diff options
author | Ralph Campbell <ralph.campbell@qlogic.com> | 2010-05-06 17:03:19 -0700 |
---|---|---|
committer | Roland Dreier <rolandd@cisco.com> | 2010-05-23 22:14:25 -0700 |
commit | f6d60848baf9f4015c76c665791875ed623cd5b7 (patch) | |
tree | 7079f308086c79f535550be9bfa3c86accdf5557 /drivers/infiniband/hw | |
parent | f931551bafe1f10ded7f5282e2aa162c267a2e5d (diff) |
IB/ipath: Remove support for QLogic PCIe QLE devices
The ib_qib driver is taking over support for QLogic PCIe QLE devices,
so remove support for them from ib_ipath. The ib_ipath driver now
supports only the obsolete QLogic Hyper-Transport IB host channel
adapter (model QHT7140).
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Diffstat (limited to 'drivers/infiniband/hw')
-rw-r--r-- | drivers/infiniband/hw/ipath/Kconfig | 8 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/Makefile | 6 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_7220.h | 57 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_driver.c | 28 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_iba6120.c | 1862 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_iba7220.c | 2631 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_kernel.h | 2 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_sd7220.c | 1462 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_sd7220_img.c | 1082 |
9 files changed, 7 insertions, 7131 deletions
diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig index 3c7968f25ec2..1d9bb115cbf6 100644 --- a/drivers/infiniband/hw/ipath/Kconfig +++ b/drivers/infiniband/hw/ipath/Kconfig @@ -1,9 +1,11 @@ config INFINIBAND_IPATH - tristate "QLogic InfiniPath Driver" - depends on 64BIT && NET + tristate "QLogic HTX HCA support" + depends on 64BIT && NET && HT_IRQ ---help--- - This is a driver for QLogic InfiniPath host channel adapters, + This is a driver for the obsolete QLogic Hyper-Transport + IB host channel adapter (model QHT7140), including InfiniBand verbs support. This driver allows these devices to be used with both kernel upper level protocols such as IP-over-InfiniBand as well as with userspace applications (in conjunction with InfiniBand userspace access). + For QLogic PCIe QLE based cards, use the QIB driver instead. diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile index bf9450061986..fa3df82681df 100644 --- a/drivers/infiniband/hw/ipath/Makefile +++ b/drivers/infiniband/hw/ipath/Makefile @@ -29,13 +29,9 @@ ib_ipath-y := \ ipath_user_pages.o \ ipath_user_sdma.o \ ipath_verbs_mcast.o \ - ipath_verbs.o \ - ipath_iba7220.o \ - ipath_sd7220.o \ - ipath_sd7220_img.o + ipath_verbs.o ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o -ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o diff --git a/drivers/infiniband/hw/ipath/ipath_7220.h b/drivers/infiniband/hw/ipath/ipath_7220.h deleted file mode 100644 index 74fa5cc5131d..000000000000 --- a/drivers/infiniband/hw/ipath/ipath_7220.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _IPATH_7220_H -#define _IPATH_7220_H -/* - * Copyright (c) 2007 QLogic Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * This header file provides the declarations and common definitions - * for (mostly) manipulation of the SerDes blocks within the IBA7220. - * the functions declared should only be called from within other - * 7220-related files such as ipath_iba7220.c or ipath_sd7220.c. - */ -int ipath_sd7220_presets(struct ipath_devdata *dd); -int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset); -int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum, u8 *img, - int len, int offset); -int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum, const u8 *img, - int len, int offset); -/* - * Below used for sdnum parameter, selecting one of the two sections - * used for PCIe, or the single SerDes used for IB, which is the - * only one currently used - */ -#define IB_7220_SERDES 2 - -int ipath_sd7220_ib_load(struct ipath_devdata *dd); -int ipath_sd7220_ib_vfy(struct ipath_devdata *dd); - -#endif /* _IPATH_7220_H */ diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 6302626d17f0..21337468c652 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -132,18 +132,13 @@ static int __devinit ipath_init_one(struct pci_dev *, /* Only needed for registration, nothing else needs this info */ #define PCI_VENDOR_ID_PATHSCALE 0x1fc1 -#define PCI_VENDOR_ID_QLOGIC 0x1077 #define PCI_DEVICE_ID_INFINIPATH_HT 0xd -#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10 -#define PCI_DEVICE_ID_INFINIPATH_7220 0x7220 /* Number of seconds before our card status check... */ #define STATUS_TIMEOUT 60 static const struct pci_device_id ipath_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) }, - { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) }, - { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_INFINIPATH_7220) }, { 0, } }; @@ -521,30 +516,9 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, /* setup the chip-specific functions, as early as possible. */ switch (ent->device) { case PCI_DEVICE_ID_INFINIPATH_HT: -#ifdef CONFIG_HT_IRQ ipath_init_iba6110_funcs(dd); break; -#else - ipath_dev_err(dd, "QLogic HT device 0x%x cannot work if " - "CONFIG_HT_IRQ is not enabled\n", ent->device); - return -ENODEV; -#endif - case PCI_DEVICE_ID_INFINIPATH_PE800: -#ifdef CONFIG_PCI_MSI - ipath_init_iba6120_funcs(dd); - break; -#else - ipath_dev_err(dd, "QLogic PCIE device 0x%x cannot work if " - "CONFIG_PCI_MSI is not enabled\n", ent->device); - return -ENODEV; -#endif - case PCI_DEVICE_ID_INFINIPATH_7220: -#ifndef CONFIG_PCI_MSI - ipath_dbg("CONFIG_PCI_MSI is not enabled, " - "using INTx for unit %u\n", dd->ipath_unit); -#endif - ipath_init_iba7220_funcs(dd); - break; + default: ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, " "failing\n", ent->device); diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c deleted file mode 100644 index 4b4a30b0dabd..000000000000 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ /dev/null @@ -1,1862 +0,0 @@ -/* - * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. - * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ -/* - * This file contains all of the code that is specific to the - * InfiniPath PCIe chip. - */ - -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <rdma/ib_verbs.h> - -#include "ipath_kernel.h" -#include "ipath_registers.h" - -static void ipath_setup_pe_setextled(struct ipath_devdata *, u64, u64); - -/* - * This file contains all the chip-specific register information and - * access functions for the QLogic InfiniPath PCI-Express chip. - * - * This lists the InfiniPath registers, in the actual chip layout. - * This structure should never be directly accessed. - */ -struct _infinipath_do_not_use_kernel_regs { - unsigned long long Revision; - unsigned long long Control; - unsigned long long PageAlign; - unsigned long long PortCnt; - unsigned long long DebugPortSelect; - unsigned long long Reserved0; - unsigned long long SendRegBase; - unsigned long long UserRegBase; - unsigned long long CounterRegBase; - unsigned long long Scratch; - unsigned long long Reserved1; - unsigned long long Reserved2; - unsigned long long IntBlocked; - unsigned long long IntMask; - unsigned long long IntStatus; - unsigned long long IntClear; - unsigned long long ErrorMask; - unsigned long long ErrorStatus; - unsigned long long ErrorClear; - unsigned long long HwErrMask; - unsigned long long HwErrStatus; - unsigned long long HwErrClear; - unsigned long long HwDiagCtrl; - unsigned long long MDIO; - unsigned long long IBCStatus; - unsigned long long IBCCtrl; - unsigned long long ExtStatus; - unsigned long long ExtCtrl; - unsigned long long GPIOOut; - unsigned long long GPIOMask; - unsigned long long GPIOStatus; - unsigned long long GPIOClear; - unsigned long long RcvCtrl; - unsigned long long RcvBTHQP; - unsigned long long RcvHdrSize; - unsigned long long RcvHdrCnt; - unsigned long long RcvHdrEntSize; - unsigned long long RcvTIDBase; - unsigned long long RcvTIDCnt; - unsigned long long RcvEgrBase; - unsigned long long RcvEgrCnt; - unsigned long long RcvBufBase; - unsigned long long RcvBufSize; - unsigned long long RxIntMemBase; - unsigned long long RxIntMemSize; - unsigned long long RcvPartitionKey; - unsigned long long Reserved3; - unsigned long long RcvPktLEDCnt; - unsigned long long Reserved4[8]; - unsigned long long SendCtrl; - unsigned long long SendPIOBufBase; - unsigned long long SendPIOSize; - unsigned long long SendPIOBufCnt; - unsigned long long SendPIOAvailAddr; - unsigned long long TxIntMemBase; - unsigned long long TxIntMemSize; - unsigned long long Reserved5; - unsigned long long PCIeRBufTestReg0; - unsigned long long PCIeRBufTestReg1; - unsigned long long Reserved51[6]; - unsigned long long SendBufferError; - unsigned long long SendBufferErrorCONT1; - unsigned long long Reserved6SBE[6]; - unsigned long long RcvHdrAddr0; - unsigned long long RcvHdrAddr1; - unsigned long long RcvHdrAddr2; - unsigned long long RcvHdrAddr3; - unsigned long long RcvHdrAddr4; - unsigned long long Reserved7RHA[11]; - unsigned long long RcvHdrTailAddr0; - unsigned long long RcvHdrTailAddr1; - unsigned long long RcvHdrTailAddr2; - unsigned long long RcvHdrTailAddr3; - unsigned long long RcvHdrTailAddr4; - unsigned long long Reserved8RHTA[11]; - unsigned long long Reserved9SW[8]; - unsigned long long SerdesConfig0; - unsigned long long SerdesConfig1; - unsigned long long SerdesStatus; - unsigned long long XGXSConfig; - unsigned long long IBPLLCfg; - unsigned long long Reserved10SW2[3]; - unsigned long long PCIEQ0SerdesConfig0; - unsigned long long PCIEQ0SerdesConfig1; - unsigned long long PCIEQ0SerdesStatus; - unsigned long long Reserved11; - unsigned long long PCIEQ1SerdesConfig0; - unsigned long long PCIEQ1SerdesConfig1; - unsigned long long PCIEQ1SerdesStatus; - unsigned long long Reserved12; -}; - -struct _infinipath_do_not_use_counters { - __u64 LBIntCnt; - __u64 LBFlowStallCnt; - __u64 Reserved1; - __u64 TxUnsupVLErrCnt; - __u64 TxDataPktCnt; - __u64 TxFlowPktCnt; - __u64 TxDwordCnt; - __u64 TxLenErrCnt; - __u64 TxMaxMinLenErrCnt; - __u64 TxUnderrunCnt; - __u64 TxFlowStallCnt; - __u64 TxDroppedPktCnt; - __u64 RxDroppedPktCnt; - __u64 RxDataPktCnt; - __u64 RxFlowPktCnt; - __u64 RxDwordCnt; - __u64 RxLenErrCnt; - __u64 RxMaxMinLenErrCnt; - __u64 RxICRCErrCnt; - __u64 RxVCRCErrCnt; - __u64 RxFlowCtrlErrCnt; - __u64 RxBadFormatCnt; - __u64 RxLinkProblemCnt; - __u64 RxEBPCnt; - __u64 RxLPCRCErrCnt; - __u64 RxBufOvflCnt; - __u64 RxTIDFullErrCnt; - __u64 RxTIDValidErrCnt; - __u64 RxPKeyMismatchCnt; - __u64 RxP0HdrEgrOvflCnt; - __u64 RxP1HdrEgrOvflCnt; - __u64 RxP2HdrEgrOvflCnt; - __u64 RxP3HdrEgrOvflCnt; - __u64 RxP4HdrEgrOvflCnt; - __u64 RxP5HdrEgrOvflCnt; - __u64 RxP6HdrEgrOvflCnt; - __u64 RxP7HdrEgrOvflCnt; - __u64 RxP8HdrEgrOvflCnt; - __u64 Reserved6; - __u64 Reserved7; - __u64 IBStatusChangeCnt; - __u64 IBLinkErrRecoveryCnt; - __u64 IBLinkDownedCnt; - __u64 IBSymbolErrCnt; -}; - -#define IPATH_KREG_OFFSET(field) (offsetof( \ - struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) -#define IPATH_CREG_OFFSET(field) (offsetof( \ - struct _infinipath_do_not_use_counters, field) / sizeof(u64)) - -static const struct ipath_kregs ipath_pe_kregs = { - .kr_control = IPATH_KREG_OFFSET(Control), - .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase), - .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect), - .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear), - .kr_errormask = IPATH_KREG_OFFSET(ErrorMask), - .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus), - .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl), - .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus), - .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear), - .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask), - .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut), - .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus), - .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl), - .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear), - .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask), - .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus), - .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl), - .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus), - .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked), - .kr_intclear = IPATH_KREG_OFFSET(IntClear), - .kr_intmask = IPATH_KREG_OFFSET(IntMask), - .kr_intstatus = IPATH_KREG_OFFSET(IntStatus), - .kr_mdio = IPATH_KREG_OFFSET(MDIO), - .kr_pagealign = IPATH_KREG_OFFSET(PageAlign), - .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey), - .kr_portcnt = IPATH_KREG_OFFSET(PortCnt), - .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP), - .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase), - .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize), - .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl), - .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase), - .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt), - .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt), - .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize), - .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize), - .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase), - .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize), - .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase), - .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt), - .kr_revision = IPATH_KREG_OFFSET(Revision), - .kr_scratch = IPATH_KREG_OFFSET(Scratch), - .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError), - .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl), - .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr), - .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase), - .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt), - .kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize), - .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase), - .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase), - .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize), - .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase), - .kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0), - .kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1), - .kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus), - .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig), - .kr_ibpllcfg = IPATH_KREG_OFFSET(IBPLLCfg), - - /* - * These should not be used directly via ipath_write_kreg64(), - * use them with ipath_write_kreg64_port(), - */ - .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0), - .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0), - - /* The rcvpktled register controls one of the debug port signals, so - * a packet activity LED can be connected to it. */ - .kr_rcvpktledcnt = IPATH_KREG_OFFSET(RcvPktLEDCnt), - .kr_pcierbuftestreg0 = IPATH_KREG_OFFSET(PCIeRBufTestReg0), - .kr_pcierbuftestreg1 = IPATH_KREG_OFFSET(PCIeRBufTestReg1), - .kr_pcieq0serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig0), - .kr_pcieq0serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig1), - .kr_pcieq0serdesstatus = IPATH_KREG_OFFSET(PCIEQ0SerdesStatus), - .kr_pcieq1serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig0), - .kr_pcieq1serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig1), - .kr_pcieq1serdesstatus = IPATH_KREG_OFFSET(PCIEQ1SerdesStatus) -}; - -static const struct ipath_cregs ipath_pe_cregs = { - .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt), - .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt), - .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt), - .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt), - .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt), - .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt), - .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt), - .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt), - .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt), - .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt), - .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt), - .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt), - .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt), - .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt), - .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt), - .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt), - .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt), - .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt), - .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt), - .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt), - .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt), - .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt), - .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt), - .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt), - .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt), - .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt), - .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt), - .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt), - .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt), - .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt), - .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt), - .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt), - .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt) -}; - -/* kr_control bits */ -#define INFINIPATH_C_RESET 1U - -/* kr_intstatus, kr_intclear, kr_intmask bits */ -#define INFINIPATH_I_RCVURG_MASK ((1U<<5)-1) -#define INFINIPATH_I_RCVURG_SHIFT 0 -#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<5)-1) -#define INFINIPATH_I_RCVAVAIL_SHIFT 12 - -/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */ -#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK 0x000000000000003fULL -#define INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT 0 -#define INFINIPATH_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL -#define INFINIPATH_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL -#define INFINIPATH_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL -#define INFINIPATH_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL -#define INFINIPATH_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL -#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL -#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL -#define INFINIPATH_HWE_PCIE1PLLFAILED 0x0400000000000000ULL -#define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL -#define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL - -#define IBA6120_IBCS_LINKTRAININGSTATE_MASK 0xf -#define IBA6120_IBCS_LINKSTATE_SHIFT 4 - -/* kr_extstatus bits */ -#define INFINIPATH_EXTS_FREQSEL 0x2 -#define INFINIPATH_EXTS_SERDESSEL 0x4 -#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000 -#define INFINIPATH_EXTS_MEMBIST_FOUND 0x0000000000008000 - -/* kr_xgxsconfig bits */ -#define INFINIPATH_XGXS_RESET 0x5ULL - -#define _IPATH_GPIO_SDA_NUM 1 -#define _IPATH_GPIO_SCL_NUM 0 - -#define IPATH_GPIO_SDA (1ULL << \ - (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) -#define IPATH_GPIO_SCL (1ULL << \ - (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) - -#define INFINIPATH_RT_BUFSIZE_MASK 0xe0000000ULL -#define INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid) \ - ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) >> 29) + 11 - 1) -#define INFINIPATH_RT_BUFSIZE(tid) (1 << INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid)) -#define INFINIPATH_RT_IS_VALID(tid) \ - (((tid) & INFINIPATH_RT_BUFSIZE_MASK) && \ - ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) != INFINIPATH_RT_BUFSIZE_MASK))) -#define INFINIPATH_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */ -#define INFINIPATH_RT_ADDR_SHIFT 10 - -#define INFINIPATH_R_INTRAVAIL_SHIFT 16 -#define INFINIPATH_R_TAILUPD_SHIFT 31 - -/* 6120 specific hardware errors... */ -static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = { - INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"), - INFINIPATH_HWE_MSG(PCIECPLTIMEOUT, "PCIe completion timeout"), - /* - * In practice, it's unlikely wthat we'll see PCIe PLL, or bus - * parity or memory parity error failures, because most likely we - * won't be able to talk to the core of the chip. Nonetheless, we - * might see them, if they are in parts of the PCIe core that aren't - * essential. - */ - INFINIPATH_HWE_MSG(PCIE1PLLFAILED, "PCIePLL1"), - INFINIPATH_HWE_MSG(PCIE0PLLFAILED, "PCIePLL0"), - INFINIPATH_HWE_MSG(PCIEBUSPARITYXTLH, "PCIe XTLH core parity"), - INFINIPATH_HWE_MSG(PCIEBUSPARITYXADM, "PCIe ADM TX core parity"), - INFINIPATH_HWE_MSG(PCIEBUSPARITYRADM, "PCIe ADM RX core parity"), - INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"), - INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"), -}; - -#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \ - INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \ - << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) -#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \ - << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) - -static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *, - u32, unsigned long); - -/* - * On platforms using this chip, and not having ordered WC stores, we - * can get TXE parity errors due to speculative reads to the PIO buffers, - * and this, due to a chip bug can result in (many) false parity error - * reports. So it's a debug print on those, and an info print on systems - * where the speculative reads don't occur. - */ -static void ipath_pe_txe_recover(struct ipath_devdata *dd) -{ - if (ipath_unordered_wc()) - ipath_dbg("Recovering from TXE PIO parity error\n"); - else { - ++ipath_stats.sps_txeparity; - dev_info(&dd->pcidev->dev, - "Recovering from TXE PIO parity error\n"); - } -} - - -/** - * ipath_pe_handle_hwerrors - display hardware errors. - * @dd: the infinipath device - * @msg: the output buffer - * @msgl: the size of the output buffer - * - * Use same msg buffer as regular errors to avoid excessive stack - * use. Most hardware errors are catastrophic, but for right now, - * we'll print them and continue. We reuse the same message buffer as - * ipath_handle_errors() to avoid excessive stack usage. - */ -static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, - size_t msgl) -{ - ipath_err_t hwerrs; - u32 bits, ctrl; - int isfatal = 0; - char bitsmsg[64]; - int log_idx; - - hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus); - if (!hwerrs) { - /* - * better than printing cofusing messages - * This seems to be related to clearing the crc error, or - * the pll error during init. - */ - ipath_cdbg(VERBOSE, "Called but no hardware errors set\n"); - return; - } else if (hwerrs == ~0ULL) { - ipath_dev_err(dd, "Read of hardware error status failed " - "(all bits set); ignoring\n"); - return; - } - ipath_stats.sps_hwerrs++; - - /* Always clear the error status register, except MEMBISTFAIL, - * regardless of whether we continue or stop using the chip. - * We want that set so we know it failed, even across driver reload. - * We'll still ignore it in the hwerrmask. We do this partly for - * diagnostics, but also for support */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, - hwerrs&~INFINIPATH_HWE_MEMBISTFAILED); - - hwerrs &= dd->ipath_hwerrmask; - - /* We log some errors to EEPROM, check if we have any of those. */ - for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx) - if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log) - ipath_inc_eeprom_err(dd, log_idx, 1); - - /* - * make sure we get this much out, unless told to be quiet, - * or it's occurred within the last 5 seconds - */ - if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY | - RXE_EAGER_PARITY)) || - (ipath_debug & __IPATH_VERBDBG)) - dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx " - "(cleared)\n", (unsigned long long) hwerrs); - dd->ipath_lasthwerror |= hwerrs; - - if (hwerrs & ~dd->ipath_hwe_bitsextant) - ipath_dev_err(dd, "hwerror interrupt with unknown errors " - "%llx set\n", (unsigned long long) - (hwerrs & ~dd->ipath_hwe_bitsextant)); - - ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control); - if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) { - /* - * parity errors in send memory are recoverable, - * just cancel the send (if indicated in * sendbuffererror), - * count the occurrence, unfreeze (if no other handled - * hardware error bits are set), and continue. They can - * occur if a processor speculative read is done to the PIO - * buffer while we are sending a packet, for example. - */ - if (hwerrs & TXE_PIO_PARITY) { - ipath_pe_txe_recover(dd); - hwerrs &= ~TXE_PIO_PARITY; - } - if (!hwerrs) { - static u32 freeze_cnt; - - freeze_cnt++; - ipath_dbg("Clearing freezemode on ignored or recovered " - "hardware error (%u)\n", freeze_cnt); - ipath_clear_freeze(dd); - } - } - - *msg = '\0'; - - if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) { - strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]", - msgl); - /* ignore from now on, so disable until driver reloaded */ - *dd->ipath_statusp |= IPATH_STATUS_HWERROR; - dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED; - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask); - } - - ipath_format_hwerrors(hwerrs, - ipath_6120_hwerror_msgs, - sizeof(ipath_6120_hwerror_msgs)/ - sizeof(ipath_6120_hwerror_msgs[0]), - msg, msgl); - - if (hwerrs & (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK - << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT)) { - bits = (u32) ((hwerrs >> - INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) & - INFINIPATH_HWE_PCIEMEMPARITYERR_MASK); - snprintf(bitsmsg, sizeof bitsmsg, - "[PCIe Mem Parity Errs %x] ", bits); - strlcat(msg, bitsmsg, msgl); - } - -#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \ - INFINIPATH_HWE_COREPLL_RFSLIP ) - - if (hwerrs & _IPATH_PLL_FAIL) { - snprintf(bitsmsg, sizeof bitsmsg, - "[PLL failed (%llx), InfiniPath hardware unusable]", - (unsigned long long) hwerrs & _IPATH_PLL_FAIL); - strlcat(msg, bitsmsg, msgl); - /* ignore from now on, so disable until driver reloaded */ - dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask); - } - - if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) { - /* - * If it occurs, it is left masked since the external - * interface is unused - */ - dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED; - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask); - } - - if (hwerrs) { - /* - * if any set that we aren't ignoring; only - * make the complaint once, in case it's stuck - * or recurring, and we get here multiple - * times. - */ - ipath_dev_err(dd, "%s hardware error\n", msg); - if (dd->ipath_flags & IPATH_INITTED) { - ipath_set_linkstate(dd, IPATH_IB_LINKDOWN); - ipath_setup_pe_setextled(dd, - INFINIPATH_IBCS_L_STATE_DOWN, - INFINIPATH_IBCS_LT_STATE_DISABLED); - ipath_dev_err(dd, "Fatal Hardware Error (freeze " - "mode), no longer usable, SN %.16s\n", - dd->ipath_serial); - isfatal = 1; - } - *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY; - /* mark as having had error */ - *dd->ipath_statusp |= IPATH_STATUS_HWERROR; - /* - * mark as not usable, at a minimum until driver - * is reloaded, probably until reboot, since no - * other reset is possible. - */ - dd->ipath_flags &= ~IPATH_INITTED; - } else - *msg = 0; /* recovered from all of them */ - - if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg && msg) { - /* - * for /sys status file ; if no trailing brace is copied, - * we'll know it was truncated. - */ - snprintf(dd->ipath_freezemsg, dd->ipath_freezelen, - "{%s}", msg); - } -} - -/** - * ipath_pe_boardname - fill in the board name - * @dd: the infinipath device - * @name: the output buffer - * @namelen: the size of the output buffer - * - * info is based on the board revision register - */ -static int ipath_pe_boardname(struct ipath_devdata *dd, char *name, - size_t namelen) -{ - char *n = NULL; - u8 boardrev = dd->ipath_boardrev; - int ret; - - switch (boardrev) { - case 0: - n = "InfiniPath_Emulation"; - break; - case 1: - n = "InfiniPath_QLE7140-Bringup"; - break; - case 2: - n = "InfiniPath_QLE7140"; - break; - case 3: - n = "InfiniPath_QMI7140"; - break; - case 4: - n = "InfiniPath_QEM7140"; - break; - case 5: - n = "InfiniPath_QMH7140"; - break; - case 6: - n = "InfiniPath_QLE7142"; - break; - default: - ipath_dev_err(dd, - "Don't yet know about board with ID %u\n", - boardrev); - snprintf(name, namelen, "Unknown_InfiniPath_PCIe_%u", - boardrev); - break; - } - if (n) - snprintf(name, namelen, "%s", n); - - if (dd->ipath_majrev != 4 || !dd->ipath_minrev || dd->ipath_minrev>2) { - ipath_dev_err(dd, "Unsupported InfiniPath hardware revision %u.