diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/pci/sl82c105.c |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/ide/pci/sl82c105.c')
-rw-r--r-- | drivers/ide/pci/sl82c105.c | 516 |
1 files changed, 516 insertions, 0 deletions
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c new file mode 100644 index 000000000000..1d970a0de21a --- /dev/null +++ b/drivers/ide/pci/sl82c105.c @@ -0,0 +1,516 @@ +/* + * linux/drivers/ide/pci/sl82c105.c + * + * SL82C105/Winbond 553 IDE driver + * + * Maintainer unknown. + * + * Drive tuning added from Rebel.com's kernel sources + * -- Russell King (15/11/98) linux@arm.linux.org.uk + * + * Merge in Russell's HW workarounds, fix various problems + * with the timing registers setup. + * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/ide.h> + +#include <asm/io.h> +#include <asm/dma.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(arg) printk arg +#else +#define DBG(fmt,...) +#endif +/* + * SL82C105 PCI config register 0x40 bits. + */ +#define CTRL_IDE_IRQB (1 << 30) +#define CTRL_IDE_IRQA (1 << 28) +#define CTRL_LEGIRQ (1 << 11) +#define CTRL_P1F16 (1 << 5) +#define CTRL_P1EN (1 << 4) +#define CTRL_P0F16 (1 << 1) +#define CTRL_P0EN (1 << 0) + +/* + * Convert a PIO mode and cycle time to the required on/off + * times for the interface. This has protection against run-away + * timings. + */ +static unsigned int get_timing_sl82c105(ide_pio_data_t *p) +{ + unsigned int cmd_on; + unsigned int cmd_off; + + cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30; + cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30; + + if (cmd_on > 32) + cmd_on = 32; + if (cmd_on == 0) + cmd_on = 1; + + if (cmd_off > 32) + cmd_off = 32; + if (cmd_off == 0) + cmd_off = 1; + + return (cmd_on - 1) << 8 | (cmd_off - 1) | (p->use_iordy ? 0x40 : 0x00); +} + +/* + * Configure the drive and chipset for PIO + */ +static void config_for_pio(ide_drive_t *drive, int pio, int report, int chipset_only) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + ide_pio_data_t p; + u16 drv_ctrl = 0x909; + unsigned int xfer_mode, reg; + + DBG(("config_for_pio(drive:%s, pio:%d, report:%d, chipset_only:%d)\n", + drive->name, pio, report, chipset_only)); + + reg = (hwif->channel ? 0x4c : 0x44) + (drive->select.b.unit ? 4 : 0); + + pio = ide_get_best_pio_mode(drive, pio, 5, &p); + + xfer_mode = XFER_PIO_0 + pio; + + if (chipset_only || ide_config_drive_speed(drive, xfer_mode) == 0) { + drv_ctrl = get_timing_sl82c105(&p); + drive->pio_speed = xfer_mode; + } else + drive->pio_speed = XFER_PIO_0; + + if (drive->using_dma == 0) { + /* + * If we are actually using MW DMA, then we can not + * reprogram the interface drive control register. + */ + pci_write_config_word(dev, reg, drv_ctrl); + pci_read_config_word(dev, reg, &drv_ctrl); + + if (report) { + printk("%s: selected %s (%dns) (%04X)\n", drive->name, + ide_xfer_verbose(xfer_mode), p.cycle_time, drv_ctrl); + } + } +} + +/* + * Configure the drive and the chipset for DMA + */ +static int config_for_dma (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + unsigned int reg; + + DBG(("config_for_dma(drive:%s)\n", drive->name)); + + reg = (hwif->channel ? 0x4c : 0x44) + (drive->select.b.unit ? 4 : 0); + + if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) + return 1; + + pci_write_config_word(dev, reg, 0x0240); + + return 0; +} + +/* + * Check to see if the drive and + * chipset is capable of DMA mode + */ + +static int sl82c105_check_drive (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + + DBG(("sl82c105_check_drive(drive:%s)\n", drive->name)); + + do { + struct hd_driveid *id = drive->id; + + if (!drive->autodma) + break; + + if (!id || !