ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 836 deletions

diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
deleted file mode 100644
index e4306647d00d..000000000000
--- a/drivers/ide/pci/cmd640.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/*
- *  Copyright (C) 1995-1996  Linus Torvalds & authors (see below)
- */
-
-/*
- *  Original authors:	abramov@cecmow.enet.dec.com (Igor Abramov)
- *			mlord@pobox.com (Mark Lord)
- *
- *  See linux/MAINTAINERS for address of current maintainer.
- *
- *  This file provides support for the advanced features and bugs
- *  of IDE interfaces using the CMD Technologies 0640 IDE interface chip.
- *
- *  These chips are basically fucked by design, and getting this driver
- *  to work on every motherboard design that uses this screwed chip seems
- *  bloody well impossible.  However, we're still trying.
- *
- *  Version 0.97 worked for everybody.
- *
- *  User feedback is essential.  Many thanks to the beta test team:
- *
- *  A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com,
- *  bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz,
- *  chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de,
- *  derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de,
- *  flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net,
- *  j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net,
- *  kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu,
- *  peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com,
- *  s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net,
- *  steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com
- *  liug@mama.indstate.edu, and others.
- *
- *  Version 0.01	Initial version, hacked out of ide.c,
- *			and #include'd rather than compiled separately.
- *			This will get cleaned up in a subsequent release.
- *
- *  Version 0.02	Fixes for vlb initialization code, enable prefetch
- *			for versions 'B' and 'C' of chip by default,
- *			some code cleanup.
- *
- *  Version 0.03	Added reset of secondary interface,
- *			and black list for devices which are not compatible
- *			with prefetch mode. Separate function for setting
- *			prefetch is added, possibly it will be called some
- *			day from ioctl processing code.
- *
- *  Version 0.04	Now configs/compiles separate from ide.c
- *
- *  Version 0.05	Major rewrite of interface timing code.
- *			Added new function cmd640_set_mode to set PIO mode
- *			from ioctl call. New drives added to black list.
- *
- *  Version 0.06	More code cleanup. Prefetch is enabled only for
- *			detected hard drives, not included in prefetch
- *			black list.
- *
- *  Version 0.07	Changed to more conservative drive tuning policy.
- *			Unknown drives, which report PIO < 4 are set to
- *			(reported_PIO - 1) if it is supported, or to PIO0.
- *			List of known drives extended by info provided by
- *			CMD at their ftp site.
- *
- *  Version 0.08	Added autotune/noautotune support.
- *
- *  Version 0.09	Try to be smarter about 2nd port enabling.
- *  Version 0.10	Be nice and don't reset 2nd port.
- *  Version 0.11	Try to handle more weird situations.
- *
- *  Version 0.12	Lots of bug fixes from Laszlo Peter
- *			irq unmasking disabled for reliability.
- *			try to be even smarter about the second port.
- *			tidy up source code formatting.
- *  Version 0.13	permit irq unmasking again.
- *  Version 0.90	massive code cleanup, some bugs fixed.
- *			defaults all drives to PIO mode0, prefetch off.
- *			autotune is OFF by default, with compile time flag.
- *			prefetch can be turned OFF/ON using "hdparm -p8/-p9"
- *			 (requires hdparm-3.1 or newer)
- *  Version 0.91	first release to linux-kernel list.
- *  Version 0.92	move initial reg dump to separate callable function
- *			change "readahead" to "prefetch" to avoid confusion
- *  Version 0.95	respect original BIOS timings unless autotuning.
- *			tons of code cleanup and rearrangement.
- *			added CONFIG_BLK_DEV_CMD640_ENHANCED option
- *			prevent use of unmask when prefetch is on
- *  Version 0.96	prevent use of io_32bit when prefetch is off
- *  Version 0.97	fix VLB secondary interface for sjd@slip.net
- *			other minor tune-ups:  0.96 was very good.
- *  Version 0.98	ignore PCI version when disabled by BIOS
- *  Version 0.99	display setup/active/recovery clocks with PIO mode
- *  Version 1.00	Mmm.. cannot depend on PCMD_ENA in all systems
- *  Version 1.01	slow/fast devsel can be selected with "hdparm -p6/-p7"
- *			 ("fast" is necessary for 32bit I/O in some systems)
- *  Version 1.02	fix bug that resulted in slow "setup times"
- *			 (patch courtesy of Zoltan Hidvegi)
- */
-
-#define CMD640_PREFETCH_MASKS 1
-
-/*#define CMD640_DUMP_REGS */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cmd640"
-
-static int cmd640_vlb;
-
-/*
- * CMD640 specific registers definition.