%u!\n", - dd->ipath_majrev, dd->ipath_minrev); - ret = 1; - } else { - ret = 0; - if (dd->ipath_minrev >= 2) - dd->ipath_f_put_tid = ipath_pe_put_tid_2; - } - - /* - * set here, not in ipath_init_*_funcs because we have to do - * it after we can read chip registers. - */ - dd->ipath_ureg_align = - ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign); - - return ret; -} - -/** - * ipath_pe_init_hwerrors - enable hardware errors - * @dd: the infinipath device - * - * now that we have finished initializing everything that might reasonably - * cause a hardware error, and cleared those errors bits as they occur, - * we can enable hardware errors in the mask (potentially enabling - * freeze mode), and enable hardware errors as errors (along with - * everything else) in errormask - */ -static void ipath_pe_init_hwerrors(struct ipath_devdata *dd) -{ - ipath_err_t val; - u64 extsval; - - extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus); - - if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST)) - ipath_dev_err(dd, "MemBIST did not complete!\n"); - if (extsval & INFINIPATH_EXTS_MEMBIST_FOUND) - ipath_dbg("MemBIST corrected\n"); - - val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */ - - if (!dd->ipath_boardrev) // no PLL for Emulator - val &= ~INFINIPATH_HWE_SERDESPLLFAILED; - - if (dd->ipath_minrev < 2) { - /* workaround bug 9460 in internal interface bus parity - * checking. Fixed (HW bug 9490) in Rev2. - */ - val &= ~INFINIPATH_HWE_PCIEBUSPARITYRADM; - } - dd->ipath_hwerrmask = val; -} - -/** - * ipath_pe_bringup_serdes - bring up the serdes - * @dd: the infinipath device - */ -static int ipath_pe_bringup_serdes(struct ipath_devdata *dd) -{ - u64 val, config1, prev_val; - int ret = 0; - - ipath_dbg("Trying to bringup serdes\n"); - - if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) & - INFINIPATH_HWE_SERDESPLLFAILED) { - ipath_dbg("At start, serdes PLL failed bit set " - "in hwerrstatus, clearing and continuing\n"); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, - INFINIPATH_HWE_SERDESPLLFAILED); - } - - dd->ibdeltainprog = 1; - dd->ibsymsnap = - ipath_read_creg32(dd, dd->ipath_cregs->cr_ibsymbolerrcnt); - dd->iblnkerrsnap = - ipath_read_creg32(dd, dd->ipath_cregs->cr_iblinkerrrecovcnt); - - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0); - config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1); - - ipath_cdbg(VERBOSE, "SerDes status config0=%llx config1=%llx, " - "xgxsconfig %llx\n", (unsigned long long) val, - (unsigned long long) config1, (unsigned long long) - ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); - - /* - * Force reset on, also set rxdetect enable. Must do before reading - * serdesstatus at least for simulation, or some of the bits in - * serdes status will come back as undefined and cause simulation - * failures - */ - val |= INFINIPATH_SERDC0_RESET_PLL | INFINIPATH_SERDC0_RXDETECT_EN - | INFINIPATH_SERDC0_L1PWR_DN; - ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); - /* be sure chip saw it */ - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - udelay(5); /* need pll reset set at least for a bit */ - /* - * after PLL is reset, set the per-lane Resets and TxIdle and - * clear the PLL reset and rxdetect (to get falling edge). - * Leave L1PWR bits set (permanently) - */ - val &= ~(INFINIPATH_SERDC0_RXDETECT_EN | INFINIPATH_SERDC0_RESET_PLL - | INFINIPATH_SERDC0_L1PWR_DN); - val |= INFINIPATH_SERDC0_RESET_MASK | INFINIPATH_SERDC0_TXIDLE; - ipath_cdbg(VERBOSE, "Clearing pll reset and setting lane resets " - "and txidle (%llx)\n", (unsigned long long) val); - ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); - /* be sure chip saw it */ - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - /* need PLL reset clear for at least 11 usec before lane - * resets cleared; give it a few more to be sure */ - udelay(15); - val &= ~(INFINIPATH_SERDC0_RESET_MASK | INFINIPATH_SERDC0_TXIDLE); - - ipath_cdbg(VERBOSE, "Clearing lane resets and txidle " - "(writing %llx)\n", (unsigned long long) val); - ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); - /* be sure chip saw it */ - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); - prev_val = val; - if (val & INFINIPATH_XGXS_RESET) - val &= ~INFINIPATH_XGXS_RESET; - if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) & - INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) { - /* need to compensate for Tx inversion in partner */ - val &= ~(INFINIPATH_XGXS_RX_POL_MASK << - INFINIPATH_XGXS_RX_POL_SHIFT); - val |= dd->ipath_rx_pol_inv << - INFINIPATH_XGXS_RX_POL_SHIFT; - } - if (val != prev_val) - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); - - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0); - - /* clear current and de-emphasis bits */ - config1 &= ~0x0ffffffff00ULL; - /* set current to 20ma */ - config1 |= 0x00000000000ULL; - /* set de-emphasis to -5.68dB */ - config1 |= 0x0cccc000000ULL; - ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1); - - ipath_cdbg(VERBOSE, "done: SerDes status config0=%llx " - "config1=%llx, sstatus=%llx xgxs=%llx\n", - (unsigned long long) val, (unsigned long long) config1, - (unsigned long long) - ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus), - (unsigned long long) - ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); - - return ret; -} - -/** - * ipath_pe_quiet_serdes - set serdes to txidle - * @dd: the infinipath device - * Called when driver is being unloaded - */ -static void ipath_pe_quiet_serdes(struct ipath_devdata *dd) -{ - u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0); - - if (dd->ibsymdelta || dd->iblnkerrdelta || - dd->ibdeltainprog) { - u64 diagc; - /* enable counter writes */ - diagc = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwdiagctrl); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl, - diagc | INFINIPATH_DC_COUNTERWREN); - - if (dd->ibsymdelta || dd->ibdeltainprog) { - val = ipath_read_creg32(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt); - if (dd->ibdeltainprog) - val -= val - dd->ibsymsnap; - val -= dd->ibsymdelta; - ipath_write_creg(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt, val); - } - if (dd->iblnkerrdelta || dd->ibdeltainprog) { - val = ipath_read_creg32(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt); - if (dd->ibdeltainprog) - val -= val - dd->iblnkerrsnap; - val -= dd->iblnkerrdelta; - ipath_write_creg(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt, val); - } - - /* and disable counter writes */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl, diagc); - } - val |= INFINIPATH_SERDC0_TXIDLE; - ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n", - (unsigned long long) val); - ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); -} - -static int ipath_pe_intconfig(struct ipath_devdata *dd) -{ - u32 chiprev; - - /* - * If the chip supports added error indication via GPIO pins, - * enable interrupts on those bits so the interrupt routine - * can count the events. Also set flag so interrupt routine - * can know they are expected. - */ - chiprev = dd->ipath_revision >> INFINIPATH_R_CHIPREVMINOR_SHIFT; - if ((chiprev & INFINIPATH_R_CHIPREVMINOR_MASK) > 1) { - /* Rev2+ reports extra errors via internal GPIO pins */ - dd->ipath_flags |= IPATH_GPIO_ERRINTRS; - dd->ipath_gpio_mask |= IPATH_GPIO_ERRINTR_MASK; - ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask, - dd->ipath_gpio_mask); - } - return 0; -} - -/** - * ipath_setup_pe_setextled - set the state of the two external LEDs - * @dd: the infinipath device - * @lst: the L state - * @ltst: the LT state - - * These LEDs indicate the physical and logical state of IB link. - * For this chip (at least with recommended board pinouts), LED1 - * is Yellow (logical state) and LED2 is Green (physical state), - * - * Note: We try to match the Mellanox HCA LED behavior as best - * we can. Green indicates physical link state is OK (something is - * plugged in, and we can train). - * Amber indicates the link is logically up (ACTIVE). - * Mellanox further blinks the amber LED to indicate data packet - * activity, but we have no hardware support for that, so it would - * require waking up every 10-20 msecs and checking the counters - * on the chip, and then turning the LED off if appropriate. That's - * visible overhead, so not something we will do. - * - */ -static void ipath_setup_pe_setextled(struct ipath_devdata *dd, u64 lst, - u64 ltst) -{ - u64 extctl; - unsigned long flags = 0; - - /* the diags use the LED to indicate diag info, so we leave - * the external LED alone when the diags are running */ - if (ipath_diag_inuse) - return; - - /* Allow override of LED display for, e.g. Locating system in rack */ - if (dd->ipath_led_override) { - ltst = (dd->ipath_led_override & IPATH_LED_PHYS) - ? INFINIPATH_IBCS_LT_STATE_LINKUP - : INFINIPATH_IBCS_LT_STATE_DISABLED; - lst = (dd->ipath_led_override & IPATH_LED_LOG) - ? INFINIPATH_IBCS_L_STATE_ACTIVE - : INFINIPATH_IBCS_L_STATE_DOWN; - } - - spin_lock_irqsave(&dd->ipath_gpio_lock, flags); - extctl = dd->ipath_extctrl & ~(INFINIPATH_EXTC_LED1PRIPORT_ON | - INFINIPATH_EXTC_LED2PRIPORT_ON); - - if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP) - extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON; - if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE) - extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON; - dd->ipath_extctrl = extctl; - ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl); - spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags); -} - -/** - * ipath_setup_pe_cleanup - clean up any per-chip chip-specific stuff - * @dd: the infinipath device - * - * This is called during driver unload. - * We do the pci_disable_msi here, not in generic code, because it - * isn't used for the HT chips. If we do end up needing pci_enable_msi - * at some point in the future for HT, we'll move the call back - * into the main init_one code. - */ -static void ipath_setup_pe_cleanup(struct ipath_devdata *dd) -{ - dd->ipath_msi_lo = 0; /* just in case unload fails */ - pci_disable_msi(dd->pcidev); -} - -static void ipath_6120_pcie_params(struct ipath_devdata *dd) -{ - u16 linkstat, speed; - int pos; - - pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP); - if (!pos) { - ipath_dev_err(dd, "Can't find PCI Express capability!\n"); - goto bail; - } - - pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA, - &linkstat); - /* - * speed is bits 0-4, linkwidth is bits 4-8 - * no defines for them in headers - */ - speed = linkstat & 0xf; - linkstat >>= 4; - linkstat &= 0x1f; - dd->ipath_lbus_width = linkstat; - - switch (speed) { - case 1: - dd->ipath_lbus_speed = 2500; /* Gen1, 2.5GHz */ - break; - case 2: - dd->ipath_lbus_speed = 5000; /* Gen1, 5GHz */ - break; - default: /* not defined, assume gen1 */ - dd->ipath_lbus_speed = 2500; - break; - } - - if (linkstat < 8) - ipath_dev_err(dd, - "PCIe width %u (x8 HCA), performance reduced\n", - linkstat); - else - ipath_cdbg(VERBOSE, "PCIe speed %u width %u (x8 HCA)\n", - dd->ipath_lbus_speed, linkstat); - - if (speed != 1) - ipath_dev_err(dd, - "PCIe linkspeed %u is incorrect; " - "should be 1 (2500)!\n", speed); -bail: - /* fill in string, even on errors */ - snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info), - "PCIe,%uMHz,x%u\n", - dd->ipath_lbus_speed, - dd->ipath_lbus_width); - - return; -} - -/** - * ipath_setup_pe_config - setup PCIe config related stuff - * @dd: the infinipath device - * @pdev: the PCI device - * - * The pci_enable_msi() call will fail on systems with MSI quirks - * such as those with AMD8131, even if the device of interest is not - * attached to that device, (in the 2.6.13 - 2.6.15 kernels, at least, fixed - * late in 2.6.16). - * All that can be done is to edit the kernel source to remove the quirk - * check until that is fixed. - * We do not need to call enable_msi() for our HyperTransport chip, - * even though it uses MSI, and we want to avoid the quirk warning, so - * So we call enable_msi only for PCIe. If we do end up needing - * pci_enable_msi at some point in the future for HT, we'll move the - * call back into the main init_one code. - * We save the msi lo and hi values, so we can restore them after - * chip reset (the kernel PCI infrastructure doesn't yet handle that - * correctly). - */ -static int ipath_setup_pe_config(struct ipath_devdata *dd, - struct pci_dev *pdev) -{ - int pos, ret; - - dd->ipath_msi_lo = 0; /* used as a flag during reset processing */ - ret = pci_enable_msi(dd->pcidev); - if (ret) - ipath_dev_err(dd, "pci_enable_msi failed: %d, " - "interrupts may not work\n", ret); - /* continue even if it fails, we may still be OK... */ - dd->ipath_irq = pdev->irq; - - if ((pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) { - u16 control; - pci_read_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO, - &dd->ipath_msi_lo); - pci_read_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI, - &dd->ipath_msi_hi); - pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, - &control); - /* now save the data (vector) info */ - pci_read_config_word(dd->pcidev, - pos + ((control & PCI_MSI_FLAGS_64BIT) - ? 12 : 8), - &dd->ipath_msi_data); - ipath_cdbg(VERBOSE, "Read msi data 0x%x from config offset " - "0x%x, control=0x%x\n", dd->ipath_msi_data, - pos + ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8), - control); - /* we save the cachelinesize also, although it doesn't - * really matter */ - pci_read_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, - &dd->ipath_pci_cacheline); - } else - ipath_dev_err(dd, "Can't find MSI capability, " - "can't save MSI settings for reset\n"); - - ipath_6120_pcie_params(dd); - - dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; - dd->ipath_link_speed_supported = IPATH_IB_SDR; - dd->ipath_link_width_enabled = IB_WIDTH_4X; - dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported; - /* these can't change for this chip, so set once */ - dd->ipath_link_width_active = dd->ipath_link_width_enabled; - dd->ipath_link_speed_active = dd->ipath_link_speed_enabled; - return 0; -} - -static void ipath_init_pe_variables(struct ipath_devdata *dd) -{ - /* - * setup the register offsets, since they are different for each - * chip - */ - dd->ipath_kregs = &ipath_pe_kregs; - dd->ipath_cregs = &ipath_pe_cregs; - - /* - * bits for selecting i2c direction and values, - * used for I2C serial flash - */ - dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM; - dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM; - dd->ipath_gpio_sda = IPATH_GPIO_SDA; - dd->ipath_gpio_scl = IPATH_GPIO_SCL; - - /* - * Fill in data for field-values that change in newer chips. - * We dynamically specify only the mask for LINKTRAININGSTATE - * and only the shift for LINKSTATE, as they are the only ones - * that change. Also precalculate the 3 link states of interest - * and the combined mask. - */ - dd->ibcs_ls_shift = IBA6120_IBCS_LINKSTATE_SHIFT; - dd->ibcs_lts_mask = IBA6120_IBCS_LINKTRAININGSTATE_MASK; - dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK << - dd->ibcs_ls_shift) | dd->ibcs_lts_mask; - dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP << - INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | - (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift); - dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP << - INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | - (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift); - dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP << - INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | - (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift); - - /* - * Fill in data for ibcc field-values that change in newer chips. - * We dynamically specify only the mask for LINKINITCMD - * and only the shift for LINKCMD and MAXPKTLEN, as they are - * the only ones that change. - */ - dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK; - dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT; - dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT; - - /* Fill in shifts for RcvCtrl. */ - dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT; - dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT; - dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT; - dd->ipath_r_portcfg_shift = 0; /* Not on IBA6120 */ - - /* variables for sanity checking interrupt and errors */ - dd->ipath_hwe_bitsextant = - (INFINIPATH_HWE_RXEMEMPARITYERR_MASK << - INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) | - (INFINIPATH_HWE_TXEMEMPARITYERR_MASK << - INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) | - (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK << - INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) | - INFINIPATH_HWE_PCIE1PLLFAILED | - INFINIPATH_HWE_PCIE0PLLFAILED | - INFINIPATH_HWE_PCIEPOISONEDTLP | - INFINIPATH_HWE_PCIECPLTIMEOUT | - INFINIPATH_HWE_PCIEBUSPARITYXTLH | - INFINIPATH_HWE_PCIEBUSPARITYXADM | - INFINIPATH_HWE_PCIEBUSPARITYRADM | - INFINIPATH_HWE_MEMBISTFAILED | - INFINIPATH_HWE_COREPLL_FBSLIP | - INFINIPATH_HWE_COREPLL_RFSLIP | - INFINIPATH_HWE_SERDESPLLFAILED | - INFINIPATH_HWE_IBCBUSTOSPCPARITYERR | - INFINIPATH_HWE_IBCBUSFRSPCPARITYERR; - dd->ipath_i_bitsextant = - (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) | - (INFINIPATH_I_RCVAVAIL_MASK << - INFINIPATH_I_RCVAVAIL_SHIFT) | - INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT | - INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO; - dd->ipath_e_bitsextant = - INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC | - INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN | - INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN | - INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR | - INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP | - INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION | - INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL | - INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN | - INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK | - INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN | - INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN | - INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT | - INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | - INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED | - INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET | - INFINIPATH_E_HARDWARE; - - dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK; - dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK; - dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT; - dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT; - - /* - * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity. - * 2 is Some Misc, 3 is reserved for future. - */ - dd->ipath_eep_st_masks[0].hwerrs_to_log = - INFINIPATH_HWE_TXEMEMPARITYERR_MASK << - INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT; - - /* Ignore errors in PIO/PBC on systems with unordered write-combining */ - if (ipath_unordered_wc()) - dd->ipath_eep_st_masks[0].hwerrs_to_log &= ~TXE_PIO_PARITY; - - dd->ipath_eep_st_masks[1].hwerrs_to_log = - INFINIPATH_HWE_RXEMEMPARITYERR_MASK << - INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT; - - dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET; - dd->delay_mult = 2; /* SDR, 4X, can't change */ -} - -/* setup the MSI stuff again after a reset. I'd like to just call - * pci_enable_msi() and request_irq() again, but when I do that, - * the MSI enable bit doesn't get set in the command word, and - * we switch to to a different interrupt vector, which is confusing, - * so I instead just do it all inline. Perhaps somehow can tie this - * into the PCIe hotplug support at some point - * Note, because I'm doing it all here, I don't call pci_disable_msi() - * or free_irq() at the start of ipath_setup_pe_reset(). - */ -static int ipath_reinit_msi(struct ipath_devdata *dd) -{ - int pos; - u16 control; - int ret; - - if (!dd->ipath_msi_lo) { - dev_info(&dd->pcidev->dev, "Can't restore MSI config, " - "initial setup failed?\n"); - ret = 0; - goto bail; - } - - if (!(pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) { - ipath_dev_err(dd, "Can't find MSI capability, " - "can't restore MSI settings\n"); - ret = 0; - goto bail; - } - ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n", - dd->ipath_msi_lo, pos + PCI_MSI_ADDRESS_LO); - pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO, - dd->ipath_msi_lo); - ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n", - dd->ipath_msi_hi, pos + PCI_MSI_ADDRESS_HI); - pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI, - dd->ipath_msi_hi); - pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, &control); - if (!(control & PCI_MSI_FLAGS_ENABLE)) { - ipath_cdbg(VERBOSE, "MSI control at off %x was %x, " - "setting MSI enable (%x)\n", pos + PCI_MSI_FLAGS, - control, control | PCI_MSI_FLAGS_ENABLE); - control |= PCI_MSI_FLAGS_ENABLE; - pci_write_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, - control); - } - /* now rewrite the data (vector) info */ - pci_write_config_word(dd->pcidev, pos + - ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8), - dd->ipath_msi_data); - /* we restore the cachelinesize also, although it doesn't really - * matter */ - pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, - dd->ipath_pci_cacheline); - /* and now set the pci master bit again */ - pci_set_master(dd->pcidev); - ret = 1; - -bail: - return ret; -} - -/* This routine sleeps, so it can only be called from user context, not - * from interrupt context. If we need interrupt context, we can split - * it into two routines. -*/ -static int ipath_setup_pe_reset(struct ipath_devdata *dd) -{ - u64 val; - int i; - int ret; - u16 cmdval; - - pci_read_config_word(dd->pcidev, PCI_COMMAND, &cmdval); - - /* Use ERROR so it shows up in logs, etc. */ - ipath_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->ipath_unit); - /* keep chip from being accessed in a few places */ - dd->ipath_flags &= ~(IPATH_INITTED|IPATH_PRESENT); - val = dd->ipath_control | INFINIPATH_C_RESET; - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val); - mb(); - - for (i = 1; i <= 5; i++) { - int r; - /* allow MBIST, etc. to complete; longer on each retry. - * We sometimes get machine checks from bus timeout if no - * response, so for now, make it *really* long. - */ - msleep(1000 + (1 + i) * 2000); - if ((r = - pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, - dd->ipath_pcibar0))) - ipath_dev_err(dd, "rewrite of BAR0 failed: %d\n", - r); - if ((r = - pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, - dd->ipath_pcibar1))) - ipath_dev_err(dd, "rewrite of BAR1 failed: %d\n", - r); - /* now re-enable memory access */ - pci_write_config_word(dd->pcidev, PCI_COMMAND, cmdval); - if ((r = pci_enable_device(dd->pcidev))) - ipath_dev_err(dd, "pci_enable_device failed after " - "reset: %d\n", r); - /* - * whether it fully enabled or not, mark as present, - * again (but not INITTED) - */ - dd->ipath_flags |= IPATH_PRESENT; - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision); - if (val == dd->ipath_revision) { - ipath_cdbg(VERBOSE, "Got matching revision " - "register %llx on try %d\n", - (unsigned long long) val, i); - ret = ipath_reinit_msi(dd); - goto bail; - } - /* Probably getting -1 back */ - ipath_dbg("Didn't get expected revision register, " - "got %llx, try %d\n", (unsigned long long) val, - i + 1); - } - ret = 0; /* failed */ - -bail: - if (ret) - ipath_6120_pcie_params(dd); - return ret; -} - -/** - * ipath_pe_put_tid - write a TID in chip - * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to update - * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected - * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing - * - * This exists as a separate routine to allow for special locking etc. - * It's used for both the full cleanup on exit, as well as the normal - * setup and teardown. - */ -static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr, - u32 type, unsigned long pa) -{ - u32 __iomem *tidp32 = (u32 __iomem *)tidptr; - unsigned long flags = 0; /* keep gcc quiet */ - int tidx; - spinlock_t *tidlockp; - - if (!dd->ipath_kregbase) - return; - - if (pa != dd->ipath_tidinvalid) { - if (pa & ((1U << 11) - 1)) { - dev_info(&dd->pcidev->dev, "BUG: physaddr %lx " - "not 2KB aligned!\n", pa); - return; - } - pa >>= 11; - /* paranoia check */ - if (pa & ~INFINIPATH_RT_ADDR_MASK) - ipath_dev_err(dd, - "BUG: Physical page address 0x%lx " - "has bits set in 31-29\n", pa); - - if (type == RCVHQ_RCV_TYPE_EAGER) - pa |= dd->ipath_tidtemplate; - else /* for now, always full 4KB page */ - pa |= 2 << 29; - } - - /* - * Workaround chip bug 9437 by writing the scratch register - * before and after the TID, and with an io write barrier. - * We use a spinlock around the writes, so they can't intermix - * with other TID (eager or expected) writes (the chip bug - * is triggered by back to back TID writes). Unfortunately, this - * call can be done from interrupt level for the port 0 eager TIDs, - * so we have to use irqsave locks. - */ - /* - * Assumes tidptr always > ipath_egrtidbase - * if type == RCVHQ_RCV_TYPE_EAGER. - */ - tidx = tidptr - dd->ipath_egrtidbase; - - tidlockp = (type == RCVHQ_RCV_TYPE_EAGER && tidx < dd->ipath_rcvegrcnt) - ? &dd->ipath_kernel_tid_lock : &dd->ipath_user_tid_lock; - spin_lock_irqsave(tidlockp, flags); - ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xfeeddeaf); - writel(pa, tidp32); - ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xdeadbeef); - mmiowb(); - spin_unlock_irqrestore(tidlockp, flags); -} - -/** - * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher - * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to update - * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected - * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing - * - * This exists as a separate routine to allow for selection of the - * appropriate "flavor". The static calls in cleanup just use the - * revision-agnostic form, as they are not performance critical. - */ -static void ipath_pe_put_tid_2(struct ipath_devdata *dd, u64 __iomem *tidptr, - u32 type, unsigned long pa) -{ - u32 __iomem *tidp32 = (u32 __iomem *)tidptr; - u32 tidx; - - if (!dd->ipath_kregbase) - return; - - if (pa != dd->ipath_tidinvalid) { - if (pa & ((1U << 11) - 1)) { - dev_info(&dd->pcidev->dev, "BUG: physaddr %lx " - "not 2KB aligned!