(id->capability & 1)) + break; + + /* Consult the list of known "bad" drives */ + if (__ide_dma_bad_drive(drive)) + break; + + if (id->field_valid & 2) { + if ((id->dma_mword & hwif->mwdma_mask) || + (id->dma_1word & hwif->swdma_mask)) + return hwif->ide_dma_on(drive); + } + + if (__ide_dma_good_drive(drive)) + return hwif->ide_dma_on(drive); + } while (0); + + return hwif->ide_dma_off_quietly(drive); +} + +/* + * The SL82C105 holds off all IDE interrupts while in DMA mode until + * all DMA activity is completed. Sometimes this causes problems (eg, + * when the drive wants to report an error condition). + * + * 0x7e is a "chip testing" register. Bit 2 resets the DMA controller + * state machine. We need to kick this to work around various bugs. + */ +static inline void sl82c105_reset_host(struct pci_dev *dev) +{ + u16 val; + + pci_read_config_word(dev, 0x7e, &val); + pci_write_config_word(dev, 0x7e, val | (1 << 2)); + pci_write_config_word(dev, 0x7e, val & ~(1 << 2)); +} + +/* + * If we get an IRQ timeout, it might be that the DMA state machine + * got confused. Fix from Todd Inglett. Details from Winbond. + * + * This function is called when the IDE timer expires, the drive + * indicates that it is READY, and we were waiting for DMA to complete. + */ +static int sl82c105_ide_dma_lost_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; + unsigned long dma_base = hwif->dma_base; + + printk("sl82c105: lost IRQ: resetting host\n"); + + /* + * Check the raw interrupt from the drive. + */ + pci_read_config_dword(dev, 0x40, &val); + if (val & mask) + printk("sl82c105: drive was requesting IRQ, but host lost it\n"); + + /* + * Was DMA enabled? If so, disable it - we're resetting the + * host. The IDE layer will be handling the drive for us. + */ + val = hwif->INB(dma_base); + if (val & 1) { + outb(val & ~1, dma_base); + printk("sl82c105: DMA was enabled\n"); + } + + sl82c105_reset_host(dev); + + /* ide_dmaproc would return 1, so we do as well */ + return 1; +} + +/* + * ATAPI devices can cause the SL82C105 DMA state machine to go gaga. + * Winbond recommend that the DMA state machine is reset prior to + * setting the bus master DMA enable bit. + * + * The generic IDE core will have disabled the BMEN bit before this + * function is called. + */ +static void sl82c105_ide_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + sl82c105_reset_host(dev); + ide_dma_start(drive); +} + +static int sl82c105_ide_dma_timeout(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + DBG(("sl82c105_ide_dma_timeout(drive:%s)\n", drive->name)); + + sl82c105_reset_host(dev); + return __ide_dma_timeout(drive); +} + +static int sl82c105_ide_dma_on (ide_drive_t *drive) +{ + DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name)); + + if (config_for_dma(drive)) { + config_for_pio(drive, 4, 0, 0); + return HWIF(drive)->ide_dma_off_quietly(drive); + } + printk(KERN_INFO "%s: DMA enabled\n", drive->name); + return __ide_dma_on(drive); +} + +static int sl82c105_ide_dma_off_quietly (ide_drive_t *drive) +{ + u8 speed = XFER_PIO_0; + int rc; + + DBG(("sl82c105_ide_dma_off_quietly(drive:%s)\n", drive->name)); + + rc = __ide_dma_off_quietly(drive); + if (drive->pio_speed) + speed = drive->pio_speed - XFER_PIO_0; + config_for_pio(drive, speed, 0, 1); + drive->current_speed = drive->pio_speed; + + return rc; +} + +/* + * Ok, that is nasty, but we must make sure the DMA timings + * won't be used for a PIO access. The solution here is + * to make sure the 16 bits mode is diabled on the channel + * when DMA is enabled, thus causing the chip to use PIO0 + * timings for those operations. + */ +static void sl82c105_selectproc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u32 val, old, mask; + + //DBG(("sl82c105_selectproc(drive:%s)\n", drive->name)); + + mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16; + old = val = *((u32 *)&hwif->hwif_data); + if (drive->using_dma) + val &= ~mask; + else + val |= mask; + if (old != val) { + pci_write_config_dword(dev, 0x40, val); + *((u32 *)&hwif->hwif_data) = val; + } +} + +/* + * ATA reset will clear the 16 bits mode in the control + * register, we need to update our cache + */ +static void sl82c105_resetproc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u32 val; + + DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); + + pci_read_config_dword(dev, 0x40, &val); + *((u32 *)&hwif->hwif_data) = val; +} + +/* + * We only deal with PIO mode here - DMA mode 'using_dma' is not + * initialised at the point that this function is called. + */ +static void tune_sl82c105(ide_drive_t *drive, u8 pio) +{ + DBG(("tune_sl82c105(drive:%s)\n", drive->name)); + + config_for_pio(drive, pio, 1, 0); + + /* + * We support 32-bit I/O on