Merge branch 'linus' into core/rcutip-core-rcu-2008-06-23_09.29_Mon

1 files changed, 66 insertions, 52 deletions

diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 545663ef820b..95f45f9b8e5e 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support"
 source "drivers/firewire/Kconfig"
 
 config IEEE1394
-	tristate "IEEE 1394 (FireWire) support"
+	tristate "Stable FireWire stack"
 	depends on PCI || BROKEN
 	help
 	  IEEE 1394 describes a high performance serial bus, which is also
@@ -19,30 +19,45 @@ config IEEE1394
 	  To compile this driver as a module, say M here: the
 	  module will be called ieee1394.
 
-comment "Subsystem Options"
-	depends on IEEE1394
-
-config IEEE1394_VERBOSEDEBUG
-	bool "Excessive debugging output"
-	depends on IEEE1394
+config IEEE1394_OHCI1394
+	tristate "OHCI-1394 controllers"
+	depends on PCI && IEEE1394
 	help
-	  If you say Y here, you will get very verbose debugging logs from
-	  the subsystem which includes a dump of the header of every sent
-	  and received packet.  This can amount to a high amount of data
-	  collected in a very short time which is usually also saved to
-	  disk by the system logging daemons.
+	  Enable this driver if you have an IEEE 1394 controller based on the
+	  OHCI-1394 specification. The current driver is only tested with OHCI
+	  chipsets made by Texas Instruments and NEC. Most third-party vendors
+	  use one of these chipsets.  It should work with any OHCI-1394
+	  compliant card, however.
 
-	  Say Y if you really want or need the debugging output, everyone
-	  else says N.
+	  To compile this driver as a module, say M here: the
+	  module will be called ohci1394.
 
-comment "Controllers"
-	depends on IEEE1394
+	  NOTE:
 
-comment "Texas Instruments PCILynx requires I2C"
+	  You should only build either ohci1394 or the new firewire-ohci driver,
+	  but not both.  If you nevertheless want to install both, you should
+	  configure them only as modules and blacklist the driver(s) which you
+	  don't want to have auto-loaded.  Add either
+
+	      blacklist firewire-ohci
+	  or
+	      blacklist ohci1394
+	      blacklist video1394
+	      blacklist dv1394
+
+	  to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+	  depending on your distribution.  The latter two modules should be
+	  blacklisted together with ohci1394 because they depend on ohci1394.
+
+	  If you have an old modprobe which doesn't implement the blacklist
+	  directive, use "install modulename /bin/true" for the modules to be
+	  blacklisted.
+
+comment "PCILynx controller requires I2C"
 	depends on IEEE1394 && I2C=n
 
 config IEEE1394_PCILYNX
-	tristate "Texas Instruments PCILynx support"
+	tristate "PCILynx controller"
 	depends on PCI && IEEE1394 && I2C
 	select I2C_ALGOBIT
 	help
@@ -57,35 +72,11 @@ config IEEE1394_PCILYNX
 	  PowerMacs G3 B&W contain the PCILynx controller.  Therefore
 	  almost everybody can say N here.
 
-config IEEE1394_OHCI1394
-	tristate "OHCI-1394 support"
-	depends on PCI && IEEE1394
-	help
-	  Enable this driver if you have an IEEE 1394 controller based on the
-	  OHCI-1394 specification. The current driver is only tested with OHCI
-	  chipsets made by Texas Instruments and NEC. Most third-party vendors
-	  use one of these chipsets.  It should work with any OHCI-1394
-	  compliant card, however.
-
-	  To compile this driver as a module, say M here: the
-	  module will be called ohci1394.
-
-comment "Protocols"
-	depends on IEEE1394
-
-config IEEE1394_VIDEO1394
-	tristate "OHCI-1394 Video support"
-	depends on IEEE1394 && IEEE1394_OHCI1394
-	help
-	  This option enables video device usage for OHCI-1394 cards.  Enable
-	  this option only if you have an IEEE 1394 video device connected to
-	  an OHCI-1394 card.
-
 comment "SBP-2 support (for storage devices) requires SCSI"
 	depends on IEEE1394 && SCSI=n
 
 config IEEE1394_SBP2
-	tristate "SBP-2 support (Harddisks etc.)"
+	tristate "Storage devices (SBP-2 protocol)"
 	depends on IEEE1394 && SCSI
 	help
 	  This option enables you to use SBP-2 devices connected to an IEEE
@@ -127,24 +118,47 @@ config IEEE1394_ETH1394
 
 	  The module is called eth1394 although it does not emulate Ethernet.
 
+config IEEE1394_RAWIO
+	tristate "raw1394 userspace interface"
+	depends on IEEE1394
+	help
+	  This option adds support for the raw1394 device file which enables
+	  direct communication of user programs with IEEE 1394 devices
+	  (isochronous and asynchronous).  Almost all application programs
+	  which access FireWire require this option.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called raw1394.
+
+config IEEE1394_VIDEO1394
+	tristate "video1394 userspace interface"
+	depends on IEEE1394 && IEEE1394_OHCI1394
+	help
+	  This option adds support for the video1394 device files which enable
+	  isochronous communication of user programs with IEEE 1394 devices,
+	  especially video capture or export.  This interface is used by all
+	  libdc1394 based programs and by several other programs, in addition to
+	  the raw1394 interface.  It is generally not required for DV capture.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called video1394.
+
 config IEEE1394_DV1394
-	tristate "OHCI-DV I/O support (deprecated)"
+	tristate "dv1394 userspace interface (deprecated)"
 	depends on IEEE1394 && IEEE1394_OHCI1394
 	help
 	  The dv1394 driver is unsupported and may be removed from Linux in a
 	  future release.  Its functionality is now provided by raw1394 together
 	  with libraries such as libiec61883.
 
-config IEEE1394_RAWIO
-	tristate "Raw IEEE1394 I/O support"
+config IEEE1394_VERBOSEDEBUG
+	bool "Excessive debugging output"
 	depends on IEEE1394
 	help
-	  This option adds support for the raw1394 device file which enables
-	  direct communication of user programs with the IEEE 1394 bus and thus
-	  with the attached peripherals.  Almost all application programs which
-	  access FireWire require this option.
+	  If you say Y here, you will get very verbose debugging logs from the
+	  ieee1394 drivers, including sent and received packet headers.  This
+	  will quickly result in large amounts of data sent to the system log.
 
-	  To compile this driver as a module, say M here: the module will be
-	  called raw1394.
+	  Say Y if you really need the debugging output.  Everyone else says N.
 
 endmenu