ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 857 deletions

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
deleted file mode 100644
index eb4faf92c571..000000000000
--- a/drivers/ide/pci/siimage.c
+++ /dev/null
@@ -1,857 +0,0 @@
-/*
- * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003		Red Hat <alan@redhat.com>
- * Copyright (C) 2007-2008	MontaVista Software, Inc.
- * Copyright (C) 2007-2008	Bartlomiej Zolnierkiewicz
- *
- *  May be copied or modified under the terms of the GNU General Public License
- *
- *  Documentation for CMD680:
- *  http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
- *
- *  Documentation for SiI 3112:
- *  http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
- *
- *  Errata and other documentation only available under NDA.
- *
- *
- *  FAQ Items:
- *	If you are using Marvell SATA-IDE adapters with Maxtor drives
- *	ensure the system is set up for ATA100/UDMA5, not UDMA6.
- *
- *	If you are using WD drives with SATA bridges you must set the
- *	drive to "Single". "Master" will hang.
- *
- *	If you have strange problems with nVidia chipset systems please
- *	see the SI support documentation and update your system BIOS
- *	if necessary
- *
- *  The Dell DRAC4 has some interesting features including effectively hot
- *  unplugging/replugging the virtual CD interface when the DRAC is reset.
- *  This often causes drivers/ide/siimage to panic but is ok with the rather
- *  smarter code in libata.
- *
- * TODO:
- * - IORDY fixes
- * - VDMA support
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define DRV_NAME "siimage"
-
-/**
- *	pdev_is_sata		-	check if device is SATA
- *	@pdev:	PCI device to check
- *
- *	Returns true if this is a SATA controller
- */
-
-static int pdev_is_sata(struct pci_dev *pdev)
-{
-#ifdef CONFIG_BLK_DEV_IDE_SATA
-	switch (pdev->device) {
-	case PCI_DEVICE_ID_SII_3112:
-	case PCI_DEVICE_ID_SII_1210SA:
-		return 1;
-	case PCI_DEVICE_ID_SII_680:
-		return 0;
-	}
-	BUG();
-#endif
-	return 0;
-}
-
-/**
- *	is_sata			-	check if hwif is SATA
- *	@hwif:	interface to check
- *
- *	Returns true if this is a SATA controller
- */
-
-static inline int is_sata(ide_hwif_t *hwif)
-{
-	return pdev_is_sata(to_pci_dev(hwif->dev));
-}
-
-/**
- *	siimage_selreg		-	return register base
- *	@hwif: interface
- *	@r: config offset
- *
- *	Turn a config register offset into the right address in either
- *	PCI space or MMIO space to access the control register in question
- *	Thankfully this is a configuration operation, so isn't performance
- *	critical.
- */
-
-static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
-{
-	unsigned long base = (unsigned long)hwif->hwif_data;
-
-	base += 0xA0 + r;
-	if (hwif->host_flags & IDE_HFLAG_MMIO)
-		base += hwif->channel << 6;
-	else
-		base += hwif->channel << 4;
-	return base;
-}
-
-/**
- *	siimage_seldev		-	return register base
- *	@hwif: interface
- *	@r: config offset
- *
- *	Turn a config register offset into the right address in either
- *	PCI space or MMIO space to access the control register in question
- *	including accounting for the unit shift.
- */
-
-static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u8 unit			= drive->dn & 1;
-
-	base += 0xA0 + r;
-	if (hwif->host_flags & IDE_HFLAG_MMIO)
-		base += hwif->channel << 6;
-	else
-		base += hwif->channel << 4;
-	base |= unit << unit;
-	return base;
-}
-
-static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	u8 tmp = 0;
-
-	if (host->host_priv)
-		tmp = readb((void __iomem *)addr);
-	else
-		pci_read_config_byte(dev, addr, &tmp);
-
-	return tmp;
-}
-
-static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	u16 tmp = 0;
-
-	if (host->host_priv)
-		tmp = readw((void __iomem *)addr);
-	else
-		pci_read_config_word(dev, addr, &tmp);
-
-	return tmp;
-}
-
-static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	if (host->host_priv)
-		writeb(val, (void __iomem *)addr);
-	else
-		pci_write_config_byte(dev, addr, val);
-}
-
-static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	if (host->host_priv)
-		writew(val, (void __iomem *)addr);
-	else
-		pci_write_config_word(dev, addr, val);
-}
-
-static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	if (host->host_priv)
-		writel(val, (void __iomem *)addr);
-	else
-		pci_write_config_dword(dev, addr, val);
-}
-
-/**
- *	sil_udma_filter		-	compute UDMA mask
- *	@drive: IDE device
- *
- *	Compute the available UDMA speeds for the device on the interface.
