superio_inw(int reg)
 {
 	int val;
@@ -1036,6 +1043,21 @@ static int __init it87_find(unsigned short *address,
 			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
 
 		reg = superio_inb(IT87_SIO_PINX2_REG);
+		/*
+		 * The IT8720F has no VIN7 pin, so VCCH should always be
+		 * routed internally to VIN7 with an internal divider.
+		 * Curiously, there still is a configuration bit to control
+		 * this, which means it can be set incorrectly. And even
+		 * more curiously, many boards out there are improperly
+		 * configured, even though the IT8720F datasheet claims
+		 * that the internal routing of VCCH to VIN7 is the default
+		 * setting. So we force the internal routing in this case.
+		 */
+		if (sio_data->type == it8720 && !(reg & (1 << 1))) {
+			reg |= (1 << 1);
+			superio_outb(IT87_SIO_PINX2_REG, reg);
+			pr_notice("it87: Routing internal VCCH to in7\n");
+		}
 		if (reg & (1 << 0))
 			pr_info("it87: in3 is VCC (+5V)\n");
 		if (reg & (1 << 1))
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 1fe995111841..4f84d1a76d52 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -120,7 +120,7 @@ static ssize_t show_temp(struct device *dev,
 	int temp;
 	struct k8temp_data *data = k8temp_update_device(dev);
 
-	if (data->swap_core_select)
+	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
 		core = core ? 0 : 1;
 
 	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
@@ -143,6 +143,37 @@ static struct pci_device_id k8temp_ids[] = {
 
 MODULE_DEVICE_TABLE(pci, k8temp_ids);
 
+static int __devinit is_rev_g_desktop(u8 model)
+{
+	u32 brandidx;
+
+	if (model < 0x69)
+		return 0;
+
+	if (model == 0xc1 || model == 0x6c || model == 0x7c)
+		return 0;
+
+	/*
+	 * Differentiate between AM2 and ASB1.
+	 * See "Constructing the processor Name String" in "Revision
+	 * Guide for AMD NPT Family 0Fh Processors" (33610).
+	 */
+	brandidx = cpuid_ebx(0x80000001);
+	brandidx = (brandidx >> 9) & 0x1f;
+
+	/* Single core */
+	if ((model == 0x6f || model == 0x7f) &&
+	    (brandidx == 0x7 || brandidx == 0x9 || brandidx == 0xc))
+		return 0;
+
+	/* Dual core */
+	if (model == 0x6b &&
+	    (brandidx == 0xb || brandidx == 0xc))
+		return 0;
+
+	return 1;
+}
+
 static int __devinit k8temp_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
@@ -179,12 +210,12 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 				 "wrong - check erratum #141\n");
 		}
 
-		if ((model >= 0x69) &&
-		    !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+		if (is_rev_g_desktop(model)) {
 			/*
-			 * RevG desktop CPUs (i.e. no socket S1G1 parts)
-			 * need additional offset, otherwise reported
-			 * temperature is below ambient temperature
+			 * RevG desktop CPUs (i.e. no socket S1G1 or
+			 * ASB1 parts) need additional offset,
+			 * otherwise reported temperature is below
+			 * ambient temperature
 			 */
 			data->temp_offset = 21000;
 		}
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index cf5afb9a10ab..5d5ed69851db 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -127,12 +127,14 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3)
 
 	/*
 	 * Common configuration
-	 * BDU: LSB and MSB values are not updated until both have been read.
-	 *      So the value read will always be correct.
+	 * BDU: (12 bits sensors only) LSB and MSB values are not updated until
+	 *      both have been read. So the value read will always be correct.
 	 */
-	lis3->read(lis3, CTRL_REG2, &reg);
-	reg |= CTRL2_BDU;
-	lis3->write(lis3, CTRL_REG2, reg);
+	if (lis3->whoami == LIS_DOUBLE_ID) {
+		lis3->read(lis3, CTRL_REG2, &reg);
+		reg |= CTRL2_BDU;
+		lis3->write(lis3, CTRL_REG2, reg);
+	}
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
 
@@ -361,7 +363,8 @@ static ssize_t lis3lv02d_calibrate_store(struct device *dev,
 }
 