this interface, and it + * doesn't have problems with interrupts. + */ + drive->io_32bit = 1; + drive->unmask = 1; +} + +/* + * Return the revision of the Winbond bridge + * which this function is part of. + */ +static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) +{ + struct pci_dev *bridge; + u8 rev; + + /* + * The bridge should be part of the same device, but function 0. + */ + bridge = pci_find_slot(dev->bus->number, + PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); + if (!bridge) + return -1; + + /* + * Make sure it is a Winbond 553 and is an ISA bridge. + */ + if (bridge->vendor != PCI_VENDOR_ID_WINBOND || + bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || + bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) + return -1; + + /* + * We need to find function 0's revision, not function 1 + */ + pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); + + return rev; +} + +/* + * Enable the PCI device + * + * --BenH: It's arch fixup code that should enable channels that + * have not been enabled by firmware. I decided we can still enable + * channel 0 here at least, but channel 1 has to be enabled by + * firmware or arch code. We still set both to 16 bits mode. + */ +static unsigned int __init init_chipset_sl82c105(struct pci_dev *dev, const char *msg) +{ + u32 val; + + DBG(("init_chipset_sl82c105()\n")); + + pci_read_config_dword(dev, 0x40, &val); + val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; + pci_write_config_dword(dev, 0x40, val); + + return dev->irq; +} + +static void __init init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base) +{ + unsigned int rev; + u8 dma_state; + + DBG(("init_dma_sl82c105(hwif: ide%d, dma_base: 0x%08x)\n", hwif->index, dma_base)); + + hwif->autodma = 0; + + if (!dma_base) + return; + + dma_state = hwif->INB(dma_base + 2); + rev = sl82c105_bridge_revision(hwif->pci_dev); + if (rev <= 5) { + printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n", + hwif->name, rev); + dma_state &= ~0x60; + } else { + dma_state |= 0x60; + if (!noautodma) + hwif->autodma = 1; + } + hwif->OUTB(dma_state, dma_base + 2); + + ide_setup_dma(hwif, dma_base, 8); +} + +/* + * Initialise the chip + */ + +static void __init init_hwif_sl82c105(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + u32 val; + + DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); + + hwif->tuneproc = tune_sl82c105; + hwif->selectproc = sl82c105_selectproc; + hwif->resetproc = sl82c105_resetproc; + + /* Default to PIO 0 for fallback unless tuned otherwise, + * we always autotune PIO, this is done before DMA is + * checked, so there is no risk of accidentally disabling + * DMA + */ + hwif->drives[0].pio_speed = XFER_PIO_0; + hwif->drives[0].autotune = 1; + hwif->drives[1].pio_speed = XFER_PIO_1; + hwif->drives[1].autotune = 1; + + pci_read_config_dword(dev, 0x40, &val); + *((u32 *)&hwif->hwif_data) = val; + + if (!hwif->dma_base) + return; + + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + +#ifdef CONFIG_BLK_DEV_IDEDMA + hwif->ide_dma_check = &sl82c105_check_drive; + hwif->ide_dma_on = &sl82c105_ide_dma_on; + hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly; + hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq; + hwif->dma_start = &sl82c105_ide_dma_start; + hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +#endif /* CONFIG_BLK_DEV_IDEDMA */ +} + +static ide_pci_device_t sl82c105_chipset __devinitdata = { + .name = "W82C105", + .init_chipset = init_chipset_sl82c105, + .init_hwif = init_hwif_sl82c105, + .init_dma = init_dma_sl82c105, + .channels = 2, + .autodma = NOAUTODMA, + .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, + .bootable = ON_BOARD, +}; + +static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &sl82c105_chipset); +} + +static struct pci_device_id sl82c105_pci_tbl[] = { + { PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl); + +static struct pci_driver driver = { + .name = "W82C105_IDE", + .id_table = sl82c105_pci_tbl, + .probe = sl82c105_init_one, +}; + +static int sl82c105_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(sl82c105_ide_init); + +MODULE_DESCRIPTION("PCI driver module for W82C105 IDE"); +MODULE_LICENSE("GPL"); |