- *
- *	For the CMD680 this depends on the clocking mode (scsc), for the
- *	SI3112 SATA controller life is a bit simpler.
- */
-
-static u8 sil_pata_udma_filter(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u8 scsc, mask		= 0;
-
-	base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
-
-	scsc = sil_ioread8(dev, base);
-
-	switch (scsc & 0x30) {
-	case 0x10:	/* 133 */
-		mask = ATA_UDMA6;
-		break;
-	case 0x20:	/* 2xPCI */
-		mask = ATA_UDMA6;
-		break;
-	case 0x00:	/* 100 */
-		mask = ATA_UDMA5;
-		break;
-	default: 	/* Disabled ? */
-		BUG();
-	}
-
-	return mask;
-}
-
-static u8 sil_sata_udma_filter(ide_drive_t *drive)
-{
-	char *m = (char *)&drive->id[ATA_ID_PROD];
-
-	return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
-}
-
-/**
- *	sil_set_pio_mode	-	set host controller for PIO mode
- *	@drive: drive
- *	@pio: PIO mode number
- *
- *	Load the timing settings for this device mode into the
- *	controller. If we are in PIO mode 3 or 4 turn on IORDY
- *	monitoring (bit 9). The TF timing is bits 31:16
- */
-
-static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
-{
-	static const u16 tf_speed[]   = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
-	static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
-
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	ide_drive_t *pair	= ide_get_pair_dev(drive);
-	u32 speedt		= 0;
-	u16 speedp		= 0;
-	unsigned long addr	= siimage_seldev(drive, 0x04);
-	unsigned long tfaddr	= siimage_selreg(hwif,	0x02);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u8 tf_pio		= pio;
-	u8 mmio			= (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-	u8 addr_mask		= hwif->channel ? (mmio ? 0xF4 : 0x84)
-						: (mmio ? 0xB4 : 0x80);
-	u8 mode			= 0;
-	u8 unit			= drive->dn & 1;
-
-	/* trim *taskfile* PIO to the slowest of the master/slave */
-	if (pair) {
-		u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
-
-		if (pair_pio < tf_pio)
-			tf_pio = pair_pio;
-	}
-
-	/* cheat for now and use the docs */
-	speedp = data_speed[pio];
-	speedt = tf_speed[tf_pio];
-
-	sil_iowrite16(dev, speedp, addr);
-	sil_iowrite16(dev, speedt, tfaddr);
-
-	/* now set up IORDY */
-	speedp = sil_ioread16(dev, tfaddr - 2);
-	speedp &= ~0x200;
-	if (pio > 2)
-		speedp |= 0x200;
-	sil_iowrite16(dev, speedp, tfaddr - 2);
-
-	mode = sil_ioread8(dev, base + addr_mask);
-	mode &= ~(unit ? 0x30 : 0x03);
-	mode |= unit ? 0x10 : 0x01;
-	sil_iowrite8(dev, mode, base + addr_mask);
-}
-
-/**
- *	sil_set_dma_mode	-	set host controller for DMA mode
- *	@drive: drive
- *	@speed: DMA mode
- *
- *	Tune the SiI chipset for the desired DMA mode.
