summaryrefslogtreecommitdiff
path: root/drivers/ide/pci/serverworks.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/pci/serverworks.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/pci/serverworks.c')
-rw-r--r--drivers/ide/pci/serverworks.c470
1 files changed, 0 insertions, 470 deletions
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
deleted file mode 100644
index 437bc919dafd..000000000000
--- a/drivers/ide/pci/serverworks.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * Copyright (C) 1998-2000 Michel Aubry
- * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
- * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- * Portions copyright (c) 2001 Sun Microsystems
- *
- *
- * RCC/ServerWorks IDE driver for Linux
- *
- * OSB4: `Open South Bridge' IDE Interface (fn 1)
- * supports UDMA mode 2 (33 MB/s)
- *
- * CSB5: `Champion South Bridge' IDE Interface (fn 1)
- * all revisions support UDMA mode 4 (66 MB/s)
- * revision A2.0 and up support UDMA mode 5 (100 MB/s)
- *
- * *** The CSB5 does not provide ANY register ***
- * *** to detect 80-conductor cable presence. ***
- *
- * CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
- *
- * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
- * controller same as the CSB6. Single channel ATA100 only.
- *
- * Documentation:
- * Available under NDA only. Errata info very hard to get.
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "serverworks"
-
-#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
-#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
-
-/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
- * can overrun their FIFOs when used with the CSB5 */
-static const char *svwks_bad_ata100[] = {
- "ST320011A",
- "ST340016A",
- "ST360021A",
- "ST380021A",
- NULL
-};
-
-static struct pci_dev *isa_dev;
-
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
-{
- char *m = (char *)&drive->id[ATA_ID_PROD];
-
- while (*list)
- if (!strcmp(*list++, m))
- return 1;
- return 0;
-}
-
-static u8 svwks_udma_filter(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 mask = 0;
-
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
- return 0x1f;
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- u32 reg = 0;
- if (isa_dev)
- pci_read_config_dword(isa_dev, 0x64, &reg);
-
- /*
- * Don't enable UDMA on disk devices for the moment
- */
- if(drive->media == ide_disk)
- return 0;
- /* Check the OSB4 DMA33 enable bit */
- return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
- } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
- return 0x07;
- } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) {
- u8 btr = 0, mode;
- pci_read_config_byte(dev, 0x5A, &btr);
- mode = btr & 0x3;
-
- /* If someone decides to do UDMA133 on CSB5 the same
- issue will bite so be inclusive */
- if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100))
- mode = 2;
-
- switch(mode) {
- case 3: mask = 0x3f; break;
- case 2: mask = 0x1f; break;
- case 1: mask = 0x07; break;
- default: mask = 0x00; break;
- }
- }
- if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
- (!(PCI_FUNC(dev->devfn) & 1)))
- mask = 0x1f;
-
- return mask;
-}
-
-static u8 svwks_csb_check (struct pci_dev *dev)
-{
- switch (dev->device) {
- case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
- case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
- return 1;
- default:
- break;
- }
- return 0;
-}
-
-static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
- static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
-
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-
- pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
-
- if (svwks_csb_check(dev)) {
- u16 csb_pio = 0;
-
- pci_read_config_word(dev, 0x4a, &csb_pio);
-
- csb_pio &= ~(0x0f << (4 * drive->dn));
- csb_pio |= (pio << (4 * drive->dn));
-
- pci_write_config_word(dev, 0x4a, csb_pio);
- }
-}
-
-static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
- static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
- static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
-
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 unit = drive->dn & 1;
-
- u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
-
- pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing);
- pci_read_config_byte(dev, 0x54, &ultra_enable);
-
- ultra_timing &= ~(0x0F << (4*unit));
- ultra_enable &= ~(0x01 << drive->dn);
-
- if (speed >= XFER_UDMA_0) {
- dma_timing |= dma_modes[2];
- ultra_timing |= (udma_modes[speed - XFER_UDMA_0] << (4 * unit));
- ultra_enable |= (0x01 << drive->dn);
- } else if (speed >= XFER_MW_DMA_0)
- dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
-
- pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing);
- pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);
- pci_write_config_byte(dev, 0x54, ultra_enable);
-}
-
-static unsigned int init_chipset_svwks(struct pci_dev *dev)
-{
- unsigned int reg;
- u8 btr;
-
- /* force Master Latency Timer value to 64 PCICLKs */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
-
- /* OSB4 : South Bridge and IDE */
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
- if (isa_dev) {
- pci_read_config_dword(isa_dev, 0x64, &reg);
- reg &= ~0x00002000; /* disable 600ns interrupt mask */
- if(!(reg & 0x00004000))
- printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS "
- "enabled.\n", pci_name(dev));
- reg |= 0x00004000; /* enable UDMA/33 support */
- pci_write_config_dword(isa_dev, 0x64, reg);
- }
- }
-
- /* setup CSB5/CSB6 : South Bridge and IDE option RAID */
- else if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
-
- /* Third Channel Test */
- if (!(PCI_FUNC(dev->devfn) & 1)) {
- struct pci_dev * findev = NULL;
- u32 reg4c = 0;
- findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
- if (findev) {
- pci_read_config_dword(findev, 0x4C, &reg4c);
- reg4c &= ~0x000007FF;
- reg4c |= 0x00000040;
- reg4c |= 0x00000020;
- pci_write_config_dword(findev, 0x4C, reg4c);
- pci_dev_put(findev);
- }
- outb_p(0x06, 0x0c00);
- dev->irq = inb_p(0x0c01);
- } else {
- struct pci_dev * findev = NULL;
- u8 reg41 = 0;
-
- findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
- if (findev) {
- pci_read_config_byte(findev, 0x41, &reg41);
- reg41 &= ~0x40;
- pci_write_config_byte(findev, 0x41, reg41);
- pci_dev_put(findev);
- }
- /*
- * This is a device pin issue on CSB6.
