diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/i2c/chips | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/i2c/chips')
41 files changed, 27600 insertions, 0 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig new file mode 100644 index 000000000000..74d23cfce2a3 --- /dev/null +++ b/drivers/i2c/chips/Kconfig @@ -0,0 +1,443 @@ +# +# I2C Sensor device configuration +# + +menu "Hardware Sensors Chip support" + depends on I2C + +config I2C_SENSOR + tristate + default n + +config SENSORS_ADM1021 + tristate "Analog Devices ADM1021 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1021 + and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, + Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, + and the XEON processor built-in sensor. + + This driver can also be built as a module. If so, the module + will be called adm1021. + +config SENSORS_ADM1025 + tristate "Analog Devices ADM1025 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1025 + and Philips NE1619 sensor chips. + This driver can also be built as a module. If so, the module + will be called adm1025. + +config SENSORS_ADM1026 + tristate "Analog Devices ADM1026 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1026 + This driver can also be built as a module. If so, the module + will be called adm1026. + +config SENSORS_ADM1031 + tristate "Analog Devices ADM1031 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1031 + and ADM1030 sensor chips. + This driver can also be built as a module. If so, the module + will be called adm1031. + +config SENSORS_ASB100 + tristate "Asus ASB100 Bach" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the ASB100 Bach sensor + chip found on some Asus mainboards. + + This driver can also be built as a module. If so, the module + will be called asb100. + +config SENSORS_DS1621 + tristate "Dallas Semiconductor DS1621 and DS1625" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Dallas Semiconductor + DS1621 and DS1625 sensor chips. + + This driver can also be built as a module. If so, the module + will be called ds1621. + +config SENSORS_FSCHER + tristate "FSC Hermes" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Fujitsu Siemens + Computers Hermes sensor chips. + + This driver can also be built as a module. If so, the module + will be called fscher. + +config SENSORS_FSCPOS + tristate "FSC Poseidon" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Fujitsu Siemens + Computers Poseidon sensor chips. + + This driver can also be built as a module. If so, the module + will be called fscpos. + +config SENSORS_GL518SM + tristate "Genesys Logic GL518SM" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Genesys Logic GL518SM + sensor chips. + + This driver can also be built as a module. If so, the module + will be called gl518sm. + +config SENSORS_GL520SM + tristate "Genesys Logic GL520SM" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Genesys Logic GL520SM + sensor chips. + + This driver can also be built as a module. If so, the module + will be called gl520sm. + +config SENSORS_IT87 + tristate "ITE IT87xx and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for ITE IT87xx sensor chips + and clones: SiS960. + + This driver can also be built as a module. If so, the module + will be called it87. + +config SENSORS_LM63 + tristate "National Semiconductor LM63" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the National Semiconductor + LM63 remote diode digital temperature sensor with integrated fan + control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) + motherboard, among others. + + This driver can also be built as a module. If so, the module + will be called lm63. + +config SENSORS_LM75 + tristate "National Semiconductor LM75 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM75 + sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in + 9-bit precision mode), and TelCom (now Microchip) TCN75. + + The DS75 and DS1775 in 10- to 12-bit precision modes will require + a force module parameter. The driver will not handle the extra + precision anyhow. + + This driver can also be built as a module. If so, the module + will be called lm75. + +config SENSORS_LM77 + tristate "National Semiconductor LM77" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM77 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm77. + +config SENSORS_LM78 + tristate "National Semiconductor LM78 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM78, + LM78-J and LM79. This can also be built as a module which can be + inserted and removed while the kernel is running. + + This driver can also be built as a module. If so, the module + will be called lm78. + +config SENSORS_LM80 + tristate "National Semiconductor LM80" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor + LM80 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm80. + +config SENSORS_LM83 + tristate "National Semiconductor LM83" + depends on I2C + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor + LM83 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm83. + +config SENSORS_LM85 + tristate "National Semiconductor LM85 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM85 + sensor chips and clones: ADT7463 and ADM1027. + + This driver can also be built as a module. If so, the module + will be called lm85. + +config SENSORS_LM87 + tristate "National Semiconductor LM87" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM87 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm87. + +config SENSORS_LM90 + tristate "National Semiconductor LM90 and compatibles" + depends on I2C + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM90, + LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and + MAX6658 sensor chips. + + The Analog Devices ADT7461 sensor chip is also supported, but only + if found in ADM1032 compatibility mode. + + This driver can also be built as a module. If so, the module + will be called lm90. + +config SENSORS_LM92 + tristate "National Semiconductor LM92 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM92 + and Maxim MAX6635 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm92. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_PC87360 + tristate "National Semiconductor PC87360 family" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC8736x Super-I/O chips. + The PC87360, PC87363 and PC87364 only have fan monitoring and + control. The PC87365 and PC87366 additionally have voltage and + temperature monitoring. + + This driver can also be built as a module. If so, the module + will be called pc87360. + +config SENSORS_SMSC47B397 + tristate "SMSC LPC47B397-NC" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the SMSC LPC47B397-NC + sensor chip. + + This driver can also be built as a module. If so, the module + will be called smsc47b397. + +config SENSORS_SIS5595 + tristate "Silicon Integrated Systems Corp. SiS5595" + depends on I2C && PCI && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the integrated sensors in + SiS5595 South Bridges. + + This driver can also be built as a module. If so, the module + will be called sis5595. + +config SENSORS_SMSC47M1 + tristate "SMSC LPC47M10x and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the integrated fan + monitoring and control capabilities of the SMSC LPC47B27x, + LPC47M10x, LPC47M13x and LPC47M14x chips. + + This driver can also be built as a module. If so, the module + will be called smsc47m1. + +config SENSORS_VIA686A + tristate "VIA686A" + depends on I2C && PCI && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the integrated sensors in + Via 686A/B South Bridges. + + This driver can also be built as a module. If so, the module + will be called via686a. + +config SENSORS_W83781D + tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the Winbond W8378x series + of sensor chips: the W83781D, W83782D, W83783S and W83627HF, + and the similar Asus AS99127F. + + This driver can also be built as a module. If so, the module + will be called w83781d. + +config SENSORS_W83L785TS + tristate "Winbond W83L785TS-S" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the Winbond W83L785TS-S + sensor chip, which is used on the Asus A7N8X, among other + motherboards. + + This driver can also be built as a module. If so, the module + will be called w83l785ts. + +config SENSORS_W83627HF + tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the Winbond W836X7 series + of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF + + This driver can also be built as a module. If so, the module + will be called w83627hf. + +endmenu + +menu "Other I2C Chip support" + depends on I2C + +config SENSORS_DS1337 + tristate "Dallas Semiconductor DS1337 Real Time Clock" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Dallas Semiconductor + DS1337 real-time clock chips. + + This driver can also be built as a module. If so, the module + will be called ds1337. + +config SENSORS_EEPROM + tristate "EEPROM reader" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get read-only access to the EEPROM data + available on modern memory DIMMs and Sony Vaio laptops. Such + EEPROMs could theoretically be available on other devices as well. + + This driver can also be built as a module. If so, the module + will be called eeprom. + +config SENSORS_PCF8574 + tristate "Philips PCF8574 and PCF8574A" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Philips PCF8574 and + PCF8574A chips. + + This driver can also be built as a module. If so, the module + will be called pcf8574. + +config SENSORS_PCF8591 + tristate "Philips PCF8591" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Philips PCF8591 chips. + + This driver can also be built as a module. If so, the module + will be called pcf8591. + +config SENSORS_RTC8564 + tristate "Epson 8564 RTC chip" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the Epson 8564 RTC chip. + + This driver can also be built as a module. If so, the module + will be called i2c-rtc8564. + +config ISP1301_OMAP + tristate "Philips ISP1301 with OMAP OTG" + depends on I2C && ARCH_OMAP_OTG + help + If you say yes here you get support for the Philips ISP1301 + USB-On-The-Go transceiver working with the OMAP OTG controller. + The ISP1301 is used in products including H2 and H3 development + boards for Texas Instruments OMAP processors. + + This driver can also be built as a module. If so, the module + will be called isp1301_omap. + +config SENSORS_M41T00 + tristate "ST M41T00 RTC chip" + depends on I2C && PPC32 + help + If you say yes here you get support for the ST M41T00 RTC chip. + + This driver can also be built as a module. If so, the module + will be called m41t00. + +endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile new file mode 100644 index 000000000000..65599161a172 --- /dev/null +++ b/drivers/i2c/chips/Makefile @@ -0,0 +1,48 @@ +# +# Makefile for the kernel hardware sensors chip drivers. +# + +# asb100, then w83781d go first, as they can override other drivers' addresses. +obj-$(CONFIG_SENSORS_ASB100) += asb100.o +obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o +obj-$(CONFIG_SENSORS_W83781D) += w83781d.o + +obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o +obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o +obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o +obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o +obj-$(CONFIG_SENSORS_DS1337) += ds1337.o +obj-$(CONFIG_SENSORS_DS1621) += ds1621.o +obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o +obj-$(CONFIG_SENSORS_FSCHER) += fscher.o +obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o +obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o +obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o +obj-$(CONFIG_SENSORS_IT87) += it87.o +obj-$(CONFIG_SENSORS_LM63) += lm63.o +obj-$(CONFIG_SENSORS_LM75) += lm75.o +obj-$(CONFIG_SENSORS_LM77) += lm77.o +obj-$(CONFIG_SENSORS_LM78) += lm78.o +obj-$(CONFIG_SENSORS_LM80) += lm80.o +obj-$(CONFIG_SENSORS_LM83) += lm83.o +obj-$(CONFIG_SENSORS_LM85) += lm85.o +obj-$(CONFIG_SENSORS_LM87) += lm87.o +obj-$(CONFIG_SENSORS_LM90) += lm90.o +obj-$(CONFIG_SENSORS_LM92) += lm92.o +obj-$(CONFIG_SENSORS_MAX1619) += max1619.o +obj-$(CONFIG_SENSORS_M41T00) += m41t00.o +obj-$(CONFIG_SENSORS_PC87360) += pc87360.o +obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o +obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o +obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o +obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o +obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o +obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o +obj-$(CONFIG_SENSORS_VIA686A) += via686a.o +obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o +obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + +ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) +EXTRA_CFLAGS += -DDEBUG +endif + diff --git a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c new file mode 100644 index 000000000000..9c59a370b6d9 --- /dev/null +++ b/drivers/i2c/chips/adm1021.c @@ -0,0 +1,411 @@ +/* + adm1021.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and + Philip Edelbrock <phil@netroedge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, + 0x29, 0x2a, 0x2b, + 0x4c, 0x4d, 0x4e, + I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066); + +/* adm1021 constants specified below */ + +/* The adm1021 registers */ +/* Read-only */ +#define ADM1021_REG_TEMP 0x00 +#define ADM1021_REG_REMOTE_TEMP 0x01 +#define ADM1021_REG_STATUS 0x02 +#define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/ +#define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */ +#define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */ +/* These use different addresses for reading/writing */ +#define ADM1021_REG_CONFIG_R 0x03 +#define ADM1021_REG_CONFIG_W 0x09 +#define ADM1021_REG_CONV_RATE_R 0x04 +#define ADM1021_REG_CONV_RATE_W 0x0A +/* These are for the ADM1023's additional precision on the remote temp sensor */ +#define ADM1021_REG_REM_TEMP_PREC 0x010 +#define ADM1021_REG_REM_OFFSET 0x011 +#define ADM1021_REG_REM_OFFSET_PREC 0x012 +#define ADM1021_REG_REM_TOS_PREC 0x013 +#define ADM1021_REG_REM_THYST_PREC 0x014 +/* limits */ +#define ADM1021_REG_TOS_R 0x05 +#define ADM1021_REG_TOS_W 0x0B +#define ADM1021_REG_REMOTE_TOS_R 0x07 +#define ADM1021_REG_REMOTE_TOS_W 0x0D +#define ADM1021_REG_THYST_R 0x06 +#define ADM1021_REG_THYST_W 0x0C +#define ADM1021_REG_REMOTE_THYST_R 0x08 +#define ADM1021_REG_REMOTE_THYST_W 0x0E +/* write-only */ +#define ADM1021_REG_ONESHOT 0x0F + + +/* Conversions. Rounding and limit checking is only done on the TO_REG + variants. Note that you should be a bit careful with which arguments + these macros are called: arguments may be evaluated more than once. + Fixing this is just not worth it. */ +/* Conversions note: 1021 uses normal integer signed-byte format*/ +#define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000) +#define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255)) + +/* Initial values */ + +/* Note: Even though I left the low and high limits named os and hyst, +they don't quite work like a thermostat the way the LM75 does. I.e., +a lower temp than THYST actually triggers an alarm instead of +clearing it. Weird, ey? --Phil */ + +/* Each client has this additional data */ +struct adm1021_data { + struct i2c_client client; + enum chips type; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 temp_max; /* Register values */ + u8 temp_hyst; + u8 temp_input; + u8 remote_temp_max; + u8 remote_temp_hyst; + u8 remote_temp_input; + u8 alarms; + /* special values for ADM1021 only */ + u8 die_code; + /* Special values for ADM1023 only */ + u8 remote_temp_prec; + u8 remote_temp_os_prec; + u8 remote_temp_hyst_prec; + u8 remote_temp_offset; + u8 remote_temp_offset_prec; +}; + +static int adm1021_attach_adapter(struct i2c_adapter *adapter); +static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); +static void adm1021_init_client(struct i2c_client *client); +static int adm1021_detach_client(struct i2c_client *client); +static int adm1021_read_value(struct i2c_client *client, u8 reg); +static int adm1021_write_value(struct i2c_client *client, u8 reg, + u16 value); +static struct adm1021_data *adm1021_update_device(struct device *dev); + +/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ +static int read_only = 0; + + +/* This is the driver that will be inserted */ +static struct i2c_driver adm1021_driver = { + .owner = THIS_MODULE, + .name = "adm1021", + .id = I2C_DRIVERID_ADM1021, + .flags = I2C_DF_NOTIFY, + .attach_adapter = adm1021_attach_adapter, + .detach_client = adm1021_detach_client, +}; + +#define show(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct adm1021_data *data = adm1021_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ +} +show(temp_max); +show(temp_hyst); +show(temp_input); +show(remote_temp_max); +show(remote_temp_hyst); +show(remote_temp_input); + +#define show2(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct adm1021_data *data = adm1021_update_device(dev); \ + return sprintf(buf, "%d\n", data->value); \ +} +show2(alarms); +show2(die_code); + +#define set(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct adm1021_data *data = i2c_get_clientdata(client); \ + int temp = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP_TO_REG(temp); \ + adm1021_write_value(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} +set(temp_max, ADM1021_REG_TOS_W); +set(temp_hyst, ADM1021_REG_THYST_W); +set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W); +set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W); + +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); +static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); +static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max); +static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst); +static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static DEVICE_ATTR(die_code, S_IRUGO, show_die_code, NULL); + + +static int adm1021_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, adm1021_detect); +} + +static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i; + struct i2c_client *new_client; + struct adm1021_data *data; + int err = 0; + const char *type_name = ""; + + /* Make sure we aren't probing the ISA bus!! This is just a safety check + at this moment; i2c_detect really won't call us. */ +#ifdef DEBUG + if (i2c_is_isa_adapter(adapter)) { + dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n"); + return 0; + } +#endif + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto error0; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access adm1021_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { + err = -ENOMEM; + goto error0; + } + memset(data, 0, sizeof(struct adm1021_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &adm1021_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + if (kind < 0) { + if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00 + || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00 + || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) { + err = -ENODEV; + goto error1; + } + } + + /* Determine the chip type. */ + if (kind <= 0) { + i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID); + if (i == 0x41) + if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030) + kind = adm1023; + else + kind = adm1021; + else if (i == 0x49) + kind = thmc10; + else if (i == 0x23) + kind = gl523sm; + else if ((i == 0x4d) && + (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01)) + kind = max1617a; + else if (i == 0x54) + kind = mc1066; + /* LM84 Mfr ID in a different place, and it has more unused bits */ + else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00 + && (kind == 0 /* skip extra detection */ + || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00 + && (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00))) + kind = lm84; + else + kind = max1617; + } + + if (kind == max1617) { + type_name = "max1617"; + } else if (kind == max1617a) { + type_name = "max1617a"; + } else if (kind == adm1021) { + type_name = "adm1021"; + } else if (kind == adm1023) { + type_name = "adm1023"; + } else if (kind == thmc10) { + type_name = "thmc10"; + } else if (kind == lm84) { + type_name = "lm84"; + } else if (kind == gl523sm) { + type_name = "gl523sm"; + } else if (kind == mc1066) { + type_name = "mc1066"; + } + + /* Fill in the remaining client fields and put it into the global list */ + strlcpy(new_client->name, type_name, I2C_NAME_SIZE); + data->type = kind; + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto error1; + + /* Initialize the ADM1021 chip */ + if (kind != lm84) + adm1021_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_alarms); + if (data->type == adm1021) + device_create_file(&new_client->dev, &dev_attr_die_code); + + return 0; + +error1: + kfree(data); +error0: + return err; +} + +static void adm1021_init_client(struct i2c_client *client) +{ + /* Enable ADC and disable suspend mode */ + adm1021_write_value(client, ADM1021_REG_CONFIG_W, + adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF); + /* Set Conversion rate to 1/sec (this can be tinkered with) */ + adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04); +} + +static int adm1021_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +/* All registers are byte-sized */ +static int adm1021_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if (!read_only) + return i2c_smbus_write_byte_data(client, reg, value); + return 0; +} + +static struct adm1021_data *adm1021_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1021_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting adm1021 update\n"); + + data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP); + data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R); + data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R); + data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP); + data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R); + data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R); + data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c; + if (data->type == adm1021) + data->die_code = adm1021_read_value(client, ADM1021_REG_DIE_CODE); + if (data->type == adm1023) { + data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC); + data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC); + data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC); + data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET); + data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC); + } + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_adm1021_init(void) +{ + return i2c_add_driver(&adm1021_driver); +} + +static void __exit sensors_adm1021_exit(void) +{ + i2c_del_driver(&adm1021_driver); +} + +MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and " + "Philip Edelbrock <phil@netroedge.com>"); +MODULE_DESCRIPTION("adm1021 driver"); +MODULE_LICENSE("GPL"); + +module_param(read_only, bool, 0); +MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); + +module_init(sensors_adm1021_init) +module_exit(sensors_adm1021_exit) diff --git a/drivers/i2c/chips/adm1025.c b/drivers/i2c/chips/adm1025.c new file mode 100644 index 000000000000..e0771a3d05c9 --- /dev/null +++ b/drivers/i2c/chips/adm1025.c @@ -0,0 +1,574 @@ +/* + * adm1025.c + * + * Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com> + * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + * + * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6 + * voltages (including its own power source) and up to two temperatures + * (its own plus up to one external one). Voltages are scaled internally + * (which is not the common way) with ratios such that the nominal value + * of each voltage correspond to a register value of 192 (which means a + * resolution of about 0.5% of the nominal value). Temperature values are + * reported with a 1 deg resolution and a 3 deg accuracy. Complete + * datasheet can be obtained from Analog's website at: + * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html + * + * This driver also supports the ADM1025A, which differs from the ADM1025 + * only in that it has "open-drain VID inputs while the ADM1025 has + * on-chip 100k pull-ups on the VID inputs". It doesn't make any + * difference for us. + * + * This driver also supports the NE1619, a sensor chip made by Philips. + * That chip is similar to the ADM1025A, with a few differences. The only + * difference that matters to us is that the NE1619 has only two possible + * addresses while the ADM1025A has a third one. Complete datasheet can be + * obtained from Philips's website at: + * http://www.semiconductors.philips.com/pip/NE1619DS.html + * + * Since the ADM1025 was the first chipset supported by this driver, most + * comments will refer to this chipset, but are actually general and + * concern all supported chipsets, unless mentioned otherwise. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> + +/* + * Addresses to scan + * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e. + * NE1619 has two possible addresses: 0x2c and 0x2d. + */ + +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_2(adm1025, ne1619); + +/* + * The ADM1025 registers + */ + +#define ADM1025_REG_MAN_ID 0x3E +#define ADM1025_REG_CHIP_ID 0x3F +#define ADM1025_REG_CONFIG 0x40 +#define ADM1025_REG_STATUS1 0x41 +#define ADM1025_REG_STATUS2 0x42 +#define ADM1025_REG_IN(nr) (0x20 + (nr)) +#define ADM1025_REG_IN_MAX(nr) (0x2B + (nr) * 2) +#define ADM1025_REG_IN_MIN(nr) (0x2C + (nr) * 2) +#define ADM1025_REG_TEMP(nr) (0x26 + (nr)) +#define ADM1025_REG_TEMP_HIGH(nr) (0x37 + (nr) * 2) +#define ADM1025_REG_TEMP_LOW(nr) (0x38 + (nr) * 2) +#define ADM1025_REG_VID 0x47 +#define ADM1025_REG_VID4 0x49 + +/* + * Conversions and various macros + * The ADM1025 uses signed 8-bit values for temperatures. + */ + +static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 }; + +#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192) +#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \ + (val) * 192 >= (scale) * 255 ? 255 : \ + ((val) * 192 + (scale)/2) / (scale)) + +#define TEMP_FROM_REG(reg) ((reg) * 1000) +#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \ + (val) >= 126500 ? 127 : \ + (((val) < 0 ? (val)-500 : (val)+500) / 1000)) + +/* + * Functions declaration + */ + +static int adm1025_attach_adapter(struct i2c_adapter *adapter); +static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind); +static void adm1025_init_client(struct i2c_client *client); +static int adm1025_detach_client(struct i2c_client *client); +static struct adm1025_data *adm1025_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver adm1025_driver = { + .owner = THIS_MODULE, + .name = "adm1025", + .id = I2C_DRIVERID_ADM1025, + .flags = I2C_DF_NOTIFY, + .attach_adapter = adm1025_attach_adapter, + .detach_client = adm1025_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct adm1025_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + u8 in[6]; /* register value */ + u8 in_max[6]; /* register value */ + u8 in_min[6]; /* register value */ + s8 temp[2]; /* register value */ + s8 temp_min[2]; /* register value */ + s8 temp_max[2]; /* register value */ + u16 alarms; /* register values, combined */ + u8 vid; /* register values, combined */ + u8 vrm; +}; + +/* + * Sysfs stuff + */ + +#define show_in(offset) \ +static ssize_t show_in##offset(struct device *dev, char *buf) \ +{ \ + struct adm1025_data *data = adm1025_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ + in_scale[offset])); \ +} \ +static ssize_t show_in##offset##_min(struct device *dev, char *buf) \ +{ \ + struct adm1025_data *data = adm1025_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ + in_scale[offset])); \ +} \ +static ssize_t show_in##offset##_max(struct device *dev, char *buf) \ +{ \ + struct adm1025_data *data = adm1025_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ + in_scale[offset])); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); +show_in(0); +show_in(1); +show_in(2); +show_in(3); +show_in(4); +show_in(5); + +#define show_temp(offset) \ +static ssize_t show_temp##offset(struct device *dev, char *buf) \ +{ \ + struct adm1025_data *data = adm1025_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ +} \ +static ssize_t show_temp##offset##_min(struct device *dev, char *buf) \ +{ \ + struct adm1025_data *data = adm1025_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \ +} \ +static ssize_t show_temp##offset##_max(struct device *dev, char *buf) \ +{ \ + struct adm1025_data *data = adm1025_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \ +}\ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL); +show_temp(1); +show_temp(2); + +#define set_in(offset) \ +static ssize_t set_in##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct adm1025_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \ + i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \ + data->in_min[offset]); \ + up(&data->update_lock); \ + return count; \ +} \ +static ssize_t set_in##offset##_max(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct adm1025_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \ + i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \ + data->in_max[offset]); \ + up(&data->update_lock); \ + return count; \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ + show_in##offset##_max, set_in##offset##_max); +set_in(0); +set_in(1); +set_in(2); +set_in(3); +set_in(4); +set_in(5); + +#define set_temp(offset) \ +static ssize_t set_temp##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct adm1025_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->temp_min[offset-1] = TEMP_TO_REG(val); \ + i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \ + data->temp_min[offset-1]); \ + up(&data->update_lock); \ + return count; \ +} \ +static ssize_t set_temp##offset##_max(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct adm1025_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->temp_max[offset-1] = TEMP_TO_REG(val); \ + i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \ + data->temp_max[offset-1]); \ + up(&data->update_lock); \ + return count; \ +} \ +static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ + show_temp##offset##_min, set_temp##offset##_min); \ +static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ + show_temp##offset##_max, set_temp##offset##_max); +set_temp(1); +set_temp(2); + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct adm1025_data *data = adm1025_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +static ssize_t show_vid(struct device *dev, char *buf) +{ + struct adm1025_data *data = adm1025_update_device(dev); + return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL); + +static ssize_t show_vrm(struct device *dev, char *buf) +{ + struct adm1025_data *data = adm1025_update_device(dev); + return sprintf(buf, "%u\n", data->vrm); +} +static ssize_t set_vrm(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1025_data *data = i2c_get_clientdata(client); + data->vrm = simple_strtoul(buf, NULL, 10); + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); + +/* + * Real code + */ + +static int adm1025_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, adm1025_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct adm1025_data *data; + int err = 0; + const char *name = ""; + u8 config; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct adm1025_data)); + + /* The common I2C client data is placed right before the + ADM1025-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &adm1025_driver; + new_client->flags = 0; + + /* + * Now we do the remaining detection. A negative kind means that + * the driver was loaded with no force parameter (default), so we + * must both detect and identify the chip. A zero kind means that + * the driver was loaded with the force parameter, the detection + * step shall be skipped. A positive kind means that the driver + * was loaded with the force parameter and a given kind of chip is + * requested, so both the detection and the identification steps + * are skipped. + */ + config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG); + if (kind < 0) { /* detection */ + if ((config & 0x80) != 0x00 + || (i2c_smbus_read_byte_data(new_client, + ADM1025_REG_STATUS1) & 0xC0) != 0x00 + || (i2c_smbus_read_byte_data(new_client, + ADM1025_REG_STATUS2) & 0xBC) != 0x00) { + dev_dbg(&adapter->dev, + "ADM1025 detection failed at 0x%02x.\n", + address); + goto exit_free; + } + } + + if (kind <= 0) { /* identification */ + u8 man_id, chip_id; + + man_id = i2c_smbus_read_byte_data(new_client, + ADM1025_REG_MAN_ID); + chip_id = i2c_smbus_read_byte_data(new_client, + ADM1025_REG_CHIP_ID); + + if (man_id == 0x41) { /* Analog Devices */ + if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */ + kind = adm1025; + } + } else + if (man_id == 0xA1) { /* Philips */ + if (address != 0x2E + && (chip_id & 0xF0) == 0x20) { /* NE1619 */ + kind = ne1619; + } + } + + if (kind <= 0) { /* identification failed */ + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%02X, " + "chip_id=0x%02X).\n", man_id, chip_id); + goto exit_free; + } + } + + if (kind == adm1025) { + name = "adm1025"; + } else if (kind == ne1619) { + name = "ne1619"; + } + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the ADM1025 chip */ + adm1025_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in5_max); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_in1_ref); + device_create_file(&new_client->dev, &dev_attr_vrm); + + /* Pin 11 is either in4 (+12V) or VID4 */ + if (!(config & 0x20)) { + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in4_max); + } + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static void adm1025_init_client(struct i2c_client *client) +{ + u8 reg; + struct adm1025_data *data = i2c_get_clientdata(client); + int i; + + data->vrm = i2c_which_vrm(); + + /* + * Set high limits + * Usually we avoid setting limits on driver init, but it happens + * that the ADM1025 comes with stupid default limits (all registers + * set to 0). In case the chip has not gone through any limit + * setting yet, we better set the high limits to the max so that + * no alarm triggers. + */ + for (i=0; i<6; i++) { + reg = i2c_smbus_read_byte_data(client, + ADM1025_REG_IN_MAX(i)); + if (reg == 0) + i2c_smbus_write_byte_data(client, + ADM1025_REG_IN_MAX(i), + 0xFF); + } + for (i=0; i<2; i++) { + reg = i2c_smbus_read_byte_data(client, + ADM1025_REG_TEMP_HIGH(i)); + if (reg == 0) + i2c_smbus_write_byte_data(client, + ADM1025_REG_TEMP_HIGH(i), + 0x7F); + } + + /* + * Start the conversions + */ + reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG); + if (!(reg & 0x01)) + i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG, + (reg&0x7E)|0x01); +} + +static int adm1025_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct adm1025_data *adm1025_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1025_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { + int i; + + dev_dbg(&client->dev, "Updating data.\n"); + for (i=0; i<6; i++) { + data->in[i] = i2c_smbus_read_byte_data(client, + ADM1025_REG_IN(i)); + data->in_min[i] = i2c_smbus_read_byte_data(client, + ADM1025_REG_IN_MIN(i)); + data->in_max[i] = i2c_smbus_read_byte_data(client, + ADM1025_REG_IN_MAX(i)); + } + for (i=0; i<2; i++) { + data->temp[i] = i2c_smbus_read_byte_data(client, + ADM1025_REG_TEMP(i)); + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADM1025_REG_TEMP_LOW(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADM1025_REG_TEMP_HIGH(i)); + } + data->alarms = i2c_smbus_read_byte_data(client, + ADM1025_REG_STATUS1) + | (i2c_smbus_read_byte_data(client, + ADM1025_REG_STATUS2) << 8); + data->vid = (i2c_smbus_read_byte_data(client, + ADM1025_REG_VID) & 0x0f) + | ((i2c_smbus_read_byte_data(client, + ADM1025_REG_VID4) & 0x01) << 4); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_adm1025_init(void) +{ + return i2c_add_driver(&adm1025_driver); +} + +static void __exit sensors_adm1025_exit(void) +{ + i2c_del_driver(&adm1025_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("ADM1025 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_adm1025_init); +module_exit(sensors_adm1025_exit); diff --git a/drivers/i2c/chips/adm1026.c b/drivers/i2c/chips/adm1026.c new file mode 100644 index 000000000000..39e2f4a900bf --- /dev/null +++ b/drivers/i2c/chips/adm1026.c @@ -0,0 +1,1754 @@ +/* + adm1026.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> + Copyright (C) 2004 Justin Thiessen <jthiessen@penguincomputing.com> + + Chip details at: + + <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(adm1026); + +static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int gpio_output[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int gpio_inverted[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int gpio_normal[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; +static int gpio_fan[8] = { -1, -1, -1, -1, -1, -1, -1, -1 }; +module_param_array(gpio_input,int,NULL,0); +MODULE_PARM_DESC(gpio_input,"List of GPIO pins (0-16) to program as inputs"); +module_param_array(gpio_output,int,NULL,0); +MODULE_PARM_DESC(gpio_output,"List of GPIO pins (0-16) to program as " + "outputs"); +module_param_array(gpio_inverted,int,NULL,0); +MODULE_PARM_DESC(gpio_inverted,"List of GPIO pins (0-16) to program as " + "inverted"); +module_param_array(gpio_normal,int,NULL,0); +MODULE_PARM_DESC(gpio_normal,"List of GPIO pins (0-16) to program as " + "normal/non-inverted"); +module_param_array(gpio_fan,int,NULL,0); +MODULE_PARM_DESC(gpio_fan,"List of GPIO pins (0-7) to program as fan tachs"); + +/* Many ADM1026 constants specified below */ + +/* The ADM1026 registers */ +#define ADM1026_REG_CONFIG1 0x00 +#define CFG1_MONITOR 0x01 +#define CFG1_INT_ENABLE 0x02 +#define CFG1_INT_CLEAR 0x04 +#define CFG1_AIN8_9 0x08 +#define CFG1_THERM_HOT 0x10 +#define CFG1_DAC_AFC 0x20 +#define CFG1_PWM_AFC 0x40 +#define CFG1_RESET 0x80 +#define ADM1026_REG_CONFIG2 0x01 +/* CONFIG2 controls FAN0/GPIO0 through FAN7/GPIO7 */ +#define ADM1026_REG_CONFIG3 0x07 +#define CFG3_GPIO16_ENABLE 0x01 +#define CFG3_CI_CLEAR 0x02 +#define CFG3_VREF_250 0x04 +#define CFG3_GPIO16_DIR 0x40 +#define CFG3_GPIO16_POL 0x80 +#define ADM1026_REG_E2CONFIG 0x13 +#define E2CFG_READ 0x01 +#define E2CFG_WRITE 0x02 +#define E2CFG_ERASE 0x04 +#define E2CFG_ROM 0x08 +#define E2CFG_CLK_EXT 0x80 + +/* There are 10 general analog inputs and 7 dedicated inputs + * They are: + * 0 - 9 = AIN0 - AIN9 + * 10 = Vbat + * 11 = 3.3V Standby + * 12 = 3.3V Main + * 13 = +5V + * 14 = Vccp (CPU core voltage) + * 15 = +12V + * 16 = -12V + */ +static u16 ADM1026_REG_IN[] = { + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, + 0x36, 0x37, 0x27, 0x29, 0x26, 0x2a, + 0x2b, 0x2c, 0x2d, 0x2e, 0x2f + }; +static u16 ADM1026_REG_IN_MIN[] = { + 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, + 0x5e, 0x5f, 0x6d, 0x49, 0x6b, 0x4a, + 0x4b, 0x4c, 0x4d, 0x4e, 0x4f + }; +static u16 ADM1026_REG_IN_MAX[] = { + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, + 0x56, 0x57, 0x6c, 0x41, 0x6a, 0x42, + 0x43, 0x44, 0x45, 0x46, 0x47 + }; + +/* Temperatures are: + * 0 - Internal + * 1 - External 1 + * 2 - External 2 + */ +static u16 ADM1026_REG_TEMP[] = { 0x1f, 0x28, 0x29 }; +static u16 ADM1026_REG_TEMP_MIN[] = { 0x69, 0x48, 0x49 }; +static u16 ADM1026_REG_TEMP_MAX[] = { 0x68, 0x40, 0x41 }; +static u16 ADM1026_REG_TEMP_TMIN[] = { 0x10, 0x11, 0x12 }; +static u16 ADM1026_REG_TEMP_THERM[] = { 0x0d, 0x0e, 0x0f }; +static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f }; + +#define ADM1026_REG_FAN(nr) (0x38 + (nr)) +#define ADM1026_REG_FAN_MIN(nr) (0x60 + (nr)) +#define ADM1026_REG_FAN_DIV_0_3 0x02 +#define ADM1026_REG_FAN_DIV_4_7 0x03 + +#define ADM1026_REG_DAC 0x04 +#define ADM1026_REG_PWM 0x05 + +#define ADM1026_REG_GPIO_CFG_0_3 0x08 +#define ADM1026_REG_GPIO_CFG_4_7 0x09 +#define ADM1026_REG_GPIO_CFG_8_11 0x0a +#define ADM1026_REG_GPIO_CFG_12_15 0x0b +/* CFG_16 in REG_CFG3 */ +#define ADM1026_REG_GPIO_STATUS_0_7 0x24 +#define ADM1026_REG_GPIO_STATUS_8_15 0x25 +/* STATUS_16 in REG_STATUS4 */ +#define ADM1026_REG_GPIO_MASK_0_7 0x1c +#define ADM1026_REG_GPIO_MASK_8_15 0x1d +/* MASK_16 in REG_MASK4 */ + +#define ADM1026_REG_COMPANY 0x16 +#define ADM1026_REG_VERSTEP 0x17 +/* These are the recognized values for the above regs */ +#define ADM1026_COMPANY_ANALOG_DEV 0x41 +#define ADM1026_VERSTEP_GENERIC 0x40 +#define ADM1026_VERSTEP_ADM1026 0x44 + +#define ADM1026_REG_MASK1 0x18 +#define ADM1026_REG_MASK2 0x19 +#define ADM1026_REG_MASK3 0x1a +#define ADM1026_REG_MASK4 0x1b + +#define ADM1026_REG_STATUS1 0x20 +#define ADM1026_REG_STATUS2 0x21 +#define ADM1026_REG_STATUS3 0x22 +#define ADM1026_REG_STATUS4 0x23 + +#define ADM1026_FAN_ACTIVATION_TEMP_HYST -6 +#define ADM1026_FAN_CONTROL_TEMP_RANGE 20 +#define ADM1026_PWM_MAX 255 + +/* Conversions. Rounding and limit checking is only done on the TO_REG + * variants. Note that you should be a bit careful with which arguments + * these macros are called: arguments may be evaluated more than once. + */ + +/* IN are scaled acording to built-in resistors. These are the + * voltages corresponding to 3/4 of full scale (192 or 0xc0) + * NOTE: The -12V input needs an additional factor to account + * for the Vref pullup resistor. + * NEG12_OFFSET = SCALE * Vref / V-192 - Vref + * = 13875 * 2.50 / 1.875 - 2500 + * = 16000 + * + * The values in this table are based on Table II, page 15 of the + * datasheet. + */ +static int adm1026_scaling[] = { /* .001 Volts */ + 2250, 2250, 2250, 2250, 2250, 2250, + 1875, 1875, 1875, 1875, 3000, 3330, + 3330, 4995, 2250, 12000, 13875 + }; +#define NEG12_OFFSET 16000 +#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) +#define INS_TO_REG(n,val) (SENSORS_LIMIT(SCALE(val,adm1026_scaling[n],192),\ + 0,255)) +#define INS_FROM_REG(n,val) (SCALE(val,192,adm1026_scaling[n])) + +/* FAN speed is measured using 22.5kHz clock and counts for 2 pulses + * and we assume a 2 pulse-per-rev fan tach signal + * 22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000 + */ +#define FAN_TO_REG(val,div) ((val)<=0 ? 0xff : SENSORS_LIMIT(1350000/((val)*\ + (div)),1,254)) +#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==0xff ? 0 : 1350000/((val)*\ + (div))) +#define DIV_FROM_REG(val) (1<<(val)) +#define DIV_TO_REG(val) ((val)>=8 ? 3 : (val)>=4 ? 2 : (val)>=2 ? 1 : 0) + +/* Temperature is reported in 1 degC increments */ +#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\ + -127,127)) +#define TEMP_FROM_REG(val) ((val) * 1000) +#define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\ + -127,127)) +#define OFFSET_FROM_REG(val) ((val) * 1000) + +#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) +#define PWM_FROM_REG(val) (val) + +#define PWM_MIN_TO_REG(val) ((val) & 0xf0) +#define PWM_MIN_FROM_REG(val) (((val) & 0xf0) + ((val) >> 4)) + +/* Analog output is a voltage, and scaled to millivolts. The datasheet + * indicates that the DAC could be used to drive the fans, but in our + * example board (Arima HDAMA) it isn't connected to the fans at all. + */ +#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500),0,255)) +#define DAC_FROM_REG(val) (((val)*2500)/255) + +/* Typically used with systems using a v9.1 VRM spec ? */ +#define ADM1026_INIT_VRM 91 + +/* Chip sampling rates + * + * Some sensors are not updated more frequently than once per second + * so it doesn't make sense to read them more often than that. + * We cache the results and return the saved data if the driver + * is called again before a second has elapsed. + * + * Also, there is significant configuration data for this chip + * So, we keep the config data up to date in the cache + * when it is written and only sample it once every 5 *minutes* + */ +#define ADM1026_DATA_INTERVAL (1 * HZ) +#define ADM1026_CONFIG_INTERVAL (5 * 60 * HZ) + +/* We allow for multiple chips in a single system. + * + * For each registered ADM1026, we need to keep state information + * at client->data. The adm1026_data structure is dynamically + * allocated, when a new client structure is allocated. */ + +struct pwm_data { + u8 pwm; + u8 enable; + u8 auto_pwm_min; +}; + +struct adm1026_data { + struct i2c_client client; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + int valid; /* !=0 if following fields are valid */ + unsigned long last_reading; /* In jiffies */ + unsigned long last_config; /* In jiffies */ + + u8 in[17]; /* Register value */ + u8 in_max[17]; /* Register value */ + u8 in_min[17]; /* Register value */ + s8 temp[3]; /* Register value */ + s8 temp_min[3]; /* Register value */ + s8 temp_max[3]; /* Register value */ + s8 temp_tmin[3]; /* Register value */ + s8 temp_crit[3]; /* Register value */ + s8 temp_offset[3]; /* Register value */ + u8 fan[8]; /* Register value */ + u8 fan_min[8]; /* Register value */ + u8 fan_div[8]; /* Decoded value */ + struct pwm_data pwm1; /* Pwm control values */ + int vid; /* Decoded value */ + u8 vrm; /* VRM version */ + u8 analog_out; /* Register value (DAC) */ + long alarms; /* Register encoding, combined */ + long alarm_mask; /* Register encoding, combined */ + long gpio; /* Register encoding, combined */ + long gpio_mask; /* Register encoding, combined */ + u8 gpio_config[17]; /* Decoded value */ + u8 config1; /* Register value */ + u8 config2; /* Register value */ + u8 config3; /* Register value */ +}; + +static int adm1026_attach_adapter(struct i2c_adapter *adapter); +static int adm1026_detect(struct i2c_adapter *adapter, int address, + int kind); +static int adm1026_detach_client(struct i2c_client *client); +static int adm1026_read_value(struct i2c_client *client, u8 register); +static int adm1026_write_value(struct i2c_client *client, u8 register, + int value); +static void adm1026_print_gpio(struct i2c_client *client); +static void adm1026_fixup_gpio(struct i2c_client *client); +static struct adm1026_data *adm1026_update_device(struct device *dev); +static void adm1026_init_client(struct i2c_client *client); + + +static struct i2c_driver adm1026_driver = { + .owner = THIS_MODULE, + .name = "adm1026", + .flags = I2C_DF_NOTIFY, + .attach_adapter = adm1026_attach_adapter, + .detach_client = adm1026_detach_client, +}; + +int adm1026_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) { + return 0; + } + return i2c_detect(adapter, &addr_data, adm1026_detect); +} + +int adm1026_detach_client(struct i2c_client *client) +{ + i2c_detach_client(client); + kfree(client); + return 0; +} + +int adm1026_read_value(struct i2c_client *client, u8 reg) +{ + int res; + + if (reg < 0x80) { + /* "RAM" locations */ + res = i2c_smbus_read_byte_data(client, reg) & 0xff; + } else { + /* EEPROM, do nothing */ + res = 0; + } + return res; +} + +int adm1026_write_value(struct i2c_client *client, u8 reg, int value) +{ + int res; + + if (reg < 0x80) { + /* "RAM" locations */ + res = i2c_smbus_write_byte_data(client, reg, value); + } else { + /* EEPROM, do nothing */ + res = 0; + } + return res; +} + +void adm1026_init_client(struct i2c_client *client) +{ + int value, i; + struct adm1026_data *data = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "Initializing device\n"); + /* Read chip config */ + data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1); + data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2); + data->config3 = adm1026_read_value(client, ADM1026_REG_CONFIG3); + + /* Inform user of chip config */ + dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n", + data->config1); + if ((data->config1 & CFG1_MONITOR) == 0) { + dev_dbg(&client->dev, "Monitoring not currently " + "enabled.\n"); + } + if (data->config1 & CFG1_INT_ENABLE) { + dev_dbg(&client->dev, "SMBALERT interrupts are " + "enabled.\n"); + } + if (data->config1 & CFG1_AIN8_9) { + dev_dbg(&client->dev, "in8 and in9 enabled. " + "temp3 disabled.\n"); + } else { + dev_dbg(&client->dev, "temp3 enabled. in8 and " + "in9 disabled.\n"); + } + if (data->config1 & CFG1_THERM_HOT) { + dev_dbg(&client->dev, "Automatic THERM, PWM, " + "and temp limits enabled.\n"); + } + + value = data->config3; + if (data->config3 & CFG3_GPIO16_ENABLE) { + dev_dbg(&client->dev, "GPIO16 enabled. THERM" + "pin disabled.\n"); + } else { + dev_dbg(&client->dev, "THERM pin enabled. " + "GPIO16 disabled.\n"); + } + if (data->config3 & CFG3_VREF_250) { + dev_dbg(&client->dev, "Vref is 2.50 Volts.\n"); + } else { + dev_dbg(&client->dev, "Vref is 1.82 Volts.\n"); + } + /* Read and pick apart the existing GPIO configuration */ + value = 0; + for (i = 0;i <= 15;++i) { + if ((i & 0x03) == 0) { + value = adm1026_read_value(client, + ADM1026_REG_GPIO_CFG_0_3 + i/4); + } + data->gpio_config[i] = value & 0x03; + value >>= 2; + } + data->gpio_config[16] = (data->config3 >> 6) & 0x03; + + /* ... and then print it */ + adm1026_print_gpio(client); + + /* If the user asks us to reprogram the GPIO config, then + * do it now. + */ + if (gpio_input[0] != -1 || gpio_output[0] != -1 + || gpio_inverted[0] != -1 || gpio_normal[0] != -1 + || gpio_fan[0] != -1) { + adm1026_fixup_gpio(client); + } + + /* WE INTENTIONALLY make no changes to the limits, + * offsets, pwms, fans and zones. If they were + * configured, we don't want to mess with them. + * If they weren't, the default is 100% PWM, no + * control and will suffice until 'sensors -s' + * can be run by the user. We DO set the default + * value for pwm1.auto_pwm_min to its maximum + * so that enabling automatic pwm fan control + * without first setting a value for pwm1.auto_pwm_min + * will not result in potentially dangerous fan speed decrease. + */ + data->pwm1.auto_pwm_min=255; + /* Start monitoring */ + value = adm1026_read_value(client, ADM1026_REG_CONFIG1); + /* Set MONITOR, clear interrupt acknowledge and s/w reset */ + value = (value | CFG1_MONITOR) & (~CFG1_INT_CLEAR & ~CFG1_RESET); + dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); + data->config1 = value; + adm1026_write_value(client, ADM1026_REG_CONFIG1, value); + + /* initialize fan_div[] to hardware defaults */ + value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) | + (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) << 8); + for (i = 0;i <= 7;++i) { + data->fan_div[i] = DIV_FROM_REG(value & 0x03); + value >>= 2; + } +} + +void adm1026_print_gpio(struct i2c_client *client) +{ + struct adm1026_data *data = i2c_get_clientdata(client); + int i; + + dev_dbg(&client->dev, "GPIO config is:"); + for (i = 0;i <= 7;++i) { + if (data->config2 & (1 << i)) { + dev_dbg(&client->dev, "\t%sGP%s%d\n", + data->gpio_config[i] & 0x02 ? "" : "!", + data->gpio_config[i] & 0x01 ? "OUT" : "IN", + i); + } else { + dev_dbg(&client->dev, "\tFAN%d\n", i); + } + } + for (i = 8;i <= 15;++i) { + dev_dbg(&client->dev, "\t%sGP%s%d\n", + data->gpio_config[i] & 0x02 ? "" : "!", + data->gpio_config[i] & 0x01 ? "OUT" : "IN", + i); + } + if (data->config3 & CFG3_GPIO16_ENABLE) { + dev_dbg(&client->dev, "\t%sGP%s16\n", + data->gpio_config[16] & 0x02 ? "" : "!", + data->gpio_config[16] & 0x01 ? "OUT" : "IN"); + } else { + /* GPIO16 is THERM */ + dev_dbg(&client->dev, "\tTHERM\n"); + } +} + +void adm1026_fixup_gpio(struct i2c_client *client) +{ + struct adm1026_data *data = i2c_get_clientdata(client); + int i; + int value; + + /* Make the changes requested. */ + /* We may need to unlock/stop monitoring or soft-reset the + * chip before we can make changes. This hasn't been + * tested much. FIXME + */ + + /* Make outputs */ + for (i = 0;i <= 16;++i) { + if (gpio_output[i] >= 0 && gpio_output[i] <= 16) { + data->gpio_config[gpio_output[i]] |= 0x01; + } + /* if GPIO0-7 is output, it isn't a FAN tach */ + if (gpio_output[i] >= 0 && gpio_output[i] <= 7) { + data->config2 |= 1 << gpio_output[i]; + } + } + + /* Input overrides output */ + for (i = 0;i <= 16;++i) { + if (gpio_input[i] >= 0 && gpio_input[i] <= 16) { + data->gpio_config[gpio_input[i]] &= ~ 0x01; + } + /* if GPIO0-7 is input, it isn't a FAN tach */ + if (gpio_input[i] >= 0 && gpio_input[i] <= 7) { + data->config2 |= 1 << gpio_input[i]; + } + } + + /* Inverted */ + for (i = 0;i <= 16;++i) { + if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) { + data->gpio_config[gpio_inverted[i]] &= ~ 0x02; + } + } + + /* Normal overrides inverted */ + for (i = 0;i <= 16;++i) { + if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) { + data->gpio_config[gpio_normal[i]] |= 0x02; + } + } + + /* Fan overrides input and output */ + for (i = 0;i <= 7;++i) { + if (gpio_fan[i] >= 0 && gpio_fan[i] <= 7) { + data->config2 &= ~(1 << gpio_fan[i]); + } + } + + /* Write new configs to registers */ + adm1026_write_value(client, ADM1026_REG_CONFIG2, data->config2); + data->config3 = (data->config3 & 0x3f) + | ((data->gpio_config[16] & 0x03) << 6); + adm1026_write_value(client, ADM1026_REG_CONFIG3, data->config3); + for (i = 15, value = 0;i >= 0;--i) { + value <<= 2; + value |= data->gpio_config[i] & 0x03; + if ((i & 0x03) == 0) { + adm1026_write_value(client, + ADM1026_REG_GPIO_CFG_0_3 + i/4, + value); + value = 0; + } + } + + /* Print the new config */ + adm1026_print_gpio(client); +} + + +static struct adm1026_data *adm1026_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int i; + long value, alarms, gpio; + + down(&data->update_lock); + if (!data->valid + || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) { + /* Things that change quickly */ + dev_dbg(&client->dev,"Reading sensor values\n"); + for (i = 0;i <= 16;++i) { + data->in[i] = + adm1026_read_value(client, ADM1026_REG_IN[i]); + } + + for (i = 0;i <= 7;++i) { + data->fan[i] = + adm1026_read_value(client, ADM1026_REG_FAN(i)); + } + + for (i = 0;i <= 2;++i) { + /* NOTE: temp[] is s8 and we assume 2's complement + * "conversion" in the assignment */ + data->temp[i] = + adm1026_read_value(client, ADM1026_REG_TEMP[i]); + } + + data->pwm1.pwm = adm1026_read_value(client, + ADM1026_REG_PWM); + data->analog_out = adm1026_read_value(client, + ADM1026_REG_DAC); + /* GPIO16 is MSbit of alarms, move it to gpio */ + alarms = adm1026_read_value(client, ADM1026_REG_STATUS4); + gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */ + alarms &= 0x7f; + alarms <<= 8; + alarms |= adm1026_read_value(client, ADM1026_REG_STATUS3); + alarms <<= 8; + alarms |= adm1026_read_value(client, ADM1026_REG_STATUS2); + alarms <<= 8; + alarms |= adm1026_read_value(client, ADM1026_REG_STATUS1); + data->alarms = alarms; + + /* Read the GPIO values */ + gpio |= adm1026_read_value(client, + ADM1026_REG_GPIO_STATUS_8_15); + gpio <<= 8; + gpio |= adm1026_read_value(client, + ADM1026_REG_GPIO_STATUS_0_7); + data->gpio = gpio; + + data->last_reading = jiffies; + }; /* last_reading */ + + if (!data->valid || + time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) { + /* Things that don't change often */ + dev_dbg(&client->dev, "Reading config values\n"); + for (i = 0;i <= 16;++i) { + data->in_min[i] = adm1026_read_value(client, + ADM1026_REG_IN_MIN[i]); + data->in_max[i] = adm1026_read_value(client, + ADM1026_REG_IN_MAX[i]); + } + + value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) + | (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) + << 8); + for (i = 0;i <= 7;++i) { + data->fan_min[i] = adm1026_read_value(client, + ADM1026_REG_FAN_MIN(i)); + data->fan_div[i] = DIV_FROM_REG(value & 0x03); + value >>= 2; + } + + for (i = 0; i <= 2; ++i) { + /* NOTE: temp_xxx[] are s8 and we assume 2's + * complement "conversion" in the assignment + */ + data->temp_min[i] = adm1026_read_value(client, + ADM1026_REG_TEMP_MIN[i]); + data->temp_max[i] = adm1026_read_value(client, + ADM1026_REG_TEMP_MAX[i]); + data->temp_tmin[i] = adm1026_read_value(client, + ADM1026_REG_TEMP_TMIN[i]); + data->temp_crit[i] = adm1026_read_value(client, + ADM1026_REG_TEMP_THERM[i]); + data->temp_offset[i] = adm1026_read_value(client, + ADM1026_REG_TEMP_OFFSET[i]); + } + + /* Read the STATUS/alarm masks */ + alarms = adm1026_read_value(client, ADM1026_REG_MASK4); + gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */ + alarms = (alarms & 0x7f) << 8; + alarms |= adm1026_read_value(client, ADM1026_REG_MASK3); + alarms <<= 8; + alarms |= adm1026_read_value(client, ADM1026_REG_MASK2); + alarms <<= 8; + alarms |= adm1026_read_value(client, ADM1026_REG_MASK1); + data->alarm_mask = alarms; + + /* Read the GPIO values */ + gpio |= adm1026_read_value(client, + ADM1026_REG_GPIO_MASK_8_15); + gpio <<= 8; + gpio |= adm1026_read_value(client, ADM1026_REG_GPIO_MASK_0_7); + data->gpio_mask = gpio; + + /* Read various values from CONFIG1 */ + data->config1 = adm1026_read_value(client, + ADM1026_REG_CONFIG1); + if (data->config1 & CFG1_PWM_AFC) { + data->pwm1.enable = 2; + data->pwm1.auto_pwm_min = + PWM_MIN_FROM_REG(data->pwm1.pwm); + } + /* Read the GPIO config */ + data->config2 = adm1026_read_value(client, + ADM1026_REG_CONFIG2); + data->config3 = adm1026_read_value(client, + ADM1026_REG_CONFIG3); + data->gpio_config[16] = (data->config3 >> 6) & 0x03; + + value = 0; + for (i = 0;i <= 15;++i) { + if ((i & 0x03) == 0) { + value = adm1026_read_value(client, + ADM1026_REG_GPIO_CFG_0_3 + i/4); + } + data->gpio_config[i] = value & 0x03; + value >>= 2; + } + + data->last_config = jiffies; + }; /* last_config */ + + dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n"); + data->vid = (data->gpio >> 11) & 0x1f; + data->valid = 1; + up(&data->update_lock); + return data; +} + +static ssize_t show_in(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr])); +} +static ssize_t show_in_min(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr])); +} +static ssize_t set_in_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = INS_TO_REG(nr, val); + adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t show_in_max(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr])); +} +static ssize_t set_in_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = INS_TO_REG(nr, val); + adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]); + up(&data->update_lock); + return count; +} + +#define in_reg(offset) \ +static ssize_t show_in##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static ssize_t show_in##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t set_in##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t show_in##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t set_in##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); + + +in_reg(0); +in_reg(1); +in_reg(2); +in_reg(3); +in_reg(4); +in_reg(5); +in_reg(6); +in_reg(7); +in_reg(8); +in_reg(9); +in_reg(10); +in_reg(11); +in_reg(12); +in_reg(13); +in_reg(14); +in_reg(15); + +static ssize_t show_in16(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in[16]) - + NEG12_OFFSET); +} +static ssize_t show_in16_min(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_min[16]) + - NEG12_OFFSET); +} +static ssize_t set_in16_min(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET); + adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]); + up(&data->update_lock); + return count; +} +static ssize_t show_in16_max(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_max[16]) + - NEG12_OFFSET); +} +static ssize_t set_in16_max(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET); + adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(in16_input, S_IRUGO, show_in16, NULL); +static DEVICE_ATTR(in16_min, S_IRUGO | S_IWUSR, show_in16_min, set_in16_min); +static DEVICE_ATTR(in16_max, S_IRUGO | S_IWUSR, show_in16_max, set_in16_max); + + + + +/* Now add fan read/write functions */ + +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], + data->fan_div[nr])); +} +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], + data->fan_div[nr])); +} +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]); + adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr), + data->fan_min[nr]); + up(&data->update_lock); + return count; +} + +#define fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); + +fan_offset(1); +fan_offset(2); +fan_offset(3); +fan_offset(4); +fan_offset(5); +fan_offset(6); +fan_offset(7); +fan_offset(8); + +/* Adjust fan_min to account for new fan divisor */ +static void fixup_fan_min(struct device *dev, int fan, int old_div) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int new_min; + int new_div = data->fan_div[fan]; + + /* 0 and 0xff are special. Don't adjust them */ + if (data->fan_min[fan] == 0 || data->fan_min[fan] == 0xff) { + return; + } + + new_min = data->fan_min[fan] * old_div / new_div; + new_min = SENSORS_LIMIT(new_min, 1, 254); + data->fan_min[fan] = new_min; + adm1026_write_value(client, ADM1026_REG_FAN_MIN(fan), new_min); +} + +/* Now add fan_div read/write functions */ +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", data->fan_div[nr]); +} +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val,orig_div,new_div,shift; + + val = simple_strtol(buf, NULL, 10); + new_div = DIV_TO_REG(val); + if (new_div == 0) { + return -EINVAL; + } + down(&data->update_lock); + orig_div = data->fan_div[nr]; + data->fan_div[nr] = DIV_FROM_REG(new_div); + + if (nr < 4) { /* 0 <= nr < 4 */ + shift = 2 * nr; + adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3, + ((DIV_TO_REG(orig_div) & (~(0x03 << shift))) | + (new_div << shift))); + } else { /* 3 < nr < 8 */ + shift = 2 * (nr - 4); + adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7, + ((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) | + (new_div << shift))); + } + + if (data->fan_div[nr] != orig_div) { + fixup_fan_min(dev,nr,orig_div); + } + up(&data->update_lock); + return count; +} + +#define fan_offset_div(offset) \ +static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_div (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_div, set_fan_##offset##_div); + +fan_offset_div(1); +fan_offset_div(2); +fan_offset_div(3); +fan_offset_div(4); +fan_offset_div(5); +fan_offset_div(6); +fan_offset_div(7); +fan_offset_div(8); + +/* Temps */ +static ssize_t show_temp(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr])); +} +static ssize_t show_temp_min(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr])); +} +static ssize_t set_temp_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_min[nr] = TEMP_TO_REG(val); + adm1026_write_value(client, ADM1026_REG_TEMP_MIN[nr], + data->temp_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t show_temp_max(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr])); +} +static ssize_t set_temp_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max[nr] = TEMP_TO_REG(val); + adm1026_write_value(client, ADM1026_REG_TEMP_MAX[nr], + data->temp_max[nr]); + up(&data->update_lock); + return count; +} +#define temp_reg(offset) \ +static ssize_t show_temp_##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_temp_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp_##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_temp_max(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_max(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL); \ +static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_min, set_temp_##offset##_min); \ +static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_max, set_temp_##offset##_max); + + +temp_reg(1); +temp_reg(2); +temp_reg(3); + +static ssize_t show_temp_offset(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_offset[nr])); +} +static ssize_t set_temp_offset(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_offset[nr] = TEMP_TO_REG(val); + adm1026_write_value(client, ADM1026_REG_TEMP_OFFSET[nr], + data->temp_offset[nr]); + up(&data->update_lock); + return count; +} + +#define temp_offset_reg(offset) \ +static ssize_t show_temp_##offset##_offset (struct device *dev, char *buf) \ +{ \ + return show_temp_offset(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_offset(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_offset, set_temp_##offset##_offset); + +temp_offset_reg(1); +temp_offset_reg(2); +temp_offset_reg(3); + +static ssize_t show_temp_auto_point1_temp_hyst(struct device *dev, char *buf, + int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG( + ADM1026_FAN_ACTIVATION_TEMP_HYST + data->temp_tmin[nr])); +} +static ssize_t show_temp_auto_point2_temp(struct device *dev, char *buf, + int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr] + + ADM1026_FAN_CONTROL_TEMP_RANGE)); +} +static ssize_t show_temp_auto_point1_temp(struct device *dev, char *buf, + int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr])); +} +static ssize_t set_temp_auto_point1_temp(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_tmin[nr] = TEMP_TO_REG(val); + adm1026_write_value(client, ADM1026_REG_TEMP_TMIN[nr], + data->temp_tmin[nr]); + up(&data->update_lock); + return count; +} + +#define temp_auto_point(offset) \ +static ssize_t show_temp##offset##_auto_point1_temp (struct device *dev, \ + char *buf) \ +{ \ + return show_temp_auto_point1_temp(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp##offset##_auto_point1_temp (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_auto_point1_temp(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_temp##offset##_auto_point1_temp_hyst (struct device \ + *dev, char *buf) \ +{ \ + return show_temp_auto_point1_temp_hyst(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp##offset##_auto_point2_temp (struct device *dev, \ + char *buf) \ +{ \ + return show_temp_auto_point2_temp(dev, buf, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_auto_point1_temp, S_IRUGO | S_IWUSR, \ + show_temp##offset##_auto_point1_temp, \ + set_temp##offset##_auto_point1_temp); \ +static DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO, \ + show_temp##offset##_auto_point1_temp_hyst, NULL); \ +static DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO, \ + show_temp##offset##_auto_point2_temp, NULL); + +temp_auto_point(1); +temp_auto_point(2); +temp_auto_point(3); + +static ssize_t show_temp_crit_enable(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", (data->config1 & CFG1_THERM_HOT) >> 4); +} +static ssize_t set_temp_crit_enable(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + if ((val == 1) || (val==0)) { + down(&data->update_lock); + data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4); + adm1026_write_value(client, ADM1026_REG_CONFIG1, + data->config1); + up(&data->update_lock); + } + return count; +} + +static DEVICE_ATTR(temp1_crit_enable, S_IRUGO | S_IWUSR, + show_temp_crit_enable, set_temp_crit_enable); + +static DEVICE_ATTR(temp2_crit_enable, S_IRUGO | S_IWUSR, + show_temp_crit_enable, set_temp_crit_enable); + +static DEVICE_ATTR(temp3_crit_enable, S_IRUGO | S_IWUSR, + show_temp_crit_enable, set_temp_crit_enable); + + +static ssize_t show_temp_crit(struct device *dev, char *buf, int nr) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_crit[nr])); +} +static ssize_t set_temp_crit(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_crit[nr] = TEMP_TO_REG(val); + adm1026_write_value(client, ADM1026_REG_TEMP_THERM[nr], + data->temp_crit[nr]); + up(&data->update_lock); + return count; +} + +#define temp_crit_reg(offset) \ +static ssize_t show_temp_##offset##_crit (struct device *dev, char *buf) \ +{ \ + return show_temp_crit(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_crit (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_crit(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_crit, set_temp_##offset##_crit); + +temp_crit_reg(1); +temp_crit_reg(2); +temp_crit_reg(3); + +static ssize_t show_analog_out_reg(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", DAC_FROM_REG(data->analog_out)); +} +static ssize_t set_analog_out_reg(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->analog_out = DAC_TO_REG(val); + adm1026_write_value(client, ADM1026_REG_DAC, data->analog_out); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg, + set_analog_out_reg); + +static ssize_t show_vid_reg(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm)); +} + +static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL); + +static ssize_t show_vrm_reg(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", data->vrm); +} +static ssize_t store_vrm_reg(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + + data->vrm = simple_strtol(buf, NULL, 10); + return count; +} + +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); + +static ssize_t show_alarms_reg(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf, "%ld\n", (long) (data->alarms)); +} + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); + +static ssize_t show_alarm_mask(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%ld\n", data->alarm_mask); +} +static ssize_t set_alarm_mask(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + unsigned long mask; + + down(&data->update_lock); + data->alarm_mask = val & 0x7fffffff; + mask = data->alarm_mask + | (data->gpio_mask & 0x10000 ? 0x80000000 : 0); + adm1026_write_value(client, ADM1026_REG_MASK1, + mask & 0xff); + mask >>= 8; + adm1026_write_value(client, ADM1026_REG_MASK2, + mask & 0xff); + mask >>= 8; + adm1026_write_value(client, ADM1026_REG_MASK3, + mask & 0xff); + mask >>= 8; + adm1026_write_value(client, ADM1026_REG_MASK4, + mask & 0xff); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(alarm_mask, S_IRUGO | S_IWUSR, show_alarm_mask, + set_alarm_mask); + + +static ssize_t show_gpio(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%ld\n", data->gpio); +} +static ssize_t set_gpio(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + long gpio; + + down(&data->update_lock); + data->gpio = val & 0x1ffff; + gpio = data->gpio; + adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff); + gpio >>= 8; + adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff); + gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f); + adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(gpio, S_IRUGO | S_IWUSR, show_gpio, set_gpio); + + +static ssize_t show_gpio_mask(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%ld\n", data->gpio_mask); +} +static ssize_t set_gpio_mask(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + long mask; + + down(&data->update_lock); + data->gpio_mask = val & 0x1ffff; + mask = data->gpio_mask; + adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff); + mask >>= 8; + adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff); + mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f); + adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(gpio_mask, S_IRUGO | S_IWUSR, show_gpio_mask, set_gpio_mask); + +static ssize_t show_pwm_reg(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm1.pwm)); +} +static ssize_t set_pwm_reg(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + + if (data->pwm1.enable == 1) { + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->pwm1.pwm = PWM_TO_REG(val); + adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm); + up(&data->update_lock); + } + return count; +} +static ssize_t show_auto_pwm_min(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", data->pwm1.auto_pwm_min); +} +static ssize_t set_auto_pwm_min(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255); + if (data->pwm1.enable == 2) { /* apply immediately */ + data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) | + PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); + adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm); + } + up(&data->update_lock); + return count; +} +static ssize_t show_auto_pwm_max(struct device *dev, char *buf) +{ + return sprintf(buf,"%d\n", ADM1026_PWM_MAX); +} +static ssize_t show_pwm_enable(struct device *dev, char *buf) +{ + struct adm1026_data *data = adm1026_update_device(dev); + return sprintf(buf,"%d\n", data->pwm1.enable); +} +static ssize_t set_pwm_enable(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1026_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + int old_enable; + + if ((val >= 0) && (val < 3)) { + down(&data->update_lock); + old_enable = data->pwm1.enable; + data->pwm1.enable = val; + data->config1 = (data->config1 & ~CFG1_PWM_AFC) + | ((val == 2) ? CFG1_PWM_AFC : 0); + adm1026_write_value(client, ADM1026_REG_CONFIG1, + data->config1); + if (val == 2) { /* apply pwm1_auto_pwm_min to pwm1 */ + data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) | + PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); + adm1026_write_value(client, ADM1026_REG_PWM, + data->pwm1.pwm); + } else if (!((old_enable == 1) && (val == 1))) { + /* set pwm to safe value */ + data->pwm1.pwm = 255; + adm1026_write_value(client, ADM1026_REG_PWM, + data->pwm1.pwm); + } + up(&data->update_lock); + } + return count; +} + +/* enable PWM fan control */ +static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); +static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); +static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); +static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable, + set_pwm_enable); +static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable, + set_pwm_enable); +static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable, + set_pwm_enable); +static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm_min, set_auto_pwm_min); +static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm_min, set_auto_pwm_min); +static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm_min, set_auto_pwm_min); + +static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); +static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); +static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); + +int adm1026_detect(struct i2c_adapter *adapter, int address, + int kind) +{ + int company, verstep; + struct i2c_client *new_client; + struct adm1026_data *data; + int err = 0; + const char *type_name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + /* We need to be able to do byte I/O */ + goto exit; + }; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access adm1026_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data, 0, sizeof(struct adm1026_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &adm1026_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + + company = adm1026_read_value(new_client, ADM1026_REG_COMPANY); + verstep = adm1026_read_value(new_client, ADM1026_REG_VERSTEP); + + dev_dbg(&new_client->dev, "Detecting device at %d,0x%02x with" + " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", + i2c_adapter_id(new_client->adapter), new_client->addr, + company, verstep); + + /* If auto-detecting, Determine the chip type. */ + if (kind <= 0) { + dev_dbg(&new_client->dev, "Autodetecting device at %d,0x%02x " + "...\n", i2c_adapter_id(adapter), address); + if (company == ADM1026_COMPANY_ANALOG_DEV + && verstep == ADM1026_VERSTEP_ADM1026) { + kind = adm1026; + } else if (company == ADM1026_COMPANY_ANALOG_DEV + && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { + dev_err(&adapter->dev, ": Unrecognized stepping " + "0x%02x. Defaulting to ADM1026.\n", verstep); + kind = adm1026; + } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { + dev_err(&adapter->dev, ": Found version/stepping " + "0x%02x. Assuming generic ADM1026.\n", + verstep); + kind = any_chip; + } else { + dev_dbg(&new_client->dev, ": Autodetection " + "failed\n"); + /* Not an ADM1026 ... */ + if (kind == 0) { /* User used force=x,y */ + dev_err(&adapter->dev, "Generic ADM1026 not " + "found at %d,0x%02x. Try " + "force_adm1026.\n", + i2c_adapter_id(adapter), address); + } + err = 0; + goto exitfree; + } + } + + /* Fill in the chip specific driver values */ + switch (kind) { + case any_chip : + type_name = "adm1026"; + break; + case adm1026 : + type_name = "adm1026"; + break; + default : + dev_err(&adapter->dev, ": Internal error, invalid " + "kind (%d)!", kind); + err = -EFAULT; + goto exitfree; + } + strlcpy(new_client->name, type_name, I2C_NAME_SIZE); + + /* Fill in the remaining client fields */ + data->type = kind; + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exitfree; + + /* Set the VRM version */ + data->vrm = i2c_which_vrm(); + + /* Initialize the ADM1026 chip */ + adm1026_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in5_max); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in6_input); + device_create_file(&new_client->dev, &dev_attr_in6_max); + device_create_file(&new_client->dev, &dev_attr_in6_min); + device_create_file(&new_client->dev, &dev_attr_in7_input); + device_create_file(&new_client->dev, &dev_attr_in7_max); + device_create_file(&new_client->dev, &dev_attr_in7_min); + device_create_file(&new_client->dev, &dev_attr_in8_input); + device_create_file(&new_client->dev, &dev_attr_in8_max); + device_create_file(&new_client->dev, &dev_attr_in8_min); + device_create_file(&new_client->dev, &dev_attr_in9_input); + device_create_file(&new_client->dev, &dev_attr_in9_max); + device_create_file(&new_client->dev, &dev_attr_in9_min); + device_create_file(&new_client->dev, &dev_attr_in10_input); + device_create_file(&new_client->dev, &dev_attr_in10_max); + device_create_file(&new_client->dev, &dev_attr_in10_min); + device_create_file(&new_client->dev, &dev_attr_in11_input); + device_create_file(&new_client->dev, &dev_attr_in11_max); + device_create_file(&new_client->dev, &dev_attr_in11_min); + device_create_file(&new_client->dev, &dev_attr_in12_input); + device_create_file(&new_client->dev, &dev_attr_in12_max); + device_create_file(&new_client->dev, &dev_attr_in12_min); + device_create_file(&new_client->dev, &dev_attr_in13_input); + device_create_file(&new_client->dev, &dev_attr_in13_max); + device_create_file(&new_client->dev, &dev_attr_in13_min); + device_create_file(&new_client->dev, &dev_attr_in14_input); + device_create_file(&new_client->dev, &dev_attr_in14_max); + device_create_file(&new_client->dev, &dev_attr_in14_min); + device_create_file(&new_client->dev, &dev_attr_in15_input); + device_create_file(&new_client->dev, &dev_attr_in15_max); + device_create_file(&new_client->dev, &dev_attr_in15_min); + device_create_file(&new_client->dev, &dev_attr_in16_input); + device_create_file(&new_client->dev, &dev_attr_in16_max); + device_create_file(&new_client->dev, &dev_attr_in16_min); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan3_input); + device_create_file(&new_client->dev, &dev_attr_fan3_div); + device_create_file(&new_client->dev, &dev_attr_fan3_min); + device_create_file(&new_client->dev, &dev_attr_fan4_input); + device_create_file(&new_client->dev, &dev_attr_fan4_div); + device_create_file(&new_client->dev, &dev_attr_fan4_min); + device_create_file(&new_client->dev, &dev_attr_fan5_input); + device_create_file(&new_client->dev, &dev_attr_fan5_div); + device_create_file(&new_client->dev, &dev_attr_fan5_min); + device_create_file(&new_client->dev, &dev_attr_fan6_input); + device_create_file(&new_client->dev, &dev_attr_fan6_div); + device_create_file(&new_client->dev, &dev_attr_fan6_min); + device_create_file(&new_client->dev, &dev_attr_fan7_input); + device_create_file(&new_client->dev, &dev_attr_fan7_div); + device_create_file(&new_client->dev, &dev_attr_fan7_min); + device_create_file(&new_client->dev, &dev_attr_fan8_input); + device_create_file(&new_client->dev, &dev_attr_fan8_div); + device_create_file(&new_client->dev, &dev_attr_fan8_min); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp3_min); + device_create_file(&new_client->dev, &dev_attr_temp1_offset); + device_create_file(&new_client->dev, &dev_attr_temp2_offset); + device_create_file(&new_client->dev, &dev_attr_temp3_offset); + device_create_file(&new_client->dev, + &dev_attr_temp1_auto_point1_temp); + device_create_file(&new_client->dev, + &dev_attr_temp2_auto_point1_temp); + device_create_file(&new_client->dev, + &dev_attr_temp3_auto_point1_temp); + device_create_file(&new_client->dev, + &dev_attr_temp1_auto_point1_temp_hyst); + device_create_file(&new_client->dev, + &dev_attr_temp2_auto_point1_temp_hyst); + device_create_file(&new_client->dev, + &dev_attr_temp3_auto_point1_temp_hyst); + device_create_file(&new_client->dev, + &dev_attr_temp1_auto_point2_temp); + device_create_file(&new_client->dev, + &dev_attr_temp2_auto_point2_temp); + device_create_file(&new_client->dev, + &dev_attr_temp3_auto_point2_temp); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + device_create_file(&new_client->dev, &dev_attr_temp3_crit); + device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable); + device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable); + device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable); + device_create_file(&new_client->dev, &dev_attr_vid); + device_create_file(&new_client->dev, &dev_attr_vrm); + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_alarm_mask); + device_create_file(&new_client->dev, &dev_attr_gpio); + device_create_file(&new_client->dev, &dev_attr_gpio_mask); + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &dev_attr_pwm3); + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + device_create_file(&new_client->dev, &dev_attr_pwm2_enable); + device_create_file(&new_client->dev, &dev_attr_pwm3_enable); + device_create_file(&new_client->dev, &dev_attr_temp1_auto_point1_pwm); + device_create_file(&new_client->dev, &dev_attr_temp2_auto_point1_pwm); + device_create_file(&new_client->dev, &dev_attr_temp3_auto_point1_pwm); + device_create_file(&new_client->dev, &dev_attr_temp1_auto_point2_pwm); + device_create_file(&new_client->dev, &dev_attr_temp2_auto_point2_pwm); + device_create_file(&new_client->dev, &dev_attr_temp3_auto_point2_pwm); + device_create_file(&new_client->dev, &dev_attr_analog_out); + return 0; + + /* Error out and cleanup code */ +exitfree: + kfree(new_client); +exit: + return err; +} +static int __init sm_adm1026_init(void) +{ + return i2c_add_driver(&adm1026_driver); +} + +static void __exit sm_adm1026_exit(void) +{ + i2c_del_driver(&adm1026_driver); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, " + "Justin Thiessen <jthiessen@penguincomputing.com>"); +MODULE_DESCRIPTION("ADM1026 driver"); + +module_init(sm_adm1026_init); +module_exit(sm_adm1026_exit); diff --git a/drivers/i2c/chips/adm1031.c b/drivers/i2c/chips/adm1031.c new file mode 100644 index 000000000000..d4385a23f79a --- /dev/null +++ b/drivers/i2c/chips/adm1031.c @@ -0,0 +1,977 @@ +/* + adm1031.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Based on lm75.c and lm85.c + Supports adm1030 / adm1031 + Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org> + Reworked by Jean Delvare <khali@linux-fr.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* Following macros takes channel parameter starting from 0 to 2 */ +#define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr)) +#define ADM1031_REG_FAN_DIV(nr) (0x20 + (nr)) +#define ADM1031_REG_PWM (0x22) +#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr)) + +#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4*(nr)) +#define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4*(nr)) +#define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4*(nr)) + +#define ADM1031_REG_TEMP(nr) (0xa + (nr)) +#define ADM1031_REG_AUTO_TEMP(nr) (0x24 + (nr)) + +#define ADM1031_REG_STATUS(nr) (0x2 + (nr)) + +#define ADM1031_REG_CONF1 0x0 +#define ADM1031_REG_CONF2 0x1 +#define ADM1031_REG_EXT_TEMP 0x6 + +#define ADM1031_CONF1_MONITOR_ENABLE 0x01 /* Monitoring enable */ +#define ADM1031_CONF1_PWM_INVERT 0x08 /* PWM Invert */ +#define ADM1031_CONF1_AUTO_MODE 0x80 /* Auto FAN */ + +#define ADM1031_CONF2_PWM1_ENABLE 0x01 +#define ADM1031_CONF2_PWM2_ENABLE 0x02 +#define ADM1031_CONF2_TACH1_ENABLE 0x04 +#define ADM1031_CONF2_TACH2_ENABLE 0x08 +#define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan)) + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_2(adm1030, adm1031); + +typedef u8 auto_chan_table_t[8][2]; + +/* Each client has this additional data */ +struct adm1031_data { + struct i2c_client client; + struct semaphore update_lock; + int chip_type; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + /* The chan_select_table contains the possible configurations for + * auto fan control. + */ + auto_chan_table_t *chan_select_table; + u16 alarm; + u8 conf1; + u8 conf2; + u8 fan[2]; + u8 fan_div[2]; + u8 fan_min[2]; + u8 pwm[2]; + u8 old_pwm[2]; + s8 temp[3]; + u8 ext_temp[3]; + u8 auto_temp[3]; + u8 auto_temp_min[3]; + u8 auto_temp_off[3]; + u8 auto_temp_max[3]; + s8 temp_min[3]; + s8 temp_max[3]; + s8 temp_crit[3]; +}; + +static int adm1031_attach_adapter(struct i2c_adapter *adapter); +static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind); +static void adm1031_init_client(struct i2c_client *client); +static int adm1031_detach_client(struct i2c_client *client); +static struct adm1031_data *adm1031_update_device(struct device *dev); + +/* This is the driver that will be inserted */ +static struct i2c_driver adm1031_driver = { + .owner = THIS_MODULE, + .name = "adm1031", + .flags = I2C_DF_NOTIFY, + .attach_adapter = adm1031_attach_adapter, + .detach_client = adm1031_detach_client, +}; + +static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int +adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + + +#define TEMP_TO_REG(val) (((val) < 0 ? ((val - 500) / 1000) : \ + ((val + 500) / 1000))) + +#define TEMP_FROM_REG(val) ((val) * 1000) + +#define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125) + +#define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0) + +static int FAN_TO_REG(int reg, int div) +{ + int tmp; + tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div); + return tmp > 255 ? 