- */
-
-static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-	static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
-	static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
-	static const u16 dma[]	 = { 0x2208, 0x10C2, 0x10C1 };
-
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u16 ultra = 0, multi	= 0;
-	u8 mode = 0, unit	= drive->dn & 1;
-	u8 mmio			= (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-	u8 scsc = 0, addr_mask	= hwif->channel ? (mmio ? 0xF4 : 0x84)
-						: (mmio ? 0xB4 : 0x80);
-	unsigned long ma	= siimage_seldev(drive, 0x08);
-	unsigned long ua	= siimage_seldev(drive, 0x0C);
-
-	scsc  = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
-	mode  = sil_ioread8 (dev, base + addr_mask);
-	multi = sil_ioread16(dev, ma);
-	ultra = sil_ioread16(dev, ua);
-
-	mode  &= ~(unit ? 0x30 : 0x03);
-	ultra &= ~0x3F;
-	scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
-
-	scsc = is_sata(hwif) ? 1 : scsc;
-
-	if (speed >= XFER_UDMA_0) {
-		multi  = dma[2];
-		ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
-				ultra5[speed - XFER_UDMA_0];
-		mode  |= unit ? 0x30 : 0x03;
-	} else {
-		multi = dma[speed - XFER_MW_DMA_0];
-		mode |= unit ? 0x20 : 0x02;
-	}
-
-	sil_iowrite8 (dev, mode, base + addr_mask);
-	sil_iowrite16(dev, multi, ma);
-	sil_iowrite16(dev, ultra, ua);
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int siimage_io_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 dma_altstat		= 0;
-	unsigned long addr	= siimage_selreg(hwif, 1);
-
-	/* return 1 if INTR asserted */
-	if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
-		return 1;
-
-	/* return 1 if Device INTR asserted */
-	pci_read_config_byte(dev, addr, &dma_altstat);
-	if (dma_altstat & 8)
-		return 0;	/* return 1; */
-
-	return 0;
-}
-
-/**
- *	siimage_mmio_dma_test_irq	-	check we caused an IRQ
- *	@drive: drive we are testing
- *
- *	Check if we caused an IDE DMA interrupt. We may also have caused
- *	SATA status interrupts, if so we clean them up and continue.
- */
-
-static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long addr	= siimage_selreg(hwif, 0x1);
-	void __iomem *sata_error_addr
-		= (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
-
-	if (sata_error_addr) {
-		unsigned long base	= (unsigned long)hwif->hwif_data;
-		u32 ext_stat		= readl((void __iomem *)(base + 0x10));
-		u8 watchdog		= 0;
-
-		if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
-			u32 sata_error = readl(sata_error_addr);
-
-			writel(sata_error, sata_error_addr);
-			watchdog = (sata_error & 0x00680000) ? 1 : 0;
-			printk(KERN_WARNING "%s: sata_error = 0x%08x, "
-				"watchdog = %d, %s\n",
-				drive->name, sata_error, watchdog, __func__);
-		} else
-			watchdog = (ext_stat & 0x8000) ? 1 : 0;
-
-		ext_stat >>= 16;
-		if (!(ext_stat & 0x0404) && !watchdog)
-			return 0;
-	}
-
-	/* return 1 if INTR asserted */
-	if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
-		return 1;
-
-	/* return 1 if Device INTR asserted */
-	if (readb((void __iomem *)addr) & 8)
-		return 0;	/* return 1; */
-
-	return 0;
-}
-
-static int siimage_dma_test_irq(ide_drive_t *drive)
-{
-	if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
-		return siimage_mmio_dma_test_irq(drive);
-	else
-		return siimage_io_dma_test_irq(drive);
-}
-
-/**
- *	sil_sata_reset_poll	-	wait for SATA reset
- *	@drive: drive we are resetting
- *
- *	Poll the SATA phy and see whether it has come back from the dead
- *	yet.
- */
-
-static int sil_sata_reset_poll(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	void __iomem *sata_status_addr
-		= (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
-
-	if (sata_status_addr) {
-		/* SATA Status is available only when in MMIO mode */
-		u32 sata_stat = readl(sata_status_addr);
-
-		if ((sata_stat & 0x03) != 0x03) {
-			printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
-					    hwif->name, sata_stat);
-			return -ENXIO;
-		}
-	}
-
-	return 0;
-}
-
-/**
- *	sil_sata_pre_reset	-	reset hook
- *	@drive: IDE device being reset
- *
- *	For the SATA devices we need to handle recalibration/geometry
- *	differently
- */
-
-static void sil_sata_pre_reset(ide_drive_t *drive)
-{
-	if (drive->media == ide_disk) {
-		drive->special.b.set_geometry = 0;
-		drive->special.b.recalibrate = 0;
-	}
-}
-
-/**
- *	init_chipset_siimage	-	set up an SI device
- *	@dev: PCI device
- *
- *	Perform the initial PCI set up for this device. Attempt to switch
- *	to 133 MHz clocking if the system isn't already set up to do it.