 /* conversion btw sampling rate and the register values */
-static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560};
+static int lis3_12_rates[4] = {40, 160, 640, 2560};
+static int lis3_8_rates[2] = {100, 400};
 static ssize_t lis3lv02d_rate_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
@@ -369,8 +372,13 @@ static ssize_t lis3lv02d_rate_show(struct device *dev,
 	int val;
 
 	lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
-	val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
-	return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
+
+	if (lis3_dev.whoami == LIS_DOUBLE_ID)
+		val = lis3_12_rates[(ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4];
+	else
+		val = lis3_8_rates[(ctrl & CTRL1_DR) >> 7];
+
+	return sprintf(buf, "%d\n", val);
 }
 
 static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 3e1ff46f72d3..7cdd76f31ce3 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -103,6 +103,7 @@ enum lis3lv02d_ctrl1 {
 	CTRL1_DF1	= 0x20,
 	CTRL1_PD0	= 0x40,
 	CTRL1_PD1	= 0x80,
+	CTRL1_DR	= 0x80, /* Data rate on 8 bits */
 };
 enum lis3lv02d_ctrl2 {
 	CTRL2_DAS	= 0x01,
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index f7e70163e016..1508e0ad1830 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -870,17 +870,16 @@ static struct lm78_data *lm78_update_device(struct device *dev)
 static int __init lm78_isa_found(unsigned short address)
 {
 	int val, save, found = 0;
-
-	/* We have to request the region in two parts because some
-	   boards declare base+4 to base+7 as a PNP device */
-	if (!request_region(address, 4, "lm78")) {
-		pr_debug("lm78: Failed to request low part of region\n");
-		return 0;
-	}
-	if (!request_region(address + 4, 4, "lm78")) {
-		pr_debug("lm78: Failed to request high part of region\n");
-		release_region(address, 4);
-		return 0;
+	int port;
+
+	/* Some boards declare base+0 to base+7 as a PNP device, some base+4
+	 * to base+7 and some base+5 to base+6. So we better request each port
+	 * individually for the probing phase. */
+	for (port = address; port < address + LM78_EXTENT; port++) {
+		if (!request_region(port, 1, "lm78")) {
+			pr_debug("lm78: Failed to request port 0x%x\n", port);
+			goto release;
+		}
 	}
 
 #define REALLY_SLOW_IO
@@ -944,8 +943,8 @@ static int __init lm78_isa_found(unsigned short address)
 			val & 0x80 ? "LM79" : "LM78", (int)address);
 
  release:
-	release_region(address + 4, 4);
-	release_region(address, 4);
+	for (port--; port >= address; port--)
+		release_region(port, 1);
 	return found;
 }
 
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index 65c232a9d0c5..21d201befc2c 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -45,9 +45,7 @@ enum ltc4245_cmd {
 	LTC4245_VEEIN			= 0x19,
 	LTC4245_VEESENSE		= 0x1a,
 	LTC4245_VEEOUT			= 0x1b,
-	LTC4245_GPIOADC1		= 0x1c,
-	LTC4245_GPIOADC2		= 0x1d,
-	LTC4245_GPIOADC3		= 0x1e,
+	LTC4245_GPIOADC			= 0x1c,
 };
 
 struct ltc4245_data {
@@ -61,7 +59,7 @@ struct ltc4245_data {
 	u8 cregs[0x08];
 
 	/* Voltage registers */
-	u8 vregs[0x0f];
+	u8 vregs[0x0d];
 };
 
 static struct ltc4245_data *ltc4245_update_device(struct device *dev)
@@ -86,7 +84,7 @@ static struct ltc4245_data *ltc4245_update_device(struct device *dev)
 				data->cregs[i] = val;
 		}
 
-		/* Read voltage registers -- 0x10 to 0x1f */
+		/* Read voltage registers -- 0x10 to 0x1c */
 		for (i = 0; i < ARRAY_SIZE(data->vregs); i++) {
 			val = i2c_smbus_read_byte_data(client, i+0x10);
 			if (unlikely(val < 0))
@@ -128,9 +126,7 @@ static int ltc4245_get_voltage(struct device *dev, u8 reg)
 	case LTC4245_VEEOUT:
 		voltage = regval * -55;
 		break;
-	case LTC4245_GPIOADC1:
-	case LTC4245_GPIOADC2:
-	case LTC4245_GPIOADC3:
+	case LTC4245_GPIOADC:
 		voltage = regval * 10;
 		break;
 	default:
@@ -297,9 +293,7 @@ LTC4245_ALARM(in7_min_alarm,	(1 << 2),	LTC4245_FAULT2);
 LTC4245_ALARM(in8_min_alarm,	(1 << 3),	LTC4245_FAULT2);
 