255 : tmp; +} + +#define FAN_DIV_FROM_REG(reg) (1<<(((reg)&0xc0)>>6)) + +#define PWM_TO_REG(val) (SENSORS_LIMIT((val), 0, 255) >> 4) +#define PWM_FROM_REG(val) ((val) << 4) + +#define FAN_CHAN_FROM_REG(reg) (((reg) >> 5) & 7) +#define FAN_CHAN_TO_REG(val, reg) \ + (((reg) & 0x1F) | (((val) << 5) & 0xe0)) + +#define AUTO_TEMP_MIN_TO_REG(val, reg) \ + ((((val)/500) & 0xf8)|((reg) & 0x7)) +#define AUTO_TEMP_RANGE_FROM_REG(reg) (5000 * (1<< ((reg)&0x7))) +#define AUTO_TEMP_MIN_FROM_REG(reg) (1000 * ((((reg) >> 3) & 0x1f) << 2)) + +#define AUTO_TEMP_MIN_FROM_REG_DEG(reg) ((((reg) >> 3) & 0x1f) << 2) + +#define AUTO_TEMP_OFF_FROM_REG(reg) \ + (AUTO_TEMP_MIN_FROM_REG(reg) - 5000) + +#define AUTO_TEMP_MAX_FROM_REG(reg) \ + (AUTO_TEMP_RANGE_FROM_REG(reg) + \ + AUTO_TEMP_MIN_FROM_REG(reg)) + +static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm) +{ + int ret; + int range = val - AUTO_TEMP_MIN_FROM_REG(reg); + + range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm); + ret = ((reg & 0xf8) | + (range < 10000 ? 0 : + range < 20000 ? 1 : + range < 40000 ? 2 : range < 80000 ? 3 : 4)); + return ret; +} + +/* FAN auto control */ +#define GET_FAN_AUTO_BITFIELD(data, idx) \ + (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2] + +/* The tables below contains the possible values for the auto fan + * control bitfields. the index in the table is the register value. + * MSb is the auto fan control enable bit, so the four first entries + * in the table disables auto fan control when both bitfields are zero. + */ +static auto_chan_table_t auto_channel_select_table_adm1031 = { + {0, 0}, {0, 0}, {0, 0}, {0, 0}, + {2 /*0b010 */ , 4 /*0b100 */ }, + {2 /*0b010 */ , 2 /*0b010 */ }, + {4 /*0b100 */ , 4 /*0b100 */ }, + {7 /*0b111 */ , 7 /*0b111 */ }, +}; + +static auto_chan_table_t auto_channel_select_table_adm1030 = { + {0, 0}, {0, 0}, {0, 0}, {0, 0}, + {2 /*0b10 */ , 0}, + {0xff /*invalid */ , 0}, + {0xff /*invalid */ , 0}, + {3 /*0b11 */ , 0}, +}; + +/* That function checks if a bitfield is valid and returns the other bitfield + * nearest match if no exact match where found. + */ +static int +get_fan_auto_nearest(struct adm1031_data *data, + int chan, u8 val, u8 reg, u8 * new_reg) +{ + int i; + int first_match = -1, exact_match = -1; + u8 other_reg_val = + (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1]; + + if (val == 0) { + *new_reg = 0; + return 0; + } + + for (i = 0; i < 8; i++) { + if ((val == (*data->chan_select_table)[i][chan]) && + ((*data->chan_select_table)[i][chan ? 0 : 1] == + other_reg_val)) { + /* We found an exact match */ + exact_match = i; + break; + } else if (val == (*data->chan_select_table)[i][chan] && + first_match == -1) { + /* Save the first match in case of an exact match has not been + * found + */ + first_match = i; + } + } + + if (exact_match >= 0) { + *new_reg = exact_match; + } else if (first_match >= 0) { + *new_reg = first_match; + } else { + return -EINVAL; + } + return 0; +} + +static ssize_t show_fan_auto_channel(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr)); +} + +static ssize_t +set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + u8 reg; + int ret; + u8 old_fan_mode; + + old_fan_mode = data->conf1; + + down(&data->update_lock); + + if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, ®))) { + up(&data->update_lock); + return ret; + } + if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ + (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) { + if (data->conf1 & ADM1031_CONF1_AUTO_MODE){ + /* Switch to Auto Fan Mode + * Save PWM registers + * Set PWM registers to 33% Both */ + data->old_pwm[0] = data->pwm[0]; + data->old_pwm[1] = data->pwm[1]; + adm1031_write_value(client, ADM1031_REG_PWM, 0x55); + } else { + /* Switch to Manual Mode */ + data->pwm[0] = data->old_pwm[0]; + data->pwm[1] = data->old_pwm[1]; + /* Restore PWM registers */ + adm1031_write_value(client, ADM1031_REG_PWM, + data->pwm[0] | (data->pwm[1] << 4)); + } + } + data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); + adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1); + up(&data->update_lock); + return count; +} + +#define fan_auto_channel_offset(offset) \ +static ssize_t show_fan_auto_channel_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan_auto_channel(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_auto_channel_##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_auto_channel(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(auto_fan##offset##_channel, S_IRUGO | S_IWUSR, \ + show_fan_auto_channel_##offset, \ + set_fan_auto_channel_##offset) + +fan_auto_channel_offset(1); +fan_auto_channel_offset(2); + +/* Auto Temps */ +static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr])); +} +static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr])); +} +static ssize_t +set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); + adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), + data->auto_temp[nr]); + up(&data->update_lock); + return count; +} +static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr])); +} +static ssize_t +set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]); + adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), + data->temp_max[nr]); + up(&data->update_lock); + return count; +} + +#define auto_temp_reg(offset) \ +static ssize_t show_auto_temp_##offset##_off (struct device *dev, char *buf) \ +{ \ + return show_auto_temp_off(dev, buf, offset - 1); \ +} \ +static ssize_t show_auto_temp_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_auto_temp_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_auto_temp_##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_auto_temp_max(dev, buf, offset - 1); \ +} \ +static ssize_t set_auto_temp_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_auto_temp_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_auto_temp_##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_auto_temp_max(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO, \ + show_auto_temp_##offset##_off, NULL); \ +static DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_auto_temp_##offset##_min, set_auto_temp_##offset##_min);\ +static DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_auto_temp_##offset##_max, set_auto_temp_##offset##_max) + +auto_temp_reg(1); +auto_temp_reg(2); +auto_temp_reg(3); + +/* pwm */ +static ssize_t show_pwm(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); +} +static ssize_t +set_pwm(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + int reg; + + down(&data->update_lock); + if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && + (((val>>4) & 0xf) != 5)) { + /* In automatic mode, the only PWM accepted is 33% */ + up(&data->update_lock); + return -EINVAL; + } + data->pwm[nr] = PWM_TO_REG(val); + reg = adm1031_read_value(client, ADM1031_REG_PWM); + adm1031_write_value(client, ADM1031_REG_PWM, + nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf) + : (data->pwm[nr] & 0xf) | (reg & 0xf0)); + up(&data->update_lock); + return count; +} + +#define pwm_reg(offset) \ +static ssize_t show_pwm_##offset (struct device *dev, char *buf) \ +{ \ + return show_pwm(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm_##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_pwm_##offset, set_pwm_##offset) + +pwm_reg(1); +pwm_reg(2); + +/* Fans */ + +/* + * That function checks the cases where the fan reading is not + * relevent. It is used to provide 0 as fan reading when the fan is + * not supposed to run + */ +static int trust_fan_readings(struct adm1031_data *data, int chan) +{ + int res = 0; + + if (data->conf1 & ADM1031_CONF1_AUTO_MODE) { + switch (data->conf1 & 0x60) { + case 0x00: /* remote temp1 controls fan1 remote temp2 controls fan2 */ + res = data->temp[chan+1] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]); + break; + case 0x20: /* remote temp1 controls both fans */ + res = + data->temp[1] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]); + break; + case 0x40: /* remote temp2 controls both fans */ + res = + data->temp[2] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]); + break; + case 0x60: /* max controls both fans */ + res = + data->temp[0] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0]) + || data->temp[1] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]) + || (data->chip_type == adm1031 + && data->temp[2] >= + AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2])); + break; + } + } else { + res = data->pwm[chan] > 0; + } + return res; +} + + +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + int value; + + value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr], + FAN_DIV_FROM_REG(data->fan_div[nr])) : 0; + return sprintf(buf, "%d\n", value); +} + +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr])); +} +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + FAN_FROM_REG(data->fan_min[nr], + FAN_DIV_FROM_REG(data->fan_div[nr]))); +} +static ssize_t +set_fan_min(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + if (val) { + data->fan_min[nr] = + FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr])); + } else { + data->fan_min[nr] = 0xff; + } + adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t +set_fan_div(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + u8 tmp; + int old_div; + int new_min; + + tmp = val == 8 ? 0xc0 : + val == 4 ? 0x80 : + val == 2 ? 0x40 : + val == 1 ? 0x00 : + 0xff; + if (tmp == 0xff) + return -EINVAL; + + down(&data->update_lock); + old_div = FAN_DIV_FROM_REG(data->fan_div[nr]); + data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]); + new_min = data->fan_min[nr] * old_div / + FAN_DIV_FROM_REG(data->fan_div[nr]); + data->fan_min[nr] = new_min > 0xff ? 0xff : new_min; + data->fan[nr] = data->fan[nr] * old_div / + FAN_DIV_FROM_REG(data->fan_div[nr]); + + adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr), + data->fan_div[nr]); + adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), + data->fan_min[nr]); + up(&data->update_lock); + return count; +} + +#define fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_div (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \ + NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_div, set_fan_##offset##_div); \ +static DEVICE_ATTR(auto_fan##offset##_min_pwm, S_IRUGO | S_IWUSR, \ + show_pwm_##offset, set_pwm_##offset) + +fan_offset(1); +fan_offset(2); + + +/* Temps */ +static ssize_t show_temp(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + int ext; + ext = nr == 0 ? + ((data->ext_temp[nr] >> 6) & 0x3) * 2 : + (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7)); + return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext)); +} +static ssize_t show_temp_min(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); +} +static ssize_t show_temp_max(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); +} +static ssize_t show_temp_crit(struct device *dev, char *buf, int nr) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr])); +} +static ssize_t +set_temp_min(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val; + + val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); + down(&data->update_lock); + data->temp_min[nr] = TEMP_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), + data->temp_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t +set_temp_max(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val; + + val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); + down(&data->update_lock); + data->temp_max[nr] = TEMP_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), + data->temp_max[nr]); + up(&data->update_lock); + return count; +} +static ssize_t +set_temp_crit(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int val; + + val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); + down(&data->update_lock); + data->temp_crit[nr] = TEMP_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), + data->temp_crit[nr]); + up(&data->update_lock); + return count; +} + +#define temp_reg(offset) \ +static ssize_t show_temp_##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_temp_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp_##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_temp_max(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp_##offset##_crit (struct device *dev, char *buf) \ +{ \ + return show_temp_crit(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_max(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_crit (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_crit(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \ + NULL); \ +static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_min, set_temp_##offset##_min); \ +static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_max, set_temp_##offset##_max); \ +static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_crit, set_temp_##offset##_crit) + +temp_reg(1); +temp_reg(2); +temp_reg(3); + +/* Alarms */ +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", data->alarm); +} + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + + +static int adm1031_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, adm1031_detect); +} + +/* This function is called by i2c_detect */ +static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct adm1031_data *data; + int err = 0; + const char *name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct adm1031_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &adm1031_driver; + new_client->flags = 0; + + if (kind < 0) { + int id, co; + id = i2c_smbus_read_byte_data(new_client, 0x3d); + co = i2c_smbus_read_byte_data(new_client, 0x3e); + + if (!((id == 0x31 || id == 0x30) && co == 0x41)) + goto exit_free; + kind = (id == 0x30) ? adm1030 : adm1031; + } + + if (kind <= 0) + kind = adm1031; + + /* Given the detected chip type, set the chip name and the + * auto fan control helper table. */ + if (kind == adm1030) { + name = "adm1030"; + data->chan_select_table = &auto_channel_select_table_adm1030; + } else if (kind == adm1031) { + name = "adm1031"; + data->chan_select_table = &auto_channel_select_table_adm1031; + } + data->chip_type = kind; + + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the ADM1031 chip */ + adm1031_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + + device_create_file(&new_client->dev, &dev_attr_auto_temp1_off); + device_create_file(&new_client->dev, &dev_attr_auto_temp1_min); + device_create_file(&new_client->dev, &dev_attr_auto_temp1_max); + + device_create_file(&new_client->dev, &dev_attr_auto_temp2_off); + device_create_file(&new_client->dev, &dev_attr_auto_temp2_min); + device_create_file(&new_client->dev, &dev_attr_auto_temp2_max); + + device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm); + + device_create_file(&new_client->dev, &dev_attr_alarms); + + if (kind == adm1031) { + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, + &dev_attr_auto_fan2_channel); + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp3_min); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp3_crit); + device_create_file(&new_client->dev, &dev_attr_auto_temp3_off); + device_create_file(&new_client->dev, &dev_attr_auto_temp3_min); + device_create_file(&new_client->dev, &dev_attr_auto_temp3_max); + device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm); + } + + return 0; + +exit_free: + kfree(new_client); +exit: + return err; +} + +static int adm1031_detach_client(struct i2c_client *client) +{ + int ret; + if ((ret = i2c_detach_client(client)) != 0) { + return ret; + } + kfree(client); + return 0; +} + +static void adm1031_init_client(struct i2c_client *client) +{ + unsigned int read_val; + unsigned int mask; + struct adm1031_data *data = i2c_get_clientdata(client); + + mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE); + if (data->chip_type == adm1031) { + mask |= (ADM1031_CONF2_PWM2_ENABLE | + ADM1031_CONF2_TACH2_ENABLE); + } + /* Initialize the ADM1031 chip (enables fan speed reading ) */ + read_val = adm1031_read_value(client, ADM1031_REG_CONF2); + if ((read_val | mask) != read_val) { + adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask); + } + + read_val = adm1031_read_value(client, ADM1031_REG_CONF1); + if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) { + adm1031_write_value(client, ADM1031_REG_CONF1, read_val | + ADM1031_CONF1_MONITOR_ENABLE); + } + +} + +static struct adm1031_data *adm1031_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int chan; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + + dev_dbg(&client->dev, "Starting adm1031 update\n"); + for (chan = 0; + chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) { + u8 oldh, newh; + + oldh = + adm1031_read_value(client, ADM1031_REG_TEMP(chan)); + data->ext_temp[chan] = + adm1031_read_value(client, ADM1031_REG_EXT_TEMP); + newh = + adm1031_read_value(client, ADM1031_REG_TEMP(chan)); + if (newh != oldh) { + data->ext_temp[chan] = + adm1031_read_value(client, + ADM1031_REG_EXT_TEMP); +#ifdef DEBUG + oldh = + adm1031_read_value(client, + ADM1031_REG_TEMP(chan)); + + /* oldh is actually newer */ + if (newh != oldh) + dev_warn(&client->dev, + "Remote temperature may be " + "wrong.\n"); +#endif + } + data->temp[chan] = newh; + + data->temp_min[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_MIN(chan)); + data->temp_max[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_MAX(chan)); + data->temp_crit[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_CRIT(chan)); + data->auto_temp[chan] = + adm1031_read_value(client, + ADM1031_REG_AUTO_TEMP(chan)); + + } + + data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1); + data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2); + + data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0)) + | (adm1031_read_value(client, ADM1031_REG_STATUS(1)) + << 8); + if (data->chip_type == adm1030) { + data->alarm &= 0xc0ff; + } + + for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) { + data->fan_div[chan] = + adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan)); + data->fan_min[chan] = + adm1031_read_value(client, ADM1031_REG_FAN_MIN(chan)); + data->fan[chan] = + adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan)); + data->pwm[chan] = + 0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >> + (4*chan)); + } + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_adm1031_init(void) +{ + return i2c_add_driver(&adm1031_driver); +} + +static void __exit sensors_adm1031_exit(void) +{ + i2c_del_driver(&adm1031_driver); +} + +MODULE_AUTHOR("Alexandre d'Alton <alex@alexdalton.org>"); +MODULE_DESCRIPTION("ADM1031/ADM1030 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_adm1031_init); +module_exit(sensors_adm1031_exit); diff --git a/drivers/i2c/chips/asb100.c b/drivers/i2c/chips/asb100.c new file mode 100644 index 000000000000..7f899002bc54 --- /dev/null +++ b/drivers/i2c/chips/asb100.c @@ -0,0 +1,1066 @@ +/* + asb100.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + + Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com> + + (derived from w83781d.c) + + Copyright (C) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, and + Mark Studebaker <mdsxyz123@yahoo.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + This driver supports the hardware sensor chips: Asus ASB100 and + ASB100-A "BACH". + + ASB100-A supports pwm1, while plain ASB100 does not. There is no known + way for the driver to tell which one is there. + + Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + asb100 7 3 1 4 0x31 0x0694 yes no +*/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> +#include <linux/init.h> +#include "lm75.h" + +/* + HISTORY: + 2003-12-29 1.0.0 Ported from lm_sensors project for kernel 2.6 +*/ +#define ASB100_VERSION "1.0.0" + +/* I2C addresses to scan */ +static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; + +/* ISA addresses to scan (none) */ +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(asb100); +I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + "{bus, clientaddr, subclientaddr1, subclientaddr2}"); + +/* Voltage IN registers 0-6 */ +#define ASB100_REG_IN(nr) (0x20 + (nr)) +#define ASB100_REG_IN_MAX(nr) (0x2b + (nr * 2)) +#define ASB100_REG_IN_MIN(nr) (0x2c + (nr * 2)) + +/* FAN IN registers 1-3 */ +#define ASB100_REG_FAN(nr) (0x28 + (nr)) +#define ASB100_REG_FAN_MIN(nr) (0x3b + (nr)) + +/* TEMPERATURE registers 1-4 */ +static const u16 asb100_reg_temp[] = {0, 0x27, 0x150, 0x250, 0x17}; +static const u16 asb100_reg_temp_max[] = {0, 0x39, 0x155, 0x255, 0x18}; +static const u16 asb100_reg_temp_hyst[] = {0, 0x3a, 0x153, 0x253, 0x19}; + +#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr]) +#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr]) +#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr]) + +#define ASB100_REG_TEMP2_CONFIG 0x0152 +#define ASB100_REG_TEMP3_CONFIG 0x0252 + + +#define ASB100_REG_CONFIG 0x40 +#define ASB100_REG_ALARM1 0x41 +#define ASB100_REG_ALARM2 0x42 +#define ASB100_REG_SMIM1 0x43 +#define ASB100_REG_SMIM2 0x44 +#define ASB100_REG_VID_FANDIV 0x47 +#define ASB100_REG_I2C_ADDR 0x48 +#define ASB100_REG_CHIPID 0x49 +#define ASB100_REG_I2C_SUBADDR 0x4a +#define ASB100_REG_PIN 0x4b +#define ASB100_REG_IRQ 0x4c +#define ASB100_REG_BANK 0x4e +#define ASB100_REG_CHIPMAN 0x4f + +#define ASB100_REG_WCHIPID 0x58 + +/* bit 7 -> enable, bits 0-3 -> duty cycle */ +#define ASB100_REG_PWM1 0x59 + +/* CONVERSIONS + Rounding and limit checking is only done on the TO_REG variants. */ + +/* These constants are a guess, consistent w/ w83781d */ +#define ASB100_IN_MIN ( 0) +#define ASB100_IN_MAX (4080) + +/* IN: 1/1000 V (0V to 4.08V) + REG: 16mV/bit */ +static u8 IN_TO_REG(unsigned val) +{ + unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX); + return (nval + 8) / 16; +} + +static unsigned IN_FROM_REG(u8 reg) +{ + return reg * 16; +} + +static u8 FAN_TO_REG(long rpm, int div) +{ + if (rpm == -1) + return 0; + if (rpm == 0) + return 255; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +static int FAN_FROM_REG(u8 val, int div) +{ + return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); +} + +/* These constants are a guess, consistent w/ w83781d */ +#define ASB100_TEMP_MIN (-128000) +#define ASB100_TEMP_MAX ( 127000) + +/* TEMP: 0.001C/bit (-128C to +127C) + REG: 1C/bit, two's complement */ +static u8 TEMP_TO_REG(int temp) +{ + int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX); + ntemp += (ntemp<0 ? -500 : 500); + return (u8)(ntemp / 1000); +} + +static int TEMP_FROM_REG(u8 reg) +{ + return (s8)reg * 1000; +} + +/* PWM: 0 - 255 per sensors documentation + REG: (6.25% duty cycle per bit) */ +static u8 ASB100_PWM_TO_REG(int pwm) +{ + pwm = SENSORS_LIMIT(pwm, 0, 255); + return (u8)(pwm / 16); +} + +static int ASB100_PWM_FROM_REG(u8 reg) +{ + return reg * 16; +} + +#define ALARMS_FROM_REG(val) (val) + +#define DIV_FROM_REG(val) (1 << (val)) + +/* FAN DIV: 1, 2, 4, or 8 (defaults to 2) + REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */ +static u8 DIV_TO_REG(long val) +{ + return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1; +} + +/* For each registered client, we need to keep some data in memory. That + data is pointed to by client->data. The structure itself is + dynamically allocated, at the same time the client itself is allocated. */ +struct asb100_data { + struct i2c_client client; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + unsigned long last_updated; /* In jiffies */ + + /* array of 2 pointers to subclients */ + struct i2c_client *lm75[2]; + + char valid; /* !=0 if following fields are valid */ + u8 in[7]; /* Register value */ + u8 in_max[7]; /* Register value */ + u8 in_min[7]; /* Register value */ + u8 fan[3]; /* Register value */ + u8 fan_min[3]; /* Register value */ + u16 temp[4]; /* Register value (0 and 3 are u8 only) */ + u16 temp_max[4]; /* Register value (0 and 3 are u8 only) */ + u16 temp_hyst[4]; /* Register value (0 and 3 are u8 only) */ + u8 fan_div[3]; /* Register encoding, right justified */ + u8 pwm; /* Register encoding */ + u8 vid; /* Register encoding, combined */ + u32 alarms; /* Register encoding, combined */ + u8 vrm; +}; + +static int asb100_read_value(struct i2c_client *client, u16 reg); +static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val); + +static int asb100_attach_adapter(struct i2c_adapter *adapter); +static int asb100_detect(struct i2c_adapter *adapter, int address, int kind); +static int asb100_detach_client(struct i2c_client *client); +static struct asb100_data *asb100_update_device(struct device *dev); +static void asb100_init_client(struct i2c_client *client); + +static struct i2c_driver asb100_driver = { + .owner = THIS_MODULE, + .name = "asb100", + .id = I2C_DRIVERID_ASB100, + .flags = I2C_DF_NOTIFY, + .attach_adapter = asb100_attach_adapter, + .detach_client = asb100_detach_client, +}; + +/* 7 Voltages */ +#define show_in_reg(reg) \ +static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct asb100_data *data = asb100_update_device(dev); \ + return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \ +} + +show_in_reg(in) +show_in_reg(in_min) +show_in_reg(in_max) + +#define set_in_reg(REG, reg) \ +static ssize_t set_in_##reg(struct device *dev, const char *buf, \ + size_t count, int nr) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct asb100_data *data = i2c_get_clientdata(client); \ + unsigned long val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_##reg[nr] = IN_TO_REG(val); \ + asb100_write_value(client, ASB100_REG_IN_##REG(nr), \ + data->in_##reg[nr]); \ + up(&data->update_lock); \ + return count; \ +} + +set_in_reg(MIN, min) +set_in_reg(MAX, max) + +#define sysfs_in(offset) \ +static ssize_t \ + show_in##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in##offset, NULL); \ +static ssize_t \ + show_in##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t \ + show_in##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t set_in##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t set_in##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); + +sysfs_in(0); +sysfs_in(1); +sysfs_in(2); +sysfs_in(3); +sysfs_in(4); +sysfs_in(5); +sysfs_in(6); + +#define device_create_file_in(client, offset) do { \ + device_create_file(&client->dev, &dev_attr_in##offset##_input); \ + device_create_file(&client->dev, &dev_attr_in##offset##_min); \ + device_create_file(&client->dev, &dev_attr_in##offset##_max); \ +} while (0) + +/* 3 Fans */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], + DIV_FROM_REG(data->fan_div[nr]))); +} + +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr]))); +} + +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); +} + +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct asb100_data *data = i2c_get_clientdata(client); + u32 val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + return count; +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least suprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct asb100_data *data = i2c_get_clientdata(client); + unsigned long min; + unsigned long val = simple_strtoul(buf, NULL, 10); + int reg; + + down(&data->update_lock); + + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + data->fan_div[nr] = DIV_TO_REG(val); + + switch(nr) { + case 0: /* fan 1 */ + reg = asb100_read_value(client, ASB100_REG_VID_FANDIV); + reg = (reg & 0xcf) | (data->fan_div[0] << 4); + asb100_write_value(client, ASB100_REG_VID_FANDIV, reg); + break; + + case 1: /* fan 2 */ + reg = asb100_read_value(client, ASB100_REG_VID_FANDIV); + reg = (reg & 0x3f) | (data->fan_div[1] << 6); + asb100_write_value(client, ASB100_REG_VID_FANDIV, reg); + break; + + case 2: /* fan 3 */ + reg = asb100_read_value(client, ASB100_REG_PIN); + reg = (reg & 0x3f) | (data->fan_div[2] << 6); + asb100_write_value(client, ASB100_REG_PIN, reg); + break; + } + + data->fan_min[nr] = + FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); + + up(&data->update_lock); + + return count; +} + +#define sysfs_fan(offset) \ +static ssize_t show_fan##offset(struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan##offset##_min(struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan##offset##_div(struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_fan##offset##_div(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan##offset, NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan##offset##_min, set_fan##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan##offset##_div, set_fan##offset##_div); + +sysfs_fan(1); +sysfs_fan(2); +sysfs_fan(3); + +#define device_create_file_fan(client, offset) do { \ + device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ + device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ + device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ +} while (0) + +/* 4 Temp. Sensors */ +static int sprintf_temp_from_reg(u16 reg, char *buf, int nr) +{ + int ret = 0; + + switch (nr) { + case 1: case 2: + ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg)); + break; + case 0: case 3: default: + ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg)); + break; + } + return ret; +} + +#define show_temp_reg(reg) \ +static ssize_t show_##reg(struct device *dev, char *buf, int nr) \ +{ \ + struct asb100_data *data = asb100_update_device(dev); \ + return sprintf_temp_from_reg(data->reg[nr], buf, nr); \ +} + +show_temp_reg(temp); +show_temp_reg(temp_max); +show_temp_reg(temp_hyst); + +#define set_temp_reg(REG, reg) \ +static ssize_t set_##reg(struct device *dev, const char *buf, \ + size_t count, int nr) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct asb100_data *data = i2c_get_clientdata(client); \ + unsigned long val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + switch (nr) { \ + case 1: case 2: \ + data->reg[nr] = LM75_TEMP_TO_REG(val); \ + break; \ + case 0: case 3: default: \ + data->reg[nr] = TEMP_TO_REG(val); \ + break; \ + } \ + asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \ + data->reg[nr]); \ + up(&data->update_lock); \ + return count; \ +} + +set_temp_reg(MAX, temp_max); +set_temp_reg(HYST, temp_hyst); + +#define sysfs_temp(num) \ +static ssize_t show_temp##num(struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, num-1); \ +} \ +static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL); \ +static ssize_t show_temp_max##num(struct device *dev, char *buf) \ +{ \ + return show_temp_max(dev, buf, num-1); \ +} \ +static ssize_t set_temp_max##num(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return set_temp_max(dev, buf, count, num-1); \ +} \ +static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \ + show_temp_max##num, set_temp_max##num); \ +static ssize_t show_temp_hyst##num(struct device *dev, char *buf) \ +{ \ + return show_temp_hyst(dev, buf, num-1); \ +} \ +static ssize_t set_temp_hyst##num(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return set_temp_hyst(dev, buf, count, num-1); \ +} \ +static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \ + show_temp_hyst##num, set_temp_hyst##num); + +sysfs_temp(1); +sysfs_temp(2); +sysfs_temp(3); +sysfs_temp(4); + +/* VID */ +#define device_create_file_temp(client, num) do { \ + device_create_file(&client->dev, &dev_attr_temp##num##_input); \ + device_create_file(&client->dev, &dev_attr_temp##num##_max); \ + device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \ +} while (0) + +static ssize_t show_vid(struct device *dev, char *buf) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} + +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); +#define device_create_file_vid(client) \ +device_create_file(&client->dev, &dev_attr_cpu0_vid) + +/* VRM */ +static ssize_t show_vrm(struct device *dev, char *buf) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", data->vrm); +} + +static ssize_t set_vrm(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct asb100_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + data->vrm = val; + return count; +} + +/* Alarms */ +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); +#define device_create_file_vrm(client) \ +device_create_file(&client->dev, &dev_attr_vrm); + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->alarms)); +} + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +#define device_create_file_alarms(client) \ +device_create_file(&client->dev, &dev_attr_alarms) + +/* 1 PWM */ +static ssize_t show_pwm1(struct device *dev, char *buf) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f)); +} + +static ssize_t set_pwm1(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct asb100_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->pwm &= 0x80; /* keep the enable bit */ + data->pwm |= (0x0f & ASB100_PWM_TO_REG(val)); + asb100_write_value(client, ASB100_REG_PWM1, data->pwm); + up(&data->update_lock); + return count; +} + +static ssize_t show_pwm_enable1(struct device *dev, char *buf) +{ + struct asb100_data *data = asb100_update_device(dev); + return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0); +} + +static ssize_t set_pwm_enable1(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct asb100_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->pwm &= 0x0f; /* keep the duty cycle bits */ + data->pwm |= (val ? 0x80 : 0x00); + asb100_write_value(client, ASB100_REG_PWM1, data->pwm); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1); +static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, + show_pwm_enable1, set_pwm_enable1); +#define device_create_file_pwm1(client) do { \ + device_create_file(&new_client->dev, &dev_attr_pwm1); \ + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \ +} while (0) + +/* This function is called when: + asb100_driver is inserted (when this module is loaded), for each + available adapter + when a new adapter is inserted (and asb100_driver is still present) + */ +static int asb100_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, asb100_detect); +} + +static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, + int kind, struct i2c_client *new_client) +{ + int i, id, err; + struct asb100_data *data = i2c_get_clientdata(new_client); + + data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!(data->lm75[0])) { + err = -ENOMEM; + goto ERROR_SC_0; + } + memset(data->lm75[0], 0x00, sizeof(struct i2c_client)); + + data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!(data->lm75[1])) { + err = -ENOMEM; + goto ERROR_SC_1; + } + memset(data->lm75[1], 0x00, sizeof(struct i2c_client)); + + id = i2c_adapter_id(adapter); + + if (force_subclients[0] == id && force_subclients[1] == address) { + for (i = 2; i <= 3; i++) { + if (force_subclients[i] < 0x48 || + force_subclients[i] > 0x4f) { + dev_err(&new_client->dev, "invalid subclient " + "address %d; must be 0x48-0x4f\n", + force_subclients[i]); + err = -ENODEV; + goto ERROR_SC_2; + } + } + asb100_write_value(new_client, ASB100_REG_I2C_SUBADDR, + (force_subclients[2] & 0x07) | + ((force_subclients[3] & 0x07) <<4)); + data->lm75[0]->addr = force_subclients[2]; + data->lm75[1]->addr = force_subclients[3]; + } else { + int val = asb100_read_value(new_client, ASB100_REG_I2C_SUBADDR); + data->lm75[0]->addr = 0x48 + (val & 0x07); + data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07); + } + + if(data->lm75[0]->addr == data->lm75[1]->addr) { + dev_err(&new_client->dev, "duplicate addresses 0x%x " + "for subclients\n", data->lm75[0]->addr); + err = -ENODEV; + goto ERROR_SC_2; + } + + for (i = 0; i <= 1; i++) { + i2c_set_clientdata(data->lm75[i], NULL); + data->lm75[i]->adapter = adapter; + data->lm75[i]->driver = &asb100_driver; + data->lm75[i]->flags = 0; + strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE); + } + + if ((err = i2c_attach_client(data->lm75[0]))) { + dev_err(&new_client->dev, "subclient %d registration " + "at address 0x%x failed.\n", i, data->lm75[0]->addr); + goto ERROR_SC_2; + } + + if ((err = i2c_attach_client(data->lm75[1]))) { + dev_err(&new_client->dev, "subclient %d registration " + "at address 0x%x failed.\n", i, data->lm75[1]->addr); + goto ERROR_SC_3; + } + + return 0; + +/* Undo inits in case of errors */ +ERROR_SC_3: + i2c_detach_client(data->lm75[0]); +ERROR_SC_2: + kfree(data->lm75[1]); +ERROR_SC_1: + kfree(data->lm75[0]); +ERROR_SC_0: + return err; +} + +static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int err; + struct i2c_client *new_client; + struct asb100_data *data; + + /* asb100 is SMBus only */ + if (i2c_is_isa_adapter(adapter)) { + pr_debug("asb100.o: detect failed, " + "cannot attach to legacy adapter!\n"); + err = -ENODEV; + goto ERROR0; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + pr_debug("asb100.o: detect failed, " + "smbus byte data not supported!\n"); + err = -ENODEV; + goto ERROR0; + } + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access asb100_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) { + pr_debug("asb100.o: detect failed, kmalloc failed!\n"); + err = -ENOMEM; + goto ERROR0; + } + memset(data, 0, sizeof(struct asb100_data)); + + new_client = &data->client; + init_MUTEX(&data->lock); + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &asb100_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + + /* The chip may be stuck in some other bank than bank 0. This may + make reading other information impossible. Specify a force=... or + force_*=... parameter, and the chip will be reset to the right + bank. */ + if (kind < 0) { + + int val1 = asb100_read_value(new_client, ASB100_REG_BANK); + int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN); + + /* If we're in bank 0 */ + if ( (!(val1 & 0x07)) && + /* Check for ASB100 ID (low byte) */ + ( ((!(val1 & 0x80)) && (val2 != 0x94)) || + /* Check for ASB100 ID (high byte ) */ + ((val1 & 0x80) && (val2 != 0x06)) ) ) { + pr_debug("asb100.o: detect failed, " + "bad chip id 0x%02x!\n", val2); + err = -ENODEV; + goto ERROR1; + } + + } /* kind < 0 */ + + /* We have either had a force parameter, or we have already detected + Winbond. Put it now into bank 0 and Vendor ID High Byte */ + asb100_write_value(new_client, ASB100_REG_BANK, + (asb100_read_value(new_client, ASB100_REG_BANK) & 0x78) | 0x80); + + /* Determine the chip type. */ + if (kind <= 0) { + int val1 = asb100_read_value(new_client, ASB100_REG_WCHIPID); + int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN); + + if ((val1 == 0x31) && (val2 == 0x06)) + kind = asb100; + else { + if (kind == 0) + dev_warn(&new_client->dev, "ignoring " + "'force' parameter for unknown chip " + "at adapter %d, address 0x%02x.\n", + i2c_adapter_id(adapter), address); + err = -ENODEV; + goto ERROR1; + } + } + + /* Fill in remaining client fields and put it into the global list */ + strlcpy(new_client->name, "asb100", I2C_NAME_SIZE); + data->type = kind; + + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR1; + + /* Attach secondary lm75 clients */ + if ((err = asb100_detect_subclients(adapter, address, kind, + new_client))) + goto ERROR2; + + /* Initialize the chip */ + asb100_init_client(new_client); + + /* A few vars need to be filled upon startup */ + data->fan_min[0] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(0)); + data->fan_min[1] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(1)); + data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2)); + + /* Register sysfs hooks */ + device_create_file_in(new_client, 0); + device_create_file_in(new_client, 1); + device_create_file_in(new_client, 2); + device_create_file_in(new_client, 3); + device_create_file_in(new_client, 4); + device_create_file_in(new_client, 5); + device_create_file_in(new_client, 6); + + device_create_file_fan(new_client, 1); + device_create_file_fan(new_client, 2); + device_create_file_fan(new_client, 3); + + device_create_file_temp(new_client, 1); + device_create_file_temp(new_client, 2); + device_create_file_temp(new_client, 3); + device_create_file_temp(new_client, 4); + + device_create_file_vid(new_client); + device_create_file_vrm(new_client); + + device_create_file_alarms(new_client); + + device_create_file_pwm1(new_client); + + return 0; + +ERROR2: + i2c_detach_client(new_client); +ERROR1: + kfree(data); +ERROR0: + return err; +} + +static int asb100_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "client deregistration failed; " + "client not detached.\n"); + return err; + } + + if (i2c_get_clientdata(client)==NULL) { + /* subclients */ + kfree(client); + } else { + /* main client */ + kfree(i2c_get_clientdata(client)); + } + + return 0; +} + +/* The SMBus locks itself, usually, but nothing may access the chip between + bank switches. */ +static int asb100_read_value(struct i2c_client *client, u16 reg) +{ + struct asb100_data *data = i2c_get_clientdata(client); + struct i2c_client *cl; + int res, bank; + + down(&data->lock); + + bank = (reg >> 8) & 0x0f; + if (bank > 2) + /* switch banks */ + i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank); + + if (bank == 0 || bank > 2) { + res = i2c_smbus_read_byte_data(client, reg & 0xff); + } else { + /* switch to subclient */ + cl = data->lm75[bank - 1]; + + /* convert from ISA to LM75 I2C addresses */ + switch (reg & 0xff) { + case 0x50: /* TEMP */ + res = swab16(i2c_smbus_read_word_data (cl, 0)); + break; + case 0x52: /* CONFIG */ + res = i2c_smbus_read_byte_data(cl, 1); + break; + case 0x53: /* HYST */ + res = swab16(i2c_smbus_read_word_data (cl, 2)); + break; + case 0x55: /* MAX */ + default: + res = swab16(i2c_smbus_read_word_data (cl, 3)); + break; + } + } + + if (bank > 2) + i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); + + up(&data->lock); + + return res; +} + +static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value) +{ + struct asb100_data *data = i2c_get_clientdata(client); + struct i2c_client *cl; + int bank; + + down(&data->lock); + + bank = (reg >> 8) & 0x0f; + if (bank > 2) + /* switch banks */ + i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank); + + if (bank == 0 || bank > 2) { + i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff); + } else { + /* switch to subclient */ + cl = data->lm75[bank - 1]; + + /* convert from ISA to LM75 I2C addresses */ + switch (reg & 0xff) { + case 0x52: /* CONFIG */ + i2c_smbus_write_byte_data(cl, 1, value & 0xff); + break; + case 0x53: /* HYST */ + i2c_smbus_write_word_data(cl, 2, swab16(value)); + break; + case 0x55: /* MAX */ + i2c_smbus_write_word_data(cl, 3, swab16(value)); + break; + } + } + + if (bank > 2) + i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); + + up(&data->lock); +} + +static void asb100_init_client(struct i2c_client *client) +{ + struct asb100_data *data = i2c_get_clientdata(client); + int vid = 0; + + vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f; + vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4; + data->vrm = i2c_which_vrm(); + vid = vid_from_reg(vid, data->vrm); + + /* Start monitoring */ + asb100_write_value(client, ASB100_REG_CONFIG, + (asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01); +} + +static struct asb100_data *asb100_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct asb100_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + + dev_dbg(&client->dev, "starting device update...\n"); + + /* 7 voltage inputs */ + for (i = 0; i < 7; i++) { + data->in[i] = asb100_read_value(client, + ASB100_REG_IN(i)); + data->in_min[i] = asb100_read_value(client, + ASB100_REG_IN_MIN(i)); + data->in_max[i] = asb100_read_value(client, + ASB100_REG_IN_MAX(i)); + } + + /* 3 fan inputs */ + for (i = 0; i < 3; i++) { + data->fan[i] = asb100_read_value(client, + ASB100_REG_FAN(i)); + data->fan_min[i] = asb100_read_value(client, + ASB100_REG_FAN_MIN(i)); + } + + /* 4 temperature inputs */ + for (i = 1; i <= 4; i++) { + data->temp[i-1] = asb100_read_value(client, + ASB100_REG_TEMP(i)); + data->temp_max[i-1] = asb100_read_value(client, + ASB100_REG_TEMP_MAX(i)); + data->temp_hyst[i-1] = asb100_read_value(client, + ASB100_REG_TEMP_HYST(i)); + } + + /* VID and fan divisors */ + i = asb100_read_value(client, ASB100_REG_VID_FANDIV); + data->vid = i & 0x0f; + data->vid |= (asb100_read_value(client, + ASB100_REG_CHIPID) & 0x01) << 4; + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = (i >> 6) & 0x03; + data->fan_div[2] = (asb100_read_value(client, + ASB100_REG_PIN) >> 6) & 0x03; + + /* PWM */ + data->pwm = asb100_read_value(client, ASB100_REG_PWM1); + + /* alarms */ + data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) + + (asb100_read_value(client, ASB100_REG_ALARM2) << 8); + + data->last_updated = jiffies; + data->valid = 1; + + dev_dbg(&client->dev, "... device update complete\n"); + } + + up(&data->update_lock); + + return data; +} + +static int __init asb100_init(void) +{ + return i2c_add_driver(&asb100_driver); +} + +static void __exit asb100_exit(void) +{ + i2c_del_driver(&asb100_driver); +} + +MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); +MODULE_DESCRIPTION("ASB100 Bach driver"); +MODULE_LICENSE("GPL"); + +module_init(asb100_init); +module_exit(asb100_exit); + diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c new file mode 100644 index 000000000000..07f16c3fb084 --- /dev/null +++ b/drivers/i2c/chips/ds1337.c @@ -0,0 +1,402 @@ +/* + * linux/drivers/i2c/chips/ds1337.c + * + * Copyright (C) 2005 James Chapman <jchapman@katalix.com> + * + * based on linux/drivers/acron/char/pcf8583.c + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for Dallas Semiconductor DS1337 real time clock chip + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/string.h> +#include <linux/rtc.h> /* get the user-level API */ +#include <linux/bcd.h> +#include <linux/list.h> + +/* Device registers */ +#define DS1337_REG_HOUR 2 +#define DS1337_REG_DAY 3 +#define DS1337_REG_DATE 4 +#define DS1337_REG_MONTH 5 +#define DS1337_REG_CONTROL 14 +#define DS1337_REG_STATUS 15 + +/* FIXME - how do we export these interface constants? */ +#define DS1337_GET_DATE 0 +#define DS1337_SET_DATE 1 + +/* + * Functions declaration + */ +static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +SENSORS_INSMOD_1(ds1337); + +static int ds1337_attach_adapter(struct i2c_adapter *adapter); +static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind); +static void ds1337_init_client(struct i2c_client *client); +static int ds1337_detach_client(struct i2c_client *client); +static int ds1337_command(struct i2c_client *client, unsigned int cmd, + void *arg); + +/* + * Driver data (common to all clients) + */ +static struct i2c_driver ds1337_driver = { + .owner = THIS_MODULE, + .name = "ds1337", + .flags = I2C_DF_NOTIFY, + .attach_adapter = ds1337_attach_adapter, + .detach_client = ds1337_detach_client, + .command = ds1337_command, +}; + +/* + * Client data (each client gets its own) + */ +struct ds1337_data { + struct i2c_client client; + struct list_head list; + int id; +}; + +/* + * Internal variables + */ +static int ds1337_id; +static LIST_HEAD(ds1337_clients); + +static inline int ds1337_read(struct i2c_client *client, u8 reg, u8 *value) +{ + s32 tmp = i2c_smbus_read_byte_data(client, reg); + + if (tmp < 0) + return -EIO; + + *value = tmp; + + return 0; +} + +/* + * Chip access functions + */ +static int ds1337_get_datetime(struct i2c_client *client, struct rtc_time *dt) +{ + struct ds1337_data *data = i2c_get_clientdata(client); + int result; + u8 buf[7]; + u8 val; + struct i2c_msg msg[2]; + u8 offs = 0; + + if (!dt) { + dev_dbg(&client->adapter->dev, "%s: EINVAL: dt=NULL\n", + __FUNCTION__); + + return -EINVAL; + } + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = &offs; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = sizeof(buf); + msg[1].buf = &buf[0]; + + result = client->adapter->algo->master_xfer(client->adapter, + &msg[0], 2); + + dev_dbg(&client->adapter->dev, + "%s: [%d] %02x %02x %02x %02x %02x %02x %02x\n", + __FUNCTION__, result, buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6]); + + if (result >= 0) { + dt->tm_sec = BCD_TO_BIN(buf[0]); + dt->tm_min = BCD_TO_BIN(buf[1]); + val = buf[2] & 0x3f; + dt->tm_hour = BCD_TO_BIN(val); + dt->tm_wday = BCD_TO_BIN(buf[3]) - 1; + dt->tm_mday = BCD_TO_BIN(buf[4]); + val = buf[5] & 0x7f; + dt->tm_mon = BCD_TO_BIN(val); + dt->tm_year = 1900 + BCD_TO_BIN(buf[6]); + if (buf[5] & 0x80) + dt->tm_year += 100; + + dev_dbg(&client->adapter->dev, "%s: secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, dt->tm_sec, dt->tm_min, + dt->tm_hour, dt->tm_mday, + dt->tm_mon, dt->tm_year, dt->tm_wday); + } else { + dev_err(&client->adapter->dev, "ds1337[%d]: error reading " + "data! %d\n", data->id, result); + result = -EIO; + } + + return result; +} + +static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt) +{ + struct ds1337_data *data = i2c_get_clientdata(client); + int result; + u8 buf[8]; + u8 val; + struct i2c_msg msg[1]; + + if (!dt) { + dev_dbg(&client->adapter->dev, "%s: EINVAL: dt=NULL\n", + __FUNCTION__); + + return -EINVAL; + } + + dev_dbg(&client->adapter->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", __FUNCTION__, + dt->tm_sec, dt->tm_min, dt->tm_hour, + dt->tm_mday, dt->tm_mon, dt->tm_year, dt->tm_wday); + + buf[0] = 0; /* reg offset */ + buf[1] = BIN_TO_BCD(dt->tm_sec); + buf[2] = BIN_TO_BCD(dt->tm_min); + buf[3] = BIN_TO_BCD(dt->tm_hour) | (1 << 6); + buf[4] = BIN_TO_BCD(dt->tm_wday) + 1; + buf[5] = BIN_TO_BCD(dt->tm_mday); + buf[6] = BIN_TO_BCD(dt->tm_mon); + if (dt->tm_year >= 2000) { + val = dt->tm_year - 2000; + buf[6] |= (1 << 7); + } else { + val = dt->tm_year - 1900; + } + buf[7] = BIN_TO_BCD(val); + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = sizeof(buf); + msg[0].buf = &buf[0]; + + result = client->adapter->algo->master_xfer(client->adapter, + &msg[0], 1); + if (result < 0) { + dev_err(&client->adapter->dev, "ds1337[%d]: error " + "writing data! %d\n", data->id, result); + result = -EIO; + } else { + result = 0; + } + + return result; +} + +static int ds1337_command(struct i2c_client *client, unsigned int cmd, + void *arg) +{ + dev_dbg(&client->adapter->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); + + switch (cmd) { + case DS1337_GET_DATE: + return ds1337_get_datetime(client, arg); + + case DS1337_SET_DATE: + return ds1337_set_datetime(client, arg); + + default: + return -EINVAL; + } +} + +/* + * Public API for access to specific device. Useful for low-level + * RTC access from kernel code. + */ +int ds1337_do_command(int id, int cmd, void *arg) +{ + struct list_head *walk; + struct list_head *tmp; + struct ds1337_data *data; + + list_for_each_safe(walk, tmp, &ds1337_clients) { + data = list_entry(walk, struct ds1337_data, list); + if (data->id == id) + return ds1337_command(&data->client, cmd, arg); + } + + return -ENODEV; +} + +static int ds1337_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, ds1337_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct ds1337_data *data; + int err = 0; + const char *name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_I2C)) + goto exit; + + if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct ds1337_data)); + INIT_LIST_HEAD(&data->list); + + /* The common I2C client data is placed right before the + * DS1337-specific data. + */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &ds1337_driver; + new_client->flags = 0; + + /* + * Now we do the remaining detection. A negative kind means that + * the driver was loaded with no force parameter (default), so we + * must both detect and identify the chip. A zero kind means that + * the driver was loaded with the force parameter, the detection + * step shall be skipped. A positive kind means that the driver + * was loaded with the force parameter and a given kind of chip is + * requested, so both the detection and the identification steps + * are skipped. + * + * For detection, we read registers that are most likely to cause + * detection failure, i.e. those that have more bits with fixed + * or reserved values. + */ + + /* Default to an DS1337 if forced */ + if (kind == 0) + kind = ds1337; + + if (kind < 0) { /* detection and identification */ + u8 data; + + /* Check that status register bits 6-2 are zero */ + if ((ds1337_read(new_client, DS1337_REG_STATUS, &data) < 0) || + (data & 0x7c)) + goto exit_free; + + /* Check for a valid day register value */ + if ((ds1337_read(new_client, DS1337_REG_DAY, &data) < 0) || + (data == 0) || (data & 0xf8)) + goto exit_free; + + /* Check for a valid date register value */ + if ((ds1337_read(new_client, DS1337_REG_DATE, &data) < 0) || + (data == 0) || (data & 0xc0) || ((data & 0x0f) > 9) || + (data >= 0x32)) + goto exit_free; + + /* Check for a valid month register value */ + if ((ds1337_read(new_client, DS1337_REG_MONTH, &data) < 0) || + (data == 0) || (data & 0x60) || ((data & 0x0f) > 9) || + ((data >= 0x13) && (data <= 0x19))) + goto exit_free; + + /* Check that control register bits 6-5 are zero */ + if ((ds1337_read(new_client, DS1337_REG_CONTROL, &data) < 0) || + (data & 0x60)) + goto exit_free; + + kind = ds1337; + } + + if (kind == ds1337) + name = "ds1337"; + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the DS1337 chip */ + ds1337_init_client(new_client); + + /* Add client to local list */ + data->id = ds1337_id++; + list_add(&data->list, &ds1337_clients); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static void ds1337_init_client(struct i2c_client *client) +{ + s32 val; + + /* Ensure that device is set in 24-hour mode */ + val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR); + if ((val >= 0) && (val & (1 << 6)) == 0) + i2c_smbus_write_byte_data(client, DS1337_REG_HOUR, + val | (1 << 6)); +} + +static int ds1337_detach_client(struct i2c_client *client) +{ + int err; + struct ds1337_data *data = i2c_get_clientdata(client); + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + list_del(&data->list); + kfree(data); + return 0; +} + +static int __init ds1337_init(void) +{ + return i2c_add_driver(&ds1337_driver); +} + +static void __exit ds1337_exit(void) +{ + i2c_del_driver(&ds1337_driver); +} + +MODULE_AUTHOR("James Chapman <jchapman@katalix.com>"); +MODULE_DESCRIPTION("DS1337 RTC driver"); +MODULE_LICENSE("GPL"); + +module_init(ds1337_init); +module_exit(ds1337_exit); diff --git a/drivers/i2c/chips/ds1621.c b/drivers/i2c/chips/ds1621.c new file mode 100644 index 000000000000..bb1fefb2162e --- /dev/null +++ b/drivers/i2c/chips/ds1621.c @@ -0,0 +1,341 @@ +/* + ds1621.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23 + based on lm75.c by Frodo Looijaard <frodol@dds.nl> + Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with + the help of Jean Delvare <khali@linux-fr.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include "lm75.h" + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, + 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(ds1621); +static int polarity = -1; +module_param(polarity, int, 0); +MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low"); + +/* Many DS1621 constants specified below */ +/* Config register used for detection */ +/* 7 6 5 4 3 2 1 0 */ +/* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */ +#define DS1621_REG_CONFIG_NVB 0x10 +#define DS1621_REG_CONFIG_POLARITY 0x02 +#define DS1621_REG_CONFIG_1SHOT 0x01 +#define DS1621_REG_CONFIG_DONE 0x80 + +/* The DS1621 registers */ +#define DS1621_REG_TEMP 0xAA /* word, RO */ +#define DS1621_REG_TEMP_MIN 0xA1 /* word, RW */ +#define DS1621_REG_TEMP_MAX 0xA2 /* word, RW */ +#define DS1621_REG_CONF 0xAC /* byte, RW */ +#define DS1621_COM_START 0xEE /* no data */ +#define DS1621_COM_STOP 0x22 /* no data */ + +/* The DS1621 configuration register */ +#define DS1621_ALARM_TEMP_HIGH 0x40 +#define DS1621_ALARM_TEMP_LOW 0x20 + +/* Conversions. Rounding and limit checking is only done on the TO_REG + variants. Note that you should be a bit careful with which arguments + these macros are called: arguments may be evaluated more than once. + Fixing this is just not worth it. */ +#define ALARMS_FROM_REG(val) ((val) & \ + (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW)) + +/* Each client has this additional data */ +struct ds1621_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u16 temp, temp_min, temp_max; /* Register values, word */ + u8 conf; /* Register encoding, combined */ +}; + +static int ds1621_attach_adapter(struct i2c_adapter *adapter); +static int ds1621_detect(struct i2c_adapter *adapter, int address, + int kind); +static void ds1621_init_client(struct i2c_client *client); +static int ds1621_detach_client(struct i2c_client *client); +static struct ds1621_data *ds1621_update_client(struct device *dev); + +/* This is the driver that will be inserted */ +static struct i2c_driver ds1621_driver = { + .owner = THIS_MODULE, + .name = "ds1621", + .id = I2C_DRIVERID_DS1621, + .flags = I2C_DF_NOTIFY, + .attach_adapter = ds1621_attach_adapter, + .detach_client = ds1621_detach_client, +}; + +/* All registers are word-sized, except for the configuration register. + DS1621 uses a high-byte first convention, which is exactly opposite to + the usual practice. */ +static int ds1621_read_value(struct i2c_client *client, u8 reg) +{ + if (reg == DS1621_REG_CONF) + return i2c_smbus_read_byte_data(client, reg); + else + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +/* All registers are word-sized, except for the configuration register. + DS1621 uses a high-byte first convention, which is exactly opposite to + the usual practice. */ +static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if (reg == DS1621_REG_CONF) + return i2c_smbus_write_byte_data(client, reg, value); + else + return i2c_smbus_write_word_data(client, reg, swab16(value)); +} + +static void ds1621_init_client(struct i2c_client *client) +{ + int reg = ds1621_read_value(client, DS1621_REG_CONF); + /* switch to continous conversion mode */ + reg &= ~ DS1621_REG_CONFIG_1SHOT; + + /* setup output polarity */ + if (polarity == 0) + reg &= ~DS1621_REG_CONFIG_POLARITY; + else if (polarity == 1) + reg |= DS1621_REG_CONFIG_POLARITY; + + ds1621_write_value(client, DS1621_REG_CONF, reg); + + /* start conversion */ + i2c_smbus_write_byte(client, DS1621_COM_START); +} + +#define show(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct ds1621_data *data = ds1621_update_client(dev); \ + return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \ +} + +show(temp); +show(temp_min); +show(temp_max); + +#define set_temp(suffix, value, reg) \ +static ssize_t set_temp_##suffix(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct ds1621_data *data = ds1621_update_client(dev); \ + u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \ + \ + down(&data->update_lock); \ + data->value = val; \ + ds1621_write_value(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} + +set_temp(min, temp_min, DS1621_REG_TEMP_MIN); +set_temp(max, temp_max, DS1621_REG_TEMP_MAX); + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct ds1621_data *data = ds1621_update_client(dev); + return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf)); +} + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL); +static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); + + +static int ds1621_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, ds1621_detect); +} + +/* This function is called by i2c_detect */ +int ds1621_detect(struct i2c_adapter *adapter, int address, + int kind) +{ + int conf, temp; + struct i2c_client *new_client; + struct ds1621_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA + | I2C_FUNC_SMBUS_WRITE_BYTE)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access ds1621_{read,write}_value. */ + if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct ds1621_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &ds1621_driver; + new_client->flags = 0; + + + /* Now, we do the remaining detection. It is lousy. */ + if (kind < 0) { + /* The NVB bit should be low if no EEPROM write has been + requested during the latest 10ms, which is highly + improbable in our case. */ + conf = ds1621_read_value(new_client, DS1621_REG_CONF); + if (conf & DS1621_REG_CONFIG_NVB) + goto exit_free; + /* The 7 lowest bits of a temperature should always be 0. */ + temp = ds1621_read_value(new_client, DS1621_REG_TEMP); + if (temp & 0x007f) + goto exit_free; + temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN); + if (temp & 0x007f) + goto exit_free; + temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX); + if (temp & 0x007f) + goto exit_free; + } + + /* Determine the chip type - only one kind supported! */ + if (kind <= 0) + kind = ds1621; + + /* Fill in remaining client fields and put it into the global list */ + strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the DS1621 chip */ + ds1621_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + + return 0; + +/* OK, this is not exactly good programming practice, usually. But it is + very code-efficient in this case. */ + exit_free: + kfree(data); + exit: + return err; +} + +static int ds1621_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + + return 0; +} + + +static struct ds1621_data *ds1621_update_client(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ds1621_data *data = i2c_get_clientdata(client); + u8 new_conf; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + + dev_dbg(&client->dev, "Starting ds1621 update\n"); + + data->conf = ds1621_read_value(client, DS1621_REG_CONF); + + data->temp = ds1621_read_value(client, DS1621_REG_TEMP); + + data->temp_min = ds1621_read_value(client, + DS1621_REG_TEMP_MIN); + data->temp_max = ds1621_read_value(client, + DS1621_REG_TEMP_MAX); + + /* reset alarms if neccessary */ + new_conf = data->conf; + if (data->temp < data->temp_min) + new_conf &= ~DS1621_ALARM_TEMP_LOW; + if (data->temp > data->temp_max) + new_conf &= ~DS1621_ALARM_TEMP_HIGH; + if (data->conf != new_conf) + ds1621_write_value(client, DS1621_REG_CONF, + new_conf); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init ds1621_init(void) +{ + return i2c_add_driver(&ds1621_driver); +} + +static void __exit ds1621_exit(void) +{ + i2c_del_driver(&ds1621_driver); +} + + +MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>"); +MODULE_DESCRIPTION("DS1621 driver"); +MODULE_LICENSE("GPL"); + +module_init(ds1621_init); +module_exit(ds1621_exit); diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c new file mode 100644 index 000000000000..cbdfa2db6f7c --- /dev/null +++ b/drivers/i2c/chips/eeprom.c @@ -0,0 +1,264 @@ +/* + eeprom.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and + Philip Edelbrock <phil@netroedge.com> + Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com> + Copyright (C) 2003 IBM Corp. + + 2004-01-16 Jean Delvare <khali@linux-fr.org> + Divide the eeprom in 32-byte (arbitrary) slices. This significantly + speeds sensors up, as well as various scripts using the eeprom + module. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(eeprom); + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +/* possible types of eeprom devices */ +enum eeprom_nature { + UNKNOWN, + VAIO, +}; + +/* Each client has this additional data */ +struct eeprom_data { + struct i2c_client client; + struct semaphore update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[8]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ + enum eeprom_nature nature; +}; + + +static int eeprom_attach_adapter(struct i2c_adapter *adapter); +static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind); +static int eeprom_detach_client(struct i2c_client *client); + +/* This is the driver that will be inserted */ +static struct i2c_driver eeprom_driver = { + .owner = THIS_MODULE, + .name = "eeprom", + .id = I2C_DRIVERID_EEPROM, + .flags = I2C_DF_NOTIFY, + .attach_adapter = eeprom_attach_adapter, + .detach_client = eeprom_detach_client, +}; + +static void eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + + down(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX) + if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX) + goto exit; + } else { + if (i2c_smbus_write_byte(client, slice << 5)) { + dev_dbg(&client->dev, "eeprom read start has failed!\n"); + goto exit; + } + for (i = slice << 5; i < (slice + 1) << 5; i++) { + j = i2c_smbus_read_byte(client); + if (j < 0) + goto exit; + data->data[i] = (u8) j; + } + } + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + up(&data->update_lock); +} + +static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) + return 0; + if (off + count > EEPROM_SIZE) + count = EEPROM_SIZE - off; + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++) + eeprom_update_client(client, slice); + + /* Hide Vaio security settings to regular users (16 first bytes) */ + if (data->nature == VAIO && off < 16 && !capable(CAP_SYS_ADMIN)) { + size_t in_row1 = 16 - off; + in_row1 = min(in_row1, count); + memset(buf, 0, in_row1); + if (count - in_row1 > 0) + memcpy(buf + in_row1, &data->data[16], count - in_row1); + } else { + memcpy(buf, &data->data[off], count); + } + + return count; +} + +static struct bin_attribute eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + .owner = THIS_MODULE, + }, + .size = EEPROM_SIZE, + .read = eeprom_read, +}; + +static int eeprom_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, eeprom_detect); +} + +/* This function is called by i2c_detect */ +int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct eeprom_data *data; + int err = 0; + + /* There are three ways we can read the EEPROM data: + (1) I2C block reads (faster, but unsupported by most adapters) + (2) Consecutive byte reads (100% overhead) + (3) Regular byte data reads (200% overhead) + The third method is not implemented by this driver because all + known adapters support at least the second. */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA + | I2C_FUNC_SMBUS_BYTE)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access eeprom_{read,write}_value. */ + if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct eeprom_data)); + + new_client = &data->client; + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &eeprom_driver; + new_client->flags = 0; + + /* prevent 24RF08 corruption */ + i2c_smbus_write_quick(new_client, 0); + + /* Fill in the remaining client fields */ + strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + data->nature = UNKNOWN; + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_kfree; + + /* Detect the Vaio nature of EEPROMs. + We use the "PCG-" prefix as the signature. */ + if (address == 0x57) { + if (i2c_smbus_read_byte_data(new_client, 0x80) == 'P' + && i2c_smbus_read_byte(new_client) == 'C' + && i2c_smbus_read_byte(new_client) == 'G' + && i2c_smbus_read_byte(new_client) == '-') { + dev_info(&new_client->dev, "Vaio EEPROM detected, " + "enabling password protection\n"); + data->nature = VAIO; + } + } + + /* create the sysfs eeprom file */ + sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr); + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int eeprom_detach_client(struct i2c_client *client) +{ + int err; + + err = i2c_detach_client(client); + if (err) { + dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static int __init eeprom_init(void) +{ + return i2c_add_driver(&eeprom_driver); +} + +static void __exit eeprom_exit(void) +{ + i2c_del_driver(&eeprom_driver); +} + + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " + "Philip Edelbrock <phil@netroedge.com> and " + "Greg Kroah-Hartman <greg@kroah.com>"); +MODULE_DESCRIPTION("I2C EEPROM driver"); +MODULE_LICENSE("GPL"); + +module_init(eeprom_init); +module_exit(eeprom_exit); diff --git a/drivers/i2c/chips/fscher.c b/drivers/i2c/chips/fscher.c new file mode 100644 index 000000000000..18e33ac59d0c --- /dev/null +++ b/drivers/i2c/chips/fscher.c @@ -0,0 +1,692 @@ +/* + * fscher.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * fujitsu siemens hermes chip, + * module based on fscpos.c + * Copyright (C) 2000 Hermann Jung <hej@odn.de> + * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + * and Philip Edelbrock <phil@netroedge.com> + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* + * Addresses to scan + */ + +static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(fscher); + +/* + * The FSCHER registers + */ + +/* chip identification */ +#define FSCHER_REG_IDENT_0 0x00 +#define FSCHER_REG_IDENT_1 0x01 +#define FSCHER_REG_IDENT_2 0x02 +#define FSCHER_REG_REVISION 0x03 + +/* global control and status */ +#define FSCHER_REG_EVENT_STATE 0x04 +#define FSCHER_REG_CONTROL 0x05 + +/* watchdog */ +#define FSCHER_REG_WDOG_PRESET 0x28 +#define FSCHER_REG_WDOG_STATE 0x23 +#define FSCHER_REG_WDOG_CONTROL 0x21 + +/* fan 0 */ +#define FSCHER_REG_FAN0_MIN 0x55 +#define FSCHER_REG_FAN0_ACT 0x0e +#define FSCHER_REG_FAN0_STATE 0x0d +#define FSCHER_REG_FAN0_RIPPLE 0x0f + +/* fan 1 */ +#define FSCHER_REG_FAN1_MIN 0x65 +#define FSCHER_REG_FAN1_ACT 0x6b +#define FSCHER_REG_FAN1_STATE 0x62 +#define FSCHER_REG_FAN1_RIPPLE 0x6f + +/* fan 2 */ +#define FSCHER_REG_FAN2_MIN 0xb5 +#define FSCHER_REG_FAN2_ACT 0xbb +#define FSCHER_REG_FAN2_STATE 0xb2 +#define FSCHER_REG_FAN2_RIPPLE 0xbf + +/* voltage supervision */ +#define FSCHER_REG_VOLT_12 0x45 +#define FSCHER_REG_VOLT_5 0x42 +#define FSCHER_REG_VOLT_BATT 0x48 + +/* temperature 0 */ +#define FSCHER_REG_TEMP0_ACT 0x64 +#define FSCHER_REG_TEMP0_STATE 0x71 + +/* temperature 1 */ +#define FSCHER_REG_TEMP1_ACT 0x32 +#define FSCHER_REG_TEMP1_STATE 0x81 + +/* temperature 2 */ +#define FSCHER_REG_TEMP2_ACT 0x35 +#define FSCHER_REG_TEMP2_STATE 0x91 + +/* + * Functions declaration + */ + +static int fscher_attach_adapter(struct i2c_adapter *adapter); +static int fscher_detect(struct i2c_adapter *adapter, int address, int kind); +static int fscher_detach_client(struct i2c_client *client); +static struct fscher_data *fscher_update_device(struct device *dev); +static void fscher_init_client(struct i2c_client *client); + +static int fscher_read_value(struct i2c_client *client, u8 reg); +static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver fscher_driver = { + .owner = THIS_MODULE, + .name = "fscher", + .id = I2C_DRIVERID_FSCHER, + .flags = I2C_DF_NOTIFY, + .attach_adapter = fscher_attach_adapter, + .detach_client = fscher_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct fscher_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + u8 revision; /* revision of chip */ + u8 global_event; /* global event status */ + u8 global_control; /* global control register */ + u8 watchdog[3]; /* watchdog */ + u8 volt[3]; /* 12, 5, battery voltage */ + u8 temp_act[3]; /* temperature */ + u8 temp_status[3]; /* status of sensor */ + u8 fan_act[3]; /* fans revolutions per second */ + u8 fan_status[3]; /* fan status */ + u8 fan_min[3]; /* fan min value for rps */ + u8 fan_ripple[3]; /* divider for rps */ +}; + +/* + * Sysfs stuff + */ + +#define sysfs_r(kind, sub, offset, reg) \ +static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \ +static ssize_t show_##kind##offset##sub (struct device *, char *); \ +static ssize_t show_##kind##offset##sub (struct device *dev, char *buf) \ +{ \ + struct fscher_data *data = fscher_update_device(dev); \ + return show_##kind##sub(data, buf, (offset)); \ +} + +#define sysfs_w(kind, sub, offset, reg) \ +static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \ +static ssize_t set_##kind##offset##sub (struct device *, const char *, size_t); \ +static ssize_t set_##kind##offset##sub (struct device *dev, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct fscher_data *data = i2c_get_clientdata(client); \ + return set_##kind##sub(client, data, buf, count, (offset), reg); \ +} + +#define sysfs_rw_n(kind, sub, offset, reg) \ +sysfs_r(kind, sub, offset, reg) \ +sysfs_w(kind, sub, offset, reg) \ +static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub); + +#define sysfs_rw(kind, sub, reg) \ +sysfs_r(kind, sub, 0, reg) \ +sysfs_w(kind, sub, 0, reg) \ +static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub); + +#define sysfs_ro_n(kind, sub, offset, reg) \ +sysfs_r(kind, sub, offset, reg) \ +static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL); + +#define sysfs_ro(kind, sub, reg) \ +sysfs_r(kind, sub, 0, reg) \ +static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL); + +#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \ +sysfs_rw_n(pwm, , offset, reg_min) \ +sysfs_rw_n(fan, _status, offset, reg_status) \ +sysfs_rw_n(fan, _div , offset, reg_ripple) \ +sysfs_ro_n(fan, _input , offset, reg_act) + +#define sysfs_temp(offset, reg_status, reg_act) \ +sysfs_rw_n(temp, _status, offset, reg_status) \ +sysfs_ro_n(temp, _input , offset, reg_act) + +#define sysfs_in(offset, reg_act) \ +sysfs_ro_n(in, _input, offset, reg_act) + +#define sysfs_revision(reg_revision) \ +sysfs_ro(revision, , reg_revision) + +#define sysfs_alarms(reg_events) \ +sysfs_ro(alarms, , reg_events) + +#define sysfs_control(reg_control) \ +sysfs_rw(control, , reg_control) + +#define sysfs_watchdog(reg_control, reg_status, reg_preset) \ +sysfs_rw(watchdog, _control, reg_control) \ +sysfs_rw(watchdog, _status , reg_status) \ +sysfs_rw(watchdog, _preset , reg_preset) + +sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN, + FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT) +sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN, + FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT) +sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN, + FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT) + +sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT) +sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT) +sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT) + +sysfs_in(0, FSCHER_REG_VOLT_12) +sysfs_in(1, FSCHER_REG_VOLT_5) +sysfs_in(2, FSCHER_REG_VOLT_BATT) + +sysfs_revision(FSCHER_REG_REVISION) +sysfs_alarms(FSCHER_REG_EVENTS) +sysfs_control(FSCHER_REG_CONTROL) +sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET) + +#define device_create_file_fan(client, offset) \ +do { \ + device_create_file(&client->dev, &dev_attr_fan##offset##_status); \ + device_create_file(&client->dev, &dev_attr_pwm##offset); \ + device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ + device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ +} while (0) + +#define device_create_file_temp(client, offset) \ +do { \ + device_create_file(&client->dev, &dev_attr_temp##offset##_status); \ + device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ +} while (0) + +#define device_create_file_in(client, offset) \ +do { \ + device_create_file(&client->dev, &dev_attr_in##offset##_input); \ +} while (0) + +#define device_create_file_revision(client) \ +do { \ + device_create_file(&client->dev, &dev_attr_revision); \ +} while (0) + +#define device_create_file_alarms(client) \ +do { \ + device_create_file(&client->dev, &dev_attr_alarms); \ +} while (0) + +#define device_create_file_control(client) \ +do { \ + device_create_file(&client->dev, &dev_attr_control); \ +} while (0) + +#define device_create_file_watchdog(client) \ +do { \ + device_create_file(&client->dev, &dev_attr_watchdog_status); \ + device_create_file(&client->dev, &dev_attr_watchdog_control); \ + device_create_file(&client->dev, &dev_attr_watchdog_preset); \ +} while (0) + +/* + * Real code + */ + +static int fscher_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, fscher_detect); +} + +static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct fscher_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + * client structure, even though we cannot fill it completely yet. + * But it allows us to access i2c_smbus_read_byte_data. */ + if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct fscher_data)); + + /* The common I2C client data is placed right before the + * Hermes-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &fscher_driver; + new_client->flags = 0; + + /* Do the remaining detection unless force or force_fscher parameter */ + if (kind < 0) { + if ((i2c_smbus_read_byte_data(new_client, + FSCHER_REG_IDENT_0) != 0x48) /* 'H' */ + || (i2c_smbus_read_byte_data(new_client, + FSCHER_REG_IDENT_1) != 0x45) /* 'E' */ + || (i2c_smbus_read_byte_data(new_client, + FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */ + goto exit_free; + } + + /* Fill in the remaining client fields and put it into the + * global list */ + strlcpy(new_client->name, "fscher", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + fscher_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file_revision(new_client); + device_create_file_alarms(new_client); + device_create_file_control(new_client); + device_create_file_watchdog(new_client); + + device_create_file_in(new_client, 0); + device_create_file_in(new_client, 1); + device_create_file_in(new_client, 2); + + device_create_file_fan(new_client, 1); + device_create_file_fan(new_client, 2); + device_create_file_fan(new_client, 3); + + device_create_file_temp(new_client, 1); + device_create_file_temp(new_client, 2); + device_create_file_temp(new_client, 3); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int fscher_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static int fscher_read_value(struct i2c_client *client, u8 reg) +{ + dev_dbg(&client->dev, "read reg 0x%02x\n", reg); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n", + reg, value); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* Called when we have found a new FSC Hermes. */ +static void fscher_init_client(struct i2c_client *client) +{ + struct fscher_data *data = i2c_get_clientdata(client); + + /* Read revision from chip */ + data->revision = fscher_read_value(client, FSCHER_REG_REVISION); +} + +static struct fscher_data *fscher_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct fscher_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { + + dev_dbg(&client->dev, "Starting fscher update\n"); + + data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT); + data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT); + data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT); + data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE); + data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE); + data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE); + + data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12); + data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5); + data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT); + + data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT); + data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT); + data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT); + data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE); + data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE); + data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE); + data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN); + data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN); + data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN); + data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE); + data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE); + data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE); + + data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET); + data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE); + data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL); + + data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + + + +#define FAN_INDEX_FROM_NUM(nr) ((nr) - 1) + +static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data, + const char *buf, size_t count, int nr, int reg) +{ + /* bits 0..1, 3..7 reserved => mask with 0x04 */ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04; + + down(&data->update_lock); + data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v; + fscher_write_value(client, reg, v); + up(&data->update_lock); + return count; +} + +static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr) +{ + /* bits 0..1, 3..7 reserved => mask with 0x04 */ + return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04); +} + +static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data, + const char *buf, size_t count, int nr, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v; + fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]); + up(&data->update_lock); + return count; +} + +static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr) +{ + return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]); +} + +static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data, + const char *buf, size_t count, int nr, int reg) +{ + /* supported values: 2, 4, 8 */ + unsigned long v = simple_strtoul(buf, NULL, 10); + + switch (v) { + case 2: v = 1; break; + case 4: v = 2; break; + case 8: v = 3; break; + default: + dev_err(&client->dev, "fan_div value %ld not " + "supported. Choose one of 2, 4 or 8!