- */
-
-#define VID		0x00
-#define DID		0x02
-#define PCMD		0x04
-#define   PCMD_ENA	0x01
-#define PSTTS		0x06
-#define REVID		0x08
-#define PROGIF		0x09
-#define SUBCL		0x0a
-#define BASCL		0x0b
-#define BaseA0		0x10
-#define BaseA1		0x14
-#define BaseA2		0x18
-#define BaseA3		0x1c
-#define INTLINE		0x3c
-#define INPINE		0x3d
-
-#define	CFR		0x50
-#define   CFR_DEVREV		0x03
-#define   CFR_IDE01INTR		0x04
-#define	  CFR_DEVID		0x18
-#define	  CFR_AT_VESA_078h	0x20
-#define	  CFR_DSA1		0x40
-#define	  CFR_DSA0		0x80
-
-#define CNTRL		0x51
-#define	  CNTRL_DIS_RA0		0x40
-#define   CNTRL_DIS_RA1		0x80
-#define	  CNTRL_ENA_2ND		0x08
-
-#define	CMDTIM		0x52
-#define	ARTTIM0		0x53
-#define	DRWTIM0		0x54
-#define ARTTIM1 	0x55
-#define DRWTIM1		0x56
-#define ARTTIM23	0x57
-#define   ARTTIM23_DIS_RA2	0x04
-#define   ARTTIM23_DIS_RA3	0x08
-#define DRWTIM23	0x58
-#define BRST		0x59
-
-/*
- * Registers and masks for easy access by drive index:
- */
-static u8 prefetch_regs[4]  = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
-static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
-static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
-
-/*
- * Current cmd640 timing values for each drive.
- * The defaults for each are the slowest possible timings.
- */
-static u8 setup_counts[4]    = {4, 4, 4, 4};     /* Address setup count (in clocks) */
-static u8 active_counts[4]   = {16, 16, 16, 16}; /* Active count   (encoded) */
-static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
-
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static DEFINE_SPINLOCK(cmd640_lock);
-
-/*
- * Interface to access cmd640x registers
- */
-static unsigned int cmd640_key;
-static void (*__put_cmd640_reg)(u16 reg, u8 val);
-static u8 (*__get_cmd640_reg)(u16 reg);
-
-/*
- * This is read from the CFR reg, and is used in several places.
- */
-static unsigned int cmd640_chip_version;
-
-/*
- * The CMD640x chip does not support DWORD config write cycles, but some
- * of the BIOSes use them to implement the config services.
- * Therefore, we must use direct IO instead.
- */
-
-/* PCI method 1 access */
-
-static void put_cmd640_reg_pci1(u16 reg, u8 val)
-{
-	outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
-	outb_p(val, (reg & 3) | 0xcfc);
-}
-
-static u8 get_cmd640_reg_pci1(u16 reg)
-{
-	outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
-	return inb_p((reg & 3) | 0xcfc);
-}
-
-/* PCI method 2 access (from CMD datasheet) */
-
-static void put_cmd640_reg_pci2(u16 reg, u8 val)
-{
-	outb_p(0x10, 0xcf8);
-	outb_p(val, cmd640_key + reg);
-	outb_p(0, 0xcf8);
-}
-
-static u8 get_cmd640_reg_pci2(u16 reg)
-{
-	u8 b;
-
-	outb_p(0x10, 0xcf8);
-	b = inb_p(cmd640_key + reg);
-	outb_p(0, 0xcf8);
-	return b;
-}
-
-/* VLB access */
-
-static void put_cmd640_reg_vlb(u16 reg, u8 val)
-{
-	outb_p(reg, cmd640_key);
-	outb_p(val, cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg_vlb(u16 reg)
-{
-	outb_p(reg, cmd640_key);
-	return inb_p(cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg(u16 reg)
-{
-	unsigned long flags;
-	u8 b;
-
-	spin_lock_irqsave(&cmd640_lock, flags);
-	b = __get_cmd640_reg(reg);
-	spin_unlock_irqrestore(&cmd640_lock, flags);
-	return b;
-}
-
-static void put_cmd640_reg(u16 reg, u8 val)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cmd640_lock, flags);
-	__put_cmd640_reg(reg, val);
-	spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-static int __init match_pci_cmd640_device(void)
-{