 /* GPIO voltages */
-LTC4245_VOLTAGE(in9_input,			LTC4245_GPIOADC1);
-LTC4245_VOLTAGE(in10_input,			LTC4245_GPIOADC2);
-LTC4245_VOLTAGE(in11_input,			LTC4245_GPIOADC3);
+LTC4245_VOLTAGE(in9_input,			LTC4245_GPIOADC);
 
 /* Power Consumption (virtual) */
 LTC4245_POWER(power1_input,			LTC4245_12VSENSE);
@@ -342,8 +336,6 @@ static struct attribute *ltc4245_attributes[] = {
 	&sensor_dev_attr_in8_min_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in9_input.dev_attr.attr,
-	&sensor_dev_attr_in10_input.dev_attr.attr,
-	&sensor_dev_attr_in11_input.dev_attr.attr,
 
 	&sensor_dev_attr_power1_input.dev_attr.attr,
 	&sensor_dev_attr_power2_input.dev_attr.attr,
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 4a64b85d4ec9..68e69a49633c 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1610,11 +1610,8 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
 
 static int __init pc87360_device_add(unsigned short address)
 {
-	struct resource res = {
-		.name	= "pc87360",
-		.flags	= IORESOURCE_IO,
-	};
-	int err, i;
+	struct resource res[3];
+	int err, i, res_count;
 
 	pdev = platform_device_alloc("pc87360", address);
 	if (!pdev) {
@@ -1623,22 +1620,28 @@ static int __init pc87360_device_add(unsigned short address)
 		goto exit;
 	}
 
+	memset(res, 0, 3 * sizeof(struct resource));
+	res_count = 0;
 	for (i = 0; i < 3; i++) {
 		if (!extra_isa[i])
 			continue;
-		res.start = extra_isa[i];
-		res.end = extra_isa[i] + PC87360_EXTENT - 1;
+		res[res_count].start = extra_isa[i];
+		res[res_count].end = extra_isa[i] + PC87360_EXTENT - 1;
+		res[res_count].name = "pc87360",
+		res[res_count].flags = IORESOURCE_IO,
 
-		err = acpi_check_resource_conflict(&res);
+		err = acpi_check_resource_conflict(&res[res_count]);
 		if (err)
 			goto exit_device_put;
 
-		err = platform_device_add_resources(pdev, &res, 1);
-		if (err) {
-			printk(KERN_ERR "pc87360: Device resource[%d] "
-			       "addition failed (%d)\n", i, err);
-			goto exit_device_put;
-		}
+		res_count++;
+	}
+
+	err = platform_device_add_resources(pdev, res, res_count);
+	if (err) {
+		printk(KERN_ERR "pc87360: Device resources addition failed "
+		       "(%d)\n", err);
+		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index ebe38b680ee3..fbc997ee67d9 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -302,13 +302,13 @@ error_ret:
  **/
 static inline int sht15_calc_temp(struct sht15_data *data)
 {
-	int d1 = 0;
+	int d1 = temppoints[0].d1;
 	int i;
 
-	for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+	for (i = ARRAY_SIZE(temppoints) - 1; i > 0; i--)
 		/* Find pointer to interpolate */
 		if (data->supply_uV > temppoints[i - 1].vdd) {
-			d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+			d1 = (data->supply_uV - temppoints[i - 1].vdd)
 				* (temppoints[i].d1 - temppoints[i - 1].d1)
 				/ (temppoints[i].vdd - temppoints[i - 1].vdd)
 				+ temppoints[i - 1].d1;
@@ -332,12 +332,12 @@ static inline int sht15_calc_humid(struct sht15_data *data)
 
 	const int c1 = -4;
 	const int c2 = 40500; /* x 10 ^ -6 */
-	const int c3 = 2800; /* x10 ^ -9 */
+	const int c3 = -2800; /* x10 ^ -9 */
 
 	RHlinear = c1*1000
 		+ c2 * data->val_humid/1000
 		+ (data->val_humid * data->val_humid * c3)/1000000;
-	return (temp - 25000) * (10000 + 800 * data->val_humid)
+	return (temp - 25000) * (10000 + 80 * data->val_humid)
 		/ 1000000 + RHlinear;
 }
 
