Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

Pull i2c updates from Jean Delvare.

Fix up trivial conflict in drivers/i2c/busses/i2c-gpio.c due to include
file cleanup clashing with DT support addition (which did the same
cleanup)

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-algo-bit: Don't resched on clock stretching
  i2c: Update the FSF address
  i2c: Convert drivers/i2c/muxes/* to use module_i2c_driver()
  i2c-i801: Use usleep_range to wait for command completion
  i2c-i801: Add device IDs for Intel Lynx Point
  i2c-isch: Decrease delay in command completion check loop
  i2c-gpio: Use linux/gpio.h rather than asm/gpio.h

3 files changed, 21 insertions, 17 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 71c1b0a7535c..d2c5095deeac 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -103,6 +103,7 @@ config I2C_I801
 	    Patsburg (PCH)
 	    DH89xxCC (PCH)
 	    Panther Point (PCH)
+	    Lynx Point (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 5d2e2816831f..ae2945a5e007 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -2,7 +2,7 @@
     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
     <mdsxyz123@yahoo.com>
-    Copyright (C) 2007, 2008   Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2007 - 2012  Jean Delvare <khali@linux-fr.org>
     Copyright (C) 2010         Intel Corporation,
                                David Woodhouse <dwmw2@infradead.org>
 
@@ -51,6 +51,7 @@
   Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
   DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
   Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
+  Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -105,7 +106,7 @@
 #define SMBHSTCNT_KILL		2
 
 /* Other settings */
-#define MAX_TIMEOUT		100
+#define MAX_RETRIES		400
 #define ENABLE_INT9		0	/* set to 0x01 to enable - untested */
 
 /* I801 command constants */
@@ -145,6 +146,7 @@
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -215,7 +217,7 @@ static int i801_check_post(struct i801_priv *priv, int status, int timeout)
 		dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
 		outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
 		       SMBHSTCNT(priv));
-		msleep(1);
+		usleep_range(1000, 2000);
 		outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
 		       SMBHSTCNT(priv));
 
@@ -272,11 +274,11 @@ static int i801_transaction(struct i801_priv *priv, int xact)
 
 	/* We will always wait for a fraction of a second! */
 	do {
-		msleep(1);
+		usleep_range(250, 500);
 		status = inb_p(SMBHSTSTS(priv));
-	} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+	} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
 
-	result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
+	result = i801_check_post(priv, status, timeout > MAX_RETRIES);
 	if (result < 0)
 		return result;
 
@@ -291,12 +293,12 @@ static void i801_wait_hwpec(struct i801_priv *priv)
 	int status;
 
 	do {
-		msleep(1);
+		usleep_range(250, 500);
 		status = inb_p(SMBHSTSTS(priv));
 	} while ((!(status & SMBHSTSTS_INTR))
-		 && (timeout++ < MAX_TIMEOUT));
+		 && (timeout++ < MAX_RETRIES));
 
-	if (timeout > MAX_TIMEOUT)
+	if (timeout > MAX_RETRIES)
 		dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n");
 
 	outb_p(status, SMBHSTSTS(priv));
@@ -380,12 +382,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 		/* We will always wait for a fraction of a second! */
 		timeout = 0;
 		do {
-			msleep(1);
+			usleep_range(250, 500);
 			status = inb_p(SMBHSTSTS(priv));
 		} while ((!(status & SMBHSTSTS_BYTE_DONE))
-			 && (timeout++ < MAX_TIMEOUT));
+			 && (timeout++ < MAX_RETRIES));
 
-		result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
+		result = i801_check_post(priv, status, timeout > MAX_RETRIES);
 		if (result < 0)
 			return result;
 
@@ -633,6 +635,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index 6561d275b8cf..f90a6057508d 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -47,7 +47,7 @@
 #define SMBBLKDAT	(0x20 + sch_smba)
 
 /* Other settings */
-#define MAX_TIMEOUT	500
+#define MAX_RETRIES	5000
 
 /* I2C constants */
 #define SCH_QUICK		0x00
@@ -68,7 +68,7 @@ static int sch_transaction(void)
 {
 	int temp;
 	int result = 0;
-	int timeout = 0;
+	int retries = 0;
 
 	dev_dbg(&sch_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
 		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT),
@@ -100,12 +100,12 @@ static int sch_transaction(void)
 	outb(inb(SMBHSTCNT) | 0x10, SMBHSTCNT);
 
 	do {
-		msleep(1);
+		usleep_range(100, 200);
 		temp = inb(SMBHSTSTS) & 0x0f;
-	} while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
+	} while ((temp & 0x08) && (retries++ < MAX_RETRIES));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout > MAX_TIMEOUT) {
+	if (retries > MAX_RETRIES) {
 		dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
 		result = -ETIMEDOUT;
 	}