- */
-
-static unsigned int init_chipset_siimage(struct pci_dev *dev)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	void __iomem *ioaddr = host->host_priv;
-	unsigned long base, scsc_addr;
-	u8 rev = dev->revision, tmp;
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
-
-	if (ioaddr)
-		pci_set_master(dev);
-
-	base = (unsigned long)ioaddr;
-
-	if (ioaddr && pdev_is_sata(dev)) {
-		u32 tmp32, irq_mask;
-
-		/* make sure IDE0/1 interrupts are not masked */
-		irq_mask = (1 << 22) | (1 << 23);
-		tmp32 = readl(ioaddr + 0x48);
-		if (tmp32 & irq_mask) {
-			tmp32 &= ~irq_mask;
-			writel(tmp32, ioaddr + 0x48);
-			readl(ioaddr + 0x48); /* flush */
-		}
-		writel(0, ioaddr + 0x148);
-		writel(0, ioaddr + 0x1C8);
-	}
-
-	sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
-	sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
-
-	scsc_addr = base ? (base + 0x4A) : 0x8A;
-	tmp = sil_ioread8(dev, scsc_addr);
-
-	switch (tmp & 0x30) {
-	case 0x00:
-		/* On 100 MHz clocking, try and switch to 133 MHz */
-		sil_iowrite8(dev, tmp | 0x10, scsc_addr);
-		break;
-	case 0x30:
-		/* Clocking is disabled, attempt to force 133MHz clocking. */
-		sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
-	case 0x10:
-		/* On 133Mhz clocking. */
-		break;
-	case 0x20:
-		/* On PCIx2 clocking. */
-		break;
-	}
-
-	tmp = sil_ioread8(dev, scsc_addr);
-
-	sil_iowrite8 (dev,       0x72, base + 0xA1);
-	sil_iowrite16(dev,     0x328A, base + 0xA2);
-	sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
-	sil_iowrite32(dev, 0x43924392, base + 0xA8);
-	sil_iowrite32(dev, 0x40094009, base + 0xAC);
-	sil_iowrite8 (dev,       0x72, base ? (base + 0xE1) : 0xB1);
-	sil_iowrite16(dev,     0x328A, base ? (base + 0xE2) : 0xB2);
-	sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
-	sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
-	sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
-
-	if (base && pdev_is_sata(dev)) {
-		writel(0xFFFF0000, ioaddr + 0x108);
-		writel(0xFFFF0000, ioaddr + 0x188);
-		writel(0x00680000, ioaddr + 0x148);
-		writel(0x00680000, ioaddr + 0x1C8);
-	}
-
-	/* report the clocking mode of the controller */
-	if (!pdev_is_sata(dev)) {
-		static const char *clk_str[] =
-			{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };
-
-		tmp >>= 4;
-		printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
-			pci_name(dev), clk_str[tmp & 3]);
-	}
-
-	return 0;
-}
-
-/**
- *	init_mmio_iops_siimage	-	set up the iops for MMIO
- *	@hwif: interface to set up
- *
- *	The basic setup here is fairly simple, we can use standard MMIO
- *	operations. However we do have to set the taskfile register offsets
- *	by hand as there isn't a standard defined layout for them this time.
- *
- *	The hardware supports buffered taskfiles and also some rather nice
- *	extended PRD tables. For better SI3112 support use the libata driver
- */
-
-static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	void *addr		= host->host_priv;
-	u8 ch			= hwif->channel;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	unsigned long base;
-
-	/*
-	 *	Fill in the basic hwif bits
-	 */
-	hwif->host_flags |= IDE_HFLAG_MMIO;
-
-	hwif->hwif_data	= addr;
-
-	/*
-	 *	Now set up the hw. We have to do this ourselves as the
-	 *	MMIO layout isn't the same as the standard port based I/O.