\n", pa); - return; - } - pa >>= 11; - /* paranoia check */ - if (pa & ~INFINIPATH_RT_ADDR_MASK) - ipath_dev_err(dd, - "BUG: Physical page address 0x%lx " - "has bits set in 31-29\n", pa); - - if (type == RCVHQ_RCV_TYPE_EAGER) - pa |= dd->ipath_tidtemplate; - else /* for now, always full 4KB page */ - pa |= 2 << 29; - } - tidx = tidptr - dd->ipath_egrtidbase; - writel(pa, tidp32); - mmiowb(); -} - - -/** - * ipath_pe_clear_tid - clear all TID entries for a port, expected and eager - * @dd: the infinipath device - * @port: the port - * - * clear all TID entries for a port, expected and eager. - * Used from ipath_close(). On this chip, TIDs are only 32 bits, - * not 64, but they are still on 64 bit boundaries, so tidbase - * is declared as u64 * for the pointer math, even though we write 32 bits - */ -static void ipath_pe_clear_tids(struct ipath_devdata *dd, unsigned port) -{ - u64 __iomem *tidbase; - unsigned long tidinv; - int i; - - if (!dd->ipath_kregbase) - return; - - ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port); - - tidinv = dd->ipath_tidinvalid; - tidbase = (u64 __iomem *) - ((char __iomem *)(dd->ipath_kregbase) + - dd->ipath_rcvtidbase + - port * dd->ipath_rcvtidcnt * sizeof(*tidbase)); - - for (i = 0; i < dd->ipath_rcvtidcnt; i++) - dd->ipath_f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, - tidinv); - - tidbase = (u64 __iomem *) - ((char __iomem *)(dd->ipath_kregbase) + - dd->ipath_rcvegrbase + - port * dd->ipath_rcvegrcnt * sizeof(*tidbase)); - - for (i = 0; i < dd->ipath_rcvegrcnt; i++) - dd->ipath_f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, - tidinv); -} - -/** - * ipath_pe_tidtemplate - setup constants for TID updates - * @dd: the infinipath device - * - * We setup stuff that we use a lot, to avoid calculating each time - */ -static void ipath_pe_tidtemplate(struct ipath_devdata *dd) -{ - u32 egrsize = dd->ipath_rcvegrbufsize; - - /* For now, we always allocate 4KB buffers (at init) so we can - * receive max size packets. We may want a module parameter to - * specify 2KB or 4KB and/or make be per port instead of per device - * for those who want to reduce memory footprint. Note that the - * ipath_rcvhdrentsize size must be large enough to hold the largest - * IB header (currently 96 bytes) that we expect to handle (plus of - * course the 2 dwords of RHF). - */ - if (egrsize == 2048) - dd->ipath_tidtemplate = 1U << 29; - else if (egrsize == 4096) - dd->ipath_tidtemplate = 2U << 29; - else { - egrsize = 4096; - dev_info(&dd->pcidev->dev, "BUG: unsupported egrbufsize " - "%u, using %u\n", dd->ipath_rcvegrbufsize, - egrsize); - dd->ipath_tidtemplate = 2U << 29; - } - dd->ipath_tidinvalid = 0; -} - -static int ipath_pe_early_init(struct ipath_devdata *dd) -{ - dd->ipath_flags |= IPATH_4BYTE_TID; - if (ipath_unordered_wc()) - dd->ipath_flags |= IPATH_PIO_FLUSH_WC; - - /* - * For openfabrics, we need to be able to handle an IB header of - * 24 dwords. HT chip has arbitrary sized receive buffers, so we - * made them the same size as the PIO buffers. This chip does not - * handle arbitrary size buffers, so we need the header large enough - * to handle largest IB header, but still have room for a 2KB MTU - * standard IB packet. - */ - dd->ipath_rcvhdrentsize = 24; - dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE; - dd->ipath_rhf_offset = 0; - dd->ipath_egrtidbase = (u64 __iomem *) - ((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase); - - dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048; - /* - * the min() check here is currently a nop, but it may not always - * be, depending on just how we do ipath_rcvegrbufsize - */ - dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k : - dd->ipath_piosize2k, - dd->ipath_rcvegrbufsize + - (dd->ipath_rcvhdrentsize << 2)); - dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen; - - /* - * We can request a receive interrupt for 1 or - * more packets from current offset. For now, we set this - * up for a single packet. - */ - dd->ipath_rhdrhead_intr_off = 1ULL<<32; - - ipath_get_eeprom_info(dd); - - return 0; -} - -int __attribute__((weak)) ipath_unordered_wc(void) -{ - return 0; -} - -/** - * ipath_init_pe_get_base_info - set chip-specific flags for user code - * @pd: the infinipath port - * @kbase: ipath_base_info pointer - * - * We set the PCIE flag because the lower bandwidth on PCIe vs - * HyperTransport can affect some user packet algorithms. - */ -static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase) -{ - struct ipath_base_info *kinfo = kbase; - struct ipath_devdata *dd; - - if (ipath_unordered_wc()) { - kinfo->spi_runtime_flags |= IPATH_RUNTIME_FORCE_WC_ORDER; - ipath_cdbg(PROC, "Intel processor, forcing WC order\n"); - } - else - ipath_cdbg(PROC, "Not Intel processor, WC ordered\n"); - - if (pd == NULL) - goto done; - - dd = pd->port_dd; - -done: - kinfo->spi_runtime_flags |= IPATH_RUNTIME_PCIE | - IPATH_RUNTIME_FORCE_PIOAVAIL | IPATH_RUNTIME_PIO_REGSWAPPED; - return 0; -} - -static void ipath_pe_free_irq(struct ipath_devdata *dd) -{ - free_irq(dd->ipath_irq, dd); - dd->ipath_irq = 0; -} - - -static struct ipath_message_header * -ipath_pe_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr) -{ - return (struct ipath_message_header *) - &rhf_addr[sizeof(u64) / sizeof(u32)]; -} - -static void ipath_pe_config_ports(struct ipath_devdata *dd, ushort cfgports) -{ - dd->ipath_portcnt = - ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); - dd->ipath_p0_rcvegrcnt = - ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt); -} - -static void ipath_pe_read_counters(struct ipath_devdata *dd, - struct infinipath_counters *cntrs) -{ - cntrs->LBIntCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt)); - cntrs->LBFlowStallCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt)); - cntrs->TxSDmaDescCnt = 0; - cntrs->TxUnsupVLErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt)); - cntrs->TxDataPktCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt)); - cntrs->TxFlowPktCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt)); - cntrs->TxDwordCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt)); - cntrs->TxLenErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt)); - cntrs->TxMaxMinLenErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt)); - cntrs->TxUnderrunCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt)); - cntrs->TxFlowStallCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt)); - cntrs->TxDroppedPktCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt)); - cntrs->RxDroppedPktCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt)); - cntrs->RxDataPktCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt)); - cntrs->RxFlowPktCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt)); - cntrs->RxDwordCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt)); - cntrs->RxLenErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt)); - cntrs->RxMaxMinLenErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt)); - cntrs->RxICRCErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt)); - cntrs->RxVCRCErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt)); - cntrs->RxFlowCtrlErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt)); - cntrs->RxBadFormatCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt)); - cntrs->RxLinkProblemCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt)); - cntrs->RxEBPCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt)); - cntrs->RxLPCRCErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt)); - cntrs->RxBufOvflCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt)); - cntrs->RxTIDFullErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt)); - cntrs->RxTIDValidErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt)); - cntrs->RxPKeyMismatchCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt)); - cntrs->RxP0HdrEgrOvflCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt)); - cntrs->RxP1HdrEgrOvflCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt)); - cntrs->RxP2HdrEgrOvflCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt)); - cntrs->RxP3HdrEgrOvflCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt)); - cntrs->RxP4HdrEgrOvflCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt)); - cntrs->RxP5HdrEgrOvflCnt = 0; - cntrs->RxP6HdrEgrOvflCnt = 0; - cntrs->RxP7HdrEgrOvflCnt = 0; - cntrs->RxP8HdrEgrOvflCnt = 0; - cntrs->RxP9HdrEgrOvflCnt = 0; - cntrs->RxP10HdrEgrOvflCnt = 0; - cntrs->RxP11HdrEgrOvflCnt = 0; - cntrs->RxP12HdrEgrOvflCnt = 0; - cntrs->RxP13HdrEgrOvflCnt = 0; - cntrs->RxP14HdrEgrOvflCnt = 0; - cntrs->RxP15HdrEgrOvflCnt = 0; - cntrs->RxP16HdrEgrOvflCnt = 0; - cntrs->IBStatusChangeCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt)); - cntrs->IBLinkErrRecoveryCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt)); - cntrs->IBLinkDownedCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt)); - cntrs->IBSymbolErrCnt = - ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt)); - cntrs->RxVL15DroppedPktCnt = 0; - cntrs->RxOtherLocalPhyErrCnt = 0; - cntrs->PcieRetryBufDiagQwordCnt = 0; - cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs; - cntrs->LocalLinkIntegrityErrCnt = dd->ipath_lli_errs; - cntrs->RxVlErrCnt = 0; - cntrs->RxDlidFltrCnt = 0; -} - - -/* no interrupt fallback for these chips */ -static int ipath_pe_nointr_fallback(struct ipath_devdata *dd) -{ - return 0; -} - - -/* - * reset the XGXS (between serdes and IBC). Slightly less intrusive - * than resetting the IBC or external link state, and useful in some - * cases to cause some retraining. To do this right, we reset IBC - * as well. - */ -static void ipath_pe_xgxs_reset(struct ipath_devdata *dd) -{ - u64 val, prev_val; - - prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); - val = prev_val | INFINIPATH_XGXS_RESET; - prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, - dd->ipath_control & ~INFINIPATH_C_LINKENABLE); - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val); - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, - dd->ipath_control); -} - - -static int ipath_pe_get_ib_cfg(struct ipath_devdata *dd, int which) -{ - int ret; - - switch (which) { - case IPATH_IB_CFG_LWID: - ret = dd->ipath_link_width_active; - break; - case IPATH_IB_CFG_SPD: - ret = dd->ipath_link_speed_active; - break; - case IPATH_IB_CFG_LWID_ENB: - ret = dd->ipath_link_width_enabled; - break; - case IPATH_IB_CFG_SPD_ENB: - ret = dd->ipath_link_speed_enabled; - break; - default: - ret = -ENOTSUPP; - break; - } - return ret; -} - - -/* we assume range checking is already done, if needed */ -static int ipath_pe_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val) -{ - int ret = 0; - - if (which == IPATH_IB_CFG_LWID_ENB) - dd->ipath_link_width_enabled = val; - else if (which == IPATH_IB_CFG_SPD_ENB) - dd->ipath_link_speed_enabled = val; - else - ret = -ENOTSUPP; - return ret; -} - -static void ipath_pe_config_jint(struct ipath_devdata *dd, u16 a, u16 b) -{ -} - - -static int ipath_pe_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs) -{ - if (ibup) { - if (dd->ibdeltainprog) { - dd->ibdeltainprog = 0; - dd->ibsymdelta += - ipath_read_creg32(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt) - - dd->ibsymsnap; - dd->iblnkerrdelta += - ipath_read_creg32(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt) - - dd->iblnkerrsnap; - } - } else { - dd->ipath_lli_counter = 0; - if (!dd->ibdeltainprog) { - dd->ibdeltainprog = 1; - dd->ibsymsnap = - ipath_read_creg32(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt); - dd->iblnkerrsnap = - ipath_read_creg32(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt); - } - } - - ipath_setup_pe_setextled(dd, ipath_ib_linkstate(dd, ibcs), - ipath_ib_linktrstate(dd, ibcs)); - return 0; -} - - -/** - * ipath_init_iba6120_funcs - set up the chip-specific function pointers - * @dd: the infinipath device - * - * This is global, and is called directly at init to set up the - * chip-specific function pointers for later use. - */ -void ipath_init_iba6120_funcs(struct ipath_devdata *dd) -{ - dd->ipath_f_intrsetup = ipath_pe_intconfig; - dd->ipath_f_bus = ipath_setup_pe_config; - dd->ipath_f_reset = ipath_setup_pe_reset; - dd->ipath_f_get_boardname = ipath_pe_boardname; - dd->ipath_f_init_hwerrors = ipath_pe_init_hwerrors; - dd->ipath_f_early_init = ipath_pe_early_init; - dd->ipath_f_handle_hwerrors = ipath_pe_handle_hwerrors; - dd->ipath_f_quiet_serdes = ipath_pe_quiet_serdes; - dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes; - dd->ipath_f_clear_tids = ipath_pe_clear_tids; - /* - * _f_put_tid may get changed after we read the chip revision, - * but we start with the safe version for all revs - */ - dd->ipath_f_put_tid = ipath_pe_put_tid; - dd->ipath_f_cleanup = ipath_setup_pe_cleanup; - dd->ipath_f_setextled = ipath_setup_pe_setextled; - dd->ipath_f_get_base_info = ipath_pe_get_base_info; - dd->ipath_f_free_irq = ipath_pe_free_irq; - dd->ipath_f_tidtemplate = ipath_pe_tidtemplate; - dd->ipath_f_intr_fallback = ipath_pe_nointr_fallback; - dd->ipath_f_xgxs_reset = ipath_pe_xgxs_reset; - dd->ipath_f_get_msgheader = ipath_pe_get_msgheader; - dd->ipath_f_config_ports = ipath_pe_config_ports; - dd->ipath_f_read_counters = ipath_pe_read_counters; - dd->ipath_f_get_ib_cfg = ipath_pe_get_ib_cfg; - dd->ipath_f_set_ib_cfg = ipath_pe_set_ib_cfg; - dd->ipath_f_config_jint = ipath_pe_config_jint; - dd->ipath_f_ib_updown = ipath_pe_ib_updown; - - - /* initialize chip-specific variables */ - ipath_init_pe_variables(dd); -} - diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c deleted file mode 100644 index 34b778ed97fc..000000000000 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ /dev/null @@ -1,2631 +0,0 @@ -/* - * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. - * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ -/* - * This file contains all of the code that is specific to the - * InfiniPath 7220 chip (except that specific to the SerDes) - */ - -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <rdma/ib_verbs.h> - -#include "ipath_kernel.h" -#include "ipath_registers.h" -#include "ipath_7220.h" - -static void ipath_setup_7220_setextled(struct ipath_devdata *, u64, u64); - -static unsigned ipath_compat_ddr_negotiate = 1; - -module_param_named(compat_ddr_negotiate, ipath_compat_ddr_negotiate, uint, - S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(compat_ddr_negotiate, - "Attempt pre-IBTA 1.2 DDR speed negotiation"); - -static unsigned ipath_sdma_fetch_arb = 1; -module_param_named(fetch_arb, ipath_sdma_fetch_arb, uint, S_IRUGO); -MODULE_PARM_DESC(fetch_arb, "IBA7220: change SDMA descriptor arbitration"); - -/* - * This file contains almost all the chip-specific register information and - * access functions for the QLogic InfiniPath 7220 PCI-Express chip, with the - * exception of SerDes support, which in in ipath_sd7220.c. - * - * This lists the InfiniPath registers, in the actual chip layout. - * This structure should never be directly accessed. - */ -struct _infinipath_do_not_use_kernel_regs { - unsigned long long Revision; - unsigned long long Control; - unsigned long long PageAlign; - unsigned long long PortCnt; - unsigned long long DebugPortSelect; - unsigned long long DebugSigsIntSel; /* was Reserved0;*/ - unsigned long long SendRegBase; - unsigned long long UserRegBase; - unsigned long long CounterRegBase; - unsigned long long Scratch; - unsigned long long EEPROMAddrCmd; /* was Reserved1; */ - unsigned long long EEPROMData; /* was Reserved2; */ - unsigned long long IntBlocked; - unsigned long long IntMask; - unsigned long long IntStatus; - unsigned long long IntClear; - unsigned long long ErrorMask; - unsigned long long ErrorStatus; - unsigned long long ErrorClear; - unsigned long long HwErrMask; - unsigned long long HwErrStatus; - unsigned long long HwErrClear; - unsigned long long HwDiagCtrl; - unsigned long long MDIO; - unsigned long long IBCStatus; - unsigned long long IBCCtrl; - unsigned long long ExtStatus; - unsigned long long ExtCtrl; - unsigned long long GPIOOut; - unsigned long long GPIOMask; - unsigned long long GPIOStatus; - unsigned long long GPIOClear; - unsigned long long RcvCtrl; - unsigned long long RcvBTHQP; - unsigned long long RcvHdrSize; - unsigned long long RcvHdrCnt; - unsigned long long RcvHdrEntSize; - unsigned long long RcvTIDBase; - unsigned long long RcvTIDCnt; - unsigned long long RcvEgrBase; - unsigned long long RcvEgrCnt; - unsigned long long RcvBufBase; - unsigned long long RcvBufSize; - unsigned long long RxIntMemBase; - unsigned long long RxIntMemSize; - unsigned long long RcvPartitionKey; - unsigned long long RcvQPMulticastPort; - unsigned long long RcvPktLEDCnt; - unsigned long long IBCDDRCtrl; - unsigned long long HRTBT_GUID; - unsigned long long IB_SDTEST_IF_TX; - unsigned long long IB_SDTEST_IF_RX; - unsigned long long IBCDDRCtrl2; - unsigned long long IBCDDRStatus; - unsigned long long JIntReload; - unsigned long long IBNCModeCtrl; - unsigned long long SendCtrl; - unsigned long long SendBufBase; - unsigned long long SendBufSize; - unsigned long long SendBufCnt; - unsigned long long SendAvailAddr; - unsigned long long TxIntMemBase; - unsigned long long TxIntMemSize; - unsigned long long SendDmaBase; - unsigned long long SendDmaLenGen; - unsigned long long SendDmaTail; - unsigned long long SendDmaHead; - unsigned long long SendDmaHeadAddr; - unsigned long long SendDmaBufMask0; - unsigned long long SendDmaBufMask1; - unsigned long long SendDmaBufMask2; - unsigned long long SendDmaStatus; - unsigned long long SendBufferError; - unsigned long long SendBufferErrorCONT1; - unsigned long long SendBufErr2; /* was Reserved6SBE[0/6] */ - unsigned long long Reserved6L[2]; - unsigned long long AvailUpdCount; - unsigned long long RcvHdrAddr0; - unsigned long long RcvHdrAddrs[16]; /* Why enumerate? */ - unsigned long long Reserved7hdtl; /* Align next to 300 */ - unsigned long long RcvHdrTailAddr0; /* 300, like others */ - unsigned long long RcvHdrTailAddrs[16]; - unsigned long long Reserved9SW[7]; /* was [8]; we have 17 ports */ - unsigned long long IbsdEpbAccCtl; /* IB Serdes EPB access control */ - unsigned long long IbsdEpbTransReg; /* IB Serdes EPB Transaction */ - unsigned long long Reserved10sds; /* was SerdesStatus on */ - unsigned long long XGXSConfig; - unsigned long long IBSerDesCtrl; /* Was IBPLLCfg on Monty */ - unsigned long long EEPCtlStat; /* for "boot" EEPROM/FLASH */ - unsigned long long EEPAddrCmd; - unsigned long long EEPData; - unsigned long long PcieEpbAccCtl; - unsigned long long PcieEpbTransCtl; - unsigned long long EfuseCtl; /* E-Fuse control */ - unsigned long long EfuseData[4]; - unsigned long long ProcMon; - /* this chip moves following two from previous 200, 208 */ - unsigned long long PCIeRBufTestReg0; - unsigned long long PCIeRBufTestReg1; - /* added for this chip */ - unsigned long long PCIeRBufTestReg2; - unsigned long long PCIeRBufTestReg3; - /* added for this chip, debug only */ - unsigned long long SPC_JTAG_ACCESS_REG; - unsigned long long LAControlReg; - unsigned long long GPIODebugSelReg; - unsigned long long DebugPortValueReg; - /* added for this chip, DMA */ - unsigned long long SendDmaBufUsed[3]; - unsigned long long SendDmaReqTagUsed; - /* - * added for this chip, EFUSE: note that these program 64-bit - * words 2 and 3 */ - unsigned long long efuse_pgm_data[2]; - unsigned long long Reserved11LAalign[10]; /* Skip 4B0..4F8 */ - /* we have 30 regs for DDS and RXEQ in IB SERDES */ - unsigned long long SerDesDDSRXEQ[30]; - unsigned long long Reserved12LAalign[2]; /* Skip 5F0, 5F8 */ - /* added for LA debug support */ - unsigned long long LAMemory[32]; -}; - -struct _infinipath_do_not_use_counters { - __u64 LBIntCnt; - __u64 LBFlowStallCnt; - __u64 TxSDmaDescCnt; /* was Reserved1 */ - __u64 TxUnsupVLErrCnt; - __u64 TxDataPktCnt; - __u64 TxFlowPktCnt; - __u64 TxDwordCnt; - __u64 TxLenErrCnt; - __u64 TxMaxMinLenErrCnt; - __u64 TxUnderrunCnt; - __u64 TxFlowStallCnt; - __u64 TxDroppedPktCnt; - __u64 RxDroppedPktCnt; - __u64 RxDataPktCnt; - __u64 RxFlowPktCnt; - __u64 RxDwordCnt; - __u64 RxLenErrCnt; - __u64 RxMaxMinLenErrCnt; - __u64 RxICRCErrCnt; - __u64 RxVCRCErrCnt; - __u64 RxFlowCtrlErrCnt; - __u64 RxBadFormatCnt; - __u64 RxLinkProblemCnt; - __u64 RxEBPCnt; - __u64 RxLPCRCErrCnt; - __u64 RxBufOvflCnt; - __u64 RxTIDFullErrCnt; - __u64 RxTIDValidErrCnt; - __u64 RxPKeyMismatchCnt; - __u64 RxP0HdrEgrOvflCnt; - __u64 RxP1HdrEgrOvflCnt; - __u64 RxP2HdrEgrOvflCnt; - __u64 RxP3HdrEgrOvflCnt; - __u64 RxP4HdrEgrOvflCnt; - __u64 RxP5HdrEgrOvflCnt; - __u64 RxP6HdrEgrOvflCnt; - __u64 RxP7HdrEgrOvflCnt; - __u64 RxP8HdrEgrOvflCnt; - __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */ - __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */ - __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */ - __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */ - __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */ - __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */ - __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */ - __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */ - __u64 IBStatusChangeCnt; - __u64 IBLinkErrRecoveryCnt; - __u64 IBLinkDownedCnt; - __u64 IBSymbolErrCnt; - /* The following are new for IBA7220 */ - __u64 RxVL15DroppedPktCnt; - __u64 RxOtherLocalPhyErrCnt; - __u64 PcieRetryBufDiagQwordCnt; - __u64 ExcessBufferOvflCnt; - __u64 LocalLinkIntegrityErrCnt; - __u64 RxVlErrCnt; - __u64 RxDlidFltrCnt; - __u64 Reserved8[7]; - __u64 PSStat; - __u64 PSStart; - __u64 PSInterval; - __u64 PSRcvDataCount; - __u64 PSRcvPktsCount; - __u64 PSXmitDataCount; - __u64 PSXmitPktsCount; - __u64 PSXmitWaitCount; -}; - -#define IPATH_KREG_OFFSET(field) (offsetof( \ - struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) -#define IPATH_CREG_OFFSET(field) (offsetof( \ - struct _infinipath_do_not_use_counters, field) / sizeof(u64)) - -static const struct ipath_kregs ipath_7220_kregs = { - .kr_control = IPATH_KREG_OFFSET(Control), - .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase), - .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect), - .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear), - .kr_errormask = IPATH_KREG_OFFSET(ErrorMask), - .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus), - .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl), - .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus), - .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear), - .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask), - .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut), - .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus), - .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl), - .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear), - .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask), - .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus), - .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl), - .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus), - .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked), - .kr_intclear = IPATH_KREG_OFFSET(IntClear), - .kr_intmask = IPATH_KREG_OFFSET(IntMask), - .kr_intstatus = IPATH_KREG_OFFSET(IntStatus), - .kr_mdio = IPATH_KREG_OFFSET(MDIO), - .kr_pagealign = IPATH_KREG_OFFSET(PageAlign), - .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey), - .kr_portcnt = IPATH_KREG_OFFSET(PortCnt), - .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP), - .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase), - .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize), - .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl), - .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase), - .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt), - .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt), - .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize), - .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize), - .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase), - .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize), - .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase), - .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt), - .kr_revision = IPATH_KREG_OFFSET(Revision), - .kr_scratch = IPATH_KREG_OFFSET(Scratch), - .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError), - .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl), - .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendAvailAddr), - .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendBufBase), - .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendBufCnt), - .kr_sendpiosize = IPATH_KREG_OFFSET(SendBufSize), - .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase), - .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase), - .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize), - .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase), - - .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig), - - /* send dma related regs */ - .kr_senddmabase = IPATH_KREG_OFFSET(SendDmaBase), - .kr_senddmalengen = IPATH_KREG_OFFSET(SendDmaLenGen), - .kr_senddmatail = IPATH_KREG_OFFSET(SendDmaTail), - .kr_senddmahead = IPATH_KREG_OFFSET(SendDmaHead), - .kr_senddmaheadaddr = IPATH_KREG_OFFSET(SendDmaHeadAddr), - .kr_senddmabufmask0 = IPATH_KREG_OFFSET(SendDmaBufMask0), - .kr_senddmabufmask1 = IPATH_KREG_OFFSET(SendDmaBufMask1), - .kr_senddmabufmask2 = IPATH_KREG_OFFSET(SendDmaBufMask2), - .kr_senddmastatus = IPATH_KREG_OFFSET(SendDmaStatus), - - /* SerDes related regs */ - .kr_ibserdesctrl = IPATH_KREG_OFFSET(IBSerDesCtrl), - .kr_ib_epbacc = IPATH_KREG_OFFSET(IbsdEpbAccCtl), - .kr_ib_epbtrans = IPATH_KREG_OFFSET(IbsdEpbTransReg), - .kr_pcie_epbacc = IPATH_KREG_OFFSET(PcieEpbAccCtl), - .kr_pcie_epbtrans = IPATH_KREG_OFFSET(PcieEpbTransCtl), - .kr_ib_ddsrxeq = IPATH_KREG_OFFSET(SerDesDDSRXEQ), - - /* - * These should not be used directly via ipath_read_kreg64(), - * use them with ipath_read_kreg64_port() - */ - .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0), - .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0), - - /* - * The rcvpktled register controls one of the debug port signals, so - * a packet activity LED can be connected to it. - */ - .kr_rcvpktledcnt = IPATH_KREG_OFFSET(RcvPktLEDCnt), - .kr_pcierbuftestreg0 = IPATH_KREG_OFFSET(PCIeRBufTestReg0), - .kr_pcierbuftestreg1 = IPATH_KREG_OFFSET(PCIeRBufTestReg1), - - .kr_hrtbt_guid = IPATH_KREG_OFFSET(HRTBT_GUID), - .kr_ibcddrctrl = IPATH_KREG_OFFSET(IBCDDRCtrl), - .kr_ibcddrstatus = IPATH_KREG_OFFSET(IBCDDRStatus), - .kr_jintreload = IPATH_KREG_OFFSET(JIntReload) -}; - -static const struct ipath_cregs ipath_7220_cregs = { - .