\n", v); + return -EINVAL; + } + + down(&data->update_lock); + + /* bits 2..7 reserved => mask with 0x03 */ + data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03; + data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v; + + fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]); + up(&data->update_lock); + return count; +} + +static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr) +{ + /* bits 2..7 reserved => mask with 0x03 */ + return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03)); +} + +#define RPM_FROM_REG(val) (val*60) + +static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr) +{ + return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)])); +} + + + +#define TEMP_INDEX_FROM_NUM(nr) ((nr) - 1) + +static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data, + const char *buf, size_t count, int nr, int reg) +{ + /* bits 2..7 reserved, 0 read only => mask with 0x02 */ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; + + down(&data->update_lock); + data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v; + fscher_write_value(client, reg, v); + up(&data->update_lock); + return count; +} + +static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr) +{ + /* bits 2..7 reserved => mask with 0x03 */ + return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03); +} + +#define TEMP_FROM_REG(val) (((val) - 128) * 1000) + +static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr) +{ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)])); +} + +/* + * The final conversion is specified in sensors.conf, as it depends on + * mainboard specific values. We export the registers contents as + * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much + * sense per se, but it minimizes the conversions count and keeps the + * values within a usual range. + */ +#define VOLT_FROM_REG(val) ((val) * 10) + +static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr) +{ + return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr])); +} + + + +static ssize_t show_revision(struct fscher_data *data, char *buf, int nr) +{ + return sprintf(buf, "%u\n", data->revision); +} + + + +static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr) +{ + /* bits 2, 5..6 reserved => mask with 0x9b */ + return sprintf(buf, "%u\n", data->global_event & 0x9b); +} + + + +static ssize_t set_control(struct i2c_client *client, struct fscher_data *data, + const char *buf, size_t count, int nr, int reg) +{ + /* bits 1..7 reserved => mask with 0x01 */ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01; + + down(&data->update_lock); + data->global_control &= ~v; + fscher_write_value(client, reg, v); + up(&data->update_lock); + return count; +} + +static ssize_t show_control(struct fscher_data *data, char *buf, int nr) +{ + /* bits 1..7 reserved => mask with 0x01 */ + return sprintf(buf, "%u\n", data->global_control & 0x01); +} + + + +static ssize_t set_watchdog_control(struct i2c_client *client, struct + fscher_data *data, const char *buf, size_t count, + int nr, int reg) +{ + /* bits 0..3 reserved => mask with 0xf0 */ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; + + down(&data->update_lock); + data->watchdog[2] &= ~0xf0; + data->watchdog[2] |= v; + fscher_write_value(client, reg, data->watchdog[2]); + up(&data->update_lock); + return count; +} + +static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr) +{ + /* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */ + return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0); +} + +static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data, + const char *buf, size_t count, int nr, int reg) +{ + /* bits 0, 2..7 reserved => mask with 0x02 */ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; + + down(&data->update_lock); + data->watchdog[1] &= ~v; + fscher_write_value(client, reg, v); + up(&data->update_lock); + return count; +} + +static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr) +{ + /* bits 0, 2..7 reserved => mask with 0x02 */ + return sprintf(buf, "%u\n", data->watchdog[1] & 0x02); +} + +static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data, + const char *buf, size_t count, int nr, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; + + down(&data->update_lock); + data->watchdog[0] = v; + fscher_write_value(client, reg, data->watchdog[0]); + up(&data->update_lock); + return count; +} + +static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr) +{ + return sprintf(buf, "%u\n", data->watchdog[0]); +} + +static int __init sensors_fscher_init(void) +{ + return i2c_add_driver(&fscher_driver); +} + +static void __exit sensors_fscher_exit(void) +{ + i2c_del_driver(&fscher_driver); +} + +MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>"); +MODULE_DESCRIPTION("FSC Hermes driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_fscher_init); +module_exit(sensors_fscher_exit); diff --git a/drivers/i2c/chips/fscpos.c b/drivers/i2c/chips/fscpos.c new file mode 100644 index 000000000000..2cac79145c75 --- /dev/null +++ b/drivers/i2c/chips/fscpos.c @@ -0,0 +1,641 @@ +/* + fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips + Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + fujitsu siemens poseidon chip, + module based on the old fscpos module by Hermann Jung <hej@odn.de> and + the fscher module by Reinhard Nissl <rnissl@gmx.de> + + original module based on lm80.c + Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + and Philip Edelbrock <phil@netroedge.com> + + Thanks to Jean Delvare for reviewing my code and suggesting a lot of + improvements. +*/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/init.h> + +/* + * Addresses to scan + */ +static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ +SENSORS_INSMOD_1(fscpos); + +/* + * The FSCPOS registers + */ + +/* chip identification */ +#define FSCPOS_REG_IDENT_0 0x00 +#define FSCPOS_REG_IDENT_1 0x01 +#define FSCPOS_REG_IDENT_2 0x02 +#define FSCPOS_REG_REVISION 0x03 + +/* global control and status */ +#define FSCPOS_REG_EVENT_STATE 0x04 +#define FSCPOS_REG_CONTROL 0x05 + +/* watchdog */ +#define FSCPOS_REG_WDOG_PRESET 0x28 +#define FSCPOS_REG_WDOG_STATE 0x23 +#define FSCPOS_REG_WDOG_CONTROL 0x21 + +/* voltages */ +#define FSCPOS_REG_VOLT_12 0x45 +#define FSCPOS_REG_VOLT_5 0x42 +#define FSCPOS_REG_VOLT_BATT 0x48 + +/* fans - the chip does not support minimum speed for fan2 */ +static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 }; +static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab }; +static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 }; +static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf }; + +/* temperatures */ +static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 }; +static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; + +/* + * Functions declaration + */ +static int fscpos_attach_adapter(struct i2c_adapter *adapter); +static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind); +static int fscpos_detach_client(struct i2c_client *client); + +static int fscpos_read_value(struct i2c_client *client, u8 register); +static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value); +static struct fscpos_data *fscpos_update_device(struct device *dev); +static void fscpos_init_client(struct i2c_client *client); + +static void reset_fan_alarm(struct i2c_client *client, int nr); + +/* + * Driver data (common to all clients) + */ +static struct i2c_driver fscpos_driver = { + .owner = THIS_MODULE, + .name = "fscpos", + .id = I2C_DRIVERID_FSCPOS, + .flags = I2C_DF_NOTIFY, + .attach_adapter = fscpos_attach_adapter, + .detach_client = fscpos_detach_client, +}; + +/* + * Client data (each client gets its own) + */ +struct fscpos_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* 0 until following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* register values */ + u8 revision; /* revision of chip */ + u8 global_event; /* global event status */ + u8 global_control; /* global control register */ + u8 wdog_control; /* watchdog control */ + u8 wdog_state; /* watchdog status */ + u8 wdog_preset; /* watchdog preset */ + u8 volt[3]; /* 12, 5, battery current */ + u8 temp_act[3]; /* temperature */ + u8 temp_status[3]; /* status of sensor */ + u8 fan_act[3]; /* fans revolutions per second */ + u8 fan_status[3]; /* fan status */ + u8 pwm[2]; /* fan min value for rps */ + u8 fan_ripple[3]; /* divider for rps */ +}; + +/* Temperature */ +#define TEMP_FROM_REG(val) (((val) - 128) * 1000) + +static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr) +{ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1])); +} + +static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr) +{ + /* bits 2..7 reserved => mask with 0x03 */ + return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03); +} + +static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr) +{ + return sprintf(buf, "1\n"); +} + +static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data + *data, const char *buf, size_t count, int nr, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10); + if (v != 1) { + dev_err(&client->dev, "temp_reset value %ld not supported. " + "Use 1 to reset the alarm!\n", v); + return -EINVAL; + } + + dev_info(&client->dev, "You used the temp_reset feature which has not " + "been proplerly tested. Please report your " + "experience to the module author.\n"); + + /* Supported value: 2 (clears the status) */ + fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr], 2); + return count; +} + +/* Fans */ +#define RPM_FROM_REG(val) ((val) * 60) + +static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr) +{ + /* bits 0..1, 3..7 reserved => mask with 0x04 */ + return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04); +} + +static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr) +{ + return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1])); +} + +static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr) +{ + /* bits 2..7 reserved => mask with 0x03 */ + return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03); +} + +static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data + *data, const char *buf, size_t count, int nr, int reg) +{ + /* supported values: 2, 4, 8 */ + unsigned long v = simple_strtoul(buf, NULL, 10); + + switch (v) { + case 2: v = 1; break; + case 4: v = 2; break; + case 8: v = 3; break; + default: + dev_err(&client->dev, "fan_ripple value %ld not supported. " + "Must be one of 2, 4 or 8!\n", v); + return -EINVAL; + } + + down(&data->update_lock); + /* bits 2..7 reserved => mask with 0x03 */ + data->fan_ripple[nr - 1] &= ~0x03; + data->fan_ripple[nr - 1] |= v; + + fscpos_write_value(client, reg, data->fan_ripple[nr - 1]); + up(&data->update_lock); + return count; +} + +static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr) +{ + return sprintf(buf, "%u\n", data->pwm[nr - 1]); +} + +static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data, + const char *buf, size_t count, int nr, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10); + + /* Range: 0..255 */ + if (v < 0) v = 0; + if (v > 255) v = 255; + + down(&data->update_lock); + data->pwm[nr - 1] = v; + fscpos_write_value(client, reg, data->pwm[nr - 1]); + up(&data->update_lock); + return count; +} + +static void reset_fan_alarm(struct i2c_client *client, int nr) +{ + fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4); +} + +/* Volts */ +#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255) + +static ssize_t show_volt_12(struct device *dev, char *buf) +{ + struct fscpos_data *data = fscpos_update_device(dev); + return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200)); +} + +static ssize_t show_volt_5(struct device *dev, char *buf) +{ + struct fscpos_data *data = fscpos_update_device(dev); + return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600)); +} + +static ssize_t show_volt_batt(struct device *dev, char *buf) +{ + struct fscpos_data *data = fscpos_update_device(dev); + return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300)); +} + +/* Watchdog */ +static ssize_t show_wdog_control(struct fscpos_data *data, char *buf) +{ + /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */ + return sprintf(buf, "%u\n", data->wdog_control & 0xb0); +} + +static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data + *data, const char *buf, size_t count, int reg) +{ + /* bits 0..3 reserved => mask with 0xf0 */ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; + + down(&data->update_lock); + data->wdog_control &= ~0xf0; + data->wdog_control |= v; + fscpos_write_value(client, reg, data->wdog_control); + up(&data->update_lock); + return count; +} + +static ssize_t show_wdog_state(struct fscpos_data *data, char *buf) +{ + /* bits 0, 2..7 reserved => mask with 0x02 */ + return sprintf(buf, "%u\n", data->wdog_state & 0x02); +} + +static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data + *data, const char *buf, size_t count, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; + + /* Valid values: 2 (clear) */ + if (v != 2) { + dev_err(&client->dev, "wdog_state value %ld not supported. " + "Must be 2 to clear the state!\n", v); + return -EINVAL; + } + + down(&data->update_lock); + data->wdog_state &= ~v; + fscpos_write_value(client, reg, v); + up(&data->update_lock); + return count; +} + +static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf) +{ + return sprintf(buf, "%u\n", data->wdog_preset); +} + +static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data + *data, const char *buf, size_t count, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; + + down(&data->update_lock); + data->wdog_preset = v; + fscpos_write_value(client, reg, data->wdog_preset); + up(&data->update_lock); + return count; +} + +/* Event */ +static ssize_t show_event(struct device *dev, char *buf) +{ + /* bits 5..7 reserved => mask with 0x1f */ + struct fscpos_data *data = fscpos_update_device(dev); + return sprintf(buf, "%u\n", data->global_event & 0x9b); +} + +/* + * Sysfs stuff + */ +#define create_getter(kind, sub) \ + static ssize_t sysfs_show_##kind##sub(struct device *dev, char *buf) \ + { \ + struct fscpos_data *data = fscpos_update_device(dev); \ + return show_##kind##sub(data, buf); \ + } + +#define create_getter_n(kind, offset, sub) \ + static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, char\ + *buf) \ + { \ + struct fscpos_data *data = fscpos_update_device(dev); \ + return show_##kind##sub(data, buf, offset); \ + } + +#define create_setter(kind, sub, reg) \ + static ssize_t sysfs_set_##kind##sub (struct device *dev, const char \ + *buf, size_t count) \ + { \ + struct i2c_client *client = to_i2c_client(dev); \ + struct fscpos_data *data = i2c_get_clientdata(client); \ + return set_##kind##sub(client, data, buf, count, reg); \ + } + +#define create_setter_n(kind, offset, sub, reg) \ + static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, \ + const char *buf, size_t count) \ + { \ + struct i2c_client *client = to_i2c_client(dev); \ + struct fscpos_data *data = i2c_get_clientdata(client); \ + return set_##kind##sub(client, data, buf, count, offset, reg);\ + } + +#define create_sysfs_device_ro(kind, sub, offset) \ + static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \ + sysfs_show_##kind##offset##sub, NULL); + +#define create_sysfs_device_rw(kind, sub, offset) \ + static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \ + sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub); + +#define sysfs_ro_n(kind, sub, offset) \ + create_getter_n(kind, offset, sub); \ + create_sysfs_device_ro(kind, sub, offset); + +#define sysfs_rw_n(kind, sub, offset, reg) \ + create_getter_n(kind, offset, sub); \ + create_setter_n(kind, offset, sub, reg); \ + create_sysfs_device_rw(kind, sub, offset); + +#define sysfs_rw(kind, sub, reg) \ + create_getter(kind, sub); \ + create_setter(kind, sub, reg); \ + create_sysfs_device_rw(kind, sub,); + +#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \ + sysfs_fan(offset, reg_status, reg_ripple); \ + sysfs_rw_n(pwm,, offset, reg_min); + +#define sysfs_fan(offset, reg_status, reg_ripple) \ + sysfs_ro_n(fan, _input, offset); \ + sysfs_ro_n(fan, _status, offset); \ + sysfs_rw_n(fan, _ripple, offset, reg_ripple); + +#define sysfs_temp(offset, reg_status) \ + sysfs_ro_n(temp, _input, offset); \ + sysfs_ro_n(temp, _status, offset); \ + sysfs_rw_n(temp, _reset, offset, reg_status); + +#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \ + sysfs_rw(wdog, _control, reg_wdog_control); \ + sysfs_rw(wdog, _preset, reg_wdog_preset); \ + sysfs_rw(wdog, _state, reg_wdog_state); + +sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0], + FSCPOS_REG_PWM[0]); +sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1], + FSCPOS_REG_PWM[1]); +sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]); + +sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]); +sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]); +sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]); + +sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE, + FSCPOS_REG_WDOG_CONTROL); + +static DEVICE_ATTR(event, S_IRUGO, show_event, NULL); +static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL); +static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL); +static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL); + +static int fscpos_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, fscpos_detect); +} + +int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct fscpos_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + /* + * OK. For now, we presume we have a valid client. We now create the + * client structure, even though we cannot fill it completely yet. + * But it allows us to access fscpos_{read,write}_value. + */ + + if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct fscpos_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &fscpos_driver; + new_client->flags = 0; + + /* Do the remaining detection unless force or force_fscpos parameter */ + if (kind < 0) { + if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0) + != 0x50) /* 'P' */ + || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1) + != 0x45) /* 'E' */ + || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) + != 0x47))/* 'G' */ + { + dev_dbg(&new_client->dev, "fscpos detection failed\n"); + goto exit_free; + } + } + + /* Fill in the remaining client fields and put it in the global list */ + strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE); + + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Inizialize the fscpos chip */ + fscpos_init_client(new_client); + + /* Announce that the chip was found */ + dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_event); + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_wdog_control); + device_create_file(&new_client->dev, &dev_attr_wdog_preset); + device_create_file(&new_client->dev, &dev_attr_wdog_state); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_status); + device_create_file(&new_client->dev, &dev_attr_temp1_reset); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp2_status); + device_create_file(&new_client->dev, &dev_attr_temp2_reset); + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp3_status); + device_create_file(&new_client->dev, &dev_attr_temp3_reset); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_status); + device_create_file(&new_client->dev, &dev_attr_fan1_ripple); + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_status); + device_create_file(&new_client->dev, &dev_attr_fan2_ripple); + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &dev_attr_fan3_input); + device_create_file(&new_client->dev, &dev_attr_fan3_status); + device_create_file(&new_client->dev, &dev_attr_fan3_ripple); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int fscpos_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, client" + " not detached.\n"); + return err; + } + kfree(i2c_get_clientdata(client)); + return 0; +} + +static int fscpos_read_value(struct i2c_client *client, u8 reg) +{ + dev_dbg(&client->dev, "Read reg 0x%02x\n", reg); + return i2c_smbus_read_byte_data(client, reg); +} + +static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value); + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* Called when we have found a new FSCPOS chip */ +static void fscpos_init_client(struct i2c_client *client) +{ + struct fscpos_data *data = i2c_get_clientdata(client); + + /* read revision from chip */ + data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION); +} + +static struct fscpos_data *fscpos_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct fscpos_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if ((jiffies - data->last_updated > 2 * HZ) || + (jiffies < data->last_updated) || !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting fscpos update\n"); + + for (i = 0; i < 3; i++) { + data->temp_act[i] = fscpos_read_value(client, + FSCPOS_REG_TEMP_ACT[i]); + data->temp_status[i] = fscpos_read_value(client, + FSCPOS_REG_TEMP_STATE[i]); + data->fan_act[i] = fscpos_read_value(client, + FSCPOS_REG_FAN_ACT[i]); + data->fan_status[i] = fscpos_read_value(client, + FSCPOS_REG_FAN_STATE[i]); + data->fan_ripple[i] = fscpos_read_value(client, + FSCPOS_REG_FAN_RIPPLE[i]); + if (i < 2) { + /* fan2_min is not supported by the chip */ + data->pwm[i] = fscpos_read_value(client, + FSCPOS_REG_PWM[i]); + } + /* reset fan status if speed is back to > 0 */ + if (data->fan_status[i] != 0 && data->fan_act[i] > 0) { + reset_fan_alarm(client, i); + } + } + + data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12); + data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5); + data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT); + + data->wdog_preset = fscpos_read_value(client, + FSCPOS_REG_WDOG_PRESET); + data->wdog_state = fscpos_read_value(client, + FSCPOS_REG_WDOG_STATE); + data->wdog_control = fscpos_read_value(client, + FSCPOS_REG_WDOG_CONTROL); + + data->global_event = fscpos_read_value(client, + FSCPOS_REG_EVENT_STATE); + + data->last_updated = jiffies; + data->valid = 1; + } + up(&data->update_lock); + return data; +} + +static int __init sm_fscpos_init(void) +{ + return i2c_add_driver(&fscpos_driver); +} + +static void __exit sm_fscpos_exit(void) +{ + i2c_del_driver(&fscpos_driver); +} + +MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung " + "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>" + " and Philip Edelbrock <phil@netroedge.com>"); +MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver"); +MODULE_LICENSE("GPL"); + +module_init(sm_fscpos_init); +module_exit(sm_fscpos_exit); diff --git a/drivers/i2c/chips/gl518sm.c b/drivers/i2c/chips/gl518sm.c new file mode 100644 index 000000000000..c82d6ce21205 --- /dev/null +++ b/drivers/i2c/chips/gl518sm.c @@ -0,0 +1,605 @@ +/* + * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and + * Kyosti Malkki <kmalkki@cc.hut.fi> + * Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and + * Jean Delvare <khali@linux-fr.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare + * and advice of Greg Kroah-Hartman. + * + * Notes about the port: + * Release 0x00 of the GL518SM chipset doesn't support reading of in0, + * in1 nor in2. The original driver had an ugly workaround to get them + * anyway (changing limits and watching alarms trigger and wear off). + * We did not keep that part of the original driver in the Linux 2.6 + * version, since it was making the driver significantly more complex + * with no real benefit. + * + * History: + * 2004-01-28 Original port. (Hong-Gunn Chew) + * 2004-01-31 Code review and approval. (Jean Delvare) + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80); + +/* Many GL518 constants specified below */ + +/* The GL518 registers */ +#define GL518_REG_CHIP_ID 0x00 +#define GL518_REG_REVISION 0x01 +#define GL518_REG_VENDOR_ID 0x02 +#define GL518_REG_CONF 0x03 +#define GL518_REG_TEMP_IN 0x04 +#define GL518_REG_TEMP_MAX 0x05 +#define GL518_REG_TEMP_HYST 0x06 +#define GL518_REG_FAN_COUNT 0x07 +#define GL518_REG_FAN_LIMIT 0x08 +#define GL518_REG_VIN1_LIMIT 0x09 +#define GL518_REG_VIN2_LIMIT 0x0a +#define GL518_REG_VIN3_LIMIT 0x0b +#define GL518_REG_VDD_LIMIT 0x0c +#define GL518_REG_VIN3 0x0d +#define GL518_REG_MISC 0x0f +#define GL518_REG_ALARM 0x10 +#define GL518_REG_MASK 0x11 +#define GL518_REG_INT 0x12 +#define GL518_REG_VIN2 0x13 +#define GL518_REG_VIN1 0x14 +#define GL518_REG_VDD 0x15 + + +/* + * Conversions. Rounding and limit checking is only done on the TO_REG + * variants. Note that you should be a bit careful with which arguments + * these macros are called: arguments may be evaluated more than once. + * Fixing this is just not worth it. + */ + +#define RAW_FROM_REG(val) val + +#define BOOL_FROM_REG(val) ((val)?0:1) +#define BOOL_TO_REG(val) ((val)?0:1) + +#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0? \ + (val)-500:(val)+500)/1000)+119),0,255)) +#define TEMP_FROM_REG(val) (((val) - 119) * 1000) + +static inline u8 FAN_TO_REG(long rpm, int div) +{ + long rpmdiv; + if (rpm == 0) + return 0; + rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div; + return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255); +} +#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div)))) + +#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255)) +#define IN_FROM_REG(val) ((val)*19) + +#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255)) +#define VDD_FROM_REG(val) (((val)*95+2)/4) + +#define DIV_TO_REG(val) ((val)==4?2:(val)==2?1:(val)==1?0:3) +#define DIV_FROM_REG(val) (1 << (val)) + +#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask) +#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f) + +/* Each client has this additional data */ +struct gl518_data { + struct i2c_client client; + enum chips type; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 voltage_in[4]; /* Register values; [0] = VDD */ + u8 voltage_min[4]; /* Register values; [0] = VDD */ + u8 voltage_max[4]; /* Register values; [0] = VDD */ + u8 iter_voltage_in[4]; /* Register values; [0] = VDD */ + u8 fan_in[2]; + u8 fan_min[2]; + u8 fan_div[2]; /* Register encoding, shifted right */ + u8 fan_auto1; /* Boolean */ + u8 temp_in; /* Register values */ + u8 temp_max; /* Register values */ + u8 temp_hyst; /* Register values */ + u8 alarms; /* Register value */ + u8 alarm_mask; /* Register value */ + u8 beep_mask; /* Register value */ + u8 beep_enable; /* Boolean */ +}; + +static int gl518_attach_adapter(struct i2c_adapter *adapter); +static int gl518_detect(struct i2c_adapter *adapter, int address, int kind); +static void gl518_init_client(struct i2c_client *client); +static int gl518_detach_client(struct i2c_client *client); +static int gl518_read_value(struct i2c_client *client, u8 reg); +static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value); +static struct gl518_data *gl518_update_device(struct device *dev); + +/* This is the driver that will be inserted */ +static struct i2c_driver gl518_driver = { + .owner = THIS_MODULE, + .name = "gl518sm", + .id = I2C_DRIVERID_GL518, + .flags = I2C_DF_NOTIFY, + .attach_adapter = gl518_attach_adapter, + .detach_client = gl518_detach_client, +}; + +/* + * Sysfs stuff + */ + +#define show(type, suffix, value) \ +static ssize_t show_##suffix(struct device *dev, char *buf) \ +{ \ + struct gl518_data *data = gl518_update_device(dev); \ + return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \ +} + +#define show_fan(suffix, value, index) \ +static ssize_t show_##suffix(struct device *dev, char *buf) \ +{ \ + struct gl518_data *data = gl518_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index], \ + DIV_FROM_REG(data->fan_div[index]))); \ +} + +show(TEMP, temp_input1, temp_in); +show(TEMP, temp_max1, temp_max); +show(TEMP, temp_hyst1, temp_hyst); +show(BOOL, fan_auto1, fan_auto1); +show_fan(fan_input1, fan_in, 0); +show_fan(fan_input2, fan_in, 1); +show_fan(fan_min1, fan_min, 0); +show_fan(fan_min2, fan_min, 1); +show(DIV, fan_div1, fan_div[0]); +show(DIV, fan_div2, fan_div[1]); +show(VDD, in_input0, voltage_in[0]); +show(IN, in_input1, voltage_in[1]); +show(IN, in_input2, voltage_in[2]); +show(IN, in_input3, voltage_in[3]); +show(VDD, in_min0, voltage_min[0]); +show(IN, in_min1, voltage_min[1]); +show(IN, in_min2, voltage_min[2]); +show(IN, in_min3, voltage_min[3]); +show(VDD, in_max0, voltage_max[0]); +show(IN, in_max1, voltage_max[1]); +show(IN, in_max2, voltage_max[2]); +show(IN, in_max3, voltage_max[3]); +show(RAW, alarms, alarms); +show(BOOL, beep_enable, beep_enable); +show(BEEP_MASK, beep_mask, beep_mask); + +#define set(type, suffix, value, reg) \ +static ssize_t set_##suffix(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct gl518_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = type##_TO_REG(val); \ + gl518_write_value(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} + +#define set_bits(type, suffix, value, reg, mask, shift) \ +static ssize_t set_##suffix(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct gl518_data *data = i2c_get_clientdata(client); \ + int regvalue; \ + unsigned long val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + regvalue = gl518_read_value(client, reg); \ + data->value = type##_TO_REG(val); \ + regvalue = (regvalue & ~mask) | (data->value << shift); \ + gl518_write_value(client, reg, regvalue); \ + up(&data->update_lock); \ + return count; \ +} + +#define set_low(type, suffix, value, reg) \ + set_bits(type, suffix, value, reg, 0x00ff, 0) +#define set_high(type, suffix, value, reg) \ + set_bits(type, suffix, value, reg, 0xff00, 8) + +set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX); +set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST); +set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3); +set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6); +set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4); +set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT); +set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT); +set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT); +set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT); +set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT); +set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT); +set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT); +set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT); +set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2); +set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM); + +static ssize_t set_fan_min1(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gl518_data *data = i2c_get_clientdata(client); + int regvalue; + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT); + data->fan_min[0] = FAN_TO_REG(val, + DIV_FROM_REG(data->fan_div[0])); + regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8); + gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue); + + data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); + if (data->fan_min[0] == 0) + data->alarm_mask &= ~0x20; + else + data->alarm_mask |= 0x20; + data->beep_mask &= data->alarm_mask; + gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); + + up(&data->update_lock); + return count; +} + +static ssize_t set_fan_min2(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gl518_data *data = i2c_get_clientdata(client); + int regvalue; + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT); + data->fan_min[1] = FAN_TO_REG(val, + DIV_FROM_REG(data->fan_div[1])); + regvalue = (regvalue & 0xff00) | data->fan_min[1]; + gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue); + + data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); + if (data->fan_min[1] == 0) + data->alarm_mask &= ~0x40; + else + data->alarm_mask |= 0x40; + data->beep_mask &= data->alarm_mask; + gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); + + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); +static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1); +static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO, + show_temp_hyst1, set_temp_hyst1); +static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1); +static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL); +static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL); +static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1); +static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2); +static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1); +static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2); +static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL); +static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL); +static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL); +static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL); +static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0); +static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1); +static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2); +static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3); +static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0); +static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1); +static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2); +static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO, + show_beep_enable, set_beep_enable); +static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO, + show_beep_mask, set_beep_mask); + +/* + * Real code + */ + +static int gl518_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, gl518_detect); +} + +static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i; + struct i2c_client *new_client; + struct gl518_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access gl518_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct gl518_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &gl518_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + + if (kind < 0) { + if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80) + || (gl518_read_value(new_client, GL518_REG_CONF) & 0x80)) + goto exit_free; + } + + /* Determine the chip type. */ + if (kind <= 0) { + i = gl518_read_value(new_client, GL518_REG_REVISION); + if (i == 0x00) { + kind = gl518sm_r00; + } else if (i == 0x80) { + kind = gl518sm_r80; + } else { + if (kind <= 0) + dev_info(&adapter->dev, + "Ignoring 'force' parameter for unknown " + "chip at adapter %d, address 0x%02x\n", + i2c_adapter_id(adapter), address); + goto exit_free; + } + } + + /* Fill in the remaining client fields */ + strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE); + data->type = kind; + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the GL518SM chip */ + data->alarm_mask = 0xff; + data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0; + gl518_init_client((struct i2c_client *) new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_fan1_auto); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_beep_enable); + device_create_file(&new_client->dev, &dev_attr_beep_mask); + + return 0; + +/* OK, this is not exactly good programming practice, usually. But it is + very code-efficient in this case. */ + +exit_free: + kfree(data); +exit: + return err; +} + + +/* Called when we have found a new GL518SM. + Note that we preserve D4:NoFan2 and D2:beep_enable. */ +static void gl518_init_client(struct i2c_client *client) +{ + /* Make sure we leave D7:Reset untouched */ + u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f; + + /* Comparator mode (D3=0), standby mode (D6=0) */ + gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37)); + + /* Never interrupts */ + gl518_write_value(client, GL518_REG_MASK, 0x00); + + /* Clear status register (D5=1), start (D6=1) */ + gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue); + gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue); +} + +static int gl518_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + + return 0; +} + +/* Registers 0x07 to 0x0c are word-sized, others are byte-sized + GL518 uses a high-byte first convention, which is exactly opposite to + the usual practice. */ +static int gl518_read_value(struct i2c_client *client, u8 reg) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return swab16(i2c_smbus_read_word_data(client, reg)); + else + return i2c_smbus_read_byte_data(client, reg); +} + +/* Registers 0x07 to 0x0c are word-sized, others are byte-sized + GL518 uses a high-byte first convention, which is exactly opposite to + the usual practice. */ +static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return i2c_smbus_write_word_data(client, reg, swab16(value)); + else + return i2c_smbus_write_byte_data(client, reg, value); +} + +static struct gl518_data *gl518_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gl518_data *data = i2c_get_clientdata(client); + int val; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting gl518 update\n"); + + data->alarms = gl518_read_value(client, GL518_REG_INT); + data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); + + val = gl518_read_value(client, GL518_REG_VDD_LIMIT); + data->voltage_min[0] = val & 0xff; + data->voltage_max[0] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN1_LIMIT); + data->voltage_min[1] = val & 0xff; + data->voltage_max[1] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN2_LIMIT); + data->voltage_min[2] = val & 0xff; + data->voltage_max[2] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN3_LIMIT); + data->voltage_min[3] = val & 0xff; + data->voltage_max[3] = (val >> 8) & 0xff; + + val = gl518_read_value(client, GL518_REG_FAN_COUNT); + data->fan_in[0] = (val >> 8) & 0xff; + data->fan_in[1] = val & 0xff; + + val = gl518_read_value(client, GL518_REG_FAN_LIMIT); + data->fan_min[0] = (val >> 8) & 0xff; + data->fan_min[1] = val & 0xff; + + data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN); + data->temp_max = + gl518_read_value(client, GL518_REG_TEMP_MAX); + data->temp_hyst = + gl518_read_value(client, GL518_REG_TEMP_HYST); + + val = gl518_read_value(client, GL518_REG_MISC); + data->fan_div[0] = (val >> 6) & 0x03; + data->fan_div[1] = (val >> 4) & 0x03; + data->fan_auto1 = (val >> 3) & 0x01; + + data->alarms &= data->alarm_mask; + + val = gl518_read_value(client, GL518_REG_CONF); + data->beep_enable = (val >> 2) & 1; + + if (data->type != gl518sm_r00) { + data->voltage_in[0] = + gl518_read_value(client, GL518_REG_VDD); + data->voltage_in[1] = + gl518_read_value(client, GL518_REG_VIN1); + data->voltage_in[2] = + gl518_read_value(client, GL518_REG_VIN2); + } + data->voltage_in[3] = + gl518_read_value(client, GL518_REG_VIN3); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_gl518sm_init(void) +{ + return i2c_add_driver(&gl518_driver); +} + +static void __exit sensors_gl518sm_exit(void) +{ + i2c_del_driver(&gl518_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Kyosti Malkki <kmalkki@cc.hut.fi> and " + "Hong-Gunn Chew <hglinux@gunnet.org>"); +MODULE_DESCRIPTION("GL518SM driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_gl518sm_init); +module_exit(sensors_gl518sm_exit); diff --git a/drivers/i2c/chips/gl520sm.c b/drivers/i2c/chips/gl520sm.c new file mode 100644 index 000000000000..3fd17e46ffc6 --- /dev/null +++ b/drivers/i2c/chips/gl520sm.c @@ -0,0 +1,769 @@ +/* + gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>, + Kyösti Mälkki <kmalkki@cc.hut.fi> + Copyright (c) 2005 Maarten Deprez <maartendeprez@users.sourceforge.net> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> + +/* Type of the extra sensor */ +static unsigned short extra_sensor_type; +module_param(extra_sensor_type, ushort, 0); +MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)"); + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(gl520sm); + +/* Many GL520 constants specified below +One of the inputs can be configured as either temp or voltage. +That's why _TEMP2 and _IN4 access the same register +*/ + +/* The GL520 registers */ +#define GL520_REG_CHIP_ID 0x00 +#define GL520_REG_REVISION 0x01 +#define GL520_REG_CONF 0x03 +#define GL520_REG_MASK 0x11 + +#define GL520_REG_VID_INPUT 0x02 + +#define GL520_REG_IN0_INPUT 0x15 +#define GL520_REG_IN0_LIMIT 0x0c +#define GL520_REG_IN0_MIN GL520_REG_IN0_LIMIT +#define GL520_REG_IN0_MAX GL520_REG_IN0_LIMIT + +#define GL520_REG_IN1_INPUT 0x14 +#define GL520_REG_IN1_LIMIT 0x09 +#define GL520_REG_IN1_MIN GL520_REG_IN1_LIMIT +#define GL520_REG_IN1_MAX GL520_REG_IN1_LIMIT + +#define GL520_REG_IN2_INPUT 0x13 +#define GL520_REG_IN2_LIMIT 0x0a +#define GL520_REG_IN2_MIN GL520_REG_IN2_LIMIT +#define GL520_REG_IN2_MAX GL520_REG_IN2_LIMIT + +#define GL520_REG_IN3_INPUT 0x0d +#define GL520_REG_IN3_LIMIT 0x0b +#define GL520_REG_IN3_MIN GL520_REG_IN3_LIMIT +#define GL520_REG_IN3_MAX GL520_REG_IN3_LIMIT + +#define GL520_REG_IN4_INPUT 0x0e +#define GL520_REG_IN4_MAX 0x17 +#define GL520_REG_IN4_MIN 0x18 + +#define GL520_REG_TEMP1_INPUT 0x04 +#define GL520_REG_TEMP1_MAX 0x05 +#define GL520_REG_TEMP1_MAX_HYST 0x06 + +#define GL520_REG_TEMP2_INPUT 0x0e +#define GL520_REG_TEMP2_MAX 0x17 +#define GL520_REG_TEMP2_MAX_HYST 0x18 + +#define GL520_REG_FAN_INPUT 0x07 +#define GL520_REG_FAN_MIN 0x08 +#define GL520_REG_FAN_DIV 0x0f +#define GL520_REG_FAN_OFF GL520_REG_FAN_DIV + +#define GL520_REG_ALARMS 0x12 +#define GL520_REG_BEEP_MASK 0x10 +#define GL520_REG_BEEP_ENABLE GL520_REG_CONF + +/* + * Function declarations + */ + +static int gl520_attach_adapter(struct i2c_adapter *adapter); +static int gl520_detect(struct i2c_adapter *adapter, int address, int kind); +static void gl520_init_client(struct i2c_client *client); +static int gl520_detach_client(struct i2c_client *client); +static int gl520_read_value(struct i2c_client *client, u8 reg); +static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value); +static struct gl520_data *gl520_update_device(struct device *dev); + +/* Driver data */ +static struct i2c_driver gl520_driver = { + .owner = THIS_MODULE, + .name = "gl520sm", + .id = I2C_DRIVERID_GL520, + .flags = I2C_DF_NOTIFY, + .attach_adapter = gl520_attach_adapter, + .detach_client = gl520_detach_client, +}; + +/* Client data */ +struct gl520_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until the following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + u8 vid; + u8 vrm; + u8 in_input[5]; /* [0] = VVD */ + u8 in_min[5]; /* [0] = VDD */ + u8 in_max[5]; /* [0] = VDD */ + u8 fan_input[2]; + u8 fan_min[2]; + u8 fan_div[2]; + u8 fan_off; + u8 temp_input[2]; + u8 temp_max[2]; + u8 temp_max_hyst[2]; + u8 alarms; + u8 beep_enable; + u8 beep_mask; + u8 alarm_mask; + u8 two_temps; +}; + +/* + * Sysfs stuff + */ + +#define sysfs_r(type, n, item, reg) \ +static ssize_t get_##type##item (struct gl520_data *, char *, int); \ +static ssize_t get_##type##n##item (struct device *, char *); \ +static ssize_t get_##type##n##item (struct device *dev, char *buf) \ +{ \ + struct gl520_data *data = gl520_update_device(dev); \ + return get_##type##item(data, buf, (n)); \ +} + +#define sysfs_w(type, n, item, reg) \ +static ssize_t set_##type##item (struct i2c_client *, struct gl520_data *, const char *, size_t, int, int); \ +static ssize_t set_##type##n##item (struct device *, const char *, size_t); \ +static ssize_t set_##type##n##item (struct device *dev, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct gl520_data *data = i2c_get_clientdata(client); \ + return set_##type##item(client, data, buf, count, (n), reg); \ +} + +#define sysfs_rw_n(type, n, item, reg) \ +sysfs_r(type, n, item, reg) \ +sysfs_w(type, n, item, reg) \ +static DEVICE_ATTR(type##n##item, S_IRUGO | S_IWUSR, get_##type##n##item, set_##type##n##item); + +#define sysfs_ro_n(type, n, item, reg) \ +sysfs_r(type, n, item, reg) \ +static DEVICE_ATTR(type##n##item, S_IRUGO, get_##type##n##item, NULL); + +#define sysfs_rw(type, item, reg) \ +sysfs_r(type, 0, item, reg) \ +sysfs_w(type, 0, item, reg) \ +static DEVICE_ATTR(type##item, S_IRUGO | S_IWUSR, get_##type##0##item, set_##type##0##item); + +#define sysfs_ro(type, item, reg) \ +sysfs_r(type, 0, item, reg) \ +static DEVICE_ATTR(type##item, S_IRUGO, get_##type##0##item, NULL); + + +#define sysfs_vid(n) \ +sysfs_ro_n(cpu, n, _vid, GL520_REG_VID_INPUT) + +#define device_create_file_vid(client, n) \ +device_create_file(&client->dev, &dev_attr_cpu##n##_vid) + +#define sysfs_in(n) \ +sysfs_ro_n(in, n, _input, GL520_REG_IN##n##INPUT) \ +sysfs_rw_n(in, n, _min, GL520_REG_IN##n##_MIN) \ +sysfs_rw_n(in, n, _max, GL520_REG_IN##n##_MAX) \ + +#define device_create_file_in(client, n) \ +({device_create_file(&client->dev, &dev_attr_in##n##_input); \ +device_create_file(&client->dev, &dev_attr_in##n##_min); \ +device_create_file(&client->dev, &dev_attr_in##n##_max);}) + +#define sysfs_fan(n) \ +sysfs_ro_n(fan, n, _input, GL520_REG_FAN_INPUT) \ +sysfs_rw_n(fan, n, _min, GL520_REG_FAN_MIN) \ +sysfs_rw_n(fan, n, _div, GL520_REG_FAN_DIV) + +#define device_create_file_fan(client, n) \ +({device_create_file(&client->dev, &dev_attr_fan##n##_input); \ +device_create_file(&client->dev, &dev_attr_fan##n##_min); \ +device_create_file(&client->dev, &dev_attr_fan##n##_div);}) + +#define sysfs_fan_off(n) \ +sysfs_rw_n(fan, n, _off, GL520_REG_FAN_OFF) \ + +#define device_create_file_fan_off(client, n) \ +device_create_file(&client->dev, &dev_attr_fan##n##_off) + +#define sysfs_temp(n) \ +sysfs_ro_n(temp, n, _input, GL520_REG_TEMP##n##_INPUT) \ +sysfs_rw_n(temp, n, _max, GL520_REG_TEMP##n##_MAX) \ +sysfs_rw_n(temp, n, _max_hyst, GL520_REG_TEMP##n##_MAX_HYST) + +#define device_create_file_temp(client, n) \ +({device_create_file(&client->dev, &dev_attr_temp##n##_input); \ +device_create_file(&client->dev, &dev_attr_temp##n##_max); \ +device_create_file(&client->dev, &dev_attr_temp##n##_max_hyst);}) + +#define sysfs_alarms() \ +sysfs_ro(alarms, , GL520_REG_ALARMS) \ +sysfs_rw(beep_enable, , GL520_REG_BEEP_ENABLE) \ +sysfs_rw(beep_mask, , GL520_REG_BEEP_MASK) + +#define device_create_file_alarms(client) \ +({device_create_file(&client->dev, &dev_attr_alarms); \ +device_create_file(&client->dev, &dev_attr_beep_enable); \ +device_create_file(&client->dev, &dev_attr_beep_mask);}) + + +sysfs_vid(0) + +sysfs_in(0) +sysfs_in(1) +sysfs_in(2) +sysfs_in(3) +sysfs_in(4) + +sysfs_fan(1) +sysfs_fan(2) +sysfs_fan_off(1) + +sysfs_temp(1) +sysfs_temp(2) + +sysfs_alarms() + + +static ssize_t get_cpu_vid(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); +} + +#define VDD_FROM_REG(val) (((val)*95+2)/4) +#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255)) + +#define IN_FROM_REG(val) ((val)*19) +#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255)) + +static ssize_t get_in_input(struct gl520_data *data, char *buf, int n) +{ + u8 r = data->in_input[n]; + + if (n == 0) + return sprintf(buf, "%d\n", VDD_FROM_REG(r)); + else + return sprintf(buf, "%d\n", IN_FROM_REG(r)); +} + +static ssize_t get_in_min(struct gl520_data *data, char *buf, int n) +{ + u8 r = data->in_min[n]; + + if (n == 0) + return sprintf(buf, "%d\n", VDD_FROM_REG(r)); + else + return sprintf(buf, "%d\n", IN_FROM_REG(r)); +} + +static ssize_t get_in_max(struct gl520_data *data, char *buf, int n) +{ + u8 r = data->in_max[n]; + + if (n == 0) + return sprintf(buf, "%d\n", VDD_FROM_REG(r)); + else + return sprintf(buf, "%d\n", IN_FROM_REG(r)); +} + +static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + long v = simple_strtol(buf, NULL, 10); + u8 r; + + down(&data->update_lock); + + if (n == 0) + r = VDD_TO_REG(v); + else + r = IN_TO_REG(v); + + data->in_min[n] = r; + + if (n < 4) + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r); + else + gl520_write_value(client, reg, r); + + up(&data->update_lock); + return count; +} + +static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + long v = simple_strtol(buf, NULL, 10); + u8 r; + + if (n == 0) + r = VDD_TO_REG(v); + else + r = IN_TO_REG(v); + + down(&data->update_lock); + + data->in_max[n] = r; + + if (n < 4) + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8)); + else + gl520_write_value(client, reg, r); + + up(&data->update_lock); + return count; +} + +#define DIV_FROM_REG(val) (1 << (val)) +#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val) << (div)))) +#define FAN_TO_REG(val,div) ((val)<=0?0:SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255)); + +static ssize_t get_fan_input(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n - 1], data->fan_div[n - 1])); +} + +static ssize_t get_fan_min(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n - 1], data->fan_div[n - 1])); +} + +static ssize_t get_fan_div(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n - 1])); +} + +static ssize_t get_fan_off(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", data->fan_off); +} + +static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10); + u8 r; + + down(&data->update_lock); + r = FAN_TO_REG(v, data->fan_div[n - 1]); + data->fan_min[n - 1] = r; + + if (n == 1) + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8)); + else + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r); + + data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); + if (data->fan_min[n - 1] == 0) + data->alarm_mask &= (n == 1) ? ~0x20 : ~0x40; + else + data->alarm_mask |= (n == 1) ? 0x20 : 0x40; + data->beep_mask &= data->alarm_mask; + gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); + + up(&data->update_lock); + return count; +} + +static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + unsigned long v = simple_strtoul(buf, NULL, 10); + u8 r; + + switch (v) { + case 1: r = 0; break; + case 2: r = 1; break; + case 4: r = 2; break; + case 8: r = 3; break; + default: + dev_err(&client->dev, "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v); + return -EINVAL; + } + + down(&data->update_lock); + data->fan_div[n - 1] = r; + + if (n == 1) + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xc0) | (r << 6)); + else + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4)); + + up(&data->update_lock); + return count; +} + +static ssize_t set_fan_off(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + u8 r = simple_strtoul(buf, NULL, 10)?1:0; + + down(&data->update_lock); + data->fan_off = r; + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2)); + up(&data->update_lock); + return count; +} + +#define TEMP_FROM_REG(val) (((val) - 130) * 1000) +#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0?(val)-500:(val)+500) / 1000)+130),0,255)) + +static ssize_t get_temp_input(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n - 1])); +} + +static ssize_t get_temp_max(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n - 1])); +} + +static ssize_t get_temp_max_hyst(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n - 1])); +} + +static ssize_t set_temp_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + long v = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max[n - 1] = TEMP_TO_REG(v);; + gl520_write_value(client, reg, data->temp_max[n - 1]); + up(&data->update_lock); + return count; +} + +static ssize_t set_temp_max_hyst(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + long v = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max_hyst[n - 1] = TEMP_TO_REG(v); + gl520_write_value(client, reg, data->temp_max_hyst[n - 1]); + up(&data->update_lock); + return count; +} + +static ssize_t get_alarms(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", data->alarms); +} + +static ssize_t get_beep_enable(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", data->beep_enable); +} + +static ssize_t get_beep_mask(struct gl520_data *data, char *buf, int n) +{ + return sprintf(buf, "%d\n", data->beep_mask); +} + +static ssize_t set_beep_enable(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + u8 r = simple_strtoul(buf, NULL, 10)?0:1; + + down(&data->update_lock); + data->beep_enable = !r; + gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2)); + up(&data->update_lock); + return count; +} + +static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) +{ + u8 r = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + r &= data->alarm_mask; + data->beep_mask = r; + gl520_write_value(client, reg, r); + up(&data->update_lock); + return count; +} + + +/* + * Real code + */ + +static int gl520_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, gl520_detect); +} + +static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct gl520_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access gl520_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct gl520_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &gl520_driver; + new_client->flags = 0; + + /* Determine the chip type. */ + if (kind < 0) { + if ((gl520_read_value(new_client, GL520_REG_CHIP_ID) != 0x20) || + ((gl520_read_value(new_client, GL520_REG_REVISION) & 0x7f) != 0x00) || + ((gl520_read_value(new_client, GL520_REG_CONF) & 0x80) != 0x00)) { + dev_dbg(&new_client->dev, "Unknown chip type, skipping\n"); + goto exit_free; + } + } + + /* Fill in the remaining client fields */ + strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the GL520SM chip */ + gl520_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file_vid(new_client, 0); + + device_create_file_in(new_client, 0); + device_create_file_in(new_client, 1); + device_create_file_in(new_client, 2); + device_create_file_in(new_client, 3); + if (!data->two_temps) + device_create_file_in(new_client, 4); + + device_create_file_fan(new_client, 1); + device_create_file_fan(new_client, 2); + device_create_file_fan_off(new_client, 1); + + device_create_file_temp(new_client, 1); + if (data->two_temps) + device_create_file_temp(new_client, 2); + + device_create_file_alarms(new_client); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + + +/* Called when we have found a new GL520SM. */ +static void gl520_init_client(struct i2c_client *client) +{ + struct gl520_data *data = i2c_get_clientdata(client); + u8 oldconf, conf; + + conf = oldconf = gl520_read_value(client, GL520_REG_CONF); + + data->alarm_mask = 0xff; + data->vrm = i2c_which_vrm(); + + if (extra_sensor_type == 1) + conf &= ~0x10; + else if (extra_sensor_type == 2) + conf |= 0x10; + data->two_temps = !(conf & 0x10); + + /* If IRQ# is disabled, we can safely force comparator mode */ + if (!(conf & 0x20)) + conf &= 0xf7; + + /* Enable monitoring if needed */ + conf |= 0x40; + + if (conf != oldconf) + gl520_write_value(client, GL520_REG_CONF, conf); + + gl520_update_device(&(client->dev)); + + if (data->fan_min[0] == 0) + data->alarm_mask &= ~0x20; + if (data->fan_min[1] == 0) + data->alarm_mask &= ~0x40; + + data->beep_mask &= data->alarm_mask; + gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); +} + +static int gl520_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + + +/* Registers 0x07 to 0x0c are word-sized, others are byte-sized + GL520 uses a high-byte first convention */ +static int gl520_read_value(struct i2c_client *client, u8 reg) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return swab16(i2c_smbus_read_word_data(client, reg)); + else + return i2c_smbus_read_byte_data(client, reg); +} + +static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return i2c_smbus_write_word_data(client, reg, swab16(value)); + else + return i2c_smbus_write_byte_data(client, reg, value); +} + + +static struct gl520_data *gl520_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gl520_data *data = i2c_get_clientdata(client); + int val; + + down(&data->update_lock); + + if ((jiffies - data->last_updated > 2 * HZ) || + (jiffies < data->last_updated) || !data->valid) { + + dev_dbg(&client->dev, "Starting gl520sm update\n"); + + data->alarms = gl520_read_value(client, GL520_REG_ALARMS); + data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); + data->vid = gl520_read_value(client, GL520_REG_VID_INPUT) & 0x1f; + + val = gl520_read_value(client, GL520_REG_IN0_LIMIT); + data->in_min[0] = val & 0xff; + data->in_max[0] = (val >> 8) & 0xff; + val = gl520_read_value(client, GL520_REG_IN1_LIMIT); + data->in_min[1] = val & 0xff; + data->in_max[1] = (val >> 8) & 0xff; + val = gl520_read_value(client, GL520_REG_IN2_LIMIT); + data->in_min[2] = val & 0xff; + data->in_max[2] = (val >> 8) & 0xff; + val = gl520_read_value(client, GL520_REG_IN3_LIMIT); + data->in_min[3] = val & 0xff; + data->in_max[3] = (val >> 8) & 0xff; + + val = gl520_read_value(client, GL520_REG_FAN_INPUT); + data->fan_input[0] = (val >> 8) & 0xff; + data->fan_input[1] = val & 0xff; + + val = gl520_read_value(client, GL520_REG_FAN_MIN); + data->fan_min[0] = (val >> 8) & 0xff; + data->fan_min[1] = val & 0xff; + + data->temp_input[0] = gl520_read_value(client, GL520_REG_TEMP1_INPUT); + data->temp_max[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX); + data->temp_max_hyst[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX_HYST); + + val = gl520_read_value(client, GL520_REG_FAN_DIV); + data->fan_div[0] = (val >> 6) & 0x03; + data->fan_div[1] = (val >> 4) & 0x03; + data->fan_off = (val >> 2) & 0x01; + + data->alarms &= data->alarm_mask; + + val = gl520_read_value(client, GL520_REG_CONF); + data->beep_enable = !((val >> 2) & 1); + + data->in_input[0] = gl520_read_value(client, GL520_REG_IN0_INPUT); + data->in_input[1] = gl520_read_value(client, GL520_REG_IN1_INPUT); + data->in_input[2] = gl520_read_value(client, GL520_REG_IN2_INPUT); + data->in_input[3] = gl520_read_value(client, GL520_REG_IN3_INPUT); + + /* Temp1 and Vin4 are the same input */ + if (data->two_temps) { + data->temp_input[1] = gl520_read_value(client, GL520_REG_TEMP2_INPUT); + data->temp_max[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX); + data->temp_max_hyst[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX_HYST); + } else { + data->in_input[4] = gl520_read_value(client, GL520_REG_IN4_INPUT); + data->in_min[4] = gl520_read_value(client, GL520_REG_IN4_MIN); + data->in_max[4] = gl520_read_value(client, GL520_REG_IN4_MAX); + } + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + + +static int __init sensors_gl520sm_init(void) +{ + return i2c_add_driver(&gl520_driver); +} + +static void __exit sensors_gl520sm_exit(void) +{ + i2c_del_driver(&gl520_driver); +} + + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Kyösti Mälkki <kmalkki@cc.hut.fi>, " + "Maarten Deprez <maartendeprez@users.sourceforge.net>"); +MODULE_DESCRIPTION("GL520SM driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_gl520sm_init); +module_exit(sensors_gl520sm_exit); diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c new file mode 100644 index 000000000000..7f29a8aff165 --- /dev/null +++ b/drivers/i2c/chips/isp1301_omap.c @@ -0,0 +1,1658 @@ +/* + * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller + * + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2004 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#undef DEBUG +#undef VERBOSE + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> +#include <linux/usb.h> +#include <linux/usb_otg.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> + +#include <asm/irq.h> +#include <asm/arch/usb.h> + + +#ifndef DEBUG +#undef VERBOSE +#endif + + +#define DRIVER_VERSION "24 August 2004" +#define DRIVER_NAME (isp1301_driver.name) + +MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver"); +MODULE_LICENSE("GPL"); + +struct isp1301 { + struct otg_transceiver otg; + struct i2c_client client; + void (*i2c_release)(struct device *dev); + + int irq; + + u32 last_otg_ctrl; + unsigned working:1; + + struct timer_list timer; + + /* use keventd context to change the state for us */ + struct work_struct work; + + unsigned long todo; +# define WORK_UPDATE_ISP 0 /* update ISP from OTG */ +# define WORK_UPDATE_OTG 1 /* update OTG from ISP */ +# define WORK_HOST_RESUME 4 /* resume host */ +# define WORK_TIMER 6 /* timer fired */ +# define WORK_STOP 7 /* don't resubmit */ +}; + + +/* bits in OTG_CTRL_REG */ + +#define OTG_XCEIV_OUTPUTS \ + (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID) +#define OTG_XCEIV_INPUTS \ + (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID) +#define OTG_CTRL_BITS \ + (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP) + /* and OTG_PULLUP is sometimes written */ + +#define OTG_CTRL_MASK (OTG_DRIVER_SEL| \ + OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \ + OTG_CTRL_BITS) + + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_MACH_OMAP_H2 + +/* board-specific PM hooks */ + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/mach-types.h> + + +#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) + +#include <asm/arch/tps65010.h> + +#else + +static inline int tps65010_set_vbus_draw(unsigned mA) +{ + pr_debug("tps65010: draw %d mA (STUB)\n", mA); + return 0; +} + +#endif + +static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) +{ + int status = tps65010_set_vbus_draw(mA); + if (status < 0) + pr_debug(" VBUS %d mA error %d\n", mA, status); +} + +static void enable_vbus_source(struct isp1301 *isp) +{ + /* this board won't supply more than 8mA vbus power. + * some boards can switch a 100ma "unit load" (or more). + */ +} + + +/* products will deliver OTG messages with LEDs, GUI, etc */ +static inline void notresponding(struct isp1301 *isp) +{ + printk(KERN_NOTICE "OTG device not responding.\n"); +} + + +#endif + +/*-------------------------------------------------------------------------*/ + +/* only two addresses possible */ +#define ISP_BASE 0x2c +static unsigned short normal_i2c[] = { + ISP_BASE, ISP_BASE + 1, + I2C_CLIENT_END }; +static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD; + +static struct i2c_driver isp1301_driver; + +/* smbus apis are used for portability */ + +static inline u8 +isp1301_get_u8(struct isp1301 *isp, u8 reg) +{ + return i2c_smbus_read_byte_data(&isp->client, reg + 0); +} + +static inline int +isp1301_get_u16(struct isp1301 *isp, u8 reg) +{ + return i2c_smbus_read_word_data(&isp->client, reg); +} + +static inline int +isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits) +{ + return i2c_smbus_write_byte_data(&isp->client, reg + 0, bits); +} + +static inline int +isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) +{ + return i2c_smbus_write_byte_data(&isp->client, reg + 1, bits); +} + +/*-------------------------------------------------------------------------*/ + +/* identification */ +#define ISP1301_VENDOR_ID 0x00 /* u16 read */ +#define ISP1301_PRODUCT_ID 0x02 /* u16 read */ +#define ISP1301_BCD_DEVICE 0x14 /* u16 read */ + +#define I2C_VENDOR_ID_PHILIPS 0x04cc +#define I2C_PRODUCT_ID_PHILIPS_1301 0x1301 + +/* operational registers */ +#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ +# define MC1_SPEED_REG (1 << 0) +# define MC1_SUSPEND_REG (1 << 1) +# define MC1_DAT_SE0 (1 << 2) +# define MC1_TRANSPARENT (1 << 3) +# define MC1_BDIS_ACON_EN (1 << 4) +# define MC1_OE_INT_EN (1 << 5) +# define MC1_UART_EN (1 << 6) +# define MC1_MASK 0x7f +#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ +# define MC2_GLOBAL_PWR_DN (1 << 0) +# define MC2_SPD_SUSP_CTRL (1 << 1) +# define MC2_BI_DI (1 << 2) +# define MC2_TRANSP_BDIR0 (1 << 3) +# define MC2_TRANSP_BDIR1 (1 << 4) +# define MC2_AUDIO_EN (1 << 5) +# define MC2_PSW_EN (1 << 6) +# define MC2_EN2V7 (1 << 7) +#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ +# define OTG1_DP_PULLUP (1 << 0) +# define OTG1_DM_PULLUP (1 << 1) +# define OTG1_DP_PULLDOWN (1 << 2) +# define OTG1_DM_PULLDOWN (1 << 3) +# define OTG1_ID_PULLDOWN (1 << 4) +# define OTG1_VBUS_DRV (1 << 5) +# define OTG1_VBUS_DISCHRG (1 << 6) +# define OTG1_VBUS_CHRG (1 << 7) +#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ +# define OTG_B_SESS_END (1 << 6) +# define OTG_B_SESS_VLD (1 << 7) + +#define ISP1301_INTERRUPT_SOURCE 0x08 /* u8 read */ +#define ISP1301_INTERRUPT_LATCH 0x0A /* u8 read, set, +1 clear */ + +#define ISP1301_INTERRUPT_FALLING 0x0C /* u8 read, set, +1 clear */ +#define ISP1301_INTERRUPT_RISING 0x0E /* u8 read, set, +1 clear */ + +/* same bitfields in all interrupt registers */ +# define INTR_VBUS_VLD (1 << 0) +# define INTR_SESS_VLD (1 << 1) +# define INTR_DP_HI (1 << 2) +# define INTR_ID_GND (1 << 3) +# define INTR_DM_HI (1 << 4) +# define INTR_ID_FLOAT (1 << 5) +# define INTR_BDIS_ACON (1 << 6) +# define INTR_CR_INT (1 << 7) + +/*-------------------------------------------------------------------------*/ + +static const char *state_string(enum usb_otg_state state) +{ + switch (state) { + case OTG_STATE_A_IDLE: return "a_idle"; + case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise"; + case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon"; + case OTG_STATE_A_HOST: return "a_host"; + case OTG_STATE_A_SUSPEND: return "a_suspend"; + case OTG_STATE_A_PERIPHERAL: return "a_peripheral"; + case OTG_STATE_A_WAIT_VFALL: return "a_wait_vfall"; + case OTG_STATE_A_VBUS_ERR: return "a_vbus_err"; + case OTG_STATE_B_IDLE: return "b_idle"; + case OTG_STATE_B_SRP_INIT: return "b_srp_init"; + case OTG_STATE_B_PERIPHERAL: return "b_peripheral"; + case OTG_STATE_B_WAIT_ACON: return "b_wait_acon"; + case OTG_STATE_B_HOST: return "b_host"; + default: return "UNDEFINED"; + } +} + +static inline const char *state_name(struct isp1301 *isp) +{ + return state_string(isp->otg.state); +} + +#ifdef VERBOSE +#define dev_vdbg dev_dbg +#else +#define dev_vdbg(dev, fmt, arg...) do{}while(0) +#endif + +/*-------------------------------------------------------------------------*/ + +/* NOTE: some of this ISP1301 setup is specific to H2 boards; + * not everything is guarded by board-specific checks, or even using + * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI. + * + * ALSO: this currently doesn't use ISP1301 low-power modes + * while OTG is running. + */ + +static void power_down(struct isp1301 *isp) +{ + isp->otg.state = OTG_STATE_UNDEFINED; + + // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG); + + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); +} + +static void power_up(struct isp1301 *isp) +{ + // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG); + + /* do this only when cpu is driving transceiver, + * so host won't see a low speed device... + */ + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); +} + +#define NO_HOST_SUSPEND + +static int host_suspend(struct isp1301 *isp) +{ +#ifdef NO_HOST_SUSPEND + return 0; +#else + struct device *dev; + + if (!isp->otg.host) + return -ENODEV; + + /* Currently ASSUMES only the OTG port matters; + * other ports could be active... + */ + dev = isp->otg.host->controller; + return dev->driver->suspend(dev, 3, 0); +#endif +} + +static int host_resume(struct isp1301 *isp) +{ +#ifdef NO_HOST_SUSPEND + return 0; +#else + struct device *dev; + + if (!isp->otg.host) + return -ENODEV; + + dev = isp->otg.host->controller; + return dev->driver->resume(dev, 0); +#endif +} + +static int gadget_suspend(struct isp1301 *isp) +{ + isp->otg.gadget->b_hnp_enable = 0; + isp->otg.gadget->a_hnp_support = 0; + isp->otg.gadget->a_alt_hnp_support = 0; + return usb_gadget_vbus_disconnect(isp->otg.gadget); +} + +/*-------------------------------------------------------------------------*/ + +#define TIMER_MINUTES 10 +#define TIMER_JIFFIES (TIMER_MINUTES * 60 * HZ) + +/* Almost all our I2C messaging comes from a work queue's task context. + * NOTE: guaranteeing certain response times might mean we shouldn't + * share keventd's work queue; a realtime task might be safest. + */ +void +isp1301_defer_work(struct isp1301 *isp, int work) +{ + int status; + + if (isp && !test_and_set_bit(work, &isp->todo)) { + (void) get_device(&isp->client.dev); + status = schedule_work(&isp->work); + if (!status && !isp->working) + dev_vdbg(&isp->client.dev, + "work item %d may be lost\n", work); + } +} + +/* called from irq handlers */ +static void a_idle(struct isp1301 *isp, const char *tag) +{ + if (isp->otg.state == OTG_STATE_A_IDLE) + return; + + isp->otg.default_a = 1; + if (isp->otg.host) { + isp->otg.host->is_b_host = 0; + host_suspend(isp); + } + if (isp->otg.gadget) { + isp->otg.gadget->is_a_peripheral = 1; + gadget_suspend(isp); + } + isp->otg.state = OTG_STATE_A_IDLE; + isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS; + pr_debug(" --> %s/%s\n", state_name(isp), tag); +} + +/* called from irq handlers */ +static void b_idle(struct isp1301 *isp, const char *tag) +{ + if (isp->otg.state == OTG_STATE_B_IDLE) + return; + + isp->otg.default_a = 0; + if (isp->otg.host) { + isp->otg.host->is_b_host = 1; + host_suspend(isp); + } + if (isp->otg.gadget) { + isp->otg.gadget->is_a_peripheral = 0; + gadget_suspend(isp); + } + isp->otg.state = OTG_STATE_B_IDLE; + isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS; + pr_debug(" --> %s/%s\n", state_name(isp), tag); +} + +static void +dump_regs(struct isp1301 *isp, const char *label) +{ +#ifdef DEBUG + u8 ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1); + u8 status = isp1301_get_u8(isp, ISP1301_OTG_STATUS); + u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); + + pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n", + OTG_CTRL_REG, label, state_name(isp), + ctrl, status, src); + /* mode control and irq enables don't change much */ +#endif +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_OTG + +/* + * The OMAP OTG controller handles most of the OTG state transitions. + * + * We translate isp1301 outputs (mostly voltage comparator status) into + * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state + * flags into isp1301 inputs ... and infer state transitions. + */ + +#ifdef VERBOSE + +static void check_state(struct isp1301 *isp, const char *tag) +{ + enum usb_otg_state state = OTG_STATE_UNDEFINED; + u8 fsm = OTG_TEST_REG & 0x0ff; + unsigned extra = 0; + + switch (fsm) { + + /* default-b */ + case 0x0: + state = OTG_STATE_B_IDLE; + break; + case 0x3: + case 0x7: + extra = 1; + case 0x1: + state = OTG_STATE_B_PERIPHERAL; + break; + case 0x11: + state = OTG_STATE_B_SRP_INIT; + break; + + /* extra dual-role default-b states */ + case 0x12: + case 0x13: + case 0x16: + extra = 1; + case 0x17: + state = OTG_STATE_B_WAIT_ACON; + break; + case 0x34: + state = OTG_STATE_B_HOST; + break; + + /* default-a */ + case 0x36: + state = OTG_STATE_A_IDLE; + break; + case 0x3c: + state = OTG_STATE_A_WAIT_VFALL; + break; + case 0x7d: + state = OTG_STATE_A_VBUS_ERR; + break; + case 0x9e: + case 0x9f: + extra = 1; + case 0x89: + state = OTG_STATE_A_PERIPHERAL; + break; + case 0xb7: + state = OTG_STATE_A_WAIT_VRISE; + break; + case 0xb8: + state = OTG_STATE_A_WAIT_BCON; + break; + case 0xb9: + state = OTG_STATE_A_HOST; + break; + case 0xba: + state = OTG_STATE_A_SUSPEND; + break; + default: + break; + } + if (isp->otg.state == state && !extra) + return; + pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag, + state_string(state), fsm, state_name(isp), OTG_CTRL_REG); +} + +#else + +static inline void check_state(struct isp1301 *isp, const char *tag) { } + +#endif + +/* outputs from ISP1301_INTERRUPT_SOURCE */ +static void update_otg1(struct isp1301 *isp, u8 int_src) +{ + u32 otg_ctrl; + + otg_ctrl = OTG_CTRL_REG + & OTG_CTRL_MASK + & ~OTG_XCEIV_INPUTS + & ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); + if (int_src & INTR_SESS_VLD) + otg_ctrl |= OTG_ASESSVLD; + else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) { + a_idle(isp, "vfall"); + otg_ctrl &= ~OTG_CTRL_BITS; + } + if (int_src & INTR_VBUS_VLD) + otg_ctrl |= OTG_VBUSVLD; + if (int_src & INTR_ID_GND) { /* default-A */ + if (isp->otg.state == OTG_STATE_B_IDLE + || isp->otg.state == OTG_STATE_UNDEFINED) { + a_idle(isp, "init"); + return; + } + } else { /* default-B */ + otg_ctrl |= OTG_ID; + if (isp->otg.state == OTG_STATE_A_IDLE + || isp->otg.state == OTG_STATE_UNDEFINED) { + b_idle(isp, "init"); + return; + } + } + OTG_CTRL_REG = otg_ctrl; +} + +/* outputs from ISP1301_OTG_STATUS */ +static void update_otg2(struct isp1301 *isp, u8 otg_status) +{ + u32 otg_ctrl; + + otg_ctrl = OTG_CTRL_REG + & OTG_CTRL_MASK + & ~OTG_XCEIV_INPUTS + & ~(OTG_BSESSVLD|OTG_BSESSEND); + if (otg_status & OTG_B_SESS_VLD) + otg_ctrl |= OTG_BSESSVLD; + else if (otg_status & OTG_B_SESS_END) + otg_ctrl |= OTG_BSESSEND; + OTG_CTRL_REG = otg_ctrl; +} + +/* inputs going to ISP1301 */ +static void otg_update_isp(struct isp1301 *isp) +{ + u32 otg_ctrl, otg_change; + u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP; + + otg_ctrl = OTG_CTRL_REG; + otg_change = otg_ctrl ^ isp->last_otg_ctrl; + isp->last_otg_ctrl = otg_ctrl; + otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS; + + switch (isp->otg.state) { + case OTG_STATE_B_IDLE: + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_SRP_INIT: + if (!(otg_ctrl & OTG_PULLUP)) { + // if (otg_ctrl & OTG_B_HNPEN) { + if (isp->otg.gadget->b_hnp_enable) { + isp->otg.state = OTG_STATE_B_WAIT_ACON; + pr_debug(" --> b_wait_acon\n"); + } + goto pulldown; + } +pullup: + set |= OTG1_DP_PULLUP; + clr |= OTG1_DP_PULLDOWN; + break; + case OTG_STATE_A_SUSPEND: + case OTG_STATE_A_PERIPHERAL: + if (otg_ctrl & OTG_PULLUP) + goto pullup; + /* FALLTHROUGH */ + // case OTG_STATE_B_WAIT_ACON: + default: +pulldown: + set |= OTG1_DP_PULLDOWN; + clr |= OTG1_DP_PULLUP; + break; + } + +# define toggle(OTG,ISP) do { \ + if (otg_ctrl & OTG) set |= ISP; \ + else clr |= ISP; \ + } while (0) + + if (!(isp->otg.host)) + otg_ctrl &= ~OTG_DRV_VBUS; + + switch (isp->otg.state) { + case OTG_STATE_A_SUSPEND: + if (otg_ctrl & OTG_DRV_VBUS) { + set |= OTG1_VBUS_DRV; + break; + } + /* HNP failed for some reason (A_AIDL_BDIS timeout) */ + notresponding(isp); + + /* FALLTHROUGH */ + case OTG_STATE_A_VBUS_ERR: + isp->otg.state = OTG_STATE_A_WAIT_VFALL; + pr_debug(" --> a_wait_vfall\n"); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_VFALL: + /* FIXME usbcore thinks port power is still on ... */ + clr |= OTG1_VBUS_DRV; + break; + case OTG_STATE_A_IDLE: + if (otg_ctrl & OTG_DRV_VBUS) { + isp->otg.state = OTG_STATE_A_WAIT_VRISE; + pr_debug(" --> a_wait_vrise\n"); + } + /* FALLTHROUGH */ + default: + toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV); + } + + toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG); + toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG); + +# undef toggle + + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr); + + /* HNP switch to host or peripheral; and SRP */ + if (otg_change & OTG_PULLUP) { + switch (isp->otg.state) { + case OTG_STATE_B_IDLE: + if (clr & OTG1_DP_PULLUP) + break; + isp->otg.state = OTG_STATE_B_PERIPHERAL; + pr_debug(" --> b_peripheral\n"); + break; + case OTG_STATE_A_SUSPEND: + if (clr & OTG1_DP_PULLUP) + break; + isp->otg.state = OTG_STATE_A_PERIPHERAL; + pr_debug(" --> a_peripheral\n"); + break; + default: + break; + } + OTG_CTRL_REG |= OTG_PULLUP; + } + + check_state(isp, __FUNCTION__); + dump_regs(isp, "otg->isp1301"); +} + +static irqreturn_t omap_otg_irq(int irq, void *_isp, struct pt_regs *regs) +{ + u16 otg_irq = OTG_IRQ_SRC_REG; + u32 otg_ctrl; + int ret = IRQ_NONE; + struct isp1301 *isp = _isp; + + /* update ISP1301 transciever from OTG controller */ + if (otg_irq & OPRT_CHG) { + OTG_IRQ_SRC_REG = OPRT_CHG; + isp1301_defer_work(isp, WORK_UPDATE_ISP); + ret = IRQ_HANDLED; + + /* SRP to become b_peripheral failed */ + } else if (otg_irq & B_SRP_TMROUT) { + pr_debug("otg: B_SRP_TIMEOUT, %06x\n", OTG_CTRL_REG); + notresponding(isp); + + /* gadget drivers that care should monitor all kinds of + * remote wakeup (SRP, normal) using their own timer + * to give "check cable and A-device" messages. + */ + if (isp->otg.state == OTG_STATE_B_SRP_INIT) + b_idle(isp, "srp_timeout"); + + OTG_IRQ_SRC_REG = B_SRP_TMROUT; + ret = IRQ_HANDLED; + + /* HNP to become b_host failed */ + } else if (otg_irq & B_HNP_FAIL) { + pr_debug("otg: %s B_HNP_FAIL, %06x\n", + state_name(isp), OTG_CTRL_REG); + notresponding(isp); + + otg_ctrl = OTG_CTRL_REG; + otg_ctrl |= OTG_BUSDROP; + otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + OTG_CTRL_REG = otg_ctrl; + + /* subset of b_peripheral()... */ + isp->otg.state = OTG_STATE_B_PERIPHERAL; + pr_debug(" --> b_peripheral\n"); + + OTG_IRQ_SRC_REG = B_HNP_FAIL; + ret = IRQ_HANDLED; + + /* detect SRP from B-device ... */ + } else if (otg_irq & A_SRP_DETECT) { + pr_debug("otg: %s SRP_DETECT, %06x\n", + state_name(isp), OTG_CTRL_REG); + + isp1301_defer_work(isp, WORK_UPDATE_OTG); + switch (isp->otg.state) { + case OTG_STATE_A_IDLE: + if (!isp->otg.host) + break; + isp1301_defer_work(isp, WORK_HOST_RESUME); + otg_ctrl = OTG_CTRL_REG; + otg_ctrl |= OTG_A_BUSREQ; + otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) + & ~OTG_XCEIV_INPUTS + & OTG_CTRL_MASK; + OTG_CTRL_REG = otg_ctrl; + break; + default: + break; + } + + OTG_IRQ_SRC_REG = A_SRP_DETECT; + ret = IRQ_HANDLED; + + /* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise) + * we don't track them separately + */ + } else if (otg_irq & A_REQ_TMROUT) { + otg_ctrl = OTG_CTRL_REG; + pr_info("otg: BCON_TMOUT from %s, %06x\n", + state_name(isp), otg_ctrl); + notresponding(isp); + + otg_ctrl |= OTG_BUSDROP; + otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + OTG_CTRL_REG = otg_ctrl; + isp->otg.state = OTG_STATE_A_WAIT_VFALL; + + OTG_IRQ_SRC_REG = A_REQ_TMROUT; + ret = IRQ_HANDLED; + + /* A-supplied voltage fell too low; overcurrent */ + } else if (otg_irq & A_VBUS_ERR) { + otg_ctrl = OTG_CTRL_REG; + printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n", + state_name(isp), otg_irq, otg_ctrl); + + otg_ctrl |= OTG_BUSDROP; + otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + OTG_CTRL_REG = otg_ctrl; + isp->otg.state = OTG_STATE_A_VBUS_ERR; + + OTG_IRQ_SRC_REG = A_VBUS_ERR; + ret = IRQ_HANDLED; + + /* switch driver; the transciever code activates it, + * ungating the udc clock or resuming OHCI. + */ + } else if (otg_irq & DRIVER_SWITCH) { + int kick = 0; + + otg_ctrl = OTG_CTRL_REG; + printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n", + state_name(isp), + (otg_ctrl & OTG_DRIVER_SEL) + ? "gadget" : "host", + otg_ctrl); + isp1301_defer_work(isp, WORK_UPDATE_ISP); + + /* role is peripheral */ + if (otg_ctrl & OTG_DRIVER_SEL) { + switch (isp->otg.state) { + case OTG_STATE_A_IDLE: + b_idle(isp, __FUNCTION__); + break; + default: + break; + } + isp1301_defer_work(isp, WORK_UPDATE_ISP); + + /* role is host */ + } else { + if (!(otg_ctrl & OTG_ID)) { + otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + OTG_CTRL_REG = otg_ctrl | OTG_A_BUSREQ; + } + + if (isp->otg.host) { + switch (isp->otg.state) { + case OTG_STATE_B_WAIT_ACON: + isp->otg.state = OTG_STATE_B_HOST; + pr_debug(" --> b_host\n"); + kick = 1; + break; + case OTG_STATE_A_WAIT_BCON: + isp->otg.state = OTG_STATE_A_HOST; + pr_debug(" --> a_host\n"); + break; + case OTG_STATE_A_PERIPHERAL: + isp->otg.state = OTG_STATE_A_WAIT_BCON; + pr_debug(" --> a_wait_bcon\n"); + break; + default: + break; + } + isp1301_defer_work(isp, WORK_HOST_RESUME); + } + } + + OTG_IRQ_SRC_REG = DRIVER_SWITCH; + ret = IRQ_HANDLED; + + if (kick) + usb_bus_start_enum(isp->otg.host, + isp->otg.host->otg_port); + } + + check_state(isp, __FUNCTION__); + return ret; +} + +static struct platform_device *otg_dev; + +static int otg_init(struct isp1301 *isp) +{ + if (!otg_dev) + return -ENODEV; + + dump_regs(isp, __FUNCTION__); + /* some of these values are board-specific... */ + OTG_SYSCON_2_REG |= OTG_EN + /* for B-device: */ + | SRP_GPDATA /* 9msec Bdev D+ pulse */ + | SRP_GPDVBUS /* discharge after VBUS pulse */ + // | (3 << 24) /* 2msec VBUS pulse */ + /* for A-device: */ + | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */ + | SRP_DPW /* detect 167+ns SRP pulses */ + | SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */ + ; + + update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); + update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); + + check_state(isp, __FUNCTION__); + pr_debug("otg: %s, %s %06x\n", + state_name(isp), __FUNCTION__, OTG_CTRL_REG); + + OTG_IRQ_EN_REG = DRIVER_SWITCH | OPRT_CHG + | B_SRP_TMROUT | B_HNP_FAIL + | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT; + OTG_SYSCON_2_REG |= OTG_EN; + + return 0; +} + +static int otg_probe(struct device *dev) +{ + // struct omap_usb_config *config = dev->platform_data; + + otg_dev = to_platform_device(dev); + return 0; +} + +static int otg_remove(struct device *dev) +{ + otg_dev = 0; + return 0; +} + +struct device_driver omap_otg_driver = { + .name = "omap_otg", + .bus = &platform_bus_type, + .probe = otg_probe, + .remove = otg_remove, +}; + +static int otg_bind(struct isp1301 *isp) +{ + int status; + + if (otg_dev) + return -EBUSY; + + status = driver_register(&omap_otg_driver); + if (status < 0) + return status; + + if (otg_dev) + status = request_irq(otg_dev->resource[1].start, omap_otg_irq, + SA_INTERRUPT, DRIVER_NAME, isp); + else + status = -ENODEV; + + if (status < 0) + driver_unregister(&omap_otg_driver); + return status; +} + +static void otg_unbind(struct isp1301 *isp) +{ + if (!otg_dev) + return; + free_irq(otg_dev->resource[1].start, isp); +} + +#else + +/* OTG controller isn't clocked */ + +#endif /* CONFIG_USB_OTG */ + +/*-------------------------------------------------------------------------*/ + +static void b_peripheral(struct isp1301 *isp) +{ + OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS; + usb_gadget_vbus_connect(isp->otg.gadget); + +#ifdef CONFIG_USB_OTG + enable_vbus_draw(isp, 8); + otg_update_isp(isp); +#else + enable_vbus_draw(isp, 100); + /* UDC driver just set OTG_BSESSVLD */ + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN); + isp->otg.state = OTG_STATE_B_PERIPHERAL; + pr_debug(" --> b_peripheral\n"); + dump_regs(isp, "2periph"); +#endif +} + +static void isp_update_otg(struct isp1301 *isp, u8 stat) +{ + u8 isp_stat, isp_bstat; + enum usb_otg_state state = isp->otg.state; + + if (stat & INTR_BDIS_ACON) + pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp)); + + /* start certain state transitions right away */ + isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); + if (isp_stat & INTR_ID_GND) { + if (isp->otg.default_a) { + switch (state) { + case OTG_STATE_B_IDLE: + a_idle(isp, "idle"); + /* FALLTHROUGH */ + case OTG_STATE_A_IDLE: + enable_vbus_source(isp); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_VRISE: + /* we skip over OTG_STATE_A_WAIT_BCON, since + * the HC will transition to A_HOST (or + * A_SUSPEND!) without our noticing except + * when HNP is used. + */ + if (isp_stat & INTR_VBUS_VLD) + isp->otg.state = OTG_STATE_A_HOST; + break; + case OTG_STATE_A_WAIT_VFALL: + if (!(isp_stat & INTR_SESS_VLD)) + a_idle(isp, "vfell"); + break; + default: + if (!(isp_stat & INTR_VBUS_VLD)) + isp->otg.state = OTG_STATE_A_VBUS_ERR; + break; + } + isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); + } else { + switch (state) { + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_HOST: + case OTG_STATE_B_WAIT_ACON: + usb_gadget_vbus_disconnect(isp->otg.gadget); + break; + default: + break; + } + if (state != OTG_STATE_A_IDLE) + a_idle(isp, "id"); + if (isp->otg.host && state == OTG_STATE_A_IDLE) + isp1301_defer_work(isp, WORK_HOST_RESUME); + isp_bstat = 0; + } + } else { + /* if user unplugged mini-A end of cable, + * don't bypass A_WAIT_VFALL. + */ + if (isp->otg.default_a) { + switch (state) { + default: + isp->otg.state = OTG_STATE_A_WAIT_VFALL; + break; + case OTG_STATE_A_WAIT_VFALL: + state = OTG_STATE_A_IDLE; + /* khubd may take a while to notice and + * handle this disconnect, so don't go + * to B_IDLE quite yet. + */ + break; + case OTG_STATE_A_IDLE: + host_suspend(isp); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, + MC1_BDIS_ACON_EN); + isp->otg.state = OTG_STATE_B_IDLE; + OTG_CTRL_REG &= OTG_CTRL_REG & OTG_CTRL_MASK + & ~OTG_CTRL_BITS; + break; + case OTG_STATE_B_IDLE: + break; + } + } + isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); + + switch (isp->otg.state) { + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_HOST: + if (likely(isp_bstat & OTG_B_SESS_VLD)) + break; + enable_vbus_draw(isp, 0); +#ifndef CONFIG_USB_OTG + /* UDC driver will clear OTG_BSESSVLD */ + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, + OTG1_DP_PULLDOWN); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, + OTG1_DP_PULLUP); + dump_regs(isp, __FUNCTION__); +#endif + /* FALLTHROUGH */ + case OTG_STATE_B_SRP_INIT: + b_idle(isp, __FUNCTION__); + OTG_CTRL_REG &= OTG_CTRL_REG & OTG_XCEIV_OUTPUTS; + /* FALLTHROUGH */ + case OTG_STATE_B_IDLE: + if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) { +#ifdef CONFIG_USB_OTG + update_otg1(isp, isp_stat); + update_otg2(isp, isp_bstat); +#endif + b_peripheral(isp); + } else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD))) + isp_bstat |= OTG_B_SESS_END; + break; + case OTG_STATE_A_WAIT_VFALL: + break; + default: + pr_debug("otg: unsupported b-device %s\n", + state_name(isp)); + break; + } + } + + if (state != isp->otg.state) + pr_debug(" isp, %s -> %s\n", + state_string(state), state_name(isp)); + +#ifdef CONFIG_USB_OTG + /* update the OTG controller state to match the isp1301; may + * trigger OPRT_CHG irqs for changes going to the isp1301. + */ + update_otg1(isp, isp_stat); + update_otg2(isp, isp_bstat); + check_state(isp, __FUNCTION__); +#endif + + dump_regs(isp, "isp1301->otg"); +} + +/*-------------------------------------------------------------------------*/ + +static u8 isp1301_clear_latch(struct isp1301 *isp) +{ + u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch); + return latch; +} + +static void +isp1301_work(void *data) +{ + struct isp1301 *isp = data; + int stop; + + /* implicit lock: we're the only task using this device */ + isp->working = 1; + do { + stop = test_bit(WORK_STOP, &isp->todo); + +#ifdef CONFIG_USB_OTG + /* transfer state from otg engine to isp1301 */ + if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) { + otg_update_isp(isp); + put_device(&isp->client.dev); + } +#endif + /* transfer state from isp1301 to otg engine */ + if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) { + u8 stat = isp1301_clear_latch(isp); + + isp_update_otg(isp, stat); + put_device(&isp->client.dev); + } + + if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) { + u32 otg_ctrl; + + /* + * skip A_WAIT_VRISE; hc transitions invisibly + * skip A_WAIT_BCON; same. + */ + switch (isp->otg.state) { + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_WAIT_VRISE: + isp->otg.state = OTG_STATE_A_HOST; + pr_debug(" --> a_host\n"); + otg_ctrl = OTG_CTRL_REG; + otg_ctrl |= OTG_A_BUSREQ; + otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) + & OTG_CTRL_MASK; + OTG_CTRL_REG = otg_ctrl; + break; + case OTG_STATE_B_WAIT_ACON: + isp->otg.state = OTG_STATE_B_HOST; + pr_debug(" --> b_host (acon)\n"); + break; + case OTG_STATE_B_HOST: + case OTG_STATE_B_IDLE: + case OTG_STATE_A_IDLE: + break; + default: + pr_debug(" host resume in %s\n", + state_name(isp)); + } + host_resume(isp); + // mdelay(10); + put_device(&isp->client.dev); + } + + if (test_and_clear_bit(WORK_TIMER, &isp->todo)) { +#ifdef VERBOSE + dump_regs(isp, "timer"); + if (!stop) + mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); +#endif + put_device(&isp->client.dev); + } + + if (isp->todo) + dev_vdbg(&isp->client.dev, + "work done, todo = 0x%lx\n", + isp->todo); + if (stop) { + dev_dbg(&isp->client.dev, "stop\n"); + break; + } + } while (isp->todo); + isp->working = 0; +} + +static irqreturn_t isp1301_irq(int irq, void *isp, struct pt_regs *regs) +{ + isp1301_defer_work(isp, WORK_UPDATE_OTG); + return IRQ_HANDLED; +} + +static void isp1301_timer(unsigned long _isp) +{ + isp1301_defer_work((void *)_isp, WORK_TIMER); +} + +/*-------------------------------------------------------------------------*/ + +static void isp1301_release(struct device *dev) +{ + struct isp1301 *isp; + + isp = container_of(dev, struct isp1301, client.dev); + + /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ + if (isp->i2c_release) + isp->i2c_release(dev); + kfree (isp); +} + +static struct isp1301 *the_transceiver; + +static int isp1301_detach_client(struct i2c_client *i2c) +{ + struct isp1301 *isp; + + isp = container_of(i2c, struct isp1301, client); + + isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); + free_irq(isp->irq, isp); +#ifdef CONFIG_USB_OTG + otg_unbind(isp); +#endif + if (machine_is_omap_h2()) + omap_free_gpio(2); + + isp->timer.data = 0; + set_bit(WORK_STOP, &isp->todo); + del_timer_sync(&isp->timer); + flush_scheduled_work(); + + put_device(&i2c->dev); + the_transceiver = 0; + + return i2c_detach_client(i2c); +} + +/*-------------------------------------------------------------------------*/ + +/* NOTE: three modes are possible here, only one of which + * will be standards-conformant on any given system: + * + * - OTG mode (dual-role), required if there's a Mini-AB connector + * - HOST mode, for when there's one or more A (host) connectors + * - DEVICE mode, for when there's a B/Mini-B (device) connector + * + * As a rule, you won't have an isp1301 chip unless it's there to + * support the OTG mode. Other modes help testing USB controllers + * in isolation from (full) OTG support, or maybe so later board + * revisions can help to support those feature. + */ + +#ifdef CONFIG_USB_OTG + +static int isp1301_otg_enable(struct isp1301 *isp) +{ + power_up(isp); + otg_init(isp); + + /* NOTE: since we don't change this, this provides + * a few more interrupts than are strictly needed. + */ + isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, + INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); + isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, + INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); + + dev_info(&isp->client.dev, "ready for dual-role USB ...