-	const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
-	unsigned int i;
-	for (i = 0; i < 4; i++) {
-		if (get_cmd640_reg(i) != ven_dev[i])
-			return 0;
-	}
-#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
-	if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
-		printk("ide: cmd640 on PCI disabled by BIOS\n");
-		return 0;
-	}
-#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
-	return 1; /* success */
-}
-
-/*
- * Probe for CMD640x -- pci method 1
- */
-static int __init probe_for_cmd640_pci1(void)
-{
-	__get_cmd640_reg = get_cmd640_reg_pci1;
-	__put_cmd640_reg = put_cmd640_reg_pci1;
-	for (cmd640_key = 0x80000000;
-	     cmd640_key <= 0x8000f800;
-	     cmd640_key += 0x800) {
-		if (match_pci_cmd640_device())
-			return 1; /* success */
-	}
-	return 0;
-}
-
-/*
- * Probe for CMD640x -- pci method 2
- */
-static int __init probe_for_cmd640_pci2(void)
-{
-	__get_cmd640_reg = get_cmd640_reg_pci2;
-	__put_cmd640_reg = put_cmd640_reg_pci2;
-	for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) {
-		if (match_pci_cmd640_device())
-			return 1; /* success */
-	}
-	return 0;
-}
-
-/*
- * Probe for CMD640x -- vlb
- */
-static int __init probe_for_cmd640_vlb(void)
-{
-	u8 b;
-
-	__get_cmd640_reg = get_cmd640_reg_vlb;
-	__put_cmd640_reg = put_cmd640_reg_vlb;
-	cmd640_key = 0x178;
-	b = get_cmd640_reg(CFR);
-	if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {
-		cmd640_key = 0x78;
-		b = get_cmd640_reg(CFR);
-		if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))
-			return 0;
-	}
-	return 1; /* success */
-}
-
-/*
- *  Returns 1 if an IDE interface/drive exists at 0x170,
- *  Returns 0 otherwise.
- */
-static int __init secondary_port_responding(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cmd640_lock, flags);
-
-	outb_p(0x0a, 0x176);	/* select drive0 */
-	udelay(100);
-	if ((inb_p(0x176) & 0x1f) != 0x0a) {
-		outb_p(0x1a, 0x176); /* select drive1 */
-		udelay(100);
-		if ((inb_p(0x176) & 0x1f) != 0x1a) {
-			spin_unlock_irqrestore(&cmd640_lock, flags);
-			return 0; /* nothing responded */
-		}
-	}
-	spin_unlock_irqrestore(&cmd640_lock, flags);
-	return 1; /* success */
-}
-
-#ifdef CMD640_DUMP_REGS
-/*
- * Dump out all cmd640 registers.  May be called from ide.c
- */
-static void cmd640_dump_regs(void)
-{
-	unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
-
-	/* Dump current state of chip registers */
-	printk("ide: cmd640 internal register dump:");
-	for (; reg <= 0x59; reg++) {
-		if (!(reg & 0x0f))
-			printk("\n%04x:", reg);
-		printk(" %02x", get_cmd640_reg(reg));
-	}
-	printk("\n");
-}
-#endif
-
-static void __set_prefetch_mode(ide_drive_t *drive, int mode)
-{
-	if (mode) {	/* want prefetch on? */
-#if CMD640_PREFETCH_MASKS
-		drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
-		drive->dev_flags &= ~IDE_DFLAG_UNMASK;
-#endif
-		drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
-	} else {
-		drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
-		drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
-		drive->io_32bit = 0;
-	}
-}
-
-#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED
-/*
- * Check whether prefetch is on for a drive,
- * and initialize the unmask flags for safe operation.
- */
-static void __init check_prefetch(ide_drive_t *drive, unsigned int index)
-{
-	u8 b = get_cmd640_reg(prefetch_regs[index]);
-
-	__set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1);
-}
-#else
-
-/*
- * Sets prefetch mode for a drive.