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt), - .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt), - .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt), - .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt), - .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt), - .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt), - .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt), - .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt), - .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt), - .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt), - .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt), - .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt), - .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt), - .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt), - .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt), - .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt), - .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt), - .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt), - .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt), - .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt), - .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt), - .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt), - .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt), - .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt), - .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt), - .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt), - .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt), - .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt), - .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt), - .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt), - .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt), - .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt), - .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt), - .cr_vl15droppedpktcnt = IPATH_CREG_OFFSET(RxVL15DroppedPktCnt), - .cr_rxotherlocalphyerrcnt = - IPATH_CREG_OFFSET(RxOtherLocalPhyErrCnt), - .cr_excessbufferovflcnt = IPATH_CREG_OFFSET(ExcessBufferOvflCnt), - .cr_locallinkintegrityerrcnt = - IPATH_CREG_OFFSET(LocalLinkIntegrityErrCnt), - .cr_rxvlerrcnt = IPATH_CREG_OFFSET(RxVlErrCnt), - .cr_rxdlidfltrcnt = IPATH_CREG_OFFSET(RxDlidFltrCnt), - .cr_psstat = IPATH_CREG_OFFSET(PSStat), - .cr_psstart = IPATH_CREG_OFFSET(PSStart), - .cr_psinterval = IPATH_CREG_OFFSET(PSInterval), - .cr_psrcvdatacount = IPATH_CREG_OFFSET(PSRcvDataCount), - .cr_psrcvpktscount = IPATH_CREG_OFFSET(PSRcvPktsCount), - .cr_psxmitdatacount = IPATH_CREG_OFFSET(PSXmitDataCount), - .cr_psxmitpktscount = IPATH_CREG_OFFSET(PSXmitPktsCount), - .cr_psxmitwaitcount = IPATH_CREG_OFFSET(PSXmitWaitCount), -}; - -/* kr_control bits */ -#define INFINIPATH_C_RESET (1U<<7) - -/* kr_intstatus, kr_intclear, kr_intmask bits */ -#define INFINIPATH_I_RCVURG_MASK ((1ULL<<17)-1) -#define INFINIPATH_I_RCVURG_SHIFT 32 -#define INFINIPATH_I_RCVAVAIL_MASK ((1ULL<<17)-1) -#define INFINIPATH_I_RCVAVAIL_SHIFT 0 -#define INFINIPATH_I_SERDESTRIMDONE (1ULL<<27) - -/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */ -#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK 0x00000000000000ffULL -#define INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT 0 -#define INFINIPATH_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL -#define INFINIPATH_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL -#define INFINIPATH_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL -#define INFINIPATH_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL -#define INFINIPATH_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL -#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL -#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL -#define INFINIPATH_HWE_PCIE1PLLFAILED 0x0400000000000000ULL -#define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL -#define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL -/* specific to this chip */ -#define INFINIPATH_HWE_PCIECPLDATAQUEUEERR 0x0000000000000040ULL -#define INFINIPATH_HWE_PCIECPLHDRQUEUEERR 0x0000000000000080ULL -#define INFINIPATH_HWE_SDMAMEMREADERR 0x0000000010000000ULL -#define INFINIPATH_HWE_CLK_UC_PLLNOTLOCKED 0x2000000000000000ULL -#define INFINIPATH_HWE_PCIESERDESQ0PCLKNOTDETECT 0x0100000000000000ULL -#define INFINIPATH_HWE_PCIESERDESQ1PCLKNOTDETECT 0x0200000000000000ULL -#define INFINIPATH_HWE_PCIESERDESQ2PCLKNOTDETECT 0x0400000000000000ULL -#define INFINIPATH_HWE_PCIESERDESQ3PCLKNOTDETECT 0x0800000000000000ULL -#define INFINIPATH_HWE_DDSRXEQMEMORYPARITYERR 0x0000008000000000ULL -#define INFINIPATH_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL -#define INFINIPATH_HWE_PCIE_UC_OCT0MEMORYPARITYERR 0x0000001000000000ULL -#define INFINIPATH_HWE_PCIE_UC_OCT1MEMORYPARITYERR 0x0000002000000000ULL - -#define IBA7220_IBCS_LINKTRAININGSTATE_MASK 0x1F -#define IBA7220_IBCS_LINKSTATE_SHIFT 5 -#define IBA7220_IBCS_LINKSPEED_SHIFT 8 -#define IBA7220_IBCS_LINKWIDTH_SHIFT 9 - -#define IBA7220_IBCC_LINKINITCMD_MASK 0x7ULL -#define IBA7220_IBCC_LINKCMD_SHIFT 19 -#define IBA7220_IBCC_MAXPKTLEN_SHIFT 21 - -/* kr_ibcddrctrl bits */ -#define IBA7220_IBC_DLIDLMC_MASK 0xFFFFFFFFUL -#define IBA7220_IBC_DLIDLMC_SHIFT 32 -#define IBA7220_IBC_HRTBT_MASK 3 -#define IBA7220_IBC_HRTBT_SHIFT 16 -#define IBA7220_IBC_HRTBT_ENB 0x10000UL -#define IBA7220_IBC_LANE_REV_SUPPORTED (1<<8) -#define IBA7220_IBC_LREV_MASK 1 -#define IBA7220_IBC_LREV_SHIFT 8 -#define IBA7220_IBC_RXPOL_MASK 1 -#define IBA7220_IBC_RXPOL_SHIFT 7 -#define IBA7220_IBC_WIDTH_SHIFT 5 -#define IBA7220_IBC_WIDTH_MASK 0x3 -#define IBA7220_IBC_WIDTH_1X_ONLY (0<<IBA7220_IBC_WIDTH_SHIFT) -#define IBA7220_IBC_WIDTH_4X_ONLY (1<<IBA7220_IBC_WIDTH_SHIFT) -#define IBA7220_IBC_WIDTH_AUTONEG (2<<IBA7220_IBC_WIDTH_SHIFT) -#define IBA7220_IBC_SPEED_AUTONEG (1<<1) -#define IBA7220_IBC_SPEED_SDR (1<<2) -#define IBA7220_IBC_SPEED_DDR (1<<3) -#define IBA7220_IBC_SPEED_AUTONEG_MASK (0x7<<1) -#define IBA7220_IBC_IBTA_1_2_MASK (1) - -/* kr_ibcddrstatus */ -/* link latency shift is 0, don't bother defining */ -#define IBA7220_DDRSTAT_LINKLAT_MASK 0x3ffffff - -/* kr_extstatus bits */ -#define INFINIPATH_EXTS_FREQSEL 0x2 -#define INFINIPATH_EXTS_SERDESSEL 0x4 -#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000 -#define INFINIPATH_EXTS_MEMBIST_DISABLED 0x0000000000008000 - -/* kr_xgxsconfig bits */ -#define INFINIPATH_XGXS_RESET 0x5ULL -#define INFINIPATH_XGXS_FC_SAFE (1ULL<<63) - -/* kr_rcvpktledcnt */ -#define IBA7220_LEDBLINK_ON_SHIFT 32 /* 4ns period on after packet */ -#define IBA7220_LEDBLINK_OFF_SHIFT 0 /* 4ns period off before next on */ - -#define _IPATH_GPIO_SDA_NUM 1 -#define _IPATH_GPIO_SCL_NUM 0 - -#define IPATH_GPIO_SDA (1ULL << \ - (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) -#define IPATH_GPIO_SCL (1ULL << \ - (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) - -#define IBA7220_R_INTRAVAIL_SHIFT 17 -#define IBA7220_R_TAILUPD_SHIFT 35 -#define IBA7220_R_PORTCFG_SHIFT 36 - -#define INFINIPATH_JINT_PACKETSHIFT 16 -#define INFINIPATH_JINT_DEFAULT_IDLE_TICKS 0 -#define INFINIPATH_JINT_DEFAULT_MAX_PACKETS 0 - -#define IBA7220_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ - -/* - * the size bits give us 2^N, in KB units. 0 marks as invalid, - * and 7 is reserved. We currently use only 2KB and 4KB - */ -#define IBA7220_TID_SZ_SHIFT 37 /* shift to 3bit size selector */ -#define IBA7220_TID_SZ_2K (1UL<<IBA7220_TID_SZ_SHIFT) /* 2KB */ -#define IBA7220_TID_SZ_4K (2UL<<IBA7220_TID_SZ_SHIFT) /* 4KB */ -#define IBA7220_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ - -#define IPATH_AUTONEG_TRIES 5 /* sequential retries to negotiate DDR */ - -static char int_type[16] = "auto"; -module_param_string(interrupt_type, int_type, sizeof(int_type), 0444); -MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx"); - -/* packet rate matching delay; chip has support */ -static u8 rate_to_delay[2][2] = { - /* 1x, 4x */ - { 8, 2 }, /* SDR */ - { 4, 1 } /* DDR */ -}; - -/* 7220 specific hardware errors... */ -static const struct ipath_hwerror_msgs ipath_7220_hwerror_msgs[] = { - INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"), - INFINIPATH_HWE_MSG(PCIECPLTIMEOUT, "PCIe completion timeout"), - /* - * In practice, it's unlikely wthat we'll see PCIe PLL, or bus - * parity or memory parity error failures, because most likely we - * won't be able to talk to the core of the chip. Nonetheless, we - * might see them, if they are in parts of the PCIe core that aren't - * essential. - */ - INFINIPATH_HWE_MSG(PCIE1PLLFAILED, "PCIePLL1"), - INFINIPATH_HWE_MSG(PCIE0PLLFAILED, "PCIePLL0"), - INFINIPATH_HWE_MSG(PCIEBUSPARITYXTLH, "PCIe XTLH core parity"), - INFINIPATH_HWE_MSG(PCIEBUSPARITYXADM, "PCIe ADM TX core parity"), - INFINIPATH_HWE_MSG(PCIEBUSPARITYRADM, "PCIe ADM RX core parity"), - INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"), - INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"), - INFINIPATH_HWE_MSG(PCIECPLDATAQUEUEERR, "PCIe cpl header queue"), - INFINIPATH_HWE_MSG(PCIECPLHDRQUEUEERR, "PCIe cpl data queue"), - INFINIPATH_HWE_MSG(SDMAMEMREADERR, "Send DMA memory read"), - INFINIPATH_HWE_MSG(CLK_UC_PLLNOTLOCKED, "uC PLL clock not locked"), - INFINIPATH_HWE_MSG(PCIESERDESQ0PCLKNOTDETECT, - "PCIe serdes Q0 no clock"), - INFINIPATH_HWE_MSG(PCIESERDESQ1PCLKNOTDETECT, - "PCIe serdes Q1 no clock"), - INFINIPATH_HWE_MSG(PCIESERDESQ2PCLKNOTDETECT, - "PCIe serdes Q2 no clock"), - INFINIPATH_HWE_MSG(PCIESERDESQ3PCLKNOTDETECT, - "PCIe serdes Q3 no clock"), - INFINIPATH_HWE_MSG(DDSRXEQMEMORYPARITYERR, - "DDS RXEQ memory parity"), - INFINIPATH_HWE_MSG(IB_UC_MEMORYPARITYERR, "IB uC memory parity"), - INFINIPATH_HWE_MSG(PCIE_UC_OCT0MEMORYPARITYERR, - "PCIe uC oct0 memory parity"), - INFINIPATH_HWE_MSG(PCIE_UC_OCT1MEMORYPARITYERR, - "PCIe uC oct1 memory parity"), -}; - -static void autoneg_work(struct work_struct *); - -/* - * the offset is different for different configured port numbers, since - * port0 is fixed in size, but others can vary. Make it a function to - * make the issue more obvious. -*/ -static inline u32 port_egrtid_idx(struct ipath_devdata *dd, unsigned port) -{ - return port ? dd->ipath_p0_rcvegrcnt + - (port-1) * dd->ipath_rcvegrcnt : 0; -} - -static void ipath_7220_txe_recover(struct ipath_devdata *dd) -{ - ++ipath_stats.sps_txeparity; - - dev_info(&dd->pcidev->dev, - "Recovering from TXE PIO parity error\n"); - ipath_disarm_senderrbufs(dd); -} - - -/** - * ipath_7220_handle_hwerrors - display hardware errors. - * @dd: the infinipath device - * @msg: the output buffer - * @msgl: the size of the output buffer - * - * Use same msg buffer as regular errors to avoid excessive stack - * use. Most hardware errors are catastrophic, but for right now, - * we'll print them and continue. We reuse the same message buffer as - * ipath_handle_errors() to avoid excessive stack usage. - */ -static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg, - size_t msgl) -{ - ipath_err_t hwerrs; - u32 bits, ctrl; - int isfatal = 0; - char bitsmsg[64]; - int log_idx; - - hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus); - if (!hwerrs) { - /* - * better than printing cofusing messages - * This seems to be related to clearing the crc error, or - * the pll error during init. - */ - ipath_cdbg(VERBOSE, "Called but no hardware errors set\n"); - goto bail; - } else if (hwerrs == ~0ULL) { - ipath_dev_err(dd, "Read of hardware error status failed " - "(all bits set); ignoring\n"); - goto bail; - } - ipath_stats.sps_hwerrs++; - - /* - * Always clear the error status register, except MEMBISTFAIL, - * regardless of whether we continue or stop using the chip. - * We want that set so we know it failed, even across driver reload. - * We'll still ignore it in the hwerrmask. We do this partly for - * diagnostics, but also for support. - */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, - hwerrs&~INFINIPATH_HWE_MEMBISTFAILED); - - hwerrs &= dd->ipath_hwerrmask; - - /* We log some errors to EEPROM, check if we have any of those. */ - for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx) - if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log) - ipath_inc_eeprom_err(dd, log_idx, 1); - /* - * Make sure we get this much out, unless told to be quiet, - * or it's occurred within the last 5 seconds. - */ - if ((hwerrs & ~(dd->ipath_lasthwerror | - ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | - INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) - << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) || - (ipath_debug & __IPATH_VERBDBG)) - dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx " - "(cleared)\n", (unsigned long long) hwerrs); - dd->ipath_lasthwerror |= hwerrs; - - if (hwerrs & ~dd->ipath_hwe_bitsextant) - ipath_dev_err(dd, "hwerror interrupt with unknown errors " - "%llx set\n", (unsigned long long) - (hwerrs & ~dd->ipath_hwe_bitsextant)); - - if (hwerrs & INFINIPATH_HWE_IB_UC_MEMORYPARITYERR) - ipath_sd7220_clr_ibpar(dd); - - ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control); - if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) { - /* - * Parity errors in send memory are recoverable by h/w - * just do housekeeping, exit freeze mode and continue. - */ - if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | - INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) - << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) { - ipath_7220_txe_recover(dd); - hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | - INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) - << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT); - } - if (hwerrs) { - /* - * If any set that we aren't ignoring only make the - * complaint once, in case it's stuck or recurring, - * and we get here multiple times - * Force link down, so switch knows, and - * LEDs are turned off. - */ - if (dd->ipath_flags & IPATH_INITTED) { - ipath_set_linkstate(dd, IPATH_IB_LINKDOWN); - ipath_setup_7220_setextled(dd, - INFINIPATH_IBCS_L_STATE_DOWN, - INFINIPATH_IBCS_LT_STATE_DISABLED); - ipath_dev_err(dd, "Fatal Hardware Error " - "(freeze mode), no longer" - " usable, SN %.16s\n", - dd->ipath_serial); - isfatal = 1; - } - /* - * Mark as having had an error for driver, and also - * for /sys and status word mapped to user programs. - * This marks unit as not usable, until reset. - */ - *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY; - *dd->ipath_statusp |= IPATH_STATUS_HWERROR; - dd->ipath_flags &= ~IPATH_INITTED; - } else { - ipath_dbg("Clearing freezemode on ignored or " - "recovered hardware error\n"); - ipath_clear_freeze(dd); - } - } - - *msg = '\0'; - - if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) { - strlcat(msg, "[Memory BIST test failed, " - "InfiniPath hardware unusable]", msgl); - /* ignore from now on, so disable until driver reloaded */ - *dd->ipath_statusp |= IPATH_STATUS_HWERROR; - dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED; - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask); - } - - ipath_format_hwerrors(hwerrs, - ipath_7220_hwerror_msgs, - ARRAY_SIZE(ipath_7220_hwerror_msgs), - msg, msgl); - - if (hwerrs & (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK - << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT)) { - bits = (u32) ((hwerrs >> - INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) & - INFINIPATH_HWE_PCIEMEMPARITYERR_MASK); - snprintf(bitsmsg, sizeof bitsmsg, - "[PCIe Mem Parity Errs %x] ", bits); - strlcat(msg, bitsmsg, msgl); - } - -#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \ - INFINIPATH_HWE_COREPLL_RFSLIP) - - if (hwerrs & _IPATH_PLL_FAIL) { - snprintf(bitsmsg, sizeof bitsmsg, - "[PLL failed (%llx), InfiniPath hardware unusable]", - (unsigned long long) hwerrs & _IPATH_PLL_FAIL); - strlcat(msg, bitsmsg, msgl); - /* ignore from now on, so disable until driver reloaded */ - dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask); - } - - if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) { - /* - * If it occurs, it is left masked since the eternal - * interface is unused. - */ - dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED; - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask); - } - - ipath_dev_err(dd, "%s hardware error\n", msg); - /* - * For /sys status file. if no trailing } is copied, we'll - * know it was truncated. - */ - if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg) - snprintf(dd->ipath_freezemsg, dd->ipath_freezelen, - "{%s}", msg); -bail:; -} - -/** - * ipath_7220_boardname - fill in the board name - * @dd: the infinipath device - * @name: the output buffer - * @namelen: the size of the output buffer - * - * info is based on the board revision register - */ -static int ipath_7220_boardname(struct ipath_devdata *dd, char *name, - size_t namelen) -{ - char *n = NULL; - u8 boardrev = dd->ipath_boardrev; - int ret; - - if (boardrev == 15) { - /* - * Emulator sometimes comes up all-ones, rather than zero. - */ - boardrev = 0; - dd->ipath_boardrev = boardrev; - } - switch (boardrev) { - case 0: - n = "InfiniPath_7220_Emulation"; - break; - case 1: - n = "InfiniPath_QLE7240"; - break; - case 2: - n = "InfiniPath_QLE7280"; - break; - case 3: - n = "InfiniPath_QLE7242"; - break; - case 4: - n = "InfiniPath_QEM7240"; - break; - case 5: - n = "InfiniPath_QMI7240"; - break; - case 6: - n = "InfiniPath_QMI7264"; - break; - case 7: - n = "InfiniPath_QMH7240"; - break; - case 8: - n = "InfiniPath_QME7240"; - break; - case 9: - n = "InfiniPath_QLE7250"; - break; - case 10: - n = "InfiniPath_QLE7290"; - break; - case 11: - n = "InfiniPath_QEM7250"; - break; - case 12: - n = "InfiniPath_QLE-Bringup"; - break; - default: - ipath_dev_err(dd, - "Don't yet know about board with ID %u\n", - boardrev); - snprintf(name, namelen, "Unknown_InfiniPath_PCIe_%u", - boardrev); - break; - } - if (n) - snprintf(name, namelen, "%s", n); - - if (dd->ipath_majrev != 5 || !dd->ipath_minrev || - dd->ipath_minrev > 2) { - ipath_dev_err(dd, "Unsupported InfiniPath hardware " - "revision %u.%u!\n", - dd->ipath_majrev, dd->ipath_minrev); - ret = 1; - } else if (dd->ipath_minrev == 1 && - !(dd->ipath_flags & IPATH_INITTED)) { - /* Rev1 chips are prototype. Complain at init, but allow use */ - ipath_dev_err(dd, "Unsupported hardware " - "revision %u.%u, Contact support@qlogic.com\n", - dd->ipath_majrev, dd->ipath_minrev); - ret = 0; - } else - ret = 0; - - /* - * Set here not in ipath_init_*_funcs because we have to do - * it after we can read chip registers. - */ - dd->ipath_ureg_align = 0x10000; /* 64KB alignment */ - - return ret; -} - -/** - * ipath_7220_init_hwerrors - enable hardware errors - * @dd: the infinipath device - * - * now that we have finished initializing everything that might reasonably - * cause a hardware error, and cleared those errors bits as they occur, - * we can enable hardware errors in the mask (potentially enabling - * freeze mode), and enable hardware errors as errors (along with - * everything else) in errormask - */ -static void ipath_7220_init_hwerrors(struct ipath_devdata *dd) -{ - ipath_err_t val; - u64 extsval; - - extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus); - - if (!(extsval & (INFINIPATH_EXTS_MEMBIST_ENDTEST | - INFINIPATH_EXTS_MEMBIST_DISABLED))) - ipath_dev_err(dd, "MemBIST did not complete!\n"); - if (extsval & INFINIPATH_EXTS_MEMBIST_DISABLED) - dev_info(&dd->pcidev->dev, "MemBIST is disabled.\n"); - - val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */ - - if (!dd->ipath_boardrev) /* no PLL for Emulator */ - val &= ~INFINIPATH_HWE_SERDESPLLFAILED; - - if (dd->ipath_minrev == 1) - val &= ~(1ULL << 42); /* TXE LaunchFIFO Parity rev1 issue */ - - val &= ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR; - dd->ipath_hwerrmask = val; - - /* - * special trigger "error" is for debugging purposes. It - * works around a processor/chipset problem. The error - * interrupt allows us to count occurrences, but we don't - * want to pay the overhead for normal use. Emulation only - */ - if (!dd->ipath_boardrev) - dd->ipath_maskederrs = INFINIPATH_E_SENDSPECIALTRIGGER; -} - -/* - * All detailed interaction with the SerDes has been moved to ipath_sd7220.c - * - * The portion of IBA7220-specific bringup_serdes() that actually deals with - * registers and memory within the SerDes itself is ipath_sd7220_init(). - */ - -/** - * ipath_7220_bringup_serdes - bring up the serdes - * @dd: the infinipath device - */ -static int ipath_7220_bringup_serdes(struct ipath_devdata *dd) -{ - int ret = 0; - u64 val, prev_val, guid; - int was_reset; /* Note whether uC was reset */ - - ipath_dbg("Trying to bringup serdes\n"); - - if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) & - INFINIPATH_HWE_SERDESPLLFAILED) { - ipath_dbg("At start, serdes PLL failed bit set " - "in hwerrstatus, clearing and continuing\n"); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, - INFINIPATH_HWE_SERDESPLLFAILED); - } - - dd->ibdeltainprog = 1; - dd->ibsymsnap = - ipath_read_creg32(dd, dd->ipath_cregs->cr_ibsymbolerrcnt); - dd->iblnkerrsnap = - ipath_read_creg32(dd, dd->ipath_cregs->cr_iblinkerrrecovcnt); - - if (!dd->ipath_ibcddrctrl) { - /* not on re-init after reset */ - dd->ipath_ibcddrctrl = - ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcddrctrl); - - if (dd->ipath_link_speed_enabled == - (IPATH_IB_SDR | IPATH_IB_DDR)) - dd->ipath_ibcddrctrl |= - IBA7220_IBC_SPEED_AUTONEG_MASK | - IBA7220_IBC_IBTA_1_2_MASK; - else - dd->ipath_ibcddrctrl |= - dd->ipath_link_speed_enabled == IPATH_IB_DDR - ? IBA7220_IBC_SPEED_DDR : - IBA7220_IBC_SPEED_SDR; - if ((dd->ipath_link_width_enabled & (IB_WIDTH_1X | - IB_WIDTH_4X)) == (IB_WIDTH_1X | IB_WIDTH_4X)) - dd->ipath_ibcddrctrl |= IBA7220_IBC_WIDTH_AUTONEG; - else - dd->ipath_ibcddrctrl |= - dd->ipath_link_width_enabled == IB_WIDTH_4X - ? IBA7220_IBC_WIDTH_4X_ONLY : - IBA7220_IBC_WIDTH_1X_ONLY; - - /* always enable these on driver reload, not sticky */ - dd->ipath_ibcddrctrl |= - IBA7220_IBC_RXPOL_MASK << IBA7220_IBC_RXPOL_SHIFT; - dd->ipath_ibcddrctrl |= - IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT; - /* - * automatic lane reversal detection for receive - * doesn't work correctly in rev 1, so disable it - * on that rev, otherwise enable (disabling not - * sticky across reload for >rev1) - */ - if (dd->ipath_minrev == 1) - dd->ipath_ibcddrctrl &= - ~IBA7220_IBC_LANE_REV_SUPPORTED; - else - dd->ipath_ibcddrctrl |= - IBA7220_IBC_LANE_REV_SUPPORTED; - } - - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl, - dd->ipath_ibcddrctrl); - - ipath_write_kreg(dd, IPATH_KREG_OFFSET(IBNCModeCtrl), 0Ull); - - /* IBA7220 has SERDES MPU reset in D0 of what _was_ IBPLLCfg */ - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl); - /* remember if uC was in Reset or not, for dactrim */ - was_reset = (val & 1); - ipath_cdbg(VERBOSE, "IBReset %s xgxsconfig %llx\n", - was_reset ? "Asserted" : "Negated", (unsigned long long) - ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); - - if (dd->ipath_boardrev) { - /* - * Hardware is not emulator, and may have been reset. Init it. - * Below will release reset, but needs to know if chip was - * originally in reset, to only trim DACs on first time - * after chip reset or powercycle (not driver reload) - */ - ret = ipath_sd7220_init(dd, was_reset); - } - - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); - prev_val = val; - val |= INFINIPATH_XGXS_FC_SAFE; - if (val != prev_val) { - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - } - if (val & INFINIPATH_XGXS_RESET) - val &= ~INFINIPATH_XGXS_RESET; - if (val != prev_val) - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); - - ipath_cdbg(VERBOSE, "done: xgxs=%llx from %llx\n", - (unsigned long long) - ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig), - (unsigned long long) prev_val); - - guid = be64_to_cpu(dd->ipath_guid); - - if (!guid) { - /* have to have something, so use likely unique tsc */ - guid = get_cycles(); - ipath_dbg("No GUID for heartbeat, faking %llx\n", - (unsigned long long)guid); - } else - ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", - (unsigned long long) guid); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hrtbt_guid, guid); - return ret; -} - -static void ipath_7220_config_jint(struct ipath_devdata *dd, - u16 idle_ticks, u16 max_packets) -{ - - /* - * We can request a receive interrupt for 1 or more packets - * from current offset. - */ - if (idle_ticks == 0 || max_packets == 0) - /* interrupt after one packet if no mitigation */ - dd->ipath_rhdrhead_intr_off = - 1ULL << IBA7220_HDRHEAD_PKTINT_SHIFT; - else - /* Turn off RcvHdrHead interrupts if using mitigation */ - dd->ipath_rhdrhead_intr_off = 0ULL; - - /* refresh kernel RcvHdrHead registers... */ - ipath_write_ureg(dd, ur_rcvhdrhead, - dd->ipath_rhdrhead_intr_off | - dd->ipath_pd[0]->port_head, 0); - - dd->ipath_jint_max_packets = max_packets; - dd->ipath_jint_idle_ticks = idle_ticks; - ipath_write_kreg(dd, dd->ipath_kregs->kr_jintreload, - ((u64) max_packets << INFINIPATH_JINT_PACKETSHIFT) | - idle_ticks); -} - -/** - * ipath_7220_quiet_serdes - set serdes to txidle - * @dd: the infinipath device - * Called when driver is being unloaded - */ -static void ipath_7220_quiet_serdes(struct ipath_devdata *dd) -{ - u64 val; - if (dd->ibsymdelta || dd->iblnkerrdelta || - dd->ibdeltainprog) { - u64 diagc; - /* enable counter writes */ - diagc = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwdiagctrl); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl, - diagc | INFINIPATH_DC_COUNTERWREN); - - if (dd->ibsymdelta || dd->ibdeltainprog) { - val = ipath_read_creg32(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt); - if (dd->ibdeltainprog) - val -= val - dd->ibsymsnap; - val -= dd->ibsymdelta; - ipath_write_creg(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt, val); - } - if (dd->iblnkerrdelta || dd->ibdeltainprog) { - val = ipath_read_creg32(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt); - if (dd->ibdeltainprog) - val -= val - dd->iblnkerrsnap; - val -= dd->iblnkerrdelta; - ipath_write_creg(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt, val); - } - - /* and disable counter writes */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl, diagc); - } - - dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG; - wake_up(&dd->ipath_autoneg_wait); - cancel_delayed_work(&dd->ipath_autoneg_work); - flush_scheduled_work(); - ipath_shutdown_relock_poll(dd); - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); - val |= INFINIPATH_XGXS_RESET; - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); -} - -static int ipath_7220_intconfig(struct ipath_devdata *dd) -{ - ipath_7220_config_jint(dd, dd->ipath_jint_idle_ticks, - dd->ipath_jint_max_packets); - return 0; -} - -/** - * ipath_setup_7220_setextled - set the state of the two external LEDs - * @dd: the infinipath device - * @lst: the L state - * @ltst: the LT state - * - * These LEDs indicate the physical and logical state of IB link. - * For this chip (at least with recommended board pinouts), LED1 - * is Yellow (logical state) and LED2 is Green (physical state), - * - * Note: We try to match the Mellanox HCA LED behavior as best - * we can. Green indicates physical link state is OK (something is - * plugged in, and we can train). - * Amber indicates the link is logically up (ACTIVE). - * Mellanox further blinks the amber LED to indicate data packet - * activity, but we have no hardware support for that, so it would - * require waking up every 10-20 msecs and checking the counters - * on the chip, and then turning the LED off if appropriate. That's - * visible overhead, so not something we will do. - * - */ -static void ipath_setup_7220_setextled(struct ipath_devdata *dd, u64 lst, - u64 ltst) -{ - u64 extctl, ledblink = 0; - unsigned long flags = 0; - - /* the diags use the LED to indicate diag info, so we leave - * the external LED alone when the diags are running */ - if (ipath_diag_inuse) - return; - - /* Allow override of LED display for, e.g. Locating system in rack */ - if (dd->ipath_led_override) { - ltst = (dd->ipath_led_override & IPATH_LED_PHYS) - ? INFINIPATH_IBCS_LT_STATE_LINKUP - : INFINIPATH_IBCS_LT_STATE_DISABLED; - lst = (dd->ipath_led_override & IPATH_LED_LOG) - ? INFINIPATH_IBCS_L_STATE_ACTIVE - : INFINIPATH_IBCS_L_STATE_DOWN; - } - - spin_lock_irqsave(&dd->ipath_gpio_lock, flags); - extctl = dd->ipath_extctrl & ~(INFINIPATH_EXTC_LED1PRIPORT_ON | - INFINIPATH_EXTC_LED2PRIPORT_ON); - if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP) { - extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON; - /* - * counts are in chip clock (4ns) periods. - * This is 1/16 sec (66.6ms) on, - * 3/16 sec (187.5 ms) off, with packets rcvd - */ - ledblink = ((66600*1000UL/4) << IBA7220_LEDBLINK_ON_SHIFT) - | ((187500*1000UL/4) << IBA7220_LEDBLINK_OFF_SHIFT); - } - if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE) - extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON; - dd->ipath_extctrl = extctl; - ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl); - spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags); - - if (ledblink) /* blink the LED on packet receive */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvpktledcnt, - ledblink); -} - -/* - * Similar to pci_intx(pdev, 1), except that we make sure - * msi is off... - */ -static void ipath_enable_intx(struct pci_dev *pdev) -{ - u16 cw, new; - int pos; - - /* first, turn on INTx */ - pci_read_config_word(pdev, PCI_COMMAND, &cw); - new = cw & ~PCI_COMMAND_INTX_DISABLE; - if (new != cw) - pci_write_config_word(pdev, PCI_COMMAND, new); - - /* then turn off MSI */ - pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); - if (pos) { - pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &cw); - new = cw & ~PCI_MSI_FLAGS_ENABLE; - if (new != cw) - pci_write_config_word(pdev, pos + PCI_MSI_FLAGS, new); - } -} - -static int ipath_msi_enabled(struct pci_dev *pdev) -{ - int pos, ret = 0; - - pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); - if (pos) { - u16 cw; - - pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &cw); - ret = !!