summaryrefslogtreecommitdiff
path: root/drivers/i2c/chips
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2009-09-18 22:45:44 +0200
committerJean Delvare <khali@linux-fr.org>2009-09-18 22:45:44 +0200
commitac7809414fb1e3e49b88ad6016e57598594aa4e2 (patch)
treeb00de5f5130f8b21bc1be49e5b90c0190aed555d /drivers/i2c/chips
parent27693ce5f372c0af3b0730f5152b35432afa0fd7 (diff)
i2c/tsl2550: Use combined SMBus transactions
Make the I/O faster, mainly by using combined SMBus transactions when possible. While the TSL2550 datasheet doesn't say the device supports them, they seem to work just fine in practice, and a combined transaction is faster than two simple transactions in many cases and always more reliable. A side effect is to suppress the delays between SMBus writes and reads. The datasheet doesn't say they are needed and things work just fine for me without them. I also couldn't see any reason for the delay between reading the two channels. Nor for the loop to get a reading in the first place. The 400 ms delay between samples only matters at chip power-up, after that the chip always hold the previously sampled value so we never get to wait. All these changes make reading the lux value much faster and cheaper. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Michele De Candia <michele.decandia@valueteam.com> Cc: Rodolfo Giometti <giometti@linux.it>
Diffstat (limited to 'drivers/i2c/chips')
-rw-r--r--drivers/i2c/chips/tsl2550.c42
1 files changed, 10 insertions, 32 deletions
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index b96f3025e588..aa96bd2d27ea 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -24,10 +24,9 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
-#include <linux/delay.h>
#define TSL2550_DRV_NAME "tsl2550"
-#define DRIVER_VERSION "1.1.2"
+#define DRIVER_VERSION "1.2"
/*
* Defines
@@ -96,32 +95,13 @@ static int tsl2550_set_power_state(struct i2c_client *client, int state)
static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
{
- unsigned long end;
- int loop = 0, ret = 0;
+ int ret;
- /*
- * Read ADC channel waiting at most 400ms (see data sheet for further
- * info).
- * To avoid long busy wait we spin for few milliseconds then
- * start sleeping.
- */
- end = jiffies + msecs_to_jiffies(400);
- while (time_before(jiffies, end)) {
- i2c_smbus_write_byte(client, cmd);
-
- if (loop++ < 5)
- mdelay(1);
- else
- msleep(1);
-
- ret = i2c_smbus_read_byte(client);
- if (ret < 0)
- return ret;
- else if (ret & 0x0080)
- break;
- }
+ ret = i2c_smbus_read_byte_data(client, cmd);
+ if (ret < 0)
+ return ret;
if (!(ret & 0x80))
- return -EIO;
+ return -EAGAIN;
return ret & 0x7f; /* remove the "valid" bit */
}
@@ -285,8 +265,6 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
return ret;
ch0 = ret;
- mdelay(1);
-
ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
if (ret < 0)
return ret;
@@ -345,11 +323,10 @@ static int tsl2550_init_client(struct i2c_client *client)
* Probe the chip. To do so we try to power up the device and then to
* read back the 0x03 code
*/
- err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+ err = i2c_smbus_read_byte_data(client, TSL2550_POWER_UP);
if (err < 0)
return err;
- mdelay(1);
- if (i2c_smbus_read_byte(client) != TSL2550_POWER_UP)
+ if (err != TSL2550_POWER_UP)
return -ENODEV;
data->power_state = 1;
@@ -374,7 +351,8 @@ static int __devinit tsl2550_probe(struct i2c_client *client,
struct tsl2550_data *data;
int *opmode, err = 0;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+ | I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
err = -EIO;
goto exit;
}