- */
-static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode)
-{
-	unsigned long flags;
-	int reg = prefetch_regs[index];
-	u8 b;
-
-	spin_lock_irqsave(&cmd640_lock, flags);
-	b = __get_cmd640_reg(reg);
-	__set_prefetch_mode(drive, mode);
-	if (mode)
-		b &= ~prefetch_masks[index];	/* enable prefetch */
-	else
-		b |= prefetch_masks[index];	/* disable prefetch */
-	__put_cmd640_reg(reg, b);
-	spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-/*
- * Dump out current drive clocks settings
- */
-static void display_clocks(unsigned int index)
-{
-	u8 active_count, recovery_count;
-
-	active_count = active_counts[index];
-	if (active_count == 1)
-		++active_count;
-	recovery_count = recovery_counts[index];
-	if (active_count > 3 && recovery_count == 1)
-		++recovery_count;
-	if (cmd640_chip_version > 1)
-		recovery_count += 1;  /* cmd640b uses (count + 1)*/
-	printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count);
-}
-
-/*
- * Pack active and recovery counts into single byte representation
- * used by controller
- */
-static inline u8 pack_nibbles(u8 upper, u8 lower)
-{
-	return ((upper & 0x0f) << 4) | (lower & 0x0f);
-}
-
-/*
- * This routine writes the prepared setup/active/recovery counts
- * for a drive into the cmd640 chipset registers to active them.
- */
-static void program_drive_counts(ide_drive_t *drive, unsigned int index)
-{
-	unsigned long flags;
-	u8 setup_count    = setup_counts[index];
-	u8 active_count   = active_counts[index];
-	u8 recovery_count = recovery_counts[index];
-
-	/*
-	 * Set up address setup count and drive read/write timing registers.
-	 * Primary interface has individual count/timing registers for
-	 * each drive.  Secondary interface has one common set of registers,
-	 * so we merge the timings, using the slowest value for each timing.
-	 */
-	if (index > 1) {
-		ide_hwif_t *hwif = drive->hwif;
-		ide_drive_t *peer = &hwif->drives[!(drive->dn & 1)];
-		unsigned int mate = index ^ 1;
-
-		if (peer->dev_flags & IDE_DFLAG_PRESENT) {
-			if (setup_count < setup_counts[mate])
-				setup_count = setup_counts[mate];
-			if (active_count < active_counts[mate])
-				active_count = active_counts[mate];
-			if (recovery_count < recovery_counts[mate])
-				recovery_count = recovery_counts[mate];
-		}
-	}
-
-	/*
-	 * Convert setup_count to internal chipset representation
-	 */
-	switch (setup_count) {
-	case 4:	 setup_count = 0x00; break;
-	case 3:	 setup_count = 0x80; break;
-	case 1:
-	case 2:	 setup_count = 0x40; break;
-	default: setup_count = 0xc0; /* case 5 */
-	}
-
-	/*
-	 * Now that everything is ready, program the new timings
-	 */
-	spin_lock_irqsave(&cmd640_lock, flags);
-	/*
-	 * Program the address_setup clocks into ARTTIM reg,
-	 * and then the active/recovery counts into the DRWTIM reg
-	 * (this converts counts of 16 into counts of zero -- okay).
-	 */
-	setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f;
-	__put_cmd640_reg(arttim_regs[index], setup_count);
-	__put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count));
-	spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-/*
- * Set a specific pio_mode for a drive
- */
-static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
-			    u8 pio_mode, unsigned int cycle_time)
-{
-	struct ide_timing *t;
-	int setup_time, active_time, recovery_time, clock_time;
-	u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
-	int bus_speed;
-
-	if (cmd640_vlb)
-		bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
-	else
-		bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-
-	if (pio_mode > 5)
-		pio_mode = 5;
-
-	t = ide_timing_find_mode(XFER_PIO_0 + pio_mode);
-	setup_time  = t->setup;
-	active_time = t->active;
-
-	recovery_time = cycle_time - (setup_time + active_time);
-	clock_time = 1000 / bus_speed;
-	cycle_count = DIV_ROUND_UP(cycle_time, clock_time);
-
-	setup_count = DIV_ROUND_UP(setup_time, clock_time);
-
-	active_count = DIV_ROUND_UP(active_time, clock_time);
-	if (active_count < 2)
-		active_count = 2; /* minimum allowed by cmd640 */
-
-	recovery_count = DIV_ROUND_UP(recovery_time, clock_time);
-	recovery_count2 = cycle_count - (setup_count + active_count);
-	if (recovery_count2 > recovery_count)
-		recovery_count = recovery_count2;
-	if (recovery_count < 2)
-		recovery_count = 2; /* minimum allowed by cmd640 */
-	if (recovery_count > 17) {
-		active_count += recovery_count - 17;
-		recovery_count = 17;
-	}
-	if (active_count > 16)
-		active_count = 16; /* maximum allowed by cmd640 */
-	if (cmd640_chip_version > 1)
-		recovery_count -= 1;  /* cmd640b uses (count + 1)*/
-	if (recovery_count > 16)
-		recovery_count = 16; /* maximum allowed by cmd640 */
-
-	setup_counts[index]    = setup_count;
-	active_counts[index]   = active_count;
-	recovery_counts[index] = recovery_count;
-
-	/*
-	 * In a perfect world, we might set the drive pio mode here
-	 * (using WIN_SETFEATURE) before continuing.