(cw & PCI_MSI_FLAGS_ENABLE); - } - return ret; -} - -/* - * disable msi interrupt if enabled, and clear the flag. - * flag is used primarily for the fallback to INTx, but - * is also used in reinit after reset as a flag. - */ -static void ipath_7220_nomsi(struct ipath_devdata *dd) -{ - dd->ipath_msi_lo = 0; - - if (ipath_msi_enabled(dd->pcidev)) { - /* - * free, but don't zero; later kernels require - * it be freed before disable_msi, so the intx - * setup has to request it again. - */ - if (dd->ipath_irq) - free_irq(dd->ipath_irq, dd); - pci_disable_msi(dd->pcidev); - } -} - -/* - * ipath_setup_7220_cleanup - clean up any per-chip chip-specific stuff - * @dd: the infinipath device - * - * Nothing but msi interrupt cleanup for now. - * - * This is called during driver unload. - */ -static void ipath_setup_7220_cleanup(struct ipath_devdata *dd) -{ - ipath_7220_nomsi(dd); -} - - -static void ipath_7220_pcie_params(struct ipath_devdata *dd, u32 boardrev) -{ - u16 linkstat, minwidth, speed; - int pos; - - pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP); - if (!pos) { - ipath_dev_err(dd, "Can't find PCI Express capability!\n"); - goto bail; - } - - pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA, - &linkstat); - /* - * speed is bits 0-4, linkwidth is bits 4-8 - * no defines for them in headers - */ - speed = linkstat & 0xf; - linkstat >>= 4; - linkstat &= 0x1f; - dd->ipath_lbus_width = linkstat; - switch (boardrev) { - case 0: - case 2: - case 10: - case 12: - minwidth = 16; /* x16 capable boards */ - break; - default: - minwidth = 8; /* x8 capable boards */ - break; - } - - switch (speed) { - case 1: - dd->ipath_lbus_speed = 2500; /* Gen1, 2.5GHz */ - break; - case 2: - dd->ipath_lbus_speed = 5000; /* Gen1, 5GHz */ - break; - default: /* not defined, assume gen1 */ - dd->ipath_lbus_speed = 2500; - break; - } - - if (linkstat < minwidth) - ipath_dev_err(dd, - "PCIe width %u (x%u HCA), performance " - "reduced\n", linkstat, minwidth); - else - ipath_cdbg(VERBOSE, "PCIe speed %u width %u (x%u HCA)\n", - dd->ipath_lbus_speed, linkstat, minwidth); - - if (speed != 1) - ipath_dev_err(dd, - "PCIe linkspeed %u is incorrect; " - "should be 1 (2500)!\n", speed); - -bail: - /* fill in string, even on errors */ - snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info), - "PCIe,%uMHz,x%u\n", - dd->ipath_lbus_speed, - dd->ipath_lbus_width); - return; -} - - -/** - * ipath_setup_7220_config - setup PCIe config related stuff - * @dd: the infinipath device - * @pdev: the PCI device - * - * The pci_enable_msi() call will fail on systems with MSI quirks - * such as those with AMD8131, even if the device of interest is not - * attached to that device, (in the 2.6.13 - 2.6.15 kernels, at least, fixed - * late in 2.6.16). - * All that can be done is to edit the kernel source to remove the quirk - * check until that is fixed. - * We do not need to call enable_msi() for our HyperTransport chip, - * even though it uses MSI, and we want to avoid the quirk warning, so - * So we call enable_msi only for PCIe. If we do end up needing - * pci_enable_msi at some point in the future for HT, we'll move the - * call back into the main init_one code. - * We save the msi lo and hi values, so we can restore them after - * chip reset (the kernel PCI infrastructure doesn't yet handle that - * correctly). - */ -static int ipath_setup_7220_config(struct ipath_devdata *dd, - struct pci_dev *pdev) -{ - int pos, ret = -1; - u32 boardrev; - - dd->ipath_msi_lo = 0; /* used as a flag during reset processing */ - - pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); - if (!strcmp(int_type, "force_msi") || !strcmp(int_type, "auto")) - ret = pci_enable_msi(pdev); - if (ret) { - if (!strcmp(int_type, "force_msi")) { - ipath_dev_err(dd, "pci_enable_msi failed: %d, " - "force_msi is on, so not continuing.\n", - ret); - return ret; - } - - ipath_enable_intx(pdev); - if (!strcmp(int_type, "auto")) - ipath_dev_err(dd, "pci_enable_msi failed: %d, " - "falling back to INTx\n", ret); - } else if (pos) { - u16 control; - pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO, - &dd->ipath_msi_lo); - pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI, - &dd->ipath_msi_hi); - pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, - &control); - /* now save the data (vector) info */ - pci_read_config_word(pdev, - pos + ((control & PCI_MSI_FLAGS_64BIT) - ? PCI_MSI_DATA_64 : - PCI_MSI_DATA_32), - &dd->ipath_msi_data); - } else - ipath_dev_err(dd, "Can't find MSI capability, " - "can't save MSI settings for reset\n"); - - dd->ipath_irq = pdev->irq; - - /* - * We save the cachelinesize also, although it doesn't - * really matter. - */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, - &dd->ipath_pci_cacheline); - - /* - * this function called early, ipath_boardrev not set yet. Can't - * use ipath_read_kreg64() yet, too early in init, so use readq() - */ - boardrev = (readq(&dd->ipath_kregbase[dd->ipath_kregs->kr_revision]) - >> INFINIPATH_R_BOARDID_SHIFT) & INFINIPATH_R_BOARDID_MASK; - - ipath_7220_pcie_params(dd, boardrev); - - dd->ipath_flags |= IPATH_NODMA_RTAIL | IPATH_HAS_SEND_DMA | - IPATH_HAS_PBC_CNT | IPATH_HAS_THRESH_UPDATE; - dd->ipath_pioupd_thresh = 4U; /* set default update threshold */ - return 0; -} - -static void ipath_init_7220_variables(struct ipath_devdata *dd) -{ - /* - * setup the register offsets, since they are different for each - * chip - */ - dd->ipath_kregs = &ipath_7220_kregs; - dd->ipath_cregs = &ipath_7220_cregs; - - /* - * bits for selecting i2c direction and values, - * used for I2C serial flash - */ - dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM; - dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM; - dd->ipath_gpio_sda = IPATH_GPIO_SDA; - dd->ipath_gpio_scl = IPATH_GPIO_SCL; - - /* - * Fill in data for field-values that change in IBA7220. - * We dynamically specify only the mask for LINKTRAININGSTATE - * and only the shift for LINKSTATE, as they are the only ones - * that change. Also precalculate the 3 link states of interest - * and the combined mask. - */ - dd->ibcs_ls_shift = IBA7220_IBCS_LINKSTATE_SHIFT; - dd->ibcs_lts_mask = IBA7220_IBCS_LINKTRAININGSTATE_MASK; - dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK << - dd->ibcs_ls_shift) | dd->ibcs_lts_mask; - dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP << - INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | - (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift); - dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP << - INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | - (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift); - dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP << - INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | - (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift); - - /* - * Fill in data for ibcc field-values that change in IBA7220. - * We dynamically specify only the mask for LINKINITCMD - * and only the shift for LINKCMD and MAXPKTLEN, as they are - * the only ones that change. - */ - dd->ibcc_lic_mask = IBA7220_IBCC_LINKINITCMD_MASK; - dd->ibcc_lc_shift = IBA7220_IBCC_LINKCMD_SHIFT; - dd->ibcc_mpl_shift = IBA7220_IBCC_MAXPKTLEN_SHIFT; - - /* Fill in shifts for RcvCtrl. */ - dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT; - dd->ipath_r_intravail_shift = IBA7220_R_INTRAVAIL_SHIFT; - dd->ipath_r_tailupd_shift = IBA7220_R_TAILUPD_SHIFT; - dd->ipath_r_portcfg_shift = IBA7220_R_PORTCFG_SHIFT; - - /* variables for sanity checking interrupt and errors */ - dd->ipath_hwe_bitsextant = - (INFINIPATH_HWE_RXEMEMPARITYERR_MASK << - INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) | - (INFINIPATH_HWE_TXEMEMPARITYERR_MASK << - INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) | - (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK << - INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) | - INFINIPATH_HWE_PCIE1PLLFAILED | - INFINIPATH_HWE_PCIE0PLLFAILED | - INFINIPATH_HWE_PCIEPOISONEDTLP | - INFINIPATH_HWE_PCIECPLTIMEOUT | - INFINIPATH_HWE_PCIEBUSPARITYXTLH | - INFINIPATH_HWE_PCIEBUSPARITYXADM | - INFINIPATH_HWE_PCIEBUSPARITYRADM | - INFINIPATH_HWE_MEMBISTFAILED | - INFINIPATH_HWE_COREPLL_FBSLIP | - INFINIPATH_HWE_COREPLL_RFSLIP | - INFINIPATH_HWE_SERDESPLLFAILED | - INFINIPATH_HWE_IBCBUSTOSPCPARITYERR | - INFINIPATH_HWE_IBCBUSFRSPCPARITYERR | - INFINIPATH_HWE_PCIECPLDATAQUEUEERR | - INFINIPATH_HWE_PCIECPLHDRQUEUEERR | - INFINIPATH_HWE_SDMAMEMREADERR | - INFINIPATH_HWE_CLK_UC_PLLNOTLOCKED | - INFINIPATH_HWE_PCIESERDESQ0PCLKNOTDETECT | - INFINIPATH_HWE_PCIESERDESQ1PCLKNOTDETECT | - INFINIPATH_HWE_PCIESERDESQ2PCLKNOTDETECT | - INFINIPATH_HWE_PCIESERDESQ3PCLKNOTDETECT | - INFINIPATH_HWE_DDSRXEQMEMORYPARITYERR | - INFINIPATH_HWE_IB_UC_MEMORYPARITYERR | - INFINIPATH_HWE_PCIE_UC_OCT0MEMORYPARITYERR | - INFINIPATH_HWE_PCIE_UC_OCT1MEMORYPARITYERR; - dd->ipath_i_bitsextant = - INFINIPATH_I_SDMAINT | INFINIPATH_I_SDMADISABLED | - (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) | - (INFINIPATH_I_RCVAVAIL_MASK << - INFINIPATH_I_RCVAVAIL_SHIFT) | - INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT | - INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO | - INFINIPATH_I_JINT | INFINIPATH_I_SERDESTRIMDONE; - dd->ipath_e_bitsextant = - INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC | - INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN | - INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN | - INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR | - INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP | - INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION | - INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL | - INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN | - INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK | - INFINIPATH_E_SENDSPECIALTRIGGER | - INFINIPATH_E_SDMADISABLED | INFINIPATH_E_SMINPKTLEN | - INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNDERRUN | - INFINIPATH_E_SPKTLEN | INFINIPATH_E_SDROPPEDSMPPKT | - INFINIPATH_E_SDROPPEDDATAPKT | - INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | - INFINIPATH_E_SUNSUPVL | INFINIPATH_E_SENDBUFMISUSE | - INFINIPATH_E_SDMAGENMISMATCH | INFINIPATH_E_SDMAOUTOFBOUND | - INFINIPATH_E_SDMATAILOUTOFBOUND | INFINIPATH_E_SDMABASE | - INFINIPATH_E_SDMA1STDESC | INFINIPATH_E_SDMARPYTAG | - INFINIPATH_E_SDMADWEN | INFINIPATH_E_SDMAMISSINGDW | - INFINIPATH_E_SDMAUNEXPDATA | - INFINIPATH_E_IBSTATUSCHANGED | INFINIPATH_E_INVALIDADDR | - INFINIPATH_E_RESET | INFINIPATH_E_HARDWARE | - INFINIPATH_E_SDMADESCADDRMISALIGN | - INFINIPATH_E_INVALIDEEPCMD; - - dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK; - dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK; - dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT; - dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT; - dd->ipath_flags |= IPATH_INTREG_64 | IPATH_HAS_MULT_IB_SPEED - | IPATH_HAS_LINK_LATENCY; - - /* - * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity. - * 2 is Some Misc, 3 is reserved for future. - */ - dd->ipath_eep_st_masks[0].hwerrs_to_log = - INFINIPATH_HWE_TXEMEMPARITYERR_MASK << - INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT; - - dd->ipath_eep_st_masks[1].hwerrs_to_log = - INFINIPATH_HWE_RXEMEMPARITYERR_MASK << - INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT; - - dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET; - - ipath_linkrecovery = 0; - - init_waitqueue_head(&dd->ipath_autoneg_wait); - INIT_DELAYED_WORK(&dd->ipath_autoneg_work, autoneg_work); - - dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; - dd->ipath_link_speed_supported = IPATH_IB_SDR | IPATH_IB_DDR; - - dd->ipath_link_width_enabled = dd->ipath_link_width_supported; - dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported; - /* - * set the initial values to reasonable default, will be set - * for real when link is up. - */ - dd->ipath_link_width_active = IB_WIDTH_4X; - dd->ipath_link_speed_active = IPATH_IB_SDR; - dd->delay_mult = rate_to_delay[0][1]; -} - - -/* - * Setup the MSI stuff again after a reset. I'd like to just call - * pci_enable_msi() and request_irq() again, but when I do that, - * the MSI enable bit doesn't get set in the command word, and - * we switch to to a different interrupt vector, which is confusing, - * so I instead just do it all inline. Perhaps somehow can tie this - * into the PCIe hotplug support at some point - * Note, because I'm doing it all here, I don't call pci_disable_msi() - * or free_irq() at the start of ipath_setup_7220_reset(). - */ -static int ipath_reinit_msi(struct ipath_devdata *dd) -{ - int ret = 0; - - int pos; - u16 control; - if (!dd->ipath_msi_lo) /* Using intX, or init problem */ - goto bail; - - pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI); - if (!pos) { - ipath_dev_err(dd, "Can't find MSI capability, " - "can't restore MSI settings\n"); - goto bail; - } - ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n", - dd->ipath_msi_lo, pos + PCI_MSI_ADDRESS_LO); - pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO, - dd->ipath_msi_lo); - ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n", - dd->ipath_msi_hi, pos + PCI_MSI_ADDRESS_HI); - pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI, - dd->ipath_msi_hi); - pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, &control); - if (!(control & PCI_MSI_FLAGS_ENABLE)) { - ipath_cdbg(VERBOSE, "MSI control at off %x was %x, " - "setting MSI enable (%x)\n", pos + PCI_MSI_FLAGS, - control, control | PCI_MSI_FLAGS_ENABLE); - control |= PCI_MSI_FLAGS_ENABLE; - pci_write_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, - control); - } - /* now rewrite the data (vector) info */ - pci_write_config_word(dd->pcidev, pos + - ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8), - dd->ipath_msi_data); - ret = 1; - -bail: - if (!ret) { - ipath_dbg("Using INTx, MSI disabled or not configured\n"); - ipath_enable_intx(dd->pcidev); - ret = 1; - } - /* - * We restore the cachelinesize also, although it doesn't really - * matter. - */ - pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, - dd->ipath_pci_cacheline); - /* and now set the pci master bit again */ - pci_set_master(dd->pcidev); - - return ret; -} - -/* - * This routine sleeps, so it can only be called from user context, not - * from interrupt context. If we need interrupt context, we can split - * it into two routines. - */ -static int ipath_setup_7220_reset(struct ipath_devdata *dd) -{ - u64 val; - int i; - int ret; - u16 cmdval; - - pci_read_config_word(dd->pcidev, PCI_COMMAND, &cmdval); - - /* Use dev_err so it shows up in logs, etc. */ - ipath_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->ipath_unit); - - /* keep chip from being accessed in a few places */ - dd->ipath_flags &= ~(IPATH_INITTED | IPATH_PRESENT); - val = dd->ipath_control | INFINIPATH_C_RESET; - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val); - mb(); - - for (i = 1; i <= 5; i++) { - int r; - - /* - * Allow MBIST, etc. to complete; longer on each retry. - * We sometimes get machine checks from bus timeout if no - * response, so for now, make it *really* long. - */ - msleep(1000 + (1 + i) * 2000); - r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, - dd->ipath_pcibar0); - if (r) - ipath_dev_err(dd, "rewrite of BAR0 failed: %d\n", r); - r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, - dd->ipath_pcibar1); - if (r) - ipath_dev_err(dd, "rewrite of BAR1 failed: %d\n", r); - /* now re-enable memory access */ - pci_write_config_word(dd->pcidev, PCI_COMMAND, cmdval); - r = pci_enable_device(dd->pcidev); - if (r) - ipath_dev_err(dd, "pci_enable_device failed after " - "reset: %d\n", r); - /* - * whether it fully enabled or not, mark as present, - * again (but not INITTED) - */ - dd->ipath_flags |= IPATH_PRESENT; - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision); - if (val == dd->ipath_revision) { - ipath_cdbg(VERBOSE, "Got matching revision " - "register %llx on try %d\n", - (unsigned long long) val, i); - ret = ipath_reinit_msi(dd); - goto bail; - } - /* Probably getting -1 back */ - ipath_dbg("Didn't get expected revision register, " - "got %llx, try %d\n", (unsigned long long) val, - i + 1); - } - ret = 0; /* failed */ - -bail: - if (ret) - ipath_7220_pcie_params(dd, dd->ipath_boardrev); - - return ret; -} - -/** - * ipath_7220_put_tid - write a TID to the chip - * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to update - * @tidtype: 0 for eager, 1 for expected - * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing - * - * This exists as a separate routine to allow for selection of the - * appropriate "flavor". The static calls in cleanup just use the - * revision-agnostic form, as they are not performance critical. - */ -static void ipath_7220_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr, - u32 type, unsigned long pa) -{ - if (pa != dd->ipath_tidinvalid) { - u64 chippa = pa >> IBA7220_TID_PA_SHIFT; - - /* paranoia checks */ - if (pa != (chippa << IBA7220_TID_PA_SHIFT)) { - dev_info(&dd->pcidev->dev, "BUG: physaddr %lx " - "not 2KB aligned!\n", pa); - return; - } - if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) { - ipath_dev_err(dd, - "BUG: Physical page address 0x%lx " - "larger than supported\n", pa); - return; - } - - if (type == RCVHQ_RCV_TYPE_EAGER) - chippa |= dd->ipath_tidtemplate; - else /* for now, always full 4KB page */ - chippa |= IBA7220_TID_SZ_4K; - writeq(chippa, tidptr); - } else - writeq(pa, tidptr); - mmiowb(); -} - -/** - * ipath_7220_clear_tid - clear all TID entries for a port, expected and eager - * @dd: the infinipath device - * @port: the port - * - * clear all TID entries for a port, expected and eager. - * Used from ipath_close(). On this chip, TIDs are only 32 bits, - * not 64, but they are still on 64 bit boundaries, so tidbase - * is declared as u64 * for the pointer math, even though we write 32 bits - */ -static void ipath_7220_clear_tids(struct ipath_devdata *dd, unsigned port) -{ - u64 __iomem *tidbase; - unsigned long tidinv; - int i; - - if (!dd->ipath_kregbase) - return; - - ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port); - - tidinv = dd->ipath_tidinvalid; - tidbase = (u64 __iomem *) - ((char __iomem *)(dd->ipath_kregbase) + - dd->ipath_rcvtidbase + - port * dd->ipath_rcvtidcnt * sizeof(*tidbase)); - - for (i = 0; i < dd->ipath_rcvtidcnt; i++) - ipath_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, - tidinv); - - tidbase = (u64 __iomem *) - ((char __iomem *)(dd->ipath_kregbase) + - dd->ipath_rcvegrbase + port_egrtid_idx(dd, port) - * sizeof(*tidbase)); - - for (i = port ? dd->ipath_rcvegrcnt : dd->ipath_p0_rcvegrcnt; i; i--) - ipath_7220_put_tid(dd, &tidbase[i-1], RCVHQ_RCV_TYPE_EAGER, - tidinv); -} - -/** - * ipath_7220_tidtemplate - setup constants for TID updates - * @dd: the infinipath device - * - * We setup stuff that we use a lot, to avoid calculating each time - */ -static void ipath_7220_tidtemplate(struct ipath_devdata *dd) -{ - /* For now, we always allocate 4KB buffers (at init) so we can - * receive max size packets. We may want a module parameter to - * specify 2KB or 4KB and/or make be per port instead of per device - * for those who want to reduce memory footprint. Note that the - * ipath_rcvhdrentsize size must be large enough to hold the largest - * IB header (currently 96 bytes) that we expect to handle (plus of - * course the 2 dwords of RHF). - */ - if (dd->ipath_rcvegrbufsize == 2048) - dd->ipath_tidtemplate = IBA7220_TID_SZ_2K; - else if (dd->ipath_rcvegrbufsize == 4096) - dd->ipath_tidtemplate = IBA7220_TID_SZ_4K; - else { - dev_info(&dd->pcidev->dev, "BUG: unsupported egrbufsize " - "%u, using %u\n", dd->ipath_rcvegrbufsize, - 4096); - dd->ipath_tidtemplate = IBA7220_TID_SZ_4K; - } - dd->ipath_tidinvalid = 0; -} - -static int ipath_7220_early_init(struct ipath_devdata *dd) -{ - u32 i, s; - - if (strcmp(int_type, "auto") && - strcmp(int_type, "force_msi") && - strcmp(int_type, "force_intx")) { - ipath_dev_err(dd, "Invalid interrupt_type: '%s', expecting " - "auto, force_msi or force_intx\n", int_type); - return -EINVAL; - } - - /* - * Control[4] has been added to change the arbitration within - * the SDMA engine between favoring data fetches over descriptor - * fetches. ipath_sdma_fetch_arb==0 gives data fetches priority. - */ - if (ipath_sdma_fetch_arb && (dd->ipath_minrev > 1)) - dd->ipath_control |= 1<<4; - - dd->ipath_flags |= IPATH_4BYTE_TID; - - /* - * For openfabrics, we need to be able to handle an IB header of - * 24 dwords. HT chip has arbitrary sized receive buffers, so we - * made them the same size as the PIO buffers. This chip does not - * handle arbitrary size buffers, so we need the header large enough - * to handle largest IB header, but still have room for a 2KB MTU - * standard IB packet. - */ - dd->ipath_rcvhdrentsize = 24; - dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE; - dd->ipath_rhf_offset = - dd->ipath_rcvhdrentsize - sizeof(u64) / sizeof(u32); - - dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048; - /* - * the min() check here is currently a nop, but it may not always - * be, depending on just how we do ipath_rcvegrbufsize - */ - dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k : - dd->ipath_piosize2k, - dd->ipath_rcvegrbufsize + - (dd->ipath_rcvhdrentsize << 2)); - dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen; - - ipath_7220_config_jint(dd, INFINIPATH_JINT_DEFAULT_IDLE_TICKS, - INFINIPATH_JINT_DEFAULT_MAX_PACKETS); - - if (dd->ipath_boardrev) /* no eeprom on emulator */ - ipath_get_eeprom_info(dd); - - /* start of code to check and print procmon */ - s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon)); - s &= ~(1U<<31); /* clear done bit */ - s |= 1U<<14; /* clear counter (write 1 to clear) */ - ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s); - /* make sure clear_counter low long enough before start */ - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - - s &= ~(1U<<14); /* allow counter to count (before starting) */ - ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon)); - - s |= 1U<<15; /* start the counter */ - s &= ~(1U<<31); /* clear done bit */ - s &= ~0x7ffU; /* clear frequency bits */ - s |= 0xe29; /* set frequency bits, in case cleared */ - ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s); - - s = 0; - for (i = 500; i > 0 && !(s&(1ULL<<31)); i--) { - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon)); - } - if (!