Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 274 insertions, 0 deletions

diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
new file mode 100644
index 000000000000..7dc24682d197
--- /dev/null
+++ b/drivers/ide/pci/cs5520.c
@@ -0,0 +1,274 @@
+/*
+ *	IDE tuning and bus mastering support for the CS5510/CS5520
+ *	chipsets
+ *
+ *	The CS5510/CS5520 are slightly unusual devices. Unlike the 
+ *	typical IDE controllers they do bus mastering with the drive in
+ *	PIO mode and smarter silicon.
+ *
+ *	The practical upshot of this is that we must always tune the
+ *	drive for the right PIO mode. We must also ignore all the blacklists
+ *	and the drive bus mastering DMA information.
+ *
+ *	*** This driver is strictly experimental ***
+ *
+ *	(c) Copyright Red Hat Inc 2002
+ * 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * For the avoidance of doubt the "preferred form" of this code is one which
+ * is in an open non patent encumbered format. Where cryptographic key signing
+ * forms part of the process of creating an executable the information
+ * including keys needed to generate an equivalently functional executable
+ * are deemed to be part of the source code.
+ *
+ */
+ 
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+struct pio_clocks
+{
+	int address;
+	int assert;
+	int recovery;
+};
+
+static struct pio_clocks cs5520_pio_clocks[]={
+	{3, 6, 11},
+	{2, 5, 6},
+	{1, 4, 3},
+	{1, 3, 2},
+	{1, 2, 1}
+};
+
+static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct pci_dev *pdev = hwif->pci_dev;
+	u8 speed = min((u8)XFER_PIO_4, xferspeed);
+	int pio = speed;
+	u8 reg;
+	int controller = drive->dn > 1 ? 1 : 0;
+	int error;
+	
+	switch(speed)
+	{
+		case XFER_PIO_4:
+		case XFER_PIO_3:
+		case XFER_PIO_2:
+		case XFER_PIO_1:
+		case XFER_PIO_0:
+			pio -= XFER_PIO_0;
+			break;
+		default:
+			pio = 0;
+			printk(KERN_ERR "cs55x0: bad ide timing.\n");
+	}
+	
+	printk("PIO clocking = %d\n", pio);
+	
+	/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
+
+	/* 8bit CAT/CRT - 8bit command timing for channel */
+	pci_write_config_byte(pdev, 0x62 + controller, 
+		(cs5520_pio_clocks[pio].recovery << 4) |
+		(cs5520_pio_clocks[pio].assert));
+
+	/* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
+
+	/* FIXME: should these use address ? */
+	/* Data read timing */
+	pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
+		(cs5520_pio_clocks[pio].recovery << 4) |
+		(cs5520_pio_clocks[pio].assert));
+	/* Write command timing */
+	pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
+		(cs5520_pio_clocks[pio].recovery << 4) |
+		(cs5520_pio_clocks[pio].assert));
+		
+	/* Set the DMA enable/disable flag */
+	reg = inb(hwif->dma_base + 0x02 + 8*controller);
+	reg |= 1<<((drive->dn&1)+5);
+	outb(reg, hwif->dma_base + 0x02 + 8*controller);
+		
+	error = ide_config_drive_speed(drive, speed);
+	/* ATAPI is harder so leave it for now */
+	if(!error && drive->media == ide_disk)
+		error = hwif->ide_dma_on(drive);
+
+	return error;
+}	
+	
+static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
+{
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
+}
+
+static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+
+	/* Tune the drive for PIO modes up to PIO 4 */	
+	cs5520_tune_drive(drive, 4);
+	/* Then tell the core to use DMA operations */
+	return hwif->ide_dma_on(drive);
+}
+
+/*
+ *	We provide a callback for our nonstandard DMA location
+ */
+
+static void __devinit cs5520_init_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *hwif)
+{
+	unsigned long bmide = pci_resource_start(dev, 2);	/* Not the usual 4 */
+	if(hwif->mate && hwif->mate->dma_base)	/* Second channel at primary + 8 */
+		bmide += 8;
+	ide_setup_dma(hwif, bmide, 8);
+}
+
+/*
+ *	We wrap the DMA activate to set the vdma flag. This is needed
+ *	so that the IDE DMA layer issues PIO not DMA commands over the
+ *	DMA channel
+ */
+ 
+static int cs5520_dma_on(ide_drive_t *drive)
+{
+	drive->vdma = 1;
+	return 0;
+}
+
+static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
+{
+	hwif->tuneproc = &cs5520_tune_drive;
+	hwif->speedproc = &cs5520_tune_chipset;
+	hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
+	hwif->ide_dma_on = &cs5520_dma_on;
+
+	if(!noautodma)
+		hwif->autodma = 1;
+	
+	if(!hwif->dma_base)
+	{
+		hwif->drives[0].autotune = 1;
+		hwif->drives[1].autotune = 1;
+		return;
+	}
+	
+	hwif->atapi_dma = 0;
+	hwif->ultra_mask = 0;
+	hwif->swdma_mask = 0;
+	hwif->mwdma_mask = 0;
+	
+	hwif->drives[0].autodma = hwif->autodma;
+	hwif->drives[1].autodma = hwif->autodma;
+}
+
+#define DECLARE_CS_DEV(name_str)				\
+	{							\
+		.name		= name_str,			\
+		.init_setup_dma = cs5520_init_setup_dma,	\
+		.init_hwif	= init_hwif_cs5520,		\
+		.channels	= 2,				\
+		.autodma	= AUTODMA,			\
+		.bootable	= ON_BOARD,			\
+		.flags		= IDEPCI_FLAG_ISA_PORTS,	\
+	}
+
+static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
+	/* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
+	/* 1 */ DECLARE_CS_DEV("Cyrix 5520")
+};
+
+/*
+ *	The 5510/5520 are a bit weird. They don't quite set up the way
+ *	the PCI helper layer expects so we must do much of the set up 
+ *	work longhand.
+ */
+ 
+static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	ata_index_t index;
+	ide_pci_device_t *d = &cyrix_chipsets[id->driver_data];
+
+	ide_setup_pci_noise(dev, d);
+
+	/* We must not grab the entire device, it has 'ISA' space in its
+	   BARS too and we will freak out other bits of the kernel */
+	if(pci_enable_device_bars(dev, 1<<2))
+	{
+		printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
+		return 1;
+	}
+	pci_set_master(dev);
+	if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+		printk(KERN_WARNING "cs5520: No suitable DMA available.\n");
+		return -ENODEV;
+	}
+
+	index.all = 0xf0f0;
+
+	/*
+	 *	Now the chipset is configured we can let the core
+	 *	do all the device setup for us
+	 */
+
+	ide_pci_setup_ports(dev, d, 14, &index);
+
+	if((index.b.low & 0xf0) != 0xf0)
+		probe_hwif_init(&ide_hwifs[index.b.low]);
+	if((index.b.high & 0xf0) != 0xf0)
+		probe_hwif_init(&ide_hwifs[index.b.high]);
+	return 0;
+}
+
+static struct pci_device_id cs5520_pci_tbl[] = {
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
+
+static struct pci_driver driver = {
+	.name		= "Cyrix_IDE",
+	.id_table	= cs5520_pci_tbl,
+	.probe		= cs5520_init_one,
+};
+
+static int cs5520_ide_init(void)
+{
+	return ide_pci_register_driver(&driver);
+}
+
+module_init(cs5520_ide_init);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
+MODULE_LICENSE("GPL");