@@ -541,7 +541,12 @@ static int __devinit sht15_probe(struct platform_device *pdev)
 /* If a regulator is available, query what the supply voltage actually is!*/
 	data->reg = regulator_get(data->dev, "vcc");
 	if (!IS_ERR(data->reg)) {
-		data->supply_uV = regulator_get_voltage(data->reg);
+		int voltage;
+
+		voltage = regulator_get_voltage(data->reg);
+		if (voltage)
+			data->supply_uV = voltage;
+
 		regulator_enable(data->reg);
 		/* setup a notifier block to update this if another device
 		 *  causes the voltage to change */
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 20924343431b..d3a786b36d6a 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -62,9 +62,9 @@ static const u8 TMP421_TEMP_LSB[4]		= { 0x10, 0x11, 0x12, 0x13 };
 #define TMP423_DEVICE_ID			0x23
 
 static const struct i2c_device_id tmp421_id[] = {
-	{ "tmp421", tmp421 },
-	{ "tmp422", tmp422 },
-	{ "tmp423", tmp423 },
+	{ "tmp421", 2 },
+	{ "tmp422", 3 },
+	{ "tmp423", 4 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tmp421_id);
@@ -74,21 +74,23 @@ struct tmp421_data {
 	struct mutex update_lock;
 	char valid;
 	unsigned long last_updated;
-	int kind;
+	int channels;
 	u8 config;
 	s16 temp[4];
 };
 
 static int temp_from_s16(s16 reg)
 {
-	int temp = reg;
+	/* Mask out status bits */
+	int temp = reg & ~0xf;
 
 	return (temp * 1000 + 128) / 256;
 }
 
 static int temp_from_u16(u16 reg)
 {
-	int temp = reg;
+	/* Mask out status bits */
+	int temp = reg & ~0xf;
 
 	/* Add offset for extended temperature range. */
 	temp -= 64 * 256;
@@ -108,7 +110,7 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)
 		data->config = i2c_smbus_read_byte_data(client,
 			TMP421_CONFIG_REG_1);
 
-		for (i = 0; i <= data->kind; i++) {
+		for (i = 0; i < data->channels; i++) {
 			data->temp[i] = i2c_smbus_read_byte_data(client,
 				TMP421_TEMP_MSB[i]) << 8;
 			data->temp[i] |= i2c_smbus_read_byte_data(client,
@@ -167,7 +169,7 @@ static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
 	devattr = container_of(a, struct device_attribute, attr);
 	index = to_sensor_dev_attr(devattr)->index;
 
-	if (data->kind > index)
+	if (index < data->channels)
 		return a->mode;
 
 	return 0;
@@ -275,7 +277,7 @@ static int tmp421_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
-	data->kind = id->driver_data;
+	data->channels = id->driver_data;
 
 	err = tmp421_init_client(client);
 	if (err)
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d27ed1bac002..f0b6883fb4da 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1818,17 +1818,17 @@ static int __init
 w83781d_isa_found(unsigned short address)
 {
 	int val, save, found = 0;
-
-	/* We have to request the region in two parts because some
-	   boards declare base+4 to base+7 as a PNP device */
-	if (!request_region(address, 4, "w83781d")) {
-		pr_debug("w83781d: Failed to request low part of region\n");
-		return 0;
-	}
-	if (!request_region(address + 4, 4, "w83781d")) {
-		pr_debug("w83781d: Failed to request high part of region\n");
-		release_region(address, 4);
-		return 0;
+	int port;
+
+	/* Some boards declare base+0 to base+7 as a PNP device, some base+4
+	 * to base+7 and some base+5 to base+6. So we better request each port
+	 * individually for the probing phase. */
+	for (port = address; port < address + W83781D_EXTENT; port++) {
+		if (!request_region(port, 1, "w83781d")) {
+			pr_debug("w83781d: Failed to request port 0x%x\n",
+				 port);
+			goto release;
+		}
 	}
 
 #define REALLY_SLOW_IO
@@ -1902,8 +1902,8 @@ w83781d_isa_found(unsigned short address)
 			val == 0x30 ? "W83782D" : "W83781D", (int)address);
 
  release:
-	release_region(address + 4, 4);
-	release_region(address, 4);
+	for (port--; port >= address; port--)
+		release_region(port, 1);
 	return found;
 }