Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 "Major changes:

   - lots of devicetree additions for existing drivers.  I tried hard to
     make sure the bindings are proper.  In more complicated cases, I
     requested acks from people having more experience with them than
     me.  That took a bit of extra time and also some time went into
     discussions with developers about what bindings are and what not.
     I have the feeling that the workflow with bindings should be
     improved to scale better.  I will spend some more thought on
     this...

   - i2c-muxes are succesfully used meanwhile, so we dropped
     EXPERIMENTAL for them and renamed the drivers to a standard pattern
     to match the rest of the subsystem.  They can also be used with
     devicetree now.

   - ixp2000 was removed since the whole platform goes away.

   - cleanups (strlcpy instead of strcpy, NULL instead of 0)

   - The rest is typical driver fixes I assume.

  All patches have been in linux-next at least since v3.4-rc6."

Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
same patch already having come in through the arm/soc trees, with
additional patches on top of it.

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
  i2c: davinci: Free requested IRQ in remove
  i2c: ocores: register OF i2c devices
  i2c: tegra: notify transfer-complete after clearing status.
  I2C: xiic: Add OF binding support
  i2c: Rename last mux driver to standard pattern
  i2c: tegra: fix 10bit address configuration
  i2c: muxes: rename first set of drivers to a standard pattern
  of/i2c: implement of_find_i2c_adapter_by_node
  i2c: implement i2c_verify_adapter
  i2c-s3c2410: Add HDMIPHY quirk for S3C2440
  i2c-s3c2410: Rework device type handling
  i2c: muxes are not EXPERIMENTAL anymore
  i2c/of: Automatically populate i2c mux busses from device tree data.
  i2c: Add a struct device * parameter to i2c_add_mux_adapter()
  of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
  i2c: designware: Add clk_{un}prepare() support
  i2c: designware: add PM support
  i2c: ixp2000: remove driver
  i2c: pnx: add device tree support
  i2c: imx: don't use strcpy but strlcpy
  ...

1 files changed, 65 insertions, 44 deletions

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 737f7218a32c..fa0b13490873 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -44,8 +44,12 @@
 #include <plat/regs-iic.h>
 #include <plat/iic.h>
 
-/* i2c controller state */
+/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
+#define QUIRK_S3C2440		(1 << 0)
+#define QUIRK_HDMIPHY		(1 << 1)
+#define QUIRK_NO_GPIO		(1 << 2)
 
+/* i2c controller state */
 enum s3c24xx_i2c_state {
 	STATE_IDLE,
 	STATE_START,
@@ -54,14 +58,10 @@ enum s3c24xx_i2c_state {
 	STATE_STOP
 };
 
-enum s3c24xx_i2c_type {
-	TYPE_S3C2410,
-	TYPE_S3C2440,
-};
-
 struct s3c24xx_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
+	unsigned int            quirks;
 	unsigned int		suspended:1;
 
 	struct i2c_msg		*msg;
@@ -88,26 +88,45 @@ struct s3c24xx_i2c {
 #endif
 };
 
-/* default platform data removed, dev should always carry data. */
+static struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-i2c",
+		.driver_data	= 0,
+	}, {
+		.name		= "s3c2440-i2c",
+		.driver_data	= QUIRK_S3C2440,
+	}, {
+		.name		= "s3c2440-hdmiphy-i2c",
+		.driver_data	= QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
+	}, { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_i2c_match[] = {
+	{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
+	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
+	{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
+	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
+#endif
 
-/* s3c24xx_i2c_is2440()
+/* s3c24xx_get_device_quirks
  *
- * return true is this is an s3c2440
+ * Get controller type either from device tree or platform device variant.
 */
 
-static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
+static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(i2c->dev);
-	enum s3c24xx_i2c_type type;
-
-#ifdef CONFIG_OF
-	if (i2c->dev->of_node)
-		return of_device_is_compatible(i2c->dev->of_node,
-				"samsung,s3c2440-i2c");
-#endif
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node);
+		return (unsigned int)match->data;
+	}
 
-	type = platform_get_device_id(pdev)->driver_data;
-	return type == TYPE_S3C2440;
+	return platform_get_device_id(pdev)->driver_data;
 }
 
 /* s3c24xx_i2c_master_complete
@@ -471,6 +490,13 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 	unsigned long iicstat;
 	int timeout = 400;
 
+	/* the timeout for HDMIPHY is reduced to 10 ms because
+	 * the hangup is expected to happen, so waiting 400 ms
+	 * causes only unnecessary system hangup
+	 */
+	if (i2c->quirks & QUIRK_HDMIPHY)
+		timeout = 10;
+
 	while (timeout-- > 0) {
 		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 
@@ -480,6 +506,15 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 		msleep(1);
 	}
 
+	/* hang-up of bus dedicated for HDMIPHY occurred, resetting */
+	if (i2c->quirks & QUIRK_HDMIPHY) {
+		writel(0, i2c->regs + S3C2410_IICCON);
+		writel(0, i2c->regs + S3C2410_IICSTAT);
+		writel(0, i2c->regs + S3C2410_IICDS);
+
+		return 0;
+	}
+
 	return -ETIMEDOUT;
 }
 
@@ -676,7 +711,7 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 
 	writel(iiccon, i2c->regs + S3C2410_IICCON);
 
-	if (s3c24xx_i2c_is2440(i2c)) {
+	if (i2c->quirks & QUIRK_S3C2440) {
 		unsigned long sda_delay;
 
 		if (pdata->sda_delay) {
@@ -761,6 +796,9 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 {
 	int idx, gpio, ret;
 
+	if (i2c->quirks & QUIRK_NO_GPIO)
+		return 0;
+
 	for (idx = 0; idx < 2; idx++) {
 		gpio = of_get_gpio(i2c->dev->of_node, idx);
 		if (!gpio_is_valid(gpio)) {
@@ -785,6 +823,10 @@ free_gpio:
 static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
 {
 	unsigned int idx;
+
+	if (i2c->quirks & QUIRK_NO_GPIO)
+		return;
+
 	for (idx = 0; idx < 2; idx++)
 		gpio_free(i2c->gpios[idx]);
 }
@@ -906,6 +948,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto err_noclk;
 	}
 
+	i2c->quirks = s3c24xx_get_device_quirks(pdev);
 	if (pdata)
 		memcpy(i2c->pdata, pdata, sizeof(*pdata));
 	else
@@ -1110,28 +1153,6 @@ static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
 
 /* device driver for platform bus bits */
 
-static struct platform_device_id s3c24xx_driver_ids[] = {
-	{
-		.name		= "s3c2410-i2c",
-		.driver_data	= TYPE_S3C2410,
-	}, {
-		.name		= "s3c2440-i2c",
-		.driver_data	= TYPE_S3C2440,
-	}, { },
-};
-MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c24xx_i2c_match[] = {
-	{ .compatible = "samsung,s3c2410-i2c" },
-	{ .compatible = "samsung,s3c2440-i2c" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
-#else
-#define s3c24xx_i2c_match NULL
-#endif
-
 static struct platform_driver s3c24xx_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
@@ -1140,7 +1161,7 @@ static struct platform_driver s3c24xx_i2c_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "s3c-i2c",
 		.pm	= S3C24XX_DEV_PM_OPS,
-		.of_match_table = s3c24xx_i2c_match,
+		.of_match_table = of_match_ptr(s3c24xx_i2c_match),
 	},
 };