- * Since there will be a future raid mode,
- * early versions of the chipset require the
- * interrupt pin to be set, and it is a compatibility
- * mode issue.
- */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
- dev->irq = 0;
- }
-// pci_read_config_dword(dev, 0x40, &pioreg)
-// pci_write_config_dword(dev, 0x40, 0x99999999);
-// pci_read_config_dword(dev, 0x44, &dmareg);
-// pci_write_config_dword(dev, 0x44, 0xFFFFFFFF);
- /* setup the UDMA Control register
- *
- * 1. clear bit 6 to enable DMA
- * 2. enable DMA modes with bits 0-1
- * 00 : legacy
- * 01 : udma2
- * 10 : udma2/udma4
- * 11 : udma2/udma4/udma5
- */
- pci_read_config_byte(dev, 0x5A, &btr);
- btr &= ~0x40;
- if (!(PCI_FUNC(dev->devfn) & 1))
- btr |= 0x2;
- else
- btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
- pci_write_config_byte(dev, 0x5A, btr);
- }
- /* Setup HT1000 SouthBridge Controller - Single Channel Only */
- else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
- pci_read_config_byte(dev, 0x5A, &btr);
- btr &= ~0x40;
- btr |= 0x3;
- pci_write_config_byte(dev, 0x5A, btr);
- }
-
- return dev->irq;
-}
-
-static u8 ata66_svwks_svwks(ide_hwif_t *hwif)
-{
- return ATA_CBL_PATA80;
-}
-
-/* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits
- * of the subsystem device ID indicate presence of an 80-pin cable.
- * Bit 15 clear = secondary IDE channel does not have 80-pin cable.
- * Bit 15 set = secondary IDE channel has 80-pin cable.
- * Bit 14 clear = primary IDE channel does not have 80-pin cable.
- * Bit 14 set = primary IDE channel has 80-pin cable.
- */
-static u8 ata66_svwks_dell(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
- dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE))
- return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- return ATA_CBL_PATA40;
-}
-
-/* Sun Cobalt Alpine hardware avoids the 80-pin cable
- * detect issue by attaching the drives directly to the board.
- * This check follows the Dell precedent (how scary is that?!)
- *
- * WARNING: this only works on Alpine hardware!
- */
-static u8 ata66_svwks_cobalt(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
- dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
- return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- return ATA_CBL_PATA40;
-}
-
-static u8 svwks_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- /* Server Works */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS)
- return ata66_svwks_svwks (hwif);
-
- /* Dell PowerEdge */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL)
- return ata66_svwks_dell (hwif);
-
- /* Cobalt Alpine */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN)
- return ata66_svwks_cobalt (hwif);
-
- /* Per Specified Design by OEM, and ASIC Architect */
- if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2))
- return ATA_CBL_PATA80;
-
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops osb4_port_ops = {
- .set_pio_mode = svwks_set_pio_mode,
- .set_dma_mode = svwks_set_dma_mode,
- .udma_filter = svwks_udma_filter,
-};
-
-static const struct ide_port_ops svwks_port_ops = {
- .set_pio_mode = svwks_set_pio_mode,
- .set_dma_mode = svwks_set_dma_mode,
- .udma_filter = svwks_udma_filter,
- .cable_detect = svwks_cable_detect,
-};
-
-#define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS
-
-static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
- { /* 0: OSB4 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &osb4_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = 0x00, /* UDMA is problematic on OSB4 */
- },
- { /* 1: CSB5 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 2: CSB6 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 3: CSB6-2 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 4: HT1000 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- }
-};
-
-/**
- * svwks_init_one - called when a OSB/CSB is found
- * @dev: the svwks device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d;
- u8 idx = id->driver_data;
-
- d = serverworks_chipsets[idx];
-
- if (idx == 1)
- d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
- else if (idx == 2 || idx == 3) {
- if ((PCI_FUNC(dev->devfn) & 1) == 0) {
- if (pci_resource_start(dev, 0) != 0x01f1)
- d.host_flags |= IDE_HFLAG_NON_BOOTABLE;
- d.host_flags |= IDE_HFLAG_SINGLE;
- } else
- d.host_flags &= ~IDE_HFLAG_SINGLE;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id svwks_pci_tbl[] = {
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
-
-static struct pci_driver svwks_pci_driver = {
- .name = "Serverworks_IDE",
- .id_table = svwks_pci_tbl,
- .probe = svwks_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init svwks_ide_init(void)
-{
- return ide_pci_register_driver(&svwks_pci_driver);
-}
-
-static void __exit svwks_ide_exit(void)
-{
- pci_unregister_driver(&svwks_pci_driver);
-}
-
-module_init(svwks_ide_init);
-module_exit(svwks_ide_exit);
-
-MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE");
-MODULE_LICENSE("GPL");