Merge tag 'v5.4.67' into 5.4-2.1.x-imx

This is the 5.4.67 stable release

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>

3 files changed, 44 insertions, 22 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 8ea850eed18f..1d3691a049b1 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -41,8 +41,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap)
 		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
 		pca_outw(adap, I2C_PCA_IND, 0xA5);
 		pca_outw(adap, I2C_PCA_IND, 0x5A);
+
+		/*
+		 * After a reset we need to re-apply any configuration
+		 * (calculated in pca_init) to get the bus in a working state.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi);
+
+		pca_set_con(adap, I2C_PCA_CON_ENSIO);
 	} else {
 		adap->reset_chip(adap->data);
+		pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq);
 	}
 }
 
@@ -423,13 +437,14 @@ static int pca_init(struct i2c_adapter *adap)
 				" Use the nominal frequency.\n", adap->name);
 		}
 
-		pca_reset(pca_data);
-
 		clock = pca_clock(pca_data);
 		printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
 		     adap->name, freqs[clock]);
 
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.clock_freq = clock;
+
+		pca_reset(pca_data);
 	} else {
 		int clock;
 		int mode;
@@ -496,19 +511,15 @@ static int pca_init(struct i2c_adapter *adap)
 			thi = tlow * min_thi / min_tlow;
 		}
 
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.mode = mode;
+		pca_data->bus_settings.tlow = tlow;
+		pca_data->bus_settings.thi = thi;
+
 		pca_reset(pca_data);
 
 		printk(KERN_INFO
 		     "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
-
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
-		pca_outw(pca_data, I2C_PCA_IND, mode);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
-		pca_outw(pca_data, I2C_PCA_IND, tlow);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
-		pca_outw(pca_data, I2C_PCA_IND, thi);
-
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
 	}
 	udelay(500); /* 500 us for oscillator to stabilise */
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 3ff6fbd79b12..9a80c3c7e8af 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1688,6 +1688,16 @@ static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
 static inline void i801_acpi_remove(struct i801_priv *priv) { }
 #endif
 
+static unsigned char i801_setup_hstcfg(struct i801_priv *priv)
+{
+	unsigned char hstcfg = priv->original_hstcfg;
+
+	hstcfg &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	hstcfg |= SMBHSTCFG_HST_EN;
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
+	return hstcfg;
+}
+
 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned char temp;
@@ -1804,14 +1814,10 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return err;
 	}
 
-	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
-	priv->original_hstcfg = temp;
-	temp &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
-	if (!(temp & SMBHSTCFG_HST_EN)) {
+	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+	temp = i801_setup_hstcfg(priv);
+	if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
 		dev_info(&dev->dev, "Enabling SMBus device\n");
-		temp |= SMBHSTCFG_HST_EN;
-	}
-	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
 
 	if (temp & SMBHSTCFG_SMB_SMI_EN) {
 		dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
@@ -1937,6 +1943,7 @@ static int i801_resume(struct device *dev)
 {
 	struct i801_priv *priv = dev_get_drvdata(dev);
 
+	i801_setup_hstcfg(priv);
 	i801_enable_host_notify(&priv->adapter);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 89224913f578..081a1169ecea 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -25,6 +25,7 @@
 #include <linux/of_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
+#include <linux/dma/mxs-dma.h>
 
 #define DRIVER_NAME "mxs-i2c"
 
@@ -200,7 +201,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1,
 					DMA_MEM_TO_DEV,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					DMA_PREP_INTERRUPT |
+					MXS_DMA_CTRL_WAIT4END);
 		if (!desc) {
 			dev_err(i2c->dev,
 				"Failed to get DMA data write descriptor.\n");
@@ -228,7 +230,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
 					DMA_DEV_TO_MEM,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					DMA_PREP_INTERRUPT |
+					MXS_DMA_CTRL_WAIT4END);
 		if (!desc) {
 			dev_err(i2c->dev,
 				"Failed to get DMA data write descriptor.\n");
@@ -260,7 +263,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
 					DMA_MEM_TO_DEV,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					DMA_PREP_INTERRUPT |
+					MXS_DMA_CTRL_WAIT4END);
 		if (!desc) {
 			dev_err(i2c->dev,
 				"Failed to get DMA data write descriptor.\n");