-	 *
-	 * But we do not, because:
-	 *	1) this is the wrong place to do it (proper is do_special() in ide.c)
-	 * 	2) in practice this is rarely, if ever, necessary
-	 */
-	program_drive_counts(drive, index);
-}
-
-static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	unsigned int index = 0, cycle_time;
-	u8 b;
-
-	switch (pio) {
-	case 6: /* set fast-devsel off */
-	case 7: /* set fast-devsel on */
-		b = get_cmd640_reg(CNTRL) & ~0x27;
-		if (pio & 1)
-			b |= 0x27;
-		put_cmd640_reg(CNTRL, b);
-		printk("%s: %sabled cmd640 fast host timing (devsel)\n",
-			drive->name, (pio & 1) ? "en" : "dis");
-		return;
-	case 8: /* set prefetch off */
-	case 9: /* set prefetch on */
-		set_prefetch_mode(drive, index, pio & 1);
-		printk("%s: %sabled cmd640 prefetch\n",
-			drive->name, (pio & 1) ? "en" : "dis");
-		return;
-	}
-
-	cycle_time = ide_pio_cycle_time(drive, pio);
-	cmd640_set_mode(drive, index, pio, cycle_time);
-
-	printk("%s: selected cmd640 PIO mode%d (%dns)",
-		drive->name, pio, cycle_time);
-
-	display_clocks(index);
-}
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static void cmd640_init_dev(ide_drive_t *drive)
-{
-	unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-	/*
-	 * Reset timing to the slowest speed and turn off prefetch.
-	 * This way, the drive identify code has a better chance.
-	 */
-	setup_counts[i]    =  4;	/* max possible */
-	active_counts[i]   = 16;	/* max possible */
-	recovery_counts[i] = 16;	/* max possible */
-	program_drive_counts(drive, i);
-	set_prefetch_mode(drive, i, 0);
-	printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i);
-#else
-	/*
-	 * Set the drive unmask flags to match the prefetch setting.
-	 */
-	check_prefetch(drive, i);
-	printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
-		i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on");
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-}
-
-
-static const struct ide_port_ops cmd640_port_ops = {
-	.init_dev		= cmd640_init_dev,
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-	.set_pio_mode		= cmd640_set_pio_mode,
-#endif
-};
-
-static int pci_conf1(void)
-{
-	unsigned long flags;
-	u32 tmp;
-
-	spin_lock_irqsave(&cmd640_lock, flags);
-	outb(0x01, 0xCFB);
-	tmp = inl(0xCF8);
-	outl(0x80000000, 0xCF8);
-	if (inl(0xCF8) == 0x80000000) {
-		outl(tmp, 0xCF8);
-		spin_unlock_irqrestore(&cmd640_lock, flags);
-		return 1;
-	}
-	outl(tmp, 0xCF8);
-	spin_unlock_irqrestore(&cmd640_lock, flags);
-	return 0;
-}
-
-static int pci_conf2(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cmd640_lock, flags);
-	outb(0x00, 0xCFB);
-	outb(0x00, 0xCF8);
-	outb(0x00, 0xCFA);
-	if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) {
-		spin_unlock_irqrestore(&cmd640_lock, flags);
-		return 1;
-	}
-	spin_unlock_irqrestore(&cmd640_lock, flags);
-	return 0;
-}
-
-static const struct ide_port_info cmd640_port_info __initdata = {
-	.chipset		= ide_cmd640,
-	.host_flags		= IDE_HFLAG_SERIALIZE |
-				  IDE_HFLAG_NO_DMA |
-				  IDE_HFLAG_ABUSE_PREFETCH |
-				  IDE_HFLAG_ABUSE_FAST_DEVSEL,
-	.port_ops		= &cmd640_port_ops,
-	.pio_mask		= ATA_PIO5,
-};
-
-static int cmd640x_init_one(unsigned long base, unsigned long ctl)
-{
-	if (!request_region(base, 8, DRV_NAME)) {
-		printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
-				DRV_NAME, base, base + 7);
-		return -EBUSY;
-	}
-
-	if (!request_region(ctl, 1, DRV_NAME)) {
-		printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
-				DRV_NAME, ctl);
-		release_region(base, 8);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-/*
- * Probe for a cmd640 chipset, and initialize it if found.