\n"); + + return 0; +} + +#endif + +/* add or disable the host device+driver */ +static int +isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) +{ + struct isp1301 *isp = container_of(otg, struct isp1301, otg); + + if (!otg || isp != the_transceiver) + return -ENODEV; + + if (!host) { + OTG_IRQ_EN_REG = 0; + power_down(isp); + isp->otg.host = 0; + return 0; + } + +#ifdef CONFIG_USB_OTG + isp->otg.host = host; + dev_dbg(&isp->client.dev, "registered host\n"); + host_suspend(isp); + if (isp->otg.gadget) + return isp1301_otg_enable(isp); + return 0; + +#elif !defined(CONFIG_USB_GADGET_OMAP) + // FIXME update its refcount + isp->otg.host = host; + + power_up(isp); + + if (machine_is_omap_h2()) + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); + + dev_info(&isp->client.dev, "A-Host sessions ok\n"); + isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, + INTR_ID_GND); + isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, + INTR_ID_GND); + + /* If this has a Mini-AB connector, this mode is highly + * nonstandard ... but can be handy for testing, especially with + * the Mini-A end of an OTG cable. (Or something nonstandard + * like MiniB-to-StandardB, maybe built with a gender mender.) + */ + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV); + + dump_regs(isp, __FUNCTION__); + + return 0; + +#else + dev_dbg(&isp->client.dev, "host sessions not allowed\n"); + return -EINVAL; +#endif + +} + +static int +isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) +{ + struct isp1301 *isp = container_of(otg, struct isp1301, otg); + + if (!otg || isp != the_transceiver) + return -ENODEV; + + if (!gadget) { + OTG_IRQ_EN_REG = 0; + if (!isp->otg.default_a) + enable_vbus_draw(isp, 0); + usb_gadget_vbus_disconnect(isp->otg.gadget); + isp->otg.gadget = 0; + power_down(isp); + return 0; + } + +#ifdef CONFIG_USB_OTG + isp->otg.gadget = gadget; + dev_dbg(&isp->client.dev, "registered gadget\n"); + /* gadget driver may be suspended until vbus_connect () */ + if (isp->otg.host) + return isp1301_otg_enable(isp); + return 0; + +#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE) + isp->otg.gadget = gadget; + // FIXME update its refcount + + OTG_CTRL_REG = (OTG_CTRL_REG & OTG_CTRL_MASK + & ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS)) + | OTG_ID; + power_up(isp); + isp->otg.state = OTG_STATE_B_IDLE; + + if (machine_is_omap_h2()) + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); + + isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, + INTR_SESS_VLD); + isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, + INTR_VBUS_VLD); + dev_info(&isp->client.dev, "B-Peripheral sessions ok\n"); + dump_regs(isp, __FUNCTION__); + + /* If this has a Mini-AB connector, this mode is highly + * nonstandard ... but can be handy for testing, so long + * as you don't plug a Mini-A cable into the jack. + */ + if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD) + b_peripheral(isp); + + return 0; + +#else + dev_dbg(&isp->client.dev, "peripheral sessions not allowed\n"); + return -EINVAL; +#endif +} + + +/*-------------------------------------------------------------------------*/ + +static int +isp1301_set_power(struct otg_transceiver *dev, unsigned mA) +{ + if (!the_transceiver) + return -ENODEV; + if (dev->state == OTG_STATE_B_PERIPHERAL) + enable_vbus_draw(the_transceiver, mA); + return 0; +} + +static int +isp1301_start_srp(struct otg_transceiver *dev) +{ + struct isp1301 *isp = container_of(dev, struct isp1301, otg); + u32 otg_ctrl; + + if (!dev || isp != the_transceiver + || isp->otg.state != OTG_STATE_B_IDLE) + return -ENODEV; + + otg_ctrl = OTG_CTRL_REG; + if (!(otg_ctrl & OTG_BSESSEND)) + return -EINVAL; + + otg_ctrl |= OTG_B_BUSREQ; + otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK; + OTG_CTRL_REG = otg_ctrl; + isp->otg.state = OTG_STATE_B_SRP_INIT; + + pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), OTG_CTRL_REG); +#ifdef CONFIG_USB_OTG + check_state(isp, __FUNCTION__); +#endif + return 0; +} + +static int +isp1301_start_hnp(struct otg_transceiver *dev) +{ +#ifdef CONFIG_USB_OTG + struct isp1301 *isp = container_of(dev, struct isp1301, otg); + + if (!dev || isp != the_transceiver) + return -ENODEV; + if (isp->otg.default_a && (isp->otg.host == NULL + || !isp->otg.host->b_hnp_enable)) + return -ENOTCONN; + if (!isp->otg.default_a && (isp->otg.gadget == NULL + || !isp->otg.gadget->b_hnp_enable)) + return -ENOTCONN; + + /* We want hardware to manage most HNP protocol timings. + * So do this part as early as possible... + */ + switch (isp->otg.state) { + case OTG_STATE_B_HOST: + isp->otg.state = OTG_STATE_B_PERIPHERAL; + /* caller will suspend next */ + break; + case OTG_STATE_A_HOST: +#if 0 + /* autoconnect mode avoids irq latency bugs */ + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, + MC1_BDIS_ACON_EN); +#endif + /* caller must suspend then clear A_BUSREQ */ + usb_gadget_vbus_connect(isp->otg.gadget); + OTG_CTRL_REG |= OTG_A_SETB_HNPEN; + + break; + case OTG_STATE_A_PERIPHERAL: + /* initiated by B-Host suspend */ + break; + default: + return -EILSEQ; + } + pr_debug("otg: HNP %s, %06x ...\n", + state_name(isp), OTG_CTRL_REG); + check_state(isp, __FUNCTION__); + return 0; +#else + /* srp-only */ + return -EINVAL; +#endif +} + +/*-------------------------------------------------------------------------*/ + +/* no error returns, they'd just make bus scanning stop */ +static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) +{ + int status; + struct isp1301 *isp; + struct i2c_client *i2c; + + if (the_transceiver) + return 0; + + isp = kcalloc(1, sizeof *isp, GFP_KERNEL); + if (!isp) + return 0; + + INIT_WORK(&isp->work, isp1301_work, isp); + init_timer(&isp->timer); + isp->timer.function = isp1301_timer; + isp->timer.data = (unsigned long) isp; + + isp->irq = -1; + isp->client.addr = address; + i2c_set_clientdata(&isp->client, isp); + isp->client.adapter = bus; + isp->client.driver = &isp1301_driver; + strlcpy(isp->client.name, DRIVER_NAME, I2C_NAME_SIZE); + i2c = &isp->client; + + /* if this is a true probe, verify the chip ... */ + if (kind < 0) { + status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); + if (status != I2C_VENDOR_ID_PHILIPS) { + dev_dbg(&bus->dev, "addr %d not philips id: %d\n", + address, status); + goto fail1; + } + status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); + if (status != I2C_PRODUCT_ID_PHILIPS_1301) { + dev_dbg(&bus->dev, "%d not isp1301, %d\n", + address, status); + goto fail1; + } + } + + status = i2c_attach_client(i2c); + if (status < 0) { + dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n", + DRIVER_NAME, address, status); +fail1: + kfree(isp); + return 0; + } + isp->i2c_release = i2c->dev.release; + i2c->dev.release = isp1301_release; + + /* initial development used chiprev 2.00 */ + status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE); + dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n", + status >> 8, status & 0xff); + + /* make like power-on reset */ + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK); + + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI); + + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, + OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, + ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + + isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); + +#ifdef CONFIG_USB_OTG + status = otg_bind(isp); + if (status < 0) { + dev_dbg(&i2c->dev, "can't bind OTG\n"); + goto fail2; + } +#endif + + if (machine_is_omap_h2()) { + /* full speed signaling by default */ + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, + MC1_SPEED_REG); + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, + MC2_SPD_SUSP_CTRL); + + /* IRQ wired at M14 */ + omap_cfg_reg(M14_1510_GPIO2); + isp->irq = OMAP_GPIO_IRQ(2); + omap_request_gpio(2); + omap_set_gpio_direction(2, 1); + omap_set_gpio_edge_ctrl(2, OMAP_GPIO_FALLING_EDGE); + } + + status = request_irq(isp->irq, isp1301_irq, + SA_SAMPLE_RANDOM, DRIVER_NAME, isp); + if (status < 0) { + dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", + isp->irq, status); +#ifdef CONFIG_USB_OTG +fail2: +#endif + i2c_detach_client(i2c); + goto fail1; + } + + isp->otg.dev = &isp->client.dev; + isp->otg.label = DRIVER_NAME; + + isp->otg.set_host = isp1301_set_host, + isp->otg.set_peripheral = isp1301_set_peripheral, + isp->otg.set_power = isp1301_set_power, + isp->otg.start_srp = isp1301_start_srp, + isp->otg.start_hnp = isp1301_start_hnp, + + enable_vbus_draw(isp, 0); + power_down(isp); + the_transceiver = isp; + +#ifdef CONFIG_USB_OTG + update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); + update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); +#endif + + dump_regs(isp, __FUNCTION__); + +#ifdef VERBOSE + mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); + dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES); +#endif + + status = otg_set_transceiver(&isp->otg); + if (status < 0) + dev_err(&i2c->dev, "can't register transceiver, %d\n", + status); + + return 0; +} + +static int isp1301_scan_bus(struct i2c_adapter *bus) +{ + if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -EINVAL; + return i2c_probe(bus, &addr_data, isp1301_probe); +} + +static struct i2c_driver isp1301_driver = { + .owner = THIS_MODULE, + .name = "isp1301_omap", + .id = 1301, /* FIXME "official", i2c-ids.h */ + .class = I2C_CLASS_HWMON, + .flags = I2C_DF_NOTIFY, + .attach_adapter = isp1301_scan_bus, + .detach_client = isp1301_detach_client, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init isp_init(void) +{ + return i2c_add_driver(&isp1301_driver); +} +module_init(isp_init); + +static void __exit isp_exit(void) +{ + if (the_transceiver) + otg_set_transceiver(0); + i2c_del_driver(&isp1301_driver); +} +module_exit(isp_exit); + diff --git a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c new file mode 100644 index 000000000000..3d484a7aff12 --- /dev/null +++ b/drivers/i2c/chips/it87.c @@ -0,0 +1,1208 @@ +/* + it87.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring. + + Supports: IT8705F Super I/O chip w/LPC interface & SMBus + IT8712F Super I/O chip w/LPC interface & SMBus + Sis950 A clone of the IT8705F + + Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> + Largely inspired by lm78.c of the same package + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + djg@pdp8.net David Gesswein 7/18/01 + Modified to fix bug with not all alarms enabled. + Added ability to read battery voltage and select temperature sensor + type at module load time. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> +#include <asm/io.h> + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, + 0x2e, 0x2f, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_2(it87, it8712); + +#define REG 0x2e /* The register to read/write */ +#define DEV 0x07 /* Register: Logical device select */ +#define VAL 0x2f /* The value to read/write */ +#define PME 0x04 /* The device with the fan registers in it */ +#define DEVID 0x20 /* Register: Device ID */ +#define DEVREV 0x22 /* Register: Device Revision */ + +static inline int +superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static int superio_inw(int reg) +{ + int val; + outb(reg++, REG); + val = inb(VAL) << 8; + outb(reg, REG); + val |= inb(VAL); + return val; +} + +static inline void +superio_select(void) +{ + outb(DEV, REG); + outb(PME, VAL); +} + +static inline void +superio_enter(void) +{ + outb(0x87, REG); + outb(0x01, REG); + outb(0x55, REG); + outb(0x55, REG); +} + +static inline void +superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); +} + +#define IT8712F_DEVID 0x8712 +#define IT8705F_DEVID 0x8705 +#define IT87_ACT_REG 0x30 +#define IT87_BASE_REG 0x60 + +/* Update battery voltage after every reading if true */ +static int update_vbat; + +/* Not all BIOSes properly configure the PWM registers */ +static int fix_pwm_polarity; + +/* Chip Type */ + +static u16 chip_type; + +/* Many IT87 constants specified below */ + +/* Length of ISA address segment */ +#define IT87_EXTENT 8 + +/* Where are the ISA address/data registers relative to the base address */ +#define IT87_ADDR_REG_OFFSET 5 +#define IT87_DATA_REG_OFFSET 6 + +/*----- The IT87 registers -----*/ + +#define IT87_REG_CONFIG 0x00 + +#define IT87_REG_ALARM1 0x01 +#define IT87_REG_ALARM2 0x02 +#define IT87_REG_ALARM3 0x03 + +#define IT87_REG_VID 0x0a +#define IT87_REG_FAN_DIV 0x0b + +/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */ + +#define IT87_REG_FAN(nr) (0x0d + (nr)) +#define IT87_REG_FAN_MIN(nr) (0x10 + (nr)) +#define IT87_REG_FAN_MAIN_CTRL 0x13 +#define IT87_REG_FAN_CTL 0x14 +#define IT87_REG_PWM(nr) (0x15 + (nr)) + +#define IT87_REG_VIN(nr) (0x20 + (nr)) +#define IT87_REG_TEMP(nr) (0x29 + (nr)) + +#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2) +#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2) +#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2) +#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2) + +#define IT87_REG_I2C_ADDR 0x48 + +#define IT87_REG_VIN_ENABLE 0x50 +#define IT87_REG_TEMP_ENABLE 0x51 + +#define IT87_REG_CHIPID 0x58 + +#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255)) +#define IN_FROM_REG(val) ((val) * 16) + +static inline u8 FAN_TO_REG(long rpm, int div) +{ + if (rpm == 0) + return 255; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, + 254); +} + +#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) + +#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ + ((val)+500)/1000),-128,127)) +#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) + +#define ALARMS_FROM_REG(val) (val) + +#define PWM_TO_REG(val) ((val) >> 1) +#define PWM_FROM_REG(val) (((val)&0x7f) << 1) + +static int DIV_TO_REG(int val) +{ + int answer = 0; + while ((val >>= 1) != 0) + answer++; + return answer; +} +#define DIV_FROM_REG(val) (1 << (val)) + + +/* For each registered IT87, we need to keep some data in memory. That + data is pointed to by it87_list[NR]->data. The structure itself is + dynamically allocated, at the same time when a new it87 client is + allocated. */ +struct it87_data { + struct i2c_client client; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 in[9]; /* Register value */ + u8 in_max[9]; /* Register value */ + u8 in_min[9]; /* Register value */ + u8 fan[3]; /* Register value */ + u8 fan_min[3]; /* Register value */ + u8 temp[3]; /* Register value */ + u8 temp_high[3]; /* Register value */ + u8 temp_low[3]; /* Register value */ + u8 sensor; /* Register value */ + u8 fan_div[3]; /* Register encoding, shifted right */ + u8 vid; /* Register encoding, combined */ + int vrm; + u32 alarms; /* Register encoding, combined */ + u8 fan_main_ctrl; /* Register value */ + u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ +}; + + +static int it87_attach_adapter(struct i2c_adapter *adapter); +static int it87_find(int *address); +static int it87_detect(struct i2c_adapter *adapter, int address, int kind); +static int it87_detach_client(struct i2c_client *client); + +static int it87_read_value(struct i2c_client *client, u8 register); +static int it87_write_value(struct i2c_client *client, u8 register, + u8 value); +static struct it87_data *it87_update_device(struct device *dev); +static int it87_check_pwm(struct i2c_client *client); +static void it87_init_client(struct i2c_client *client, struct it87_data *data); + + +static struct i2c_driver it87_driver = { + .owner = THIS_MODULE, + .name = "it87", + .id = I2C_DRIVERID_IT87, + .flags = I2C_DF_NOTIFY, + .attach_adapter = it87_attach_adapter, + .detach_client = it87_detach_client, +}; + +static ssize_t show_in(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); +} + +static ssize_t show_in_min(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); +} + +static ssize_t show_in_max(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); +} + +static ssize_t set_in_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val); + it87_write_value(client, IT87_REG_VIN_MIN(nr), + data->in_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t set_in_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val); + it87_write_value(client, IT87_REG_VIN_MAX(nr), + data->in_max[nr]); + up(&data->update_lock); + return count; +} + +#define show_in_offset(offset) \ +static ssize_t \ + show_in##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); + +#define limit_in_offset(offset) \ +static ssize_t \ + show_in##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t \ + show_in##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t set_in##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t set_in##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); + +show_in_offset(0); +limit_in_offset(0); +show_in_offset(1); +limit_in_offset(1); +show_in_offset(2); +limit_in_offset(2); +show_in_offset(3); +limit_in_offset(3); +show_in_offset(4); +limit_in_offset(4); +show_in_offset(5); +limit_in_offset(5); +show_in_offset(6); +limit_in_offset(6); +show_in_offset(7); +limit_in_offset(7); +show_in_offset(8); + +/* 3 temperatures */ +static ssize_t show_temp(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); +} +static ssize_t show_temp_max(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); +} +static ssize_t show_temp_min(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr])); +} +static ssize_t set_temp_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_high[nr] = TEMP_TO_REG(val); + it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); + up(&data->update_lock); + return count; +} +static ssize_t set_temp_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_low[nr] = TEMP_TO_REG(val); + it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); + up(&data->update_lock); + return count; +} +#define show_temp_offset(offset) \ +static ssize_t show_temp_##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset - 1); \ +} \ +static ssize_t \ +show_temp_##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_temp_max(dev, buf, offset - 1); \ +} \ +static ssize_t \ +show_temp_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_temp_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_max(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_min(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL); \ +static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_max, set_temp_##offset##_max); \ +static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_min, set_temp_##offset##_min); + +show_temp_offset(1); +show_temp_offset(2); +show_temp_offset(3); + +static ssize_t show_sensor(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + u8 reg = data->sensor; /* In case the value is updated while we use it */ + + if (reg & (1 << nr)) + return sprintf(buf, "3\n"); /* thermal diode */ + if (reg & (8 << nr)) + return sprintf(buf, "2\n"); /* thermistor */ + return sprintf(buf, "0\n"); /* disabled */ +} +static ssize_t set_sensor(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + + data->sensor &= ~(1 << nr); + data->sensor &= ~(8 << nr); + /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ + if (val == 3) + data->sensor |= 1 << nr; + else if (val == 2) + data->sensor |= 8 << nr; + else if (val != 0) { + up(&data->update_lock); + return -EINVAL; + } + it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor); + up(&data->update_lock); + return count; +} +#define show_sensor_offset(offset) \ +static ssize_t show_sensor_##offset (struct device *dev, char *buf) \ +{ \ + return show_sensor(dev, buf, offset - 1); \ +} \ +static ssize_t set_sensor_##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_sensor(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ + show_sensor_##offset, set_sensor_##offset); + +show_sensor_offset(1); +show_sensor_offset(2); +show_sensor_offset(3); + +/* 3 Fans */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], + DIV_FROM_REG(data->fan_div[nr]))); +} +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf,"%d\n", + FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); +} +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); +} +static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0); +} +static ssize_t show_pwm(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]); +} +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + int i, min[3]; + u8 old; + + down(&data->update_lock); + old = it87_read_value(client, IT87_REG_FAN_DIV); + + for (i = 0; i < 3; i++) + min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i])); + + switch (nr) { + case 0: + case 1: + data->fan_div[nr] = DIV_TO_REG(val); + break; + case 2: + if (val < 8) + data->fan_div[nr] = 1; + else + data->fan_div[nr] = 3; + } + val = old & 0x80; + val |= (data->fan_div[0] & 0x07); + val |= (data->fan_div[1] & 0x07) << 3; + if (data->fan_div[2] == 3) + val |= 0x1 << 6; + it87_write_value(client, IT87_REG_FAN_DIV, val); + + for (i = 0; i < 3; i++) { + data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i])); + it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]); + } + up(&data->update_lock); + return count; +} +static ssize_t set_pwm_enable(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + + if (val == 0) { + int tmp; + /* make sure the fan is on when in on/off mode */ + tmp = it87_read_value(client, IT87_REG_FAN_CTL); + it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr)); + /* set on/off mode */ + data->fan_main_ctrl &= ~(1 << nr); + it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + } else if (val == 1) { + /* set SmartGuardian mode */ + data->fan_main_ctrl |= (1 << nr); + it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + /* set saved pwm value, clear FAN_CTLX PWM mode bit */ + it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); + } else { + up(&data->update_lock); + return -EINVAL; + } + + up(&data->update_lock); + return count; +} +static ssize_t set_pwm(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + if (val < 0 || val > 255) + return -EINVAL; + + down(&data->update_lock); + data->manual_pwm_ctl[nr] = val; + if (data->fan_main_ctrl & (1 << nr)) + it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); + up(&data->update_lock); + return count; +} + +#define show_fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_div (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_div, set_fan_##offset##_div); + +show_fan_offset(1); +show_fan_offset(2); +show_fan_offset(3); + +#define show_pwm_offset(offset) \ +static ssize_t show_pwm##offset##_enable (struct device *dev, \ + char *buf) \ +{ \ + return show_pwm_enable(dev, buf, offset - 1); \ +} \ +static ssize_t show_pwm##offset (struct device *dev, char *buf) \ +{ \ + return show_pwm(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_enable (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_enable(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_pwm##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + show_pwm##offset##_enable, \ + set_pwm##offset##_enable); \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_pwm##offset , set_pwm##offset ); + +show_pwm_offset(1); +show_pwm_offset(2); +show_pwm_offset(3); + +/* Alarms */ +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms)); +} +static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL); + +static ssize_t +show_vrm_reg(struct device *dev, char *buf) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->vrm); +} +static ssize_t +store_vrm_reg(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + data->vrm = val; + + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); +#define device_create_file_vrm(client) \ +device_create_file(&client->dev, &dev_attr_vrm) + +static ssize_t +show_vid_reg(struct device *dev, char *buf) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); +#define device_create_file_vid(client) \ +device_create_file(&client->dev, &dev_attr_cpu0_vid) + +/* This function is called when: + * it87_driver is inserted (when this module is loaded), for each + available adapter + * when a new adapter is inserted (and it87_driver is still present) */ +static int it87_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, it87_detect); +} + +/* SuperIO detection - will change normal_isa[0] if a chip is found */ +static int it87_find(int *address) +{ + int err = -ENODEV; + + superio_enter(); + chip_type = superio_inw(DEVID); + if (chip_type != IT8712F_DEVID + && chip_type != IT8705F_DEVID) + goto exit; + + superio_select(); + if (!(superio_inb(IT87_ACT_REG) & 0x01)) { + pr_info("it87: Device not activated, skipping\n"); + goto exit; + } + + *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1); + if (*address == 0) { + pr_info("it87: Base address not set, skipping\n"); + goto exit; + } + + err = 0; + pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", + chip_type, *address, superio_inb(DEVREV) & 0x0f); + +exit: + superio_exit(); + return err; +} + +/* This function is called by i2c_detect */ +int it87_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i; + struct i2c_client *new_client; + struct it87_data *data; + int err = 0; + const char *name = ""; + int is_isa = i2c_is_isa_adapter(adapter); + int enable_pwm_interface; + + if (!is_isa && + !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto ERROR0; + + /* Reserve the ISA region */ + if (is_isa) + if (!request_region(address, IT87_EXTENT, it87_driver.name)) + goto ERROR0; + + /* Probe whether there is anything available on this address. Already + done for SMBus and Super-I/O clients */ + if (kind < 0) { + if (is_isa && !chip_type) { +#define REALLY_SLOW_IO + /* We need the timeouts for at least some IT87-like chips. But only + if we read 'undefined' registers. */ + i = inb_p(address + 1); + if (inb_p(address + 2) != i + || inb_p(address + 3) != i + || inb_p(address + 7) != i) { + err = -ENODEV; + goto ERROR1; + } +#undef REALLY_SLOW_IO + + /* Let's just hope nothing breaks here */ + i = inb_p(address + 5) & 0x7f; + outb_p(~i & 0x7f, address + 5); + if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { + outb_p(i, address + 5); + err = -ENODEV; + goto ERROR1; + } + } + } + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access it87_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR1; + } + memset(data, 0, sizeof(struct it87_data)); + + new_client = &data->client; + if (is_isa) + init_MUTEX(&data->lock); + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &it87_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + + if (kind < 0) { + if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80) + || (!is_isa + && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) { + err = -ENODEV; + goto ERROR2; + } + } + + /* Determine the chip type. */ + if (kind <= 0) { + i = it87_read_value(new_client, IT87_REG_CHIPID); + if (i == 0x90) { + kind = it87; + if ((is_isa) && (chip_type == IT8712F_DEVID)) + kind = it8712; + } + else { + if (kind == 0) + dev_info(&adapter->dev, + "Ignoring 'force' parameter for unknown chip at " + "adapter %d, address 0x%02x\n", + i2c_adapter_id(adapter), address); + err = -ENODEV; + goto ERROR2; + } + } + + if (kind == it87) { + name = "it87"; + } else if (kind == it8712) { + name = "it8712"; + } + + /* Fill in the remaining client fields and put it into the global list */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->type = kind; + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR2; + + /* Check PWM configuration */ + enable_pwm_interface = it87_check_pwm(new_client); + + /* Initialize the IT87 chip */ + it87_init_client(new_client, data); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in6_input); + device_create_file(&new_client->dev, &dev_attr_in7_input); + device_create_file(&new_client->dev, &dev_attr_in8_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in6_min); + device_create_file(&new_client->dev, &dev_attr_in7_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_in5_max); + device_create_file(&new_client->dev, &dev_attr_in6_max); + device_create_file(&new_client->dev, &dev_attr_in7_max); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp3_min); + device_create_file(&new_client->dev, &dev_attr_temp1_type); + device_create_file(&new_client->dev, &dev_attr_temp2_type); + device_create_file(&new_client->dev, &dev_attr_temp3_type); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan3_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan3_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_fan3_div); + device_create_file(&new_client->dev, &dev_attr_alarms); + if (enable_pwm_interface) { + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + device_create_file(&new_client->dev, &dev_attr_pwm2_enable); + device_create_file(&new_client->dev, &dev_attr_pwm3_enable); + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &dev_attr_pwm3); + } + + if (data->type == it8712) { + data->vrm = i2c_which_vrm(); + device_create_file_vrm(new_client); + device_create_file_vid(new_client); + } + + return 0; + +ERROR2: + kfree(data); +ERROR1: + if (is_isa) + release_region(address, IT87_EXTENT); +ERROR0: + return err; +} + +static int it87_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + if(i2c_is_isa_client(client)) + release_region(client->addr, IT87_EXTENT); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +/* The SMBus locks itself, but ISA access must be locked explicitely! + We don't want to lock the whole ISA bus, so we lock each client + separately. + We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, + would slow down the IT87 access and should not be necessary. */ +static int it87_read_value(struct i2c_client *client, u8 reg) +{ + struct it87_data *data = i2c_get_clientdata(client); + + int res; + if (i2c_is_isa_client(client)) { + down(&data->lock); + outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); + res = inb_p(client->addr + IT87_DATA_REG_OFFSET); + up(&data->lock); + return res; + } else + return i2c_smbus_read_byte_data(client, reg); +} + +/* The SMBus locks itself, but ISA access muse be locked explicitely! + We don't want to lock the whole ISA bus, so we lock each client + separately. + We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, + would slow down the IT87 access and should not be necessary. */ +static int it87_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + struct it87_data *data = i2c_get_clientdata(client); + + if (i2c_is_isa_client(client)) { + down(&data->lock); + outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); + outb_p(value, client->addr + IT87_DATA_REG_OFFSET); + up(&data->lock); + return 0; + } else + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* Return 1 if and only if the PWM interface is safe to use */ +static int it87_check_pwm(struct i2c_client *client) +{ + /* Some BIOSes fail to correctly configure the IT87 fans. All fans off + * and polarity set to active low is sign that this is the case so we + * disable pwm control to protect the user. */ + int tmp = it87_read_value(client, IT87_REG_FAN_CTL); + if ((tmp & 0x87) == 0) { + if (fix_pwm_polarity) { + /* The user asks us to attempt a chip reconfiguration. + * This means switching to active high polarity and + * inverting all fan speed values. */ + int i; + u8 pwm[3]; + + for (i = 0; i < 3; i++) + pwm[i] = it87_read_value(client, + IT87_REG_PWM(i)); + + /* If any fan is in automatic pwm mode, the polarity + * might be correct, as suspicious as it seems, so we + * better don't change anything (but still disable the + * PWM interface). */ + if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { + dev_info(&client->dev, "Reconfiguring PWM to " + "active high polarity\n"); + it87_write_value(client, IT87_REG_FAN_CTL, + tmp | 0x87); + for (i = 0; i < 3; i++) + it87_write_value(client, + IT87_REG_PWM(i), + 0x7f & ~pwm[i]); + return 1; + } + + dev_info(&client->dev, "PWM configuration is " + "too broken to be fixed\n"); + } + + dev_info(&client->dev, "Detected broken BIOS " + "defaults, disabling PWM interface\n"); + return 0; + } else if (fix_pwm_polarity) { + dev_info(&client->dev, "PWM configuration looks " + "sane, won't touch\n"); + } + + return 1; +} + +/* Called when we have found a new IT87. */ +static void it87_init_client(struct i2c_client *client, struct it87_data *data) +{ + int tmp, i; + + /* initialize to sane defaults: + * - if the chip is in manual pwm mode, this will be overwritten with + * the actual settings on the chip (so in this case, initialization + * is not needed) + * - if in automatic or on/off mode, we could switch to manual mode, + * read the registers and set manual_pwm_ctl accordingly, but currently + * this is not implemented, so we initialize to something sane */ + for (i = 0; i < 3; i++) { + data->manual_pwm_ctl[i] = 0xff; + } + + /* Check if temperature channnels are reset manually or by some reason */ + tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE); + if ((tmp & 0x3f) == 0) { + /* Temp1,Temp3=thermistor; Temp2=thermal diode */ + tmp = (tmp & 0xc0) | 0x2a; + it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp); + } + data->sensor = tmp; + + /* Check if voltage monitors are reset manually or by some reason */ + tmp = it87_read_value(client, IT87_REG_VIN_ENABLE); + if ((tmp & 0xff) == 0) { + /* Enable all voltage monitors */ + it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff); + } + + /* Check if tachometers are reset manually or by some reason */ + data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); + if ((data->fan_main_ctrl & 0x70) == 0) { + /* Enable all fan tachometers */ + data->fan_main_ctrl |= 0x70; + it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + } + + /* Set current fan mode registers and the default settings for the + * other mode registers */ + for (i = 0; i < 3; i++) { + if (data->fan_main_ctrl & (1 << i)) { + /* pwm mode */ + tmp = it87_read_value(client, IT87_REG_PWM(i)); + if (tmp & 0x80) { + /* automatic pwm - not yet implemented, but + * leave the settings made by the BIOS alone + * until a change is requested via the sysfs + * interface */ + } else { + /* manual pwm */ + data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp); + } + } + } + + /* Start monitoring */ + it87_write_value(client, IT87_REG_CONFIG, + (it87_read_value(client, IT87_REG_CONFIG) & 0x36) + | (update_vbat ? 0x41 : 0x01)); +} + +static struct it87_data *it87_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + + if (update_vbat) { + /* Cleared after each update, so reenable. Value + returned by this read will be previous value */ + it87_write_value(client, IT87_REG_CONFIG, + it87_read_value(client, IT87_REG_CONFIG) | 0x40); + } + for (i = 0; i <= 7; i++) { + data->in[i] = + it87_read_value(client, IT87_REG_VIN(i)); + data->in_min[i] = + it87_read_value(client, IT87_REG_VIN_MIN(i)); + data->in_max[i] = + it87_read_value(client, IT87_REG_VIN_MAX(i)); + } + data->in[8] = + it87_read_value(client, IT87_REG_VIN(8)); + /* Temperature sensor doesn't have limit registers, set + to min and max value */ + data->in_min[8] = 0; + data->in_max[8] = 255; + + for (i = 0; i < 3; i++) { + data->fan[i] = + it87_read_value(client, IT87_REG_FAN(i)); + data->fan_min[i] = + it87_read_value(client, IT87_REG_FAN_MIN(i)); + } + for (i = 0; i < 3; i++) { + data->temp[i] = + it87_read_value(client, IT87_REG_TEMP(i)); + data->temp_high[i] = + it87_read_value(client, IT87_REG_TEMP_HIGH(i)); + data->temp_low[i] = + it87_read_value(client, IT87_REG_TEMP_LOW(i)); + } + + i = it87_read_value(client, IT87_REG_FAN_DIV); + data->fan_div[0] = i & 0x07; + data->fan_div[1] = (i >> 3) & 0x07; + data->fan_div[2] = (i & 0x40) ? 3 : 1; + + data->alarms = + it87_read_value(client, IT87_REG_ALARM1) | + (it87_read_value(client, IT87_REG_ALARM2) << 8) | + (it87_read_value(client, IT87_REG_ALARM3) << 16); + data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); + + data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE); + /* The 8705 does not have VID capability */ + if (data->type == it8712) { + data->vid = it87_read_value(client, IT87_REG_VID); + data->vid &= 0x1f; + } + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sm_it87_init(void) +{ + int addr; + + if (!it87_find(&addr)) { + normal_isa[0] = addr; + } + return i2c_add_driver(&it87_driver); +} + +static void __exit sm_it87_exit(void) +{ + i2c_del_driver(&it87_driver); +} + + +MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>"); +MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver"); +module_param(update_vbat, bool, 0); +MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); +module_param(fix_pwm_polarity, bool, 0); +MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)"); +MODULE_LICENSE("GPL"); + +module_init(sm_it87_init); +module_exit(sm_it87_exit); diff --git a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c new file mode 100644 index 000000000000..14cc5af03739 --- /dev/null +++ b/drivers/i2c/chips/lm63.c @@ -0,0 +1,581 @@ +/* + * lm63.c - driver for the National Semiconductor LM63 temperature sensor + * with integrated fan control + * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * Based on the lm90 driver. + * + * The LM63 is a sensor chip made by National Semiconductor. It measures + * two temperatures (its own and one external one) and the speed of one + * fan, those speed it can additionally control. Complete datasheet can be + * obtained from National's website at: + * http://www.national.com/pf/LM/LM63.html + * + * The LM63 is basically an LM86 with fan speed monitoring and control + * capabilities added. It misses some of the LM86 features though: + * - No low limit for local temperature. + * - No critical limit for local temperature. + * - Critical limit for remote temperature can be changed only once. We + * will consider that the critical limit is read-only. + * + * The datasheet isn't very clear about what the tachometer reading is. + * I had a explanation from National Semiconductor though. The two lower + * bits of the read value have to be masked out. The value is still 16 bit + * in width. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* + * Addresses to scan + * Address is fully defined internally and cannot be changed. + */ + +static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(lm63); + +/* + * The LM63 registers + */ + +#define LM63_REG_CONFIG1 0x03 +#define LM63_REG_CONFIG2 0xBF +#define LM63_REG_CONFIG_FAN 0x4A + +#define LM63_REG_TACH_COUNT_MSB 0x47 +#define LM63_REG_TACH_COUNT_LSB 0x46 +#define LM63_REG_TACH_LIMIT_MSB 0x49 +#define LM63_REG_TACH_LIMIT_LSB 0x48 + +#define LM63_REG_PWM_VALUE 0x4C +#define LM63_REG_PWM_FREQ 0x4D + +#define LM63_REG_LOCAL_TEMP 0x00 +#define LM63_REG_LOCAL_HIGH 0x05 + +#define LM63_REG_REMOTE_TEMP_MSB 0x01 +#define LM63_REG_REMOTE_TEMP_LSB 0x10 +#define LM63_REG_REMOTE_OFFSET_MSB 0x11 +#define LM63_REG_REMOTE_OFFSET_LSB 0x12 +#define LM63_REG_REMOTE_HIGH_MSB 0x07 +#define LM63_REG_REMOTE_HIGH_LSB 0x13 +#define LM63_REG_REMOTE_LOW_MSB 0x08 +#define LM63_REG_REMOTE_LOW_LSB 0x14 +#define LM63_REG_REMOTE_TCRIT 0x19 +#define LM63_REG_REMOTE_TCRIT_HYST 0x21 + +#define LM63_REG_ALERT_STATUS 0x02 +#define LM63_REG_ALERT_MASK 0x16 + +#define LM63_REG_MAN_ID 0xFE +#define LM63_REG_CHIP_ID 0xFF + +/* + * Conversions and various macros + * For tachometer counts, the LM63 uses 16-bit values. + * For local temperature and high limit, remote critical limit and hysteresis + * value, it uses signed 8-bit values with LSB = 1 degree Celcius. + * For remote temperature, low and high limits, it uses signed 11-bit values + * with LSB = 0.125 degree Celcius, left-justified in 16-bit registers. + */ + +#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \ + 5400000 / (reg)) +#define FAN_TO_REG(val) ((val) <= 82 ? 0xFFFC : \ + (5400000 / (val)) & 0xFFFC) +#define TEMP8_FROM_REG(reg) ((reg) * 1000) +#define TEMP8_TO_REG(val) ((val) <= -128000 ? -128 : \ + (val) >= 127000 ? 127 : \ + (val) < 0 ? ((val) - 500) / 1000 : \ + ((val) + 500) / 1000) +#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) +#define TEMP11_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ + (val) >= 127875 ? 0x7FE0 : \ + (val) < 0 ? ((val) - 62) / 125 * 32 : \ + ((val) + 62) / 125 * 32) +#define HYST_TO_REG(val) ((val) <= 0 ? 0 : \ + (val) >= 127000 ? 127 : \ + ((val) + 500) / 1000) + +/* + * Functions declaration + */ + +static int lm63_attach_adapter(struct i2c_adapter *adapter); +static int lm63_detach_client(struct i2c_client *client); + +static struct lm63_data *lm63_update_device(struct device *dev); + +static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); +static void lm63_init_client(struct i2c_client *client); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver lm63_driver = { + .owner = THIS_MODULE, + .name = "lm63", + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm63_attach_adapter, + .detach_client = lm63_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct lm63_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + u8 config, config_fan; + u16 fan1_input; + u16 fan1_low; + u8 pwm1_freq; + u8 pwm1_value; + s8 temp1_input; + s8 temp1_high; + s16 temp2_input; + s16 temp2_high; + s16 temp2_low; + s8 temp2_crit; + u8 temp2_crit_hyst; + u8 alarms; +}; + +/* + * Sysfs callback functions and files + */ + +#define show_fan(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm63_data *data = lm63_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->value)); \ +} +show_fan(fan1_input); +show_fan(fan1_low); + +static ssize_t set_fan1_low(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan1_low = FAN_TO_REG(val); + i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, + data->fan1_low & 0xFF); + i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, + data->fan1_low >> 8); + up(&data->update_lock); + return count; +} + +static ssize_t show_pwm1(struct device *dev, char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ? + 255 : (data->pwm1_value * 255 + data->pwm1_freq) / + (2 * data->pwm1_freq)); +} + +static ssize_t set_pwm1(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + unsigned long val; + + if (!(data->config_fan & 0x20)) /* register is read-only */ + return -EPERM; + + val = simple_strtoul(buf, NULL, 10); + down(&data->update_lock); + data->pwm1_value = val <= 0 ? 0 : + val >= 255 ? 2 * data->pwm1_freq : + (val * data->pwm1_freq * 2 + 127) / 255; + i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value); + up(&data->update_lock); + return count; +} + +static ssize_t show_pwm1_enable(struct device *dev, char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); +} + +#define show_temp8(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm63_data *data = lm63_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->value)); \ +} +#define show_temp11(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm63_data *data = lm63_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->value)); \ +} +show_temp8(temp1_input); +show_temp8(temp1_high); +show_temp11(temp2_input); +show_temp11(temp2_high); +show_temp11(temp2_low); +show_temp8(temp2_crit); + +#define set_temp8(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm63_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP8_TO_REG(val); \ + i2c_smbus_write_byte_data(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} +#define set_temp11(value, reg_msb, reg_lsb) \ +static ssize_t set_##value(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm63_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP11_TO_REG(val); \ + i2c_smbus_write_byte_data(client, reg_msb, data->value >> 8); \ + i2c_smbus_write_byte_data(client, reg_lsb, data->value & 0xff); \ + up(&data->update_lock); \ + return count; \ +} +set_temp8(temp1_high, LM63_REG_LOCAL_HIGH); +set_temp11(temp2_high, LM63_REG_REMOTE_HIGH_MSB, LM63_REG_REMOTE_HIGH_LSB); +set_temp11(temp2_low, LM63_REG_REMOTE_LOW_MSB, LM63_REG_REMOTE_LOW_LSB); + +/* Hysteresis register holds a relative value, while we want to present + an absolute to user-space */ +static ssize_t show_temp2_crit_hyst(struct device *dev, char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp2_crit) + - TEMP8_FROM_REG(data->temp2_crit_hyst)); +} + +/* And now the other way around, user-space provides an absolute + hysteresis value and we have to store a relative one */ +static ssize_t set_temp2_crit_hyst(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + long hyst; + + down(&data->update_lock); + hyst = TEMP8_FROM_REG(data->temp2_crit) - val; + i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, + HYST_TO_REG(hyst)); + up(&data->update_lock); + return count; +} + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} + +static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan1_input, NULL); +static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan1_low, + set_fan1_low); + +static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1); +static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL); + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_high, + set_temp1_high); + +static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp2_input, NULL); +static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp2_low, + set_temp2_low); +static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp2_high, + set_temp2_high); +static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp2_crit, NULL); +static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, + set_temp2_crit_hyst); + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* + * Real code + */ + +static int lm63_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm63_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm63_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm63_data)); + + /* The common I2C client data is placed right before the + LM63-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm63_driver; + new_client->flags = 0; + + /* Default to an LM63 if forced */ + if (kind == 0) + kind = lm63; + + if (kind < 0) { /* must identify */ + u8 man_id, chip_id, reg_config1, reg_config2; + u8 reg_alert_status, reg_alert_mask; + + man_id = i2c_smbus_read_byte_data(new_client, + LM63_REG_MAN_ID); + chip_id = i2c_smbus_read_byte_data(new_client, + LM63_REG_CHIP_ID); + reg_config1 = i2c_smbus_read_byte_data(new_client, + LM63_REG_CONFIG1); + reg_config2 = i2c_smbus_read_byte_data(new_client, + LM63_REG_CONFIG2); + reg_alert_status = i2c_smbus_read_byte_data(new_client, + LM63_REG_ALERT_STATUS); + reg_alert_mask = i2c_smbus_read_byte_data(new_client, + LM63_REG_ALERT_MASK); + + if (man_id == 0x01 /* National Semiconductor */ + && chip_id == 0x41 /* LM63 */ + && (reg_config1 & 0x18) == 0x00 + && (reg_config2 & 0xF8) == 0x00 + && (reg_alert_status & 0x20) == 0x00 + && (reg_alert_mask & 0xA4) == 0xA4) { + kind = lm63; + } else { /* failed */ + dev_dbg(&adapter->dev, "Unsupported chip " + "(man_id=0x%02X, chip_id=0x%02X).\n", + man_id, chip_id); + goto exit_free; + } + } + + strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the LM63 chip */ + lm63_init_client(new_client); + + /* Register sysfs hooks */ + if (data->config & 0x04) { /* tachometer enabled */ + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + } + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +/* Idealy we shouldn't have to initialize anything, since the BIOS + should have taken care of everything */ +static void lm63_init_client(struct i2c_client *client) +{ + struct lm63_data *data = i2c_get_clientdata(client); + + data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); + data->config_fan = i2c_smbus_read_byte_data(client, + LM63_REG_CONFIG_FAN); + + /* Start converting if needed */ + if (data->config & 0x40) { /* standby */ + dev_dbg(&client->dev, "Switching to operational mode"); + data->config &= 0xA7; + i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, + data->config); + } + + /* We may need pwm1_freq before ever updating the client data */ + data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); + if (data->pwm1_freq == 0) + data->pwm1_freq = 1; + + /* Show some debug info about the LM63 configuration */ + dev_dbg(&client->dev, "Alert/tach pin configured for %s\n", + (data->config & 0x04) ? "tachometer input" : + "alert output"); + dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n", + (data->config_fan & 0x08) ? "1.4" : "360", + ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); + dev_dbg(&client->dev, "PWM output active %s, %s mode\n", + (data->config_fan & 0x10) ? "low" : "high", + (data->config_fan & 0x20) ? "manual" : "auto"); +} + +static int lm63_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct lm63_data *lm63_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + if (data->config & 0x04) { /* tachometer enabled */ + /* order matters for fan1_input */ + data->fan1_input = i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_LSB) & 0xFC; + data->fan1_input |= i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_MSB) << 8; + data->fan1_low = (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_LSB) & 0xFC) + | (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_MSB) << 8); + } + + data->pwm1_freq = i2c_smbus_read_byte_data(client, + LM63_REG_PWM_FREQ); + if (data->pwm1_freq == 0) + data->pwm1_freq = 1; + data->pwm1_value = i2c_smbus_read_byte_data(client, + LM63_REG_PWM_VALUE); + + data->temp1_input = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_TEMP); + data->temp1_high = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_HIGH); + + /* order matters for temp2_input */ + data->temp2_input = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_MSB) << 8; + data->temp2_input |= i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_LSB); + data->temp2_high = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_LSB); + data->temp2_low = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_LOW_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_LOW_LSB); + data->temp2_crit = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TCRIT); + data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TCRIT_HYST); + + data->alarms = i2c_smbus_read_byte_data(client, + LM63_REG_ALERT_STATUS) & 0x7F; + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm63_init(void) +{ + return i2c_add_driver(&lm63_driver); +} + +static void __exit sensors_lm63_exit(void) +{ + i2c_del_driver(&lm63_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("LM63 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm63_init); +module_exit(sensors_lm63_exit); diff --git a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c new file mode 100644 index 000000000000..0e86cc893981 --- /dev/null +++ b/drivers/i2c/chips/lm75.c @@ -0,0 +1,297 @@ +/* + lm75.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include "lm75.h" + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, + 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(lm75); + +/* Many LM75 constants specified below */ + +/* The LM75 registers */ +#define LM75_REG_TEMP 0x00 +#define LM75_REG_CONF 0x01 +#define LM75_REG_TEMP_HYST 0x02 +#define LM75_REG_TEMP_OS 0x03 + +/* Each client has this additional data */ +struct lm75_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + u16 temp_input; /* Register values */ + u16 temp_max; + u16 temp_hyst; +}; + +static int lm75_attach_adapter(struct i2c_adapter *adapter); +static int lm75_detect(struct i2c_adapter *adapter, int address, int kind); +static void lm75_init_client(struct i2c_client *client); +static int lm75_detach_client(struct i2c_client *client); +static int lm75_read_value(struct i2c_client *client, u8 reg); +static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); +static struct lm75_data *lm75_update_device(struct device *dev); + + +/* This is the driver that will be inserted */ +static struct i2c_driver lm75_driver = { + .owner = THIS_MODULE, + .name = "lm75", + .id = I2C_DRIVERID_LM75, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm75_attach_adapter, + .detach_client = lm75_detach_client, +}; + +#define show(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm75_data *data = lm75_update_device(dev); \ + return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \ +} +show(temp_max); +show(temp_hyst); +show(temp_input); + +#define set(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm75_data *data = i2c_get_clientdata(client); \ + int temp = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = LM75_TEMP_TO_REG(temp); \ + lm75_write_value(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} +set(temp_max, LM75_REG_TEMP_OS); +set(temp_hyst, LM75_REG_TEMP_HYST); + +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); +static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); + +static int lm75_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm75_detect); +} + +/* This function is called by i2c_detect */ +static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i; + struct i2c_client *new_client; + struct lm75_data *data; + int err = 0; + const char *name = ""; + + /* Make sure we aren't probing the ISA bus!! This is just a safety check + at this moment; i2c_detect really won't call us. */ +#ifdef DEBUG + if (i2c_is_isa_adapter(adapter)) { + dev_dbg(&adapter->dev, + "lm75_detect called for an ISA bus adapter?!?\n"); + goto exit; + } +#endif + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access lm75_{read,write}_value. */ + if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm75_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm75_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. There is no identification- + dedicated register so we have to rely on several tricks: + unused bits, registers cycling over 8-address boundaries, + addresses 0x04-0x07 returning the last read value. + The cycling+unused addresses combination is not tested, + since it would significantly slow the detection down and would + hardly add any value. */ + if (kind < 0) { + int cur, conf, hyst, os; + + /* Unused addresses */ + cur = i2c_smbus_read_word_data(new_client, 0); + conf = i2c_smbus_read_byte_data(new_client, 1); + hyst = i2c_smbus_read_word_data(new_client, 2); + if (i2c_smbus_read_word_data(new_client, 4) != hyst + || i2c_smbus_read_word_data(new_client, 5) != hyst + || i2c_smbus_read_word_data(new_client, 6) != hyst + || i2c_smbus_read_word_data(new_client, 7) != hyst) + goto exit_free; + os = i2c_smbus_read_word_data(new_client, 3); + if (i2c_smbus_read_word_data(new_client, 4) != os + || i2c_smbus_read_word_data(new_client, 5) != os + || i2c_smbus_read_word_data(new_client, 6) != os + || i2c_smbus_read_word_data(new_client, 7) != os) + goto exit_free; + + /* Unused bits */ + if (conf & 0xe0) + goto exit_free; + + /* Addresses cycling */ + for (i = 8; i < 0xff; i += 8) + if (i2c_smbus_read_byte_data(new_client, i + 1) != conf + || i2c_smbus_read_word_data(new_client, i + 2) != hyst + || i2c_smbus_read_word_data(new_client, i + 3) != os) + goto exit_free; + } + + /* Determine the chip type - only one kind supported! */ + if (kind <= 0) + kind = lm75; + + if (kind == lm75) { + name = "lm75"; + } + + /* Fill in the remaining client fields and put it into the global list */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the LM75 chip */ + lm75_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int lm75_detach_client(struct i2c_client *client) +{ + i2c_detach_client(client); + kfree(i2c_get_clientdata(client)); + return 0; +} + +/* All registers are word-sized, except for the configuration register. + LM75 uses a high-byte first convention, which is exactly opposite to + the usual practice. */ +static int lm75_read_value(struct i2c_client *client, u8 reg) +{ + if (reg == LM75_REG_CONF) + return i2c_smbus_read_byte_data(client, reg); + else + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +/* All registers are word-sized, except for the configuration register. + LM75 uses a high-byte first convention, which is exactly opposite to + the usual practice. */ +static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if (reg == LM75_REG_CONF) + return i2c_smbus_write_byte_data(client, reg, value); + else + return i2c_smbus_write_word_data(client, reg, swab16(value)); +} + +static void lm75_init_client(struct i2c_client *client) +{ + /* Initialize the LM75 chip */ + lm75_write_value(client, LM75_REG_CONF, 0); +} + +static struct lm75_data *lm75_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm75_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting lm75 update\n"); + + data->temp_input = lm75_read_value(client, LM75_REG_TEMP); + data->temp_max = lm75_read_value(client, LM75_REG_TEMP_OS); + data->temp_hyst = lm75_read_value(client, LM75_REG_TEMP_HYST); + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm75_init(void) +{ + return i2c_add_driver(&lm75_driver); +} + +static void __exit sensors_lm75_exit(void) +{ + i2c_del_driver(&lm75_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_DESCRIPTION("LM75 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm75_init); +module_exit(sensors_lm75_exit); diff --git a/drivers/i2c/chips/lm75.h b/drivers/i2c/chips/lm75.h new file mode 100644 index 000000000000..63e3f2fb4c21 --- /dev/null +++ b/drivers/i2c/chips/lm75.h @@ -0,0 +1,49 @@ +/* + lm75.h - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + This file contains common code for encoding/decoding LM75 type + temperature readings, which are emulated by many of the chips + we support. As the user is unlikely to load more than one driver + which contains this code, we don't worry about the wasted space. +*/ + +#include <linux/i2c-sensor.h> + +/* straight from the datasheet */ +#define LM75_TEMP_MIN (-55000) +#define LM75_TEMP_MAX 125000 + +/* TEMP: 0.001C/bit (-55C to +125C) + REG: (0.5C/bit, two's complement) << 7 */ +static inline u16 LM75_TEMP_TO_REG(int temp) +{ + int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); + ntemp += (ntemp<0 ? -250 : 250); + return (u16)((ntemp / 500) << 7); +} + +static inline int LM75_TEMP_FROM_REG(u16 reg) +{ + /* use integer division instead of equivalent right shift to + guarantee arithmetic shift and preserve the sign */ + return ((s16)reg / 128) * 500; +} + diff --git a/drivers/i2c/chips/lm77.c b/drivers/i2c/chips/lm77.c new file mode 100644 index 000000000000..f56b7a37de75 --- /dev/null +++ b/drivers/i2c/chips/lm77.c @@ -0,0 +1,421 @@ +/* + lm77.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + + Copyright (c) 2004 Andras BALI <drewie@freemail.hu> + + Heavily based on lm75.c by Frodo Looijaard <frodol@dds.nl>. The LM77 + is a temperature sensor and thermal window comparator with 0.5 deg + resolution made by National Semiconductor. Complete datasheet can be + obtained at their site: + http://www.national.com/pf/LM/LM77.html + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(lm77); + +/* The LM77 registers */ +#define LM77_REG_TEMP 0x00 +#define LM77_REG_CONF 0x01 +#define LM77_REG_TEMP_HYST 0x02 +#define LM77_REG_TEMP_CRIT 0x03 +#define LM77_REG_TEMP_MIN 0x04 +#define LM77_REG_TEMP_MAX 0x05 + +/* Each client has this additional data */ +struct lm77_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; + unsigned long last_updated; /* In jiffies */ + int temp_input; /* Temperatures */ + int temp_crit; + int temp_min; + int temp_max; + int temp_hyst; + u8 alarms; +}; + +static int lm77_attach_adapter(struct i2c_adapter *adapter); +static int lm77_detect(struct i2c_adapter *adapter, int address, int kind); +static void lm77_init_client(struct i2c_client *client); +static int lm77_detach_client(struct i2c_client *client); +static u16 lm77_read_value(struct i2c_client *client, u8 reg); +static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value); + +static struct lm77_data *lm77_update_device(struct device *dev); + + +/* This is the driver that will be inserted */ +static struct i2c_driver lm77_driver = { + .owner = THIS_MODULE, + .name = "lm77", + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm77_attach_adapter, + .detach_client = lm77_detach_client, +}; + +/* straight from the datasheet */ +#define LM77_TEMP_MIN (-55000) +#define LM77_TEMP_MAX 125000 + +/* In the temperature registers, the low 3 bits are not part of the + temperature values; they are the status bits. */ +static inline u16 LM77_TEMP_TO_REG(int temp) +{ + int ntemp = SENSORS_LIMIT(temp, LM77_TEMP_MIN, LM77_TEMP_MAX); + return (u16)((ntemp / 500) * 8); +} + +static inline int LM77_TEMP_FROM_REG(u16 reg) +{ + return ((int)reg / 8) * 500; +} + +/* sysfs stuff */ + +/* read routines for temperature limits */ +#define show(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm77_data *data = lm77_update_device(dev); \ + return sprintf(buf, "%d\n", data->value); \ +} + +show(temp_input); +show(temp_crit); +show(temp_min); +show(temp_max); +show(alarms); + +/* read routines for hysteresis values */ +static ssize_t show_temp_crit_hyst(struct device *dev, char *buf) +{ + struct lm77_data *data = lm77_update_device(dev); + return sprintf(buf, "%d\n", data->temp_crit - data->temp_hyst); +} +static ssize_t show_temp_min_hyst(struct device *dev, char *buf) +{ + struct lm77_data *data = lm77_update_device(dev); + return sprintf(buf, "%d\n", data->temp_min + data->temp_hyst); +} +static ssize_t show_temp_max_hyst(struct device *dev, char *buf) +{ + struct lm77_data *data = lm77_update_device(dev); + return sprintf(buf, "%d\n", data->temp_max - data->temp_hyst); +} + +/* write routines */ +#define set(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm77_data *data = i2c_get_clientdata(client); \ + long val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = val; \ + lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value)); \ + up(&data->update_lock); \ + return count; \ +} + +set(temp_min, LM77_REG_TEMP_MIN); +set(temp_max, LM77_REG_TEMP_MAX); + +/* hysteresis is stored as a relative value on the chip, so it has to be + converted first */ +static ssize_t set_temp_crit_hyst(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm77_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->temp_hyst = data->temp_crit - val; + lm77_write_value(client, LM77_REG_TEMP_HYST, + LM77_TEMP_TO_REG(data->temp_hyst)); + up(&data->update_lock); + return count; +} + +/* preserve hysteresis when setting T_crit */ +static ssize_t set_temp_crit(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm77_data *data = i2c_get_clientdata(client); + long val = simple_strtoul(buf, NULL, 10); + int oldcrithyst; + + down(&data->update_lock); + oldcrithyst = data->temp_crit - data->temp_hyst; + data->temp_crit = val; + data->temp_hyst = data->temp_crit - oldcrithyst; + lm77_write_value(client, LM77_REG_TEMP_CRIT, + LM77_TEMP_TO_REG(data->temp_crit)); + lm77_write_value(client, LM77_REG_TEMP_HYST, + LM77_TEMP_TO_REG(data->temp_hyst)); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, + show_temp_input, NULL); +static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, + show_temp_crit, set_temp_crit); +static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, + show_temp_min, set_temp_min); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_temp_max, set_temp_max); + +static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, + show_temp_crit_hyst, set_temp_crit_hyst); +static DEVICE_ATTR(temp1_min_hyst, S_IRUGO, + show_temp_min_hyst, NULL); +static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, + show_temp_max_hyst, NULL); + +static DEVICE_ATTR(alarms, S_IRUGO, + show_alarms, NULL); + +static int lm77_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm77_detect); +} + +/* This function is called by i2c_detect */ +static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm77_data *data; + int err = 0; + const char *name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access lm77_{read,write}_value. */ + if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm77_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm77_driver; + new_client->flags = 0; + + /* Here comes the remaining detection. Since the LM77 has no + register dedicated to identification, we have to rely on the + following tricks: + + 1. the high 4 bits represent the sign and thus they should + always be the same + 2. the high 3 bits are unused in the configuration register + 3. addresses 0x06 and 0x07 return the last read value + 4. registers cycling over 8-address boundaries + + Word-sized registers are high-byte first. */ + if (kind < 0) { + int i, cur, conf, hyst, crit, min, max; + + /* addresses cycling */ + cur = i2c_smbus_read_word_data(new_client, 0); + conf = i2c_smbus_read_byte_data(new_client, 1); + hyst = i2c_smbus_read_word_data(new_client, 2); + crit = i2c_smbus_read_word_data(new_client, 3); + min = i2c_smbus_read_word_data(new_client, 4); + max = i2c_smbus_read_word_data(new_client, 5); + for (i = 8; i <= 0xff; i += 8) + if (i2c_smbus_read_byte_data(new_client, i + 1) != conf + || i2c_smbus_read_word_data(new_client, i + 2) != hyst + || i2c_smbus_read_word_data(new_client, i + 3) != crit + || i2c_smbus_read_word_data(new_client, i + 4) != min + || i2c_smbus_read_word_data(new_client, i + 5) != max) + goto exit_free; + + /* sign bits */ + if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0) + || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0) + || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0) + || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0) + || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0)) + goto exit_free; + + /* unused bits */ + if (conf & 0xe0) + goto exit_free; + + /* 0x06 and 0x07 return the last read value */ + cur = i2c_smbus_read_word_data(new_client, 0); + if (i2c_smbus_read_word_data(new_client, 6) != cur + || i2c_smbus_read_word_data(new_client, 7) != cur) + goto exit_free; + hyst = i2c_smbus_read_word_data(new_client, 2); + if (i2c_smbus_read_word_data(new_client, 6) != hyst + || i2c_smbus_read_word_data(new_client, 7) != hyst) + goto exit_free; + min = i2c_smbus_read_word_data(new_client, 4); + if (i2c_smbus_read_word_data(new_client, 6) != min + || i2c_smbus_read_word_data(new_client, 7) != min) + goto exit_free; + + } + + /* Determine the chip type - only one kind supported! */ + if (kind <= 0) + kind = lm77; + + if (kind == lm77) { + name = "lm77"; + } + + /* Fill in the remaining client fields and put it into the global list */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the LM77 chip */ + lm77_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int lm77_detach_client(struct i2c_client *client) +{ + i2c_detach_client(client); + kfree(i2c_get_clientdata(client)); + return 0; +} + +/* All registers are word-sized, except for the configuration register. + The LM77 uses the high-byte first convention. */ +static u16 lm77_read_value(struct i2c_client *client, u8 reg) +{ + if (reg == LM77_REG_CONF) + return i2c_smbus_read_byte_data(client, reg); + else + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if (reg == LM77_REG_CONF) + return i2c_smbus_write_byte_data(client, reg, value); + else + return i2c_smbus_write_word_data(client, reg, swab16(value)); +} + +static void lm77_init_client(struct i2c_client *client) +{ + /* Initialize the LM77 chip - turn off shutdown mode */ + int conf = lm77_read_value(client, LM77_REG_CONF); + if (conf & 1) + lm77_write_value(client, LM77_REG_CONF, conf & 0xfe); +} + +static struct lm77_data *lm77_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm77_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting lm77 update\n"); + data->temp_input = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP)); + data->temp_hyst = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_HYST)); + data->temp_crit = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_CRIT)); + data->temp_min = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_MIN)); + data->temp_max = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_MAX)); + data->alarms = + lm77_read_value(client, LM77_REG_TEMP) & 0x0007; + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm77_init(void) +{ + return i2c_add_driver(&lm77_driver); +} + +static void __exit sensors_lm77_exit(void) +{ + i2c_del_driver(&lm77_driver); +} + +MODULE_AUTHOR("Andras BALI <drewie@freemail.hu>"); +MODULE_DESCRIPTION("LM77 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm77_init); +module_exit(sensors_lm77_exit); diff --git a/drivers/i2c/chips/lm78.c b/drivers/i2c/chips/lm78.c new file mode 100644 index 000000000000..6d52d14eb31c --- /dev/null +++ b/drivers/i2c/chips/lm78.c @@ -0,0 +1,796 @@ +/* + lm78.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <asm/io.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, + 0x25, 0x26, 0x27, 0x28, 0x29, + 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, + 0x2f, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_3(lm78, lm78j, lm79); + +/* Many LM78 constants specified below */ + +/* Length of ISA address segment */ +#define LM78_EXTENT 8 + +/* Where are the ISA address/data registers relative to the base address */ +#define LM78_ADDR_REG_OFFSET 5 +#define LM78_DATA_REG_OFFSET 6 + +/* The LM78 registers */ +#define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2) +#define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2) +#define LM78_REG_IN(nr) (0x20 + (nr)) + +#define LM78_REG_FAN_MIN(nr) (0x3b + (nr)) +#define LM78_REG_FAN(nr) (0x28 + (nr)) + +#define LM78_REG_TEMP 0x27 +#define LM78_REG_TEMP_OVER 0x39 +#define LM78_REG_TEMP_HYST 0x3a + +#define LM78_REG_ALARM1 0x41 +#define LM78_REG_ALARM2 0x42 + +#define LM78_REG_VID_FANDIV 0x47 + +#define LM78_REG_CONFIG 0x40 +#define LM78_REG_CHIPID 0x49 +#define LM78_REG_I2C_ADDR 0x48 + + +/* Conversions. Rounding and limit checking is only done on the TO_REG + variants. */ + +/* IN: mV, (0V to 4.08V) + REG: 16mV/bit */ +static inline u8 IN_TO_REG(unsigned long val) +{ + unsigned long nval = SENSORS_LIMIT(val, 0, 4080); + return (nval + 8) / 16; +} +#define IN_FROM_REG(val) ((val) * 16) + +static inline u8 FAN_TO_REG(long rpm, int div) +{ + if (rpm <= 0) + return 255; + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +static inline int FAN_FROM_REG(u8 val, int div) +{ + return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); +} + +/* TEMP: mC (-128C to +127C) + REG: 1C/bit, two's complement */ +static inline s8 TEMP_TO_REG(int val) +{ + int nval = SENSORS_LIMIT(val, -128000, 127000) ; + return nval<0 ? (nval-500)/1000 : (nval+500)/1000; +} + +static inline int TEMP_FROM_REG(s8 val) +{ + return val * 1000; +} + +/* VID: mV + REG: (see doc/vid) */ +static inline int VID_FROM_REG(u8 val) +{ + return val==0x1f ? 0 : val>=0x10 ? 5100-val*100 : 2050-val*50; +} + +#define DIV_FROM_REG(val) (1 << (val)) + +/* There are some complications in a module like this. First off, LM78 chips + may be both present on the SMBus and the ISA bus, and we have to handle + those cases separately at some places. Second, there might be several + LM78 chips available (well, actually, that is probably never done; but + it is a clean illustration of how to handle a case like that). Finally, + a specific chip may be attached to *both* ISA and SMBus, and we would + not like to detect it double. Fortunately, in the case of the LM78 at + least, a register tells us what SMBus address we are on, so that helps + a bit - except if there could be more than one SMBus. Groan. No solution + for this yet. */ + +/* This module may seem overly long and complicated. In fact, it is not so + bad. Quite a lot of bookkeeping is done. A real driver can often cut + some corners. */ + +/* For each registered LM78, we need to keep some data in memory. That + data is pointed to by lm78_list[NR]->data. The structure itself is + dynamically allocated, at the same time when a new lm78 client is + allocated. */ +struct lm78_data { + struct i2c_client client; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 in[7]; /* Register value */ + u8 in_max[7]; /* Register value */ + u8 in_min[7]; /* Register value */ + u8 fan[3]; /* Register value */ + u8 fan_min[3]; /* Register value */ + s8 temp; /* Register value */ + s8 temp_over; /* Register value */ + s8 temp_hyst; /* Register value */ + u8 fan_div[3]; /* Register encoding, shifted right */ + u8 vid; /* Register encoding, combined */ + u16 alarms; /* Register encoding, combined */ +}; + + +static int lm78_attach_adapter(struct i2c_adapter *adapter); +static int lm78_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm78_detach_client(struct i2c_client *client); + +static int lm78_read_value(struct i2c_client *client, u8 register); +static int lm78_write_value(struct i2c_client *client, u8 register, u8 value); +static struct lm78_data *lm78_update_device(struct device *dev); +static void lm78_init_client(struct i2c_client *client); + + +static struct i2c_driver lm78_driver = { + .owner = THIS_MODULE, + .name = "lm78", + .id = I2C_DRIVERID_LM78, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm78_attach_adapter, + .detach_client = lm78_detach_client, +}; + +/* 7 Voltages */ +static ssize_t show_in(struct device *dev, char *buf, int nr) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); +} + +static ssize_t show_in_min(struct device *dev, char *buf, int nr) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); +} + +static ssize_t show_in_max(struct device *dev, char *buf, int nr) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); +} + +static ssize_t set_in_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm78_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val); + lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]); + up(&data->update_lock); + return count; +} + +static ssize_t set_in_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm78_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val); + lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]); + up(&data->update_lock); + return count; +} + +#define show_in_offset(offset) \ +static ssize_t \ + show_in##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in##offset, NULL); \ +static ssize_t \ + show_in##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t \ + show_in##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t set_in##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t set_in##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); + +show_in_offset(0); +show_in_offset(1); +show_in_offset(2); +show_in_offset(3); +show_in_offset(4); +show_in_offset(5); +show_in_offset(6); + +/* Temperature */ +static ssize_t show_temp(struct device *dev, char *buf) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); +} + +static ssize_t show_temp_over(struct device *dev, char *buf) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); +} + +static ssize_t set_temp_over(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm78_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_over = TEMP_TO_REG(val); + lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over); + up(&data->update_lock); + return count; +} + +static ssize_t show_temp_hyst(struct device *dev, char *buf) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); +} + +static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm78_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_hyst = TEMP_TO_REG(val); + lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, + show_temp_over, set_temp_over); +static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst); + +/* 3 Fans */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], + DIV_FROM_REG(data->fan_div[nr])) ); +} + +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])) ); +} + +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm78_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + return count; +} + +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) ); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least suprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm78_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + unsigned long min; + u8 reg; + + down(&data->update_lock); + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + + switch (val) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + dev_err(&client->dev, "fan_div value %ld not " + "supported. Choose one of 1, 2, 4 or 8!\n", val); + up(&data->update_lock); + return -EINVAL; + } + + reg = lm78_read_value(client, LM78_REG_VID_FANDIV); + switch (nr) { + case 0: + reg = (reg & 0xcf) | (data->fan_div[nr] << 4); + break; + case 1: + reg = (reg & 0x3f) | (data->fan_div[nr] << 6); + break; + } + lm78_write_value(client, LM78_REG_VID_FANDIV, reg); + + data->fan_min[nr] = + FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + + return count; +} + +#define show_fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); + +static ssize_t set_fan_1_div(struct device *dev, const char *buf, + size_t count) +{ + return set_fan_div(dev, buf, count, 0) ; +} + +static ssize_t set_fan_2_div(struct device *dev, const char *buf, + size_t count) +{ + return set_fan_div(dev, buf, count, 1) ; +} + +show_fan_offset(1); +show_fan_offset(2); +show_fan_offset(3); + +/* Fan 3 divisor is locked in H/W */ +static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, + show_fan_1_div, set_fan_1_div); +static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, + show_fan_2_div, set_fan_2_div); +static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL); + +/* VID */ +static ssize_t show_vid(struct device *dev, char *buf) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%d\n", VID_FROM_REG(data->vid)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); + +/* Alarms */ +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct lm78_data *data = lm78_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* This function is called when: + * lm78_driver is inserted (when this module is loaded), for each + available adapter + * when a new adapter is inserted (and lm78_driver is still present) */ +static int lm78_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm78_detect); +} + +/* This function is called by i2c_detect */ +int lm78_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i, err; + struct i2c_client *new_client; + struct lm78_data *data; + const char *client_name = ""; + int is_isa = i2c_is_isa_adapter(adapter); + + if (!is_isa && + !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + err = -ENODEV; + goto ERROR0; + } + + /* Reserve the ISA region */ + if (is_isa) + if (!request_region(address, LM78_EXTENT, lm78_driver.name)) { + err = -EBUSY; + goto ERROR0; + } + + /* Probe whether there is anything available on this address. Already + done for SMBus clients */ + if (kind < 0) { + if (is_isa) { + +#define REALLY_SLOW_IO + /* We need the timeouts for at least some LM78-like + chips. But only if we read 'undefined' registers. */ + i = inb_p(address + 1); + if (inb_p(address + 2) != i) { + err = -ENODEV; + goto ERROR1; + } + if (inb_p(address + 3) != i) { + err = -ENODEV; + goto ERROR1; + } + if (inb_p(address + 7) != i) { + err = -ENODEV; + goto ERROR1; + } +#undef REALLY_SLOW_IO + + /* Let's just hope nothing breaks here */ + i = inb_p(address + 5) & 0x7f; + outb_p(~i & 0x7f, address + 5); + if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { + outb_p(i, address + 5); + err = -ENODEV; + goto ERROR1; + } + } + } + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access lm78_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR1; + } + memset(data, 0, sizeof(struct lm78_data)); + + new_client = &data->client; + if (is_isa) + init_MUTEX(&data->lock); + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm78_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + if (kind < 0) { + if (lm78_read_value(new_client, LM78_REG_CONFIG) & 0x80) { + err = -ENODEV; + goto ERROR2; + } + if (!is_isa && (lm78_read_value( + new_client, LM78_REG_I2C_ADDR) != address)) { + err = -ENODEV; + goto ERROR2; + } + } + + /* Determine the chip type. */ + if (kind <= 0) { + i = lm78_read_value(new_client, LM78_REG_CHIPID); + if (i == 0x00 || i == 0x20) + kind = lm78; + else if (i == 0x40) + kind = lm78j; + else if ((i & 0xfe) == 0xc0) + kind = lm79; + else { + if (kind == 0) + dev_warn(&adapter->dev, "Ignoring 'force' " + "parameter for unknown chip at " + "adapter %d, address 0x%02x\n", + i2c_adapter_id(adapter), address); + err = -ENODEV; + goto ERROR2; + } + } + + if (kind == lm78) { + client_name = "lm78"; + } else if (kind == lm78j) { + client_name = "lm78-j"; + } else if (kind == lm79) { + client_name = "lm79"; + } + + /* Fill in the remaining client fields and put into the global list */ + strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + data->type = kind; + + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR2; + + /* Initialize the LM78 chip */ + lm78_init_client(new_client); + + /* A few vars need to be filled upon startup */ + for (i = 0; i < 3; i++) { + data->fan_min[i] = lm78_read_value(new_client, + LM78_REG_FAN_MIN(i)); + } + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in5_max); + device_create_file(&new_client->dev, &dev_attr_in6_input); + device_create_file(&new_client->dev, &dev_attr_in6_min); + device_create_file(&new_client->dev, &dev_attr_in6_max); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_fan3_input); + device_create_file(&new_client->dev, &dev_attr_fan3_min); + device_create_file(&new_client->dev, &dev_attr_fan3_div); + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_cpu0_vid); + + return 0; + +ERROR2: + kfree(data); +ERROR1: + if (is_isa) + release_region(address, LM78_EXTENT); +ERROR0: + return err; +} + +static int lm78_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + if(i2c_is_isa_client(client)) + release_region(client->addr, LM78_EXTENT); + + kfree(i2c_get_clientdata(client)); + + return 0; +} + +/* The SMBus locks itself, but ISA access must be locked explicitely! + We don't want to lock the whole ISA bus, so we lock each client + separately. + We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, + would slow down the LM78 access and should not be necessary. */ +static int lm78_read_value(struct i2c_client *client, u8 reg) +{ + int res; + if (i2c_is_isa_client(client)) { + struct lm78_data *data = i2c_get_clientdata(client); + down(&data->lock); + outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); + res = inb_p(client->addr + LM78_DATA_REG_OFFSET); + up(&data->lock); + return res; + } else + return i2c_smbus_read_byte_data(client, reg); +} + +/* The SMBus locks itself, but ISA access muse be locked explicitely! + We don't want to lock the whole ISA bus, so we lock each client + separately. + We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, + would slow down the LM78 access and should not be necessary. + There are some ugly typecasts here, but the good new is - they should + nowhere else be necessary! */ +static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + if (i2c_is_isa_client(client)) { + struct lm78_data *data = i2c_get_clientdata(client); + down(&data->lock); + outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); + outb_p(value, client->addr + LM78_DATA_REG_OFFSET); + up(&data->lock); + return 0; + } else + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* Called when we have found a new LM78. It should set limits, etc. */ +static void lm78_init_client(struct i2c_client *client) +{ + u8 config = lm78_read_value(client, LM78_REG_CONFIG); + + /* Start monitoring */ + if (!