Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits)
  ide: use only ->set_pio_mode method for programming PIO modes (take 2)
  sis5513: don't change UDMA settings when programming PIO
  it8213/piix/slc90e66: don't change DMA settings when programming PIO
  alim15x3: PIO mode setup fixes
  siimage: fix ->set_pio_mode method to select PIO data transfer
  cs5520: don't enable VDMA in ->speedproc
  sc1200: remove redundant warning message from sc1200_tune_chipset()
  ide-pmac: PIO mode setup fixes (take 3)
  icside: fix ->speedproc to return on unsupported modes (take 5)
  sgiioc4: use ide_tune_dma()
  amd74xx/via82cxxx: use ide_tune_dma()
  ide: add ide_set{_max}_pio() (take 4)
  ide: Kconfig face-lift
  ide: move ide_rate_filter() calls to the upper layer (take 2)
  sis5513: add ->udma_filter method for chipset_family >= ATA_133
  ide: mode limiting fixes for user requested speed changes
  ide: add missing ide_rate_filter() calls to ->speedproc()-s
  ide: call udma_filter() before resorting to the UltraDMA mask
  ide: make jmicron match vendor and device class
  pdc202xx_new: switch to using pci_get_slot() (take 2)
  ...

1 files changed, 4 insertions, 11 deletions

diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 9fead2e7d4c8..0351cf210427 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -145,7 +145,7 @@ static void svwks_tune_pio(ide_drive_t *drive, const u8 pio)
 	}
 }
 
-static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed)
 {
 	static const u8 udma_modes[]		= { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
 	static const u8 dma_modes[]		= { 0x77, 0x21, 0x20 };
@@ -153,16 +153,10 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
-	u8 speed		= ide_rate_filter(drive, xferspeed);
 	u8 unit			= (drive->select.b.unit & 0x01);
 
 	u8 ultra_enable	 = 0, ultra_timing = 0, dma_timing = 0;
 
-	if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
-		svwks_tune_pio(drive, speed - XFER_PIO_0);
-		return ide_config_drive_speed(drive, speed);
-	}
-
 	/* If we are about to put a disk into UDMA mode we screwed up.
 	   Our code assumes we never _ever_ do this on an OSB4 */
 	   
@@ -203,9 +197,8 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 	return (ide_config_drive_speed(drive, speed));
 }
 
-static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
+static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-	pio = ide_get_best_pio_mode(drive, pio, 4);
 	svwks_tune_pio(drive, pio);
 	(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
@@ -218,7 +211,7 @@ static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
 		return 0;
 
 	if (ide_use_fast_pio(drive))
-		svwks_tune_drive(drive, 255);
+		ide_set_max_pio(drive);
 
 	return -1;
 }
@@ -390,7 +383,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
 	if (!hwif->irq)
 		hwif->irq = hwif->channel ? 15 : 14;
 
-	hwif->tuneproc = &svwks_tune_drive;
+	hwif->set_pio_mode = &svwks_set_pio_mode;
 	hwif->speedproc = &svwks_tune_chipset;
 	hwif->udma_filter = &svwks_udma_filter;