-	 */
-	memset(io_ports, 0, sizeof(*io_ports));
-
-	base = (unsigned long)addr;
-	if (ch)
-		base += 0xC0;
-	else
-		base += 0x80;
-
-	/*
-	 *	The buffered task file doesn't have status/control, so we
-	 *	can't currently use it sanely since we want to use LBA48 mode.
-	 */
-	io_ports->data_addr	= base;
-	io_ports->error_addr	= base + 1;
-	io_ports->nsect_addr	= base + 2;
-	io_ports->lbal_addr	= base + 3;
-	io_ports->lbam_addr	= base + 4;
-	io_ports->lbah_addr	= base + 5;
-	io_ports->device_addr	= base + 6;
-	io_ports->status_addr	= base + 7;
-	io_ports->ctl_addr	= base + 10;
-
-	if (pdev_is_sata(dev)) {
-		base = (unsigned long)addr;
-		if (ch)
-			base += 0x80;
-		hwif->sata_scr[SATA_STATUS_OFFSET]	= base + 0x104;
-		hwif->sata_scr[SATA_ERROR_OFFSET]	= base + 0x108;
-		hwif->sata_scr[SATA_CONTROL_OFFSET]	= base + 0x100;
-	}
-
-	hwif->irq = dev->irq;
-
-	hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
-}
-
-static int is_dev_seagate_sata(ide_drive_t *drive)
-{
-	const char *s	= (const char *)&drive->id[ATA_ID_PROD];
-	unsigned len	= strnlen(s, ATA_ID_PROD_LEN);
-
-	if ((len > 4) && (!memcmp(s, "ST", 2)))
-		if ((!memcmp(s + len - 2, "AS", 2)) ||
-		    (!memcmp(s + len - 3, "ASL", 3))) {
-			printk(KERN_INFO "%s: applying pessimistic Seagate "
-					 "errata fix\n", drive->name);
-			return 1;
-		}
-
-	return 0;
-}
-
-/**
- *	sil_quirkproc		-	post probe fixups
- *	@drive: drive
- *
- *	Called after drive probe we use this to decide whether the
- *	Seagate fixup must be applied. This used to be in init_iops but
- *	that can occur before we know what drives are present.
- */
-
-static void sil_quirkproc(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	/* Try and rise the rqsize */
-	if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
-		hwif->rqsize = 128;
-}
-
-/**
- *	init_iops_siimage	-	set up iops
- *	@hwif: interface to set up
- *
- *	Do the basic setup for the SIIMAGE hardware interface
- *	and then do the MMIO setup if we can. This is the first
- *	look in we get for setting up the hwif so that we
- *	can get the iops right before using them.
- */
-
-static void __devinit init_iops_siimage(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	hwif->hwif_data = NULL;
-
-	/* Pessimal until we finish probing */
-	hwif->rqsize = 15;
-
-	if (host->host_priv)
-		init_mmio_iops_siimage(hwif);
-}
-
-/**
- *	sil_cable_detect	-	cable detection
- *	@hwif: interface to check
- *
- *	Check for the presence of an ATA66 capable cable on the interface.