(config & 0x01)) + lm78_write_value(client, LM78_REG_CONFIG, + (config & 0xf7) | 0x01); +} + +static struct lm78_data *lm78_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm78_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + + dev_dbg(&client->dev, "Starting lm78 update\n"); + + for (i = 0; i <= 6; i++) { + data->in[i] = + lm78_read_value(client, LM78_REG_IN(i)); + data->in_min[i] = + lm78_read_value(client, LM78_REG_IN_MIN(i)); + data->in_max[i] = + lm78_read_value(client, LM78_REG_IN_MAX(i)); + } + for (i = 0; i < 3; i++) { + data->fan[i] = + lm78_read_value(client, LM78_REG_FAN(i)); + data->fan_min[i] = + lm78_read_value(client, LM78_REG_FAN_MIN(i)); + } + data->temp = lm78_read_value(client, LM78_REG_TEMP); + data->temp_over = + lm78_read_value(client, LM78_REG_TEMP_OVER); + data->temp_hyst = + lm78_read_value(client, LM78_REG_TEMP_HYST); + i = lm78_read_value(client, LM78_REG_VID_FANDIV); + data->vid = i & 0x0f; + if (data->type == lm79) + data->vid |= + (lm78_read_value(client, LM78_REG_CHIPID) & + 0x01) << 4; + else + data->vid |= 0x10; + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = i >> 6; + data->alarms = lm78_read_value(client, LM78_REG_ALARM1) + + (lm78_read_value(client, LM78_REG_ALARM2) << 8); + data->last_updated = jiffies; + data->valid = 1; + + data->fan_div[2] = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sm_lm78_init(void) +{ + return i2c_add_driver(&lm78_driver); +} + +static void __exit sm_lm78_exit(void) +{ + i2c_del_driver(&lm78_driver); +} + + + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver"); +MODULE_LICENSE("GPL"); + +module_init(sm_lm78_init); +module_exit(sm_lm78_exit); diff --git a/drivers/i2c/chips/lm80.c b/drivers/i2c/chips/lm80.c new file mode 100644 index 000000000000..a72f431971bb --- /dev/null +++ b/drivers/i2c/chips/lm80.c @@ -0,0 +1,602 @@ +/* + * lm80.c - From lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + * and Philip Edelbrock <phil@netroedge.com> + * + * Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, + 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(lm80); + +/* Many LM80 constants specified below */ + +/* The LM80 registers */ +#define LM80_REG_IN_MAX(nr) (0x2a + (nr) * 2) +#define LM80_REG_IN_MIN(nr) (0x2b + (nr) * 2) +#define LM80_REG_IN(nr) (0x20 + (nr)) + +#define LM80_REG_FAN1 0x28 +#define LM80_REG_FAN2 0x29 +#define LM80_REG_FAN_MIN(nr) (0x3b + (nr)) + +#define LM80_REG_TEMP 0x27 +#define LM80_REG_TEMP_HOT_MAX 0x38 +#define LM80_REG_TEMP_HOT_HYST 0x39 +#define LM80_REG_TEMP_OS_MAX 0x3a +#define LM80_REG_TEMP_OS_HYST 0x3b + +#define LM80_REG_CONFIG 0x00 +#define LM80_REG_ALARM1 0x01 +#define LM80_REG_ALARM2 0x02 +#define LM80_REG_MASK1 0x03 +#define LM80_REG_MASK2 0x04 +#define LM80_REG_FANDIV 0x05 +#define LM80_REG_RES 0x06 + + +/* Conversions. Rounding and limit checking is only done on the TO_REG + variants. Note that you should be a bit careful with which arguments + these macros are called: arguments may be evaluated more than once. + Fixing this is just not worth it. */ + +#define IN_TO_REG(val) (SENSORS_LIMIT(((val)+5)/10,0,255)) +#define IN_FROM_REG(val) ((val)*10) + +static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div) +{ + if (rpm == 0) + return 255; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254); +} + +#define FAN_FROM_REG(val,div) ((val)==0?-1:\ + (val)==255?0:1350000/((div)*(val))) + +static inline long TEMP_FROM_REG(u16 temp) +{ + long res; + + temp >>= 4; + if (temp < 0x0800) + res = 625 * (long) temp; + else + res = ((long) temp - 0x01000) * 625; + + return res / 10; +} + +#define TEMP_LIMIT_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) + +#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val)<0?\ + ((val)-500)/1000:((val)+500)/1000,0,255) + +#define DIV_FROM_REG(val) (1 << (val)) + +/* + * Client data (each client gets its own) + */ + +struct lm80_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 in[7]; /* Register value */ + u8 in_max[7]; /* Register value */ + u8 in_min[7]; /* Register value */ + u8 fan[2]; /* Register value */ + u8 fan_min[2]; /* Register value */ + u8 fan_div[2]; /* Register encoding, shifted right */ + u16 temp; /* Register values, shifted right */ + u8 temp_hot_max; /* Register value */ + u8 temp_hot_hyst; /* Register value */ + u8 temp_os_max; /* Register value */ + u8 temp_os_hyst; /* Register value */ + u16 alarms; /* Register encoding, combined */ +}; + +/* + * Functions declaration + */ + +static int lm80_attach_adapter(struct i2c_adapter *adapter); +static int lm80_detect(struct i2c_adapter *adapter, int address, int kind); +static void lm80_init_client(struct i2c_client *client); +static int lm80_detach_client(struct i2c_client *client); +static struct lm80_data *lm80_update_device(struct device *dev); +static int lm80_read_value(struct i2c_client *client, u8 reg); +static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver lm80_driver = { + .owner = THIS_MODULE, + .name = "lm80", + .id = I2C_DRIVERID_LM80, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm80_attach_adapter, + .detach_client = lm80_detach_client, +}; + +/* + * Sysfs stuff + */ + +#define show_in(suffix, value) \ +static ssize_t show_in_##suffix(struct device *dev, char *buf) \ +{ \ + struct lm80_data *data = lm80_update_device(dev); \ + return sprintf(buf, "%d\n", IN_FROM_REG(data->value)); \ +} +show_in(min0, in_min[0]); +show_in(min1, in_min[1]); +show_in(min2, in_min[2]); +show_in(min3, in_min[3]); +show_in(min4, in_min[4]); +show_in(min5, in_min[5]); +show_in(min6, in_min[6]); +show_in(max0, in_max[0]); +show_in(max1, in_max[1]); +show_in(max2, in_max[2]); +show_in(max3, in_max[3]); +show_in(max4, in_max[4]); +show_in(max5, in_max[5]); +show_in(max6, in_max[6]); +show_in(input0, in[0]); +show_in(input1, in[1]); +show_in(input2, in[2]); +show_in(input3, in[3]); +show_in(input4, in[4]); +show_in(input5, in[5]); +show_in(input6, in[6]); + +#define set_in(suffix, value, reg) \ +static ssize_t set_in_##suffix(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm80_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock);\ + data->value = IN_TO_REG(val); \ + lm80_write_value(client, reg, data->value); \ + up(&data->update_lock);\ + return count; \ +} +set_in(min0, in_min[0], LM80_REG_IN_MIN(0)); +set_in(min1, in_min[1], LM80_REG_IN_MIN(1)); +set_in(min2, in_min[2], LM80_REG_IN_MIN(2)); +set_in(min3, in_min[3], LM80_REG_IN_MIN(3)); +set_in(min4, in_min[4], LM80_REG_IN_MIN(4)); +set_in(min5, in_min[5], LM80_REG_IN_MIN(5)); +set_in(min6, in_min[6], LM80_REG_IN_MIN(6)); +set_in(max0, in_max[0], LM80_REG_IN_MAX(0)); +set_in(max1, in_max[1], LM80_REG_IN_MAX(1)); +set_in(max2, in_max[2], LM80_REG_IN_MAX(2)); +set_in(max3, in_max[3], LM80_REG_IN_MAX(3)); +set_in(max4, in_max[4], LM80_REG_IN_MAX(4)); +set_in(max5, in_max[5], LM80_REG_IN_MAX(5)); +set_in(max6, in_max[6], LM80_REG_IN_MAX(6)); + +#define show_fan(suffix, value, div) \ +static ssize_t show_fan_##suffix(struct device *dev, char *buf) \ +{ \ + struct lm80_data *data = lm80_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->value, \ + DIV_FROM_REG(data->div))); \ +} +show_fan(min1, fan_min[0], fan_div[0]); +show_fan(min2, fan_min[1], fan_div[1]); +show_fan(input1, fan[0], fan_div[0]); +show_fan(input2, fan[1], fan_div[1]); + +#define show_fan_div(suffix, value) \ +static ssize_t show_fan_div##suffix(struct device *dev, char *buf) \ +{ \ + struct lm80_data *data = lm80_update_device(dev); \ + return sprintf(buf, "%d\n", DIV_FROM_REG(data->value)); \ +} +show_fan_div(1, fan_div[0]); +show_fan_div(2, fan_div[1]); + +#define set_fan(suffix, value, reg, div) \ +static ssize_t set_fan_##suffix(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm80_data *data = i2c_get_clientdata(client); \ + long val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock);\ + data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \ + lm80_write_value(client, reg, data->value); \ + up(&data->update_lock);\ + return count; \ +} +set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]); +set_fan(min2, fan_min[1], LM80_REG_FAN_MIN(2), fan_div[1]); + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least suprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm80_data *data = i2c_get_clientdata(client); + unsigned long min, val = simple_strtoul(buf, NULL, 10); + u8 reg; + + /* Save fan_min */ + down(&data->update_lock); + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + + switch (val) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + dev_err(&client->dev, "fan_div value %ld not " + "supported. Choose one of 1, 2, 4 or 8!\n", val); + up(&data->update_lock); + return -EINVAL; + } + + reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1)))) + | (data->fan_div[nr] << (2 * (nr + 1))); + lm80_write_value(client, LM80_REG_FANDIV, reg); + + /* Restore fan_min */ + data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]); + up(&data->update_lock); + + return count; +} + +#define set_fan_div(number) \ +static ssize_t set_fan_div##number(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return set_fan_div(dev, buf, count, number - 1); \ +} +set_fan_div(1); +set_fan_div(2); + +static ssize_t show_temp_input1(struct device *dev, char *buf) +{ + struct lm80_data *data = lm80_update_device(dev); + return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp)); +} + +#define show_temp(suffix, value) \ +static ssize_t show_temp_##suffix(struct device *dev, char *buf) \ +{ \ + struct lm80_data *data = lm80_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \ +} +show_temp(hot_max, temp_hot_max); +show_temp(hot_hyst, temp_hot_hyst); +show_temp(os_max, temp_os_max); +show_temp(os_hyst, temp_os_hyst); + +#define set_temp(suffix, value, reg) \ +static ssize_t set_temp_##suffix(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm80_data *data = i2c_get_clientdata(client); \ + long val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP_LIMIT_TO_REG(val); \ + lm80_write_value(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} +set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX); +set_temp(hot_hyst, temp_hot_hyst, LM80_REG_TEMP_HOT_HYST); +set_temp(os_max, temp_os_max, LM80_REG_TEMP_OS_MAX); +set_temp(os_hyst, temp_os_hyst, LM80_REG_TEMP_OS_HYST); + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct lm80_data *data = lm80_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} + +static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0); +static DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min1, set_in_min1); +static DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min2, set_in_min2); +static DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min3, set_in_min3); +static DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min4, set_in_min4); +static DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min5, set_in_min5); +static DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min6, set_in_min6); +static DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max0, set_in_max0); +static DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max1, set_in_max1); +static DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max2, set_in_max2); +static DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max3, set_in_max3); +static DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max4, set_in_max4); +static DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max5, set_in_max5); +static DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max6, set_in_max6); +static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL); +static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL); +static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL); +static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL); +static DEVICE_ATTR(in4_input, S_IRUGO, show_in_input4, NULL); +static DEVICE_ATTR(in5_input, S_IRUGO, show_in_input5, NULL); +static DEVICE_ATTR(in6_input, S_IRUGO, show_in_input6, NULL); +static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min1, + set_fan_min1); +static DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min2, + set_fan_min2); +static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL); +static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL); +static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div1, set_fan_div1); +static DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div2, set_fan_div2); +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max, + set_temp_hot_max); +static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst, + set_temp_hot_hyst); +static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max, + set_temp_os_max); +static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst, + set_temp_os_hyst); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* + * Real code + */ + +static int lm80_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm80_detect); +} + +int lm80_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i, cur; + struct i2c_client *new_client; + struct lm80_data *data; + int err = 0; + const char *name; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access lm80_{read,write}_value. */ + if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm80_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm80_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. It is lousy. */ + if (lm80_read_value(new_client, LM80_REG_ALARM2) & 0xc0) + goto error_free; + for (i = 0x2a; i <= 0x3d; i++) { + cur = i2c_smbus_read_byte_data(new_client, i); + if ((i2c_smbus_read_byte_data(new_client, i + 0x40) != cur) + || (i2c_smbus_read_byte_data(new_client, i + 0x80) != cur) + || (i2c_smbus_read_byte_data(new_client, i + 0xc0) != cur)) + goto error_free; + } + + /* Determine the chip type - only one kind supported! */ + kind = lm80; + name = "lm80"; + + /* Fill in the remaining client fields and put it into the global list */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto error_free; + + /* Initialize the LM80 chip */ + lm80_init_client(new_client); + + /* A few vars need to be filled upon startup */ + data->fan_min[0] = lm80_read_value(new_client, LM80_REG_FAN_MIN(1)); + data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2)); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in6_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_in5_max); + device_create_file(&new_client->dev, &dev_attr_in6_max); + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in6_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +error_free: + kfree(data); +exit: + return err; +} + +static int lm80_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static int lm80_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* Called when we have found a new LM80. */ +static void lm80_init_client(struct i2c_client *client) +{ + /* Reset all except Watchdog values and last conversion values + This sets fan-divs to 2, among others. This makes most other + initializations unnecessary */ + lm80_write_value(client, LM80_REG_CONFIG, 0x80); + /* Set 11-bit temperature resolution */ + lm80_write_value(client, LM80_REG_RES, 0x08); + + /* Start monitoring */ + lm80_write_value(client, LM80_REG_CONFIG, 0x01); +} + +static struct lm80_data *lm80_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm80_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { + dev_dbg(&client->dev, "Starting lm80 update\n"); + for (i = 0; i <= 6; i++) { + data->in[i] = + lm80_read_value(client, LM80_REG_IN(i)); + data->in_min[i] = + lm80_read_value(client, LM80_REG_IN_MIN(i)); + data->in_max[i] = + lm80_read_value(client, LM80_REG_IN_MAX(i)); + } + data->fan[0] = lm80_read_value(client, LM80_REG_FAN1); + data->fan_min[0] = + lm80_read_value(client, LM80_REG_FAN_MIN(1)); + data->fan[1] = lm80_read_value(client, LM80_REG_FAN2); + data->fan_min[1] = + lm80_read_value(client, LM80_REG_FAN_MIN(2)); + + data->temp = + (lm80_read_value(client, LM80_REG_TEMP) << 8) | + (lm80_read_value(client, LM80_REG_RES) & 0xf0); + data->temp_os_max = + lm80_read_value(client, LM80_REG_TEMP_OS_MAX); + data->temp_os_hyst = + lm80_read_value(client, LM80_REG_TEMP_OS_HYST); + data->temp_hot_max = + lm80_read_value(client, LM80_REG_TEMP_HOT_MAX); + data->temp_hot_hyst = + lm80_read_value(client, LM80_REG_TEMP_HOT_HYST); + + i = lm80_read_value(client, LM80_REG_FANDIV); + data->fan_div[0] = (i >> 2) & 0x03; + data->fan_div[1] = (i >> 4) & 0x03; + data->alarms = lm80_read_value(client, LM80_REG_ALARM1) + + (lm80_read_value(client, LM80_REG_ALARM2) << 8); + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm80_init(void) +{ + return i2c_add_driver(&lm80_driver); +} + +static void __exit sensors_lm80_exit(void) +{ + i2c_del_driver(&lm80_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " + "Philip Edelbrock <phil@netroedge.com>"); +MODULE_DESCRIPTION("LM80 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm80_init); +module_exit(sensors_lm80_exit); diff --git a/drivers/i2c/chips/lm83.c b/drivers/i2c/chips/lm83.c new file mode 100644 index 000000000000..3dafe60766ad --- /dev/null +++ b/drivers/i2c/chips/lm83.c @@ -0,0 +1,412 @@ +/* + * lm83.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 2003 Jean Delvare <khali@linux-fr.org> + * + * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is + * a sensor chip made by National Semiconductor. It reports up to four + * temperatures (its own plus up to three external ones) with a 1 deg + * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained + * from National's website at: + * http://www.national.com/pf/LM/LM83.html + * Since the datasheet omits to give the chip stepping code, I give it + * here: 0x03 (at register 0xff). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* + * Addresses to scan + * Address is selected using 2 three-level pins, resulting in 9 possible + * addresses. + */ + +static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, + 0x29, 0x2a, 0x2b, + 0x4c, 0x4d, 0x4e, + I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(lm83); + +/* + * The LM83 registers + * Manufacturer ID is 0x01 for National Semiconductor. + */ + +#define LM83_REG_R_MAN_ID 0xFE +#define LM83_REG_R_CHIP_ID 0xFF +#define LM83_REG_R_CONFIG 0x03 +#define LM83_REG_W_CONFIG 0x09 +#define LM83_REG_R_STATUS1 0x02 +#define LM83_REG_R_STATUS2 0x35 +#define LM83_REG_R_LOCAL_TEMP 0x00 +#define LM83_REG_R_LOCAL_HIGH 0x05 +#define LM83_REG_W_LOCAL_HIGH 0x0B +#define LM83_REG_R_REMOTE1_TEMP 0x30 +#define LM83_REG_R_REMOTE1_HIGH 0x38 +#define LM83_REG_W_REMOTE1_HIGH 0x50 +#define LM83_REG_R_REMOTE2_TEMP 0x01 +#define LM83_REG_R_REMOTE2_HIGH 0x07 +#define LM83_REG_W_REMOTE2_HIGH 0x0D +#define LM83_REG_R_REMOTE3_TEMP 0x31 +#define LM83_REG_R_REMOTE3_HIGH 0x3A +#define LM83_REG_W_REMOTE3_HIGH 0x52 +#define LM83_REG_R_TCRIT 0x42 +#define LM83_REG_W_TCRIT 0x5A + +/* + * Conversions and various macros + * The LM83 uses signed 8-bit values with LSB = 1 degree Celcius. + */ + +#define TEMP_FROM_REG(val) ((val) * 1000) +#define TEMP_TO_REG(val) ((val) <= -128000 ? -128 : \ + (val) >= 127000 ? 127 : \ + (val) < 0 ? ((val) - 500) / 1000 : \ + ((val) + 500) / 1000) + +static const u8 LM83_REG_R_TEMP[] = { + LM83_REG_R_LOCAL_TEMP, + LM83_REG_R_REMOTE1_TEMP, + LM83_REG_R_REMOTE2_TEMP, + LM83_REG_R_REMOTE3_TEMP +}; + +static const u8 LM83_REG_R_HIGH[] = { + LM83_REG_R_LOCAL_HIGH, + LM83_REG_R_REMOTE1_HIGH, + LM83_REG_R_REMOTE2_HIGH, + LM83_REG_R_REMOTE3_HIGH +}; + +static const u8 LM83_REG_W_HIGH[] = { + LM83_REG_W_LOCAL_HIGH, + LM83_REG_W_REMOTE1_HIGH, + LM83_REG_W_REMOTE2_HIGH, + LM83_REG_W_REMOTE3_HIGH +}; + +/* + * Functions declaration + */ + +static int lm83_attach_adapter(struct i2c_adapter *adapter); +static int lm83_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm83_detach_client(struct i2c_client *client); +static struct lm83_data *lm83_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver lm83_driver = { + .owner = THIS_MODULE, + .name = "lm83", + .id = I2C_DRIVERID_LM83, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm83_attach_adapter, + .detach_client = lm83_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct lm83_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + s8 temp_input[4]; + s8 temp_high[4]; + s8 temp_crit; + u16 alarms; /* bitvector, combined */ +}; + +/* + * Sysfs stuff + */ + +#define show_temp(suffix, value) \ +static ssize_t show_temp_##suffix(struct device *dev, char *buf) \ +{ \ + struct lm83_data *data = lm83_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ +} +show_temp(input1, temp_input[0]); +show_temp(input2, temp_input[1]); +show_temp(input3, temp_input[2]); +show_temp(input4, temp_input[3]); +show_temp(high1, temp_high[0]); +show_temp(high2, temp_high[1]); +show_temp(high3, temp_high[2]); +show_temp(high4, temp_high[3]); +show_temp(crit, temp_crit); + +#define set_temp(suffix, value, reg) \ +static ssize_t set_temp_##suffix(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm83_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP_TO_REG(val); \ + i2c_smbus_write_byte_data(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} +set_temp(high1, temp_high[0], LM83_REG_W_LOCAL_HIGH); +set_temp(high2, temp_high[1], LM83_REG_W_REMOTE1_HIGH); +set_temp(high3, temp_high[2], LM83_REG_W_REMOTE2_HIGH); +set_temp(high4, temp_high[3], LM83_REG_W_REMOTE3_HIGH); +set_temp(crit, temp_crit, LM83_REG_W_TCRIT); + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct lm83_data *data = lm83_update_device(dev); + return sprintf(buf, "%d\n", data->alarms); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); +static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); +static DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_input3, NULL); +static DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_input4, NULL); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1, + set_temp_high1); +static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, + set_temp_high2); +static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_high3, + set_temp_high3); +static DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_high4, + set_temp_high4); +static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL); +static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL); +static DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp_crit, + set_temp_crit); +static DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* + * Real code + */ + +static int lm83_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm83_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm83_data *data; + int err = 0; + const char *name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm83_data)); + + /* The common I2C client data is placed right after the + * LM83-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm83_driver; + new_client->flags = 0; + + /* Now we do the detection and identification. A negative kind + * means that the driver was loaded with no force parameter + * (default), so we must both detect and identify the chip + * (actually there is only one possible kind of chip for now, LM83). + * A zero kind means that the driver was loaded with the force + * parameter, the detection step shall be skipped. A positive kind + * means that the driver was loaded with the force parameter and a + * given kind of chip is requested, so both the detection and the + * identification steps are skipped. */ + + /* Default to an LM83 if forced */ + if (kind == 0) + kind = lm83; + + if (kind < 0) { /* detection */ + if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) + & 0xA8) != 0x00) || + ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) + & 0x48) != 0x00) || + ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) + & 0x41) != 0x00)) { + dev_dbg(&adapter->dev, + "LM83 detection failed at 0x%02x.\n", address); + goto exit_free; + } + } + + if (kind <= 0) { /* identification */ + u8 man_id, chip_id; + + man_id = i2c_smbus_read_byte_data(new_client, + LM83_REG_R_MAN_ID); + chip_id = i2c_smbus_read_byte_data(new_client, + LM83_REG_R_CHIP_ID); + + if (man_id == 0x01) { /* National Semiconductor */ + if (chip_id == 0x03) { + kind = lm83; + } + } + + if (kind <= 0) { /* identification failed */ + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%02X, " + "chip_id=0x%02X).\n", man_id, chip_id); + goto exit_free; + } + } + + if (kind == lm83) { + name = "lm83"; + } + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* + * Initialize the LM83 chip + * (Nothing to do for this one.) + */ + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp4_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp4_max); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + device_create_file(&new_client->dev, &dev_attr_temp3_crit); + device_create_file(&new_client->dev, &dev_attr_temp4_crit); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int lm83_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct lm83_data *lm83_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm83_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { + int nr; + + dev_dbg(&client->dev, "Updating lm83 data.\n"); + for (nr = 0; nr < 4 ; nr++) { + data->temp_input[nr] = + i2c_smbus_read_byte_data(client, + LM83_REG_R_TEMP[nr]); + data->temp_high[nr] = + i2c_smbus_read_byte_data(client, + LM83_REG_R_HIGH[nr]); + } + data->temp_crit = + i2c_smbus_read_byte_data(client, LM83_REG_R_TCRIT); + data->alarms = + i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1) + + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2) + << 8); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm83_init(void) +{ + return i2c_add_driver(&lm83_driver); +} + +static void __exit sensors_lm83_exit(void) +{ + i2c_del_driver(&lm83_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("LM83 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm83_init); +module_exit(sensors_lm83_exit); diff --git a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c new file mode 100644 index 000000000000..b1a0dc5f6b34 --- /dev/null +++ b/drivers/i2c/chips/lm85.c @@ -0,0 +1,1578 @@ +/* + lm85.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> + Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de> + Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com> + + Chip details at <http://www.national.com/ds/LM/LM85.pdf> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); + +/* The LM85 registers */ + +#define LM85_REG_IN(nr) (0x20 + (nr)) +#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2) +#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2) + +#define LM85_REG_TEMP(nr) (0x25 + (nr)) +#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2) +#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2) + +/* Fan speeds are LSB, MSB (2 bytes) */ +#define LM85_REG_FAN(nr) (0x28 + (nr) *2) +#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) *2) + +#define LM85_REG_PWM(nr) (0x30 + (nr)) + +#define ADT7463_REG_OPPOINT(nr) (0x33 + (nr)) + +#define ADT7463_REG_TMIN_CTL1 0x36 +#define ADT7463_REG_TMIN_CTL2 0x37 + +#define LM85_REG_DEVICE 0x3d +#define LM85_REG_COMPANY 0x3e +#define LM85_REG_VERSTEP 0x3f +/* These are the recognized values for the above regs */ +#define LM85_DEVICE_ADX 0x27 +#define LM85_COMPANY_NATIONAL 0x01 +#define LM85_COMPANY_ANALOG_DEV 0x41 +#define LM85_COMPANY_SMSC 0x5c +#define LM85_VERSTEP_VMASK 0xf0 +#define LM85_VERSTEP_GENERIC 0x60 +#define LM85_VERSTEP_LM85C 0x60 +#define LM85_VERSTEP_LM85B 0x62 +#define LM85_VERSTEP_ADM1027 0x60 +#define LM85_VERSTEP_ADT7463 0x62 +#define LM85_VERSTEP_ADT7463C 0x6A +#define LM85_VERSTEP_EMC6D100_A0 0x60 +#define LM85_VERSTEP_EMC6D100_A1 0x61 +#define LM85_VERSTEP_EMC6D102 0x65 + +#define LM85_REG_CONFIG 0x40 + +#define LM85_REG_ALARM1 0x41 +#define LM85_REG_ALARM2 0x42 + +#define LM85_REG_VID 0x43 + +/* Automated FAN control */ +#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) +#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) +#define LM85_REG_AFAN_SPIKE1 0x62 +#define LM85_REG_AFAN_SPIKE2 0x63 +#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) +#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) +#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) +#define LM85_REG_AFAN_HYST1 0x6d +#define LM85_REG_AFAN_HYST2 0x6e + +#define LM85_REG_TACH_MODE 0x74 +#define LM85_REG_SPINUP_CTL 0x75 + +#define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr)) +#define ADM1027_REG_CONFIG2 0x73 +#define ADM1027_REG_INTMASK1 0x74 +#define ADM1027_REG_INTMASK2 0x75 +#define ADM1027_REG_EXTEND_ADC1 0x76 +#define ADM1027_REG_EXTEND_ADC2 0x77 +#define ADM1027_REG_CONFIG3 0x78 +#define ADM1027_REG_FAN_PPR 0x7b + +#define ADT7463_REG_THERM 0x79 +#define ADT7463_REG_THERM_LIMIT 0x7A + +#define EMC6D100_REG_ALARM3 0x7d +/* IN5, IN6 and IN7 */ +#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5)) +#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2) +#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2) +#define EMC6D102_REG_EXTEND_ADC1 0x85 +#define EMC6D102_REG_EXTEND_ADC2 0x86 +#define EMC6D102_REG_EXTEND_ADC3 0x87 +#define EMC6D102_REG_EXTEND_ADC4 0x88 + +#define LM85_ALARM_IN0 0x0001 +#define LM85_ALARM_IN1 0x0002 +#define LM85_ALARM_IN2 0x0004 +#define LM85_ALARM_IN3 0x0008 +#define LM85_ALARM_TEMP1 0x0010 +#define LM85_ALARM_TEMP2 0x0020 +#define LM85_ALARM_TEMP3 0x0040 +#define LM85_ALARM_ALARM2 0x0080 +#define LM85_ALARM_IN4 0x0100 +#define LM85_ALARM_RESERVED 0x0200 +#define LM85_ALARM_FAN1 0x0400 +#define LM85_ALARM_FAN2 0x0800 +#define LM85_ALARM_FAN3 0x1000 +#define LM85_ALARM_FAN4 0x2000 +#define LM85_ALARM_TEMP1_FAULT 0x4000 +#define LM85_ALARM_TEMP3_FAULT 0x8000 + + +/* Conversions. Rounding and limit checking is only done on the TO_REG + variants. Note that you should be a bit careful with which arguments + these macros are called: arguments may be evaluated more than once. + */ + +/* IN are scaled acording to built-in resistors */ +static int lm85_scaling[] = { /* .001 Volts */ + 2500, 2250, 3300, 5000, 12000, + 3300, 1500, 1800 /*EMC6D100*/ + }; +#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) + +#define INS_TO_REG(n,val) \ + SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255) + +#define INSEXT_FROM_REG(n,val,ext,scale) \ + SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n]) + +#define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1) + +/* FAN speed is measured using 90kHz clock */ +#define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534)) +#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val)) + +/* Temperature is reported in .001 degC increments */ +#define TEMP_TO_REG(val) \ + SENSORS_LIMIT(SCALE(val,1000,1),-127,127) +#define TEMPEXT_FROM_REG(val,ext,scale) \ + SCALE((val)*scale + (ext),scale,1000) +#define TEMP_FROM_REG(val) \ + TEMPEXT_FROM_REG(val,0,1) + +#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) +#define PWM_FROM_REG(val) (val) + + +/* ZONEs have the following parameters: + * Limit (low) temp, 1. degC + * Hysteresis (below limit), 1. degC (0-15) + * Range of speed control, .1 degC (2-80) + * Critical (high) temp, 1. degC + * + * FAN PWMs have the following parameters: + * Reference Zone, 1, 2, 3, etc. + * Spinup time, .05 sec + * PWM value at limit/low temp, 1 count + * PWM Frequency, 1. Hz + * PWM is Min or OFF below limit, flag + * Invert PWM output, flag + * + * Some chips filter the temp, others the fan. + * Filter constant (or disabled) .1 seconds + */ + +/* These are the zone temperature range encodings in .001 degree C */ +static int lm85_range_map[] = { + 2000, 2500, 3300, 4000, 5000, 6600, + 8000, 10000, 13300, 16000, 20000, 26600, + 32000, 40000, 53300, 80000 + }; +static int RANGE_TO_REG( int range ) +{ + int i; + + if ( range < lm85_range_map[0] ) { + return 0 ; + } else if ( range > lm85_range_map[15] ) { + return 15 ; + } else { /* find closest match */ + for ( i = 14 ; i >= 0 ; --i ) { + if ( range > lm85_range_map[i] ) { /* range bracketed */ + if ((lm85_range_map[i+1] - range) < + (range - lm85_range_map[i])) { + i++; + break; + } + break; + } + } + } + return( i & 0x0f ); +} +#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) + +/* These are the Acoustic Enhancement, or Temperature smoothing encodings + * NOTE: The enable/disable bit is INCLUDED in these encodings as the + * MSB (bit 3, value 8). If the enable bit is 0, the encoded value + * is ignored, or set to 0. + */ +/* These are the PWM frequency encodings */ +static int lm85_freq_map[] = { /* .1 Hz */ + 100, 150, 230, 300, 380, 470, 620, 940 + }; +static int FREQ_TO_REG( int freq ) +{ + int i; + + if( freq >= lm85_freq_map[7] ) { return 7 ; } + for( i = 0 ; i < 7 ; ++i ) + if( freq <= lm85_freq_map[i] ) + break ; + return( i & 0x07 ); +} +#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07]) + +/* Since we can't use strings, I'm abusing these numbers + * to stand in for the following meanings: + * 1 -- PWM responds to Zone 1 + * 2 -- PWM responds to Zone 2 + * 3 -- PWM responds to Zone 3 + * 23 -- PWM responds to the higher temp of Zone 2 or 3 + * 123 -- PWM responds to highest of Zone 1, 2, or 3 + * 0 -- PWM is always at 0% (ie, off) + * -1 -- PWM is always at 100% + * -2 -- PWM responds to manual control + */ + +static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; +#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07]) + +static int ZONE_TO_REG( int zone ) +{ + int i; + + for( i = 0 ; i <= 7 ; ++i ) + if( zone == lm85_zone_map[i] ) + break ; + if( i > 7 ) /* Not found. */ + i = 3; /* Always 100% */ + return( (i & 0x07)<<5 ); +} + +#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15)) +#define HYST_FROM_REG(val) ((val)*1000) + +#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127)) +#define OFFSET_FROM_REG(val) ((val)*25) + +#define PPR_MASK(fan) (0x03<<(fan *2)) +#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2)) +#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1) + +/* i2c-vid.h defines vid_from_reg() */ +#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm))) + +#define ALARMS_FROM_REG(val) (val) + +/* Unlike some other drivers we DO NOT set initial limits. Use + * the config file to set limits. Some users have reported + * motherboards shutting down when we set limits in a previous + * version of the driver. + */ + +/* Chip sampling rates + * + * Some sensors are not updated more frequently than once per second + * so it doesn't make sense to read them more often than that. + * We cache the results and return the saved data if the driver + * is called again before a second has elapsed. + * + * Also, there is significant configuration data for this chip + * given the automatic PWM fan control that is possible. There + * are about 47 bytes of config data to only 22 bytes of actual + * readings. So, we keep the config data up to date in the cache + * when it is written and only sample it once every 1 *minute* + */ +#define LM85_DATA_INTERVAL (HZ + HZ / 2) +#define LM85_CONFIG_INTERVAL (1 * 60 * HZ) + +/* For each registered LM85, we need to keep some data in memory. That + data is pointed to by lm85_list[NR]->data. The structure itself is + dynamically allocated, at the same time when a new lm85 client is + allocated. */ + +/* LM85 can automatically adjust fan speeds based on temperature + * This structure encapsulates an entire Zone config. There are + * three zones (one for each temperature input) on the lm85 + */ +struct lm85_zone { + s8 limit; /* Low temp limit */ + u8 hyst; /* Low limit hysteresis. (0-15) */ + u8 range; /* Temp range, encoded */ + s8 critical; /* "All fans ON" temp limit */ + u8 off_desired; /* Actual "off" temperature specified. Preserved + * to prevent "drift" as other autofan control + * values change. + */ + u8 max_desired; /* Actual "max" temperature specified. Preserved + * to prevent "drift" as other autofan control + * values change. + */ +}; + +struct lm85_autofan { + u8 config; /* Register value */ + u8 freq; /* PWM frequency, encoded */ + u8 min_pwm; /* Minimum PWM value, encoded */ + u8 min_off; /* Min PWM or OFF below "limit", flag */ +}; + +struct lm85_data { + struct i2c_client client; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + int valid; /* !=0 if following fields are valid */ + unsigned long last_reading; /* In jiffies */ + unsigned long last_config; /* In jiffies */ + + u8 in[8]; /* Register value */ + u8 in_max[8]; /* Register value */ + u8 in_min[8]; /* Register value */ + s8 temp[3]; /* Register value */ + s8 temp_min[3]; /* Register value */ + s8 temp_max[3]; /* Register value */ + s8 temp_offset[3]; /* Register value */ + u16 fan[4]; /* Register value */ + u16 fan_min[4]; /* Register value */ + u8 pwm[3]; /* Register value */ + u8 spinup_ctl; /* Register encoding, combined */ + u8 tach_mode; /* Register encoding, combined */ + u8 temp_ext[3]; /* Decoded values */ + u8 in_ext[8]; /* Decoded values */ + u8 adc_scale; /* ADC Extended bits scaling factor */ + u8 fan_ppr; /* Register value */ + u8 smooth[3]; /* Register encoding */ + u8 vid; /* Register value */ + u8 vrm; /* VRM version */ + u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ + u8 oppoint[3]; /* Register value */ + u16 tmin_ctl; /* Register value */ + unsigned long therm_total; /* Cummulative therm count */ + u8 therm_limit; /* Register value */ + u32 alarms; /* Register encoding, combined */ + struct lm85_autofan autofan[3]; + struct lm85_zone zone[3]; +}; + +static int lm85_attach_adapter(struct i2c_adapter *adapter); +static int lm85_detect(struct i2c_adapter *adapter, int address, + int kind); +static int lm85_detach_client(struct i2c_client *client); + +static int lm85_read_value(struct i2c_client *client, u8 register); +static int lm85_write_value(struct i2c_client *client, u8 register, int value); +static struct lm85_data *lm85_update_device(struct device *dev); +static void lm85_init_client(struct i2c_client *client); + + +static struct i2c_driver lm85_driver = { + .owner = THIS_MODULE, + .name = "lm85", + .id = I2C_DRIVERID_LM85, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm85_attach_adapter, + .detach_client = lm85_detach_client, +}; + + +/* 4 Fans */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) ); +} +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) ); +} +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val); + lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + return count; +} + +#define show_fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \ + NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); + +show_fan_offset(1); +show_fan_offset(2); +show_fan_offset(3); +show_fan_offset(4); + +/* vid, vrm, alarms */ + +static ssize_t show_vid_reg(struct device *dev, char *buf) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); +} + +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); + +static ssize_t show_vrm_reg(struct device *dev, char *buf) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->vrm); +} + +static ssize_t store_vrm_reg(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + data->vrm = val; + return count; +} + +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); + +static ssize_t show_alarms_reg(struct device *dev, char *buf) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms)); +} + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); + +/* pwm */ + +static ssize_t show_pwm(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) ); +} +static ssize_t set_pwm(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->pwm[nr] = PWM_TO_REG(val); + lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]); + up(&data->update_lock); + return count; +} +static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + int pwm_zone; + + pwm_zone = ZONE_FROM_REG(data->autofan[nr].config); + return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) ); +} + +#define show_pwm_reg(offset) \ +static ssize_t show_pwm_##offset (struct device *dev, char *buf) \ +{ \ + return show_pwm(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm_##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_pwm_enable##offset (struct device *dev, char *buf) \ +{ \ + return show_pwm_enable(dev, buf, offset - 1); \ +} \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_pwm_##offset, set_pwm_##offset); \ +static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, \ + show_pwm_enable##offset, NULL); + +show_pwm_reg(1); +show_pwm_reg(2); +show_pwm_reg(3); + +/* Voltages */ + +static ssize_t show_in(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr, + data->in[nr], + data->in_ext[nr], + data->adc_scale) ); +} +static ssize_t show_in_min(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) ); +} +static ssize_t set_in_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = INS_TO_REG(nr, val); + lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t show_in_max(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) ); +} +static ssize_t set_in_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = INS_TO_REG(nr, val); + lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]); + up(&data->update_lock); + return count; +} +#define show_in_reg(offset) \ +static ssize_t show_in_##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static ssize_t show_in_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t show_in_##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t set_in_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t set_in_##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, \ + NULL); \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in_##offset##_min, set_in_##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in_##offset##_max, set_in_##offset##_max); + +show_in_reg(0); +show_in_reg(1); +show_in_reg(2); +show_in_reg(3); +show_in_reg(4); + +/* Temps */ + +static ssize_t show_temp(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr], + data->temp_ext[nr], + data->adc_scale) ); +} +static ssize_t show_temp_min(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) ); +} +static ssize_t set_temp_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_min[nr] = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t show_temp_max(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) ); +} +static ssize_t set_temp_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max[nr] = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); + up(&data->update_lock); + return count; +} +#define show_temp_reg(offset) \ +static ssize_t show_temp_##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_temp_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_temp_##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_temp_max(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_max(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \ + NULL); \ +static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_min, set_temp_##offset##_min); \ +static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_max, set_temp_##offset##_max); + +show_temp_reg(1); +show_temp_reg(2); +show_temp_reg(3); + + +/* Automatic PWM control */ + +static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config)); +} +static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) + | ZONE_TO_REG(val) ; + lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), + data->autofan[nr].config); + up(&data->update_lock); + return count; +} +static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); +} +static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->autofan[nr].min_pwm = PWM_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr), + data->autofan[nr].min_pwm); + up(&data->update_lock); + return count; +} +static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", data->autofan[nr].min_off); +} +static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->autofan[nr].min_off = val; + lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0] + | data->syncpwm3 + | (data->autofan[0].min_off ? 0x20 : 0) + | (data->autofan[1].min_off ? 0x40 : 0) + | (data->autofan[2].min_off ? 0x80 : 0) + ); + up(&data->update_lock); + return count; +} +static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); +} +static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->autofan[nr].freq = FREQ_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + (data->zone[nr].range << 4) + | data->autofan[nr].freq + ); + up(&data->update_lock); + return count; +} +#define pwm_auto(offset) \ +static ssize_t show_pwm##offset##_auto_channels (struct device *dev, \ + char *buf) \ +{ \ + return show_pwm_auto_channels(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_auto_channels (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_auto_channels(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, \ + char *buf) \ +{ \ + return show_pwm_auto_pwm_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_auto_pwm_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, \ + char *buf) \ +{ \ + return show_pwm_auto_pwm_minctl(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, \ + char *buf) \ +{ \ + return show_pwm_auto_pwm_freq(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR, \ + show_pwm##offset##_auto_channels, \ + set_pwm##offset##_auto_channels); \ +static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR, \ + show_pwm##offset##_auto_pwm_min, \ + set_pwm##offset##_auto_pwm_min); \ +static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR, \ + show_pwm##offset##_auto_pwm_minctl, \ + set_pwm##offset##_auto_pwm_minctl); \ +static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR, \ + show_pwm##offset##_auto_pwm_freq, \ + set_pwm##offset##_auto_pwm_freq); +pwm_auto(1); +pwm_auto(2); +pwm_auto(3); + +/* Temperature settings for automatic PWM control */ + +static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) - + HYST_FROM_REG(data->zone[nr].hyst)); +} +static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + int min; + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + min = TEMP_FROM_REG(data->zone[nr].limit); + data->zone[nr].off_desired = TEMP_TO_REG(val); + data->zone[nr].hyst = HYST_TO_REG(min - val); + if ( nr == 0 || nr == 1 ) { + lm85_write_value(client, LM85_REG_AFAN_HYST1, + (data->zone[0].hyst << 4) + | data->zone[1].hyst + ); + } else { + lm85_write_value(client, LM85_REG_AFAN_HYST2, + (data->zone[2].hyst << 4) + ); + } + up(&data->update_lock); + return count; +} +static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) ); +} +static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->zone[nr].limit = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr), + data->zone[nr].limit); + +/* Update temp_auto_max and temp_auto_range */ + data->zone[nr].range = RANGE_TO_REG( + TEMP_FROM_REG(data->zone[nr].max_desired) - + TEMP_FROM_REG(data->zone[nr].limit)); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + ((data->zone[nr].range & 0x0f) << 4) + | (data->autofan[nr].freq & 0x07)); + +/* Update temp_auto_hyst and temp_auto_off */ + data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( + data->zone[nr].limit) - TEMP_FROM_REG( + data->zone[nr].off_desired)); + if ( nr == 0 || nr == 1 ) { + lm85_write_value(client, LM85_REG_AFAN_HYST1, + (data->zone[0].hyst << 4) + | data->zone[1].hyst + ); + } else { + lm85_write_value(client, LM85_REG_AFAN_HYST2, + (data->zone[2].hyst << 4) + ); + } + up(&data->update_lock); + return count; +} +static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) + + RANGE_FROM_REG(data->zone[nr].range)); +} +static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + int min; + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + min = TEMP_FROM_REG(data->zone[nr].limit); + data->zone[nr].max_desired = TEMP_TO_REG(val); + data->zone[nr].range = RANGE_TO_REG( + val - min); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + ((data->zone[nr].range & 0x0f) << 4) + | (data->autofan[nr].freq & 0x07)); + up(&data->update_lock); + return count; +} +static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical)); +} +static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->zone[nr].critical = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr), + data->zone[nr].critical); + up(&data->update_lock); + return count; +} +#define temp_auto(offset) \ +static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, \ + char *buf) \ +{ \ + return show_temp_auto_temp_off(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_auto_temp_off(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, \ + char *buf) \ +{ \ + return show_temp_auto_temp_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_auto_temp_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, \ + char *buf) \ +{ \ + return show_temp_auto_temp_max(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_auto_temp_max(dev, buf, count, offset - 1); \ +} \ +static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, \ + char *buf) \ +{ \ + return show_temp_auto_temp_crit(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_auto_temp_crit(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR, \ + show_temp##offset##_auto_temp_off, \ + set_temp##offset##_auto_temp_off); \ +static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR, \ + show_temp##offset##_auto_temp_min, \ + set_temp##offset##_auto_temp_min); \ +static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR, \ + show_temp##offset##_auto_temp_max, \ + set_temp##offset##_auto_temp_max); \ +static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR, \ + show_temp##offset##_auto_temp_crit, \ + set_temp##offset##_auto_temp_crit); +temp_auto(1); +temp_auto(2); +temp_auto(3); + +int lm85_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm85_detect); +} + +int lm85_detect(struct i2c_adapter *adapter, int address, + int kind) +{ + int company, verstep ; + struct i2c_client *new_client = NULL; + struct lm85_data *data; + int err = 0; + const char *type_name = ""; + + if (i2c_is_isa_adapter(adapter)) { + /* This chip has no ISA interface */ + goto ERROR0 ; + }; + + if (!i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + /* We need to be able to do byte I/O */ + goto ERROR0 ; + }; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access lm85_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR0; + } + memset(data, 0, sizeof(struct lm85_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm85_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + + company = lm85_read_value(new_client, LM85_REG_COMPANY); + verstep = lm85_read_value(new_client, LM85_REG_VERSTEP); + + dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" + " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", + i2c_adapter_id(new_client->adapter), new_client->addr, + company, verstep); + + /* If auto-detecting, Determine the chip type. */ + if (kind <= 0) { + dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n", + i2c_adapter_id(adapter), address ); + if( company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85C ) { + kind = lm85c ; + } else if( company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85B ) { + kind = lm85b ; + } else if( company == LM85_COMPANY_NATIONAL + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" + " Defaulting to LM85.\n", verstep); + kind = any_chip ; + } else if( company == LM85_COMPANY_ANALOG_DEV + && verstep == LM85_VERSTEP_ADM1027 ) { + kind = adm1027 ; + } else if( company == LM85_COMPANY_ANALOG_DEV + && (verstep == LM85_VERSTEP_ADT7463 + || verstep == LM85_VERSTEP_ADT7463C) ) { + kind = adt7463 ; + } else if( company == LM85_COMPANY_ANALOG_DEV + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" + " Defaulting to Generic LM85.\n", verstep ); + kind = any_chip ; + } else if( company == LM85_COMPANY_SMSC + && (verstep == LM85_VERSTEP_EMC6D100_A0 + || verstep == LM85_VERSTEP_EMC6D100_A1) ) { + /* Unfortunately, we can't tell a '100 from a '101 + * from the registers. Since a '101 is a '100 + * in a package with fewer pins and therefore no + * 3.3V, 1.5V or 1.8V inputs, perhaps if those + * inputs read 0, then it's a '101. + */ + kind = emc6d100 ; + } else if( company == LM85_COMPANY_SMSC + && verstep == LM85_VERSTEP_EMC6D102) { + kind = emc6d102 ; + } else if( company == LM85_COMPANY_SMSC + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { + dev_err(&adapter->dev, "lm85: Detected SMSC chip\n"); + dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x" + " Defaulting to Generic LM85.\n", verstep ); + kind = any_chip ; + } else if( kind == any_chip + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { + dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n"); + /* Leave kind as "any_chip" */ + } else { + dev_dbg(&adapter->dev, "Autodetection failed\n"); + /* Not an LM85 ... */ + if( kind == any_chip ) { /* User used force=x,y */ + dev_err(&adapter->dev, "Generic LM85 Version 6 not" + " found at %d,0x%02x. Try force_lm85c.\n", + i2c_adapter_id(adapter), address ); + } + err = 0 ; + goto ERROR1; + } + } + + /* Fill in the chip specific driver values */ + if ( kind == any_chip ) { + type_name = "lm85"; + } else if ( kind == lm85b ) { + type_name = "lm85b"; + } else if ( kind == lm85c ) { + type_name = "lm85c"; + } else if ( kind == adm1027 ) { + type_name = "adm1027"; + } else if ( kind == adt7463 ) { + type_name = "adt7463"; + } else if ( kind == emc6d100){ + type_name = "emc6d100"; + } else if ( kind == emc6d102 ) { + type_name = "emc6d102"; + } + strlcpy(new_client->name, type_name, I2C_NAME_SIZE); + + /* Fill in the remaining client fields */ + data->type = kind; + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR1; + + /* Set the VRM version */ + data->vrm = i2c_which_vrm(); + + /* Initialize the LM85 chip */ + lm85_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan3_input); + device_create_file(&new_client->dev, &dev_attr_fan4_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan3_min); + device_create_file(&new_client->dev, &dev_attr_fan4_min); + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &dev_attr_pwm3); + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + device_create_file(&new_client->dev, &dev_attr_pwm2_enable); + device_create_file(&new_client->dev, &dev_attr_pwm3_enable); + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp3_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_vrm); + device_create_file(&new_client->dev, &dev_attr_cpu0_vid); + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels); + device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels); + device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels); + device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min); + device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min); + device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min); + device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl); + device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl); + device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl); + device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq); + device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq); + device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq); + device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off); + device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off); + device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off); + device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min); + device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min); + device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min); + device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max); + device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max); + device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max); + device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit); + device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit); + + return 0; + + /* Error out and cleanup code */ + ERROR1: + kfree(data); + ERROR0: + return err; +} + +int lm85_detach_client(struct i2c_client *client) +{ + i2c_detach_client(client); + kfree(i2c_get_clientdata(client)); + return 0; +} + + +int lm85_read_value(struct i2c_client *client, u8 reg) +{ + int res; + + /* What size location is it? */ + switch( reg ) { + case LM85_REG_FAN(0) : /* Read WORD data */ + case LM85_REG_FAN(1) : + case LM85_REG_FAN(2) : + case LM85_REG_FAN(3) : + case LM85_REG_FAN_MIN(0) : + case LM85_REG_FAN_MIN(1) : + case LM85_REG_FAN_MIN(2) : + case LM85_REG_FAN_MIN(3) : + case LM85_REG_ALARM1 : /* Read both bytes at once */ + res = i2c_smbus_read_byte_data(client, reg) & 0xff ; + res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ; + break ; + case ADT7463_REG_TMIN_CTL1 : /* Read WORD MSB, LSB */ + res = i2c_smbus_read_byte_data(client, reg) << 8 ; + res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ; + break ; + default: /* Read BYTE data */ + res = i2c_smbus_read_byte_data(client, reg); + break ; + } + + return res ; +} + +int lm85_write_value(struct i2c_client *client, u8 reg, int value) +{ + int res ; + + switch( reg ) { + case LM85_REG_FAN(0) : /* Write WORD data */ + case LM85_REG_FAN(1) : + case LM85_REG_FAN(2) : + case LM85_REG_FAN(3) : + case LM85_REG_FAN_MIN(0) : + case LM85_REG_FAN_MIN(1) : + case LM85_REG_FAN_MIN(2) : + case LM85_REG_FAN_MIN(3) : + /* NOTE: ALARM is read only, so not included here */ + res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ; + res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ; + break ; + case ADT7463_REG_TMIN_CTL1 : /* Write WORD MSB, LSB */ + res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff); + res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ; + break ; + default: /* Write BYTE data */ + res = i2c_smbus_write_byte_data(client, reg, value); + break ; + } + + return res ; +} + +void lm85_init_client(struct i2c_client *client) +{ + int value; + struct lm85_data *data = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "Initializing device\n"); + + /* Warn if part was not "READY" */ + value = lm85_read_value(client, LM85_REG_CONFIG); + dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value); + if( value & 0x02 ) { + dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n", + i2c_adapter_id(client->adapter), client->addr ); + }; + if( ! (value & 0x04) ) { + dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n", + i2c_adapter_id(client->adapter), client->addr ); + }; + if( value & 0x10 + && ( data->type == adm1027 + || data->type == adt7463 ) ) { + dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. " + "Please report this to the lm85 maintainer.\n", + i2c_adapter_id(client->adapter), client->addr ); + }; + + /* WE INTENTIONALLY make no changes to the limits, + * offsets, pwms, fans and zones. If they were + * configured, we don't want to mess with them. + * If they weren't, the default is 100% PWM, no + * control and will suffice until 'sensors -s' + * can be run by the user. + */ + + /* Start monitoring */ + value = lm85_read_value(client, LM85_REG_CONFIG); + /* Try to clear LOCK, Set START, save everything else */ + value = (value & ~ 0x02) | 0x01 ; + dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); + lm85_write_value(client, LM85_REG_CONFIG, value); +} + +static struct lm85_data *lm85_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if ( !data->valid || + time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) { + /* Things that change quickly */ + dev_dbg(&client->dev, "Reading sensor values\n"); + + /* Have to read extended bits first to "freeze" the + * more significant bits that are read later. + */ + if ( (data->type == adm1027) || (data->type == adt7463) ) { + int ext1 = lm85_read_value(client, + ADM1027_REG_EXTEND_ADC1); + int ext2 = lm85_read_value(client, + ADM1027_REG_EXTEND_ADC2); + int val = (ext1 << 8) + ext2; + + for(i = 0; i <= 4; i++) + data->in_ext[i] = (val>>(i * 2))&0x03; + + for(i = 0; i <= 2; i++) + data->temp_ext[i] = (val>>((i + 5) * 2))&0x03; + } + + /* adc_scale is 2^(number of LSBs). There are 4 extra bits in + the emc6d102 and 2 in the adt7463 and adm1027. In all + other chips ext is always 0 and the value of scale is + irrelevant. So it is left in 4*/ + data->adc_scale = (data->type == emc6d102 ) ? 16 : 4; + + for (i = 0; i <= 4; ++i) { + data->in[i] = + lm85_read_value(client, LM85_REG_IN(i)); + } + + for (i = 0; i <= 3; ++i) { + data->fan[i] = + lm85_read_value(client, LM85_REG_FAN(i)); + } + + for (i = 0; i <= 2; ++i) { + data->temp[i] = + lm85_read_value(client, LM85_REG_TEMP(i)); + } + + for (i = 0; i <= 2; ++i) { + data->pwm[i] = + lm85_read_value(client, LM85_REG_PWM(i)); + } + + data->alarms = lm85_read_value(client, LM85_REG_ALARM1); + + if ( data->type == adt7463 ) { + if( data->therm_total < ULONG_MAX - 256 ) { + data->therm_total += + lm85_read_value(client, ADT7463_REG_THERM ); + } + } else if ( data->type == emc6d100 ) { + /* Three more voltage sensors */ + for (i = 5; i <= 7; ++i) { + data->in[i] = + lm85_read_value(client, EMC6D100_REG_IN(i)); + } + /* More alarm bits */ + data->alarms |= + lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; + } else if (data->type == emc6d102 ) { + /* Have to read LSB bits after the MSB ones because + the reading of the MSB bits has frozen the + LSBs (backward from the ADM1027). + */ + int ext1 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC1); + int ext2 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC2); + int ext3 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC3); + int ext4 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC4); + data->in_ext[0] = ext3 & 0x0f; + data->in_ext[1] = ext4 & 0x0f; + data->in_ext[2] = (ext4 >> 4) & 0x0f; + data->in_ext[3] = (ext3 >> 4) & 0x0f; + data->in_ext[4] = (ext2 >> 4) & 0x0f; + + data->temp_ext[0] = ext1 & 0x0f; + data->temp_ext[1] = ext2 & 0x0f; + data->temp_ext[2] = (ext1 >> 4) & 0x0f; + } + + data->last_reading = jiffies ; + }; /* last_reading */ + + if ( !data->valid || + time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) { + /* Things that don't change often */ + dev_dbg(&client->dev, "Reading config values\n"); + + for (i = 0; i <= 4; ++i) { + data->in_min[i] = + lm85_read_value(client, LM85_REG_IN_MIN(i)); + data->in_max[i] = + lm85_read_value(client, LM85_REG_IN_MAX(i)); + } + + if ( data->type == emc6d100 ) { + for (i = 5; i <= 7; ++i) { + data->in_min[i] = + lm85_read_value(client, EMC6D100_REG_IN_MIN(i)); + data->in_max[i] = + lm85_read_value(client, EMC6D100_REG_IN_MAX(i)); + } + } + + for (i = 0; i <= 3; ++i) { + data->fan_min[i] = + lm85_read_value(client, LM85_REG_FAN_MIN(i)); + } + + for (i = 0; i <= 2; ++i) { + data->temp_min[i] = + lm85_read_value(client, LM85_REG_TEMP_MIN(i)); + data->temp_max[i] = + lm85_read_value(client, LM85_REG_TEMP_MAX(i)); + } + + data->vid = lm85_read_value(client, LM85_REG_VID); + + for (i = 0; i <= 2; ++i) { + int val ; + data->autofan[i].config = + lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); + val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); + data->autofan[i].freq = val & 0x07 ; + data->zone[i].range = (val >> 4) & 0x0f ; + data->autofan[i].min_pwm = + lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); + data->zone[i].limit = + lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); + data->zone[i].critical = + lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); + } + + i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); + data->smooth[0] = i & 0x0f ; + data->syncpwm3 = i & 0x10 ; /* Save PWM3 config */ + data->autofan[0].min_off = (i & 0x20) != 0 ; + data->autofan[1].min_off = (i & 0x40) != 0 ; + data->autofan[2].min_off = (i & 0x80) != 0 ; + i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); + data->smooth[1] = (i>>4) & 0x0f ; + data->smooth[2] = i & 0x0f ; + + i = lm85_read_value(client, LM85_REG_AFAN_HYST1); + data->zone[0].hyst = (i>>4) & 0x0f ; + data->zone[1].hyst = i & 0x0f ; + + i = lm85_read_value(client, LM85_REG_AFAN_HYST2); + data->zone[2].hyst = (i>>4) & 0x0f ; + + if ( (data->type == lm85b) || (data->type == lm85c) ) { + data->tach_mode = lm85_read_value(client, + LM85_REG_TACH_MODE ); + data->spinup_ctl = lm85_read_value(client, + LM85_REG_SPINUP_CTL ); + } else if ( (data->type == adt7463) || (data->type == adm1027) ) { + if ( data->type == adt7463 ) { + for (i = 0; i <= 2; ++i) { + data->oppoint[i] = lm85_read_value(client, + ADT7463_REG_OPPOINT(i) ); + } + data->tmin_ctl = lm85_read_value(client, + ADT7463_REG_TMIN_CTL1 ); + data->therm_limit = lm85_read_value(client, + ADT7463_REG_THERM_LIMIT ); + } + for (i = 0; i <= 2; ++i) { + data->temp_offset[i] = lm85_read_value(client, + ADM1027_REG_TEMP_OFFSET(i) ); + } + data->tach_mode = lm85_read_value(client, + ADM1027_REG_CONFIG3 ); + data->fan_ppr = lm85_read_value(client, + ADM1027_REG_FAN_PPR ); + } + + data->last_config = jiffies; + }; /* last_config */ + + data->valid = 1; + + up(&data->update_lock); + + return data; +} + + +static int __init sm_lm85_init(void) +{ + return i2c_add_driver(&lm85_driver); +} + +static void __exit sm_lm85_exit(void) +{ + i2c_del_driver(&lm85_driver); +} + +/* Thanks to Richard Barrington for adding the LM85 to sensors-detect. + * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with + * post 2.7.0 CVS changes. + */ +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com"); +MODULE_DESCRIPTION("LM85-B, LM85-C driver"); + +module_init(sm_lm85_init); +module_exit(sm_lm85_exit); diff --git a/drivers/i2c/chips/lm87.c b/drivers/i2c/chips/lm87.c new file mode 100644 index 000000000000..98cabd665063 --- /dev/null +++ b/drivers/i2c/chips/lm87.c @@ -0,0 +1,829 @@ +/* + * lm87.c + * + * Copyright (C) 2000 Frodo Looijaard <frodol@dds.nl> + * Philip Edelbrock <phil@netroedge.com> + * Stephen Rousset <stephen.rousset@rocketlogix.com> + * Dan Eaton <dan.eaton@rocketlogix.com> + * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * + * Original port to Linux 2.6 by Jeff Oliver. + * + * The LM87 is a sensor chip made by National Semiconductor. It monitors up + * to 8 voltages (including its own power source), up to three temperatures + * (its own plus up to two external ones) and up to two fans. The default + * configuration is 6 voltages, two temperatures and two fans (see below). + * Voltages are scaled internally with ratios such that the nominal value of + * each voltage correspond to a register value of 192 (which means a + * resolution of about 0.5% of the nominal value). Temperature values are + * reported with a 1 deg resolution and a 3-4 deg accuracy. Complete + * datasheet can be obtained from National's website at: + * http://www.national.com/pf/LM/LM87.html + * + * Some functions share pins, so not all functions are available at the same + * time. Which are depends on the hardware setup. This driver assumes that + * the BIOS configured the chip correctly. In that respect, it differs from + * the original driver (from lm_sensors for Linux 2.4), which would force the + * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual + * chipset wiring. + * For reference, here is the list of exclusive functions: + * - in0+in5 (default) or temp3 + * - fan1 (default) or in6 + * - fan2 (default) or in7 + * - VID lines (default) or IRQ lines (not handled by this driver) + * + * The LM87 additionally features an analog output, supposedly usable to + * control the speed of a fan. All new chips use pulse width modulation + * instead. The LM87 is the only hardware monitoring chipset I know of + * which uses amplitude modulation. Be careful when using this feature. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> + +/* + * Addresses to scan + * LM87 has three possible addresses: 0x2c, 0x2d and 0x2e. + */ + +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(lm87); + +/* + * The LM87 registers + */ + +/* nr in 0..5 */ +#define LM87_REG_IN(nr) (0x20 + (nr)) +#define LM87_REG_IN_MAX(nr) (0x2B + (nr) * 2) +#define LM87_REG_IN_MIN(nr) (0x2C + (nr) * 2) +/* nr in 0..1 */ +#define LM87_REG_AIN(nr) (0x28 + (nr)) +#define LM87_REG_AIN_MIN(nr) (0x1A + (nr)) +#define LM87_REG_AIN_MAX(nr) (0x3B + (nr)) + +static u8 LM87_REG_TEMP[3] = { 0x27, 0x26, 0x20 }; +static u8 LM87_REG_TEMP_HIGH[3] = { 0x39, 0x37, 0x2B }; +static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C }; + +#define LM87_REG_TEMP_HW_INT_LOCK 0x13 +#define LM87_REG_TEMP_HW_EXT_LOCK 0x14 +#define LM87_REG_TEMP_HW_INT 0x17 +#define LM87_REG_TEMP_HW_EXT 0x18 + +/* nr in 0..1 */ +#define LM87_REG_FAN(nr) (0x28 + (nr)) +#define LM87_REG_FAN_MIN(nr) (0x3B + (nr)) +#define LM87_REG_AOUT 0x19 + +#define LM87_REG_CONFIG 0x40 +#define LM87_REG_CHANNEL_MODE 0x16 +#define LM87_REG_VID_FAN_DIV 0x47 +#define LM87_REG_VID4 0x49 + +#define LM87_REG_ALARMS1 0x41 +#define LM87_REG_ALARMS2 0x42 + +#define LM87_REG_COMPANY_ID 0x3E +#define LM87_REG_REVISION 0x3F + +/* + * Conversions and various macros + * The LM87 uses signed 8-bit values for temperatures. + */ + +#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192) +#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \ + (val) * 192 >= (scale) * 255 ? 255 : \ + ((val) * 192 + (scale)/2) / (scale)) + +#define TEMP_FROM_REG(reg) ((reg) * 1000) +#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \ + (val) >= 126500 ? 127 : \ + (((val) < 0 ? (val)-500 : (val)+500) / 1000)) + +#define FAN_FROM_REG(reg,div) ((reg) == 255 || (reg) == 0 ? 0 : \ + 1350000 + (reg)*(div) / 2) / ((reg)*(div)) +#define FAN_TO_REG(val,div) ((val)*(div) * 255 <= 1350000 ? 255 : \ + (1350000 + (val)*(div) / 2) / ((val)*(div))) + +#define FAN_DIV_FROM_REG(reg) (1 << (reg)) + +/* analog out is 9.80mV/LSB */ +#define AOUT_FROM_REG(reg) (((reg) * 98 + 5) / 10) +#define AOUT_TO_REG(val) ((val) <= 0 ? 0 : \ + (val) >= 2500 ? 255 : \ + ((val) * 10 + 49) / 98) + +/* nr in 0..1 */ +#define CHAN_NO_FAN(nr) (1 << (nr)) +#define CHAN_TEMP3 (1 << 2) +#define CHAN_VCC_5V (1 << 3) +#define CHAN_NO_VID (1 << 8) + +/* + * Functions declaration + */ + +static int lm87_attach_adapter(struct i2c_adapter *adapter); +static int lm87_detect(struct i2c_adapter *adapter, int address, int kind); +static void lm87_init_client(struct i2c_client *client); +static int lm87_detach_client(struct i2c_client *client); +static struct lm87_data *lm87_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver lm87_driver = { + .owner = THIS_MODULE, + .name = "lm87", + .id = I2C_DRIVERID_LM87, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm87_attach_adapter, + .detach_client = lm87_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct lm87_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 channel; /* register value */ + + u8 in[8]; /* register value */ + u8 in_max[8]; /* register value */ + u8 in_min[8]; /* register value */ + u16 in_scale[8]; + + s8 temp[3]; /* register value */ + s8 temp_high[3]; /* register value */ + s8 temp_low[3]; /* register value */ + s8 temp_crit_int; /* min of two register values */ + s8 temp_crit_ext; /* min of two register values */ + + u8 fan[2]; /* register value */ + u8 fan_min[2]; /* register value */ + u8 fan_div[2]; /* register value, shifted right */ + u8 aout; /* register value */ + + u16 alarms; /* register values, combined */ + u8 vid; /* register values, combined */ + u8 vrm; +}; + +/* + * Sysfs stuff + */ + +static inline int lm87_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int lm87_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +#define show_in(offset) \ +static ssize_t show_in##offset##_input(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ + data->in_scale[offset])); \ +} \ +static ssize_t show_in##offset##_min(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ + data->in_scale[offset])); \ +} \ +static ssize_t show_in##offset##_max(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ + data->in_scale[offset])); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in##offset##_input, NULL); +show_in(0); +show_in(1); +show_in(2); +show_in(3); +show_in(4); +show_in(5); +show_in(6); +show_in(7); + +static void set_in_min(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]); + lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) : + LM87_REG_AIN_MIN(nr-6), data->in_min[nr]); + up(&data->update_lock); +} + +static void set_in_max(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]); + lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) : + LM87_REG_AIN_MAX(nr-6), data->in_max[nr]); + up(&data->update_lock); +} + +#define set_in(offset) \ +static ssize_t set_in##offset##_min(struct device *dev, \ + const char *buf, size_t count) \ +{ \ + set_in_min(dev, buf, offset); \ + return count; \ +} \ +static ssize_t set_in##offset##_max(struct device *dev, \ + const char *buf, size_t count) \ +{ \ + set_in_max(dev, buf, offset); \ + return count; \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); +set_in(0); +set_in(1); +set_in(2); +set_in(3); +set_in(4); +set_in(5); +set_in(6); +set_in(7); + +#define show_temp(offset) \ +static ssize_t show_temp##offset##_input(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ +} \ +static ssize_t show_temp##offset##_low(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[offset-1])); \ +} \ +static ssize_t show_temp##offset##_high(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[offset-1])); \ +}\ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp##offset##_input, NULL); +show_temp(1); +show_temp(2); +show_temp(3); + +static void set_temp_low(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_low[nr] = TEMP_TO_REG(val); + lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]); + up(&data->update_lock); +} + +static void set_temp_high(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_high[nr] = TEMP_TO_REG(val); + lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]); + up(&data->update_lock); +} + +#define set_temp(offset) \ +static ssize_t set_temp##offset##_low(struct device *dev, \ + const char *buf, size_t count) \ +{ \ + set_temp_low(dev, buf, offset-1); \ + return count; \ +} \ +static ssize_t set_temp##offset##_high(struct device *dev, \ + const char *buf, size_t count) \ +{ \ + set_temp_high(dev, buf, offset-1); \ + return count; \ +} \ +static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp##offset##_high, set_temp##offset##_high); \ +static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp##offset##_low, set_temp##offset##_low); +set_temp(1); +set_temp(2); +set_temp(3); + +static ssize_t show_temp_crit_int(struct device *dev, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_int)); +} + +static ssize_t show_temp_crit_ext(struct device *dev, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_ext)); +} + +static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit_int, NULL); +static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit_ext, NULL); +static DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit_ext, NULL); + +#define show_fan(offset) \ +static ssize_t show_fan##offset##_input(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[offset-1], \ + FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \ +} \ +static ssize_t show_fan##offset##_min(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[offset-1], \ + FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \ +} \ +static ssize_t show_fan##offset##_div(struct device *dev, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[offset-1])); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan##offset##_input, NULL); +show_fan(1); +show_fan(2); + +static void set_fan_min(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, + FAN_DIV_FROM_REG(data->fan_div[nr])); + lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan clock divider. This follows the principle + of least suprise; the user doesn't expect the fan minimum to change just + because the divider changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + unsigned long min; + u8 reg; + + down(&data->update_lock); + min = FAN_FROM_REG(data->fan_min[nr], + FAN_DIV_FROM_REG(data->fan_div[nr])); + + switch (val) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + up(&data->update_lock); + return -EINVAL; + } + + reg = lm87_read_value(client, LM87_REG_VID_FAN_DIV); + switch (nr) { + case 0: + reg = (reg & 0xCF) | (data->fan_div[0] << 4); + break; + case 1: + reg = (reg & 0x3F) | (data->fan_div[1] << 6); + break; + } + lm87_write_value(client, LM87_REG_VID_FAN_DIV, reg); + + data->fan_min[nr] = FAN_TO_REG(min, val); + lm87_write_value(client, LM87_REG_FAN_MIN(nr), + data->fan_min[nr]); + up(&data->update_lock); + + return count; +} + +#define set_fan(offset) \ +static ssize_t set_fan##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + set_fan_min(dev, buf, offset-1); \ + return count; \ +} \ +static ssize_t set_fan##offset##_div(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset-1); \ +} \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan##offset##_min, set_fan##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan##offset##_div, set_fan##offset##_div); +set_fan(1); +set_fan(2); + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +static ssize_t show_vid(struct device *dev, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); + +static ssize_t show_vrm(struct device *dev, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", data->vrm); +} +static ssize_t set_vrm(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + data->vrm = simple_strtoul(buf, NULL, 10); + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); + +static ssize_t show_aout(struct device *dev, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); +} +static ssize_t set_aout(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->aout = AOUT_TO_REG(val); + lm87_write_value(client, LM87_REG_AOUT, data->aout); + up(&data->update_lock); + return count; +} +static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); + +/* + * Real code + */ + +static int lm87_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm87_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm87_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm87_data)); + + /* The common I2C client data is placed right before the + LM87-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm87_driver; + new_client->flags = 0; + + /* Default to an LM87 if forced */ + if (kind == 0) + kind = lm87; + + /* Now, we do the remaining detection. */ + if (kind < 0) { + u8 rev = lm87_read_value(new_client, LM87_REG_REVISION); + + if (rev < 0x01 || rev > 0x08 + || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80) + || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) { + dev_dbg(&adapter->dev, + "LM87 detection failed at 0x%02x.\n", + address); + goto exit_free; + } + } + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, "lm87", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the LM87 chip */ + lm87_init_client(new_client); + + data->in_scale[0] = 2500; + data->in_scale[1] = 2700; + data->in_scale[2] = (data->channel & CHAN_VCC_5V) ? 5000 : 3300; + data->in_scale[3] = 5000; + data->in_scale[4] = 12000; + data->in_scale[5] = 2700; + data->in_scale[6] = 1875; + data->in_scale[7] = 1875; + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in4_max); + + if (data->channel & CHAN_NO_FAN(0)) { + device_create_file(&new_client->dev, &dev_attr_in6_input); + device_create_file(&new_client->dev, &dev_attr_in6_min); + device_create_file(&new_client->dev, &dev_attr_in6_max); + } else { + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + } + if (data->channel & CHAN_NO_FAN(1)) { + device_create_file(&new_client->dev, &dev_attr_in7_input); + device_create_file(&new_client->dev, &dev_attr_in7_min); + device_create_file(&new_client->dev, &dev_attr_in7_max); + } else { + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + } + + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + + if (data->channel & CHAN_TEMP3) { + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp3_min); + device_create_file(&new_client->dev, &dev_attr_temp3_crit); + } else { + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in5_max); + } + + if (!(data->channel & CHAN_NO_VID)) { + device_create_file(&new_client->dev, &dev_attr_cpu0_vid); + device_create_file(&new_client->dev, &dev_attr_vrm); + } + + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_aout_output); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static void lm87_init_client(struct i2c_client *client) +{ + struct lm87_data *data = i2c_get_clientdata(client); + u8 config; + + data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); + data->vrm = i2c_which_vrm(); + + config = lm87_read_value(client, LM87_REG_CONFIG); + if (!(config & 0x01)) { + int i; + + /* Limits are left uninitialized after power-up */ + for (i = 1; i < 6; i++) { + lm87_write_value(client, LM87_REG_IN_MIN(i), 0x00); + lm87_write_value(client, LM87_REG_IN_MAX(i), 0xFF); + } + for (i = 0; i < 2; i++) { + lm87_write_value(client, LM87_REG_TEMP_HIGH[i], 0x7F); + lm87_write_value(client, LM87_REG_TEMP_LOW[i], 0x00); + lm87_write_value(client, LM87_REG_AIN_MIN(i), 0x00); + lm87_write_value(client, LM87_REG_AIN_MAX(i), 0xFF); + } + if (data->channel & CHAN_TEMP3) { + lm87_write_value(client, LM87_REG_TEMP_HIGH[2], 0x7F); + lm87_write_value(client, LM87_REG_TEMP_LOW[2], 0x00); + } else { + lm87_write_value(client, LM87_REG_IN_MIN(0), 0x00); + lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF); + } + } + if ((config & 0x81) != 0x01) { + /* Start monitoring */ + lm87_write_value(client, LM87_REG_CONFIG, + (config & 0xF7) | 0x01); + } +} + +static int lm87_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct lm87_data *lm87_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int i, j; + + dev_dbg(&client->dev, "Updating data.\n"); + + i = (data->channel & CHAN_TEMP3) ? 1 : 0; + j = (data->channel & CHAN_TEMP3) ? 5 : 6; + for (; i < j; i++) { + data->in[i] = lm87_read_value(client, + LM87_REG_IN(i)); + data->in_min[i] = lm87_read_value(client, + LM87_REG_IN_MIN(i)); + data->in_max[i] = lm87_read_value(client, + LM87_REG_IN_MAX(i)); + } + + for (i = 0; i < 2; i++) { + if (data->channel & CHAN_NO_FAN(i)) { + data->in[6+i] = lm87_read_value(client, + LM87_REG_AIN(i)); + data->in_max[6+i] = lm87_read_value(client, + LM87_REG_AIN_MAX(i)); + data->in_min[6+i] = lm87_read_value(client, + LM87_REG_AIN_MIN(i)); + + } else { + data->fan[i] = lm87_read_value(client, + LM87_REG_FAN(i)); + data->fan_min[i] = lm87_read_value(client, + LM87_REG_FAN_MIN(i)); + } + } + + j = (data->channel & CHAN_TEMP3) ? 