(s&(1U<<31))) - ipath_dev_err(dd, "ProcMon register not valid: 0x%x\n", s); - else - ipath_dbg("ProcMon=0x%x, count=0x%x\n", s, (s>>16)&0x1ff); - - return 0; -} - -/** - * ipath_init_7220_get_base_info - set chip-specific flags for user code - * @pd: the infinipath port - * @kbase: ipath_base_info pointer - * - * We set the PCIE flag because the lower bandwidth on PCIe vs - * HyperTransport can affect some user packet algorithims. - */ -static int ipath_7220_get_base_info(struct ipath_portdata *pd, void *kbase) -{ - struct ipath_base_info *kinfo = kbase; - - kinfo->spi_runtime_flags |= - IPATH_RUNTIME_PCIE | IPATH_RUNTIME_NODMA_RTAIL | - IPATH_RUNTIME_SDMA; - - return 0; -} - -static void ipath_7220_free_irq(struct ipath_devdata *dd) -{ - free_irq(dd->ipath_irq, dd); - dd->ipath_irq = 0; -} - -static struct ipath_message_header * -ipath_7220_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr) -{ - u32 offset = ipath_hdrget_offset(rhf_addr); - - return (struct ipath_message_header *) - (rhf_addr - dd->ipath_rhf_offset + offset); -} - -static void ipath_7220_config_ports(struct ipath_devdata *dd, ushort cfgports) -{ - u32 nchipports; - - nchipports = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); - if (!cfgports) { - int ncpus = num_online_cpus(); - - if (ncpus <= 4) - dd->ipath_portcnt = 5; - else if (ncpus <= 8) - dd->ipath_portcnt = 9; - if (dd->ipath_portcnt) - ipath_dbg("Auto-configured for %u ports, %d cpus " - "online\n", dd->ipath_portcnt, ncpus); - } else if (cfgports <= nchipports) - dd->ipath_portcnt = cfgports; - if (!dd->ipath_portcnt) /* none of the above, set to max */ - dd->ipath_portcnt = nchipports; - /* - * chip can be configured for 5, 9, or 17 ports, and choice - * affects number of eager TIDs per port (1K, 2K, 4K). - */ - if (dd->ipath_portcnt > 9) - dd->ipath_rcvctrl |= 2ULL << IBA7220_R_PORTCFG_SHIFT; - else if (dd->ipath_portcnt > 5) - dd->ipath_rcvctrl |= 1ULL << IBA7220_R_PORTCFG_SHIFT; - /* else configure for default 5 receive ports */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, - dd->ipath_rcvctrl); - dd->ipath_p0_rcvegrcnt = 2048; /* always */ - if (dd->ipath_flags & IPATH_HAS_SEND_DMA) - dd->ipath_pioreserved = 3; /* kpiobufs used for PIO */ -} - - -static int ipath_7220_get_ib_cfg(struct ipath_devdata *dd, int which) -{ - int lsb, ret = 0; - u64 maskr; /* right-justified mask */ - - switch (which) { - case IPATH_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ - lsb = IBA7220_IBC_HRTBT_SHIFT; - maskr = IBA7220_IBC_HRTBT_MASK; - break; - - case IPATH_IB_CFG_LWID_ENB: /* Get allowed Link-width */ - ret = dd->ipath_link_width_enabled; - goto done; - - case IPATH_IB_CFG_LWID: /* Get currently active Link-width */ - ret = dd->ipath_link_width_active; - goto done; - - case IPATH_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ - ret = dd->ipath_link_speed_enabled; - goto done; - - case IPATH_IB_CFG_SPD: /* Get current Link spd */ - ret = dd->ipath_link_speed_active; - goto done; - - case IPATH_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ - lsb = IBA7220_IBC_RXPOL_SHIFT; - maskr = IBA7220_IBC_RXPOL_MASK; - break; - - case IPATH_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ - lsb = IBA7220_IBC_LREV_SHIFT; - maskr = IBA7220_IBC_LREV_MASK; - break; - - case IPATH_IB_CFG_LINKLATENCY: - ret = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcddrstatus) - & IBA7220_DDRSTAT_LINKLAT_MASK; - goto done; - - default: - ret = -ENOTSUPP; - goto done; - } - ret = (int)((dd->ipath_ibcddrctrl >> lsb) & maskr); -done: - return ret; -} - -static int ipath_7220_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val) -{ - int lsb, ret = 0, setforce = 0; - u64 maskr; /* right-justified mask */ - - switch (which) { - case IPATH_IB_CFG_LIDLMC: - /* - * Set LID and LMC. Combined to avoid possible hazard - * caller puts LMC in 16MSbits, DLID in 16LSbits of val - */ - lsb = IBA7220_IBC_DLIDLMC_SHIFT; - maskr = IBA7220_IBC_DLIDLMC_MASK; - break; - - case IPATH_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ - if (val & IPATH_IB_HRTBT_ON && - (dd->ipath_flags & IPATH_NO_HRTBT)) - goto bail; - lsb = IBA7220_IBC_HRTBT_SHIFT; - maskr = IBA7220_IBC_HRTBT_MASK; - break; - - case IPATH_IB_CFG_LWID_ENB: /* set allowed Link-width */ - /* - * As with speed, only write the actual register if - * the link is currently down, otherwise takes effect - * on next link change. - */ - dd->ipath_link_width_enabled = val; - if ((dd->ipath_flags & (IPATH_LINKDOWN|IPATH_LINKINIT)) != - IPATH_LINKDOWN) - goto bail; - /* - * We set the IPATH_IB_FORCE_NOTIFY bit so updown - * will get called because we want update - * link_width_active, and the change may not take - * effect for some time (if we are in POLL), so this - * flag will force the updown routine to be called - * on the next ibstatuschange down interrupt, even - * if it's not an down->up transition. - */ - val--; /* convert from IB to chip */ - maskr = IBA7220_IBC_WIDTH_MASK; - lsb = IBA7220_IBC_WIDTH_SHIFT; - setforce = 1; - dd->ipath_flags |= IPATH_IB_FORCE_NOTIFY; - break; - - case IPATH_IB_CFG_SPD_ENB: /* set allowed Link speeds */ - /* - * If we turn off IB1.2, need to preset SerDes defaults, - * but not right now. Set a flag for the next time - * we command the link down. As with width, only write the - * actual register if the link is currently down, otherwise - * takes effect on next link change. Since setting is being - * explictly requested (via MAD or sysfs), clear autoneg - * failure status if speed autoneg is enabled. - */ - dd->ipath_link_speed_enabled = val; - if (dd->ipath_ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK && - !(val & (val - 1))) - dd->ipath_presets_needed = 1; - if ((dd->ipath_flags & (IPATH_LINKDOWN|IPATH_LINKINIT)) != - IPATH_LINKDOWN) - goto bail; - /* - * We set the IPATH_IB_FORCE_NOTIFY bit so updown - * will get called because we want update - * link_speed_active, and the change may not take - * effect for some time (if we are in POLL), so this - * flag will force the updown routine to be called - * on the next ibstatuschange down interrupt, even - * if it's not an down->up transition. When setting - * speed autoneg, clear AUTONEG_FAILED. - */ - if (val == (IPATH_IB_SDR | IPATH_IB_DDR)) { - val = IBA7220_IBC_SPEED_AUTONEG_MASK | - IBA7220_IBC_IBTA_1_2_MASK; - dd->ipath_flags &= ~IPATH_IB_AUTONEG_FAILED; - } else - val = val == IPATH_IB_DDR ? IBA7220_IBC_SPEED_DDR - : IBA7220_IBC_SPEED_SDR; - maskr = IBA7220_IBC_SPEED_AUTONEG_MASK | - IBA7220_IBC_IBTA_1_2_MASK; - lsb = 0; /* speed bits are low bits */ - setforce = 1; - break; - - case IPATH_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ - lsb = IBA7220_IBC_RXPOL_SHIFT; - maskr = IBA7220_IBC_RXPOL_MASK; - break; - - case IPATH_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ - lsb = IBA7220_IBC_LREV_SHIFT; - maskr = IBA7220_IBC_LREV_MASK; - break; - - default: - ret = -ENOTSUPP; - goto bail; - } - dd->ipath_ibcddrctrl &= ~(maskr << lsb); - dd->ipath_ibcddrctrl |= (((u64) val & maskr) << lsb); - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl, - dd->ipath_ibcddrctrl); - if (setforce) - dd->ipath_flags |= IPATH_IB_FORCE_NOTIFY; -bail: - return ret; -} - -static void ipath_7220_read_counters(struct ipath_devdata *dd, - struct infinipath_counters *cntrs) -{ - u64 *counters = (u64 *) cntrs; - int i; - - for (i = 0; i < sizeof(*cntrs) / sizeof(u64); i++) - counters[i] = ipath_snap_cntr(dd, i); -} - -/* if we are using MSI, try to fallback to INTx */ -static int ipath_7220_intr_fallback(struct ipath_devdata *dd) -{ - if (dd->ipath_msi_lo) { - dev_info(&dd->pcidev->dev, "MSI interrupt not detected," - " trying INTx interrupts\n"); - ipath_7220_nomsi(dd); - ipath_enable_intx(dd->pcidev); - /* - * some newer kernels require free_irq before disable_msi, - * and irq can be changed during disable and intx enable - * and we need to therefore use the pcidev->irq value, - * not our saved MSI value. - */ - dd->ipath_irq = dd->pcidev->irq; - if (request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED, - IPATH_DRV_NAME, dd)) - ipath_dev_err(dd, - "Could not re-request_irq for INTx\n"); - return 1; - } - return 0; -} - -/* - * reset the XGXS (between serdes and IBC). Slightly less intrusive - * than resetting the IBC or external link state, and useful in some - * cases to cause some retraining. To do this right, we reset IBC - * as well. - */ -static void ipath_7220_xgxs_reset(struct ipath_devdata *dd) -{ - u64 val, prev_val; - - prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); - val = prev_val | INFINIPATH_XGXS_RESET; - prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, - dd->ipath_control & ~INFINIPATH_C_LINKENABLE); - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val); - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, - dd->ipath_control); -} - - -/* Still needs cleanup, too much hardwired stuff */ -static void autoneg_send(struct ipath_devdata *dd, - u32 *hdr, u32 dcnt, u32 *data) -{ - int i; - u64 cnt; - u32 __iomem *piobuf; - u32 pnum; - - i = 0; - cnt = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ - while (!(piobuf = ipath_getpiobuf(dd, cnt, &pnum))) { - if (i++ > 15) { - ipath_dbg("Couldn't get pio buffer for send\n"); - return; - } - udelay(2); - } - if (dd->ipath_flags&IPATH_HAS_PBC_CNT) - cnt |= 0x80000000UL<<32; /* mark as VL15 */ - writeq(cnt, piobuf); - ipath_flush_wc(); - __iowrite32_copy(piobuf + 2, hdr, 7); - __iowrite32_copy(piobuf + 9, data, dcnt); - ipath_flush_wc(); -} - -/* - * _start packet gets sent twice at start, _done gets sent twice at end - */ -static void ipath_autoneg_send(struct ipath_devdata *dd, int which) -{ - static u32 swapped; - u32 dw, i, hcnt, dcnt, *data; - static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; - static u32 madpayload_start[0x40] = { - 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, - 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, - 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ - }; - static u32 madpayload_done[0x40] = { - 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, - 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, - 0x40000001, 0x1388, 0x15e, /* rest 0's */ - }; - dcnt = ARRAY_SIZE(madpayload_start); - hcnt = ARRAY_SIZE(hdr); - if (!swapped) { - /* for maintainability, do it at runtime */ - for (i = 0; i < hcnt; i++) { - dw = (__force u32) cpu_to_be32(hdr[i]); - hdr[i] = dw; - } - for (i = 0; i < dcnt; i++) { - dw = (__force u32) cpu_to_be32(madpayload_start[i]); - madpayload_start[i] = dw; - dw = (__force u32) cpu_to_be32(madpayload_done[i]); - madpayload_done[i] = dw; - } - swapped = 1; - } - - data = which ? madpayload_done : madpayload_start; - ipath_cdbg(PKT, "Sending %s special MADs\n", which?"done":"start"); - - autoneg_send(dd, hdr, dcnt, data); - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - udelay(2); - autoneg_send(dd, hdr, dcnt, data); - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - udelay(2); -} - - - -/* - * Do the absolute minimum to cause an IB speed change, and make it - * ready, but don't actually trigger the change. The caller will - * do that when ready (if link is in Polling training state, it will - * happen immediately, otherwise when link next goes down) - * - * This routine should only be used as part of the DDR autonegotation - * code for devices that are not compliant with IB 1.2 (or code that - * fixes things up for same). - * - * When link has gone down, and autoneg enabled, or autoneg has - * failed and we give up until next time we set both speeds, and - * then we want IBTA enabled as well as "use max enabled speed. - */ -static void set_speed_fast(struct ipath_devdata *dd, u32 speed) -{ - dd->ipath_ibcddrctrl &= ~(IBA7220_IBC_SPEED_AUTONEG_MASK | - IBA7220_IBC_IBTA_1_2_MASK | - (IBA7220_IBC_WIDTH_MASK << IBA7220_IBC_WIDTH_SHIFT)); - - if (speed == (IPATH_IB_SDR | IPATH_IB_DDR)) - dd->ipath_ibcddrctrl |= IBA7220_IBC_SPEED_AUTONEG_MASK | - IBA7220_IBC_IBTA_1_2_MASK; - else - dd->ipath_ibcddrctrl |= speed == IPATH_IB_DDR ? - IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR; - - /* - * Convert from IB-style 1 = 1x, 2 = 4x, 3 = auto - * to chip-centric 0 = 1x, 1 = 4x, 2 = auto - */ - dd->ipath_ibcddrctrl |= (u64)(dd->ipath_link_width_enabled - 1) << - IBA7220_IBC_WIDTH_SHIFT; - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl, - dd->ipath_ibcddrctrl); - ipath_cdbg(VERBOSE, "setup for IB speed (%x) done\n", speed); -} - - -/* - * this routine is only used when we are not talking to another - * IB 1.2-compliant device that we think can do DDR. - * (This includes all existing switch chips as of Oct 2007.) - * 1.2-compliant devices go directly to DDR prior to reaching INIT - */ -static void try_auto_neg(struct ipath_devdata *dd) -{ - /* - * required for older non-IB1.2 DDR switches. Newer - * non-IB-compliant switches don't need it, but so far, - * aren't bothered by it either. "Magic constant" - */ - ipath_write_kreg(dd, IPATH_KREG_OFFSET(IBNCModeCtrl), - 0x3b9dc07); - dd->ipath_flags |= IPATH_IB_AUTONEG_INPROG; - ipath_autoneg_send(dd, 0); - set_speed_fast(dd, IPATH_IB_DDR); - ipath_toggle_rclkrls(dd); - /* 2 msec is minimum length of a poll cycle */ - schedule_delayed_work(&dd->ipath_autoneg_work, - msecs_to_jiffies(2)); -} - - -static int ipath_7220_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs) -{ - int ret = 0, symadj = 0; - u32 ltstate = ipath_ib_linkstate(dd, ibcs); - - dd->ipath_link_width_active = - ((ibcs >> IBA7220_IBCS_LINKWIDTH_SHIFT) & 1) ? - IB_WIDTH_4X : IB_WIDTH_1X; - dd->ipath_link_speed_active = - ((ibcs >> IBA7220_IBCS_LINKSPEED_SHIFT) & 1) ? - IPATH_IB_DDR : IPATH_IB_SDR; - - if (!ibup) { - /* - * when link goes down we don't want aeq running, so it - * won't't interfere with IBC training, etc., and we need - * to go back to the static SerDes preset values - */ - if (dd->ipath_x1_fix_tries && - ltstate <= INFINIPATH_IBCS_LT_STATE_SLEEPQUIET && - ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) - dd->ipath_x1_fix_tries = 0; - if (!(dd->ipath_flags & (IPATH_IB_AUTONEG_FAILED | - IPATH_IB_AUTONEG_INPROG))) - set_speed_fast(dd, dd->ipath_link_speed_enabled); - if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)) { - ipath_cdbg(VERBOSE, "Setting RXEQ defaults\n"); - ipath_sd7220_presets(dd); - } - /* this might better in ipath_sd7220_presets() */ - ipath_set_relock_poll(dd, ibup); - } else { - if (ipath_compat_ddr_negotiate && - !(dd->ipath_flags & (IPATH_IB_AUTONEG_FAILED | - IPATH_IB_AUTONEG_INPROG)) && - dd->ipath_link_speed_active == IPATH_IB_SDR && - (dd->ipath_link_speed_enabled & - (IPATH_IB_DDR | IPATH_IB_SDR)) == - (IPATH_IB_DDR | IPATH_IB_SDR) && - dd->ipath_autoneg_tries < IPATH_AUTONEG_TRIES) { - /* we are SDR, and DDR auto-negotiation enabled */ - ++dd->ipath_autoneg_tries; - ipath_dbg("DDR negotiation try, %u/%u\n", - dd->ipath_autoneg_tries, - IPATH_AUTONEG_TRIES); - if (!dd->ibdeltainprog) { - dd->ibdeltainprog = 1; - dd->ibsymsnap = ipath_read_creg32(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt); - dd->iblnkerrsnap = ipath_read_creg32(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt); - } - try_auto_neg(dd); - ret = 1; /* no other IB status change processing */ - } else if ((dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) - && dd->ipath_link_speed_active == IPATH_IB_SDR) { - ipath_autoneg_send(dd, 1); - set_speed_fast(dd, IPATH_IB_DDR); - udelay(2); - ipath_toggle_rclkrls(dd); - ret = 1; /* no other IB status change processing */ - } else { - if ((dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) && - (dd->ipath_link_speed_active & IPATH_IB_DDR)) { - ipath_dbg("Got to INIT with DDR autoneg\n"); - dd->ipath_flags &= ~(IPATH_IB_AUTONEG_INPROG - | IPATH_IB_AUTONEG_FAILED); - dd->ipath_autoneg_tries = 0; - /* re-enable SDR, for next link down */ - set_speed_fast(dd, - dd->ipath_link_speed_enabled); - wake_up(&dd->ipath_autoneg_wait); - symadj = 1; - } else if (dd->ipath_flags & IPATH_IB_AUTONEG_FAILED) { - /* - * clear autoneg failure flag, and do setup - * so we'll try next time link goes down and - * back to INIT (possibly connected to different - * device). - */ - ipath_dbg("INIT %sDR after autoneg failure\n", - (dd->ipath_link_speed_active & - IPATH_IB_DDR) ? "D" : "S"); - dd->ipath_flags &= ~IPATH_IB_AUTONEG_FAILED; - dd->ipath_ibcddrctrl |= - IBA7220_IBC_IBTA_1_2_MASK; - ipath_write_kreg(dd, - IPATH_KREG_OFFSET(IBNCModeCtrl), 0); - symadj = 1; - } - } - /* - * if we are in 1X on rev1 only, and are in autoneg width, - * it could be due to an xgxs problem, so if we haven't - * already tried, try twice to get to 4X; if we - * tried, and couldn't, report it, since it will - * probably not be what is desired. - */ - if (dd->ipath_minrev == 1 && - (dd->ipath_link_width_enabled & (IB_WIDTH_1X | - IB_WIDTH_4X)) == (IB_WIDTH_1X | IB_WIDTH_4X) - && dd->ipath_link_width_active == IB_WIDTH_1X - && dd->ipath_x1_fix_tries < 3) { - if (++dd->ipath_x1_fix_tries == 3) { - dev_info(&dd->pcidev->dev, - "IB link is in 1X mode\n"); - if (!(dd->ipath_flags & - IPATH_IB_AUTONEG_INPROG)) - symadj = 1; - } - else { - ipath_cdbg(VERBOSE, "IB 1X in " - "auto-width, try %u to be " - "sure it's really 1X; " - "ltstate %u\n", - dd->ipath_x1_fix_tries, - ltstate); - dd->ipath_f_xgxs_reset(dd); - ret = 1; /* skip other processing */ - } - } else if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)) - symadj = 1; - - if (!ret) { - dd->delay_mult = rate_to_delay - [(ibcs >> IBA7220_IBCS_LINKSPEED_SHIFT) & 1] - [(ibcs >> IBA7220_IBCS_LINKWIDTH_SHIFT) & 1]; - - ipath_set_relock_poll(dd, ibup); - } - } - - if (symadj) { - if (dd->ibdeltainprog) { - dd->ibdeltainprog = 0; - dd->ibsymdelta += ipath_read_creg32(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt) - - dd->ibsymsnap; - dd->iblnkerrdelta += ipath_read_creg32(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt) - - dd->iblnkerrsnap; - } - } else if (!ibup && !dd->ibdeltainprog - && !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)) { - dd->ibdeltainprog = 1; - dd->ibsymsnap = ipath_read_creg32(dd, - dd->ipath_cregs->cr_ibsymbolerrcnt); - dd->iblnkerrsnap = ipath_read_creg32(dd, - dd->ipath_cregs->cr_iblinkerrrecovcnt); - } - - if (!ret) - ipath_setup_7220_setextled(dd, ipath_ib_linkstate(dd, ibcs), - ltstate); - return ret; -} - - -/* - * Handle the empirically determined mechanism for auto-negotiation - * of DDR speed with switches. - */ -static void autoneg_work(struct work_struct *work) -{ - struct ipath_devdata *dd; - u64 startms; - u32 lastlts, i; - - dd = container_of(work, struct ipath_devdata, - ipath_autoneg_work.work); - - startms = jiffies_to_msecs(jiffies); - - /* - * busy wait for this first part, it should be at most a - * few hundred usec, since we scheduled ourselves for 2msec. - */ - for (i = 0; i < 25; i++) { - lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat); - if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) { - ipath_set_linkstate(dd, IPATH_IB_LINKDOWN_DISABLE); - break; - } - udelay(100); - } - - if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)) - goto done; /* we got there early or told to stop */ - - /* we expect this to timeout */ - if (wait_event_timeout(dd->ipath_autoneg_wait, - !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG), - msecs_to_jiffies(90))) - goto done; - - ipath_toggle_rclkrls(dd); - - /* we expect this to timeout */ - if (wait_event_timeout(dd->ipath_autoneg_wait, - !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG), - msecs_to_jiffies(1700))) - goto done; - - set_speed_fast(dd, IPATH_IB_SDR); - ipath_toggle_rclkrls(dd); - - /* - * wait up to 250 msec for link to train and get to INIT at DDR; - * this should terminate early - */ - wait_event_timeout(dd->ipath_autoneg_wait, - !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG), - msecs_to_jiffies(250)); -done: - if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) { - ipath_dbg("Did not get to DDR INIT (%x) after %Lu msecs\n", - ipath_ib_state(dd, dd->ipath_lastibcstat), - (unsigned long long) jiffies_to_msecs(jiffies)-startms); - dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG; - if (dd->ipath_autoneg_tries == IPATH_AUTONEG_TRIES) { - dd->ipath_flags |= IPATH_IB_AUTONEG_FAILED; - ipath_dbg("Giving up on DDR until next IB " - "link Down\n"); - dd->ipath_autoneg_tries = 0; - } - set_speed_fast(dd, dd->ipath_link_speed_enabled); - } -} - - -/** - * ipath_init_iba7220_funcs - set up the chip-specific function pointers - * @dd: the infinipath device - * - * This is global, and is called directly at init to set up the - * chip-specific function pointers for later use. - */ -void ipath_init_iba7220_funcs(struct ipath_devdata *dd) -{ - dd->ipath_f_intrsetup = ipath_7220_intconfig; - dd->ipath_f_bus = ipath_setup_7220_config; - dd->ipath_f_reset = ipath_setup_7220_reset; - dd->ipath_f_get_boardname = ipath_7220_boardname; - dd->ipath_f_init_hwerrors = ipath_7220_init_hwerrors; - dd->ipath_f_early_init = ipath_7220_early_init; - dd->ipath_f_handle_hwerrors = ipath_7220_handle_hwerrors; - dd->ipath_f_quiet_serdes = ipath_7220_quiet_serdes; - dd->ipath_f_bringup_serdes = ipath_7220_bringup_serdes; - dd->ipath_f_clear_tids = ipath_7220_clear_tids; - dd->ipath_f_put_tid = ipath_7220_put_tid; - dd->ipath_f_cleanup = ipath_setup_7220_cleanup; - dd->ipath_f_setextled = ipath_setup_7220_setextled; - dd->ipath_f_get_base_info = ipath_7220_get_base_info; - dd->ipath_f_free_irq = ipath_7220_free_irq; - dd->ipath_f_tidtemplate = ipath_7220_tidtemplate; - dd->ipath_f_intr_fallback = ipath_7220_intr_fallback; - dd->ipath_f_xgxs_reset = ipath_7220_xgxs_reset; - dd->ipath_f_get_ib_cfg = ipath_7220_get_ib_cfg; - dd->ipath_f_set_ib_cfg = ipath_7220_set_ib_cfg; - dd->ipath_f_config_jint = ipath_7220_config_jint; - dd->ipath_f_config_ports = ipath_7220_config_ports; - dd->ipath_f_read_counters = ipath_7220_read_counters; - dd->ipath_f_get_msgheader = ipath_7220_get_msgheader; - dd->ipath_f_ib_updown = ipath_7220_ib_updown; - - /* initialize chip-specific variables */ - ipath_init_7220_variables(dd); -} diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index b3d7efcdf021..6559af60bffd 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -1030,8 +1030,6 @@ void ipath_free_data(struct ipath_portdata *dd); u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *); void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start, unsigned len, int avail); -void ipath_init_iba7220_funcs(struct ipath_devdata *); -void ipath_init_iba6120_funcs(struct ipath_devdata *); void ipath_init_iba6110_funcs(struct ipath_devdata *); void ipath_get_eeprom_info(struct ipath_devdata *); int ipath_update_eeprom_log(struct ipath_devdata *dd); diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c b/drivers/infiniband/hw/ipath/ipath_sd7220.c deleted file mode 100644 index 2a68d9f624dd..000000000000 --- a/drivers/infiniband/hw/ipath/ipath_sd7220.c +++ /dev/null @@ -1,1462 +0,0 @@ -/* - * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. - * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ -/* - * This file contains all of the code that is specific to the SerDes - * on the InfiniPath 7220 chip. - */ - -#include <linux/pci.h> -#include <linux/delay.h> - -#include "ipath_kernel.h" -#include "ipath_registers.h" -#include "ipath_7220.h" - -/* - * The IBSerDesMappTable is a memory that holds values to be stored in - * various SerDes registers by IBC. It is not part of the normal kregs - * map and is used in exactly one place, hence the #define below. - */ -#define KR_IBSerDesMappTable (0x94000 / (sizeof(uint64_t))) - -/* - * Below used for sdnum parameter, selecting one of the two sections - * used for PCIe, or the single SerDes used for IB. - */ -#define PCIE_SERDES0 0 -#define PCIE_SERDES1 1 - -/* - * The EPB requires addressing in a particular form. EPB_LOC() is intended - * to make #definitions a little more readable. - */ -#define EPB_ADDR_SHF 8 -#define EPB_LOC(chn, elt, reg) \ - (((elt & 0xf) | ((chn & 7) << 4) | ((reg & 0x3f) << 9)) << \ - EPB_ADDR_SHF) -#define EPB_IB_QUAD0_CS_SHF (25) -#define EPB_IB_QUAD0_CS (1U << EPB_IB_QUAD0_CS_SHF) -#define EPB_IB_UC_CS_SHF (26) -#define EPB_PCIE_UC_CS_SHF (27) -#define EPB_GLOBAL_WR (1U << (EPB_ADDR_SHF + 8)) - -/* Forward declarations. */ -static int ipath_sd7220_reg_mod(struct ipath_devdata *dd, int sdnum, u32 loc, - u32 data, u32 mask); -static int ibsd_mod_allchnls(struct ipath_devdata *dd, int loc, int val, - int mask); -static int ipath_sd_trimdone_poll(struct ipath_devdata *dd); -static void ipath_sd_trimdone_monitor(struct ipath_devdata *dd, - const char *where); -static int ipath_sd_setvals(struct ipath_devdata *dd); -static int ipath_sd_early(struct ipath_devdata *dd); -static int ipath_sd_dactrim(struct ipath_devdata *dd); -/* Set the registers that IBC may muck with to their default "preset" values */ -int ipath_sd7220_presets(struct ipath_devdata *dd); -static int ipath_internal_presets(struct ipath_devdata *dd); -/* Tweak the register (CMUCTRL5) that contains the TRIMSELF controls */ -static int ipath_sd_trimself(struct ipath_devdata *dd, int val); -static int epb_access(struct ipath_devdata *dd, int sdnum, int claim); - -void ipath_set_relock_poll(struct ipath_devdata *dd, int ibup); - -/* - * Below keeps track of whether the "once per power-on" initialization has - * been done, because uC code Version 1.32.17 or higher allows the uC to - * be reset at will, and Automatic Equalization may require it. So the - * state of the reset "pin", as reflected in was_reset parameter to - * ipath_sd7220_init() is no longer valid. Instead, we check for the - * actual uC code having been loaded. - */ -static int ipath_ibsd_ucode_loaded(struct ipath_devdata *dd) -{ - if (!dd->serdes_first_init_done && (ipath_sd7220_ib_vfy(dd) > 0)) - dd->serdes_first_init_done = 1; - return dd->serdes_first_init_done; -} - -/* repeat #define for local use. "Real" #define is in ipath_iba7220.c */ -#define INFINIPATH_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL -#define IB_MPREG5 (EPB_LOC(6, 0, 0xE) | (1L << EPB_IB_UC_CS_SHF)) -#define IB_MPREG6 (EPB_LOC(6, 0, 0xF) | (1U << EPB_IB_UC_CS_SHF)) -#define UC_PAR_CLR_D 8 -#define UC_PAR_CLR_M 0xC -#define IB_CTRL2(chn) (EPB_LOC(chn, 7, 3) | EPB_IB_QUAD0_CS) -#define START_EQ1(chan) EPB_LOC(chan, 7, 0x27) - -void ipath_sd7220_clr_ibpar(struct ipath_devdata *dd) -{ - int ret; - - /* clear, then re-enable parity errs */ - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, - UC_PAR_CLR_D, UC_PAR_CLR_M); - if (ret < 0) { - ipath_dev_err(dd, "Failed clearing IBSerDes Parity err\n"); - goto bail; - } - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0, - UC_PAR_CLR_M); - - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - udelay(4); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, - INFINIPATH_HWE_IB_UC_MEMORYPARITYERR); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); -bail: - return; -} - -/* - * After a reset or other unusual event, the epb interface may need - * to be re-synchronized, between the host and the uC. - * returns <0 for failure to resync within IBSD_RESYNC_TRIES (not expected) - */ -#define IBSD_RESYNC_TRIES 3 -#define IB_PGUDP(chn) (EPB_LOC((chn), 2, 1) | EPB_IB_QUAD0_CS) -#define IB_CMUDONE(chn) (EPB_LOC((chn), 7, 0xF) | EPB_IB_QUAD0_CS) - -static int ipath_resync_ibepb(struct ipath_devdata *dd) -{ - int ret, pat, tries, chn; - u32 loc; - - ret = -1; - chn = 0; - for (tries = 0; tries < (4 * IBSD_RESYNC_TRIES); ++tries) { - loc = IB_PGUDP(chn); - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0); - if (ret < 0) { - ipath_dev_err(dd, "Failed read in resync\n"); - continue; - } - if (ret != 0xF0 && ret != 0x55 && tries == 0) - ipath_dev_err(dd, "unexpected pattern in resync\n"); - pat = ret ^ 0xA5; /* alternate F0 and 55 */ - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, pat, 0xFF); - if (ret < 0) { - ipath_dev_err(dd, "Failed write in resync\n"); - continue; - } - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0); - if (ret < 0) { - ipath_dev_err(dd, "Failed re-read in resync\n"); - continue; - } - if (ret != pat) { - ipath_dev_err(dd, "Failed compare1 in resync\n"); - continue; - } - loc = IB_CMUDONE(chn); - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0); - if (ret < 0) { - ipath_dev_err(dd, "Failed CMUDONE rd in resync\n"); - continue; - } - if ((ret & 0x70) != ((chn << 4) | 0x40)) { - ipath_dev_err(dd, "Bad CMUDONE value %02X, chn %d\n", - ret, chn); - continue; - } - if (++chn == 4) - break; /* Success */ - } - ipath_cdbg(VERBOSE, "Resync in %d tries\n", tries); - return (ret > 0) ? 