- */
-static int __init cmd640x_init(void)
-{
-	int second_port_cmd640 = 0, rc;
-	const char *bus_type, *port2;
-	u8 b, cfr;
-	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
-
-	if (cmd640_vlb && probe_for_cmd640_vlb()) {
-		bus_type = "VLB";
-	} else {
-		cmd640_vlb = 0;
-		/* Find out what kind of PCI probing is supported otherwise
-		   Justin Gibbs will sulk.. */
-		if (pci_conf1() && probe_for_cmd640_pci1())
-			bus_type = "PCI (type1)";
-		else if (pci_conf2() && probe_for_cmd640_pci2())
-			bus_type = "PCI (type2)";
-		else
-			return 0;
-	}
-	/*
-	 * Undocumented magic (there is no 0x5b reg in specs)
-	 */
-	put_cmd640_reg(0x5b, 0xbd);
-	if (get_cmd640_reg(0x5b) != 0xbd) {
-		printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n");
-		return 0;
-	}
-	put_cmd640_reg(0x5b, 0);
-
-#ifdef CMD640_DUMP_REGS
-	cmd640_dump_regs();
-#endif
-
-	/*
-	 * Documented magic begins here
-	 */
-	cfr = get_cmd640_reg(CFR);
-	cmd640_chip_version = cfr & CFR_DEVREV;
-	if (cmd640_chip_version == 0) {
-		printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
-		return 0;
-	}
-
-	rc = cmd640x_init_one(0x1f0, 0x3f6);
-	if (rc)
-		return rc;
-
-	rc = cmd640x_init_one(0x170, 0x376);
-	if (rc) {
-		release_region(0x3f6, 1);
-		release_region(0x1f0, 8);
-		return rc;
-	}
-
-	memset(&hw, 0, sizeof(hw));
-
-	ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
-	hw[0].irq = 14;
-	hw[0].chipset = ide_cmd640;
-
-	ide_std_init_ports(&hw[1], 0x170, 0x376);
-	hw[1].irq = 15;
-	hw[1].chipset = ide_cmd640;
-
-	printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
-			 "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
-
-	/*
-	 * Initialize data for primary port
-	 */
-	hws[0] = &hw[0];
-
-	/*
-	 * Ensure compatibility by always using the slowest timings
-	 * for access to the drive's command register block,
-	 * and reset the prefetch burstsize to default (512 bytes).
-	 *
-	 * Maybe we need a way to NOT do these on *some* systems?
-	 */
-	put_cmd640_reg(CMDTIM, 0);
-	put_cmd640_reg(BRST, 0x40);
-
-	b = get_cmd640_reg(CNTRL);
-
-	/*
-	 * Try to enable the secondary interface, if not already enabled
-	 */
-	if (secondary_port_responding()) {
-		if ((b & CNTRL_ENA_2ND)) {
-			second_port_cmd640 = 1;
-			port2 = "okay";
-		} else if (cmd640_vlb) {
-			second_port_cmd640 = 1;
-			port2 = "alive";
-		} else
-			port2 = "not cmd640";
-	} else {
-		put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
-		if (secondary_port_responding()) {
-			second_port_cmd640 = 1;
-			port2 = "enabled";
-		} else {
-			put_cmd640_reg(CNTRL, b); /* restore original setting */
-			port2 = "not responding";
-		}
-	}
-
-	/*
-	 * Initialize data for secondary cmd640 port, if enabled
-	 */
-	if (second_port_cmd640)
-		hws[1] = &hw[1];
-
-	printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
-			 second_port_cmd640 ? "" : "not ", port2);
-
-#ifdef CMD640_DUMP_REGS
-	cmd640_dump_regs();
-#endif
-
-	return ide_host_add(&cmd640_port_info, hws, NULL);
-}
-
-module_param_named(probe_vlb, cmd640_vlb, bool, 0);
-MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
-
-module_init(cmd640x_init);
-
-MODULE_LICENSE("GPL");