3 : 2; + for (i = 0 ; i < j; i++) { + data->temp[i] = lm87_read_value(client, + LM87_REG_TEMP[i]); + data->temp_high[i] = lm87_read_value(client, + LM87_REG_TEMP_HIGH[i]); + data->temp_low[i] = lm87_read_value(client, + LM87_REG_TEMP_LOW[i]); + } + + i = lm87_read_value(client, LM87_REG_TEMP_HW_INT_LOCK); + j = lm87_read_value(client, LM87_REG_TEMP_HW_INT); + data->temp_crit_int = min(i, j); + + i = lm87_read_value(client, LM87_REG_TEMP_HW_EXT_LOCK); + j = lm87_read_value(client, LM87_REG_TEMP_HW_EXT); + data->temp_crit_ext = min(i, j); + + i = lm87_read_value(client, LM87_REG_VID_FAN_DIV); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = (i >> 6) & 0x03; + data->vid = (i & 0x0F) + | (lm87_read_value(client, LM87_REG_VID4) & 0x01) + << 4; + + data->alarms = lm87_read_value(client, LM87_REG_ALARMS1) + | (lm87_read_value(client, LM87_REG_ALARMS2) + << 8); + data->aout = lm87_read_value(client, LM87_REG_AOUT); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm87_init(void) +{ + return i2c_add_driver(&lm87_driver); +} + +static void __exit sensors_lm87_exit(void) +{ + i2c_del_driver(&lm87_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org> and others"); +MODULE_DESCRIPTION("LM87 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm87_init); +module_exit(sensors_lm87_exit); diff --git a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c new file mode 100644 index 000000000000..2c00ff83babc --- /dev/null +++ b/drivers/i2c/chips/lm90.c @@ -0,0 +1,626 @@ +/* + * lm90.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + * + * Based on the lm83 driver. The LM90 is a sensor chip made by National + * Semiconductor. It reports up to two temperatures (its own plus up to + * one external one) with a 0.125 deg resolution (1 deg for local + * temperature) and a 3-4 deg accuracy. Complete datasheet can be + * obtained from National's website at: + * http://www.national.com/pf/LM/LM90.html + * + * This driver also supports the LM89 and LM99, two other sensor chips + * made by National Semiconductor. Both have an increased remote + * temperature measurement accuracy (1 degree), and the LM99 + * additionally shifts remote temperatures (measured and limits) by 16 + * degrees, which allows for higher temperatures measurement. The + * driver doesn't handle it since it can be done easily in user-space. + * Complete datasheets can be obtained from National's website at: + * http://www.national.com/pf/LM/LM89.html + * http://www.national.com/pf/LM/LM99.html + * Note that there is no way to differenciate between both chips. + * + * This driver also supports the LM86, another sensor chip made by + * National Semiconductor. It is exactly similar to the LM90 except it + * has a higher accuracy. + * Complete datasheet can be obtained from National's website at: + * http://www.national.com/pf/LM/LM86.html + * + * This driver also supports the ADM1032, a sensor chip made by Analog + * Devices. That chip is similar to the LM90, with a few differences + * that are not handled by this driver. Complete datasheet can be + * obtained from Analog's website at: + * http://products.analog.com/products/info.asp?product=ADM1032 + * Among others, it has a higher accuracy than the LM90, much like the + * LM86 does. + * + * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor + * chips made by Maxim. These chips are similar to the LM86. Complete + * datasheet can be obtained at Maxim's website at: + * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + * Note that there is no easy way to differenciate between the three + * variants. The extra address and features of the MAX6659 are not + * supported by this driver. + * + * This driver also supports the ADT7461 chip from Analog Devices but + * only in its "compatability mode". If an ADT7461 chip is found but + * is configured in non-compatible mode (where its temperature + * register values are decoded differently) it is ignored by this + * driver. Complete datasheet can be obtained from Analog's website + * at: + * http://products.analog.com/products/info.asp?product=ADT7461 + * + * Since the LM90 was the first chipset supported by this driver, most + * comments will refer to this chipset, but are actually general and + * concern all supported chipsets, unless mentioned otherwise. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* + * Addresses to scan + * Address is fully defined internally and cannot be changed except for + * MAX6659. + * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c. + * LM89-1, and LM99-1 have address 0x4d. + * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported). + * ADT7461 always has address 0x4c. + */ + +static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461); + +/* + * The LM90 registers + */ + +#define LM90_REG_R_MAN_ID 0xFE +#define LM90_REG_R_CHIP_ID 0xFF +#define LM90_REG_R_CONFIG1 0x03 +#define LM90_REG_W_CONFIG1 0x09 +#define LM90_REG_R_CONFIG2 0xBF +#define LM90_REG_W_CONFIG2 0xBF +#define LM90_REG_R_CONVRATE 0x04 +#define LM90_REG_W_CONVRATE 0x0A +#define LM90_REG_R_STATUS 0x02 +#define LM90_REG_R_LOCAL_TEMP 0x00 +#define LM90_REG_R_LOCAL_HIGH 0x05 +#define LM90_REG_W_LOCAL_HIGH 0x0B +#define LM90_REG_R_LOCAL_LOW 0x06 +#define LM90_REG_W_LOCAL_LOW 0x0C +#define LM90_REG_R_LOCAL_CRIT 0x20 +#define LM90_REG_W_LOCAL_CRIT 0x20 +#define LM90_REG_R_REMOTE_TEMPH 0x01 +#define LM90_REG_R_REMOTE_TEMPL 0x10 +#define LM90_REG_R_REMOTE_OFFSH 0x11 +#define LM90_REG_W_REMOTE_OFFSH 0x11 +#define LM90_REG_R_REMOTE_OFFSL 0x12 +#define LM90_REG_W_REMOTE_OFFSL 0x12 +#define LM90_REG_R_REMOTE_HIGHH 0x07 +#define LM90_REG_W_REMOTE_HIGHH 0x0D +#define LM90_REG_R_REMOTE_HIGHL 0x13 +#define LM90_REG_W_REMOTE_HIGHL 0x13 +#define LM90_REG_R_REMOTE_LOWH 0x08 +#define LM90_REG_W_REMOTE_LOWH 0x0E +#define LM90_REG_R_REMOTE_LOWL 0x14 +#define LM90_REG_W_REMOTE_LOWL 0x14 +#define LM90_REG_R_REMOTE_CRIT 0x19 +#define LM90_REG_W_REMOTE_CRIT 0x19 +#define LM90_REG_R_TCRIT_HYST 0x21 +#define LM90_REG_W_TCRIT_HYST 0x21 + +/* + * Conversions and various macros + * For local temperatures and limits, critical limits and the hysteresis + * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celcius. + * For remote temperatures and limits, it uses signed 11-bit values with + * LSB = 0.125 degree Celcius, left-justified in 16-bit registers. + */ + +#define TEMP1_FROM_REG(val) ((val) * 1000) +#define TEMP1_TO_REG(val) ((val) <= -128000 ? -128 : \ + (val) >= 127000 ? 127 : \ + (val) < 0 ? ((val) - 500) / 1000 : \ + ((val) + 500) / 1000) +#define TEMP2_FROM_REG(val) ((val) / 32 * 125) +#define TEMP2_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ + (val) >= 127875 ? 0x7FE0 : \ + (val) < 0 ? ((val) - 62) / 125 * 32 : \ + ((val) + 62) / 125 * 32) +#define HYST_TO_REG(val) ((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \ + ((val) + 500) / 1000) + +/* + * ADT7461 is almost identical to LM90 except that attempts to write + * values that are outside the range 0 < temp < 127 are treated as + * the boundary value. + */ + +#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \ + (val) >= 127000 ? 127 : \ + ((val) + 500) / 1000) +#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \ + (val) >= 127750 ? 0x7FC0 : \ + ((val) + 125) / 250 * 64) + +/* + * Functions declaration + */ + +static int lm90_attach_adapter(struct i2c_adapter *adapter); +static int lm90_detect(struct i2c_adapter *adapter, int address, + int kind); +static void lm90_init_client(struct i2c_client *client); +static int lm90_detach_client(struct i2c_client *client); +static struct lm90_data *lm90_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver lm90_driver = { + .owner = THIS_MODULE, + .name = "lm90", + .id = I2C_DRIVERID_LM90, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm90_attach_adapter, + .detach_client = lm90_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct lm90_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + int kind; + + /* registers values */ + s8 temp_input1, temp_low1, temp_high1; /* local */ + s16 temp_input2, temp_low2, temp_high2; /* remote, combined */ + s8 temp_crit1, temp_crit2; + u8 temp_hyst; + u8 alarms; /* bitvector */ +}; + +/* + * Sysfs stuff + */ + +#define show_temp(value, converter) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm90_data *data = lm90_update_device(dev); \ + return sprintf(buf, "%d\n", converter(data->value)); \ +} +show_temp(temp_input1, TEMP1_FROM_REG); +show_temp(temp_input2, TEMP2_FROM_REG); +show_temp(temp_low1, TEMP1_FROM_REG); +show_temp(temp_low2, TEMP2_FROM_REG); +show_temp(temp_high1, TEMP1_FROM_REG); +show_temp(temp_high2, TEMP2_FROM_REG); +show_temp(temp_crit1, TEMP1_FROM_REG); +show_temp(temp_crit2, TEMP1_FROM_REG); + +#define set_temp1(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm90_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + if (data->kind == adt7461) \ + data->value = TEMP1_TO_REG_ADT7461(val); \ + else \ + data->value = TEMP1_TO_REG(val); \ + i2c_smbus_write_byte_data(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} +#define set_temp2(value, regh, regl) \ +static ssize_t set_##value(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm90_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + if (data->kind == adt7461) \ + data->value = TEMP2_TO_REG_ADT7461(val); \ + else \ + data->value = TEMP2_TO_REG(val); \ + i2c_smbus_write_byte_data(client, regh, data->value >> 8); \ + i2c_smbus_write_byte_data(client, regl, data->value & 0xff); \ + up(&data->update_lock); \ + return count; \ +} +set_temp1(temp_low1, LM90_REG_W_LOCAL_LOW); +set_temp2(temp_low2, LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL); +set_temp1(temp_high1, LM90_REG_W_LOCAL_HIGH); +set_temp2(temp_high2, LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL); +set_temp1(temp_crit1, LM90_REG_W_LOCAL_CRIT); +set_temp1(temp_crit2, LM90_REG_W_REMOTE_CRIT); + +#define show_temp_hyst(value, basereg) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm90_data *data = lm90_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->basereg) \ + - TEMP1_FROM_REG(data->temp_hyst)); \ +} +show_temp_hyst(temp_hyst1, temp_crit1); +show_temp_hyst(temp_hyst2, temp_crit2); + +static ssize_t set_temp_hyst1(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm90_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + long hyst; + + down(&data->update_lock); + hyst = TEMP1_FROM_REG(data->temp_crit1) - val; + i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, + HYST_TO_REG(hyst)); + up(&data->update_lock); + return count; +} + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct lm90_data *data = lm90_update_device(dev); + return sprintf(buf, "%d\n", data->alarms); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); +static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); +static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_low1, + set_temp_low1); +static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, + set_temp_low2); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1, + set_temp_high1); +static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, + set_temp_high2); +static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit1, + set_temp_crit1); +static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, + set_temp_crit2); +static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst1, + set_temp_hyst1); +static DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_hyst2, NULL); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* + * Real code + */ + +static int lm90_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm90_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm90_data *data; + int err = 0; + const char *name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm90_data)); + + /* The common I2C client data is placed right before the + LM90-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm90_driver; + new_client->flags = 0; + + /* + * Now we do the remaining detection. A negative kind means that + * the driver was loaded with no force parameter (default), so we + * must both detect and identify the chip. A zero kind means that + * the driver was loaded with the force parameter, the detection + * step shall be skipped. A positive kind means that the driver + * was loaded with the force parameter and a given kind of chip is + * requested, so both the detection and the identification steps + * are skipped. + */ + + /* Default to an LM90 if forced */ + if (kind == 0) + kind = lm90; + + if (kind < 0) { /* detection and identification */ + u8 man_id, chip_id, reg_config1, reg_convrate; + + man_id = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_MAN_ID); + chip_id = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CHIP_ID); + reg_config1 = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONFIG1); + reg_convrate = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONVRATE); + + if (man_id == 0x01) { /* National Semiconductor */ + u8 reg_config2; + + reg_config2 = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONFIG2); + + if ((reg_config1 & 0x2A) == 0x00 + && (reg_config2 & 0xF8) == 0x00 + && reg_convrate <= 0x09) { + if (address == 0x4C + && (chip_id & 0xF0) == 0x20) { /* LM90 */ + kind = lm90; + } else + if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */ + kind = lm99; + } else + if (address == 0x4C + && (chip_id & 0xF0) == 0x10) { /* LM86 */ + kind = lm86; + } + } + } else + if (man_id == 0x41) { /* Analog Devices */ + if (address == 0x4C + && (chip_id & 0xF0) == 0x40 /* ADM1032 */ + && (reg_config1 & 0x3F) == 0x00 + && reg_convrate <= 0x0A) { + kind = adm1032; + } else + if (address == 0x4c + && chip_id == 0x51 /* ADT7461 */ + && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ + && reg_convrate <= 0x0A) { + kind = adt7461; + } + } else + if (man_id == 0x4D) { /* Maxim */ + /* + * The Maxim variants do NOT have a chip_id register. + * Reading from that address will return the last read + * value, which in our case is those of the man_id + * register. Likewise, the config1 register seems to + * lack a low nibble, so the value will be those of the + * previous read, so in our case those of the man_id + * register. + */ + if (chip_id == man_id + && (reg_config1 & 0x1F) == (man_id & 0x0F) + && reg_convrate <= 0x09) { + kind = max6657; + } + } + + if (kind <= 0) { /* identification failed */ + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%02X, " + "chip_id=0x%02X).\n", man_id, chip_id); + goto exit_free; + } + } + + if (kind == lm90) { + name = "lm90"; + } else if (kind == adm1032) { + name = "adm1032"; + } else if (kind == lm99) { + name = "lm99"; + } else if (kind == lm86) { + name = "lm86"; + } else if (kind == max6657) { + name = "max6657"; + } else if (kind == adt7461) { + name = "adt7461"; + } + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + data->kind = kind; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the LM90 chip */ + lm90_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static void lm90_init_client(struct i2c_client *client) +{ + u8 config; + + /* + * Start the conversions. + */ + i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, + 5); /* 2 Hz */ + config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1); + if (config & 0x40) + i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, + config & 0xBF); /* run */ +} + +static int lm90_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct lm90_data *lm90_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm90_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { + u8 oldh, newh; + + dev_dbg(&client->dev, "Updating lm90 data.\n"); + data->temp_input1 = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_TEMP); + data->temp_high1 = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_HIGH); + data->temp_low1 = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_LOW); + data->temp_crit1 = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_CRIT); + data->temp_crit2 = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_CRIT); + data->temp_hyst = i2c_smbus_read_byte_data(client, + LM90_REG_R_TCRIT_HYST); + + /* + * There is a trick here. We have to read two registers to + * have the remote sensor temperature, but we have to beware + * a conversion could occur inbetween the readings. The + * datasheet says we should either use the one-shot + * conversion register, which we don't want to do (disables + * hardware monitoring) or monitor the busy bit, which is + * impossible (we can't read the values and monitor that bit + * at the exact same time). So the solution used here is to + * read the high byte once, then the low byte, then the high + * byte again. If the new high byte matches the old one, + * then we have a valid reading. Else we have to read the low + * byte again, and now we believe we have a correct reading. + */ + oldh = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_TEMPH); + data->temp_input2 = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_TEMPL); + newh = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_TEMPH); + if (newh != oldh) { + data->temp_input2 = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_TEMPL); +#ifdef DEBUG + oldh = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_TEMPH); + /* oldh is actually newer */ + if (newh != oldh) + dev_warn(&client->dev, "Remote temperature may be " + "wrong.\n"); +#endif + } + data->temp_input2 |= (newh << 8); + + data->temp_high2 = (i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_HIGHH) << 8) + + i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_HIGHL); + data->temp_low2 = (i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_LOWH) << 8) + + i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_LOWL); + data->alarms = i2c_smbus_read_byte_data(client, + LM90_REG_R_STATUS); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm90_init(void) +{ + return i2c_add_driver(&lm90_driver); +} + +static void __exit sensors_lm90_exit(void) +{ + i2c_del_driver(&lm90_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("LM90/ADM1032 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm90_init); +module_exit(sensors_lm90_exit); diff --git a/drivers/i2c/chips/lm92.c b/drivers/i2c/chips/lm92.c new file mode 100644 index 000000000000..fe6e83d70a72 --- /dev/null +++ b/drivers/i2c/chips/lm92.c @@ -0,0 +1,429 @@ +/* + * lm92 - Hardware monitoring driver + * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> + * + * Based on the lm90 driver, with some ideas taken from the lm_sensors + * lm92 driver as well. + * + * The LM92 is a sensor chip made by National Semiconductor. It reports + * its own temperature with a 0.0625 deg resolution and a 0.33 deg + * accuracy. Complete datasheet can be obtained from National's website + * at: + * http://www.national.com/pf/LM/LM92.html + * + * This driver also supports the MAX6635 sensor chip made by Maxim. + * This chip is compatible with the LM92, but has a lesser accuracy + * (1.0 deg). Complete datasheet can be obtained from Maxim's website + * at: + * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 + * + * Since the LM92 was the first chipset supported by this driver, most + * comments will refer to this chipset, but are actually general and + * concern all supported chipsets, unless mentioned otherwise. + * + * Support could easily be added for the National Semiconductor LM76 + * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible + * with the LM92. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + + +/* The LM92 and MAX6635 have 2 two-state pins for address selection, + resulting in 4 possible addresses. */ +static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, + I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(lm92); + +/* The LM92 registers */ +#define LM92_REG_CONFIG 0x01 /* 8-bit, RW */ +#define LM92_REG_TEMP 0x00 /* 16-bit, RO */ +#define LM92_REG_TEMP_HYST 0x02 /* 16-bit, RW */ +#define LM92_REG_TEMP_CRIT 0x03 /* 16-bit, RW */ +#define LM92_REG_TEMP_LOW 0x04 /* 16-bit, RW */ +#define LM92_REG_TEMP_HIGH 0x05 /* 16-bit, RW */ +#define LM92_REG_MAN_ID 0x07 /* 16-bit, RO, LM92 only */ + +/* The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius, + left-justified in 16-bit registers. No rounding is done, with such + a resolution it's just not worth it. Note that the MAX6635 doesn't + make use of the 4 lower bits for limits (i.e. effective resolution + for limits is 1 degree Celsius). */ +static inline int TEMP_FROM_REG(s16 reg) +{ + return reg / 8 * 625 / 10; +} + +static inline s16 TEMP_TO_REG(int val) +{ + if (val <= -60000) + return -60000 * 10 / 625 * 8; + if (val >= 160000) + return 160000 * 10 / 625 * 8; + return val * 10 / 625 * 8; +} + +/* Alarm flags are stored in the 3 LSB of the temperature register */ +static inline u8 ALARMS_FROM_REG(s16 reg) +{ + return reg & 0x0007; +} + +/* Driver data (common to all clients) */ +static struct i2c_driver lm92_driver; + +/* Client data (each client gets its own) */ +struct lm92_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + s16 temp1_input, temp1_crit, temp1_min, temp1_max, temp1_hyst; +}; + + +/* + * Sysfs attributes and callback functions + */ + +static struct lm92_data *lm92_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm92_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) + || !data->valid) { + dev_dbg(&client->dev, "Updating lm92 data\n"); + data->temp1_input = swab16(i2c_smbus_read_word_data(client, + LM92_REG_TEMP)); + data->temp1_hyst = swab16(i2c_smbus_read_word_data(client, + LM92_REG_TEMP_HYST)); + data->temp1_crit = swab16(i2c_smbus_read_word_data(client, + LM92_REG_TEMP_CRIT)); + data->temp1_min = swab16(i2c_smbus_read_word_data(client, + LM92_REG_TEMP_LOW)); + data->temp1_max = swab16(i2c_smbus_read_word_data(client, + LM92_REG_TEMP_HIGH)); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +#define show_temp(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct lm92_data *data = lm92_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ +} +show_temp(temp1_input); +show_temp(temp1_crit); +show_temp(temp1_min); +show_temp(temp1_max); + +#define set_temp(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm92_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP_TO_REG(val); \ + i2c_smbus_write_word_data(client, reg, swab16(data->value)); \ + up(&data->update_lock); \ + return count; \ +} +set_temp(temp1_crit, LM92_REG_TEMP_CRIT); +set_temp(temp1_min, LM92_REG_TEMP_LOW); +set_temp(temp1_max, LM92_REG_TEMP_HIGH); + +static ssize_t show_temp1_crit_hyst(struct device *dev, char *buf) +{ + struct lm92_data *data = lm92_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_crit) + - TEMP_FROM_REG(data->temp1_hyst)); +} +static ssize_t show_temp1_max_hyst(struct device *dev, char *buf) +{ + struct lm92_data *data = lm92_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_max) + - TEMP_FROM_REG(data->temp1_hyst)); +} +static ssize_t show_temp1_min_hyst(struct device *dev, char *buf) +{ + struct lm92_data *data = lm92_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_min) + + TEMP_FROM_REG(data->temp1_hyst)); +} + +static ssize_t set_temp1_crit_hyst(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm92_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val; + i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST, + swab16(TEMP_TO_REG(data->temp1_hyst))); + up(&data->update_lock); + return count; +} + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct lm92_data *data = lm92_update_device(dev); + return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input)); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL); +static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp1_crit, + set_temp1_crit); +static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp1_crit_hyst, + set_temp1_crit_hyst); +static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp1_min, + set_temp1_min); +static DEVICE_ATTR(temp1_min_hyst, S_IRUGO, show_temp1_min_hyst, NULL); +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_max, + set_temp1_max); +static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp1_max_hyst, NULL); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + + +/* + * Detection and registration + */ + +static void lm92_init_client(struct i2c_client *client) +{ + u8 config; + + /* Start the conversions if needed */ + config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); + if (config & 0x01) + i2c_smbus_write_byte_data(client, LM92_REG_CONFIG, + config & 0xFE); +} + +/* The MAX6635 has no identification register, so we have to use tricks + to identify it reliably. This is somewhat slow. + Note that we do NOT rely on the 2 MSB of the configuration register + always reading 0, as suggested by the datasheet, because it was once + reported not to be true. */ +static int max6635_check(struct i2c_client *client) +{ + u16 temp_low, temp_high, temp_hyst, temp_crit; + u8 conf; + int i; + + /* No manufacturer ID register, so a read from this address will + always return the last read value. */ + temp_low = i2c_smbus_read_word_data(client, LM92_REG_TEMP_LOW); + if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_low) + return 0; + temp_high = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HIGH); + if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_high) + return 0; + + /* Limits are stored as integer values (signed, 9-bit). */ + if ((temp_low & 0x7f00) || (temp_high & 0x7f00)) + return 0; + temp_hyst = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HYST); + temp_crit = i2c_smbus_read_word_data(client, LM92_REG_TEMP_CRIT); + if ((temp_hyst & 0x7f00) || (temp_crit & 0x7f00)) + return 0; + + /* Registers addresses were found to cycle over 16-byte boundaries. + We don't test all registers with all offsets so as to save some + reads and time, but this should still be sufficient to dismiss + non-MAX6635 chips. */ + conf = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); + for (i=16; i<96; i*=2) { + if (temp_hyst != i2c_smbus_read_word_data(client, + LM92_REG_TEMP_HYST + i - 16) + || temp_crit != i2c_smbus_read_word_data(client, + LM92_REG_TEMP_CRIT + i) + || temp_low != i2c_smbus_read_word_data(client, + LM92_REG_TEMP_LOW + i + 16) + || temp_high != i2c_smbus_read_word_data(client, + LM92_REG_TEMP_HIGH + i + 32) + || conf != i2c_smbus_read_byte_data(client, + LM92_REG_CONFIG + i)) + return 0; + } + + return 1; +} + +/* The following function does more than just detection. If detection + succeeds, it also registers the new chip. */ +static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm92_data *data; + int err = 0; + char *name; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm92_data)); + + /* Fill in enough client fields so that we can read from the chip, + which is required for identication */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm92_driver; + new_client->flags = 0; + + /* A negative kind means that the driver was loaded with no force + parameter (default), so we must identify the chip. */ + if (kind < 0) { + u8 config = i2c_smbus_read_byte_data(new_client, + LM92_REG_CONFIG); + u16 man_id = i2c_smbus_read_word_data(new_client, + LM92_REG_MAN_ID); + + if ((config & 0xe0) == 0x00 + && man_id == 0x0180) { + pr_info("lm92: Found National Semiconductor LM92 chip\n"); + kind = lm92; + } else + if (max6635_check(new_client)) { + pr_info("lm92: Found Maxim MAX6635 chip\n"); + kind = lm92; /* No separate prefix */ + } + else + goto exit_free; + } else + if (kind == 0) /* Default to an LM92 if forced */ + kind = lm92; + + /* Give it the proper name */ + if (kind == lm92) { + name = "lm92"; + } else { /* Supposedly cannot happen */ + dev_dbg(&new_client->dev, "Kind out of range?\n"); + goto exit_free; + } + + /* Fill in the remaining client fields */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the i2c subsystem a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the chipset */ + lm92_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int lm92_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm92_detect); +} + +static int lm92_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + + +/* + * Module and driver stuff + */ + +static struct i2c_driver lm92_driver = { + .owner = THIS_MODULE, + .name = "lm92", + .id = I2C_DRIVERID_LM92, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm92_attach_adapter, + .detach_client = lm92_detach_client, +}; + +static int __init sensors_lm92_init(void) +{ + return i2c_add_driver(&lm92_driver); +} + +static void __exit sensors_lm92_exit(void) +{ + i2c_del_driver(&lm92_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("LM92/MAX6635 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm92_init); +module_exit(sensors_lm92_exit); diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c new file mode 100644 index 000000000000..e771566dffa8 --- /dev/null +++ b/drivers/i2c/chips/m41t00.c @@ -0,0 +1,246 @@ +/* + * drivers/i2c/chips/m41t00.c + * + * I2C client/driver for the ST M41T00 Real-Time Clock chip. + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +/* + * This i2c client/driver wedges between the drivers/char/genrtc.c RTC + * interface and the SMBus interface of the i2c subsystem. + * It would be more efficient to use i2c msgs/i2c_transfer directly but, as + * recommened in .../Documentation/i2c/writing-clients section + * "Sending and receiving", using SMBus level communication is preferred. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/rtc.h> +#include <linux/bcd.h> + +#include <asm/time.h> +#include <asm/rtc.h> + +#define M41T00_DRV_NAME "m41t00" + +static DECLARE_MUTEX(m41t00_mutex); + +static struct i2c_driver m41t00_driver; +static struct i2c_client *save_client; + +static unsigned short ignore[] = { I2C_CLIENT_END }; +static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END }; + +static struct i2c_client_address_data addr_data = { + .normal_i2c = normal_addr, + .normal_i2c_range = ignore, + .probe = ignore, + .probe_range = ignore, + .ignore = ignore, + .ignore_range = ignore, + .force = ignore, +}; + +ulong +m41t00_get_rtc_time(void) +{ + s32 sec, min, hour, day, mon, year; + s32 sec1, min1, hour1, day1, mon1, year1; + ulong limit = 10; + + sec = min = hour = day = mon = year = 0; + sec1 = min1 = hour1 = day1 = mon1 = year1 = 0; + + down(&m41t00_mutex); + do { + if (((sec = i2c_smbus_read_byte_data(save_client, 0)) >= 0) + && ((min = i2c_smbus_read_byte_data(save_client, 1)) + >= 0) + && ((hour = i2c_smbus_read_byte_data(save_client, 2)) + >= 0) + && ((day = i2c_smbus_read_byte_data(save_client, 4)) + >= 0) + && ((mon = i2c_smbus_read_byte_data(save_client, 5)) + >= 0) + && ((year = i2c_smbus_read_byte_data(save_client, 6)) + >= 0) + && ((sec == sec1) && (min == min1) && (hour == hour1) + && (day == day1) && (mon == mon1) + && (year == year1))) + + break; + + sec1 = sec; + min1 = min; + hour1 = hour; + day1 = day; + mon1 = mon; + year1 = year; + } while (--limit > 0); + up(&m41t00_mutex); + + if (limit == 0) { + dev_warn(&save_client->dev, + "m41t00: can't read rtc chip\n"); + sec = min = hour = day = mon = year = 0; + } + + sec &= 0x7f; + min &= 0x7f; + hour &= 0x3f; + day &= 0x3f; + mon &= 0x1f; + year &= 0xff; + + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + + year += 1900; + if (year < 1970) + year += 100; + + return mktime(year, mon, day, hour, min, sec); +} + +static void +m41t00_set_tlet(ulong arg) +{ + struct rtc_time tm; + ulong nowtime = *(ulong *)arg; + + to_tm(nowtime, &tm); + tm.tm_year = (tm.tm_year - 1900) % 100; + + BIN_TO_BCD(tm.tm_sec); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_mon); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_year); + + down(&m41t00_mutex); + if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0) + || (i2c_smbus_write_byte_data(save_client, 1, tm.tm_min & 0x7f) + < 0) + || (i2c_smbus_write_byte_data(save_client, 2, tm.tm_hour & 0x7f) + < 0) + || (i2c_smbus_write_byte_data(save_client, 4, tm.tm_mday & 0x7f) + < 0) + || (i2c_smbus_write_byte_data(save_client, 5, tm.tm_mon & 0x7f) + < 0) + || (i2c_smbus_write_byte_data(save_client, 6, tm.tm_year & 0x7f) + < 0)) + + dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n"); + + up(&m41t00_mutex); + return; +} + +ulong new_time; + +DECLARE_TASKLET_DISABLED(m41t00_tasklet, m41t00_set_tlet, (ulong)&new_time); + +int +m41t00_set_rtc_time(ulong nowtime) +{ + new_time = nowtime; + + if (in_interrupt()) + tasklet_schedule(&m41t00_tasklet); + else + m41t00_set_tlet((ulong)&new_time); + + return 0; +} + +/* + ***************************************************************************** + * + * Driver Interface + * + ***************************************************************************** + */ +static int +m41t00_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct i2c_client *client; + int rc; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!client) + return -ENOMEM; + + memset(client, 0, sizeof(struct i2c_client)); + strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE); + client->flags = I2C_DF_NOTIFY; + client->addr = addr; + client->adapter = adap; + client->driver = &m41t00_driver; + + if ((rc = i2c_attach_client(client)) != 0) { + kfree(client); + return rc; + } + + save_client = client; + return 0; +} + +static int +m41t00_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, m41t00_probe); +} + +static int +m41t00_detach(struct i2c_client *client) +{ + int rc; + + if ((rc = i2c_detach_client(client)) == 0) { + kfree(i2c_get_clientdata(client)); + tasklet_kill(&m41t00_tasklet); + } + return rc; +} + +static struct i2c_driver m41t00_driver = { + .owner = THIS_MODULE, + .name = M41T00_DRV_NAME, + .id = I2C_DRIVERID_STM41T00, + .flags = I2C_DF_NOTIFY, + .attach_adapter = m41t00_attach, + .detach_client = m41t00_detach, +}; + +static int __init +m41t00_init(void) +{ + return i2c_add_driver(&m41t00_driver); +} + +static void __exit +m41t00_exit(void) +{ + i2c_del_driver(&m41t00_driver); + return; +} + +module_init(m41t00_init); +module_exit(m41t00_exit); + +MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>"); +MODULE_DESCRIPTION("ST Microelectronics M41T00 RTC I2C Client Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/chips/max1619.c b/drivers/i2c/chips/max1619.c new file mode 100644 index 000000000000..5afa961a5e10 --- /dev/null +++ b/drivers/i2c/chips/max1619.c @@ -0,0 +1,373 @@ +/* + * max1619.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru> + * Jean Delvare <khali@linux-fr.org> + * + * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. + * It reports up to two temperatures (its own plus up to + * one external one). Complete datasheet can be + * obtained from Maxim's website at: + * http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + + +static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, + 0x29, 0x2a, 0x2b, + 0x4c, 0x4d, 0x4e, + I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(max1619); + +/* + * The MAX1619 registers + */ + +#define MAX1619_REG_R_MAN_ID 0xFE +#define MAX1619_REG_R_CHIP_ID 0xFF +#define MAX1619_REG_R_CONFIG 0x03 +#define MAX1619_REG_W_CONFIG 0x09 +#define MAX1619_REG_R_CONVRATE 0x04 +#define MAX1619_REG_W_CONVRATE 0x0A +#define MAX1619_REG_R_STATUS 0x02 +#define MAX1619_REG_R_LOCAL_TEMP 0x00 +#define MAX1619_REG_R_REMOTE_TEMP 0x01 +#define MAX1619_REG_R_REMOTE_HIGH 0x07 +#define MAX1619_REG_W_REMOTE_HIGH 0x0D +#define MAX1619_REG_R_REMOTE_LOW 0x08 +#define MAX1619_REG_W_REMOTE_LOW 0x0E +#define MAX1619_REG_R_REMOTE_CRIT 0x10 +#define MAX1619_REG_W_REMOTE_CRIT 0x12 +#define MAX1619_REG_R_TCRIT_HYST 0x11 +#define MAX1619_REG_W_TCRIT_HYST 0x13 + +/* + * Conversions and various macros + */ + +#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) +#define TEMP_TO_REG(val) ((val < 0 ? val+0x100*1000 : val) / 1000) + +/* + * Functions declaration + */ + +static int max1619_attach_adapter(struct i2c_adapter *adapter); +static int max1619_detect(struct i2c_adapter *adapter, int address, + int kind); +static void max1619_init_client(struct i2c_client *client); +static int max1619_detach_client(struct i2c_client *client); +static struct max1619_data *max1619_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver max1619_driver = { + .owner = THIS_MODULE, + .name = "max1619", + .flags = I2C_DF_NOTIFY, + .attach_adapter = max1619_attach_adapter, + .detach_client = max1619_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct max1619_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + u8 temp_input1; /* local */ + u8 temp_input2, temp_low2, temp_high2; /* remote */ + u8 temp_crit2; + u8 temp_hyst2; + u8 alarms; +}; + +/* + * Sysfs stuff + */ + +#define show_temp(value) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct max1619_data *data = max1619_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ +} +show_temp(temp_input1); +show_temp(temp_input2); +show_temp(temp_low2); +show_temp(temp_high2); +show_temp(temp_crit2); +show_temp(temp_hyst2); + +#define set_temp2(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct max1619_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP_TO_REG(val); \ + i2c_smbus_write_byte_data(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} + +set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW); +set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH); +set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT); +set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST); + +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct max1619_data *data = max1619_update_device(dev); + return sprintf(buf, "%d\n", data->alarms); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); +static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); +static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, + set_temp_low2); +static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, + set_temp_high2); +static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, + set_temp_crit2); +static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, + set_temp_hyst2); +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* + * Real code + */ + +static int max1619_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, max1619_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct max1619_data *data; + int err = 0; + const char *name = ""; + u8 reg_config=0, reg_convrate=0, reg_status=0; + u8 man_id, chip_id; + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct max1619_data)); + + /* The common I2C client data is placed right before the + MAX1619-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &max1619_driver; + new_client->flags = 0; + + /* + * Now we do the remaining detection. A negative kind means that + * the driver was loaded with no force parameter (default), so we + * must both detect and identify the chip. A zero kind means that + * the driver was loaded with the force parameter, the detection + * step shall be skipped. A positive kind means that the driver + * was loaded with the force parameter and a given kind of chip is + * requested, so both the detection and the identification steps + * are skipped. + */ + if (kind < 0) { /* detection */ + reg_config = i2c_smbus_read_byte_data(new_client, + MAX1619_REG_R_CONFIG); + reg_convrate = i2c_smbus_read_byte_data(new_client, + MAX1619_REG_R_CONVRATE); + reg_status = i2c_smbus_read_byte_data(new_client, + MAX1619_REG_R_STATUS); + if ((reg_config & 0x03) != 0x00 + || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) { + dev_dbg(&adapter->dev, + "MAX1619 detection failed at 0x%02x.\n", + address); + goto exit_free; + } + } + + if (kind <= 0) { /* identification */ + + man_id = i2c_smbus_read_byte_data(new_client, + MAX1619_REG_R_MAN_ID); + chip_id = i2c_smbus_read_byte_data(new_client, + MAX1619_REG_R_CHIP_ID); + + if ((man_id == 0x4D) && (chip_id == 0x04)){ + kind = max1619; + } + } + + if (kind <= 0) { /* identification failed */ + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%02X, " + "chip_id=0x%02X).\n", man_id, chip_id); + goto exit_free; + } + + + if (kind == max1619){ + name = "max1619"; + } + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the MAX1619 chip */ + max1619_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static void max1619_init_client(struct i2c_client *client) +{ + u8 config; + + /* + * Start the conversions. + */ + i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, + 5); /* 2 Hz */ + config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); + if (config & 0x40) + i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, + config & 0xBF); /* run */ +} + +static int max1619_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct max1619_data *max1619_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct max1619_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { + dev_dbg(&client->dev, "Updating max1619 data.\n"); + data->temp_input1 = i2c_smbus_read_byte_data(client, + MAX1619_REG_R_LOCAL_TEMP); + data->temp_input2 = i2c_smbus_read_byte_data(client, + MAX1619_REG_R_REMOTE_TEMP); + data->temp_high2 = i2c_smbus_read_byte_data(client, + MAX1619_REG_R_REMOTE_HIGH); + data->temp_low2 = i2c_smbus_read_byte_data(client, + MAX1619_REG_R_REMOTE_LOW); + data->temp_crit2 = i2c_smbus_read_byte_data(client, + MAX1619_REG_R_REMOTE_CRIT); + data->temp_hyst2 = i2c_smbus_read_byte_data(client, + MAX1619_REG_R_TCRIT_HYST); + data->alarms = i2c_smbus_read_byte_data(client, + MAX1619_REG_R_STATUS); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_max1619_init(void) +{ + return i2c_add_driver(&max1619_driver); +} + +static void __exit sensors_max1619_exit(void) +{ + i2c_del_driver(&max1619_driver); +} + +MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and" + "Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("MAX1619 sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_max1619_init); +module_exit(sensors_max1619_exit); diff --git a/drivers/i2c/chips/pc87360.c b/drivers/i2c/chips/pc87360.c new file mode 100644 index 000000000000..6d94c36c9218 --- /dev/null +++ b/drivers/i2c/chips/pc87360.c @@ -0,0 +1,1349 @@ +/* + * pc87360.c - Part of lm_sensors, Linux kernel modules + * for hardware monitoring + * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * + * Copied from smsc47m1.c: + * Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Supports the following chips: + * + * Chip #vin #fan #pwm #temp devid + * PC87360 - 2 2 - 0xE1 + * PC87363 - 2 2 - 0xE8 + * PC87364 - 3 3 - 0xE4 + * PC87365 11 3 3 2 0xE5 + * PC87366 11 3 3 3-4 0xE9 + * + * This driver assumes that no more than one chip is present, and one of + * the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F). + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> +#include <asm/io.h> + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; +static struct i2c_force_data forces[] = {{ NULL }}; +static u8 devid; +static unsigned int extra_isa[3]; +static u8 confreg[4]; + +enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 }; +static struct i2c_address_data addr_data = { + .normal_i2c = normal_i2c, + .normal_isa = normal_isa, + .forces = forces, +}; + +static int init = 1; +module_param(init, int, 0); +MODULE_PARM_DESC(init, + "Chip initialization level:\n" + " 0: None\n" + "*1: Forcibly enable internal voltage and temperature channels, except in9\n" + " 2: Forcibly enable all voltage and temperature channels, except in9\n" + " 3: Forcibly enable all voltage and temperature channels, including in9"); + +/* + * Super-I/O registers and operations + */ + +#define DEV 0x07 /* Register: Logical device select */ +#define DEVID 0x20 /* Register: Device ID */ +#define ACT 0x30 /* Register: Device activation */ +#define BASE 0x60 /* Register: Base address */ + +#define FSCM 0x09 /* Logical device: fans */ +#define VLM 0x0d /* Logical device: voltages */ +#define TMS 0x0e /* Logical device: temperatures */ +static const u8 logdev[3] = { FSCM, VLM, TMS }; + +#define LD_FAN 0 +#define LD_IN 1 +#define LD_TEMP 2 + +static inline void superio_outb(int sioaddr, int reg, int val) +{ + outb(reg, sioaddr); + outb(val, sioaddr+1); +} + +static inline int superio_inb(int sioaddr, int reg) +{ + outb(reg, sioaddr); + return inb(sioaddr+1); +} + +static inline void superio_exit(int sioaddr) +{ + outb(0x02, sioaddr); + outb(0x02, sioaddr+1); +} + +/* + * Logical devices + */ + +#define PC87360_EXTENT 0x10 +#define PC87365_REG_BANK 0x09 +#define NO_BANK 0xff + +/* + * Fan registers and conversions + */ + +/* nr has to be 0 or 1 (PC87360/87363) or 2 (PC87364/87365/87366) */ +#define PC87360_REG_PRESCALE(nr) (0x00 + 2 * (nr)) +#define PC87360_REG_PWM(nr) (0x01 + 2 * (nr)) +#define PC87360_REG_FAN_MIN(nr) (0x06 + 3 * (nr)) +#define PC87360_REG_FAN(nr) (0x07 + 3 * (nr)) +#define PC87360_REG_FAN_STATUS(nr) (0x08 + 3 * (nr)) + +#define FAN_FROM_REG(val,div) ((val) == 0 ? 0: \ + 480000 / ((val)*(div))) +#define FAN_TO_REG(val,div) ((val) <= 100 ? 0 : \ + 480000 / ((val)*(div))) +#define FAN_DIV_FROM_REG(val) (1 << ((val >> 5) & 0x03)) +#define FAN_STATUS_FROM_REG(val) ((val) & 0x07) + +#define FAN_CONFIG_MONITOR(val,nr) (((val) >> (2 + nr * 3)) & 1) +#define FAN_CONFIG_CONTROL(val,nr) (((val) >> (3 + nr * 3)) & 1) +#define FAN_CONFIG_INVERT(val,nr) (((val) >> (4 + nr * 3)) & 1) + +#define PWM_FROM_REG(val,inv) ((inv) ? 255 - (val) : (val)) +static inline u8 PWM_TO_REG(int val, int inv) +{ + if (inv) + val = 255 - val; + if (val < 0) + return 0; + if (val > 255) + return 255; + return val; +} + +/* + * Voltage registers and conversions + */ + +#define PC87365_REG_IN_CONVRATE 0x07 +#define PC87365_REG_IN_CONFIG 0x08 +#define PC87365_REG_IN 0x0B +#define PC87365_REG_IN_MIN 0x0D +#define PC87365_REG_IN_MAX 0x0C +#define PC87365_REG_IN_STATUS 0x0A +#define PC87365_REG_IN_ALARMS1 0x00 +#define PC87365_REG_IN_ALARMS2 0x01 +#define PC87365_REG_VID 0x06 + +#define IN_FROM_REG(val,ref) (((val) * (ref) + 128) / 256) +#define IN_TO_REG(val,ref) ((val) < 0 ? 0 : \ + (val)*256 >= (ref)*255 ? 255: \ + ((val) * 256 + (ref)/2) / (ref)) + +/* + * Temperature registers and conversions + */ + +#define PC87365_REG_TEMP_CONFIG 0x08 +#define PC87365_REG_TEMP 0x0B +#define PC87365_REG_TEMP_MIN 0x0D +#define PC87365_REG_TEMP_MAX 0x0C +#define PC87365_REG_TEMP_CRIT 0x0E +#define PC87365_REG_TEMP_STATUS 0x0A +#define PC87365_REG_TEMP_ALARMS 0x00 + +#define TEMP_FROM_REG(val) ((val) * 1000) +#define TEMP_TO_REG(val) ((val) < -55000 ? -55 : \ + (val) > 127000 ? 127 : \ + (val) < 0 ? ((val) - 500) / 1000 : \ + ((val) + 500) / 1000) + +/* + * Client data (each client gets its own) + */ + +struct pc87360_data { + struct i2c_client client; + struct semaphore lock; + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + int address[3]; + + u8 fannr, innr, tempnr; + + u8 fan[3]; /* Register value */ + u8 fan_min[3]; /* Register value */ + u8 fan_status[3]; /* Register value */ + u8 pwm[3]; /* Register value */ + u16 fan_conf; /* Configuration register values, combined */ + + u16 in_vref; /* 1 mV/bit */ + u8 in[14]; /* Register value */ + u8 in_min[14]; /* Register value */ + u8 in_max[14]; /* Register value */ + u8 in_crit[3]; /* Register value */ + u8 in_status[14]; /* Register value */ + u16 in_alarms; /* Register values, combined, masked */ + u8 vid_conf; /* Configuration register value */ + u8 vrm; + u8 vid; /* Register value */ + + s8 temp[3]; /* Register value */ + s8 temp_min[3]; /* Register value */ + s8 temp_max[3]; /* Register value */ + s8 temp_crit[3]; /* Register value */ + u8 temp_status[3]; /* Register value */ + u8 temp_alarms; /* Register value, masked */ +}; + +/* + * Functions declaration + */ + +static int pc87360_attach_adapter(struct i2c_adapter *adapter); +static int pc87360_detect(struct i2c_adapter *adapter, int address, int kind); +static int pc87360_detach_client(struct i2c_client *client); + +static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, + u8 reg); +static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, + u8 reg, u8 value); +static void pc87360_init_client(struct i2c_client *client, int use_thermistors); +static struct pc87360_data *pc87360_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver pc87360_driver = { + .owner = THIS_MODULE, + .name = "pc87360", + .flags = I2C_DF_NOTIFY, + .attach_adapter = pc87360_attach_adapter, + .detach_client = pc87360_detach_client, +}; + +/* + * Sysfs stuff + */ + +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long fan_min = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[nr])); + + /* If it wouldn't fit, change clock divisor */ + while (fan_min > 255 + && (data->fan_status[nr] & 0x60) != 0x60) { + fan_min >>= 1; + data->fan[nr] >>= 1; + data->fan_status[nr] += 0x20; + } + data->fan_min[nr] = fan_min > 255 ? 255 : fan_min; + pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(nr), + data->fan_min[nr]); + + /* Write new divider, preserve alarm bits */ + pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(nr), + data->fan_status[nr] & 0xF9); + up(&data->update_lock); + + return count; +} + +#define show_and_set_fan(offset) \ +static ssize_t show_fan##offset##_input(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[offset-1], \ + FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \ +} \ +static ssize_t show_fan##offset##_min(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[offset-1], \ + FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \ +} \ +static ssize_t show_fan##offset##_div(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", \ + FAN_DIV_FROM_REG(data->fan_status[offset-1])); \ +} \ +static ssize_t show_fan##offset##_status(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", \ + FAN_STATUS_FROM_REG(data->fan_status[offset-1])); \ +} \ +static ssize_t set_fan##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset-1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan##offset##_input, NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \ + show_fan##offset##_min, set_fan##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ + show_fan##offset##_div, NULL); \ +static DEVICE_ATTR(fan##offset##_status, S_IRUGO, \ + show_fan##offset##_status, NULL); +show_and_set_fan(1) +show_and_set_fan(2) +show_and_set_fan(3) + +#define show_and_set_pwm(offset) \ +static ssize_t show_pwm##offset(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", \ + PWM_FROM_REG(data->pwm[offset-1], \ + FAN_CONFIG_INVERT(data->fan_conf, \ + offset-1))); \ +} \ +static ssize_t set_pwm##offset(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->pwm[offset-1] = PWM_TO_REG(val, \ + FAN_CONFIG_INVERT(data->fan_conf, offset-1)); \ + pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(offset-1), \ + data->pwm[offset-1]); \ + up(&data->update_lock); \ + return count; \ +} \ +static DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \ + show_pwm##offset, set_pwm##offset); +show_and_set_pwm(1) +show_and_set_pwm(2) +show_and_set_pwm(3) + +#define show_and_set_in(offset) \ +static ssize_t show_in##offset##_input(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ + data->in_vref)); \ +} \ +static ssize_t show_in##offset##_min(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ + data->in_vref)); \ +} \ +static ssize_t show_in##offset##_max(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ + data->in_vref)); \ +} \ +static ssize_t show_in##offset##_status(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", data->in_status[offset]); \ +} \ +static ssize_t set_in##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_min[offset] = IN_TO_REG(val, data->in_vref); \ + pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MIN, \ + data->in_min[offset]); \ + up(&data->update_lock); \ + return count; \ +} \ +static ssize_t set_in##offset##_max(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_max[offset] = IN_TO_REG(val, \ + data->in_vref); \ + pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MAX, \ + data->in_max[offset]); \ + up(&data->update_lock); \ + return count; \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in##offset##_input, NULL); \ +static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ + show_in##offset##_max, set_in##offset##_max); \ +static DEVICE_ATTR(in##offset##_status, S_IRUGO, \ + show_in##offset##_status, NULL); +show_and_set_in(0) +show_and_set_in(1) +show_and_set_in(2) +show_and_set_in(3) +show_and_set_in(4) +show_and_set_in(5) +show_and_set_in(6) +show_and_set_in(7) +show_and_set_in(8) +show_and_set_in(9) +show_and_set_in(10) + +#define show_and_set_therm(offset) \ +static ssize_t show_temp##offset##_input(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset+7], \ + data->in_vref)); \ +} \ +static ssize_t show_temp##offset##_min(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset+7], \ + data->in_vref)); \ +} \ +static ssize_t show_temp##offset##_max(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset+7], \ + data->in_vref)); \ +} \ +static ssize_t show_temp##offset##_crit(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[offset-4], \ + data->in_vref)); \ +} \ +static ssize_t show_temp##offset##_status(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%u\n", data->in_status[offset+7]); \ +} \ +static ssize_t set_temp##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_min[offset+7] = IN_TO_REG(val, data->in_vref); \ + pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MIN, \ + data->in_min[offset+7]); \ + up(&data->update_lock); \ + return count; \ +} \ +static ssize_t set_temp##offset##_max(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_max[offset+7] = IN_TO_REG(val, data->in_vref); \ + pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MAX, \ + data->in_max[offset+7]); \ + up(&data->update_lock); \ + return count; \ +} \ +static ssize_t set_temp##offset##_crit(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_crit[offset-4] = IN_TO_REG(val, data->in_vref); \ + pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_CRIT, \ + data->in_crit[offset-4]); \ + up(&data->update_lock); \ + return count; \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp##offset##_input, NULL); \ +static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ + show_temp##offset##_min, set_temp##offset##_min); \ +static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ + show_temp##offset##_max, set_temp##offset##_max); \ +static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ + show_temp##offset##_crit, set_temp##offset##_crit); \ +static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ + show_temp##offset##_status, NULL); +show_and_set_therm(4) +show_and_set_therm(5) +show_and_set_therm(6) + +static ssize_t show_vid(struct device *dev, char *buf) +{ + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); + +static ssize_t show_vrm(struct device *dev, char *buf) +{ + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", data->vrm); +} +static ssize_t set_vrm(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + data->vrm = simple_strtoul(buf, NULL, 10); + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); + +static ssize_t show_in_alarms(struct device *dev, char *buf) +{ + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", data->in_alarms); +} +static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL); + +#define show_and_set_temp(offset) \ +static ssize_t show_temp##offset##_input(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ +} \ +static ssize_t show_temp##offset##_min(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \ +} \ +static ssize_t show_temp##offset##_max(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \ +}\ +static ssize_t show_temp##offset##_crit(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[offset-1])); \ +}\ +static ssize_t show_temp##offset##_status(struct device *dev, char *buf) \ +{ \ + struct pc87360_data *data = pc87360_update_device(dev); \ + return sprintf(buf, "%d\n", data->temp_status[offset-1]); \ +}\ +static ssize_t set_temp##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->temp_min[offset-1] = TEMP_TO_REG(val); \ + pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MIN, \ + data->temp_min[offset-1]); \ + up(&data->update_lock); \ + return count; \ +} \ +static ssize_t set_temp##offset##_max(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->temp_max[offset-1] = TEMP_TO_REG(val); \ + pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MAX, \ + data->temp_max[offset-1]); \ + up(&data->update_lock); \ + return count; \ +} \ +static ssize_t set_temp##offset##_crit(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct pc87360_data *data = i2c_get_clientdata(client); \ + long val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->temp_crit[offset-1] = TEMP_TO_REG(val); \ + pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_CRIT, \ + data->temp_crit[offset-1]); \ + up(&data->update_lock); \ + return count; \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp##offset##_input, NULL); \ +static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ + show_temp##offset##_min, set_temp##offset##_min); \ +static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ + show_temp##offset##_max, set_temp##offset##_max); \ +static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ + show_temp##offset##_crit, set_temp##offset##_crit); \ +static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ + show_temp##offset##_status, NULL); +show_and_set_temp(1) +show_and_set_temp(2) +show_and_set_temp(3) + +static ssize_t show_temp_alarms(struct device *dev, char *buf) +{ + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", data->temp_alarms); +} +static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL); + +/* + * Device detection, registration and update + */ + +static int pc87360_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, pc87360_detect); +} + +static int pc87360_find(int sioaddr, u8 *devid, int *address) +{ + u16 val; + int i; + int nrdev; /* logical device count */ + + /* No superio_enter */ + + /* Identify device */ + val = superio_inb(sioaddr, DEVID); + switch (val) { + case 0xE1: /* PC87360 */ + case 0xE8: /* PC87363 */ + case 0xE4: /* PC87364 */ + nrdev = 1; + break; + case 0xE5: /* PC87365 */ + case 0xE9: /* PC87366 */ + nrdev = 3; + break; + default: + superio_exit(sioaddr); + return -ENODEV; + } + /* Remember the device id */ + *devid = val; + + for (i = 0; i < nrdev; i++) { + /* select logical device */ + superio_outb(sioaddr, DEV, logdev[i]); + + val = superio_inb(sioaddr, ACT); + if (!(val & 0x01)) { + printk(KERN_INFO "pc87360: Device 0x%02x not " + "activated\n", logdev[i]); + continue; + } + + val = (superio_inb(sioaddr, BASE) << 8) + | superio_inb(sioaddr, BASE + 1); + if (!val) { + printk(KERN_INFO "pc87360: Base address not set for " + "device 0x%02x\n", logdev[i]); + continue; + } + + address[i] = val; + + if (i==0) { /* Fans */ + confreg[0] = superio_inb(sioaddr, 0xF0); + confreg[1] = superio_inb(sioaddr, 0xF1); + +#ifdef DEBUG + printk(KERN_DEBUG "pc87360: Fan 1: mon=%d " + "ctrl=%d inv=%d\n", (confreg[0]>>2)&1, + (confreg[0]>>3)&1, (confreg[0]>>4)&1); + printk(KERN_DEBUG "pc87360: Fan 2: mon=%d " + "ctrl=%d inv=%d\n", (confreg[0]>>5)&1, + (confreg[0]>>6)&1, (confreg[0]>>7)&1); + printk(KERN_DEBUG "pc87360: Fan 3: mon=%d " + "ctrl=%d inv=%d\n", confreg[1]&1, + (confreg[1]>>1)&1, (confreg[1]>>2)&1); +#endif + } else if (i==1) { /* Voltages */ + /* Are we using thermistors? */ + if (*devid == 0xE9) { /* PC87366 */ + /* These registers are not logical-device + specific, just that we won't need them if + we don't use the VLM device */ + confreg[2] = superio_inb(sioaddr, 0x2B); + confreg[3] = superio_inb(sioaddr, 0x25); + + if (confreg[2] & 0x40) { + printk(KERN_INFO "pc87360: Using " + "thermistors for temperature " + "monitoring\n"); + } + if (confreg[3] & 0xE0) { + printk(KERN_INFO "pc87360: VID " + "inputs routed (mode %u)\n", + confreg[3] >> 5); + } + } + } + } + + superio_exit(sioaddr); + return 0; +} + +/* We don't really care about the address. + Read from extra_isa instead. */ +int pc87360_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i; + struct i2c_client *new_client; + struct pc87360_data *data; + int err = 0; + const char *name = "pc87360"; + int use_thermistors = 0; + + if (!i2c_is_isa_adapter(adapter)) + return -ENODEV; + + if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL))) + return -ENOMEM; + memset(data, 0x00, sizeof(struct pc87360_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + init_MUTEX(&data->lock); + new_client->adapter = adapter; + new_client->driver = &pc87360_driver; + new_client->flags = 0; + + data->fannr = 2; + data->innr = 0; + data->tempnr = 0; + + switch (devid) { + case 0xe8: + name = "pc87363"; + break; + case 0xe4: + name = "pc87364"; + data->fannr = 3; + break; + case 0xe5: + name = "pc87365"; + data->fannr = extra_isa[0] ? 3 : 0; + data->innr = extra_isa[1] ? 11 : 0; + data->tempnr = extra_isa[2] ? 2 : 0; + break; + case 0xe9: + name = "pc87366"; + data->fannr = extra_isa[0] ? 3 : 0; + data->innr = extra_isa[1] ? 14 : 0; + data->tempnr = extra_isa[2] ? 3 : 0; + break; + } + + strcpy(new_client->name, name); + data->valid = 0; + init_MUTEX(&data->update_lock); + + for (i = 0; i < 3; i++) { + if (((data->address[i] = extra_isa[i])) + && !request_region(extra_isa[i], PC87360_EXTENT, + pc87360_driver.name)) { + dev_err(&new_client->dev, "Region 0x%x-0x%x already " + "in use!\n", extra_isa[i], + extra_isa[i]+PC87360_EXTENT-1); + for (i--; i >= 0; i--) + release_region(extra_isa[i], PC87360_EXTENT); + err = -EBUSY; + goto ERROR1; + } + } + + /* Retrieve the fans configuration from Super-I/O space */ + if (data->fannr) + data->fan_conf = confreg[0] | (confreg[1] << 8); + + if ((err = i2c_attach_client(new_client))) + goto ERROR2; + + /* Use the correct reference voltage + Unless both the VLM and the TMS logical devices agree to + use an external Vref, the internal one is used. */ + if (data->innr) { + i = pc87360_read_value(data, LD_IN, NO_BANK, + PC87365_REG_IN_CONFIG); + if (data->tempnr) { + i &= pc87360_read_value(data, LD_TEMP, NO_BANK, + PC87365_REG_TEMP_CONFIG); + } + data->in_vref = (i&0x02) ? 3025 : 2966; + dev_dbg(&new_client->dev, "Using %s reference voltage\n", + (i&0x02) ? "external" : "internal"); + + data->vid_conf = confreg[3]; + data->vrm = 90; + } + + /* Fan clock dividers may be needed before any data is read */ + for (i = 0; i < data->fannr; i++) { + if (FAN_CONFIG_MONITOR(data->fan_conf, i)) + data->fan_status[i] = pc87360_read_value(data, + LD_FAN, NO_BANK, + PC87360_REG_FAN_STATUS(i)); + } + + if (init > 0) { + if (devid == 0xe9 && data->address[1]) /* PC87366 */ + use_thermistors = confreg[2] & 0x40; + + pc87360_init_client(new_client, use_thermistors); + } + + /* Register sysfs hooks */ + if (data->innr) { + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in6_input); + device_create_file(&new_client->dev, &dev_attr_in7_input); + device_create_file(&new_client->dev, &dev_attr_in8_input); + device_create_file(&new_client->dev, &dev_attr_in9_input); + device_create_file(&new_client->dev, &dev_attr_in10_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in6_min); + device_create_file(&new_client->dev, &dev_attr_in7_min); + device_create_file(&new_client->dev, &dev_attr_in8_min); + device_create_file(&new_client->dev, &dev_attr_in9_min); + device_create_file(&new_client->dev, &dev_attr_in10_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_in5_max); + device_create_file(&new_client->dev, &dev_attr_in6_max); + device_create_file(&new_client->dev, &dev_attr_in7_max); + device_create_file(&new_client->dev, &dev_attr_in8_max); + device_create_file(&new_client->dev, &dev_attr_in9_max); + device_create_file(&new_client->dev, &dev_attr_in10_max); + device_create_file(&new_client->dev, &dev_attr_in0_status); + device_create_file(&new_client->dev, &dev_attr_in1_status); + device_create_file(&new_client->dev, &dev_attr_in2_status); + device_create_file(&new_client->dev, &dev_attr_in3_status); + device_create_file(&new_client->dev, &dev_attr_in4_status); + device_create_file(&new_client->dev, &dev_attr_in5_status); + device_create_file(&new_client->dev, &dev_attr_in6_status); + device_create_file(&new_client->dev, &dev_attr_in7_status); + device_create_file(&new_client->dev, &dev_attr_in8_status); + device_create_file(&new_client->dev, &dev_attr_in9_status); + device_create_file(&new_client->dev, &dev_attr_in10_status); + + device_create_file(&new_client->dev, &dev_attr_cpu0_vid); + device_create_file(&new_client->dev, &dev_attr_vrm); + device_create_file(&new_client->dev, &dev_attr_alarms_in); + } + + if (data->tempnr) { + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + device_create_file(&new_client->dev, &dev_attr_temp1_status); + device_create_file(&new_client->dev, &dev_attr_temp2_status); + + device_create_file(&new_client->dev, &dev_attr_alarms_temp); + } + if (data->tempnr == 3) { + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp3_min); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp3_crit); + device_create_file(&new_client->dev, &dev_attr_temp3_status); + } + if (data->innr == 14) { + device_create_file(&new_client->dev, &dev_attr_temp4_input); + device_create_file(&new_client->dev, &dev_attr_temp5_input); + device_create_file(&new_client->dev, &dev_attr_temp6_input); + device_create_file(&new_client->dev, &dev_attr_temp4_min); + device_create_file(&new_client->dev, &dev_attr_temp5_min); + device_create_file(&new_client->dev, &dev_attr_temp6_min); + device_create_file(&new_client->dev, &dev_attr_temp4_max); + device_create_file(&new_client->dev, &dev_attr_temp5_max); + device_create_file(&new_client->dev, &dev_attr_temp6_max); + device_create_file(&new_client->dev, &dev_attr_temp4_crit); + device_create_file(&new_client->dev, &dev_attr_temp5_crit); + device_create_file(&new_client->dev, &dev_attr_temp6_crit); + device_create_file(&new_client->dev, &dev_attr_temp4_status); + device_create_file(&new_client->dev, &dev_attr_temp5_status); + device_create_file(&new_client->dev, &dev_attr_temp6_status); + } + + if (data->fannr) { + if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) { + device_create_file(&new_client->dev, + &dev_attr_fan1_input); + device_create_file(&new_client->dev, + &dev_attr_fan1_min); + device_create_file(&new_client->dev, + &dev_attr_fan1_div); + device_create_file(&new_client->dev, + &dev_attr_fan1_status); + } + + if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) { + device_create_file(&new_client->dev, + &dev_attr_fan2_input); + device_create_file(&new_client->dev, + &dev_attr_fan2_min); + device_create_file(&new_client->dev, + &dev_attr_fan2_div); + device_create_file(&new_client->dev, + &dev_attr_fan2_status); + } + + if (FAN_CONFIG_CONTROL(data->fan_conf, 0)) + device_create_file(&new_client->dev, &dev_attr_pwm1); + if (FAN_CONFIG_CONTROL(data->fan_conf, 1)) + device_create_file(&new_client->dev, &dev_attr_pwm2); + } + if (data->fannr == 3) { + if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) { + device_create_file(&new_client->dev, + &dev_attr_fan3_input); + device_create_file(&new_client->dev, + &dev_attr_fan3_min); + device_create_file(&new_client->dev, + &dev_attr_fan3_div); + device_create_file(&new_client->dev, + &dev_attr_fan3_status); + } + + if (FAN_CONFIG_CONTROL(data->fan_conf, 2)) + device_create_file(&new_client->dev, &dev_attr_pwm3); + } + + return 0; + +ERROR2: + for (i = 0; i < 3; i++) { + if (data->address[i]) { + release_region(data->address[i], PC87360_EXTENT); + } + } +ERROR1: + kfree(data); + return err; +} + +static int pc87360_detach_client(struct i2c_client *client) +{ + struct pc87360_data *data = i2c_get_clientdata(client); + int i; + + if ((i = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return i; + } + + for (i = 0; i < 3; i++) { + if (data->address[i]) { + release_region(data->address[i], PC87360_EXTENT); + } + } + kfree(data); + + return 0; +} + +/* ldi is the logical device index + bank is for voltages and temperatures only */ +static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, + u8 reg) +{ + int res; + + down(&(data->lock)); + if (bank != NO_BANK) + outb_p(bank, data->address[ldi] + PC87365_REG_BANK); + res = inb_p(data->address[ldi] + reg); + up(&(data->lock)); + + return res; +} + +static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, + u8 reg, u8 value) +{ + down(&(data->lock)); + if (bank != NO_BANK) + outb_p(bank, data->address[ldi] + PC87365_REG_BANK); + outb_p(value, data->address[ldi] + reg); + up(&(data->lock)); +} + +static void pc87360_init_client(struct i2c_client *client, int use_thermistors) +{ + struct pc87360_data *data = i2c_get_clientdata(client); + int i, nr; + const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 }; + const u8 init_temp[3] = { 2, 2, 1 }; + u8 reg; + + if (init >= 2 && data->innr) { + reg = pc87360_read_value(data, LD_IN, NO_BANK, + PC87365_REG_IN_CONVRATE); + dev_info(&client->dev, "VLM conversion set to" + "1s period, 160us delay\n"); + pc87360_write_value(data, LD_IN, NO_BANK, + PC87365_REG_IN_CONVRATE, + (reg & 0xC0) | 0x11); + } + + nr = data->innr < 11 ? data->innr : 11; + for (i=0; i<nr; i++) { + if (init >= init_in[i]) { + /* Forcibly enable voltage channel */ + reg = pc87360_read_value(data, LD_IN, i, + PC87365_REG_IN_STATUS); + if (!(reg & 0x01)) { + dev_dbg(&client->dev, "Forcibly " + "enabling in%d\n", i); + pc87360_write_value(data, LD_IN, i, + PC87365_REG_IN_STATUS, + (reg & 0x68) | 0x87); + } + } + } + + /* We can't blindly trust the Super-I/O space configuration bit, + most BIOS won't set it properly */ + for (i=11; i<data->innr; i++) { + reg = pc87360_read_value(data, LD_IN, i, + PC87365_REG_TEMP_STATUS); + use_thermistors = use_thermistors || (reg & 0x01); + } + + i = use_thermistors ? 2 : 0; + for (; i<data->tempnr; i++) { + if (init >= init_temp[i]) { + /* Forcibly enable temperature channel */ + reg = pc87360_read_value(data, LD_TEMP, i, + PC87365_REG_TEMP_STATUS); + if (!(reg & 0x01)) { + dev_dbg(&client->dev, "Forcibly " + "enabling temp%d\n", i+1); + pc87360_write_value(data, LD_TEMP, i, + PC87365_REG_TEMP_STATUS, + 0xCF); + } + } + } + + if (use_thermistors) { + for (i=11; i<data->innr; i++) { + if (init >= init_in[i]) { + /* The pin may already be used by thermal + diodes */ + reg = pc87360_read_value(data, LD_TEMP, + (i-11)/2, PC87365_REG_TEMP_STATUS); + if (reg & 0x01) { + dev_dbg(&client->dev, "Skipping " + "temp%d, pin already in use " + "by temp%d\n", i-7, (i-11)/2); + continue; + } + + /* Forcibly enable thermistor channel */ + reg = pc87360_read_value(data, LD_IN, i, + PC87365_REG_IN_STATUS); + if (!(reg & 0x01)) { + dev_dbg(&client->dev, "Forcibly " + "enabling temp%d\n", i-7); + pc87360_write_value(data, LD_IN, i, + PC87365_REG_TEMP_STATUS, + (reg & 0x60) | 0x8F); + } + } + } + } + + if (data->innr) { + reg = pc87360_read_value(data, LD_IN, NO_BANK, + PC87365_REG_IN_CONFIG); + if (reg & 0x01) { + dev_dbg(&client->dev, "Forcibly " + "enabling monitoring (VLM)\n"); + pc87360_write_value(data, LD_IN, NO_BANK, + PC87365_REG_IN_CONFIG, + reg & 0xFE); + } + } + + if (data->tempnr) { + reg = pc87360_read_value(data, LD_TEMP, NO_BANK, + PC87365_REG_TEMP_CONFIG); + if (reg & 0x01) { + dev_dbg(&client->dev, "Forcibly enabling " + "monitoring (TMS)\n"); + pc87360_write_value(data, LD_TEMP, NO_BANK, + PC87365_REG_TEMP_CONFIG, + reg & 0xFE); + } + + if (init >= 2) { + /* Chip config as documented by National Semi. */ + pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08); + /* We voluntarily omit the bank here, in case the + sequence itself matters. It shouldn't be a problem, + since nobody else is supposed to access the + device at that point. */ + pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04); + pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35); + pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05); + pc87360_write_value(data, LD_TEMP, NO_BANK, 0xE, 0x05); + } + } +} + +static void pc87360_autodiv(struct i2c_client *client, int nr) +{ + struct pc87360_data *data = i2c_get_clientdata(client); + u8 old_min = data->fan_min[nr]; + + /* Increase clock divider if needed and possible */ + if ((data->fan_status[nr] & 0x04) /* overflow flag */ + || (data->fan[nr] >= 224)) { /* next to overflow */ + if ((data->fan_status[nr] & 0x60) != 0x60) { + data->fan_status[nr] += 0x20; + data->fan_min[nr] >>= 1; + data->fan[nr] >>= 1; + dev_dbg(&client->dev, "Increasing " + "clock divider to %d for fan %d\n", + FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1); + } + } else { + /* Decrease clock divider if possible */ + while (!(data->fan_min[nr] & 0x80) /* min "nails" divider */ + && data->fan[nr] < 85 /* bad accuracy */ + && (data->fan_status[nr] & 0x60) != 0x00) { + data->fan_status[nr] -= 0x20; + data->fan_min[nr] <<= 1; + data->fan[nr] <<= 1; + dev_dbg(&client->dev, "Decreasing " + "clock divider to %d for fan %d\n", + FAN_DIV_FROM_REG(data->fan_status[nr]), + nr+1); + } + } + + /* Write new fan min if it changed */ + if (old_min != data->fan_min[nr]) { + pc87360_write_value(data, LD_FAN, NO_BANK, + PC87360_REG_FAN_MIN(nr), + data->fan_min[nr]); + } +} + +static struct pc87360_data *pc87360_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + u8 i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { + dev_dbg(&client->dev, "Data update\n"); + + /* Fans */ + for (i = 0; i < data->fannr; i++) { + if (FAN_CONFIG_MONITOR(data->fan_conf, i)) { + data->fan_status[i] = + pc87360_read_value(data, LD_FAN, + NO_BANK, PC87360_REG_FAN_STATUS(i)); + data->fan[i] = pc87360_read_value(data, LD_FAN, + NO_BANK, PC87360_REG_FAN(i)); + data->fan_min[i] = pc87360_read_value(data, + LD_FAN, NO_BANK, + PC87360_REG_FAN_MIN(i)); + /* Change clock divider if needed */ + pc87360_autodiv(client, i); + /* Clear bits and write new divider */ + pc87360_write_value(data, LD_FAN, NO_BANK, + PC87360_REG_FAN_STATUS(i), + data->fan_status[i]); + } + if (FAN_CONFIG_CONTROL(data->fan_conf, i)) + data->pwm[i] = pc87360_read_value(data, LD_FAN, + NO_BANK, PC87360_REG_PWM(i)); + } + + /* Voltages */ + for (i = 0; i < data->innr; i++) { + data->in_status[i] = pc87360_read_value(data, LD_IN, i, + PC87365_REG_IN_STATUS); + /* Clear bits */ + pc87360_write_value(data, LD_IN, i, + PC87365_REG_IN_STATUS, + data->in_status[i]); + if ((data->in_status[i] & 0x81) == 0x81) { + data->in[i] = pc87360_read_value(data, LD_IN, + i, PC87365_REG_IN); + } + if (data->in_status[i] & 0x01) { + data->in_min[i] = pc87360_read_value(data, + LD_IN, i, + PC87365_REG_IN_MIN); + data->in_max[i] = pc87360_read_value(data, + LD_IN, i, + PC87365_REG_IN_MAX); + if (i >= 11) + data->in_crit[i-11] = + pc87360_read_value(data, LD_IN, + i, PC87365_REG_TEMP_CRIT); + } + } + if (data->innr) { + data->in_alarms = pc87360_read_value(data, LD_IN, + NO_BANK, PC87365_REG_IN_ALARMS1) + | ((pc87360_read_value(data, LD_IN, + NO_BANK, PC87365_REG_IN_ALARMS2) + & 0x07) << 8); + data->vid = (data->vid_conf & 0xE0) ? + pc87360_read_value(data, LD_IN, + NO_BANK, PC87365_REG_VID) : 0x1F; + } + + /* Temperatures */ + for (i = 0; i < data->tempnr; i++) { + data->temp_status[i] = pc87360_read_value(data, + LD_TEMP, i, + PC87365_REG_TEMP_STATUS); + /* Clear bits */ + pc87360_write_value(data, LD_TEMP, i, + PC87365_REG_TEMP_STATUS, + data->temp_status[i]); + if ((data->temp_status[i] & 0x81) == 0x81) { + data->temp[i] = pc87360_read_value(data, + LD_TEMP, i, + PC87365_REG_TEMP); + } + if (data->temp_status[i] & 0x01) { + data->temp_min[i] = pc87360_read_value(data, + LD_TEMP, i, + PC87365_REG_TEMP_MIN); + data->temp_max[i] = pc87360_read_value(data, + LD_TEMP, i, + PC87365_REG_TEMP_MAX); + data->temp_crit[i] = pc87360_read_value(data, + LD_TEMP, i, + PC87365_REG_TEMP_CRIT); + } + } + if (data->tempnr) { + data->temp_alarms = pc87360_read_value(data, LD_TEMP, + NO_BANK, PC87365_REG_TEMP_ALARMS) + & 0x3F; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init pc87360_init(void) +{ + int i; + + if (pc87360_find(0x2e, &devid, extra_isa) + && pc87360_find(0x4e, &devid, extra_isa)) { + printk(KERN_WARNING "pc87360: PC8736x not detected, " + "module not inserted.\n"); + return -ENODEV; + } + + /* Arbitrarily pick one of the addresses */ + for (i = 0; i < 3; i++) { + if (extra_isa[i] != 0x0000) { + normal_isa[0] = extra_isa[i]; + break; + } + } + + if (normal_isa[0] == 0x0000) { + printk(KERN_WARNING "pc87360: No active logical device, " + "module not inserted.\n"); + return -ENODEV; + } + + return i2c_add_driver(&pc87360_driver); +} + +static void __exit pc87360_exit(void) +{ + i2c_del_driver(&pc87360_driver); +} + + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("PC8736x hardware monitor"); +MODULE_LICENSE("GPL"); + +module_init(pc87360_init); +module_exit(pc87360_exit); diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c new file mode 100644 index 000000000000..48b4e22eaffe --- /dev/null +++ b/drivers/i2c/chips/pcf8574.c @@ -0,0 +1,229 @@ +/* + pcf8574.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + Dan Eaton <dan.eaton@rocketlogix.com> + Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with + the help of Jean Delvare <khali@linux-fr.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* A few notes about the PCF8574: + +* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by + Philips Semiconductors. It is designed to provide a byte I2C + interface to up to 8 separate devices. + +* The PCF8574 appears as a very simple SMBus device which can be + read from or written to with SMBUS byte read/write accesses. + + --Dan + +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_2(pcf8574, pcf8574a); + +/* Initial values */ +#define PCF8574_INIT 255 /* All outputs on (input mode) */ + +/* Each client has this additional data */ +struct pcf8574_data { + struct i2c_client client; + + u8 read, write; /* Register values */ +}; + +static int pcf8574_attach_adapter(struct i2c_adapter *adapter); +static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind); +static int pcf8574_detach_client(struct i2c_client *client); +static void pcf8574_init_client(struct i2c_client *client); + +/* This is the driver that will be inserted */ +static struct i2c_driver pcf8574_driver = { + .owner = THIS_MODULE, + .name = "pcf8574", + .id = I2C_DRIVERID_PCF8574, + .flags = I2C_DF_NOTIFY, + .attach_adapter = pcf8574_attach_adapter, + .detach_client = pcf8574_detach_client, +}; + +/* following are the sysfs callback functions */ +static ssize_t show_read(struct device *dev, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pcf8574_data *data = i2c_get_clientdata(client); + data->read = i2c_smbus_read_byte(client); + return sprintf(buf, "%u\n", data->read); +} + +static DEVICE_ATTR(read, S_IRUGO, show_read, NULL); + +static ssize_t show_write(struct device *dev, char *buf) +{ + struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev)); + return sprintf(buf, "%u\n", data->write); +} + +static ssize_t set_write(struct device *dev, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pcf8574_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + if (val > 0xff) + return -EINVAL; + + data->write = val; + i2c_smbus_write_byte(client, data->write); + return count; +} + +static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write); + +/* + * Real code + */ + +static int pcf8574_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, pcf8574_detect); +} + +/* This function is called by i2c_detect */ +int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct pcf8574_data *data; + int err = 0; + const char *client_name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. */ + if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct pcf8574_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &pcf8574_driver; + new_client->flags = 0; + + /* Now, we would do the remaining detection. But the PCF8574 is plainly + impossible to detect! Stupid chip. */ + + /* Determine the chip type */ + if (kind <= 0) { + if (address >= 0x38 && address <= 0x3f) + kind = pcf8574a; + else + kind = pcf8574; + } + + if (kind == pcf8574a) + client_name = "pcf8574a"; + else + client_name = "pcf8574"; + + /* Fill in the remaining client fields and put it into the global list */ + strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the PCF8574 chip */ + pcf8574_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_read); + device_create_file(&new_client->dev, &dev_attr_write); + return 0; + +/* OK, this is not exactly good programming practice, usually. But it is + very code-efficient in this case. */ + + exit_free: + kfree(data); + exit: + return err; +} + +static int pcf8574_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +/* Called when we have found a new PCF8574. */ +static void pcf8574_init_client(struct i2c_client *client) +{ + struct pcf8574_data *data = i2c_get_clientdata(client); + data->write = PCF8574_INIT; + i2c_smbus_write_byte(client, data->write); +} + +static int __init pcf8574_init(void) +{ + return i2c_add_driver(&pcf8574_driver); +} + +static void __exit pcf8574_exit(void) +{ + i2c_del_driver(&pcf8574_driver); +} + + +MODULE_AUTHOR + ("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "Dan Eaton <dan.eaton@rocketlogix.com> " + "and Aurelien Jarno <aurelien@aurel32.net>"); +MODULE_DESCRIPTION("PCF8574 driver"); +MODULE_LICENSE("GPL"); + +module_init(pcf8574_init); +module_exit(pcf8574_exit); diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c new file mode 100644 index 000000000000..b6b927d8b372 --- /dev/null +++ b/drivers/i2c/chips/pcf8591.c @@ -0,0 +1,316 @@ +/* + pcf8591.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2001-2004 Aurelien Jarno <aurelien@aurel32.net> + Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with + the help of Jean Delvare <khali@linux-fr.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, + 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(pcf8591); + +static int input_mode; +module_param(input_mode, int, 0); +MODULE_PARM_DESC(input_mode, + "Analog input mode:\n" + " 0 = four single ended inputs\n" + " 1 = three differential inputs\n" + " 2 = single ended and differential mixed\n" + " 3 = two differential inputs\n"); + +/* The PCF8591 control byte + 7 6 5 4 3 2 1 0 + | 0 |AOEF| AIP | 0 |AINC| AICH | */ + +/* Analog Output Enable Flag (analog output active if 1) */ +#define PCF8591_CONTROL_AOEF 0x40 + +/* Analog Input Programming + 0x00 = four single ended inputs + 0x10 = three differential inputs + 0x20 = single ended and differential mixed + 0x30 = two differential inputs */ +#define PCF8591_CONTROL_AIP_MASK 0x30 + +/* Autoincrement Flag (switch on if 1) */ +#define PCF8591_CONTROL_AINC 0x04 + +/* Channel selection + 0x00 = channel 0 + 0x01 = channel 1 + 0x02 = channel 2 + 0x03 = channel 3 */ +#define PCF8591_CONTROL_AICH_MASK 0x03 + +/* Initial values */ +#define PCF8591_INIT_CONTROL ((input_mode << 4) | PCF8591_CONTROL_AOEF) +#define PCF8591_INIT_AOUT 0 /* DAC out = 0 */ + +/* Conversions */ +#define REG_TO_SIGNED(reg) (((reg) & 0x80)?((reg) - 256):(reg)) + +struct pcf8591_data { + struct i2c_client client; + struct semaphore update_lock; + + u8 control; + u8 aout; +}; + +static int pcf8591_attach_adapter(struct i2c_adapter *adapter); +static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind); +static int pcf8591_detach_client(struct i2c_client *client); +static void pcf8591_init_client(struct i2c_client *client); +static int pcf8591_read_channel(struct device *dev, int channel); + +/* This is the driver that will be inserted */ +static struct i2c_driver pcf8591_driver = { + .owner = THIS_MODULE, + .name = "pcf8591", + .id = I2C_DRIVERID_PCF8591, + .flags = I2C_DF_NOTIFY, + .attach_adapter = pcf8591_attach_adapter, + .detach_client = pcf8591_detach_client, +}; + +/* following are the sysfs callback functions */ +#define show_in_channel(channel) \ +static ssize_t show_in##channel##_input(struct device *dev, char *buf) \ +{ \ + return sprintf(buf, "%d\n", pcf8591_read_channel(dev, channel));\ +} \ +static DEVICE_ATTR(in##channel##_input, S_IRUGO, \ + show_in##channel##_input, NULL); + +show_in_channel(0); +show_in_channel(1); +show_in_channel(2); +show_in_channel(3); + +static ssize_t show_out0_ouput(struct device *dev, char *buf) +{ + struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev)); + return sprintf(buf, "%d\n", data->aout * 10); +} + +static ssize_t set_out0_output(struct device *dev, const char *buf, size_t count) +{ + unsigned int value; + struct i2c_client *client = to_i2c_client(dev); + struct pcf8591_data *data = i2c_get_clientdata(client); + if ((value = (simple_strtoul(buf, NULL, 10) + 5) / 10) <= 255) { + data->aout = value; + i2c_smbus_write_byte_data(client, data->control, data->aout); + return count; + } + return -EINVAL; +} + +static DEVICE_ATTR(out0_output, S_IWUSR | S_IRUGO, + show_out0_ouput, set_out0_output); + +static ssize_t show_out0_enable(struct device *dev, char *buf) +{ + struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev)); + return sprintf(buf, "%u\n", !