Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits)
  amd74xx: remove /proc/ide/amd74xx
  amd74xx/via82cxxx: don't initialize drive->dn
  sis5513: remove /proc/ide/sis
  ide: remove CONFIG_IDEDMA_ONLYDISK
  ide: add "hdx=nodma" kernel parameter
  ide: remove hwif->autodma and drive->autodma
  ide: remove "idex=dma" kernel parameter
  ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED
  ide: use PCI_VDEVICE() macro
  sis5513: clear prefetch and postwrite for ATAPI devices
  it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
  ide: unexport noautodma
  ide: unexport ide_tune_dma
  ide: remove ->ide_dma_check (take 2)
  ide-pmac: add PIO autotune fallback to ->ide_dma_check
  ide-cris: add PIO autotune fallback to ->ide_dma_check
  sl82c105: add PIO autotune fallback to ->ide_dma_check
  cs5530/sc1200: add PIO autotune fallback to ->ide_dma_check
  ide: remove ide_use_fast_pio()
  ide: remove drive->init_speed zeroing
  ...

1 files changed, 3 insertions, 45 deletions

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 1129f8c30840..3d101f73f910 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -145,27 +145,13 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_FORCED
-/*
- * Long lost data from 2.0.34 that is now in 2.0.39
- *
- * This was used in ./drivers/block/triton.c to do DMA Base address setup
- * when PnP failed.  Oh the things we forget.  I believe this was part
- * of SFF-8038i that has been withdrawn from public access... :-((
- */
-#define DEFAULT_BMIBA	0xe800	/* in case BIOS did not init it */
-#define DEFAULT_BMCRBA	0xcc00	/* VIA's default value */
-#define DEFAULT_BMALIBA	0xd400	/* ALI's default value */
-#endif /* CONFIG_BLK_DEV_IDEDMA_FORCED */
-
 /**
  *	ide_get_or_set_dma_base		-	setup BMIBA
  *	@hwif: Interface
  *
- *	Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space:
- *	If need be we set up the DMA base. Where a device has a partner that
- *	is already in DMA mode we check and enforce IDE simplex rules.
+ *	Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
+ *	Where a device has a partner that is already in DMA mode we check
+ *	and enforce IDE simplex rules.
  */
 
 static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
@@ -173,12 +159,6 @@ static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
 	unsigned long	dma_base = 0;
 	struct pci_dev	*dev = hwif->pci_dev;
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_FORCED
-	int second_chance = 0;
-
-second_chance_to_dma:
-#endif /* CONFIG_BLK_DEV_IDEDMA_FORCED */
-
 	if (hwif->mmio)
 		return hwif->dma_base;
 
@@ -192,26 +172,6 @@ second_chance_to_dma:
 		}
 	}
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_FORCED
-	/* FIXME - should use pci_assign_resource surely */
-	if ((!dma_base) && (!second_chance)) {
-		unsigned long set_bmiba = 0;
-		second_chance++;
-		switch(dev->vendor) {
-			case PCI_VENDOR_ID_AL:
-				set_bmiba = DEFAULT_BMALIBA; break;
-			case PCI_VENDOR_ID_VIA:
-				set_bmiba = DEFAULT_BMCRBA; break;
-			case PCI_VENDOR_ID_INTEL:
-				set_bmiba = DEFAULT_BMIBA; break;
-			default:
-				return dma_base;
-		}
-		pci_write_config_dword(dev, 0x20, set_bmiba|1);
-		goto second_chance_to_dma;
-	}
-#endif /* CONFIG_BLK_DEV_IDEDMA_FORCED */
-
 	if (dma_base) {
 		u8 simplex_stat = 0;
 		dma_base += hwif->channel ? 8 : 0;
@@ -478,8 +438,6 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwi
  			 * Set up BM-DMA capability
 			 * (PnP BIOS should have done this)
  			 */
-			/* default DMA off if we had to configure it here */
-			hwif->autodma = 0;
 			pci_set_master(dev);
 			if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) {
 				printk(KERN_ERR "%s: %s error updating PCICMD\n",