summaryrefslogtreecommitdiff
path: root/drivers/ide/pci
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-10 22:39:32 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-10 22:39:32 +0200
commit1785192b5310ee25165768f5bb80f13146788e3e (patch)
tree526b0eb23c057b47fd5cdc6389808eba7f55faf0 /drivers/ide/pci
parenta02227c9774b3bff08c7f557d06247e0a03ac435 (diff)
hpt366: add hpt3xx_disable_fast_irq() helper
* Factor out disabling of "fast interrupt" prediction from init_hwif_hpt366() to hpt3xx_disable_fast_irq() helper. * Use hpt3xx_disable_fast_irq() in ->init_chipset instead of ->init_hwif method. This is a preparation for adding proper PCI PM support. While at it: * Cache chip type in chip_type variable in hpt3xx_disable_fast_irq(). There should be no functional changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/pci')
-rw-r--r--drivers/ide/pci/hpt366.c58
1 files changed, 33 insertions, 25 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 9056e3acc78b..ab6c217f104e 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -971,6 +971,36 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
return 1;
}
+static void __devinit hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ u8 chip_type = info->chip_type;
+ u8 new_mcr, old_mcr = 0;
+
+ /*
+ * Disable the "fast interrupt" prediction. Don't hold off
+ * on interrupts. (== 0x01 despite what the docs say)
+ */
+ pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
+
+ if (chip_type >= HPT374)
+ new_mcr = old_mcr & ~0x07;
+ else if (chip_type >= HPT370) {
+ new_mcr = old_mcr;
+ new_mcr &= ~0x02;
+#ifdef HPT_DELAY_INTERRUPT
+ new_mcr &= ~0x01;
+#else
+ new_mcr |= 0x01;
+#endif
+ } else /* HPT366 and HPT368 */
+ new_mcr = old_mcr & ~0x80;
+
+ if (new_mcr != old_mcr)
+ pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
+}
+
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
@@ -1208,9 +1238,11 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
* NOTE: This register is only writeable via I/O space.
*/
if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
-
outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
+ hpt3xx_disable_fast_irq(dev, 0x50);
+ hpt3xx_disable_fast_irq(dev, 0x54);
+
return dev->irq;
}
@@ -1264,7 +1296,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
- u8 new_mcr, old_mcr = 0;
/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
@@ -1287,29 +1318,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
/* Serialize access to this device if needed */
if (serialize && hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
-
- /*
- * Disable the "fast interrupt" prediction. Don't hold off
- * on interrupts. (== 0x01 despite what the docs say)
- */
- pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr);
-
- if (info->chip_type >= HPT374)
- new_mcr = old_mcr & ~0x07;
- else if (info->chip_type >= HPT370) {
- new_mcr = old_mcr;
- new_mcr &= ~0x02;
-
-#ifdef HPT_DELAY_INTERRUPT
- new_mcr &= ~0x01;
-#else
- new_mcr |= 0x01;
-#endif
- } else /* HPT366 and HPT368 */
- new_mcr = old_mcr & ~0x80;
-
- if (new_mcr != old_mcr)
- pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
}
static int __devinit init_dma_hpt366(ide_hwif_t *hwif,