(!(data->control & PCF8591_CONTROL_AOEF))); +} + +static ssize_t set_out0_enable(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pcf8591_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + if (val) + data->control |= PCF8591_CONTROL_AOEF; + else + data->control &= ~PCF8591_CONTROL_AOEF; + i2c_smbus_write_byte(client, data->control); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(out0_enable, S_IWUSR | S_IRUGO, + show_out0_enable, set_out0_enable); + +/* + * Real code + */ +static int pcf8591_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, pcf8591_detect); +} + +/* This function is called by i2c_detect */ +int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct pcf8591_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE + | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. */ + if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct pcf8591_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &pcf8591_driver; + new_client->flags = 0; + + /* Now, we would do the remaining detection. But the PCF8591 is plainly + impossible to detect! Stupid chip. */ + + /* Determine the chip type - only one kind supported! */ + if (kind <= 0) + kind = pcf8591; + + /* Fill in the remaining client fields and put it into the global + list */ + strlcpy(new_client->name, "pcf8591", I2C_NAME_SIZE); + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_kfree; + + /* Initialize the PCF8591 chip */ + pcf8591_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_out0_enable); + device_create_file(&new_client->dev, &dev_attr_out0_output); + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + + /* Register input2 if not in "two differential inputs" mode */ + if (input_mode != 3 ) + device_create_file(&new_client->dev, &dev_attr_in2_input); + + /* Register input3 only in "four single ended inputs" mode */ + if (input_mode == 0) + device_create_file(&new_client->dev, &dev_attr_in3_input); + + return 0; + + /* OK, this is not exactly good programming practice, usually. But it is + very code-efficient in this case. */ + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int pcf8591_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +/* Called when we have found a new PCF8591. */ +static void pcf8591_init_client(struct i2c_client *client) +{ + struct pcf8591_data *data = i2c_get_clientdata(client); + data->control = PCF8591_INIT_CONTROL; + data->aout = PCF8591_INIT_AOUT; + + i2c_smbus_write_byte_data(client, data->control, data->aout); + + /* The first byte transmitted contains the conversion code of the + previous read cycle. FLUSH IT! */ + i2c_smbus_read_byte(client); +} + +static int pcf8591_read_channel(struct device *dev, int channel) +{ + u8 value; + struct i2c_client *client = to_i2c_client(dev); + struct pcf8591_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if ((data->control & PCF8591_CONTROL_AICH_MASK) != channel) { + data->control = (data->control & ~PCF8591_CONTROL_AICH_MASK) + | channel; + i2c_smbus_write_byte(client, data->control); + + /* The first byte transmitted contains the conversion code of + the previous read cycle. FLUSH IT! */ + i2c_smbus_read_byte(client); + } + value = i2c_smbus_read_byte(client); + + up(&data->update_lock); + + if ((channel == 2 && input_mode == 2) || + (channel != 3 && (input_mode == 1 || input_mode == 3))) + return (10 * REG_TO_SIGNED(value)); + else + return (10 * value); +} + +static int __init pcf8591_init(void) +{ + if (input_mode < 0 || input_mode > 3) { + printk(KERN_WARNING "pcf8591: invalid input_mode (%d)\n", + input_mode); + input_mode = 0; + } + return i2c_add_driver(&pcf8591_driver); +} + +static void __exit pcf8591_exit(void) +{ + i2c_del_driver(&pcf8591_driver); +} + +MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>"); +MODULE_DESCRIPTION("PCF8591 driver"); +MODULE_LICENSE("GPL"); + +module_init(pcf8591_init); +module_exit(pcf8591_exit); diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c new file mode 100644 index 000000000000..5a9deddb626b --- /dev/null +++ b/drivers/i2c/chips/rtc8564.c @@ -0,0 +1,394 @@ +/* + * linux/drivers/i2c/chips/rtc8564.c + * + * Copyright (C) 2002-2004 Stefan Eletzhofer + * + * based on linux/drivers/acron/char/pcf8583.c + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for system3's EPSON RTC 8564 chip + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/rtc.h> /* get the user-level API */ +#include <linux/init.h> +#include <linux/init.h> + +#include "rtc8564.h" + +#ifdef DEBUG +# define _DBG(x, fmt, args...) do{ if (debug>=x) printk(KERN_DEBUG"%s: " fmt "\n", __FUNCTION__, ##args); } while(0); +#else +# define _DBG(x, fmt, args...) do { } while(0); +#endif + +#define _DBGRTCTM(x, rtctm) if (debug>=x) printk("%s: secs=%d, mins=%d, hours=%d, mday=%d, " \ + "mon=%d, year=%d, wday=%d VL=%d\n", __FUNCTION__, \ + (rtctm).secs, (rtctm).mins, (rtctm).hours, (rtctm).mday, \ + (rtctm).mon, (rtctm).year, (rtctm).wday, (rtctm).vl); + +struct rtc8564_data { + struct i2c_client client; + u16 ctrl; +}; + +static inline u8 _rtc8564_ctrl1(struct i2c_client *client) +{ + struct rtc8564_data *data = i2c_get_clientdata(client); + return data->ctrl & 0xff; +} +static inline u8 _rtc8564_ctrl2(struct i2c_client *client) +{ + struct rtc8564_data *data = i2c_get_clientdata(client); + return (data->ctrl & 0xff00) >> 8; +} + +#define CTRL1(c) _rtc8564_ctrl1(c) +#define CTRL2(c) _rtc8564_ctrl2(c) + +#define BCD_TO_BIN(val) (((val)&15) + ((val)>>4)*10) +#define BIN_TO_BCD(val) ((((val)/10)<<4) + (val)%10) + +static int debug;; +module_param(debug, int, S_IRUGO | S_IWUSR); + +static struct i2c_driver rtc8564_driver; + +static unsigned short ignore[] = { I2C_CLIENT_END }; +static unsigned short normal_addr[] = { 0x51, I2C_CLIENT_END }; + +static struct i2c_client_address_data addr_data = { + .normal_i2c = normal_addr, + .normal_i2c_range = ignore, + .probe = ignore, + .probe_range = ignore, + .ignore = ignore, + .ignore_range = ignore, + .force = ignore, +}; + +static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem); +static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem); + +static int rtc8564_read(struct i2c_client *client, unsigned char adr, + unsigned char *buf, unsigned char len) +{ + int ret = -EIO; + unsigned char addr[1] = { adr }; + struct i2c_msg msgs[2] = { + {client->addr, 0, 1, addr}, + {client->addr, I2C_M_RD, len, buf} + }; + + _DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, buf, len); + + if (!buf) { + ret = -EINVAL; + goto done; + } + + ret = i2c_transfer(client->adapter, msgs, 2); + if (ret == 2) { + ret = 0; + } + +done: + return ret; +} + +static int rtc8564_write(struct i2c_client *client, unsigned char adr, + unsigned char *data, unsigned char len) +{ + int ret = 0; + unsigned char _data[16]; + struct i2c_msg wr; + int i; + + if (!data || len > 15) { + ret = -EINVAL; + goto done; + } + + _DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, data, len); + + _data[0] = adr; + for (i = 0; i < len; i++) { + _data[i + 1] = data[i]; + _DBG(5, "data[%d] = 0x%02x (%d)", i, data[i], data[i]); + } + + wr.addr = client->addr; + wr.flags = 0; + wr.len = len + 1; + wr.buf = _data; + + ret = i2c_transfer(client->adapter, &wr, 1); + if (ret == 1) { + ret = 0; + } + +done: + return ret; +} + +static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind) +{ + int ret; + struct i2c_client *new_client; + struct rtc8564_data *d; + unsigned char data[10]; + unsigned char ad[1] = { 0 }; + struct i2c_msg ctrl_wr[1] = { + {addr, 0, 2, data} + }; + struct i2c_msg ctrl_rd[2] = { + {addr, 0, 1, ad}, + {addr, I2C_M_RD, 2, data} + }; + + d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto done; + } + memset(d, 0, sizeof(struct rtc8564_data)); + new_client = &d->client; + + strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE); + i2c_set_clientdata(new_client, d); + new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY; + new_client->addr = addr; + new_client->adapter = adap; + new_client->driver = &rtc8564_driver; + + _DBG(1, "client=%p", new_client); + + /* init ctrl1 reg */ + data[0] = 0; + data[1] = 0; + ret = i2c_transfer(new_client->adapter, ctrl_wr, 1); + if (ret != 1) { + printk(KERN_INFO "rtc8564: cant init ctrl1\n"); + ret = -ENODEV; + goto done; + } + + /* read back ctrl1 and ctrl2 */ + ret = i2c_transfer(new_client->adapter, ctrl_rd, 2); + if (ret != 2) { + printk(KERN_INFO "rtc8564: cant read ctrl\n"); + ret = -ENODEV; + goto done; + } + + d->ctrl = data[0] | (data[1] << 8); + + _DBG(1, "RTC8564_REG_CTRL1=%02x, RTC8564_REG_CTRL2=%02x", + data[0], data[1]); + + ret = i2c_attach_client(new_client); +done: + if (ret) { + kfree(d); + } + return ret; +} + +static int rtc8564_probe(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, rtc8564_attach); +} + +static int rtc8564_detach(struct i2c_client *client) +{ + i2c_detach_client(client); + kfree(i2c_get_clientdata(client)); + return 0; +} + +static int rtc8564_get_datetime(struct i2c_client *client, struct rtc_tm *dt) +{ + int ret = -EIO; + unsigned char buf[15]; + + _DBG(1, "client=%p, dt=%p", client, dt); + + if (!dt) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + + ret = rtc8564_read(client, 0, buf, 15); + if (ret) + return ret; + + /* century stored in minute alarm reg */ + dt->year = BCD_TO_BIN(buf[RTC8564_REG_YEAR]); + dt->year += 100 * BCD_TO_BIN(buf[RTC8564_REG_AL_MIN] & 0x3f); + dt->mday = BCD_TO_BIN(buf[RTC8564_REG_DAY] & 0x3f); + dt->wday = BCD_TO_BIN(buf[RTC8564_REG_WDAY] & 7); + dt->mon = BCD_TO_BIN(buf[RTC8564_REG_MON_CENT] & 0x1f); + + dt->secs = BCD_TO_BIN(buf[RTC8564_REG_SEC] & 0x7f); + dt->vl = (buf[RTC8564_REG_SEC] & 0x80) == 0x80; + dt->mins = BCD_TO_BIN(buf[RTC8564_REG_MIN] & 0x7f); + dt->hours = BCD_TO_BIN(buf[RTC8564_REG_HR] & 0x3f); + + _DBGRTCTM(2, *dt); + + return 0; +} + +static int +rtc8564_set_datetime(struct i2c_client *client, struct rtc_tm *dt, int datetoo) +{ + int ret, len = 5; + unsigned char buf[15]; + + _DBG(1, "client=%p, dt=%p", client, dt); + + if (!dt) + return -EINVAL; + + _DBGRTCTM(2, *dt); + + buf[RTC8564_REG_CTRL1] = CTRL1(client) | RTC8564_CTRL1_STOP; + buf[RTC8564_REG_CTRL2] = CTRL2(client); + buf[RTC8564_REG_SEC] = BIN_TO_BCD(dt->secs); + buf[RTC8564_REG_MIN] = BIN_TO_BCD(dt->mins); + buf[RTC8564_REG_HR] = BIN_TO_BCD(dt->hours); + + if (datetoo) { + len += 5; + buf[RTC8564_REG_DAY] = BIN_TO_BCD(dt->mday); + buf[RTC8564_REG_WDAY] = BIN_TO_BCD(dt->wday); + buf[RTC8564_REG_MON_CENT] = BIN_TO_BCD(dt->mon) & 0x1f; + /* century stored in minute alarm reg */ + buf[RTC8564_REG_YEAR] = BIN_TO_BCD(dt->year % 100); + buf[RTC8564_REG_AL_MIN] = BIN_TO_BCD(dt->year / 100); + } + + ret = rtc8564_write(client, 0, buf, len); + if (ret) { + _DBG(1, "error writing data! %d", ret); + } + + buf[RTC8564_REG_CTRL1] = CTRL1(client); + ret = rtc8564_write(client, 0, buf, 1); + if (ret) { + _DBG(1, "error writing data! %d", ret); + } + + return ret; +} + +static int rtc8564_get_ctrl(struct i2c_client *client, unsigned int *ctrl) +{ + struct rtc8564_data *data = i2c_get_clientdata(client); + + if (!ctrl) + return -1; + + *ctrl = data->ctrl; + return 0; +} + +static int rtc8564_set_ctrl(struct i2c_client *client, unsigned int *ctrl) +{ + struct rtc8564_data *data = i2c_get_clientdata(client); + unsigned char buf[2]; + + if (!ctrl) + return -1; + + buf[0] = *ctrl & 0xff; + buf[1] = (*ctrl & 0xff00) >> 8; + data->ctrl = *ctrl; + + return rtc8564_write(client, 0, buf, 2); +} + +static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem) +{ + + if (!mem) + return -EINVAL; + + return rtc8564_read(client, mem->loc, mem->data, mem->nr); +} + +static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem) +{ + + if (!mem) + return -EINVAL; + + return rtc8564_write(client, mem->loc, mem->data, mem->nr); +} + +static int +rtc8564_command(struct i2c_client *client, unsigned int cmd, void *arg) +{ + + _DBG(1, "cmd=%d", cmd); + + switch (cmd) { + case RTC_GETDATETIME: + return rtc8564_get_datetime(client, arg); + + case RTC_SETTIME: + return rtc8564_set_datetime(client, arg, 0); + + case RTC_SETDATETIME: + return rtc8564_set_datetime(client, arg, 1); + + case RTC_GETCTRL: + return rtc8564_get_ctrl(client, arg); + + case RTC_SETCTRL: + return rtc8564_set_ctrl(client, arg); + + case MEM_READ: + return rtc8564_read_mem(client, arg); + + case MEM_WRITE: + return rtc8564_write_mem(client, arg); + + default: + return -EINVAL; + } +} + +static struct i2c_driver rtc8564_driver = { + .owner = THIS_MODULE, + .name = "RTC8564", + .id = I2C_DRIVERID_RTC8564, + .flags = I2C_DF_NOTIFY, + .attach_adapter = rtc8564_probe, + .detach_client = rtc8564_detach, + .command = rtc8564_command +}; + +static __init int rtc8564_init(void) +{ + return i2c_add_driver(&rtc8564_driver); +} + +static __exit void rtc8564_exit(void) +{ + i2c_del_driver(&rtc8564_driver); +} + +MODULE_AUTHOR("Stefan Eletzhofer <Stefan.Eletzhofer@eletztrick.de>"); +MODULE_DESCRIPTION("EPSON RTC8564 Driver"); +MODULE_LICENSE("GPL"); + +module_init(rtc8564_init); +module_exit(rtc8564_exit); diff --git a/drivers/i2c/chips/rtc8564.h b/drivers/i2c/chips/rtc8564.h new file mode 100644 index 000000000000..e5342d10b8fa --- /dev/null +++ b/drivers/i2c/chips/rtc8564.h @@ -0,0 +1,78 @@ +/* + * linux/drivers/i2c/chips/rtc8564.h + * + * Copyright (C) 2002-2004 Stefan Eletzhofer + * + * based on linux/drivers/acron/char/pcf8583.h + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +struct rtc_tm { + unsigned char secs; + unsigned char mins; + unsigned char hours; + unsigned char mday; + unsigned char mon; + unsigned short year; /* xxxx 4 digits :) */ + unsigned char wday; + unsigned char vl; +}; + +struct mem { + unsigned int loc; + unsigned int nr; + unsigned char *data; +}; + +#define RTC_GETDATETIME 0 +#define RTC_SETTIME 1 +#define RTC_SETDATETIME 2 +#define RTC_GETCTRL 3 +#define RTC_SETCTRL 4 +#define MEM_READ 5 +#define MEM_WRITE 6 + +#define RTC8564_REG_CTRL1 0x0 /* T 0 S 0 | T 0 0 0 */ +#define RTC8564_REG_CTRL2 0x1 /* 0 0 0 TI/TP | AF TF AIE TIE */ +#define RTC8564_REG_SEC 0x2 /* VL 4 2 1 | 8 4 2 1 */ +#define RTC8564_REG_MIN 0x3 /* x 4 2 1 | 8 4 2 1 */ +#define RTC8564_REG_HR 0x4 /* x x 2 1 | 8 4 2 1 */ +#define RTC8564_REG_DAY 0x5 /* x x 2 1 | 8 4 2 1 */ +#define RTC8564_REG_WDAY 0x6 /* x x x x | x 4 2 1 */ +#define RTC8564_REG_MON_CENT 0x7 /* C x x 1 | 8 4 2 1 */ +#define RTC8564_REG_YEAR 0x8 /* 8 4 2 1 | 8 4 2 1 */ +#define RTC8564_REG_AL_MIN 0x9 /* AE 4 2 1 | 8 4 2 1 */ +#define RTC8564_REG_AL_HR 0xa /* AE 4 2 1 | 8 4 2 1 */ +#define RTC8564_REG_AL_DAY 0xb /* AE x 2 1 | 8 4 2 1 */ +#define RTC8564_REG_AL_WDAY 0xc /* AE x x x | x 4 2 1 */ +#define RTC8564_REG_CLKOUT 0xd /* FE x x x | x x FD1 FD0 */ +#define RTC8564_REG_TCTL 0xe /* TE x x x | x x FD1 FD0 */ +#define RTC8564_REG_TIMER 0xf /* 8 bit binary */ + +/* Control reg */ +#define RTC8564_CTRL1_TEST1 (1<<3) +#define RTC8564_CTRL1_STOP (1<<5) +#define RTC8564_CTRL1_TEST2 (1<<7) + +#define RTC8564_CTRL2_TIE (1<<0) +#define RTC8564_CTRL2_AIE (1<<1) +#define RTC8564_CTRL2_TF (1<<2) +#define RTC8564_CTRL2_AF (1<<3) +#define RTC8564_CTRL2_TI_TP (1<<4) + +/* CLKOUT frequencies */ +#define RTC8564_FD_32768HZ (0x0) +#define RTC8564_FD_1024HZ (0x1) +#define RTC8564_FD_32 (0x2) +#define RTC8564_FD_1HZ (0x3) + +/* Timer CTRL */ +#define RTC8564_TD_4096HZ (0x0) +#define RTC8564_TD_64HZ (0x1) +#define RTC8564_TD_1HZ (0x2) +#define RTC8564_TD_1_60HZ (0x3) + +#define I2C_DRIVERID_RTC8564 0xf000 diff --git a/drivers/i2c/chips/sis5595.c b/drivers/i2c/chips/sis5595.c new file mode 100644 index 000000000000..7ea84532df32 --- /dev/null +++ b/drivers/i2c/chips/sis5595.c @@ -0,0 +1,816 @@ +/* + sis5595.c - Part of lm_sensors, Linux kernel modules + for hardware monitoring + + Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>, + Kyösti Mälkki <kmalkki@cc.hut.fi>, and + Mark D. Studebaker <mdsxyz123@yahoo.com> + Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with + the help of Jean Delvare <khali@linux-fr.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + SiS southbridge has a LM78-like chip integrated on the same IC. + This driver is a customized copy of lm78.c + + Supports following revisions: + Version PCI ID PCI Revision + 1 1039/0008 AF or less + 2 1039/0008 B0 or greater + + Note: these chips contain a 0008 device which is incompatible with the + 5595. We recognize these by the presence of the listed + "blacklist" PCI ID and refuse to load. + + NOT SUPPORTED PCI ID BLACKLIST PCI ID + 540 0008 0540 + 550 0008 0550 + 5513 0008 5511 + 5581 0008 5597 + 5582 0008 5597 + 5597 0008 5597 + 5598 0008 5597/5598 + 630 0008 0630 + 645 0008 0645 + 730 0008 0730 + 735 0008 0735 +*/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/init.h> +#include <asm/io.h> + + +/* If force_addr is set to anything different from 0, we forcibly enable + the device at the given address. */ +static u16 force_addr; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, + "Initialize the base address of the sensors"); + +/* Addresses to scan. + Note that we can't determine the ISA address until we have initialized + our module */ +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(sis5595); + +/* Many SIS5595 constants specified below */ + +/* Length of ISA address segment */ +#define SIS5595_EXTENT 8 +/* PCI Config Registers */ +#define SIS5595_REVISION_REG 0x08 +#define SIS5595_BASE_REG 0x68 +#define SIS5595_PIN_REG 0x7A +#define SIS5595_ENABLE_REG 0x7B + +/* Where are the ISA address/data registers relative to the base address */ +#define SIS5595_ADDR_REG_OFFSET 5 +#define SIS5595_DATA_REG_OFFSET 6 + +/* The SIS5595 registers */ +#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2) +#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2) +#define SIS5595_REG_IN(nr) (0x20 + (nr)) + +#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr)) +#define SIS5595_REG_FAN(nr) (0x28 + (nr)) + +/* On the first version of the chip, the temp registers are separate. + On the second version, + TEMP pin is shared with IN4, configured in PCI register 0x7A. + The registers are the same as well. + OVER and HYST are really MAX and MIN. */ + +#define REV2MIN 0xb0 +#define SIS5595_REG_TEMP (( data->revision) >= REV2MIN) ? \ + SIS5595_REG_IN(4) : 0x27 +#define SIS5595_REG_TEMP_OVER (( data->revision) >= REV2MIN) ? \ + SIS5595_REG_IN_MAX(4) : 0x39 +#define SIS5595_REG_TEMP_HYST (( data->revision) >= REV2MIN) ? \ + SIS5595_REG_IN_MIN(4) : 0x3a + +#define SIS5595_REG_CONFIG 0x40 +#define SIS5595_REG_ALARM1 0x41 +#define SIS5595_REG_ALARM2 0x42 +#define SIS5595_REG_FANDIV 0x47 + +/* Conversions. Limit checking is only done on the TO_REG + variants. */ + +/* IN: mV, (0V to 4.08V) + REG: 16mV/bit */ +static inline u8 IN_TO_REG(unsigned long val) +{ + unsigned long nval = SENSORS_LIMIT(val, 0, 4080); + return (nval + 8) / 16; +} +#define IN_FROM_REG(val) ((val) * 16) + +static inline u8 FAN_TO_REG(long rpm, int div) +{ + if (rpm <= 0) + return 255; + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +static inline int FAN_FROM_REG(u8 val, int div) +{ + return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); +} + +/* TEMP: mC (-54.12C to +157.53C) + REG: 0.83C/bit + 52.12, two's complement */ +static inline int TEMP_FROM_REG(s8 val) +{ + return val * 830 + 52120; +} +static inline s8 TEMP_TO_REG(int val) +{ + int nval = SENSORS_LIMIT(val, -54120, 157530) ; + return nval<0 ? (nval-5212-415)/830 : (nval-5212+415)/830; +} + +/* FAN DIV: 1, 2, 4, or 8 (defaults to 2) + REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */ +static inline u8 DIV_TO_REG(int val) +{ + return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1; +} +#define DIV_FROM_REG(val) (1 << (val)) + +/* For the SIS5595, we need to keep some data in memory. That + data is pointed to by sis5595_list[NR]->data. The structure itself is + dynamically allocated, at the time when the new sis5595 client is + allocated. */ +struct sis5595_data { + struct i2c_client client; + struct semaphore lock; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + char maxins; /* == 3 if temp enabled, otherwise == 4 */ + u8 revision; /* Reg. value */ + + u8 in[5]; /* Register value */ + u8 in_max[5]; /* Register value */ + u8 in_min[5]; /* Register value */ + u8 fan[2]; /* Register value */ + u8 fan_min[2]; /* Register value */ + s8 temp; /* Register value */ + s8 temp_over; /* Register value */ + s8 temp_hyst; /* Register value */ + u8 fan_div[2]; /* Register encoding, shifted right */ + u16 alarms; /* Register encoding, combined */ +}; + +static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */ + +static int sis5595_attach_adapter(struct i2c_adapter *adapter); +static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind); +static int sis5595_detach_client(struct i2c_client *client); + +static int sis5595_read_value(struct i2c_client *client, u8 register); +static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value); +static struct sis5595_data *sis5595_update_device(struct device *dev); +static void sis5595_init_client(struct i2c_client *client); + +static struct i2c_driver sis5595_driver = { + .owner = THIS_MODULE, + .name = "sis5595", + .id = I2C_DRIVERID_SIS5595, + .flags = I2C_DF_NOTIFY, + .attach_adapter = sis5595_attach_adapter, + .detach_client = sis5595_detach_client, +}; + +/* 4 Voltages */ +static ssize_t show_in(struct device *dev, char *buf, int nr) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); +} + +static ssize_t show_in_min(struct device *dev, char *buf, int nr) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); +} + +static ssize_t show_in_max(struct device *dev, char *buf, int nr) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); +} + +static ssize_t set_in_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sis5595_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val); + sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]); + up(&data->update_lock); + return count; +} + +static ssize_t set_in_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sis5595_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val); + sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]); + up(&data->update_lock); + return count; +} + +#define show_in_offset(offset) \ +static ssize_t \ + show_in##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in##offset, NULL); \ +static ssize_t \ + show_in##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t \ + show_in##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t set_in##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t set_in##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); + +show_in_offset(0); +show_in_offset(1); +show_in_offset(2); +show_in_offset(3); +show_in_offset(4); + +/* Temperature */ +static ssize_t show_temp(struct device *dev, char *buf) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); +} + +static ssize_t show_temp_over(struct device *dev, char *buf) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); +} + +static ssize_t set_temp_over(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sis5595_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_over = TEMP_TO_REG(val); + sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over); + up(&data->update_lock); + return count; +} + +static ssize_t show_temp_hyst(struct device *dev, char *buf) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); +} + +static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sis5595_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_hyst = TEMP_TO_REG(val); + sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, + show_temp_over, set_temp_over); +static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, + show_temp_hyst, set_temp_hyst); + +/* 2 Fans */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], + DIV_FROM_REG(data->fan_div[nr])) ); +} + +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])) ); +} + +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sis5595_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + return count; +} + +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) ); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least suprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sis5595_data *data = i2c_get_clientdata(client); + unsigned long min; + unsigned long val = simple_strtoul(buf, NULL, 10); + int reg; + + down(&data->update_lock); + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + reg = sis5595_read_value(client, SIS5595_REG_FANDIV); + + switch (val) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + dev_err(&client->dev, "fan_div value %ld not " + "supported. Choose one of 1, 2, 4 or 8!\n", val); + up(&data->update_lock); + return -EINVAL; + } + + switch (nr) { + case 0: + reg = (reg & 0xcf) | (data->fan_div[nr] << 4); + break; + case 1: + reg = (reg & 0x3f) | (data->fan_div[nr] << 6); + break; + } + sis5595_write_value(client, SIS5595_REG_FANDIV, reg); + data->fan_min[nr] = + FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); + return count; +} + +#define show_fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); + +show_fan_offset(1); +show_fan_offset(2); + +static ssize_t set_fan_1_div(struct device *dev, const char *buf, + size_t count) +{ + return set_fan_div(dev, buf, count, 0) ; +} + +static ssize_t set_fan_2_div(struct device *dev, const char *buf, + size_t count) +{ + return set_fan_div(dev, buf, count, 1) ; +} +static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, + show_fan_1_div, set_fan_1_div); +static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, + show_fan_2_div, set_fan_2_div); + +/* Alarms */ +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct sis5595_data *data = sis5595_update_device(dev); + return sprintf(buf, "%d\n", data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* This is called when the module is loaded */ +static int sis5595_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, sis5595_detect); +} + +int sis5595_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int err = 0; + int i; + struct i2c_client *new_client; + struct sis5595_data *data; + char val; + u16 a; + + /* Make sure we are probing the ISA bus!! */ + if (!i2c_is_isa_adapter(adapter)) + goto exit; + + if (force_addr) + address = force_addr & ~(SIS5595_EXTENT - 1); + /* Reserve the ISA region */ + if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) { + err = -EBUSY; + goto exit; + } + if (force_addr) { + dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address); + if (PCIBIOS_SUCCESSFUL != + pci_write_config_word(s_bridge, SIS5595_BASE_REG, address)) + goto exit_release; + if (PCIBIOS_SUCCESSFUL != + pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a)) + goto exit_release; + if ((a & ~(SIS5595_EXTENT - 1)) != address) + /* doesn't work for some chips? */ + goto exit_release; + } + + if (PCIBIOS_SUCCESSFUL != + pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) { + goto exit_release; + } + if ((val & 0x80) == 0) { + if (PCIBIOS_SUCCESSFUL != + pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG, + val | 0x80)) + goto exit_release; + if (PCIBIOS_SUCCESSFUL != + pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) + goto exit_release; + if ((val & 0x80) == 0) + /* doesn't work for some chips! */ + goto exit_release; + } + + if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit_release; + } + memset(data, 0, sizeof(struct sis5595_data)); + + new_client = &data->client; + new_client->addr = address; + init_MUTEX(&data->lock); + i2c_set_clientdata(new_client, data); + new_client->adapter = adapter; + new_client->driver = &sis5595_driver; + new_client->flags = 0; + + /* Check revision and pin registers to determine whether 4 or 5 voltages */ + pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision)); + /* 4 voltages, 1 temp */ + data->maxins = 3; + if (data->revision >= REV2MIN) { + pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val); + if (!(val & 0x80)) + /* 5 voltages, no temps */ + data->maxins = 4; + } + + /* Fill in the remaining client fields and put it into the global list */ + strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE); + + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the SIS5595 chip */ + sis5595_init_client(new_client); + + /* A few vars need to be filled upon startup */ + for (i = 0; i < 2; i++) { + data->fan_min[i] = sis5595_read_value(new_client, + SIS5595_REG_FAN_MIN(i)); + } + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in3_max); + if (data->maxins == 4) { + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in4_max); + } + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_alarms); + if (data->maxins == 3) { + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + } + return 0; + +exit_free: + kfree(data); +exit_release: + release_region(address, SIS5595_EXTENT); +exit: + return err; +} + +static int sis5595_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + if (i2c_is_isa_client(client)) + release_region(client->addr, SIS5595_EXTENT); + + kfree(i2c_get_clientdata(client)); + + return 0; +} + + +/* ISA access must be locked explicitly. */ +static int sis5595_read_value(struct i2c_client *client, u8 reg) +{ + int res; + + struct sis5595_data *data = i2c_get_clientdata(client); + down(&data->lock); + outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); + res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET); + up(&data->lock); + return res; +} + +static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + struct sis5595_data *data = i2c_get_clientdata(client); + down(&data->lock); + outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); + outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET); + up(&data->lock); + return 0; +} + +/* Called when we have found a new SIS5595. */ +static void sis5595_init_client(struct i2c_client *client) +{ + u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG); + if (!(config & 0x01)) + sis5595_write_value(client, SIS5595_REG_CONFIG, + (config & 0xf7) | 0x01); +} + +static struct sis5595_data *sis5595_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sis5595_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + + for (i = 0; i <= data->maxins; i++) { + data->in[i] = + sis5595_read_value(client, SIS5595_REG_IN(i)); + data->in_min[i] = + sis5595_read_value(client, + SIS5595_REG_IN_MIN(i)); + data->in_max[i] = + sis5595_read_value(client, + SIS5595_REG_IN_MAX(i)); + } + for (i = 0; i < 2; i++) { + data->fan[i] = + sis5595_read_value(client, SIS5595_REG_FAN(i)); + data->fan_min[i] = + sis5595_read_value(client, + SIS5595_REG_FAN_MIN(i)); + } + if (data->maxins == 3) { + data->temp = + sis5595_read_value(client, SIS5595_REG_TEMP); + data->temp_over = + sis5595_read_value(client, SIS5595_REG_TEMP_OVER); + data->temp_hyst = + sis5595_read_value(client, SIS5595_REG_TEMP_HYST); + } + i = sis5595_read_value(client, SIS5595_REG_FANDIV); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = i >> 6; + data->alarms = + sis5595_read_value(client, SIS5595_REG_ALARM1) | + (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8); + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static struct pci_device_id sis5595_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, sis5595_pci_ids); + +static int blacklist[] __devinitdata = { + PCI_DEVICE_ID_SI_540, + PCI_DEVICE_ID_SI_550, + PCI_DEVICE_ID_SI_630, + PCI_DEVICE_ID_SI_645, + PCI_DEVICE_ID_SI_730, + PCI_DEVICE_ID_SI_735, + PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but + that ID shows up in other chips so we + use the 5511 ID for recognition */ + PCI_DEVICE_ID_SI_5597, + PCI_DEVICE_ID_SI_5598, + 0 }; + +static int __devinit sis5595_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + u16 val; + int *i; + int addr = 0; + + for (i = blacklist; *i != 0; i++) { + struct pci_dev *dev; + dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL); + if (dev) { + dev_err(&dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i); + pci_dev_put(dev); + return -ENODEV; + } + } + + if (PCIBIOS_SUCCESSFUL != + pci_read_config_word(dev, SIS5595_BASE_REG, &val)) + return -ENODEV; + + addr = val & ~(SIS5595_EXTENT - 1); + if (addr == 0 && force_addr == 0) { + dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n"); + return -ENODEV; + } + if (force_addr) + addr = force_addr; /* so detect will get called */ + + if (!addr) { + dev_err(&dev->dev,"No SiS 5595 sensors found.\n"); + return -ENODEV; + } + normal_isa[0] = addr; + + s_bridge = pci_dev_get(dev); + if (i2c_add_driver(&sis5595_driver)) { + pci_dev_put(s_bridge); + s_bridge = NULL; + } + + /* Always return failure here. This is to allow other drivers to bind + * to this pci device. We don't really want to have control over the + * pci device, we only wanted to read as few register values from it. + */ + return -ENODEV; +} + +static struct pci_driver sis5595_pci_driver = { + .name = "sis5595", + .id_table = sis5595_pci_ids, + .probe = sis5595_pci_probe, +}; + +static int __init sm_sis5595_init(void) +{ + return pci_register_driver(&sis5595_pci_driver); +} + +static void __exit sm_sis5595_exit(void) +{ + pci_unregister_driver(&sis5595_pci_driver); + if (s_bridge != NULL) { + i2c_del_driver(&sis5595_driver); + pci_dev_put(s_bridge); + s_bridge = NULL; + } +} + +MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>"); +MODULE_DESCRIPTION("SiS 5595 Sensor device"); +MODULE_LICENSE("GPL"); + +module_init(sm_sis5595_init); +module_exit(sm_sis5595_exit); diff --git a/drivers/i2c/chips/smsc47b397.c b/drivers/i2c/chips/smsc47b397.c new file mode 100644 index 000000000000..1119c76791d9 --- /dev/null +++ b/drivers/i2c/chips/smsc47b397.c @@ -0,0 +1,352 @@ +/* + smsc47b397.c - Part of lm_sensors, Linux kernel modules + for hardware monitoring + + Supports the SMSC LPC47B397-NC Super-I/O chip. + + Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com> + Copyright (C) 2004 Utilitek Systems, Inc. + + derived in part from smsc47m1.c: + Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> + Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/init.h> +#include <asm/io.h> + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +/* Address is autodetected, there is no default value */ +static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; +static struct i2c_force_data forces[] = {{NULL}}; + +enum chips { any_chip, smsc47b397 }; +static struct i2c_address_data addr_data = { + .normal_i2c = normal_i2c, + .normal_isa = normal_isa, + .probe = normal_i2c, /* cheat */ + .ignore = normal_i2c, /* cheat */ + .forces = forces, +}; + +/* Super-I/0 registers and commands */ + +#define REG 0x2e /* The register to read/write */ +#define VAL 0x2f /* The value to read/write */ + +static inline void superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +/* select superio logical device */ +static inline void superio_select(int ld) +{ + superio_outb(0x07, ld); +} + +static inline void superio_enter(void) +{ + outb(0x55, REG); +} + +static inline void superio_exit(void) +{ + outb(0xAA, REG); +} + +#define SUPERIO_REG_DEVID 0x20 +#define SUPERIO_REG_DEVREV 0x21 +#define SUPERIO_REG_BASE_MSB 0x60 +#define SUPERIO_REG_BASE_LSB 0x61 +#define SUPERIO_REG_LD8 0x08 + +#define SMSC_EXTENT 0x02 + +/* 0 <= nr <= 3 */ +static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80}; +#define SMSC47B397_REG_TEMP(nr) (smsc47b397_reg_temp[(nr)]) + +/* 0 <= nr <= 3 */ +#define SMSC47B397_REG_FAN_LSB(nr) (0x28 + 2 * (nr)) +#define SMSC47B397_REG_FAN_MSB(nr) (0x29 + 2 * (nr)) + +struct smsc47b397_data { + struct i2c_client client; + struct semaphore lock; + + struct semaphore update_lock; + unsigned long last_updated; /* in jiffies */ + int valid; + + /* register values */ + u16 fan[4]; + u8 temp[4]; +}; + +static int smsc47b397_read_value(struct i2c_client *client, u8 reg) +{ + struct smsc47b397_data *data = i2c_get_clientdata(client); + int res; + + down(&data->lock); + outb(reg, client->addr); + res = inb_p(client->addr + 1); + up(&data->lock); + return res; +} + +static struct smsc47b397_data *smsc47b397_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47b397_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + dev_dbg(&client->dev, "starting device update...\n"); + + /* 4 temperature inputs, 4 fan inputs */ + for (i = 0; i < 4; i++) { + data->temp[i] = smsc47b397_read_value(client, + SMSC47B397_REG_TEMP(i)); + + /* must read LSB first */ + data->fan[i] = smsc47b397_read_value(client, + SMSC47B397_REG_FAN_LSB(i)); + data->fan[i] |= smsc47b397_read_value(client, + SMSC47B397_REG_FAN_MSB(i)) << 8; + } + + data->last_updated = jiffies; + data->valid = 1; + + dev_dbg(&client->dev, "... device update complete\n"); + } + + up(&data->update_lock); + + return data; +} + +/* TEMP: 0.001C/bit (-128C to +127C) + REG: 1C/bit, two's complement */ +static int temp_from_reg(u8 reg) +{ + return (s8)reg * 1000; +} + +/* 0 <= nr <= 3 */ +static ssize_t show_temp(struct device *dev, char *buf, int nr) +{ + struct smsc47b397_data *data = smsc47b397_update_device(dev); + return sprintf(buf, "%d\n", temp_from_reg(data->temp[nr])); +} + +#define sysfs_temp(num) \ +static ssize_t show_temp##num(struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, num-1); \ +} \ +static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL) + +sysfs_temp(1); +sysfs_temp(2); +sysfs_temp(3); +sysfs_temp(4); + +#define device_create_file_temp(client, num) \ + device_create_file(&client->dev, &dev_attr_temp##num##_input) + +/* FAN: 1 RPM/bit + REG: count of 90kHz pulses / revolution */ +static int fan_from_reg(u16 reg) +{ + return 90000 * 60 / reg; +} + +/* 0 <= nr <= 3 */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct smsc47b397_data *data = smsc47b397_update_device(dev); + return sprintf(buf, "%d\n", fan_from_reg(data->fan[nr])); +} + +#define sysfs_fan(num) \ +static ssize_t show_fan##num(struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, num-1); \ +} \ +static DEVICE_ATTR(fan##num##_input, S_IRUGO, show_fan##num, NULL) + +sysfs_fan(1); +sysfs_fan(2); +sysfs_fan(3); +sysfs_fan(4); + +#define device_create_file_fan(client, num) \ + device_create_file(&client->dev, &dev_attr_fan##num##_input) + +static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind); + +static int smsc47b397_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, smsc47b397_detect); +} + +static int smsc47b397_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + release_region(client->addr, SMSC_EXTENT); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static struct i2c_driver smsc47b397_driver = { + .owner = THIS_MODULE, + .name = "smsc47b397", + .id = I2C_DRIVERID_SMSC47B397, + .flags = I2C_DF_NOTIFY, + .attach_adapter = smsc47b397_attach_adapter, + .detach_client = smsc47b397_detach_client, +}; + +static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) +{ + struct i2c_client *new_client; + struct smsc47b397_data *data; + int err = 0; + + if (!i2c_is_isa_adapter(adapter)) { + return 0; + } + + if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) { + dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr); + return -EBUSY; + } + + if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) { + err = -ENOMEM; + goto error_release; + } + memset(data, 0x00, sizeof(struct smsc47b397_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = addr; + init_MUTEX(&data->lock); + new_client->adapter = adapter; + new_client->driver = &smsc47b397_driver; + new_client->flags = 0; + + strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE); + + init_MUTEX(&data->update_lock); + + if ((err = i2c_attach_client(new_client))) + goto error_free; + + device_create_file_temp(new_client, 1); + device_create_file_temp(new_client, 2); + device_create_file_temp(new_client, 3); + device_create_file_temp(new_client, 4); + + device_create_file_fan(new_client, 1); + device_create_file_fan(new_client, 2); + device_create_file_fan(new_client, 3); + device_create_file_fan(new_client, 4); + + return 0; + +error_free: + kfree(new_client); +error_release: + release_region(addr, SMSC_EXTENT); + return err; +} + +static int __init smsc47b397_find(unsigned int *addr) +{ + u8 id, rev; + + superio_enter(); + id = superio_inb(SUPERIO_REG_DEVID); + + if (id != 0x6f) { + superio_exit(); + return -ENODEV; + } + + rev = superio_inb(SUPERIO_REG_DEVREV); + + superio_select(SUPERIO_REG_LD8); + *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) + | superio_inb(SUPERIO_REG_BASE_LSB); + + printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC " + "(base address 0x%04x, revision %u)\n", *addr, rev); + + superio_exit(); + return 0; +} + +static int __init smsc47b397_init(void) +{ + int ret; + + if ((ret = smsc47b397_find(normal_isa))) + return ret; + + return i2c_add_driver(&smsc47b397_driver); +} + +static void __exit smsc47b397_exit(void) +{ + i2c_del_driver(&smsc47b397_driver); +} + +MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); +MODULE_DESCRIPTION("SMSC LPC47B397 driver"); +MODULE_LICENSE("GPL"); + +module_init(smsc47b397_init); +module_exit(smsc47b397_exit); diff --git a/drivers/i2c/chips/smsc47m1.c b/drivers/i2c/chips/smsc47m1.c new file mode 100644 index 000000000000..0e12ca369413 --- /dev/null +++ b/drivers/i2c/chips/smsc47m1.c @@ -0,0 +1,591 @@ +/* + smsc47m1.c - Part of lm_sensors, Linux kernel modules + for hardware monitoring + + Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x + Super-I/O chips. + + Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> + Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com> + and Jean Delvare + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/init.h> +#include <asm/io.h> + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +/* Address is autodetected, there is no default value */ +static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; +static struct i2c_force_data forces[] = {{NULL}}; + +enum chips { any_chip, smsc47m1 }; +static struct i2c_address_data addr_data = { + .normal_i2c = normal_i2c, + .normal_isa = normal_isa, + .forces = forces, +}; + +/* Super-I/0 registers and commands */ + +#define REG 0x2e /* The register to read/write */ +#define VAL 0x2f /* The value to read/write */ + +static inline void +superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int +superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +/* logical device for fans is 0x0A */ +#define superio_select() superio_outb(0x07, 0x0A) + +static inline void +superio_enter(void) +{ + outb(0x55, REG); +} + +static inline void +superio_exit(void) +{ + outb(0xAA, REG); +} + +#define SUPERIO_REG_ACT 0x30 +#define SUPERIO_REG_BASE 0x60 +#define SUPERIO_REG_DEVID 0x20 + +/* Logical device registers */ + +#define SMSC_EXTENT 0x80 + +/* nr is 0 or 1 in the macros below */ +#define SMSC47M1_REG_ALARM 0x04 +#define SMSC47M1_REG_TPIN(nr) (0x34 - (nr)) +#define SMSC47M1_REG_PPIN(nr) (0x36 - (nr)) +#define SMSC47M1_REG_PWM(nr) (0x56 + (nr)) +#define SMSC47M1_REG_FANDIV 0x58 +#define SMSC47M1_REG_FAN(nr) (0x59 + (nr)) +#define SMSC47M1_REG_FAN_PRELOAD(nr) (0x5B + (nr)) + +#define MIN_FROM_REG(reg,div) ((reg)>=192 ? 0 : \ + 983040/((192-(reg))*(div))) +#define FAN_FROM_REG(reg,div,preload) ((reg)<=(preload) || (reg)==255 ? 0 : \ + 983040/(((reg)-(preload))*(div))) +#define DIV_FROM_REG(reg) (1 << (reg)) +#define PWM_FROM_REG(reg) (((reg) & 0x7E) << 1) +#define PWM_EN_FROM_REG(reg) ((~(reg)) & 0x01) +#define PWM_TO_REG(reg) (((reg) >> 1) & 0x7E) + +struct smsc47m1_data { + struct i2c_client client; + struct semaphore lock; + + struct semaphore update_lock; + unsigned long last_updated; /* In jiffies */ + + u8 fan[2]; /* Register value */ + u8 fan_preload[2]; /* Register value */ + u8 fan_div[2]; /* Register encoding, shifted right */ + u8 alarms; /* Register encoding */ + u8 pwm[2]; /* Register value (bit 7 is enable) */ +}; + + +static int smsc47m1_attach_adapter(struct i2c_adapter *adapter); +static int smsc47m1_find(int *address); +static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind); +static int smsc47m1_detach_client(struct i2c_client *client); + +static int smsc47m1_read_value(struct i2c_client *client, u8 reg); +static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value); + +static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, + int init); + + +static struct i2c_driver smsc47m1_driver = { + .owner = THIS_MODULE, + .name = "smsc47m1", + .id = I2C_DRIVERID_SMSC47M1, + .flags = I2C_DF_NOTIFY, + .attach_adapter = smsc47m1_attach_adapter, + .detach_client = smsc47m1_detach_client, +}; + +/* nr is 0 or 1 in the callback functions below */ + +static ssize_t get_fan(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + /* This chip (stupidly) stops monitoring fan speed if PWM is + enabled and duty cycle is 0%. This is fine if the monitoring + and control concern the same fan, but troublesome if they are + not (which could as well happen). */ + int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 : + FAN_FROM_REG(data->fan[nr], + DIV_FROM_REG(data->fan_div[nr]), + data->fan_preload[nr]); + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t get_fan_min(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + int rpm = MIN_FROM_REG(data->fan_preload[nr], + DIV_FROM_REG(data->fan_div[nr])); + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t get_fan_div(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); +} + +static ssize_t get_pwm(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); +} + +static ssize_t get_pwm_en(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr])); +} + +static ssize_t get_alarms(struct device *dev, char *buf) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", data->alarms); +} + +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + long rpmdiv, val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]); + + if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) { + up(&data->update_lock); + return -EINVAL; + } + + data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv); + smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), + data->fan_preload[nr]); + up(&data->update_lock); + + return count; +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan clock divider. This follows the principle + of least suprise; the user doesn't expect the fan minimum to change just + because the divider changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + long new_div = simple_strtol(buf, NULL, 10), tmp; + u8 old_div = DIV_FROM_REG(data->fan_div[nr]); + + if (new_div == old_div) /* No change */ + return count; + + down(&data->update_lock); + switch (new_div) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + up(&data->update_lock); + return -EINVAL; + } + + tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F; + tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6); + smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp); + + /* Preserve fan min */ + tmp = 192 - (old_div * (192 - data->fan_preload[nr]) + + new_div / 2) / new_div; + data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191); + smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), + data->fan_preload[nr]); + up(&data->update_lock); + + return count; +} + +static ssize_t set_pwm(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + long val = simple_strtol(buf, NULL, 10); + + if (val < 0 || val > 255) + return -EINVAL; + + down(&data->update_lock); + data->pwm[nr] &= 0x81; /* Preserve additional bits */ + data->pwm[nr] |= PWM_TO_REG(val); + smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), + data->pwm[nr]); + up(&data->update_lock); + + return count; +} + +static ssize_t set_pwm_en(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + long val = simple_strtol(buf, NULL, 10); + + if (val != 0 && val != 1) + return -EINVAL; + + down(&data->update_lock); + data->pwm[nr] &= 0xFE; /* preserve the other bits */ + data->pwm[nr] |= !val; + smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), + data->pwm[nr]); + up(&data->update_lock); + + return count; +} + +#define fan_present(offset) \ +static ssize_t get_fan##offset (struct device *dev, char *buf) \ +{ \ + return get_fan(dev, buf, offset - 1); \ +} \ +static ssize_t get_fan##offset##_min (struct device *dev, char *buf) \ +{ \ + return get_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t get_fan##offset##_div (struct device *dev, char *buf) \ +{ \ + return get_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan##offset##_div (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset - 1); \ +} \ +static ssize_t get_pwm##offset (struct device *dev, char *buf) \ +{ \ + return get_pwm(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm(dev, buf, count, offset - 1); \ +} \ +static ssize_t get_pwm##offset##_en (struct device *dev, char *buf) \ +{ \ + return get_pwm_en(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_en (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_en(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset, \ + NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + get_fan##offset##_min, set_fan##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + get_fan##offset##_div, set_fan##offset##_div); \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + get_pwm##offset, set_pwm##offset); \ +static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + get_pwm##offset##_en, set_pwm##offset##_en); + +fan_present(1); +fan_present(2); + +static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL); + +static int smsc47m1_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, smsc47m1_detect); +} + +static int smsc47m1_find(int *address) +{ + u8 val; + + superio_enter(); + val = superio_inb(SUPERIO_REG_DEVID); + + /* + * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id + * 0x5F) and LPC47B27x (device id 0x51) have fan control. + * The LPC47M15x and LPC47M192 chips "with hardware monitoring block" + * can do much more besides (device id 0x60, unsupported). + */ + if (val == 0x51) + printk(KERN_INFO "smsc47m1: Found SMSC47B27x\n"); + else if (val == 0x59) + printk(KERN_INFO "smsc47m1: Found SMSC47M10x/SMSC47M13x\n"); + else if (val == 0x5F) + printk(KERN_INFO "smsc47m1: Found SMSC47M14x\n"); + else { + superio_exit(); + return -ENODEV; + } + + superio_select(); + *address = (superio_inb(SUPERIO_REG_BASE) << 8) + | superio_inb(SUPERIO_REG_BASE + 1); + val = superio_inb(SUPERIO_REG_ACT); + if (*address == 0 || (val & 0x01) == 0) { + printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n"); + superio_exit(); + return -ENODEV; + } + + superio_exit(); + return 0; +} + +static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct smsc47m1_data *data; + int err = 0; + int fan1, fan2, pwm1, pwm2; + + if (!i2c_is_isa_adapter(adapter)) { + return 0; + } + + if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) { + dev_err(&adapter->dev, "Region 0x%x already in use!\n", address); + return -EBUSY; + } + + if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { + err = -ENOMEM; + goto error_release; + } + memset(data, 0x00, sizeof(struct smsc47m1_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + init_MUTEX(&data->lock); + new_client->adapter = adapter; + new_client->driver = &smsc47m1_driver; + new_client->flags = 0; + + strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE); + init_MUTEX(&data->update_lock); + + /* If no function is properly configured, there's no point in + actually registering the chip. */ + fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05) + == 0x05; + fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05) + == 0x05; + pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05) + == 0x04; + pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05) + == 0x04; + if (!(fan1 || fan2 || pwm1 || pwm2)) { + dev_warn(&new_client->dev, "Device is not configured, will not use\n"); + err = -ENODEV; + goto error_free; + } + + if ((err = i2c_attach_client(new_client))) + goto error_free; + + /* Some values (fan min, clock dividers, pwm registers) may be + needed before any update is triggered, so we better read them + at least once here. We don't usually do it that way, but in + this particular case, manually reading 5 registers out of 8 + doesn't make much sense and we're better using the existing + function. */ + smsc47m1_update_device(&new_client->dev, 1); + + if (fan1) { + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + } else + dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, " + "skipping\n"); + + if (fan2) { + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + } else + dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, " + "skipping\n"); + + if (pwm1) { + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + } else + dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, " + "skipping\n"); + if (pwm2) { + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &dev_attr_pwm2_enable); + } else + dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, " + "skipping\n"); + + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +error_free: + kfree(new_client); +error_release: + release_region(address, SMSC_EXTENT); + return err; +} + +static int smsc47m1_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + release_region(client->addr, SMSC_EXTENT); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static int smsc47m1_read_value(struct i2c_client *client, u8 reg) +{ + int res; + + down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + res = inb_p(client->addr + reg); + up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + return res; +} + +static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + outb_p(value, client->addr + reg); + up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); +} + +static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, + int init) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) { + int i; + + for (i = 0; i < 2; i++) { + data->fan[i] = smsc47m1_read_value(client, + SMSC47M1_REG_FAN(i)); + data->fan_preload[i] = smsc47m1_read_value(client, + SMSC47M1_REG_FAN_PRELOAD(i)); + data->pwm[i] = smsc47m1_read_value(client, + SMSC47M1_REG_PWM(i)); + } + + i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = i >> 6; + + data->alarms = smsc47m1_read_value(client, + SMSC47M1_REG_ALARM) >> 6; + /* Clear alarms if needed */ + if (data->alarms) + smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0); + + data->last_updated = jiffies; + } + + up(&data->update_lock); + return data; +} + +static int __init sm_smsc47m1_init(void) +{ + if (smsc47m1_find(normal_isa)) { + return -ENODEV; + } + + return i2c_add_driver(&smsc47m1_driver); +} + +static void __exit sm_smsc47m1_exit(void) +{ + i2c_del_driver(&smsc47m1_driver); +} + +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver"); +MODULE_LICENSE("GPL"); + +module_init(sm_smsc47m1_init); +module_exit(sm_smsc47m1_exit); diff --git a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c new file mode 100644 index 000000000000..9b948f4531f5 --- /dev/null +++ b/drivers/i2c/chips/via686a.c @@ -0,0 +1,879 @@ +/* + via686a.c - Part of lm_sensors, Linux kernel modules + for hardware monitoring + + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, + Kyösti Mälkki <kmalkki@cc.hut.fi>, + Mark Studebaker <mdsxyz123@yahoo.com>, + and Bob Dougherty <bobd@stanford.edu> + (Some conversion-factor data were contributed by Jonathan Teh Soon Yew + <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports the Via VT82C686A, VT82C686B south bridges. + Reports all as a 686A. + Warning - only supports a single device. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/init.h> +#include <asm/io.h> + + +/* If force_addr is set to anything different from 0, we forcibly enable + the device at the given address. */ +static unsigned short force_addr = 0; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, + "Initialize the base address of the sensors"); + +/* Addresses to scan. + Note that we can't determine the ISA address until we have initialized + our module */ +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(via686a); + +/* + The Via 686a southbridge has a LM78-like chip integrated on the same IC. + This driver is a customized copy of lm78.c +*/ + +/* Many VIA686A constants specified below */ + +/* Length of ISA address segment */ +#define VIA686A_EXTENT 0x80 +#define VIA686A_BASE_REG 0x70 +#define VIA686A_ENABLE_REG 0x74 + +/* The VIA686A registers */ +/* ins numbered 0-4 */ +#define VIA686A_REG_IN_MAX(nr) (0x2b + ((nr) * 2)) +#define VIA686A_REG_IN_MIN(nr) (0x2c + ((nr) * 2)) +#define VIA686A_REG_IN(nr) (0x22 + (nr)) + +/* fans numbered 1-2 */ +#define VIA686A_REG_FAN_MIN(nr) (0x3a + (nr)) +#define VIA686A_REG_FAN(nr) (0x28 + (nr)) + +/* the following values are as speced by VIA: */ +static const u8 regtemp[] = { 0x20, 0x21, 0x1f }; +static const u8 regover[] = { 0x39, 0x3d, 0x1d }; +static const u8 reghyst[] = { 0x3a, 0x3e, 0x1e }; + +/* temps numbered 1-3 */ +#define VIA686A_REG_TEMP(nr) (regtemp[nr]) +#define VIA686A_REG_TEMP_OVER(nr) (regover[nr]) +#define VIA686A_REG_TEMP_HYST(nr) (reghyst[nr]) +#define VIA686A_REG_TEMP_LOW1 0x4b // bits 7-6 +#define VIA686A_REG_TEMP_LOW23 0x49 // 2 = bits 5-4, 3 = bits 7-6 + +#define VIA686A_REG_ALARM1 0x41 +#define VIA686A_REG_ALARM2 0x42 +#define VIA686A_REG_FANDIV 0x47 +#define VIA686A_REG_CONFIG 0x40 +/* The following register sets temp interrupt mode (bits 1-0 for temp1, + 3-2 for temp2, 5-4 for temp3). Modes are: + 00 interrupt stays as long as value is out-of-range + 01 interrupt is cleared once register is read (default) + 10 comparator mode- like 00, but ignores hysteresis + 11 same as 00 */ +#define VIA686A_REG_TEMP_MODE 0x4b +/* We'll just assume that you want to set all 3 simultaneously: */ +#define VIA686A_TEMP_MODE_MASK 0x3F +#define VIA686A_TEMP_MODE_CONTINUOUS (0x00) + +/* Conversions. Limit checking is only done on the TO_REG + variants. + +********* VOLTAGE CONVERSIONS (Bob Dougherty) ******** + From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew): + voltagefactor[0]=1.25/2628; (2628/1.25=2102.4) // Vccp + voltagefactor[1]=1.25/2628; (2628/1.25=2102.4) // +2.5V + voltagefactor[2]=1.67/2628; (2628/1.67=1573.7) // +3.3V + voltagefactor[3]=2.6/2628; (2628/2.60=1010.8) // +5V + voltagefactor[4]=6.3/2628; (2628/6.30=417.14) // +12V + in[i]=(data[i+2]*25.0+133)*voltagefactor[i]; + That is: + volts = (25*regVal+133)*factor + regVal = (volts/factor-133)/25 + (These conversions were contributed by Jonathan Teh Soon Yew + <j.teh@iname.com>) */ +static inline u8 IN_TO_REG(long val, int inNum) +{ + /* To avoid floating point, we multiply constants by 10 (100 for +12V). + Rounding is done (120500 is actually 133000 - 12500). + Remember that val is expressed in 0.001V/bit, which is why we divide + by an additional 10000 (100000 for +12V): 1000 for val and 10 (100) + for the constants. */ + if (inNum <= 1) + return (u8) + SENSORS_LIMIT((val * 21024 - 1205000) / 250000, 0, 255); + else if (inNum == 2) + return (u8) + SENSORS_LIMIT((val * 15737 - 1205000) / 250000, 0, 255); + else if (inNum == 3) + return (u8) + SENSORS_LIMIT((val * 10108 - 1205000) / 250000, 0, 255); + else + return (u8) + SENSORS_LIMIT((val * 41714 - 12050000) / 2500000, 0, 255); +} + +static inline long IN_FROM_REG(u8 val, int inNum) +{ + /* To avoid floating point, we multiply constants by 10 (100 for +12V). + We also multiply them by 1000 because we want 0.001V/bit for the + output value. Rounding is done. */ + if (inNum <= 1) + return (long) ((250000 * val + 1330000 + 21024 / 2) / 21024); + else if (inNum == 2) + return (long) ((250000 * val + 1330000 + 15737 / 2) / 15737); + else if (inNum == 3) + return (long) ((250000 * val + 1330000 + 10108 / 2) / 10108); + else + return (long) ((2500000 * val + 13300000 + 41714 / 2) / 41714); +} + +/********* FAN RPM CONVERSIONS ********/ +/* Higher register values = slower fans (the fan's strobe gates a counter). + But this chip saturates back at 0, not at 255 like all the other chips. + So, 0 means 0 RPM */ +static inline u8 FAN_TO_REG(long rpm, int div) +{ + if (rpm == 0) + return 0; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255); +} + +#define FAN_FROM_REG(val,div) ((val)==0?0:(val)==255?0:1350000/((val)*(div))) + +/******** TEMP CONVERSIONS (Bob Dougherty) *********/ +/* linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew) + if(temp<169) + return double(temp)*0.427-32.08; + else if(temp>=169 && temp<=202) + return double(temp)*0.582-58.16; + else + return double(temp)*0.924-127.33; + + A fifth-order polynomial fits the unofficial data (provided by Alex van + Kaam <darkside@chello.nl>) a bit better. It also give more reasonable + numbers on my machine (ie. they agree with what my BIOS tells me). + Here's the fifth-order fit to the 8-bit data: + temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 - + 2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0. + + (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for + finding my typos in this formula!) + + Alas, none of the elegant function-fit solutions will work because we + aren't allowed to use floating point in the kernel and doing it with + integers doesn't rpovide enough precision. So we'll do boring old + look-up table stuff. The unofficial data (see below) have effectively + 7-bit resolution (they are rounded to the nearest degree). I'm assuming + that the transfer function of the device is monotonic and smooth, so a + smooth function fit to the data will allow us to get better precision. + I used the 5th-order poly fit described above and solved for + VIA register values 0-255. I *10 before rounding, so we get tenth-degree + precision. (I could have done all 1024 values for our 10-bit readings, + but the function is very linear in the useful range (0-80 deg C), so + we'll just use linear interpolation for 10-bit readings.) So, tempLUT + is the temp at via register values 0-255: */ +static const long tempLUT[] = + { -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519, + -503, -487, -471, -456, -442, -428, -414, -400, -387, -375, + -362, -350, -339, -327, -316, -305, -295, -285, -275, -265, + -255, -246, -237, -229, -220, -212, -204, -196, -188, -180, + -173, -166, -159, -152, -145, -139, -132, -126, -120, -114, + -108, -102, -96, -91, -85, -80, -74, -69, -64, -59, -54, -49, + -44, -39, -34, -29, -25, -20, -15, -11, -6, -2, 3, 7, 12, 16, + 20, 25, 29, 33, 37, 42, 46, 50, 54, 59, 63, 67, 71, 75, 79, 84, + 88, 92, 96, 100, 104, 109, 113, 117, 121, 125, 130, 134, 138, + 142, 146, 151, 155, 159, 163, 168, 172, 176, 181, 185, 189, + 193, 198, 202, 206, 211, 215, 219, 224, 228, 232, 237, 241, + 245, 250, 254, 259, 263, 267, 272, 276, 281, 285, 290, 294, + 299, 303, 307, 312, 316, 321, 325, 330, 334, 339, 344, 348, + 353, 357, 362, 366, 371, 376, 380, 385, 390, 395, 399, 404, + 409, 414, 419, 423, 428, 433, 438, 443, 449, 454, 459, 464, + 469, 475, 480, 486, 491, 497, 502, 508, 514, 520, 526, 532, + 538, 544, 551, 557, 564, 571, 578, 584, 592, 599, 606, 614, + 621, 629, 637, 645, 654, 662, 671, 680, 689, 698, 708, 718, + 728, 738, 749, 759, 770, 782, 793, 805, 818, 830, 843, 856, + 870, 883, 898, 912, 927, 943, 958, 975, 991, 1008, 1026, 1044, + 1062, 1081, 1101, 1121, 1141, 1162, 1184, 1206, 1229, 1252, + 1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462 +}; + +/* the original LUT values from Alex van Kaam <darkside@chello.nl> + (for via register values 12-240): +{-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31, +-30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15, +-15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3, +-3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12, +12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22, +22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33, +33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45, +45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60, +61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84, +85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110}; + + + Here's the reverse LUT. I got it by doing a 6-th order poly fit (needed + an extra term for a good fit to these inverse data!) and then + solving for each temp value from -50 to 110 (the useable range for + this chip). Here's the fit: + viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4 + - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01) + Note that n=161: */ +static const u8 viaLUT[] = + { 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23, + 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40, + 41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66, + 69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100, + 103, 105, 107, 110, 112, 115, 117, 119, 122, 124, 126, 129, + 131, 134, 136, 138, 140, 143, 145, 147, 150, 152, 154, 156, + 158, 160, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180, + 182, 183, 185, 187, 188, 190, 192, 193, 195, 196, 198, 199, + 200, 202, 203, 205, 206, 207, 208, 209, 210, 211, 212, 213, + 214, 215, 216, 217, 218, 219, 220, 221, 222, 222, 223, 224, + 225, 226, 226, 227, 228, 228, 229, 230, 230, 231, 232, 232, + 233, 233, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239, + 239, 240 +}; + +/* Converting temps to (8-bit) hyst and over registers + No interpolation here. + The +50 is because the temps start at -50 */ +static inline u8 TEMP_TO_REG(long val) +{ + return viaLUT[val <= -50000 ? 0 : val >= 110000 ? 160 : + (val < 0 ? val - 500 : val + 500) / 1000 + 50]; +} + +/* for 8-bit temperature hyst and over registers */ +#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100) + +/* for 10-bit temperature readings */ +static inline long TEMP_FROM_REG10(u16 val) +{ + u16 eightBits = val >> 2; + u16 twoBits = val & 3; + + /* no interpolation for these */ + if (twoBits == 0 || eightBits == 255) + return TEMP_FROM_REG(eightBits); + + /* do some linear interpolation */ + return (tempLUT[eightBits] * (4 - twoBits) + + tempLUT[eightBits + 1] * twoBits) * 25; +} + +#define ALARMS_FROM_REG(val) (val) + +#define DIV_FROM_REG(val) (1 << (val)) +#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1) + +/* For the VIA686A, we need to keep some data in memory. + The structure is dynamically allocated, at the same time when a new + via686a client is allocated. */ +struct via686a_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 in[5]; /* Register value */ + u8 in_max[5]; /* Register value */ + u8 in_min[5]; /* Register value */ + u8 fan[2]; /* Register value */ + u8 fan_min[2]; /* Register value */ + u16 temp[3]; /* Register value 10 bit */ + u8 temp_over[3]; /* Register value */ + u8 temp_hyst[3]; /* Register value */ + u8 fan_div[2]; /* Register encoding, shifted right */ + u16 alarms; /* Register encoding, combined */ +}; + +static struct pci_dev *s_bridge; /* pointer to the (only) via686a */ + +static int via686a_attach_adapter(struct i2c_adapter *adapter); +static int via686a_detect(struct i2c_adapter *adapter, int address, int kind); +static int via686a_detach_client(struct i2c_client *client); + +static inline int via686a_read_value(struct i2c_client *client, u8 reg) +{ + return (inb_p(client->addr + reg)); +} + +static inline void via686a_write_value(struct i2c_client *client, u8 reg, + u8 value) +{ + outb_p(value, client->addr + reg); +} + +static struct via686a_data *via686a_update_device(struct device *dev); +static void via686a_init_client(struct i2c_client *client); + +/* following are the sysfs callback functions */ + +/* 7 voltage sensors */ +static ssize_t show_in(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr)); +} + +static ssize_t show_in_min(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr)); +} + +static ssize_t show_in_max(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr)); +} + +static ssize_t set_in_min(struct device *dev, const char *buf, + size_t count, int nr) { + struct i2c_client *client = to_i2c_client(dev); + struct via686a_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val,nr); + via686a_write_value(client, VIA686A_REG_IN_MIN(nr), + data->in_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t set_in_max(struct device *dev, const char *buf, + size_t count, int nr) { + struct i2c_client *client = to_i2c_client(dev); + struct via686a_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val,nr); + via686a_write_value(client, VIA686A_REG_IN_MAX(nr), + data->in_max[nr]); + up(&data->update_lock); + return count; +} +#define show_in_offset(offset) \ +static ssize_t \ + show_in##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static ssize_t \ + show_in##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t \ + show_in##offset##_max (struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t set_in##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t set_in##offset##_max (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);\ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); + +show_in_offset(0); +show_in_offset(1); +show_in_offset(2); +show_in_offset(3); +show_in_offset(4); + +/* 3 temperatures */ +static ssize_t show_temp(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])); +} +static ssize_t show_temp_over(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])); +} +static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])); +} +static ssize_t set_temp_over(struct device *dev, const char *buf, + size_t count, int nr) { + struct i2c_client *client = to_i2c_client(dev); + struct via686a_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_over[nr] = TEMP_TO_REG(val); + via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]); + up(&data->update_lock); + return count; +} +static ssize_t set_temp_hyst(struct device *dev, const char *buf, + size_t count, int nr) { + struct i2c_client *client = to_i2c_client(dev); + struct via686a_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_hyst[nr] = TEMP_TO_REG(val); + via686a_write_value(client, VIA686A_REG_TEMP_HYST(nr), data->temp_hyst[nr]); + up(&data->update_lock); + return count; +} +#define show_temp_offset(offset) \ +static ssize_t show_temp_##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset - 1); \ +} \ +static ssize_t \ +show_temp_##offset##_over (struct device *dev, char *buf) \ +{ \ + return show_temp_over(dev, buf, offset - 1); \ +} \ +static ssize_t \ +show_temp_##offset##_hyst (struct device *dev, char *buf) \ +{ \ + return show_temp_hyst(dev, buf, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_over (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_over(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_temp_##offset##_hyst (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_temp_hyst(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL);\ +static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_over, set_temp_##offset##_over); \ +static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \ + show_temp_##offset##_hyst, set_temp_##offset##_hyst); + +show_temp_offset(1); +show_temp_offset(2); +show_temp_offset(3); + +/* 2 Fans */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], + DIV_FROM_REG(data->fan_div[nr])) ); +} +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf,"%d\n", + FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) ); +} +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf,"%d\n", DIV_FROM_REG(data->fan_div[nr]) ); +} +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) { + struct i2c_client *client = to_i2c_client(dev); + struct via686a_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]); + up(&data->update_lock); + return count; +} +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) { + struct i2c_client *client = to_i2c_client(dev); + struct via686a_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + int old; + + down(&data->update_lock); + old = via686a_read_value(client, VIA686A_REG_FANDIV); + data->fan_div[nr] = DIV_TO_REG(val); + old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4); + via686a_write_value(client, VIA686A_REG_FANDIV, old); + up(&data->update_lock); + return count; +} + +#define show_fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_div (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_div, set_fan_##offset##_div); + +show_fan_offset(1); +show_fan_offset(2); + +/* Alarms */ +static ssize_t show_alarms(struct device *dev, char *buf) { + struct via686a_data *data = via686a_update_device(dev); + return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms)); +} +static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL); + +/* The driver. I choose to use type i2c_driver, as at is identical to both + smbus_driver and isa_driver, and clients could be of either kind */ +static struct i2c_driver via686a_driver = { + .owner = THIS_MODULE, + .name = "via686a", + .id = I2C_DRIVERID_VIA686A, + .flags = I2C_DF_NOTIFY, + .attach_adapter = via686a_attach_adapter, + .detach_client = via686a_detach_client, +}; + + +/* This is called when the module is loaded */ +static int via686a_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, via686a_detect); +} + +static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct via686a_data *data; + int err = 0; + const char client_name[] = "via686a"; + u16 val; + + /* Make sure we are probing the ISA bus!! */ + if (!i2c_is_isa_adapter(adapter)) { + dev_err(&adapter->dev, + "via686a_detect called for an I2C bus adapter?!?\n"); + return 0; + } + + /* 8231 requires multiple of 256, we enforce that on 686 as well */ + if(force_addr) + address = force_addr & 0xFF00; + + if(force_addr) { + dev_warn(&adapter->dev,"forcing ISA address 0x%04X\n", address); + if (PCIBIOS_SUCCESSFUL != + pci_write_config_word(s_bridge, VIA686A_BASE_REG, address)) + return -ENODEV; + } + if (PCIBIOS_SUCCESSFUL != + pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val)) + return -ENODEV; + if (!(val & 0x0001)) { + dev_warn(&adapter->dev,"enabling sensors\n"); + if (PCIBIOS_SUCCESSFUL != + pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, + val | 0x0001)) + return -ENODEV; + } + + /* Reserve the ISA region */ + if (!request_region(address, VIA686A_EXTENT, via686a_driver.name)) { + dev_err(&adapter->dev,"region 0x%x already in use!\n", + address); + return -ENODEV; + } + + if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR0; + } + memset(data, 0, sizeof(struct via686a_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &via686a_driver; + new_client->flags = 0; + new_client->dev.parent = &adapter->dev; + + /* Fill in the remaining client fields and put into the global list */ + snprintf(new_client->name, I2C_NAME_SIZE, client_name); + + data->valid = 0; + init_MUTEX(&data->update_lock); + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR3; + + /* Initialize the VIA686A chip */ + via686a_init_client(new_client); + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst); + device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + + ERROR3: + kfree(data); + ERROR0: + release_region(address, VIA686A_EXTENT); + return err; +} + +static int via686a_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + release_region(client->addr, VIA686A_EXTENT); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +/* Called when we have found a new VIA686A. Set limits, etc. */ +static void via686a_init_client(struct i2c_client *client) +{ + u8 reg; + + /* Start monitoring */ + reg = via686a_read_value(client, VIA686A_REG_CONFIG); + via686a_write_value(client, VIA686A_REG_CONFIG, (reg|0x01)&0x7F); + + /* Configure temp interrupt mode for continuous-interrupt operation */ + via686a_write_value(client, VIA686A_REG_TEMP_MODE, + via686a_read_value(client, VIA686A_REG_TEMP_MODE) & + !(VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS)); +} + +static struct via686a_data *via686a_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct via686a_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + for (i = 0; i <= 4; i++) { + data->in[i] = + via686a_read_value(client, VIA686A_REG_IN(i)); + data->in_min[i] = via686a_read_value(client, + VIA686A_REG_IN_MIN + (i)); + data->in_max[i] = + via686a_read_value(client, VIA686A_REG_IN_MAX(i)); + } + for (i = 1; i <= 2; i++) { + data->fan[i - 1] = + via686a_read_value(client, VIA686A_REG_FAN(i)); + data->fan_min[i - 1] = via686a_read_value(client, + VIA686A_REG_FAN_MIN(i)); + } + for (i = 0; i <= 2; i++) { + data->temp[i] = via686a_read_value(client, + VIA686A_REG_TEMP(i)) << 2; + data->temp_over[i] = + via686a_read_value(client, + VIA686A_REG_TEMP_OVER(i)); + data->temp_hyst[i] = + via686a_read_value(client, + VIA686A_REG_TEMP_HYST(i)); + } + /* add in lower 2 bits + temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1 + temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23 + temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23 + */ + data->temp[0] |= (via686a_read_value(client, + VIA686A_REG_TEMP_LOW1) + & 0xc0) >> 6; + data->temp[1] |= + (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) & + 0x30) >> 4; + data->temp[2] |= + (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) & + 0xc0) >> 6; + + i = via686a_read_value(client, VIA686A_REG_FANDIV); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = i >> 6; + data->alarms = + via686a_read_value(client, + VIA686A_REG_ALARM1) | + (via686a_read_value(client, VIA686A_REG_ALARM2) << 8); + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static struct pci_device_id via686a_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, via686a_pci_ids); + +static int __devinit via686a_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + u16 val; + int addr = 0; + + if (PCIBIOS_SUCCESSFUL != + pci_read_config_word(dev, VIA686A_BASE_REG, &val)) + return -ENODEV; + + addr = val & ~(VIA686A_EXTENT - 1); + if (addr == 0 && force_addr == 0) { + dev_err(&dev->dev,"base address not set - upgrade BIOS or use force_addr=0xaddr\n"); + return -ENODEV; + } + if (force_addr) + addr = force_addr; /* so detect will get called */ + + if (!addr) { + dev_err(&dev->dev,"No Via 686A sensors found.\n"); + return -ENODEV; + } + normal_isa[0] = addr; + + s_bridge = pci_dev_get(dev); + if (i2c_add_driver(&via686a_driver)) { + pci_dev_put(s_bridge); + s_bridge = NULL; + } + + /* Always return failure here. This is to allow other drivers to bind + * to this pci device. We don't really want to have control over the + * pci device, we only wanted to read as few register values from it. + */ + return -ENODEV; +} + +static struct pci_driver via686a_pci_driver = { + .name = "via686a", + .id_table = via686a_pci_ids, + .probe = via686a_pci_probe, +}; + +static int __init sm_via686a_init(void) +{ + return pci_register_driver(&via686a_pci_driver); +} + +static void __exit sm_via686a_exit(void) +{ + pci_unregister_driver(&via686a_pci_driver); + if (s_bridge != NULL) { + i2c_del_driver(&via686a_driver); + pci_dev_put(s_bridge); + s_bridge = NULL; + } +} + +MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>, " + "Mark Studebaker <mdsxyz123@yahoo.com> " + "and Bob Dougherty <bobd@stanford.edu>"); +MODULE_DESCRIPTION("VIA 686A Sensor device"); +MODULE_LICENSE("GPL"); + +module_init(sm_via686a_init); +module_exit(sm_via686a_exit); diff --git a/drivers/i2c/chips/w83627hf.c b/drivers/i2c/chips/w83627hf.c new file mode 100644 index 000000000000..b1da5ed696d3 --- /dev/null +++ b/drivers/i2c/chips/w83627hf.c @@ -0,0 +1,1511 @@ +/* + w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + and Mark Studebaker <mdsxyz123@yahoo.com> + Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports following chips: + + Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC) + w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) + w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC) + w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) + + For other winbond chips, and for i2c support in the above chips, + use w83781d.c. + + Note: automatic ("cruise") fan control for 697, 637 & 627thf not + supported yet. