ide: add ->cable_detect method to ide_hwif_t

* Add ->cable_detect method to ide_hwif_t.

* Call the new method in ide_init_port() if:
  - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
  - DMA initialization was successful (if hwif->dma_base is not set
    ide_init_port() sets hwif->ultra_mask to zero)
  - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')

* Convert PCI host drivers to use ->cable_detect method.

While at it:

* Factor out cable detection to separate functions (if not already done).

* hpt366.c/it8213.c/slc90e66.c:
  - don't check cable type if "idex=ata66" is used

* pdc202xx_new.c:
  - add __devinit tag to pdcnew_cable_detect()

* pdc202xx_old.c:
  - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
  - add __devinit tag to pdc2026x_old_cable_detect()

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 12 insertions, 13 deletions

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 824df78c7012..ca302fcba3ab 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -166,6 +166,16 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 	return dev->irq;
 }
 
+static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+	pci_read_config_byte(dev, 0x49, &ata66);
+
+	return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -174,21 +184,10 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 
 	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
 		hwif->set_dma_mode = &aec6210_set_mode;
-	else
+	else {
 		hwif->set_dma_mode = &aec6260_set_mode;
 
-	if (hwif->dma_base == 0)
-		return;
-
-	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
-		return;
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
-		u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
-		pci_read_config_byte(dev, 0x49, &ata66);
-
-		hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+		hwif->cable_detect = atp86x_cable_detect;
 	}
 }