- */
-
-static u8 sil_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	unsigned long addr	= siimage_selreg(hwif, 0);
-	u8 ata66		= sil_ioread8(dev, addr);
-
-	return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops sil_pata_port_ops = {
-	.set_pio_mode		= sil_set_pio_mode,
-	.set_dma_mode		= sil_set_dma_mode,
-	.quirkproc		= sil_quirkproc,
-	.udma_filter		= sil_pata_udma_filter,
-	.cable_detect		= sil_cable_detect,
-};
-
-static const struct ide_port_ops sil_sata_port_ops = {
-	.set_pio_mode		= sil_set_pio_mode,
-	.set_dma_mode		= sil_set_dma_mode,
-	.reset_poll		= sil_sata_reset_poll,
-	.pre_reset		= sil_sata_pre_reset,
-	.quirkproc		= sil_quirkproc,
-	.udma_filter		= sil_sata_udma_filter,
-	.cable_detect		= sil_cable_detect,
-};
-
-static const struct ide_dma_ops sil_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= siimage_dma_test_irq,
-	.dma_timeout		= ide_dma_timeout,
-	.dma_lost_irq		= ide_dma_lost_irq,
-};
-
-#define DECLARE_SII_DEV(p_ops)				\
-	{						\
-		.name		= DRV_NAME,		\
-		.init_chipset	= init_chipset_siimage,	\
-		.init_iops	= init_iops_siimage,	\
-		.port_ops	= p_ops,		\
-		.dma_ops	= &sil_dma_ops,		\
-		.pio_mask	= ATA_PIO4,		\
-		.mwdma_mask	= ATA_MWDMA2,		\
-		.udma_mask	= ATA_UDMA6,		\
-	}
-
-static const struct ide_port_info siimage_chipsets[] __devinitdata = {
-	/* 0: SiI680 */  DECLARE_SII_DEV(&sil_pata_port_ops),
-	/* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
-};
-
-/**
- *	siimage_init_one	-	PCI layer discovery entry
- *	@dev: PCI device
- *	@id: ident table entry
- *
- *	Called by the PCI code when it finds an SiI680 or SiI3112 controller.
- *	We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit siimage_init_one(struct pci_dev *dev,
-				      const struct pci_device_id *id)
-{
-	void __iomem *ioaddr = NULL;
-	resource_size_t bar5 = pci_resource_start(dev, 5);
-	unsigned long barsize = pci_resource_len(dev, 5);
-	int rc;
-	struct ide_port_info d;
-	u8 idx = id->driver_data;
-	u8 BA5_EN;
-
-	d = siimage_chipsets[idx];
-
-	if (idx) {
-		static int first = 1;
-
-		if (first) {
-			printk(KERN_INFO DRV_NAME ": For full SATA support you "
-				"should use the libata sata_sil module.\n");
-			first = 0;
-		}
-
-		d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-	}
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	pci_read_config_byte(dev, 0x8A, &BA5_EN);
-	if ((BA5_EN & 0x01) || bar5) {
-		/*
-		* Drop back to PIO if we can't map the MMIO. Some systems
-		* seem to get terminally confused in the PCI spaces.
-		*/
-		if (!request_mem_region(bar5, barsize, d.name)) {
-			printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
-				"available\n", pci_name(dev));
-		} else {
-			ioaddr = ioremap(bar5, barsize);
-			if (ioaddr == NULL)
-				release_mem_region(bar5, barsize);
-		}
-	}
-
-	rc = ide_pci_init_one(dev, &d, ioaddr);
-	if (rc) {
-		if (ioaddr) {
-			iounmap(ioaddr);
-			release_mem_region(bar5, barsize);
-		}
-		pci_disable_device(dev);
-	}
-
-	return rc;
-}
-
-static void __devexit siimage_remove(struct pci_dev *dev)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	void __iomem *ioaddr = host->host_priv;
-
-	ide_pci_remove(dev);
-
-	if (ioaddr) {
-		resource_size_t bar5 = pci_resource_start(dev, 5);
-		unsigned long barsize = pci_resource_len(dev, 5);
-
-		iounmap(ioaddr);
-		release_mem_region(bar5, barsize);
-	}
-
-	pci_disable_device(dev);
-}
-
-static const struct pci_device_id siimage_pci_tbl[] = {
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680),    0 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112),   1 },
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
-#endif
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
-
-static struct pci_driver siimage_pci_driver = {
-	.name		= "SiI_IDE",
-	.id_table	= siimage_pci_tbl,
-	.probe		= siimage_init_one,
-	.remove		= __devexit_p(siimage_remove),
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init siimage_ide_init(void)
-{
-	return ide_pci_register_driver(&siimage_pci_driver);
-}
-
-static void __exit siimage_ide_exit(void)
-{
-	pci_unregister_driver(&siimage_pci_driver);
-}
-
-module_init(siimage_ide_init);
-module_exit(siimage_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for SiI IDE");
-MODULE_LICENSE("GPL");