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> +#include <asm/io.h> +#include "lm75.h" + +static u16 force_addr; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, + "Initialize the base address of the sensors"); +static u8 force_i2c = 0x1f; +module_param(force_i2c, byte, 0); +MODULE_PARM_DESC(force_i2c, + "Initialize the i2c address of the sensors"); + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf); + +static int init = 1; +module_param(init, bool, 0); +MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); + +/* modified from kernel/include/traps.c */ +static int REG; /* The register to read/write */ +#define DEV 0x07 /* Register: Logical device select */ +static int VAL; /* The value to read/write */ + +/* logical device numbers for superio_select (below) */ +#define W83627HF_LD_FDC 0x00 +#define W83627HF_LD_PRT 0x01 +#define W83627HF_LD_UART1 0x02 +#define W83627HF_LD_UART2 0x03 +#define W83627HF_LD_KBC 0x05 +#define W83627HF_LD_CIR 0x06 /* w83627hf only */ +#define W83627HF_LD_GAME 0x07 +#define W83627HF_LD_MIDI 0x07 +#define W83627HF_LD_GPIO1 0x07 +#define W83627HF_LD_GPIO5 0x07 /* w83627thf only */ +#define W83627HF_LD_GPIO2 0x08 +#define W83627HF_LD_GPIO3 0x09 +#define W83627HF_LD_GPIO4 0x09 /* w83627thf only */ +#define W83627HF_LD_ACPI 0x0a +#define W83627HF_LD_HWM 0x0b + +#define DEVID 0x20 /* Register: Device ID */ + +#define W83627THF_GPIO5_EN 0x30 /* w83627thf only */ +#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */ +#define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */ + +static inline void +superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int +superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static inline void +superio_select(int ld) +{ + outb(DEV, REG); + outb(ld, VAL); +} + +static inline void +superio_enter(void) +{ + outb(0x87, REG); + outb(0x87, REG); +} + +static inline void +superio_exit(void) +{ + outb(0xAA, REG); +} + +#define W627_DEVID 0x52 +#define W627THF_DEVID 0x82 +#define W697_DEVID 0x60 +#define W637_DEVID 0x70 +#define WINB_ACT_REG 0x30 +#define WINB_BASE_REG 0x60 +/* Constants specified below */ + +/* Length of ISA address segment */ +#define WINB_EXTENT 8 + +/* Where are the ISA address/data registers relative to the base address */ +#define W83781D_ADDR_REG_OFFSET 5 +#define W83781D_DATA_REG_OFFSET 6 + +/* The W83781D registers */ +/* The W83782D registers for nr=7,8 are in bank 5 */ +#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ + (0x554 + (((nr) - 7) * 2))) +#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ + (0x555 + (((nr) - 7) * 2))) +#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ + (0x550 + (nr) - 7)) + +#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr)) +#define W83781D_REG_FAN(nr) (0x27 + (nr)) + +#define W83781D_REG_TEMP2_CONFIG 0x152 +#define W83781D_REG_TEMP3_CONFIG 0x252 +#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \ + ((nr == 2) ? (0x0150) : \ + (0x27))) +#define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \ + ((nr == 2) ? (0x153) : \ + (0x3A))) +#define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \ + ((nr == 2) ? (0x155) : \ + (0x39))) + +#define W83781D_REG_BANK 0x4E + +#define W83781D_REG_CONFIG 0x40 +#define W83781D_REG_ALARM1 0x41 +#define W83781D_REG_ALARM2 0x42 +#define W83781D_REG_ALARM3 0x450 + +#define W83781D_REG_IRQ 0x4C +#define W83781D_REG_BEEP_CONFIG 0x4D +#define W83781D_REG_BEEP_INTS1 0x56 +#define W83781D_REG_BEEP_INTS2 0x57 +#define W83781D_REG_BEEP_INTS3 0x453 + +#define W83781D_REG_VID_FANDIV 0x47 + +#define W83781D_REG_CHIPID 0x49 +#define W83781D_REG_WCHIPID 0x58 +#define W83781D_REG_CHIPMAN 0x4F +#define W83781D_REG_PIN 0x4B + +#define W83781D_REG_VBAT 0x5D + +#define W83627HF_REG_PWM1 0x5A +#define W83627HF_REG_PWM2 0x5B +#define W83627HF_REG_PWMCLK12 0x5C + +#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */ +#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */ +#define W83627THF_REG_PWM3 0x11 /* 637HF too */ + +#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF too */ + +static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 }; +static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2, + W83627THF_REG_PWM3 }; +#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \ + regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1]) + +#define W83781D_REG_I2C_ADDR 0x48 +#define W83781D_REG_I2C_SUBADDR 0x4A + +/* Sensor selection */ +#define W83781D_REG_SCFG1 0x5D +static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 }; +#define W83781D_REG_SCFG2 0x59 +static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 }; +#define W83781D_DEFAULT_BETA 3435 + +/* Conversions. Limit checking is only done on the TO_REG + variants. Note that you should be a bit careful with which arguments + these macros are called: arguments may be evaluated more than once. + Fixing this is just not worth it. */ +#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255)) +#define IN_FROM_REG(val) ((val) * 16) + +static inline u8 FAN_TO_REG(long rpm, int div) +{ + if (rpm == 0) + return 255; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, + 254); +} + +#define TEMP_MIN (-128000) +#define TEMP_MAX ( 127000) + +/* TEMP: 0.001C/bit (-128C to +127C) + REG: 1C/bit, two's complement */ +static u8 TEMP_TO_REG(int temp) +{ + int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX); + ntemp += (ntemp<0 ? -500 : 500); + return (u8)(ntemp / 1000); +} + +static int TEMP_FROM_REG(u8 reg) +{ + return (s8)reg * 1000; +} + +#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) + +#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255)) + +#define BEEP_MASK_FROM_REG(val) (val) +#define BEEP_MASK_TO_REG(val) ((val) & 0xffffff) +#define BEEP_ENABLE_TO_REG(val) ((val)?1:0) +#define BEEP_ENABLE_FROM_REG(val) ((val)?1:0) + +#define DIV_FROM_REG(val) (1 << (val)) + +static inline u8 DIV_TO_REG(long val) +{ + int i; + val = SENSORS_LIMIT(val, 1, 128) >> 1; + for (i = 0; i < 6; i++) { + if (val == 0) + break; + val >>= 1; + } + return ((u8) i); +} + +/* For each registered chip, we need to keep some data in memory. That + data is pointed to by w83627hf_list[NR]->data. The structure itself is + dynamically allocated, at the same time when a new client is allocated. */ +struct w83627hf_data { + struct i2c_client client; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + struct i2c_client *lm75; /* for secondary I2C addresses */ + /* pointer to array of 2 subclients */ + + u8 in[9]; /* Register value */ + u8 in_max[9]; /* Register value */ + u8 in_min[9]; /* Register value */ + u8 fan[3]; /* Register value */ + u8 fan_min[3]; /* Register value */ + u8 temp; + u8 temp_max; /* Register value */ + u8 temp_max_hyst; /* Register value */ + u16 temp_add[2]; /* Register value */ + u16 temp_max_add[2]; /* Register value */ + u16 temp_max_hyst_add[2]; /* Register value */ + u8 fan_div[3]; /* Register encoding, shifted right */ + u8 vid; /* Register encoding, combined */ + u32 alarms; /* Register encoding, combined */ + u32 beep_mask; /* Register encoding, combined */ + u8 beep_enable; /* Boolean */ + u8 pwm[3]; /* Register value */ + u16 sens[3]; /* 782D/783S only. + 1 = pentium diode; 2 = 3904 diode; + 3000-5000 = thermistor beta. + Default = 3435. + Other Betas unimplemented */ + u8 vrm; + u8 vrm_ovt; /* Register value, 627thf & 637hf only */ +}; + + +static int w83627hf_attach_adapter(struct i2c_adapter *adapter); +static int w83627hf_detect(struct i2c_adapter *adapter, int address, + int kind); +static int w83627hf_detach_client(struct i2c_client *client); + +static int w83627hf_read_value(struct i2c_client *client, u16 register); +static int w83627hf_write_value(struct i2c_client *client, u16 register, + u16 value); +static struct w83627hf_data *w83627hf_update_device(struct device *dev); +static void w83627hf_init_client(struct i2c_client *client); + +static struct i2c_driver w83627hf_driver = { + .owner = THIS_MODULE, + .name = "w83627hf", + .id = I2C_DRIVERID_W83627HF, + .flags = I2C_DF_NOTIFY, + .attach_adapter = w83627hf_attach_adapter, + .detach_client = w83627hf_detach_client, +}; + +/* following are the sysfs callback functions */ +#define show_in_reg(reg) \ +static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct w83627hf_data *data = w83627hf_update_device(dev); \ + return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \ +} +show_in_reg(in) +show_in_reg(in_min) +show_in_reg(in_max) + +#define store_in_reg(REG, reg) \ +static ssize_t \ +store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627hf_data *data = i2c_get_clientdata(client); \ + u32 val; \ + \ + val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->in_##reg[nr] = IN_TO_REG(val); \ + w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \ + data->in_##reg[nr]); \ + \ + up(&data->update_lock); \ + return count; \ +} +store_in_reg(MIN, min) +store_in_reg(MAX, max) + +#define sysfs_in_offset(offset) \ +static ssize_t \ +show_regs_in_##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL); + +#define sysfs_in_reg_offset(reg, offset) \ +static ssize_t show_regs_in_##reg##offset (struct device *dev, char *buf) \ +{ \ + return show_in_##reg (dev, buf, offset); \ +} \ +static ssize_t \ +store_regs_in_##reg##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return store_in_##reg (dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \ + show_regs_in_##reg##offset, store_regs_in_##reg##offset); + +#define sysfs_in_offsets(offset) \ +sysfs_in_offset(offset) \ +sysfs_in_reg_offset(min, offset) \ +sysfs_in_reg_offset(max, offset) + +sysfs_in_offsets(1); +sysfs_in_offsets(2); +sysfs_in_offsets(3); +sysfs_in_offsets(4); +sysfs_in_offsets(5); +sysfs_in_offsets(6); +sysfs_in_offsets(7); +sysfs_in_offsets(8); + +/* use a different set of functions for in0 */ +static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg) +{ + long in0; + + if ((data->vrm_ovt & 0x01) && + (w83627thf == data->type || w83637hf == data->type)) + + /* use VRM9 calculation */ + in0 = (long)((reg * 488 + 70000 + 50) / 100); + else + /* use VRM8 (standard) calculation */ + in0 = (long)IN_FROM_REG(reg); + + return sprintf(buf,"%ld\n", in0); +} + +static ssize_t show_regs_in_0(struct device *dev, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return show_in_0(data, buf, data->in[0]); +} + +static ssize_t show_regs_in_min0(struct device *dev, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return show_in_0(data, buf, data->in_min[0]); +} + +static ssize_t show_regs_in_max0(struct device *dev, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return show_in_0(data, buf, data->in_max[0]); +} + +static ssize_t store_regs_in_min0(struct device *dev, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + if ((data->vrm_ovt & 0x01) && + (w83627thf == data->type || w83637hf == data->type)) + + /* use VRM9 calculation */ + data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488); + else + /* use VRM8 (standard) calculation */ + data->in_min[0] = IN_TO_REG(val); + + w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]); + up(&data->update_lock); + return count; +} + +static ssize_t store_regs_in_max0(struct device *dev, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + if ((data->vrm_ovt & 0x01) && + (w83627thf == data->type || w83637hf == data->type)) + + /* use VRM9 calculation */ + data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488); + else + /* use VRM8 (standard) calculation */ + data->in_max[0] = IN_TO_REG(val); + + w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]); + up(&data->update_lock); + return count; +} + +static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL); +static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, + show_regs_in_min0, store_regs_in_min0); +static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, + show_regs_in_max0, store_regs_in_max0); + +#define device_create_file_in(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_in##offset##_input); \ +device_create_file(&client->dev, &dev_attr_in##offset##_min); \ +device_create_file(&client->dev, &dev_attr_in##offset##_max); \ +} while (0) + +#define show_fan_reg(reg) \ +static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct w83627hf_data *data = w83627hf_update_device(dev); \ + return sprintf(buf,"%ld\n", \ + FAN_FROM_REG(data->reg[nr-1], \ + (long)DIV_FROM_REG(data->fan_div[nr-1]))); \ +} +show_fan_reg(fan); +show_fan_reg(fan_min); + +static ssize_t +store_fan_min(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr - 1] = + FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1])); + w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr), + data->fan_min[nr - 1]); + + up(&data->update_lock); + return count; +} + +#define sysfs_fan_offset(offset) \ +static ssize_t show_regs_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL); + +#define sysfs_fan_min_offset(offset) \ +static ssize_t show_regs_fan_min##offset (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset); \ +} \ +static ssize_t \ +store_regs_fan_min##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_fan_min(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_regs_fan_min##offset, store_regs_fan_min##offset); + +sysfs_fan_offset(1); +sysfs_fan_min_offset(1); +sysfs_fan_offset(2); +sysfs_fan_min_offset(2); +sysfs_fan_offset(3); +sysfs_fan_min_offset(3); + +#define device_create_file_fan(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ +device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ +} while (0) + +#define show_temp_reg(reg) \ +static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct w83627hf_data *data = w83627hf_update_device(dev); \ + if (nr >= 2) { /* TEMP2 and TEMP3 */ \ + return sprintf(buf,"%ld\n", \ + (long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \ + } else { /* TEMP1 */ \ + return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \ + } \ +} +show_temp_reg(temp); +show_temp_reg(temp_max); +show_temp_reg(temp_max_hyst); + +#define store_temp_reg(REG, reg) \ +static ssize_t \ +store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627hf_data *data = i2c_get_clientdata(client); \ + u32 val; \ + \ + val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + \ + if (nr >= 2) { /* TEMP2 and TEMP3 */ \ + data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \ + w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \ + data->temp_##reg##_add[nr-2]); \ + } else { /* TEMP1 */ \ + data->temp_##reg = TEMP_TO_REG(val); \ + w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \ + data->temp_##reg); \ + } \ + \ + up(&data->update_lock); \ + return count; \ +} +store_temp_reg(OVER, max); +store_temp_reg(HYST, max_hyst); + +#define sysfs_temp_offset(offset) \ +static ssize_t \ +show_regs_temp_##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL); + +#define sysfs_temp_reg_offset(reg, offset) \ +static ssize_t show_regs_temp_##reg##offset (struct device *dev, char *buf) \ +{ \ + return show_temp_##reg (dev, buf, offset); \ +} \ +static ssize_t \ +store_regs_temp_##reg##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return store_temp_##reg (dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \ + show_regs_temp_##reg##offset, store_regs_temp_##reg##offset); + +#define sysfs_temp_offsets(offset) \ +sysfs_temp_offset(offset) \ +sysfs_temp_reg_offset(max, offset) \ +sysfs_temp_reg_offset(max_hyst, offset) + +sysfs_temp_offsets(1); +sysfs_temp_offsets(2); +sysfs_temp_offsets(3); + +#define device_create_file_temp(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ +device_create_file(&client->dev, &dev_attr_temp##offset##_max); \ +device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \ +} while (0) + +static ssize_t +show_vid_reg(struct device *dev, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); +#define device_create_file_vid(client) \ +device_create_file(&client->dev, &dev_attr_cpu0_vid) + +static ssize_t +show_vrm_reg(struct device *dev, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->vrm); +} +static ssize_t +store_vrm_reg(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + data->vrm = val; + + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); +#define device_create_file_vrm(client) \ +device_create_file(&client->dev, &dev_attr_vrm) + +static ssize_t +show_alarms_reg(struct device *dev, char *buf) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); +#define device_create_file_alarms(client) \ +device_create_file(&client->dev, &dev_attr_alarms) + +#define show_beep_reg(REG, reg) \ +static ssize_t show_beep_##reg (struct device *dev, char *buf) \ +{ \ + struct w83627hf_data *data = w83627hf_update_device(dev); \ + return sprintf(buf,"%ld\n", \ + (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \ +} +show_beep_reg(ENABLE, enable) +show_beep_reg(MASK, mask) + +#define BEEP_ENABLE 0 /* Store beep_enable */ +#define BEEP_MASK 1 /* Store beep_mask */ + +static ssize_t +store_beep_reg(struct device *dev, const char *buf, size_t count, + int update_mask) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + u32 val, val2; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + if (update_mask == BEEP_MASK) { /* We are storing beep_mask */ + data->beep_mask = BEEP_MASK_TO_REG(val); + w83627hf_write_value(client, W83781D_REG_BEEP_INTS1, + data->beep_mask & 0xff); + w83627hf_write_value(client, W83781D_REG_BEEP_INTS3, + ((data->beep_mask) >> 16) & 0xff); + val2 = (data->beep_mask >> 8) & 0x7f; + } else { /* We are storing beep_enable */ + val2 = + w83627hf_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f; + data->beep_enable = BEEP_ENABLE_TO_REG(val); + } + + w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, + val2 | data->beep_enable << 7); + + up(&data->update_lock); + return count; +} + +#define sysfs_beep(REG, reg) \ +static ssize_t show_regs_beep_##reg (struct device *dev, char *buf) \ +{ \ + return show_beep_##reg(dev, buf); \ +} \ +static ssize_t \ +store_regs_beep_##reg (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_beep_reg(dev, buf, count, BEEP_##REG); \ +} \ +static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \ + show_regs_beep_##reg, store_regs_beep_##reg); + +sysfs_beep(ENABLE, enable); +sysfs_beep(MASK, mask); + +#define device_create_file_beep(client) \ +do { \ +device_create_file(&client->dev, &dev_attr_beep_enable); \ +device_create_file(&client->dev, &dev_attr_beep_mask); \ +} while (0) + +static ssize_t +show_fan_div_reg(struct device *dev, char *buf, int nr) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", + (long) DIV_FROM_REG(data->fan_div[nr - 1])); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least suprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t +store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + unsigned long min; + u8 reg; + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + /* Save fan_min */ + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + + data->fan_div[nr] = DIV_TO_REG(val); + + reg = (w83627hf_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV) + & (nr==0 ? 0xcf : 0x3f)) + | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6)); + w83627hf_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg); + + reg = (w83627hf_read_value(client, W83781D_REG_VBAT) + & ~(1 << (5 + nr))) + | ((data->fan_div[nr] & 0x04) << (3 + nr)); + w83627hf_write_value(client, W83781D_REG_VBAT, reg); + + /* Restore fan_min */ + data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]); + + up(&data->update_lock); + return count; +} + +#define sysfs_fan_div(offset) \ +static ssize_t show_regs_fan_div_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan_div_reg(dev, buf, offset); \ +} \ +static ssize_t \ +store_regs_fan_div_##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return store_fan_div_reg(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_regs_fan_div_##offset, store_regs_fan_div_##offset); + +sysfs_fan_div(1); +sysfs_fan_div(2); +sysfs_fan_div(3); + +#define device_create_file_fan_div(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ +} while (0) + +static ssize_t +show_pwm_reg(struct device *dev, char *buf, int nr) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]); +} + +static ssize_t +store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + if (data->type == w83627thf) { + /* bits 0-3 are reserved in 627THF */ + data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0; + w83627hf_write_value(client, + W836X7HF_REG_PWM(data->type, nr), + data->pwm[nr - 1] | + (w83627hf_read_value(client, + W836X7HF_REG_PWM(data->type, nr)) & 0x0f)); + } else { + data->pwm[nr - 1] = PWM_TO_REG(val); + w83627hf_write_value(client, + W836X7HF_REG_PWM(data->type, nr), + data->pwm[nr - 1]); + } + + up(&data->update_lock); + return count; +} + +#define sysfs_pwm(offset) \ +static ssize_t show_regs_pwm_##offset (struct device *dev, char *buf) \ +{ \ + return show_pwm_reg(dev, buf, offset); \ +} \ +static ssize_t \ +store_regs_pwm_##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_pwm_reg(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_regs_pwm_##offset, store_regs_pwm_##offset); + +sysfs_pwm(1); +sysfs_pwm(2); +sysfs_pwm(3); + +#define device_create_file_pwm(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_pwm##offset); \ +} while (0) + +static ssize_t +show_sensor_reg(struct device *dev, char *buf, int nr) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]); +} + +static ssize_t +store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + u32 val, tmp; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + switch (val) { + case 1: /* PII/Celeron diode */ + tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); + w83627hf_write_value(client, W83781D_REG_SCFG1, + tmp | BIT_SCFG1[nr - 1]); + tmp = w83627hf_read_value(client, W83781D_REG_SCFG2); + w83627hf_write_value(client, W83781D_REG_SCFG2, + tmp | BIT_SCFG2[nr - 1]); + data->sens[nr - 1] = val; + break; + case 2: /* 3904 */ + tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); + w83627hf_write_value(client, W83781D_REG_SCFG1, + tmp | BIT_SCFG1[nr - 1]); + tmp = w83627hf_read_value(client, W83781D_REG_SCFG2); + w83627hf_write_value(client, W83781D_REG_SCFG2, + tmp & ~BIT_SCFG2[nr - 1]); + data->sens[nr - 1] = val; + break; + case W83781D_DEFAULT_BETA: /* thermistor */ + tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); + w83627hf_write_value(client, W83781D_REG_SCFG1, + tmp & ~BIT_SCFG1[nr - 1]); + data->sens[nr - 1] = val; + break; + default: + dev_err(&client->dev, + "Invalid sensor type %ld; must be 1, 2, or %d\n", + (long) val, W83781D_DEFAULT_BETA); + break; + } + + up(&data->update_lock); + return count; +} + +#define sysfs_sensor(offset) \ +static ssize_t show_regs_sensor_##offset (struct device *dev, char *buf) \ +{ \ + return show_sensor_reg(dev, buf, offset); \ +} \ +static ssize_t \ +store_regs_sensor_##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_sensor_reg(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ + show_regs_sensor_##offset, store_regs_sensor_##offset); + +sysfs_sensor(1); +sysfs_sensor(2); +sysfs_sensor(3); + +#define device_create_file_sensor(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_temp##offset##_type); \ +} while (0) + + +/* This function is called when: + * w83627hf_driver is inserted (when this module is loaded), for each + available adapter + * when a new adapter is inserted (and w83627hf_driver is still present) */ +static int w83627hf_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, w83627hf_detect); +} + +static int w83627hf_find(int sioaddr, int *address) +{ + u16 val; + + REG = sioaddr; + VAL = sioaddr + 1; + + superio_enter(); + val= superio_inb(DEVID); + if(val != W627_DEVID && + val != W627THF_DEVID && + val != W697_DEVID && + val != W637_DEVID) { + superio_exit(); + return -ENODEV; + } + + superio_select(W83627HF_LD_HWM); + val = (superio_inb(WINB_BASE_REG) << 8) | + superio_inb(WINB_BASE_REG + 1); + *address = val & ~(WINB_EXTENT - 1); + if (*address == 0 && force_addr == 0) { + superio_exit(); + return -ENODEV; + } + if (force_addr) + *address = force_addr; /* so detect will get called */ + + superio_exit(); + return 0; +} + +int w83627hf_detect(struct i2c_adapter *adapter, int address, + int kind) +{ + int val; + struct i2c_client *new_client; + struct w83627hf_data *data; + int err = 0; + const char *client_name = ""; + + if (!i2c_is_isa_adapter(adapter)) { + err = -ENODEV; + goto ERROR0; + } + + if(force_addr) + address = force_addr & ~(WINB_EXTENT - 1); + + if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) { + err = -EBUSY; + goto ERROR0; + } + + if(force_addr) { + printk("w83627hf.o: forcing ISA address 0x%04X\n", address); + superio_enter(); + superio_select(W83627HF_LD_HWM); + superio_outb(WINB_BASE_REG, address >> 8); + superio_outb(WINB_BASE_REG+1, address & 0xff); + superio_exit(); + } + + superio_enter(); + val= superio_inb(DEVID); + if(val == W627_DEVID) + kind = w83627hf; + else if(val == W697_DEVID) + kind = w83697hf; + else if(val == W627THF_DEVID) + kind = w83627thf; + else if(val == W637_DEVID) + kind = w83637hf; + else { + dev_info(&adapter->dev, + "Unsupported chip (dev_id=0x%02X).\n", val); + goto ERROR1; + } + + superio_select(W83627HF_LD_HWM); + if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0) + superio_outb(WINB_ACT_REG, 1); + superio_exit(); + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access w83627hf_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR1; + } + memset(data, 0, sizeof(struct w83627hf_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + init_MUTEX(&data->lock); + new_client->adapter = adapter; + new_client->driver = &w83627hf_driver; + new_client->flags = 0; + + + if (kind == w83627hf) { + client_name = "w83627hf"; + } else if (kind == w83627thf) { + client_name = "w83627thf"; + } else if (kind == w83697hf) { + client_name = "w83697hf"; + } else if (kind == w83637hf) { + client_name = "w83637hf"; + } + + /* Fill in the remaining client fields and put into the global list */ + strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + data->type = kind; + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR2; + + data->lm75 = NULL; + + /* Initialize the chip */ + w83627hf_init_client(new_client); + + /* A few vars need to be filled upon startup */ + data->fan_min[0] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(1)); + data->fan_min[1] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(2)); + data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3)); + + /* Register sysfs hooks */ + device_create_file_in(new_client, 0); + if (kind != w83697hf) + device_create_file_in(new_client, 1); + device_create_file_in(new_client, 2); + device_create_file_in(new_client, 3); + device_create_file_in(new_client, 4); + if (kind != w83627thf && kind != w83637hf) { + device_create_file_in(new_client, 5); + device_create_file_in(new_client, 6); + } + device_create_file_in(new_client, 7); + device_create_file_in(new_client, 8); + + device_create_file_fan(new_client, 1); + device_create_file_fan(new_client, 2); + if (kind != w83697hf) + device_create_file_fan(new_client, 3); + + device_create_file_temp(new_client, 1); + device_create_file_temp(new_client, 2); + if (kind != w83697hf) + device_create_file_temp(new_client, 3); + + if (kind != w83697hf) + device_create_file_vid(new_client); + + if (kind != w83697hf) + device_create_file_vrm(new_client); + + device_create_file_fan_div(new_client, 1); + device_create_file_fan_div(new_client, 2); + if (kind != w83697hf) + device_create_file_fan_div(new_client, 3); + + device_create_file_alarms(new_client); + + device_create_file_beep(new_client); + + device_create_file_pwm(new_client, 1); + device_create_file_pwm(new_client, 2); + if (kind == w83627thf || kind == w83637hf) + device_create_file_pwm(new_client, 3); + + device_create_file_sensor(new_client, 1); + device_create_file_sensor(new_client, 2); + if (kind != w83697hf) + device_create_file_sensor(new_client, 3); + + return 0; + + ERROR2: + kfree(data); + ERROR1: + release_region(address, WINB_EXTENT); + ERROR0: + return err; +} + +static int w83627hf_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + release_region(client->addr, WINB_EXTENT); + kfree(i2c_get_clientdata(client)); + + return 0; +} + + +/* + ISA access must always be locked explicitly! + We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks, + would slow down the W83781D access and should not be necessary. + There are some ugly typecasts here, but the good news is - they should + nowhere else be necessary! */ +static int w83627hf_read_value(struct i2c_client *client, u16 reg) +{ + struct w83627hf_data *data = i2c_get_clientdata(client); + int res, word_sized; + + down(&data->lock); + word_sized = (((reg & 0xff00) == 0x100) + || ((reg & 0xff00) == 0x200)) + && (((reg & 0x00ff) == 0x50) + || ((reg & 0x00ff) == 0x53) + || ((reg & 0x00ff) == 0x55)); + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(reg >> 8, + client->addr + W83781D_DATA_REG_OFFSET); + } + outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); + res = inb_p(client->addr + W83781D_DATA_REG_OFFSET); + if (word_sized) { + outb_p((reg & 0xff) + 1, + client->addr + W83781D_ADDR_REG_OFFSET); + res = + (res << 8) + inb_p(client->addr + + W83781D_DATA_REG_OFFSET); + } + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); + } + up(&data->lock); + return res; +} + +static int w83627thf_read_gpio5(struct i2c_client *client) +{ + int res = 0xff, sel; + + superio_enter(); + superio_select(W83627HF_LD_GPIO5); + + /* Make sure these GPIO pins are enabled */ + if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) { + dev_dbg(&client->dev, "GPIO5 disabled, no VID function\n"); + goto exit; + } + + /* Make sure the pins are configured for input + There must be at least five (VRM 9), and possibly 6 (VRM 10) */ + sel = superio_inb(W83627THF_GPIO5_IOSR); + if ((sel & 0x1f) != 0x1f) { + dev_dbg(&client->dev, "GPIO5 not configured for VID " + "function\n"); + goto exit; + } + + dev_info(&client->dev, "Reading VID from GPIO5\n"); + res = superio_inb(W83627THF_GPIO5_DR) & sel; + +exit: + superio_exit(); + return res; +} + +static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value) +{ + struct w83627hf_data *data = i2c_get_clientdata(client); + int word_sized; + + down(&data->lock); + word_sized = (((reg & 0xff00) == 0x100) + || ((reg & 0xff00) == 0x200)) + && (((reg & 0x00ff) == 0x53) + || ((reg & 0x00ff) == 0x55)); + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(reg >> 8, + client->addr + W83781D_DATA_REG_OFFSET); + } + outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); + if (word_sized) { + outb_p(value >> 8, + client->addr + W83781D_DATA_REG_OFFSET); + outb_p((reg & 0xff) + 1, + client->addr + W83781D_ADDR_REG_OFFSET); + } + outb_p(value & 0xff, + client->addr + W83781D_DATA_REG_OFFSET); + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); + } + up(&data->lock); + return 0; +} + +/* Called when we have found a new W83781D. It should set limits, etc. */ +static void w83627hf_init_client(struct i2c_client *client) +{ + struct w83627hf_data *data = i2c_get_clientdata(client); + int i; + int type = data->type; + u8 tmp; + + if(init) { + /* save this register */ + i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG); + /* Reset all except Watchdog values and last conversion values + This sets fan-divs to 2, among others */ + w83627hf_write_value(client, W83781D_REG_CONFIG, 0x80); + /* Restore the register and disable power-on abnormal beep. + This saves FAN 1/2/3 input/output values set by BIOS. */ + w83627hf_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80); + /* Disable master beep-enable (reset turns it on). + Individual beeps should be reset to off but for some reason + disabling this bit helps some people not get beeped */ + w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, 0); + } + + /* Minimize conflicts with other winbond i2c-only clients... */ + /* disable i2c subclients... how to disable main i2c client?? */ + /* force i2c address to relatively uncommon address */ + w83627hf_write_value(client, W83781D_REG_I2C_SUBADDR, 0x89); + w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c); + + /* Read VID only once */ + if (w83627hf == data->type || w83637hf == data->type) { + int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV); + int hi = w83627hf_read_value(client, W83781D_REG_CHIPID); + data->vid = (lo & 0x0f) | ((hi & 0x01) << 4); + } else if (w83627thf == data->type) { + data->vid = w83627thf_read_gpio5(client) & 0x3f; + } + + /* Read VRM & OVT Config only once */ + if (w83627thf == data->type || w83637hf == data->type) { + data->vrm_ovt = + w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG); + data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82; + } else { + /* Convert VID to voltage based on default VRM */ + data->vrm = i2c_which_vrm(); + } + + tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); + for (i = 1; i <= 3; i++) { + if (!(tmp & BIT_SCFG1[i - 1])) { + data->sens[i - 1] = W83781D_DEFAULT_BETA; + } else { + if (w83627hf_read_value + (client, + W83781D_REG_SCFG2) & BIT_SCFG2[i - 1]) + data->sens[i - 1] = 1; + else + data->sens[i - 1] = 2; + } + if ((type == w83697hf) && (i == 2)) + break; + } + + if(init) { + /* Enable temp2 */ + tmp = w83627hf_read_value(client, W83781D_REG_TEMP2_CONFIG); + if (tmp & 0x01) { + dev_warn(&client->dev, "Enabling temp2, readings " + "might not make sense\n"); + w83627hf_write_value(client, W83781D_REG_TEMP2_CONFIG, + tmp & 0xfe); + } + + /* Enable temp3 */ + if (type != w83697hf) { + tmp = w83627hf_read_value(client, + W83781D_REG_TEMP3_CONFIG); + if (tmp & 0x01) { + dev_warn(&client->dev, "Enabling temp3, " + "readings might not make sense\n"); + w83627hf_write_value(client, + W83781D_REG_TEMP3_CONFIG, tmp & 0xfe); + } + } + + if (type == w83627hf) { + /* enable PWM2 control (can't hurt since PWM reg + should have been reset to 0xff) */ + w83627hf_write_value(client, W83627HF_REG_PWMCLK12, + 0x19); + } + /* enable comparator mode for temp2 and temp3 so + alarm indication will work correctly */ + i = w83627hf_read_value(client, W83781D_REG_IRQ); + if (!(i & 0x40)) + w83627hf_write_value(client, W83781D_REG_IRQ, + i | 0x40); + } + + /* Start monitoring */ + w83627hf_write_value(client, W83781D_REG_CONFIG, + (w83627hf_read_value(client, + W83781D_REG_CONFIG) & 0xf7) + | 0x01); +} + +static struct w83627hf_data *w83627hf_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627hf_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + for (i = 0; i <= 8; i++) { + /* skip missing sensors */ + if (((data->type == w83697hf) && (i == 1)) || + ((data->type == w83627thf || data->type == w83637hf) + && (i == 4 || i == 5))) + continue; + data->in[i] = + w83627hf_read_value(client, W83781D_REG_IN(i)); + data->in_min[i] = + w83627hf_read_value(client, + W83781D_REG_IN_MIN(i)); + data->in_max[i] = + w83627hf_read_value(client, + W83781D_REG_IN_MAX(i)); + } + for (i = 1; i <= 3; i++) { + data->fan[i - 1] = + w83627hf_read_value(client, W83781D_REG_FAN(i)); + data->fan_min[i - 1] = + w83627hf_read_value(client, + W83781D_REG_FAN_MIN(i)); + } + for (i = 1; i <= 3; i++) { + u8 tmp = w83627hf_read_value(client, + W836X7HF_REG_PWM(data->type, i)); + /* bits 0-3 are reserved in 627THF */ + if (data->type == w83627thf) + tmp &= 0xf0; + data->pwm[i - 1] = tmp; + if(i == 2 && + (data->type == w83627hf || data->type == w83697hf)) + break; + } + + data->temp = w83627hf_read_value(client, W83781D_REG_TEMP(1)); + data->temp_max = + w83627hf_read_value(client, W83781D_REG_TEMP_OVER(1)); + data->temp_max_hyst = + w83627hf_read_value(client, W83781D_REG_TEMP_HYST(1)); + data->temp_add[0] = + w83627hf_read_value(client, W83781D_REG_TEMP(2)); + data->temp_max_add[0] = + w83627hf_read_value(client, W83781D_REG_TEMP_OVER(2)); + data->temp_max_hyst_add[0] = + w83627hf_read_value(client, W83781D_REG_TEMP_HYST(2)); + if (data->type != w83697hf) { + data->temp_add[1] = + w83627hf_read_value(client, W83781D_REG_TEMP(3)); + data->temp_max_add[1] = + w83627hf_read_value(client, W83781D_REG_TEMP_OVER(3)); + data->temp_max_hyst_add[1] = + w83627hf_read_value(client, W83781D_REG_TEMP_HYST(3)); + } + + i = w83627hf_read_value(client, W83781D_REG_VID_FANDIV); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = (i >> 6) & 0x03; + if (data->type != w83697hf) { + data->fan_div[2] = (w83627hf_read_value(client, + W83781D_REG_PIN) >> 6) & 0x03; + } + i = w83627hf_read_value(client, W83781D_REG_VBAT); + data->fan_div[0] |= (i >> 3) & 0x04; + data->fan_div[1] |= (i >> 4) & 0x04; + if (data->type != w83697hf) + data->fan_div[2] |= (i >> 5) & 0x04; + data->alarms = + w83627hf_read_value(client, W83781D_REG_ALARM1) | + (w83627hf_read_value(client, W83781D_REG_ALARM2) << 8) | + (w83627hf_read_value(client, W83781D_REG_ALARM3) << 16); + i = w83627hf_read_value(client, W83781D_REG_BEEP_INTS2); + data->beep_enable = i >> 7; + data->beep_mask = ((i & 0x7f) << 8) | + w83627hf_read_value(client, W83781D_REG_BEEP_INTS1) | + w83627hf_read_value(client, W83781D_REG_BEEP_INTS3) << 16; + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_w83627hf_init(void) +{ + int addr; + + if (w83627hf_find(0x2e, &addr) + && w83627hf_find(0x4e, &addr)) { + return -ENODEV; + } + normal_isa[0] = addr; + + return i2c_add_driver(&w83627hf_driver); +} + +static void __exit sensors_w83627hf_exit(void) +{ + i2c_del_driver(&w83627hf_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "and Mark Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("W83627HF driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83627hf_init); +module_exit(sensors_w83627hf_exit); diff --git a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c new file mode 100644 index 000000000000..4954e465c419 --- /dev/null +++ b/drivers/i2c/chips/w83781d.c @@ -0,0 +1,1664 @@ +/* + w83781d.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + and Mark Studebaker <mdsxyz123@yahoo.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports following chips: + + Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + as99127f 7 3 0 3 0x31 0x12c3 yes no + as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no + w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes + w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) + w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC) + w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes + w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no + w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) + +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> +#include <asm/io.h> +#include "lm75.h" + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, + 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, + 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf); +I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + "{bus, clientaddr, subclientaddr1, subclientaddr2}"); + +static int init = 1; +module_param(init, bool, 0); +MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); + +/* Constants specified below */ + +/* Length of ISA address segment */ +#define W83781D_EXTENT 8 + +/* Where are the ISA address/data registers relative to the base address */ +#define W83781D_ADDR_REG_OFFSET 5 +#define W83781D_DATA_REG_OFFSET 6 + +/* The W83781D registers */ +/* The W83782D registers for nr=7,8 are in bank 5 */ +#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ + (0x554 + (((nr) - 7) * 2))) +#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ + (0x555 + (((nr) - 7) * 2))) +#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ + (0x550 + (nr) - 7)) + +#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr)) +#define W83781D_REG_FAN(nr) (0x27 + (nr)) + +#define W83781D_REG_BANK 0x4E +#define W83781D_REG_TEMP2_CONFIG 0x152 +#define W83781D_REG_TEMP3_CONFIG 0x252 +#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \ + ((nr == 2) ? (0x0150) : \ + (0x27))) +#define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \ + ((nr == 2) ? (0x153) : \ + (0x3A))) +#define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \ + ((nr == 2) ? (0x155) : \ + (0x39))) + +#define W83781D_REG_CONFIG 0x40 +#define W83781D_REG_ALARM1 0x41 +#define W83781D_REG_ALARM2 0x42 +#define W83781D_REG_ALARM3 0x450 /* not on W83781D */ + +#define W83781D_REG_IRQ 0x4C +#define W83781D_REG_BEEP_CONFIG 0x4D +#define W83781D_REG_BEEP_INTS1 0x56 +#define W83781D_REG_BEEP_INTS2 0x57 +#define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */ + +#define W83781D_REG_VID_FANDIV 0x47 + +#define W83781D_REG_CHIPID 0x49 +#define W83781D_REG_WCHIPID 0x58 +#define W83781D_REG_CHIPMAN 0x4F +#define W83781D_REG_PIN 0x4B + +/* 782D/783S only */ +#define W83781D_REG_VBAT 0x5D + +/* PWM 782D (1-4) and 783S (1-2) only */ +#define W83781D_REG_PWM1 0x5B /* 782d and 783s/627hf datasheets disagree */ + /* on which is which; */ +#define W83781D_REG_PWM2 0x5A /* We follow the 782d convention here, */ + /* However 782d is probably wrong. */ +#define W83781D_REG_PWM3 0x5E +#define W83781D_REG_PWM4 0x5F +#define W83781D_REG_PWMCLK12 0x5C +#define W83781D_REG_PWMCLK34 0x45C +static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2, + W83781D_REG_PWM3, W83781D_REG_PWM4 +}; + +#define W83781D_REG_PWM(nr) (regpwm[(nr) - 1]) + +#define W83781D_REG_I2C_ADDR 0x48 +#define W83781D_REG_I2C_SUBADDR 0x4A + +/* The following are undocumented in the data sheets however we + received the information in an email from Winbond tech support */ +/* Sensor selection - not on 781d */ +#define W83781D_REG_SCFG1 0x5D +static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 }; + +#define W83781D_REG_SCFG2 0x59 +static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 }; + +#define W83781D_DEFAULT_BETA 3435 + +/* RT Table registers */ +#define W83781D_REG_RT_IDX 0x50 +#define W83781D_REG_RT_VAL 0x51 + +/* Conversions. Rounding and limit checking is only done on the TO_REG + variants. Note that you should be a bit careful with which arguments + these macros are called: arguments may be evaluated more than once. + Fixing this is just not worth it. */ +#define IN_TO_REG(val) (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255)) +#define IN_FROM_REG(val) (((val) * 16) / 10) + +static inline u8 +FAN_TO_REG(long rpm, int div) +{ + if (rpm == 0) + return 255; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ + ((val) == 255 ? 0 : \ + 1350000 / ((val) * (div)))) + +#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ + : (val)) / 1000, 0, 0xff)) +#define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) + +#define ALARMS_FROM_REG(val) (val) +#define PWM_FROM_REG(val) (val) +#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255)) +#define BEEP_MASK_FROM_REG(val,type) ((type) == as99127f ? \ + (val) ^ 0x7fff : (val)) +#define BEEP_MASK_TO_REG(val,type) ((type) == as99127f ? \ + (~(val)) & 0x7fff : (val) & 0xffffff) + +#define BEEP_ENABLE_TO_REG(val) ((val) ? 1 : 0) +#define BEEP_ENABLE_FROM_REG(val) ((val) ? 1 : 0) + +#define DIV_FROM_REG(val) (1 << (val)) + +static inline u8 +DIV_TO_REG(long val, enum chips type) +{ + int i; + val = SENSORS_LIMIT(val, 1, + ((type == w83781d + || type == as99127f) ? 8 : 128)) >> 1; + for (i = 0; i < 6; i++) { + if (val == 0) + break; + val >>= 1; + } + return ((u8) i); +} + +/* There are some complications in a module like this. First off, W83781D chips + may be both present on the SMBus and the ISA bus, and we have to handle + those cases separately at some places. Second, there might be several + W83781D chips available (well, actually, that is probably never done; but + it is a clean illustration of how to handle a case like that). Finally, + a specific chip may be attached to *both* ISA and SMBus, and we would + not like to detect it double. Fortunately, in the case of the W83781D at + least, a register tells us what SMBus address we are on, so that helps + a bit - except if there could be more than one SMBus. Groan. No solution + for this yet. */ + +/* This module may seem overly long and complicated. In fact, it is not so + bad. Quite a lot of bookkeeping is done. A real driver can often cut + some corners. */ + +/* For each registered W83781D, we need to keep some data in memory. That + data is pointed to by w83781d_list[NR]->data. The structure itself is + dynamically allocated, at the same time when a new w83781d client is + allocated. */ +struct w83781d_data { + struct i2c_client client; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + struct i2c_client *lm75[2]; /* for secondary I2C addresses */ + /* array of 2 pointers to subclients */ + + u8 in[9]; /* Register value - 8 & 9 for 782D only */ + u8 in_max[9]; /* Register value - 8 & 9 for 782D only */ + u8 in_min[9]; /* Register value - 8 & 9 for 782D only */ + u8 fan[3]; /* Register value */ + u8 fan_min[3]; /* Register value */ + u8 temp; + u8 temp_max; /* Register value */ + u8 temp_max_hyst; /* Register value */ + u16 temp_add[2]; /* Register value */ + u16 temp_max_add[2]; /* Register value */ + u16 temp_max_hyst_add[2]; /* Register value */ + u8 fan_div[3]; /* Register encoding, shifted right */ + u8 vid; /* Register encoding, combined */ + u32 alarms; /* Register encoding, combined */ + u32 beep_mask; /* Register encoding, combined */ + u8 beep_enable; /* Boolean */ + u8 pwm[4]; /* Register value */ + u8 pwmenable[4]; /* Boolean */ + u16 sens[3]; /* 782D/783S only. + 1 = pentium diode; 2 = 3904 diode; + 3000-5000 = thermistor beta. + Default = 3435. + Other Betas unimplemented */ + u8 vrm; +}; + +static int w83781d_attach_adapter(struct i2c_adapter *adapter); +static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind); +static int w83781d_detach_client(struct i2c_client *client); + +static int w83781d_read_value(struct i2c_client *client, u16 register); +static int w83781d_write_value(struct i2c_client *client, u16 register, + u16 value); +static struct w83781d_data *w83781d_update_device(struct device *dev); +static void w83781d_init_client(struct i2c_client *client); + +static struct i2c_driver w83781d_driver = { + .owner = THIS_MODULE, + .name = "w83781d", + .id = I2C_DRIVERID_W83781D, + .flags = I2C_DF_NOTIFY, + .attach_adapter = w83781d_attach_adapter, + .detach_client = w83781d_detach_client, +}; + +/* following are the sysfs callback functions */ +#define show_in_reg(reg) \ +static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct w83781d_data *data = w83781d_update_device(dev); \ + return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \ +} +show_in_reg(in); +show_in_reg(in_min); +show_in_reg(in_max); + +#define store_in_reg(REG, reg) \ +static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83781d_data *data = i2c_get_clientdata(client); \ + u32 val; \ + \ + val = simple_strtoul(buf, NULL, 10) / 10; \ + \ + down(&data->update_lock); \ + data->in_##reg[nr] = IN_TO_REG(val); \ + w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \ + \ + up(&data->update_lock); \ + return count; \ +} +store_in_reg(MIN, min); +store_in_reg(MAX, max); + +#define sysfs_in_offset(offset) \ +static ssize_t \ +show_regs_in_##offset (struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL); + +#define sysfs_in_reg_offset(reg, offset) \ +static ssize_t show_regs_in_##reg##offset (struct device *dev, char *buf) \ +{ \ + return show_in_##reg (dev, buf, offset); \ +} \ +static ssize_t store_regs_in_##reg##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_in_##reg (dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset); + +#define sysfs_in_offsets(offset) \ +sysfs_in_offset(offset); \ +sysfs_in_reg_offset(min, offset); \ +sysfs_in_reg_offset(max, offset); + +sysfs_in_offsets(0); +sysfs_in_offsets(1); +sysfs_in_offsets(2); +sysfs_in_offsets(3); +sysfs_in_offsets(4); +sysfs_in_offsets(5); +sysfs_in_offsets(6); +sysfs_in_offsets(7); +sysfs_in_offsets(8); + +#define device_create_file_in(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_in##offset##_input); \ +device_create_file(&client->dev, &dev_attr_in##offset##_min); \ +device_create_file(&client->dev, &dev_attr_in##offset##_max); \ +} while (0) + +#define show_fan_reg(reg) \ +static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct w83781d_data *data = w83781d_update_device(dev); \ + return sprintf(buf,"%ld\n", \ + FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \ +} +show_fan_reg(fan); +show_fan_reg(fan_min); + +static ssize_t +store_fan_min(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr - 1] = + FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1])); + w83781d_write_value(client, W83781D_REG_FAN_MIN(nr), + data->fan_min[nr - 1]); + + up(&data->update_lock); + return count; +} + +#define sysfs_fan_offset(offset) \ +static ssize_t show_regs_fan_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL); + +#define sysfs_fan_min_offset(offset) \ +static ssize_t show_regs_fan_min##offset (struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset); \ +} \ +static ssize_t store_regs_fan_min##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_fan_min(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset); + +sysfs_fan_offset(1); +sysfs_fan_min_offset(1); +sysfs_fan_offset(2); +sysfs_fan_min_offset(2); +sysfs_fan_offset(3); +sysfs_fan_min_offset(3); + +#define device_create_file_fan(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ +device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ +} while (0) + +#define show_temp_reg(reg) \ +static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct w83781d_data *data = w83781d_update_device(dev); \ + if (nr >= 2) { /* TEMP2 and TEMP3 */ \ + return sprintf(buf,"%d\n", \ + LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \ + } else { /* TEMP1 */ \ + return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \ + } \ +} +show_temp_reg(temp); +show_temp_reg(temp_max); +show_temp_reg(temp_max_hyst); + +#define store_temp_reg(REG, reg) \ +static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83781d_data *data = i2c_get_clientdata(client); \ + s32 val; \ + \ + val = simple_strtol(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + \ + if (nr >= 2) { /* TEMP2 and TEMP3 */ \ + data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \ + w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \ + data->temp_##reg##_add[nr-2]); \ + } else { /* TEMP1 */ \ + data->temp_##reg = TEMP_TO_REG(val); \ + w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \ + data->temp_##reg); \ + } \ + \ + up(&data->update_lock); \ + return count; \ +} +store_temp_reg(OVER, max); +store_temp_reg(HYST, max_hyst); + +#define sysfs_temp_offset(offset) \ +static ssize_t \ +show_regs_temp_##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL); + +#define sysfs_temp_reg_offset(reg, offset) \ +static ssize_t show_regs_temp_##reg##offset (struct device *dev, char *buf) \ +{ \ + return show_temp_##reg (dev, buf, offset); \ +} \ +static ssize_t store_regs_temp_##reg##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_temp_##reg (dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset); + +#define sysfs_temp_offsets(offset) \ +sysfs_temp_offset(offset); \ +sysfs_temp_reg_offset(max, offset); \ +sysfs_temp_reg_offset(max_hyst, offset); + +sysfs_temp_offsets(1); +sysfs_temp_offsets(2); +sysfs_temp_offsets(3); + +#define device_create_file_temp(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ +device_create_file(&client->dev, &dev_attr_temp##offset##_max); \ +device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \ +} while (0) + +static ssize_t +show_vid_reg(struct device *dev, char *buf) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); +} + +static +DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); +#define device_create_file_vid(client) \ +device_create_file(&client->dev, &dev_attr_cpu0_vid); +static ssize_t +show_vrm_reg(struct device *dev, char *buf) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->vrm); +} + +static ssize_t +store_vrm_reg(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + data->vrm = val; + + return count; +} + +static +DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); +#define device_create_file_vrm(client) \ +device_create_file(&client->dev, &dev_attr_vrm); +static ssize_t +show_alarms_reg(struct device *dev, char *buf) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms)); +} + +static +DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); +#define device_create_file_alarms(client) \ +device_create_file(&client->dev, &dev_attr_alarms); +static ssize_t show_beep_mask (struct device *dev, char *buf) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", + (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type)); +} +static ssize_t show_beep_enable (struct device *dev, char *buf) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", + (long)BEEP_ENABLE_FROM_REG(data->beep_enable)); +} + +#define BEEP_ENABLE 0 /* Store beep_enable */ +#define BEEP_MASK 1 /* Store beep_mask */ + +static ssize_t +store_beep_reg(struct device *dev, const char *buf, size_t count, + int update_mask) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + u32 val, val2; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + if (update_mask == BEEP_MASK) { /* We are storing beep_mask */ + data->beep_mask = BEEP_MASK_TO_REG(val, data->type); + w83781d_write_value(client, W83781D_REG_BEEP_INTS1, + data->beep_mask & 0xff); + + if ((data->type != w83781d) && (data->type != as99127f)) { + w83781d_write_value(client, W83781D_REG_BEEP_INTS3, + ((data->beep_mask) >> 16) & 0xff); + } + + val2 = (data->beep_mask >> 8) & 0x7f; + } else { /* We are storing beep_enable */ + val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f; + data->beep_enable = BEEP_ENABLE_TO_REG(val); + } + + w83781d_write_value(client, W83781D_REG_BEEP_INTS2, + val2 | data->beep_enable << 7); + + up(&data->update_lock); + return count; +} + +#define sysfs_beep(REG, reg) \ +static ssize_t show_regs_beep_##reg (struct device *dev, char *buf) \ +{ \ + return show_beep_##reg(dev, buf); \ +} \ +static ssize_t store_regs_beep_##reg (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_beep_reg(dev, buf, count, BEEP_##REG); \ +} \ +static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg); + +sysfs_beep(ENABLE, enable); +sysfs_beep(MASK, mask); + +#define device_create_file_beep(client) \ +do { \ +device_create_file(&client->dev, &dev_attr_beep_enable); \ +device_create_file(&client->dev, &dev_attr_beep_mask); \ +} while (0) + +static ssize_t +show_fan_div_reg(struct device *dev, char *buf, int nr) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", + (long) DIV_FROM_REG(data->fan_div[nr - 1])); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least suprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t +store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + unsigned long min; + u8 reg; + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + /* Save fan_min */ + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + + data->fan_div[nr] = DIV_TO_REG(val, data->type); + + reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV) + & (nr==0 ? 0xcf : 0x3f)) + | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6)); + w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg); + + /* w83781d and as99127f don't have extended divisor bits */ + if (data->type != w83781d && data->type != as99127f) { + reg = (w83781d_read_value(client, W83781D_REG_VBAT) + & ~(1 << (5 + nr))) + | ((data->fan_div[nr] & 0x04) << (3 + nr)); + w83781d_write_value(client, W83781D_REG_VBAT, reg); + } + + /* Restore fan_min */ + data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]); + + up(&data->update_lock); + return count; +} + +#define sysfs_fan_div(offset) \ +static ssize_t show_regs_fan_div_##offset (struct device *dev, char *buf) \ +{ \ + return show_fan_div_reg(dev, buf, offset); \ +} \ +static ssize_t store_regs_fan_div_##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_fan_div_reg(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset); + +sysfs_fan_div(1); +sysfs_fan_div(2); +sysfs_fan_div(3); + +#define device_create_file_fan_div(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ +} while (0) + +static ssize_t +show_pwm_reg(struct device *dev, char *buf, int nr) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1])); +} + +static ssize_t +show_pwmenable_reg(struct device *dev, char *buf, int nr) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]); +} + +static ssize_t +store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->pwm[nr - 1] = PWM_TO_REG(val); + w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]); + up(&data->update_lock); + return count; +} + +static ssize_t +store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + u32 val, reg; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + switch (val) { + case 0: + case 1: + reg = w83781d_read_value(client, W83781D_REG_PWMCLK12); + w83781d_write_value(client, W83781D_REG_PWMCLK12, + (reg & 0xf7) | (val << 3)); + + reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); + w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, + (reg & 0xef) | (!val << 4)); + + data->pwmenable[nr - 1] = val; + break; + + default: + up(&data->update_lock); + return -EINVAL; + } + + up(&data->update_lock); + return count; +} + +#define sysfs_pwm(offset) \ +static ssize_t show_regs_pwm_##offset (struct device *dev, char *buf) \ +{ \ + return show_pwm_reg(dev, buf, offset); \ +} \ +static ssize_t store_regs_pwm_##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return store_pwm_reg(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_regs_pwm_##offset, store_regs_pwm_##offset); + +#define sysfs_pwmenable(offset) \ +static ssize_t show_regs_pwmenable_##offset (struct device *dev, char *buf) \ +{ \ + return show_pwmenable_reg(dev, buf, offset); \ +} \ +static ssize_t store_regs_pwmenable_##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return store_pwmenable_reg(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + show_regs_pwmenable_##offset, store_regs_pwmenable_##offset); + +sysfs_pwm(1); +sysfs_pwm(2); +sysfs_pwmenable(2); /* only PWM2 can be enabled/disabled */ +sysfs_pwm(3); +sysfs_pwm(4); + +#define device_create_file_pwm(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_pwm##offset); \ +} while (0) + +#define device_create_file_pwmenable(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \ +} while (0) + +static ssize_t +show_sensor_reg(struct device *dev, char *buf, int nr) +{ + struct w83781d_data *data = w83781d_update_device(dev); + return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]); +} + +static ssize_t +store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + u32 val, tmp; + + val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + + switch (val) { + case 1: /* PII/Celeron diode */ + tmp = w83781d_read_value(client, W83781D_REG_SCFG1); + w83781d_write_value(client, W83781D_REG_SCFG1, + tmp | BIT_SCFG1[nr - 1]); + tmp = w83781d_read_value(client, W83781D_REG_SCFG2); + w83781d_write_value(client, W83781D_REG_SCFG2, + tmp | BIT_SCFG2[nr - 1]); + data->sens[nr - 1] = val; + break; + case 2: /* 3904 */ + tmp = w83781d_read_value(client, W83781D_REG_SCFG1); + w83781d_write_value(client, W83781D_REG_SCFG1, + tmp | BIT_SCFG1[nr - 1]); + tmp = w83781d_read_value(client, W83781D_REG_SCFG2); + w83781d_write_value(client, W83781D_REG_SCFG2, + tmp & ~BIT_SCFG2[nr - 1]); + data->sens[nr - 1] = val; + break; + case W83781D_DEFAULT_BETA: /* thermistor */ + tmp = w83781d_read_value(client, W83781D_REG_SCFG1); + w83781d_write_value(client, W83781D_REG_SCFG1, + tmp & ~BIT_SCFG1[nr - 1]); + data->sens[nr - 1] = val; + break; + default: + dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n", + (long) val, W83781D_DEFAULT_BETA); + break; + } + + up(&data->update_lock); + return count; +} + +#define sysfs_sensor(offset) \ +static ssize_t show_regs_sensor_##offset (struct device *dev, char *buf) \ +{ \ + return show_sensor_reg(dev, buf, offset); \ +} \ +static ssize_t store_regs_sensor_##offset (struct device *dev, const char *buf, size_t count) \ +{ \ + return store_sensor_reg(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset); + +sysfs_sensor(1); +sysfs_sensor(2); +sysfs_sensor(3); + +#define device_create_file_sensor(client, offset) \ +do { \ +device_create_file(&client->dev, &dev_attr_temp##offset##_type); \ +} while (0) + +/* This function is called when: + * w83781d_driver is inserted (when this module is loaded), for each + available adapter + * when a new adapter is inserted (and w83781d_driver is still present) */ +static int +w83781d_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, w83781d_detect); +} + +/* Assumes that adapter is of I2C, not ISA variety. + * OTHERWISE DON'T CALL THIS + */ +static int +w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, + struct i2c_client *new_client) +{ + int i, val1 = 0, id; + int err; + const char *client_name = ""; + struct w83781d_data *data = i2c_get_clientdata(new_client); + + data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!(data->lm75[0])) { + err = -ENOMEM; + goto ERROR_SC_0; + } + memset(data->lm75[0], 0x00, sizeof (struct i2c_client)); + + id = i2c_adapter_id(adapter); + + if (force_subclients[0] == id && force_subclients[1] == address) { + for (i = 2; i <= 3; i++) { + if (force_subclients[i] < 0x48 || + force_subclients[i] > 0x4f) { + dev_err(&new_client->dev, "Invalid subclient " + "address %d; must be 0x48-0x4f\n", + force_subclients[i]); + err = -EINVAL; + goto ERROR_SC_1; + } + } + w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR, + (force_subclients[2] & 0x07) | + ((force_subclients[3] & 0x07) << 4)); + data->lm75[0]->addr = force_subclients[2]; + } else { + val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR); + data->lm75[0]->addr = 0x48 + (val1 & 0x07); + } + + if (kind != w83783s) { + + data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!(data->lm75[1])) { + err = -ENOMEM; + goto ERROR_SC_1; + } + memset(data->lm75[1], 0x0, sizeof(struct i2c_client)); + + if (force_subclients[0] == id && + force_subclients[1] == address) { + data->lm75[1]->addr = force_subclients[3]; + } else { + data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07); + } + if (data->lm75[0]->addr == data->lm75[1]->addr) { + dev_err(&new_client->dev, + "Duplicate addresses 0x%x for subclients.\n", + data->lm75[0]->addr); + err = -EBUSY; + goto ERROR_SC_2; + } + } + + if (kind == w83781d) + client_name = "w83781d subclient"; + else if (kind == w83782d) + client_name = "w83782d subclient"; + else if (kind == w83783s) + client_name = "w83783s subclient"; + else if (kind == w83627hf) + client_name = "w83627hf subclient"; + else if (kind == as99127f) + client_name = "as99127f subclient"; + + for (i = 0; i <= 1; i++) { + /* store all data in w83781d */ + i2c_set_clientdata(data->lm75[i], NULL); + data->lm75[i]->adapter = adapter; + data->lm75[i]->driver = &w83781d_driver; + data->lm75[i]->flags = 0; + strlcpy(data->lm75[i]->name, client_name, + I2C_NAME_SIZE); + if ((err = i2c_attach_client(data->lm75[i]))) { + dev_err(&new_client->dev, "Subclient %d " + "registration at address 0x%x " + "failed.\n", i, data->lm75[i]->addr); + if (i == 1) + goto ERROR_SC_3; + goto ERROR_SC_2; + } + if (kind == w83783s) + break; + } + + return 0; + +/* Undo inits in case of errors */ +ERROR_SC_3: + i2c_detach_client(data->lm75[0]); +ERROR_SC_2: + if (NULL != data->lm75[1]) + kfree(data->lm75[1]); +ERROR_SC_1: + if (NULL != data->lm75[0]) + kfree(data->lm75[0]); +ERROR_SC_0: + return err; +} + +static int +w83781d_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i = 0, val1 = 0, val2; + struct i2c_client *new_client; + struct w83781d_data *data; + int err; + const char *client_name = ""; + int is_isa = i2c_is_isa_adapter(adapter); + enum vendor { winbond, asus } vendid; + + if (!is_isa + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + err = -EINVAL; + goto ERROR0; + } + + /* Prevent users from forcing a kind for a bus it isn't supposed + to possibly be on */ + if (is_isa && (kind == as99127f || kind == w83783s)) { + dev_err(&adapter->dev, + "Cannot force I2C-only chip for ISA address 0x%02x.\n", + address); + err = -EINVAL; + goto ERROR0; + } + if (!is_isa && kind == w83697hf) { + dev_err(&adapter->dev, + "Cannot force ISA-only chip for I2C address 0x%02x.\n", + address); + err = -EINVAL; + goto ERROR0; + } + + if (is_isa) + if (!request_region(address, W83781D_EXTENT, + w83781d_driver.name)) { + dev_dbg(&adapter->dev, "Request of region " + "0x%x-0x%x for w83781d failed\n", address, + address + W83781D_EXTENT - 1); + err = -EBUSY; + goto ERROR0; + } + + /* Probe whether there is anything available on this address. Already + done for SMBus clients */ + if (kind < 0) { + if (is_isa) { + +#define REALLY_SLOW_IO + /* We need the timeouts for at least some LM78-like + chips. But only if we read 'undefined' registers. */ + i = inb_p(address + 1); + if (inb_p(address + 2) != i + || inb_p(address + 3) != i + || inb_p(address + 7) != i) { + dev_dbg(&adapter->dev, "Detection of w83781d " + "chip failed at step 1\n"); + err = -ENODEV; + goto ERROR1; + } +#undef REALLY_SLOW_IO + + /* Let's just hope nothing breaks here */ + i = inb_p(address + 5) & 0x7f; + outb_p(~i & 0x7f, address + 5); + val2 = inb_p(address + 5) & 0x7f; + if (val2 != (~i & 0x7f)) { + outb_p(i, address + 5); + dev_dbg(&adapter->dev, "Detection of w83781d " + "chip failed at step 2 (0x%x != " + "0x%x at 0x%x)\n", val2, ~i & 0x7f, + address + 5); + err = -ENODEV; + goto ERROR1; + } + } + } + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access w83781d_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR1; + } + memset(data, 0, sizeof(struct w83781d_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + init_MUTEX(&data->lock); + new_client->adapter = adapter; + new_client->driver = &w83781d_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + + /* The w8378?d may be stuck in some other bank than bank 0. This may + make reading other information impossible. Specify a force=... or + force_*=... parameter, and the Winbond will be reset to the right + bank. */ + if (kind < 0) { + if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) { + dev_dbg(&new_client->dev, "Detection failed at step " + "3\n"); + err = -ENODEV; + goto ERROR2; + } + val1 = w83781d_read_value(new_client, W83781D_REG_BANK); + val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN); + /* Check for Winbond or Asus ID if in bank 0 */ + if ((!(val1 & 0x07)) && + (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3)) + || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) { + dev_dbg(&new_client->dev, "Detection failed at step " + "4\n"); + err = -ENODEV; + goto ERROR2; + } + /* If Winbond SMBus, check address at 0x48. + Asus doesn't support, except for as99127f rev.2 */ + if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) || + ((val1 & 0x80) && (val2 == 0x5c)))) { + if (w83781d_read_value + (new_client, W83781D_REG_I2C_ADDR) != address) { + dev_dbg(&new_client->dev, "Detection failed " + "at step 5\n"); + err = -ENODEV; + goto ERROR2; + } + } + } + + /* We have either had a force parameter, or we have already detected the + Winbond. Put it now into bank 0 and Vendor ID High Byte */ + w83781d_write_value(new_client, W83781D_REG_BANK, + (w83781d_read_value(new_client, + W83781D_REG_BANK) & 0x78) | + 0x80); + + /* Determine the chip type. */ + if (kind <= 0) { + /* get vendor ID */ + val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN); + if (val2 == 0x5c) + vendid = winbond; + else if (val2 == 0x12) + vendid = asus; + else { + dev_dbg(&new_client->dev, "Chip was made by neither " + "Winbond nor Asus?\n"); + err = -ENODEV; + goto ERROR2; + } + + val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID); + if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond) + kind = w83781d; + else if (val1 == 0x30 && vendid == winbond) + kind = w83782d; + else if (val1 == 0x40 && vendid == winbond && !is_isa + && address == 0x2d) + kind = w83783s; + else if ((val1 == 0x21 || val1 == 0x90) && vendid == winbond) + kind = w83627hf; + else if (val1 == 0x31 && !is_isa && address >= 0x28) + kind = as99127f; + else if (val1 == 0x60 && vendid == winbond && is_isa) + kind = w83697hf; + else { + if (kind == 0) + dev_warn(&new_client->dev, "Ignoring 'force' " + "parameter for unknown chip at " + "adapter %d, address 0x%02x\n", + i2c_adapter_id(adapter), address); + err = -EINVAL; + goto ERROR2; + } + } + + if (kind == w83781d) { + client_name = "w83781d"; + } else if (kind == w83782d) { + client_name = "w83782d"; + } else if (kind == w83783s) { + client_name = "w83783s"; + } else if (kind == w83627hf) { + if (val1 == 0x90) + client_name = "w83627thf"; + else + client_name = "w83627hf"; + } else if (kind == as99127f) { + client_name = "as99127f"; + } else if (kind == w83697hf) { + client_name = "w83697hf"; + } + + /* Fill in the remaining client fields and put into the global list */ + strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + data->type = kind; + + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR2; + + /* attach secondary i2c lm75-like clients */ + if (!is_isa) { + if ((err = w83781d_detect_subclients(adapter, address, + kind, new_client))) + goto ERROR3; + } else { + data->lm75[0] = NULL; + data->lm75[1] = NULL; + } + + /* Initialize the chip */ + w83781d_init_client(new_client); + + /* A few vars need to be filled upon startup */ + for (i = 1; i <= 3; i++) { + data->fan_min[i - 1] = w83781d_read_value(new_client, + W83781D_REG_FAN_MIN(i)); + } + if (kind != w83781d && kind != as99127f) + for (i = 0; i < 4; i++) + data->pwmenable[i] = 1; + + /* Register sysfs hooks */ + device_create_file_in(new_client, 0); + if (kind != w83783s && kind != w83697hf) + device_create_file_in(new_client, 1); + device_create_file_in(new_client, 2); + device_create_file_in(new_client, 3); + device_create_file_in(new_client, 4); + device_create_file_in(new_client, 5); + device_create_file_in(new_client, 6); + if (kind != as99127f && kind != w83781d && kind != w83783s) { + device_create_file_in(new_client, 7); + device_create_file_in(new_client, 8); + } + + device_create_file_fan(new_client, 1); + device_create_file_fan(new_client, 2); + if (kind != w83697hf) + device_create_file_fan(new_client, 3); + + device_create_file_temp(new_client, 1); + device_create_file_temp(new_client, 2); + if (kind != w83783s && kind != w83697hf) + device_create_file_temp(new_client, 3); + + if (kind != w83697hf) + device_create_file_vid(new_client); + + if (kind != w83697hf) + device_create_file_vrm(new_client); + + device_create_file_fan_div(new_client, 1); + device_create_file_fan_div(new_client, 2); + if (kind != w83697hf) + device_create_file_fan_div(new_client, 3); + + device_create_file_alarms(new_client); + + device_create_file_beep(new_client); + + if (kind != w83781d && kind != as99127f) { + device_create_file_pwm(new_client, 1); + device_create_file_pwm(new_client, 2); + device_create_file_pwmenable(new_client, 2); + } + if (kind == w83782d && !is_isa) { + device_create_file_pwm(new_client, 3); + device_create_file_pwm(new_client, 4); + } + + if (kind != as99127f && kind != w83781d) { + device_create_file_sensor(new_client, 1); + device_create_file_sensor(new_client, 2); + if (kind != w83783s && kind != w83697hf) + device_create_file_sensor(new_client, 3); + } + + return 0; + +ERROR3: + i2c_detach_client(new_client); +ERROR2: + kfree(data); +ERROR1: + if (is_isa) + release_region(address, W83781D_EXTENT); +ERROR0: + return err; +} + +static int +w83781d_detach_client(struct i2c_client *client) +{ + int err; + + if (i2c_is_isa_client(client)) + release_region(client->addr, W83781D_EXTENT); + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + + if (i2c_get_clientdata(client)==NULL) { + /* subclients */ + kfree(client); + } else { + /* main client */ + kfree(i2c_get_clientdata(client)); + } + + return 0; +} + +/* The SMBus locks itself, usually, but nothing may access the Winbond between + bank switches. ISA access must always be locked explicitly! + We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks, + would slow down the W83781D access and should not be necessary. + There are some ugly typecasts here, but the good news is - they should + nowhere else be necessary! */ +static int +w83781d_read_value(struct i2c_client *client, u16 reg) +{ + struct w83781d_data *data = i2c_get_clientdata(client); + int res, word_sized, bank; + struct i2c_client *cl; + + down(&data->lock); + if (i2c_is_isa_client(client)) { + word_sized = (((reg & 0xff00) == 0x100) + || ((reg & 0xff00) == 0x200)) + && (((reg & 0x00ff) == 0x50) + || ((reg & 0x00ff) == 0x53) + || ((reg & 0x00ff) == 0x55)); + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(reg >> 8, + client->addr + W83781D_DATA_REG_OFFSET); + } + outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); + res = inb_p(client->addr + W83781D_DATA_REG_OFFSET); + if (word_sized) { + outb_p((reg & 0xff) + 1, + client->addr + W83781D_ADDR_REG_OFFSET); + res = + (res << 8) + inb_p(client->addr + + W83781D_DATA_REG_OFFSET); + } + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); + } + } else { + bank = (reg >> 8) & 0x0f; + if (bank > 2) + /* switch banks */ + i2c_smbus_write_byte_data(client, W83781D_REG_BANK, + bank); + if (bank == 0 || bank > 2) { + res = i2c_smbus_read_byte_data(client, reg & 0xff); + } else { + /* switch to subclient */ + cl = data->lm75[bank - 1]; + /* convert from ISA to LM75 I2C addresses */ + switch (reg & 0xff) { + case 0x50: /* TEMP */ + res = swab16(i2c_smbus_read_word_data(cl, 0)); + break; + case 0x52: /* CONFIG */ + res = i2c_smbus_read_byte_data(cl, 1); + break; + case 0x53: /* HYST */ + res = swab16(i2c_smbus_read_word_data(cl, 2)); + break; + case 0x55: /* OVER */ + default: + res = swab16(i2c_smbus_read_word_data(cl, 3)); + break; + } + } + if (bank > 2) + i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); + } + up(&data->lock); + return res; +} + +static int +w83781d_write_value(struct i2c_client *client, u16 reg, u16 value) +{ + struct w83781d_data *data = i2c_get_clientdata(client); + int word_sized, bank; + struct i2c_client *cl; + + down(&data->lock); + if (i2c_is_isa_client(client)) { + word_sized = (((reg & 0xff00) == 0x100) + || ((reg & 0xff00) == 0x200)) + && (((reg & 0x00ff) == 0x53) + || ((reg & 0x00ff) == 0x55)); + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(reg >> 8, + client->addr + W83781D_DATA_REG_OFFSET); + } + outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); + if (word_sized) { + outb_p(value >> 8, + client->addr + W83781D_DATA_REG_OFFSET); + outb_p((reg & 0xff) + 1, + client->addr + W83781D_ADDR_REG_OFFSET); + } + outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET); + if (reg & 0xff00) { + outb_p(W83781D_REG_BANK, + client->addr + W83781D_ADDR_REG_OFFSET); + outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); + } + } else { + bank = (reg >> 8) & 0x0f; + if (bank > 2) + /* switch banks */ + i2c_smbus_write_byte_data(client, W83781D_REG_BANK, + bank); + if (bank == 0 || bank > 2) { + i2c_smbus_write_byte_data(client, reg & 0xff, + value & 0xff); + } else { + /* switch to subclient */ + cl = data->lm75[bank - 1]; + /* convert from ISA to LM75 I2C addresses */ + switch (reg & 0xff) { + case 0x52: /* CONFIG */ + i2c_smbus_write_byte_data(cl, 1, value & 0xff); + break; + case 0x53: /* HYST */ + i2c_smbus_write_word_data(cl, 2, swab16(value)); + break; + case 0x55: /* OVER */ + i2c_smbus_write_word_data(cl, 3, swab16(value)); + break; + } + } + if (bank > 2) + i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); + } + up(&data->lock); + return 0; +} + +/* Called when we have found a new W83781D. It should set limits, etc. */ +static void +w83781d_init_client(struct i2c_client *client) +{ + struct w83781d_data *data = i2c_get_clientdata(client); + int i, p; + int type = data->type; + u8 tmp; + + if (init && type != as99127f) { /* this resets registers we don't have + documentation for on the as99127f */ + /* save these registers */ + i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); + p = w83781d_read_value(client, W83781D_REG_PWMCLK12); + /* Reset all except Watchdog values and last conversion values + This sets fan-divs to 2, among others */ + w83781d_write_value(client, W83781D_REG_CONFIG, 0x80); + /* Restore the registers and disable power-on abnormal beep. + This saves FAN 1/2/3 input/output values set by BIOS. */ + w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80); + w83781d_write_value(client, W83781D_REG_PWMCLK12, p); + /* Disable master beep-enable (reset turns it on). + Individual beep_mask should be reset to off but for some reason + disabling this bit helps some people not get beeped */ + w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0); + } + + data->vrm = i2c_which_vrm(); + + if ((type != w83781d) && (type != as99127f)) { + tmp = w83781d_read_value(client, W83781D_REG_SCFG1); + for (i = 1; i <= 3; i++) { + if (!(tmp & BIT_SCFG1[i - 1])) { + data->sens[i - 1] = W83781D_DEFAULT_BETA; + } else { + if (w83781d_read_value + (client, + W83781D_REG_SCFG2) & BIT_SCFG2[i - 1]) + data->sens[i - 1] = 1; + else + data->sens[i - 1] = 2; + } + if ((type == w83783s || type == w83697hf) && (i == 2)) + break; + } + } + + if (init && type != as99127f) { + /* Enable temp2 */ + tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG); + if (tmp & 0x01) { + dev_warn(&client->dev, "Enabling temp2, readings " + "might not make sense\n"); + w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG, + tmp & 0xfe); + } + + /* Enable temp3 */ + if (type != w83783s && type != w83697hf) { + tmp = w83781d_read_value(client, + W83781D_REG_TEMP3_CONFIG); + if (tmp & 0x01) { + dev_warn(&client->dev, "Enabling temp3, " + "readings might not make sense\n"); + w83781d_write_value(client, + W83781D_REG_TEMP3_CONFIG, tmp & 0xfe); + } + } + + if (type != w83781d) { + /* enable comparator mode for temp2 and temp3 so + alarm indication will work correctly */ + i = w83781d_read_value(client, W83781D_REG_IRQ); + if (!(i & 0x40)) + w83781d_write_value(client, W83781D_REG_IRQ, + i | 0x40); + } + } + + /* Start monitoring */ + w83781d_write_value(client, W83781D_REG_CONFIG, + (w83781d_read_value(client, + W83781D_REG_CONFIG) & 0xf7) + | 0x01); +} + +static struct w83781d_data *w83781d_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83781d_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(dev, "Starting device update\n"); + + for (i = 0; i <= 8; i++) { + if ((data->type == w83783s || data->type == w83697hf) + && (i == 1)) + continue; /* 783S has no in1 */ + data->in[i] = + w83781d_read_value(client, W83781D_REG_IN(i)); + data->in_min[i] = + w83781d_read_value(client, W83781D_REG_IN_MIN(i)); + data->in_max[i] = + w83781d_read_value(client, W83781D_REG_IN_MAX(i)); + if ((data->type != w83782d) && (data->type != w83697hf) + && (data->type != w83627hf) && (i == 6)) + break; + } + for (i = 1; i <= 3; i++) { + data->fan[i - 1] = + w83781d_read_value(client, W83781D_REG_FAN(i)); + data->fan_min[i - 1] = + w83781d_read_value(client, W83781D_REG_FAN_MIN(i)); + } + if (data->type != w83781d && data->type != as99127f) { + for (i = 1; i <= 4; i++) { + data->pwm[i - 1] = + w83781d_read_value(client, + W83781D_REG_PWM(i)); + if ((data->type != w83782d + || i2c_is_isa_client(client)) + && i == 2) + break; + } + /* Only PWM2 can be disabled */ + data->pwmenable[1] = (w83781d_read_value(client, + W83781D_REG_PWMCLK12) & 0x08) >> 3; + } + + data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1)); + data->temp_max = + w83781d_read_value(client, W83781D_REG_TEMP_OVER(1)); + data->temp_max_hyst = + w83781d_read_value(client, W83781D_REG_TEMP_HYST(1)); + data->temp_add[0] = + w83781d_read_value(client, W83781D_REG_TEMP(2)); + data->temp_max_add[0] = + w83781d_read_value(client, W83781D_REG_TEMP_OVER(2)); + data->temp_max_hyst_add[0] = + w83781d_read_value(client, W83781D_REG_TEMP_HYST(2)); + if (data->type != w83783s && data->type != w83697hf) { + data->temp_add[1] = + w83781d_read_value(client, W83781D_REG_TEMP(3)); + data->temp_max_add[1] = + w83781d_read_value(client, + W83781D_REG_TEMP_OVER(3)); + data->temp_max_hyst_add[1] = + w83781d_read_value(client, + W83781D_REG_TEMP_HYST(3)); + } + i = w83781d_read_value(client, W83781D_REG_VID_FANDIV); + if (data->type != w83697hf) { + data->vid = i & 0x0f; + data->vid |= + (w83781d_read_value(client, W83781D_REG_CHIPID) & + 0x01) + << 4; + } + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = (i >> 6) & 0x03; + if (data->type != w83697hf) { + data->fan_div[2] = (w83781d_read_value(client, + W83781D_REG_PIN) + >> 6) & 0x03; + } + if ((data->type != w83781d) && (data->type != as99127f)) { + i = w83781d_read_value(client, W83781D_REG_VBAT); + data->fan_div[0] |= (i >> 3) & 0x04; + data->fan_div[1] |= (i >> 4) & 0x04; + if (data->type != w83697hf) + data->fan_div[2] |= (i >> 5) & 0x04; + } + data->alarms = + w83781d_read_value(client, + W83781D_REG_ALARM1) + + (w83781d_read_value(client, W83781D_REG_ALARM2) << 8); + if ((data->type == w83782d) || (data->type == w83627hf)) { + data->alarms |= + w83781d_read_value(client, + W83781D_REG_ALARM3) << 16; + } + i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2); + data->beep_enable = i >> 7; + data->beep_mask = ((i & 0x7f) << 8) + + w83781d_read_value(client, W83781D_REG_BEEP_INTS1); + if ((data->type != w83781d) && (data->type != as99127f)) { + data->beep_mask |= + w83781d_read_value(client, + W83781D_REG_BEEP_INTS3) << 16; + } + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init +sensors_w83781d_init(void) +{ + return i2c_add_driver(&w83781d_driver); +} + +static void __exit +sensors_w83781d_exit(void) +{ + i2c_del_driver(&w83781d_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "and Mark Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("W83781D driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83781d_init); +module_exit(sensors_w83781d_exit); diff --git a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c new file mode 100644 index 000000000000..59bbc5881fa6 --- /dev/null +++ b/drivers/i2c/chips/w83l785ts.c @@ -0,0 +1,329 @@ +/* + * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + * + * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made + * by Winbond. It reports a single external temperature with a 1 deg + * resolution and a 3 deg accuracy. Datasheet can be obtained from + * Winbond's website at: + * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf + * + * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare + * <khali@linux-fr.org>. + * + * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read + * error handling mechanism. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* How many retries on register read error */ +#define MAX_RETRIES 5 + +/* + * Address to scan + * Address is fully defined internally and cannot be changed. + */ + +static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(w83l785ts); + +/* + * The W83L785TS-S registers + * Manufacturer ID is 0x5CA3 for Winbond. + */ + +#define W83L785TS_REG_MAN_ID1 0x4D +#define W83L785TS_REG_MAN_ID2 0x4C +#define W83L785TS_REG_CHIP_ID 0x4E +#define W83L785TS_REG_CONFIG 0x40 +#define W83L785TS_REG_TYPE 0x52 +#define W83L785TS_REG_TEMP 0x27 +#define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */ + +/* + * Conversions + * The W83L785TS-S uses signed 8-bit values. + */ + +#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) + +/* + * Functions declaration + */ + +static int w83l785ts_attach_adapter(struct i2c_adapter *adapter); +static int w83l785ts_detect(struct i2c_adapter *adapter, int address, + int kind); +static int w83l785ts_detach_client(struct i2c_client *client); +static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval); +static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver w83l785ts_driver = { + .owner = THIS_MODULE, + .name = "w83l785ts", + .id = I2C_DRIVERID_W83L785TS, + .flags = I2C_DF_NOTIFY, + .attach_adapter = w83l785ts_attach_adapter, + .detach_client = w83l785ts_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct w83l785ts_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + u8 temp, temp_over; +}; + +/* + * Sysfs stuff + */ + +static ssize_t show_temp(struct device *dev, char *buf) +{ + struct w83l785ts_data *data = w83l785ts_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); +} + +static ssize_t show_temp_over(struct device *dev, char *buf) +{ + struct w83l785ts_data *data = w83l785ts_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL); + +/* + * Real code + */ + +static int w83l785ts_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, w83l785ts_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct w83l785ts_data *data; + int err = 0; + + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct w83l785ts_data)); + + + /* The common I2C client data is placed right before the + * W83L785TS-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &w83l785ts_driver; + new_client->flags = 0; + + /* + * Now we do the remaining detection. A negative kind means that + * the driver was loaded with no force parameter (default), so we + * must both detect and identify the chip (actually there is only + * one possible kind of chip for now, W83L785TS-S). A zero kind means + * that the driver was loaded with the force parameter, the detection + * step shall be skipped. A positive kind means that the driver + * was loaded with the force parameter and a given kind of chip is + * requested, so both the detection and the identification steps + * are skipped. + */ + if (kind < 0) { /* detection */ + if (((w83l785ts_read_value(new_client, + W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00) + || ((w83l785ts_read_value(new_client, + W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) { + dev_dbg(&adapter->dev, + "W83L785TS-S detection failed at 0x%02x.\n", + address); + goto exit_free; + } + } + + if (kind <= 0) { /* identification */ + u16 man_id; + u8 chip_id; + + man_id = (w83l785ts_read_value(new_client, + W83L785TS_REG_MAN_ID1, 0) << 8) + + w83l785ts_read_value(new_client, + W83L785TS_REG_MAN_ID2, 0); + chip_id = w83l785ts_read_value(new_client, + W83L785TS_REG_CHIP_ID, 0); + + if (man_id == 0x5CA3) { /* Winbond */ + if (chip_id == 0x70) { /* W83L785TS-S */ + kind = w83l785ts; + } + } + + if (kind <= 0) { /* identification failed */ + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%04X, " + "chip_id=0x%02X).\n", man_id, chip_id); + goto exit_free; + } + } + + /* We can fill in the remaining client fields. */ + strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Default values in case the first read fails (unlikely). */ + data->temp_over = data->temp = 0; + + /* Tell the I2C layer a new client has arrived. */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* + * Initialize the W83L785TS chip + * Nothing yet, assume it is already started. + */ + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int w83l785ts_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) +{ + int value, i; + + /* Frequent read errors have been reported on Asus boards, so we + * retry on read errors. If it still fails (unlikely), return the + * default value requested by the caller. */ + for (i = 1; i <= MAX_RETRIES; i++) { + value = i2c_smbus_read_byte_data(client, reg); + if (value >= 0) { + dev_dbg(&client->dev, "Read 0x%02x from register " + "0x%02x.\n", value, reg); + return value; + } + dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i); + msleep(i); + } + + dev_err(&client->dev, "Couldn't read value from register 0x%02x. " + "Please report.\n", reg); + return defval; +} + +static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83l785ts_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { + dev_dbg(&client->dev, "Updating w83l785ts data.\n"); + data->temp = w83l785ts_read_value(client, + W83L785TS_REG_TEMP, data->temp); + data->temp_over = w83l785ts_read_value(client, + W83L785TS_REG_TEMP_OVER, data->temp_over); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_w83l785ts_init(void) +{ + return i2c_add_driver(&w83l785ts_driver); +} + +static void __exit sensors_w83l785ts_exit(void) +{ + i2c_del_driver(&w83l785ts_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("W83L785TS-S driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83l785ts_init); +module_exit(sensors_w83l785ts_exit); |