0 : ret; -} - -/* - * Localize the stuff that should be done to change IB uC reset - * returns <0 for errors. - */ -static int ipath_ibsd_reset(struct ipath_devdata *dd, int assert_rst) -{ - u64 rst_val; - int ret = 0; - unsigned long flags; - - rst_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl); - if (assert_rst) { - /* - * Vendor recommends "interrupting" uC before reset, to - * minimize possible glitches. - */ - spin_lock_irqsave(&dd->ipath_sdepb_lock, flags); - epb_access(dd, IB_7220_SERDES, 1); - rst_val |= 1ULL; - /* Squelch possible parity error from _asserting_ reset */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask & - ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR); - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, rst_val); - /* flush write, delay to ensure it took effect */ - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - udelay(2); - /* once it's reset, can remove interrupt */ - epb_access(dd, IB_7220_SERDES, -1); - spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags); - } else { - /* - * Before we de-assert reset, we need to deal with - * possible glitch on the Parity-error line. - * Suppress it around the reset, both in chip-level - * hwerrmask and in IB uC control reg. uC will allow - * it again during startup. - */ - u64 val; - rst_val &= ~(1ULL); - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask & - ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR); - - ret = ipath_resync_ibepb(dd); - if (ret < 0) - ipath_dev_err(dd, "unable to re-sync IB EPB\n"); - - /* set uC control regs to suppress parity errs */ - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG5, 1, 1); - if (ret < 0) - goto bail; - /* IB uC code past Version 1.32.17 allow suppression of wdog */ - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80, - 0x80); - if (ret < 0) { - ipath_dev_err(dd, "Failed to set WDOG disable\n"); - goto bail; - } - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, rst_val); - /* flush write, delay for startup */ - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - udelay(1); - /* clear, then re-enable parity errs */ - ipath_sd7220_clr_ibpar(dd); - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus); - if (val & INFINIPATH_HWE_IB_UC_MEMORYPARITYERR) { - ipath_dev_err(dd, "IBUC Parity still set after RST\n"); - dd->ipath_hwerrmask &= - ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR; - } - ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, - dd->ipath_hwerrmask); - } - -bail: - return ret; -} - -static void ipath_sd_trimdone_monitor(struct ipath_devdata *dd, - const char *where) -{ - int ret, chn, baduns; - u64 val; - - if (!where) - where = "?"; - - /* give time for reset to settle out in EPB */ - udelay(2); - - ret = ipath_resync_ibepb(dd); - if (ret < 0) - ipath_dev_err(dd, "not able to re-sync IB EPB (%s)\n", where); - - /* Do "sacrificial read" to get EPB in sane state after reset */ - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_CTRL2(0), 0, 0); - if (ret < 0) - ipath_dev_err(dd, "Failed TRIMDONE 1st read, (%s)\n", where); - - /* Check/show "summary" Trim-done bit in IBCStatus */ - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus); - if (val & (1ULL << 11)) - ipath_cdbg(VERBOSE, "IBCS TRIMDONE set (%s)\n", where); - else - ipath_dev_err(dd, "IBCS TRIMDONE clear (%s)\n", where); - - udelay(2); - - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80, 0x80); - if (ret < 0) - ipath_dev_err(dd, "Failed Dummy RMW, (%s)\n", where); - udelay(10); - - baduns = 0; - - for (chn = 3; chn >= 0; --chn) { - /* Read CTRL reg for each channel to check TRIMDONE */ - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, - IB_CTRL2(chn), 0, 0); - if (ret < 0) - ipath_dev_err(dd, "Failed checking TRIMDONE, chn %d" - " (%s)\n", chn, where); - - if (!(ret & 0x10)) { - int probe; - baduns |= (1 << chn); - ipath_dev_err(dd, "TRIMDONE cleared on chn %d (%02X)." - " (%s)\n", chn, ret, where); - probe = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, - IB_PGUDP(0), 0, 0); - ipath_dev_err(dd, "probe is %d (%02X)\n", - probe, probe); - probe = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, - IB_CTRL2(chn), 0, 0); - ipath_dev_err(dd, "re-read: %d (%02X)\n", - probe, probe); - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, - IB_CTRL2(chn), 0x10, 0x10); - if (ret < 0) - ipath_dev_err(dd, - "Err on TRIMDONE rewrite1\n"); - } - } - for (chn = 3; chn >= 0; --chn) { - /* Read CTRL reg for each channel to check TRIMDONE */ - if (baduns & (1 << chn)) { - ipath_dev_err(dd, - "Reseting TRIMDONE on chn %d (%s)\n", - chn, where); - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, - IB_CTRL2(chn), 0x10, 0x10); - if (ret < 0) - ipath_dev_err(dd, "Failed re-setting " - "TRIMDONE, chn %d (%s)\n", - chn, where); - } - } -} - -/* - * Below is portion of IBA7220-specific bringup_serdes() that actually - * deals with registers and memory within the SerDes itself. - * Post IB uC code version 1.32.17, was_reset being 1 is not really - * informative, so we double-check. - */ -int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset) -{ - int ret = 1; /* default to failure */ - int first_reset; - int val_stat; - - if (!was_reset) { - /* entered with reset not asserted, we need to do it */ - ipath_ibsd_reset(dd, 1); - ipath_sd_trimdone_monitor(dd, "Driver-reload"); - } - - /* Substitute our deduced value for was_reset */ - ret = ipath_ibsd_ucode_loaded(dd); - if (ret < 0) { - ret = 1; - goto done; - } - first_reset = !ret; /* First reset if IBSD uCode not yet loaded */ - - /* - * Alter some regs per vendor latest doc, reset-defaults - * are not right for IB. - */ - ret = ipath_sd_early(dd); - if (ret < 0) { - ipath_dev_err(dd, "Failed to set IB SERDES early defaults\n"); - ret = 1; - goto done; - } - - /* - * Set DAC manual trim IB. - * We only do this once after chip has been reset (usually - * same as once per system boot). - */ - if (first_reset) { - ret = ipath_sd_dactrim(dd); - if (ret < 0) { - ipath_dev_err(dd, "Failed IB SERDES DAC trim\n"); - ret = 1; - goto done; - } - } - - /* - * Set various registers (DDS and RXEQ) that will be - * controlled by IBC (in 1.2 mode) to reasonable preset values - * Calling the "internal" version avoids the "check for needed" - * and "trimdone monitor" that might be counter-productive. - */ - ret = ipath_internal_presets(dd); - if (ret < 0) { - ipath_dev_err(dd, "Failed to set IB SERDES presets\n"); - ret = 1; - goto done; - } - ret = ipath_sd_trimself(dd, 0x80); - if (ret < 0) { - ipath_dev_err(dd, "Failed to set IB SERDES TRIMSELF\n"); - ret = 1; - goto done; - } - - /* Load image, then try to verify */ - ret = 0; /* Assume success */ - if (first_reset) { - int vfy; - int trim_done; - ipath_dbg("SerDes uC was reset, reloading PRAM\n"); - ret = ipath_sd7220_ib_load(dd); - if (ret < 0) { - ipath_dev_err(dd, "Failed to load IB SERDES image\n"); - ret = 1; - goto done; - } - - /* Loaded image, try to verify */ - vfy = ipath_sd7220_ib_vfy(dd); - if (vfy != ret) { - ipath_dev_err(dd, "SERDES PRAM VFY failed\n"); - ret = 1; - goto done; - } - /* - * Loaded and verified. Almost good... - * hold "success" in ret - */ - ret = 0; - - /* - * Prev steps all worked, continue bringup - * De-assert RESET to uC, only in first reset, to allow - * trimming. - * - * Since our default setup sets START_EQ1 to - * PRESET, we need to clear that for this very first run. - */ - ret = ibsd_mod_allchnls(dd, START_EQ1(0), 0, 0x38); - if (ret < 0) { - ipath_dev_err(dd, "Failed clearing START_EQ1\n"); - ret = 1; - goto done; - } - - ipath_ibsd_reset(dd, 0); - /* - * If this is not the first reset, trimdone should be set - * already. - */ - trim_done = ipath_sd_trimdone_poll(dd); - /* - * Whether or not trimdone succeeded, we need to put the - * uC back into reset to avoid a possible fight with the - * IBC state-machine. - */ - ipath_ibsd_reset(dd, 1); - - if (!trim_done) { - ipath_dev_err(dd, "No TRIMDONE seen\n"); - ret = 1; - goto done; - } - - ipath_sd_trimdone_monitor(dd, "First-reset"); - /* Remember so we do not re-do the load, dactrim, etc. */ - dd->serdes_first_init_done = 1; - } - /* - * Setup for channel training and load values for - * RxEq and DDS in tables used by IBC in IB1.2 mode - */ - - val_stat = ipath_sd_setvals(dd); - if (val_stat < 0) - ret = 1; -done: - /* start relock timer regardless, but start at 1 second */ - ipath_set_relock_poll(dd, -1); - return ret; -} - -#define EPB_ACC_REQ 1 -#define EPB_ACC_GNT 0x100 -#define EPB_DATA_MASK 0xFF -#define EPB_RD (1ULL << 24) -#define EPB_TRANS_RDY (1ULL << 31) -#define EPB_TRANS_ERR (1ULL << 30) -#define EPB_TRANS_TRIES 5 - -/* - * query, claim, release ownership of the EPB (External Parallel Bus) - * for a specified SERDES. - * the "claim" parameter is >0 to claim, <0 to release, 0 to query. - * Returns <0 for errors, >0 if we had ownership, else 0. - */ -static int epb_access(struct ipath_devdata *dd, int sdnum, int claim) -{ - u16 acc; - u64 accval; - int owned = 0; - u64 oct_sel = 0; - - switch (sdnum) { - case IB_7220_SERDES : - /* - * The IB SERDES "ownership" is fairly simple. A single each - * request/grant. - */ - acc = dd->ipath_kregs->kr_ib_epbacc; - break; - case PCIE_SERDES0 : - case PCIE_SERDES1 : - /* PCIe SERDES has two "octants", need to select which */ - acc = dd->ipath_kregs->kr_pcie_epbacc; - oct_sel = (2 << (sdnum - PCIE_SERDES0)); - break; - default : - return 0; - } - - /* Make sure any outstanding transaction was seen */ - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - udelay(15); - - accval = ipath_read_kreg32(dd, acc); - - owned = !!(accval & EPB_ACC_GNT); - if (claim < 0) { - /* Need to release */ - u64 pollval; - /* - * The only writeable bits are the request and CS. - * Both should be clear - */ - u64 newval = 0; - ipath_write_kreg(dd, acc, newval); - /* First read after write is not trustworthy */ - pollval = ipath_read_kreg32(dd, acc); - udelay(5); - pollval = ipath_read_kreg32(dd, acc); - if (pollval & EPB_ACC_GNT) - owned = -1; - } else if (claim > 0) { - /* Need to claim */ - u64 pollval; - u64 newval = EPB_ACC_REQ | oct_sel; - ipath_write_kreg(dd, acc, newval); - /* First read after write is not trustworthy */ - pollval = ipath_read_kreg32(dd, acc); - udelay(5); - pollval = ipath_read_kreg32(dd, acc); - if (!(pollval & EPB_ACC_GNT)) - owned = -1; - } - return owned; -} - -/* - * Lemma to deal with race condition of write..read to epb regs - */ -static int epb_trans(struct ipath_devdata *dd, u16 reg, u64 i_val, u64 *o_vp) -{ - int tries; - u64 transval; - - - ipath_write_kreg(dd, reg, i_val); - /* Throw away first read, as RDY bit may be stale */ - transval = ipath_read_kreg64(dd, reg); - - for (tries = EPB_TRANS_TRIES; tries; --tries) { - transval = ipath_read_kreg32(dd, reg); - if (transval & EPB_TRANS_RDY) - break; - udelay(5); - } - if (transval & EPB_TRANS_ERR) - return -1; - if (tries > 0 && o_vp) - *o_vp = transval; - return tries; -} - -/** - * - * ipath_sd7220_reg_mod - modify SERDES register - * @dd: the infinipath device - * @sdnum: which SERDES to access - * @loc: location - channel, element, register, as packed by EPB_LOC() macro. - * @wd: Write Data - value to set in register - * @mask: ones where data should be spliced into reg. - * - * Basic register read/modify/write, with un-needed accesses elided. That is, - * a mask of zero will prevent write, while a mask of 0xFF will prevent read. - * returns current (presumed, if a write was done) contents of selected - * register, or <0 if errors. - */ -static int ipath_sd7220_reg_mod(struct ipath_devdata *dd, int sdnum, u32 loc, - u32 wd, u32 mask) -{ - u16 trans; - u64 transval; - int owned; - int tries, ret; - unsigned long flags; - - switch (sdnum) { - case IB_7220_SERDES : - trans = dd->ipath_kregs->kr_ib_epbtrans; - break; - case PCIE_SERDES0 : - case PCIE_SERDES1 : - trans = dd->ipath_kregs->kr_pcie_epbtrans; - break; - default : - return -1; - } - - /* - * All access is locked in software (vs other host threads) and - * hardware (vs uC access). - */ - spin_lock_irqsave(&dd->ipath_sdepb_lock, flags); - - owned = epb_access(dd, sdnum, 1); - if (owned < 0) { - spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags); - return -1; - } - ret = 0; - for (tries = EPB_TRANS_TRIES; tries; --tries) { - transval = ipath_read_kreg32(dd, trans); - if (transval & EPB_TRANS_RDY) - break; - udelay(5); - } - - if (tries > 0) { - tries = 1; /* to make read-skip work */ - if (mask != 0xFF) { - /* - * Not a pure write, so need to read. - * loc encodes chip-select as well as address - */ - transval = loc | EPB_RD; - tries = epb_trans(dd, trans, transval, &transval); - } - if (tries > 0 && mask != 0) { - /* - * Not a pure read, so need to write. - */ - wd = (wd & mask) | (transval & ~mask); - transval = loc | (wd & EPB_DATA_MASK); - tries = epb_trans(dd, trans, transval, &transval); - } - } - /* else, failed to see ready, what error-handling? */ - - /* - * Release bus. Failure is an error. - */ - if (epb_access(dd, sdnum, -1) < 0) - ret = -1; - else - ret = transval & EPB_DATA_MASK; - - spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags); - if (tries <= 0) - ret = -1; - return ret; -} - -#define EPB_ROM_R (2) -#define EPB_ROM_W (1) -/* - * Below, all uC-related, use appropriate UC_CS, depending - * on which SerDes is used. - */ -#define EPB_UC_CTL EPB_LOC(6, 0, 0) -#define EPB_MADDRL EPB_LOC(6, 0, 2) -#define EPB_MADDRH EPB_LOC(6, 0, 3) -#define EPB_ROMDATA EPB_LOC(6, 0, 4) -#define EPB_RAMDATA EPB_LOC(6, 0, 5) - -/* Transfer date to/from uC Program RAM of IB or PCIe SerDes */ -static int ipath_sd7220_ram_xfer(struct ipath_devdata *dd, int sdnum, u32 loc, - u8 *buf, int cnt, int rd_notwr) -{ - u16 trans; - u64 transval; - u64 csbit; - int owned; - int tries; - int sofar; - int addr; - int ret; - unsigned long flags; - const char *op; - - /* Pick appropriate transaction reg and "Chip select" for this serdes */ - switch (sdnum) { - case IB_7220_SERDES : - csbit = 1ULL << EPB_IB_UC_CS_SHF; - trans = dd->ipath_kregs->kr_ib_epbtrans; - break; - case PCIE_SERDES0 : - case PCIE_SERDES1 : - /* PCIe SERDES has uC "chip select" in different bit, too */ - csbit = 1ULL << EPB_PCIE_UC_CS_SHF; - trans = dd->ipath_kregs->kr_pcie_epbtrans; - break; - default : - return -1; - } - - op = rd_notwr ? "Rd" : "Wr"; - spin_lock_irqsave(&dd->ipath_sdepb_lock, flags); - - owned = epb_access(dd, sdnum, 1); - if (owned < 0) { - spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags); - ipath_dbg("Could not get %s access to %s EPB: %X, loc %X\n", - op, (sdnum == IB_7220_SERDES) ? "IB" : "PCIe", - owned, loc); - return -1; - } - - /* - * In future code, we may need to distinguish several address ranges, - * and select various memories based on this. For now, just trim - * "loc" (location including address and memory select) to - * "addr" (address within memory). we will only support PRAM - * The memory is 8KB. - */ - addr = loc & 0x1FFF; - for (tries = EPB_TRANS_TRIES; tries; --tries) { - transval = ipath_read_kreg32(dd, trans); - if (transval & EPB_TRANS_RDY) - break; - udelay(5); - } - - sofar = 0; - if (tries <= 0) - ipath_dbg("No initial RDY on EPB access request\n"); - else { - /* - * Every "memory" access is doubly-indirect. - * We set two bytes of address, then read/write - * one or mores bytes of data. - */ - - /* First, we set control to "Read" or "Write" */ - transval = csbit | EPB_UC_CTL | - (rd_notwr ? EPB_ROM_R : EPB_ROM_W); - tries = epb_trans(dd, trans, transval, &transval); - if (tries <= 0) - ipath_dbg("No EPB response to uC %s cmd\n", op); - while (tries > 0 && sofar < cnt) { - if (!sofar) { - /* Only set address at start of chunk */ - int addrbyte = (addr + sofar) >> 8; - transval = csbit | EPB_MADDRH | addrbyte; - tries = epb_trans(dd, trans, transval, - &transval); - if (tries <= 0) { - ipath_dbg("No EPB response ADDRH\n"); - break; - } - addrbyte = (addr + sofar) & 0xFF; - transval = csbit | EPB_MADDRL | addrbyte; - tries = epb_trans(dd, trans, transval, - &transval); - if (tries <= 0) { - ipath_dbg("No EPB response ADDRL\n"); - break; - } - } - - if (rd_notwr) - transval = csbit | EPB_ROMDATA | EPB_RD; - else - transval = csbit | EPB_ROMDATA | buf[sofar]; - tries = epb_trans(dd, trans, transval, &transval); - if (tries <= 0) { - ipath_dbg("No EPB response DATA\n"); - break; - } - if (rd_notwr) - buf[sofar] = transval & EPB_DATA_MASK; - ++sofar; - } - /* Finally, clear control-bit for Read or Write */ - transval = csbit | EPB_UC_CTL; - tries = epb_trans(dd, trans, transval, &transval); - if (tries <= 0) - ipath_dbg("No EPB response to drop of uC %s cmd\n", op); - } - - ret = sofar; - /* Release bus. Failure is an error */ - if (epb_access(dd, sdnum, -1) < 0) - ret = -1; - - spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags); - if (tries <= 0) { - ipath_dbg("SERDES PRAM %s failed after %d bytes\n", op, sofar); - ret = -1; - } - return ret; -} - -#define PROG_CHUNK 64 - -int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum, - u8 *img, int len, int offset) -{ - int cnt, sofar, req; - - sofar = 0; - while (sofar < len) { - req = len - sofar; - if (req > PROG_CHUNK) - req = PROG_CHUNK; - cnt = ipath_sd7220_ram_xfer(dd, sdnum, offset + sofar, - img + sofar, req, 0); - if (cnt < req) { - sofar = -1; - break; - } - sofar += req; - } - return sofar; -} - -#define VFY_CHUNK 64 -#define SD_PRAM_ERROR_LIMIT 42 - -int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum, - const u8 *img, int len, int offset) -{ - int cnt, sofar, req, idx, errors; - unsigned char readback[VFY_CHUNK]; - - errors = 0; - sofar = 0; - while (sofar < len) { - req = len - sofar; - if (req > VFY_CHUNK) - req = VFY_CHUNK; - cnt = ipath_sd7220_ram_xfer(dd, sdnum, sofar + offset, - readback, req, 1); - if (cnt < req) { - /* failed in read itself */ - sofar = -1; - break; - } - for (idx = 0; idx < cnt; ++idx) { - if (readback[idx] != img[idx+sofar]) - ++errors; - } - sofar += cnt; - } - return errors ? -errors : sofar; -} - -/* IRQ not set up at this point in init, so we poll. */ -#define IB_SERDES_TRIM_DONE (1ULL << 11) -#define TRIM_TMO (30) - -static int ipath_sd_trimdone_poll(struct ipath_devdata *dd) -{ - int trim_tmo, ret; - uint64_t val; - - /* - * Default to failure, so IBC will not start - * without IB_SERDES_TRIM_DONE. - */ - ret = 0; - for (trim_tmo = 0; trim_tmo < TRIM_TMO; ++trim_tmo) { - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus); - if (val & IB_SERDES_TRIM_DONE) { - ipath_cdbg(VERBOSE, "TRIMDONE after %d\n", trim_tmo); - ret = 1; - break; - } - msleep(10); - } - if (trim_tmo >= TRIM_TMO) { - ipath_dev_err(dd, "No TRIMDONE in %d tries\n", trim_tmo); - ret = 0; - } - return ret; -} - -#define TX_FAST_ELT (9) - -/* - * Set the "negotiation" values for SERDES. These are used by the IB1.2 - * link negotiation. Macros below are attempt to keep the values a - * little more human-editable. - * First, values related to Drive De-emphasis Settings. - */ - -#define NUM_DDS_REGS 6 -#define DDS_REG_MAP 0x76A910 /* LSB-first list of regs (in elt 9) to mod */ - -#define DDS_VAL(amp_d, main_d, ipst_d, ipre_d, amp_s, main_s, ipst_s, ipre_s) \ - { { ((amp_d & 0x1F) << 1) | 1, ((amp_s & 0x1F) << 1) | 1, \ - (main_d << 3) | 4 | (ipre_d >> 2), \ - (main_s << 3) | 4 | (ipre_s >> 2), \ - ((ipst_d & 0xF) << 1) | ((ipre_d & 3) << 6) | 0x21, \ - ((ipst_s & 0xF) << 1) | ((ipre_s & 3) << 6) | 0x21 } } - -static struct dds_init { - uint8_t reg_vals[NUM_DDS_REGS]; -} dds_init_vals[] = { - /* DDR(FDR) SDR(HDR) */ - /* Vendor recommends below for 3m cable */ -#define DDS_3M 0 - DDS_VAL(31, 19, 12, 0, 29, 22, 9, 0), - DDS_VAL(31, 12, 15, 4, 31, 15, 15, 1), - DDS_VAL(31, 13, 15, 3, 31, 16, 15, 0), - DDS_VAL(31, 14, 15, 2, 31, 17, 14, 0), - DDS_VAL(31, 15, 15, 1, 31, 18, 13, 0), - DDS_VAL(31, 16, 15, 0, 31, 19, 12, 0), - DDS_VAL(31, 17, 14, 0, 31, 20, 11, 0), - DDS_VAL(31, 18, 13, 0, 30, 21, 10, 0), - DDS_VAL(31, 20, 11, 0, 28, 23, 8, 0), - DDS_VAL(31, 21, 10, 0, 27, 24, 7, 0), - DDS_VAL(31, 22, 9, 0, 26, 25, 6, 0), - DDS_VAL(30, 23, 8, 0, 25, 26, 5, 0), - DDS_VAL(29, 24, 7, 0, 23, 27, 4, 0), - /* Vendor recommends below for 1m cable */ -#define DDS_1M 13 - DDS_VAL(28, 25, 6, 0, 21, 28, 3, 0), - DDS_VAL(27, 26, 5, 0, 19, 29, 2, 0), - DDS_VAL(25, 27, 4, 0, 17, 30, 1, 0) -}; - -/* - * Next, values related to Receive Equalization. - * In comments, FDR (Full) is IB DDR, HDR (Half) is IB SDR - */ -/* Hardware packs an element number and register address thus: */ -#define RXEQ_INIT_RDESC(elt, addr) (((elt) & 0xF) | ((addr) << 4)) -#define RXEQ_VAL(elt, adr, val0, val1, val2, val3) \ - {RXEQ_INIT_RDESC((elt), (adr)), {(val0), (val1), (val2), (val3)} } - -#define RXEQ_VAL_ALL(elt, adr, val) \ - {RXEQ_INIT_RDESC((elt), (adr)), {(val), (val), (val), (val)} } - -#define RXEQ_SDR_DFELTH 0 -#define RXEQ_SDR_TLTH 0 -#define RXEQ_SDR_G1CNT_Z1CNT 0x11 -#define RXEQ_SDR_ZCNT 23 - -static struct rxeq_init { - u16 rdesc; /* in form used in SerDesDDSRXEQ */ - u8 rdata[4]; -} rxeq_init_vals[] = { - /* Set Rcv Eq. to Preset node */ - RXEQ_VAL_ALL(7, 0x27, 0x10), - /* Set DFELTHFDR/HDR thresholds */ - RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */ - RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */ - /* Set TLTHFDR/HDR threshold */ - RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */ - RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */ - /* Set Preamp setting 2 (ZFR/ZCNT) */ - RXEQ_VAL(7, 0x1B, 12, 12, 12, 12), /* FDR */ - RXEQ_VAL(7, 0x1C, 12, 12, 12, 12), /* HDR */ - /* Set Preamp DC gain and Setting 1 (GFR/GHR) */ - RXEQ_VAL(7, 0x1E, 0x10, 0x10, 0x10, 0x10), /* FDR */ - RXEQ_VAL(7, 0x1F, 0x10, 0x10, 0x10, 0x10), /* HDR */ - /* Toggle RELOCK (in VCDL_CTRL0) to lock to data */ - RXEQ_VAL_ALL(6, 6, 0x20), /* Set D5 High */ - RXEQ_VAL_ALL(6, 6, 0), /* Set D5 Low */ -}; - -/* There are 17 values from vendor, but IBC only accesses the first 16 */ -#define DDS_ROWS (16) -#define RXEQ_ROWS ARRAY_SIZE(rxeq_init_vals) - -static int ipath_sd_setvals(struct ipath_devdata *dd) -{ - int idx, midx; - int min_idx; /* Minimum index for this portion of table */ - uint32_t dds_reg_map; - u64 __iomem *taddr, *iaddr; - uint64_t data; - uint64_t sdctl; - - taddr = dd->ipath_kregbase + KR_IBSerDesMappTable; - iaddr = dd->ipath_kregbase + dd->ipath_kregs->kr_ib_ddsrxeq; - - /* - * Init the DDS section of the table. - * Each "row" of the table provokes NUM_DDS_REG writes, to the - * registers indicated in DDS_REG_MAP. - */ - sdctl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl); - sdctl = (sdctl & ~(0x1f << 8)) | (NUM_DDS_REGS << 8); - sdctl = (sdctl & ~(0x1f << 13)) | (RXEQ_ROWS << 13); - ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, sdctl); - - /* - * Iterate down table within loop for each register to store. - */ - dds_reg_map = DDS_REG_MAP; - for (idx = 0; idx < NUM_DDS_REGS; ++idx) { - data = ((dds_reg_map & 0xF) << 4) | TX_FAST_ELT; - writeq(data, iaddr + idx); - mmiowb(); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - dds_reg_map >>= 4; - for (midx = 0; midx < DDS_ROWS; ++midx) { - u64 __iomem *daddr = taddr + ((midx << 4) + idx); - data = dds_init_vals[midx].reg_vals[idx]; - writeq(data, daddr); - mmiowb(); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - } /* End inner for (vals for this reg, each row) */ - } /* end outer for (regs to be stored) */ - - /* - * Init the RXEQ section of the table. As explained above the table - * rxeq_init_vals[], this runs in a different order, as the pattern - * of register references is more complex, but there are only - * four "data" values per register. - */ - min_idx = idx; /* RXEQ indices pick up where DDS left off */ - taddr += 0x100; /* RXEQ data is in second half of table */ - /* Iterate through RXEQ register addresses */ - for (idx = 0; idx < RXEQ_ROWS; ++idx) { - int didx; /* "destination" */ - int vidx; - - /* didx is offset by min_idx to address RXEQ range of regs */ - didx = idx + min_idx; - /* Store the next RXEQ register address */ - writeq(rxeq_init_vals[idx].rdesc, iaddr + didx); - mmiowb(); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - /* Iterate through RXEQ values */ - for (vidx = 0; vidx < 4; vidx++) { - data = rxeq_init_vals[idx].rdata[vidx]; - writeq(data, taddr + (vidx << 6) + idx); - mmiowb(); - ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); - } - } /* end outer for (Reg-writes for RXEQ) */ - return 0; -} - -#define CMUCTRL5 EPB_LOC(7, 0, 0x15) -#define RXHSCTRL0(chan) EPB_LOC(chan, 6, 0) -#define VCDL_DAC2(chan) EPB_LOC(chan, 6, 5) -#define VCDL_CTRL0(chan) EPB_LOC(chan, 6, 6) -#define VCDL_CTRL2(chan) EPB_LOC(chan, 6, 8) -#define START_EQ2(chan) EPB_LOC(chan, 7, 0x28) - -static int ibsd_sto_noisy(struct ipath_devdata *dd, int loc, int val, int mask) -{ - int ret = -1; - int sloc; /* shifted loc, for messages */ - - loc |= (1U << EPB_IB_QUAD0_CS_SHF); - sloc = loc >> EPB_ADDR_SHF; - - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, mask); - if (ret < 0) - ipath_dev_err(dd, "Write failed: elt %d," - " addr 0x%X, chnl %d, val 0x%02X, mask 0x%02X\n", - (sloc & 0xF), (sloc >> 9) & 0x3f, (sloc >> 4) & 7, - val & 0xFF, mask & 0xFF); - return ret; -} - -/* - * Repeat a "store" across all channels of the IB SerDes. - * Although nominally it inherits the "read value" of the last - * channel it modified, the only really useful return is <0 for - * failure, >= 0 for success. The parameter 'loc' is assumed to - * be the location for the channel-0 copy of the register to - * be modified. - */ -static int ibsd_mod_allchnls(struct ipath_devdata *dd, int loc, int val, - int mask) -{ - int ret = -1; - int chnl; - - if (loc & EPB_GLOBAL_WR) { - /* - * Our caller has assured us that we can set all four - * channels at once. Trust that. If mask is not 0xFF, - * we will read the _specified_ channel for our starting - * value. - */ - loc |= (1U << EPB_IB_QUAD0_CS_SHF); - chnl = (loc >> (4 + EPB_ADDR_SHF)) & 7; - if (mask != 0xFF) { - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, - loc & ~EPB_GLOBAL_WR, 0, 0); - if (ret < 0) { - int sloc = loc >> EPB_ADDR_SHF; - ipath_dev_err(dd, "pre-read failed: elt %d," - " addr 0x%X, chnl %d\n", (sloc & 0xF), - (sloc >> 9) & 0x3f, chnl); - return ret; - } - val = (ret & ~mask) | (val & mask); - } - loc &= ~(7 << (4+EPB_ADDR_SHF)); - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, 0xFF); - if (ret < 0) { - int sloc = loc >> EPB_ADDR_SHF; - ipath_dev_err(dd, "Global WR failed: elt %d," - " addr 0x%X, val %02X\n", - (sloc & 0xF), (sloc >> 9) & 0x3f, val); - } - return ret; - } - /* Clear "channel" and set CS so we can simply iterate */ - loc &= ~(7 << (4+EPB_ADDR_SHF)); - loc |= (1U << EPB_IB_QUAD0_CS_SHF); - for (chnl = 0; chnl < 4; ++chnl) { - int cloc; - cloc = loc | (chnl << (4+EPB_ADDR_SHF)); - ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, cloc, val, mask); - if (ret < 0) { - int sloc = loc >> EPB_ADDR_SHF; - ipath_dev_err(dd, "Write failed: elt %d," - " addr 0x%X, chnl %d, val 0x%02X," - " mask 0x%02X\n", - (sloc & 0xF), (sloc >> 9) & 0x3f, chnl, - val & 0xFF, mask & 0xFF); - break; - } - } - return ret; -} - -/* - * Set the Tx values normally modified by IBC in IB1.2 mode to default - * values, as gotten from first row of init table. - */ -static int set_dds_vals(struct ipath_devdata *dd, struct dds_init *ddi) -{ - int ret; - int idx, reg, data; - uint32_t regmap; - - regmap = DDS_REG_MAP; - for (idx = 0; idx < NUM_DDS_REGS; ++idx) { - reg = (regmap & 0xF); - regmap >>= 4; - data = ddi->reg_vals[idx]; - /* Vendor says RMW not needed for these regs, use 0xFF mask */ - ret = ibsd_mod_allchnls(dd, EPB_LOC(0, 9, reg), data, 0xFF); - if (ret < 0) - break; - } - return ret; -} - -/* - * Set the Rx values normally modified by IBC in IB1.2 mode to default - * values, as gotten from selected column of init table. - */ -static int set_rxeq_vals(struct ipath_devdata *dd, int vsel) -{ - int ret; - int ridx; - int cnt = ARRAY_SIZE(rxeq_init_vals); - - for (ridx = 0; ridx < cnt; ++ridx) { - int elt, reg, val, loc; - elt = rxeq_init_vals[ridx].rdesc & 0xF; - reg = rxeq_init_vals[ridx].rdesc >> 4; - loc = EPB_LOC(0, elt, reg); - val = rxeq_init_vals[ridx].rdata[vsel]; - /* mask of 0xFF, because hardware does full-byte store. */ - ret = ibsd_mod_allchnls(dd, loc, val, 0xFF); - if (ret < 0) - break; - } - return ret; -} - -/* - * Set the default values (row 0) for DDR Driver Demphasis. - * we do this initially and whenever we turn off IB-1.2 - * The "default" values for Rx equalization are also stored to - * SerDes registers. Formerly (and still default), we used set 2. - * For experimenting with cables and link-partners, we allow changing - * that via a module parameter. - */ -static unsigned ipath_rxeq_set = 2; -module_param_named(rxeq_default_set, ipath_rxeq_set, uint, - S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(rxeq_default_set, - "Which set [0..3] of Rx Equalization values is default"); - -static int ipath_internal_presets(struct ipath_devdata *dd) -{ - int ret = 0; - - ret = set_dds_vals(dd, dds_init_vals + DDS_3M); - - if (ret < 0) - ipath_dev_err(dd, "Failed to set default DDS values\n"); - ret = set_rxeq_vals(dd, ipath_rxeq_set & 3); - if (ret < 0) - ipath_dev_err(dd, "Failed to set default RXEQ values\n"); - return ret; -} - -int ipath_sd7220_presets(struct ipath_devdata *dd) -{ - int ret = 0; - - if (!dd->ipath_presets_needed) - return ret; - dd->ipath_presets_needed = 0; - /* Assert uC reset, so we don't clash with it. */ - ipath_ibsd_reset(dd, 1); - udelay(2); - ipath_sd_trimdone_monitor(dd, "link-down"); - - ret = ipath_internal_presets(dd); -return ret; -} - -static int ipath_sd_trimself(struct ipath_devdata *dd, int val) -{ - return ibsd_sto_noisy(dd, CMUCTRL5, val, 0xFF); -} - -static int ipath_sd_early(struct ipath_devdata *dd) -{ - int ret = -1; /* Default failed */ - int chnl; - - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, RXHSCTRL0(chnl), 0xD4, 0xFF); - if (ret < 0) - goto bail; - } - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, VCDL_DAC2(chnl), 0x2D, 0xFF); - if (ret < 0) - goto bail; - } - /* more fine-tuning of what will be default */ - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, VCDL_CTRL2(chnl), 3, 0xF); - if (ret < 0) - goto bail; - } - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, START_EQ1(chnl), 0x10, 0xFF); - if (ret < 0) - goto bail; - } - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, START_EQ2(chnl), 0x30, 0xFF); - if (ret < 0) - goto bail; - } -bail: - return ret; -} - -#define BACTRL(chnl) EPB_LOC(chnl, 6, 0x0E) -#define LDOUTCTRL1(chnl) EPB_LOC(chnl, 7, 6) -#define RXHSSTATUS(chnl) EPB_LOC(chnl, 6, 0xF) - -static int ipath_sd_dactrim(struct ipath_devdata *dd) -{ - int ret = -1; /* Default failed */ - int chnl; - - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, BACTRL(chnl), 0x40, 0xFF); - if (ret < 0) - goto bail; - } - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, LDOUTCTRL1(chnl), 0x04, 0xFF); - if (ret < 0) - goto bail; - } - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, RXHSSTATUS(chnl), 0x04, 0xFF); - if (ret < 0) - goto bail; - } - /* - * delay for max possible number of steps, with slop. - * Each step is about 4usec. - */ - udelay(415); - for (chnl = 0; chnl < 4; ++chnl) { - ret = ibsd_sto_noisy(dd, LDOUTCTRL1(chnl), 0x00, 0xFF); - if (ret < 0) - goto bail; - } -bail: - return ret; -} - -#define RELOCK_FIRST_MS 3 -#define RXLSPPM(chan) EPB_LOC(chan, 0, 2) -void ipath_toggle_rclkrls(struct ipath_devdata *dd) -{ - int loc = RXLSPPM(0) | EPB_GLOBAL_WR; - int ret; - - ret = ibsd_mod_allchnls(dd, loc, 0, 0x80); - if (ret < 0) - ipath_dev_err(dd, "RCLKRLS failed to clear D7\n"); - else { - udelay(1); - ibsd_mod_allchnls(dd, loc, 0x80, 0x80); - } - /* And again for good measure */ - udelay(1); - ret = ibsd_mod_allchnls(dd, loc, 0, 0x80); - if (ret < 0) - ipath_dev_err(dd, "RCLKRLS failed to clear D7\n"); - else { - udelay(1); - ibsd_mod_allchnls(dd, loc, 0x80, 0x80); - } - /* Now reset xgxs and IBC to complete the recovery */ - dd->ipath_f_xgxs_reset(dd); -} - -/* - * Shut down the timer that polls for relock occasions, if needed - * this is "hooked" from ipath_7220_quiet_serdes(), which is called - * just before ipath_shutdown_device() in ipath_driver.c shuts down all - * the other timers - */ -void ipath_shutdown_relock_poll(struct ipath_devdata *dd) -{ - struct ipath_relock *irp = &dd->ipath_relock_singleton; - if (atomic_read(&irp->ipath_relock_timer_active)) { - del_timer_sync(&irp->ipath_relock_timer); - atomic_set(&irp->ipath_relock_timer_active, 0); - } -} - -static unsigned ipath_relock_by_timer = 1; -module_param_named(relock_by_timer, ipath_relock_by_timer, uint, - S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(relock_by_timer, "Allow relock attempt if link not up"); - -static void ipath_run_relock(unsigned long opaque) -{ - struct ipath_devdata *dd = (struct ipath_devdata *)opaque; - struct ipath_relock *irp = &dd->ipath_relock_singleton; - u64 val, ltstate; - - if (!(dd->ipath_flags & IPATH_INITTED)) { - /* Not yet up, just reenable the timer for later */ - irp->ipath_relock_interval = HZ; - mod_timer(&irp->ipath_relock_timer, jiffies + HZ); - return; - } - - /* - * Check link-training state for "stuck" state. - * if found, try relock and schedule another try at - * exponentially growing delay, maxed at one second. - * if not stuck, our work is done. - */ - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus); - ltstate = ipath_ib_linktrstate(dd, val); - - if (ltstate <= INFINIPATH_IBCS_LT_STATE_CFGWAITRMT - && ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) { - int timeoff; - /* Not up yet. Try again, if allowed by module-param */ - if (ipath_relock_by_timer) { - if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) - ipath_cdbg(VERBOSE, "Skip RELOCK in AUTONEG\n"); - else if (!(dd->ipath_flags & IPATH_IB_LINK_DISABLED)) { - ipath_cdbg(VERBOSE, "RELOCK\n"); - ipath_toggle_rclkrls(dd); - } - } - /* re-set timer for next check */ - timeoff = irp->ipath_relock_interval << 1; - if (timeoff > HZ) - timeoff = HZ; - irp->ipath_relock_interval = timeoff; - - mod_timer(&irp->ipath_relock_timer, jiffies + timeoff); - } else { - /* Up, so no more need to check so often */ - mod_timer(&irp->ipath_relock_timer, jiffies + HZ); - } -} - -void ipath_set_relock_poll(struct ipath_devdata *dd, int ibup) -{ - struct ipath_relock *irp = &dd->ipath_relock_singleton; - - if (ibup > 0) { - /* we are now up, so relax timer to 1 second interval */ - if (atomic_read(&irp->ipath_relock_timer_active)) - mod_timer(&irp->ipath_relock_timer, jiffies + HZ); - } else { - /* Transition to down, (re-)set timer to short interval. */ - int timeout; - timeout = (HZ * ((ibup == -1) ? 1000 : RELOCK_FIRST_MS))/1000; - if (timeout == 0) - timeout = 1; - /* If timer has not yet been started, do so. */ - if (atomic_inc_return(&irp->ipath_relock_timer_active) == 1) { - init_timer(&irp->ipath_relock_timer); - irp->ipath_relock_timer.function = ipath_run_relock; - irp->ipath_relock_timer.data = (unsigned long) dd; - irp->ipath_relock_interval = timeout; - irp->ipath_relock_timer.expires = jiffies + timeout; - add_timer(&irp->ipath_relock_timer); - } else { - irp->ipath_relock_interval = timeout; - mod_timer(&irp->ipath_relock_timer, jiffies + timeout); - atomic_dec(&irp->ipath_relock_timer_active); - } - } -} - diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220_img.c b/drivers/infiniband/hw/ipath/ipath_sd7220_img.c deleted file mode 100644 index 5ef59da9270a..000000000000 --- a/drivers/infiniband/hw/ipath/ipath_sd7220_img.c +++ /dev/null @@ -1,1082 +0,0 @@ -/* - * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * This file contains the memory image from the vendor, to be copied into - * the IB SERDES of the IBA7220 during initialization. - * The file also includes the two functions which use this image. - */ -#include <linux/pci.h> -#include <linux/delay.h> - -#include "ipath_kernel.h" -#include "ipath_registers.h" -#include "ipath_7220.h" - -static unsigned char ipath_sd7220_ib_img[] = { -/*0000*/0x02, 0x0A, 0x29, 0x02, 0x0A, 0x87, 0xE5, 0xE6, - 0x30, 0xE6, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, -/*0010*/0x00, 0xE5, 0xE2, 0x30, 0xE4, 0x04, 0x7E, 0x01, - 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x08, -/*0020*/0x53, 0xF9, 0xF7, 0xE4, 0xF5, 0xFE, 0x80, 0x08, - 0x7F, 0x0A, 0x12, 0x17, 0x31, 0x12, 0x0E, 0xA2, -/*0030*/0x75, 0xFC, 0x08, 0xE4, 0xF5, 0xFD, 0xE5, 0xE7, - 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0x22, 0x00, -/*0040*/0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x75, - 0x51, 0x01, 0xE4, 0xF5, 0x52, 0xF5, 0x53, 0xF5, -/*0050*/0x52, 0xF5, 0x7E, 0x7F, 0x04, 0x02, 0x04, 0x38, - 0xC2, 0x36, 0x05, 0x52, 0xE5, 0x52, 0xD3, 0x94, -/*0060*/0x0C, 0x40, 0x05, 0x75, 0x52, 0x01, 0xD2, 0x36, - 0x90, 0x07, 0x0C, 0x74, 0x07, 0xF0, 0xA3, 0x74, -/*0070*/0xFF, 0xF0, 0xE4, 0xF5, 0x0C, 0xA3, 0xF0, 0x90, - 0x07, 0x14, 0xF0, 0xA3, 0xF0, 0x75, 0x0B, 0x20, -/*0080*/0xF5, 0x09, 0xE4, 0xF5, 0x08, 0xE5, 0x08, 0xD3, - 0x94, 0x30, 0x40, 0x03, 0x02, 0x04, 0x04, 0x12, -/*0090*/0x00, 0x06, 0x15, 0x0B, 0xE5, 0x08, 0x70, 0x04, - 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x09, -/*00A0*/0x70, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, - 0xEE, 0x5F, 0x60, 0x05, 0x12, 0x18, 0x71, 0xD2, -/*00B0*/0x35, 0x53, 0xE1, 0xF7, 0xE5, 0x08, 0x45, 0x09, - 0xFF, 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24, -/*00C0*/0x83, 0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83, - 0xEF, 0xF0, 0x85, 0xE2, 0x20, 0xE5, 0x52, 0xD3, -/*00D0*/0x94, 0x01, 0x40, 0x0D, 0x12, 0x19, 0xF3, 0xE0, - 0x54, 0xA0, 0x64, 0x40, 0x70, 0x03, 0x02, 0x03, -/*00E0*/0xFB, 0x53, 0xF9, 0xF8, 0x90, 0x94, 0x70, 0xE4, - 0xF0, 0xE0, 0xF5, 0x10, 0xAF, 0x09, 0x12, 0x1E, -/*00F0*/0xB3, 0xAF, 0x08, 0xEF, 0x44, 0x08, 0xF5, 0x82, - 0x75, 0x83, 0x80, 0xE0, 0xF5, 0x29, 0xEF, 0x44, -/*0100*/0x07, 0x12, 0x1A, 0x3C, 0xF5, 0x22, 0x54, 0x40, - 0xD3, 0x94, 0x00, 0x40, 0x1E, 0xE5, 0x29, 0x54, -/*0110*/0xF0, 0x70, 0x21, 0x12, 0x19, 0xF3, 0xE0, 0x44, - 0x80, 0xF0, 0xE5, 0x22, 0x54, 0x30, 0x65, 0x08, -/*0120*/0x70, 0x09, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xBF, - 0xF0, 0x80, 0x09, 0x12, 0x19, 0xF3, 0x74, 0x40, -/*0130*/0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12, 0x75, - 0x83, 0xAE, 0x74, 0xFF, 0xF0, 0xAF, 0x08, 0x7E, -/*0140*/0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0xE0, 0xFD, - 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24, 0x81, -/*0150*/0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83, 0xED, - 0xF0, 0x90, 0x07, 0x0E, 0xE0, 0x04, 0xF0, 0xEF, -/*0160*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0x98, 0xE0, - 0xF5, 0x28, 0x12, 0x1A, 0x23, 0x40, 0x0C, 0x12, -/*0170*/0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12, 0x1A, 0x32, - 0x02, 0x03, 0xF6, 0xAF, 0x08, 0x7E, 0x00, 0x74, -/*0180*/0x80, 0xCD, 0xEF, 0xCD, 0x8D, 0x82, 0xF5, 0x83, - 0xE0, 0x30, 0xE0, 0x0A, 0x12, 0x19, 0xF3, 0xE0, -/*0190*/0x44, 0x20, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x19, - 0xF3, 0xE0, 0x54, 0xDF, 0xF0, 0xEE, 0x44, 0xAE, -/*01A0*/0x12, 0x1A, 0x43, 0x30, 0xE4, 0x03, 0x02, 0x03, - 0xFB, 0x74, 0x9E, 0x12, 0x1A, 0x05, 0x20, 0xE0, -/*01B0*/0x03, 0x02, 0x03, 0xFB, 0x8F, 0x82, 0x8E, 0x83, - 0xE0, 0x20, 0xE0, 0x03, 0x02, 0x03, 0xFB, 0x12, -/*01C0*/0x19, 0xF3, 0xE0, 0x44, 0x10, 0xF0, 0xE5, 0xE3, - 0x20, 0xE7, 0x08, 0xE5, 0x08, 0x12, 0x1A, 0x3A, -/*01D0*/0x44, 0x04, 0xF0, 0xAF, 0x08, 0x7E, 0x00, 0xEF, - 0x12, 0x1A, 0x3A, 0x20, 0xE2, 0x34, 0x12, 0x19, -/*01E0*/0xF3, 0xE0, 0x44, 0x08, 0xF0, 0xE5, 0xE4, 0x30, - 0xE6, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, -/*01F0*/0xE5, 0x7E, 0xC3, 0x94, 0x04, 0x50, 0x04, 0x7C, - 0x01, 0x80, 0x02, 0x7C, 0x00, 0xEC, 0x4D, 0x60, -/*0200*/0x05, 0xC2, 0x35, 0x02, 0x03, 0xFB, 0xEE, 0x44, - 0xD2, 0x12, 0x1A, 0x43, 0x44, 0x40, 0xF0, 0x02, -/*0210*/0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xF7, - 0xF0, 0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0, -/*0220*/0x54, 0xBF, 0xF0, 0x90, 0x07, 0x14, 0xE0, 0x04, - 0xF0, 0xE5, 0x7E, 0x70, 0x03, 0x75, 0x7E, 0x01, -/*0230*/0xAF, 0x08, 0x7E, 0x00, 0x12, 0x1A, 0x23, 0x40, - 0x12, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12, -/*0240*/0x19, 0xF2, 0xE0, 0x54, 0x02, 0x12, 0x1A, 0x32, - 0x02, 0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x44, -/*0250*/0x02, 0x12, 0x19, 0xF2, 0xE0, 0x54, 0xFE, 0xF0, - 0xC2, 0x35, 0xEE, 0x44, 0x8A, 0x8F, 0x82, 0xF5, -/*0260*/0x83, 0xE0, 0xF5, 0x17, 0x54, 0x8F, 0x44, 0x40, - 0xF0, 0x74, 0x90, 0xFC, 0xE5, 0x08, 0x44, 0x07, -/*0270*/0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0x54, 0x3F, - 0x90, 0x07, 0x02, 0xF0, 0xE0, 0x54, 0xC0, 0x8D, -/*0280*/0x82, 0x8C, 0x83, 0xF0, 0x74, 0x92, 0x12, 0x1A, - 0x05, 0x90, 0x07, 0x03, 0x12, 0x1A, 0x19, 0x74, -/*0290*/0x82, 0x12, 0x1A, 0x05, 0x90, 0x07, 0x04, 0x12, - 0x1A, 0x19, 0x74, 0xB4, 0x12, 0x1A, 0x05, 0x90, -/*02A0*/0x07, 0x05, 0x12, 0x1A, 0x19, 0x74, 0x94, 0xFE, - 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A, 0xF5, -/*02B0*/0x10, 0x30, 0xE0, 0x04, 0xD2, 0x37, 0x80, 0x02, - 0xC2, 0x37, 0xE5, 0x10, 0x54, 0x7F, 0x8F, 0x82, -/*02C0*/0x8E, 0x83, 0xF0, 0x30, 0x44, 0x30, 0x12, 0x1A, - 0x03, 0x54, 0x80, 0xD3, 0x94, 0x00, 0x40, 0x04, -/*02D0*/0xD2, 0x39, 0x80, 0x02, 0xC2, 0x39, 0x8F, 0x82, - 0x8E, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x12, 0x1A, -/*02E0*/0x03, 0x54, 0x40, 0xD3, 0x94, 0x00, 0x40, 0x04, - 0xD2, 0x3A, 0x80, 0x02, 0xC2, 0x3A, 0x8F, 0x82, -/*02F0*/0x8E, 0x83, 0xE0, 0x44, 0x40, 0xF0, 0x74, 0x92, - 0xFE, 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A, -/*0300*/0x30, 0xE7, 0x04, 0xD2, 0x38, 0x80, 0x02, 0xC2, - 0x38, 0x8F, 0x82, 0x8E, 0x83, 0xE0, 0x54, 0x7F, -/*0310*/0xF0, 0x12, 0x1E, 0x46, 0xE4, 0xF5, 0x0A, 0x20, - 0x03, 0x02, 0x80, 0x03, 0x30, 0x43, 0x03, 0x12, -/*0320*/0x19, 0x95, 0x20, 0x02, 0x02, 0x80, 0x03, 0x30, - 0x42, 0x03, 0x12, 0x0C, 0x8F, 0x30, 0x30, 0x06, -/*0330*/0x12, 0x19, 0x95, 0x12, 0x0C, 0x8F, 0x12, 0x0D, - 0x47, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xFB, 0xF0, -/*0340*/0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, 0x46, 0x43, - 0xE1, 0x08, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x04, -/*0350*/0xF0, 0xE5, 0xE4, 0x20, 0xE7, 0x2A, 0x12, 0x1A, - 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3, -/*0360*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, - 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, -/*0370*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, - 0x5E, 0x60, 0x05, 0x12, 0x1D, 0xD7, 0x80, 0x17, -/*0380*/0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x44, - 0x08, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12, -/*0390*/0x75, 0x83, 0xD2, 0xE0, 0x54, 0xF7, 0xF0, 0x12, - 0x1E, 0x46, 0x7F, 0x08, 0x12, 0x17, 0x31, 0x74, -/*03A0*/0x8E, 0xFE, 0x12, 0x1A, 0x12, 0x8E, 0x83, 0xE0, - 0xF5, 0x10, 0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44, -/*03B0*/0x01, 0xFF, 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07, - 0xF5, 0x82, 0xEF, 0xF0, 0xE5, 0x10, 0x54, 0xFE, -/*03C0*/0xFF, 0xED, 0x44, 0x07, 0xF5, 0x82, 0xEF, 0x12, - 0x1A, 0x11, 0x75, 0x83, 0x86, 0xE0, 0x44, 0x10, -/*03D0*/0x12, 0x1A, 0x11, 0xE0, 0x44, 0x10, 0xF0, 0x12, - 0x19, 0xF3, 0xE0, 0x54, 0xFD, 0x44, 0x01, 0xFF, -/*03E0*/0x12, 0x19, 0xF3, 0xEF, 0x12, 0x1A, 0x32, 0x30, - 0x32, 0x0C, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82, -/*03F0*/0x75, 0x83, 0x82, 0x74, 0x05, 0xF0, 0xAF, 0x0B, - 0x12, 0x18, 0xD7, 0x74, 0x10, 0x25, 0x08, 0xF5, -/*0400*/0x08, 0x02, 0x00, 0x85, 0x05, 0x09, 0xE5, 0x09, - 0xD3, 0x94, 0x07, 0x50, 0x03, 0x02, 0x00, 0x82, -/*0410*/0xE5, 0x7E, 0xD3, 0x94, 0x00, 0x40, 0x04, 0x7F, - 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x7E, 0xC3, -/*0420*/0x94, 0xFA, 0x50, 0x04, 0x7E, 0x01, 0x80, 0x02, - 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x02, 0x05, 0x7E, -/*0430*/0x30, 0x35, 0x0B, 0x43, 0xE1, 0x01, 0x7F, 0x09, - 0x12, 0x17, 0x31, 0x02, 0x00, 0x58, 0x53, 0xE1, -/*0440*/0xFE, 0x02, 0x00, 0x58, 0x8E, 0x6A, 0x8F, 0x6B, - 0x8C, 0x6C, 0x8D, 0x6D, 0x75, 0x6E, 0x01, 0x75, -/*0450*/0x6F, 0x01, 0x75, 0x70, 0x01, 0xE4, 0xF5, 0x73, - 0xF5, 0x74, 0xF5, 0x75, 0x90, 0x07, 0x2F, 0xF0, -/*0460*/0xF5, 0x3C, 0xF5, 0x3E, 0xF5, 0x46, 0xF5, 0x47, - 0xF5, 0x3D, 0xF5, 0x3F, 0xF5, 0x6F, 0xE5, 0x6F, -/*0470*/0x70, 0x0F, 0xE5, 0x6B, 0x45, 0x6A, 0x12, 0x07, - 0x2A, 0x75, 0x83, 0x80, 0x74, 0x3A, 0xF0, 0x80, -/*0480*/0x09, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74, - 0x1A, 0xF0, 0xE4, 0xF5, 0x6E, 0xC3, 0x74, 0x3F, -/*0490*/0x95, 0x6E, 0xFF, 0x12, 0x08, 0x65, 0x75, 0x83, - 0x82, 0xEF, 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x08, -/*04A0*/0xC6, 0xE5, 0x33, 0xF0, 0x12, 0x08, 0xFA, 0x12, - 0x08, 0xB1, 0x40, 0xE1, 0xE5, 0x6F, 0x70, 0x0B, -/*04B0*/0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74, 0x36, - 0xF0, 0x80, 0x09, 0x12, 0x07, 0x2A, 0x75, 0x83, -/*04C0*/0x80, 0x74, 0x16, 0xF0, 0x75, 0x6E, 0x01, 0x12, - 0x07, 0x2A, 0x75, 0x83, 0xB4, 0xE5, 0x6E, 0xF0, -/*04D0*/0x12, 0x1A, 0x4D, 0x74, 0x3F, 0x25, 0x6E, 0xF5, - 0x82, 0xE4, 0x34, 0x00, 0xF5, 0x83, 0xE5, 0x33, -/*04E0*/0xF0, 0x74, 0xBF, 0x25, 0x6E, 0xF5, 0x82, 0xE4, - 0x34, 0x00, 0x12, 0x08, 0xB1, 0x40, 0xD8, 0xE4, -/*04F0*/0xF5, 0x70, 0xF5, 0x46, 0xF5, 0x47, 0xF5, 0x6E, - 0x12, 0x08, 0xFA, 0xF5, 0x83, 0xE0, 0xFE, 0x12, -/*0500*/0x08, 0xC6, 0xE0, 0x7C, 0x00, 0x24, 0x00, 0xFF, - 0xEC, 0x3E, 0xFE, 0xAD, 0x3B, 0xD3, 0xEF, 0x9D, -/*0510*/0xEE, 0x9C, 0x50, 0x04, 0x7B, 0x01, 0x80, 0x02, - 0x7B, 0x00, 0xE5, 0x70, 0x70, 0x04, 0x7A, 0x01, -/*0520*/0x80, 0x02, 0x7A, 0x00, 0xEB, 0x5A, 0x60, 0x06, - 0x85, 0x6E, 0x46, 0x75, 0x70, 0x01, 0xD3, 0xEF, -/*0530*/0x9D, 0xEE, 0x9C, 0x50, 0x04, 0x7F, 0x01, 0x80, - 0x02, 0x7F, 0x00, 0xE5, 0x70, 0xB4, 0x01, 0x04, -/*0540*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, 0x5E, - 0x60, 0x03, 0x85, 0x6E, 0x47, 0x05, 0x6E, 0xE5, -/*0550*/0x6E, 0x64, 0x7F, 0x70, 0xA3, 0xE5, 0x46, 0x60, - 0x05, 0xE5, 0x47, 0xB4, 0x7E, 0x03, 0x85, 0x46, -/*0560*/0x47, 0xE5, 0x6F, 0x70, 0x08, 0x85, 0x46, 0x76, - 0x85, 0x47, 0x77, 0x80, 0x0E, 0xC3, 0x74, 0x7F, -/*0570*/0x95, 0x46, 0xF5, 0x78, 0xC3, 0x74, 0x7F, 0x95, - 0x47, 0xF5, 0x79, 0xE5, 0x6F, 0x70, 0x37, 0xE5, -/*0580*/0x46, 0x65, 0x47, 0x70, 0x0C, 0x75, 0x73, 0x01, - 0x75, 0x74, 0x01, 0xF5, 0x3C, 0xF5, 0x3D, 0x80, -/*0590*/0x35, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5, 0x47, 0x95, - 0x46, 0xF5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25, -/*05A0*/0x46, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05, - 0xE4, 0xF5, 0x3D, 0x80, 0x40, 0xC3, 0x74, 0x3F, -/*05B0*/0x95, 0x72, 0xF5, 0x3D, 0x80, 0x37, 0xE5, 0x46, - 0x65, 0x47, 0x70, 0x0F, 0x75, 0x73, 0x01, 0x75, -/*05C0*/0x75, 0x01, 0xF5, 0x3E, 0xF5, 0x3F, 0x75, 0x4E, - 0x01, 0x80, 0x22, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5, -/*05D0*/0x47, 0x95, 0x46, 0xF5, 0x3E, 0xC3, 0x13, 0xF5, - 0x71, 0x25, 0x46, 0xF5, 0x72, 0xD3, 0x94, 0x3F, -/*05E0*/0x50, 0x05, 0xE4, 0xF5, 0x3F, 0x80, 0x06, 0xE5, - 0x72, 0x24, 0xC1, 0xF5, 0x3F, 0x05, 0x6F, 0xE5, -/*05F0*/0x6F, 0xC3, 0x94, 0x02, 0x50, 0x03, 0x02, 0x04, - 0x6E, 0xE5, 0x6D, 0x45, 0x6C, 0x70, 0x02, 0x80, -/*0600*/0x04, 0xE5, 0x74, 0x45, 0x75, 0x90, 0x07, 0x2F, - 0xF0, 0x7F, 0x01, 0xE5, 0x3E, 0x60, 0x04, 0xE5, -/*0610*/0x3C, 0x70, 0x14, 0xE4, 0xF5, 0x3C, 0xF5, 0x3D, - 0xF5, 0x3E, 0xF5, 0x3F, 0x12, 0x08, 0xD2, 0x70, -/*0620*/0x04, 0xF0, 0x02, 0x06, 0xA4, 0x80, 0x7A, 0xE5, - 0x3C, 0xC3, 0x95, 0x3E, 0x40, 0x07, 0xE5, 0x3C, -/*0630*/0x95, 0x3E, 0xFF, 0x80, 0x06, 0xC3, 0xE5, 0x3E, - 0x95, 0x3C, 0xFF, 0xE5, 0x76, 0xD3, 0x95, 0x79, -/*0640*/0x40, 0x05, 0x85, 0x76, 0x7A, 0x80, 0x03, 0x85, - 0x79, 0x7A, 0xE5, 0x77, 0xC3, 0x95, 0x78, 0x50, -/*0650*/0x05, 0x85, 0x77, 0x7B, 0x80, 0x03, 0x85, 0x78, - 0x7B, 0xE5, 0x7B, 0xD3, 0x95, 0x7A, 0x40, 0x30, -/*0660*/0xE5, 0x7B, 0x95, 0x7A, 0xF5, 0x3C, 0xF5, 0x3E, - 0xC3, 0xE5, 0x7B, 0x95, 0x7A, 0x90, 0x07, 0x19, -/*0670*/0xF0, 0xE5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25, - 0x7A, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05, -/*0680*/0xE4, 0xF5, 0x3D, 0x80, 0x1F, 0xC3, 0x74, 0x3F, - 0x95, 0x72, 0xF5, 0x3D, 0xF5, 0x3F, 0x80, 0x14, -/*0690*/0xE4, 0xF5, 0x3C, 0xF5, 0x3E, 0x90, 0x07, 0x19, - 0xF0, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80, -/*06A0*/0x03, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x65, 0x75, - 0x83, 0xD0, 0xE0, 0x54, 0x0F, 0xFE, 0xAD, 0x3C, -/*06B0*/0x70, 0x02, 0x7E, 0x07, 0xBE, 0x0F, 0x02, 0x7E, - 0x80, 0xEE, 0xFB, 0xEF, 0xD3, 0x9B, 0x74, 0x80, -/*06C0*/0xF8, 0x98, 0x40, 0x1F, 0xE4, 0xF5, 0x3C, 0xF5, - 0x3E, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80, -/*06D0*/0x12, 0x74, 0x01, 0xF0, 0xE5, 0x08, 0xFB, 0xEB, - 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xD2, 0xE0, -/*06E0*/0x44, 0x10, 0xF0, 0xE5, 0x08, 0xFB, 0xEB, 0x44, - 0x09, 0xF5, 0x82, 0x75, 0x83, 0x9E, 0xED, 0xF0, -/*06F0*/0xEB, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xCA, - 0xED, 0xF0, 0x12, 0x08, 0x65, 0x75, 0x83, 0xCC, -/*0700*/0xEF, 0xF0, 0x22, 0xE5, 0x08, 0x44, 0x07, 0xF5, - 0x82, 0x75, 0x83, 0xBC, 0xE0, 0x54, 0xF0, 0xF0, -/*0710*/0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, - 0xBE, 0xE0, 0x54, 0xF0, 0xF0, 0xE5, 0x08, 0x44, -/*0720*/0x07, 0xF5, 0x82, 0x75, 0x83, 0xC0, 0xE0, 0x54, - 0xF0, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, -/*0730*/0x22, 0xF0, 0x90, 0x07, 0x28, 0xE0, 0xFE, 0xA3, - 0xE0, 0xF5, 0x82, 0x8E, 0x83, 0x22, 0x85, 0x42, -/*0740*/0x42, 0x85, 0x41, 0x41, 0x85, 0x40, 0x40, 0x74, - 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E, 0xF5, -/*0750*/0x83, 0xE5, 0x42, 0xF0, 0x74, 0xE0, 0x2F, 0xF5, - 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xE5, -/*0760*/0x42, 0x29, 0xFD, 0xE4, 0x33, 0xFC, 0xE5, 0x3C, - 0xC3, 0x9D, 0xEC, 0x64, 0x80, 0xF8, 0x74, 0x80, -/*0770*/0x98, 0x22, 0xF5, 0x83, 0xE0, 0x90, 0x07, 0x22, - 0x54, 0x1F, 0xFD, 0xE0, 0xFA, 0xA3, 0xE0, 0xF5, -/*0780*/0x82, 0x8A, 0x83, 0xED, 0xF0, 0x22, 0x90, 0x07, - 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xF5, 0x82, 0x8C, -/*0790*/0x83, 0x22, 0x90, 0x07, 0x24, 0xFF, 0xED, 0x44, - 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22, 0x85, -/*07A0*/0x38, 0x38, 0x85, 0x39, 0x39, 0x85, 0x3A, 0x3A, - 0x74, 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E, -/*07B0*/0xF5, 0x83, 0x22, 0x90, 0x07, 0x26, 0xFF, 0xED, - 0x44, 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22, -/*07C0*/0xF0, 0x74, 0xA0, 0x2F, 0xF5, 0x82, 0x74, 0x02, - 0x3E, 0xF5, 0x83, 0x22, 0x74, 0xC0, 0x25, 0x11, -/*07D0*/0xF5, 0x82, 0xE4, 0x34, 0x01, 0xF5, 0x83, 0x22, - 0x74, 0x00, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34, -/*07E0*/0x02, 0xF5, 0x83, 0x22, 0x74, 0x60, 0x25, 0x11, - 0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22, -/*07F0*/0x74, 0x80, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34, - 0x03, 0xF5, 0x83, 0x22, 0x74, 0xE0, 0x25, 0x11, -/*0800*/0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22, - 0x74, 0x40, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34, -/*0810*/0x06, 0xF5, 0x83, 0x22, 0x74, 0x80, 0x2F, 0xF5, - 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xAF, -/*0820*/0x08, 0x7E, 0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82, - 0x22, 0xF5, 0x83, 0xE5, 0x82, 0x44, 0x07, 0xF5, -/*0830*/0x82, 0xE5, 0x40, 0xF0, 0x22, 0x74, 0x40, 0x25, - 0x11, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83, -/*0840*/0x22, 0x74, 0xC0, 0x25, 0x11, 0xF5, 0x82, 0xE4, - 0x34, 0x03, 0xF5, 0x83, 0x22, 0x74, 0x00, 0x25, -/*0850*/0x11, 0xF5, 0x82, 0xE4, 0x34, 0x06, 0xF5, 0x83, - 0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4, -/*0860*/0x34, 0x06, 0xF5, 0x83, 0x22, 0xE5, 0x08, 0xFD, - 0xED, 0x44, 0x07, 0xF5, 0x82, 0x22, 0xE5, 0x41, -/*0870*/0xF0, 0xE5, 0x65, 0x64, 0x01, 0x45, 0x64, 0x22, - 0x7E, 0x00, 0xFB, 0x7A, 0x00, 0xFD, 0x7C, 0x00, -/*0880*/0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4, - 0x34, 0x02, 0x22, 0x74, 0xA0, 0x25, 0x11, 0xF5, -/*0890*/0x82, 0xE4, 0x34, 0x03, 0x22, 0x85, 0x3E, 0x42, - 0x85, 0x3F, 0x41, 0x8F, 0x40, 0x22, 0x85, 0x3C, -/*08A0*/0x42, 0x85, 0x3D, 0x41, 0x8F, 0x40, 0x22, 0x75, - 0x45, 0x3F, 0x90, 0x07, 0x20, 0xE4, 0xF0, 0xA3, -/*08B0*/0x22, 0xF5, 0x83, 0xE5, 0x32, 0xF0, 0x05, 0x6E, - 0xE5, 0x6E, 0xC3, 0x94, 0x40, 0x22, 0xF0, 0xE5, -/*08C0*/0x08, 0x44, 0x06, 0xF5, 0x82, 0x22, 0x74, 0x00, - 0x25, 0x6E, 0xF5, 0x82, 0xE4, 0x34, 0x00, 0xF5, -/*08D0*/0x83, 0x22, 0xE5, 0x6D, 0x45, 0x6C, 0x90, 0x07, - 0x2F, 0x22, 0xE4, 0xF9, 0xE5, 0x3C, 0xD3, 0x95, -/*08E0*/0x3E, 0x22, 0x74, 0x80, 0x2E, 0xF5, 0x82, 0xE4, - 0x34, 0x02, 0xF5, 0x83, 0xE0, 0x22, 0x74, 0xA0, -/*08F0*/0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83, - 0xE0, 0x22, 0x74, 0x80, 0x25, 0x6E, 0xF5, 0x82, -/*0900*/0xE4, 0x34, 0x00, 0x22, 0x25, 0x42, 0xFD, 0xE4, - 0x33, 0xFC, 0x22, 0x85, 0x42, 0x42, 0x85, 0x41, -/*0910*/0x41, 0x85, 0x40, 0x40, 0x22, 0xED, 0x4C, 0x60, - 0x03, 0x02, 0x09, 0xE5, 0xEF, 0x4E, 0x70, 0x37, -/*0920*/0x90, 0x07, 0x26, 0x12, 0x07, 0x89, 0xE0, 0xFD, - 0x12, 0x07, 0xCC, 0xED, 0xF0, 0x90, 0x07, 0x28, -/*0930*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xD8, - 0xED, 0xF0, 0x12, 0x07, 0x86, 0xE0, 0x54, 0x1F, -/*0940*/0xFD, 0x12, 0x08, 0x81, 0xF5, 0x83, 0xED, 0xF0, - 0x90, 0x07, 0x24, 0x12, 0x07, 0x89, 0xE0, 0x54, -/*0950*/0x1F, 0xFD, 0x12, 0x08, 0x35, 0xED, 0xF0, 0xEF, - 0x64, 0x04, 0x4E, 0x70, 0x37, 0x90, 0x07, 0x26, -/*0960*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xE4, - 0xED, 0xF0, 0x90, 0x07, 0x28, 0x12, 0x07, 0x89, -/*0970*/0xE0, 0xFD, 0x12, 0x07, 0xF0, 0xED, 0xF0, 0x12, - 0x07, 0x86, 0xE0, 0x54, 0x1F, 0xFD, 0x12, 0x08, -/*0980*/0x8B, 0xF5, 0x83, 0xED, 0xF0, 0x90, 0x07, 0x24, - 0x12, 0x07, 0x89, 0xE0, 0x54, 0x1F, 0xFD, 0x12, -/*0990*/0x08, 0x41, 0xED, 0xF0, 0xEF, 0x64, 0x01, 0x4E, - 0x70, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, -/*09A0*/0xEF, 0x64, 0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01, - 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x78, -/*09B0*/0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE0, 0xFF, - 0x12, 0x07, 0xFC, 0xEF, 0x12, 0x07, 0x31, 0xE0, -/*09C0*/0xFF, 0x12, 0x08, 0x08, 0xEF, 0xF0, 0x90, 0x07, - 0x22, 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF, -/*09D0*/0x12, 0x08, 0x4D, 0xEF, 0xF0, 0x90, 0x07, 0x24, - 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF, 0x12, -/*09E0*/0x08, 0x59, 0xEF, 0xF0, 0x22, 0x12, 0x07, 0xCC, - 0xE4, 0xF0, 0x12, 0x07, 0xD8, 0xE4, 0xF0, 0x12, -/*09F0*/0x08, 0x81, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08, - 0x35, 0x74, 0x14, 0xF0, 0x12, 0x07, 0xE4, 0xE4, -/*0A00*/0xF0, 0x12, 0x07, 0xF0, 0xE4, 0xF0, 0x12, 0x08, - 0x8B, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08, 0x41, -/*0A10*/0x74, 0x14, 0xF0, 0x12, 0x07, 0xFC, 0xE4, 0xF0, - 0x12, 0x08, 0x08, 0xE4, 0xF0, 0x12, 0x08, 0x4D, -/*0A20*/0xE4, 0xF0, 0x12, 0x08, 0x59, 0x74, 0x14, 0xF0, - 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFC, 0x10, 0xE4, -/*0A30*/0xF5, 0xFD, 0x75, 0xFE, 0x30, 0xF5, 0xFF, 0xE5, - 0xE7, 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0xE5, -/*0A40*/0xE6, 0x20, 0xE7, 0x0B, 0x78, 0xFF, 0xE4, 0xF6, - 0xD8, 0xFD, 0x53, 0xE6, 0xFE, 0x80, 0x09, 0x78, -/*0A50*/0x08, 0xE4, 0xF6, 0xD8, 0xFD, 0x53, 0xE6, 0xFE, - 0x75, 0x81, 0x80, 0xE4, 0xF5, 0xA8, 0xD2, 0xA8, -/*0A60*/0xC2, 0xA9, 0xD2, 0xAF, 0xE5, 0xE2, 0x20, 0xE5, - 0x05, 0x20, 0xE6, 0x02, 0x80, 0x03, 0x43, 0xE1, -/*0A70*/0x02, 0xE5, 0xE2, 0x20, 0xE0, 0x0E, 0x90, 0x00, - 0x00, 0x7F, 0x00, 0x7E, 0x08, 0xE4, 0xF0, 0xA3, -/*0A80*/0xDF, 0xFC, 0xDE, 0xFA, 0x02, 0x0A, 0xDB, 0x43, - 0xFA, 0x01, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, -/*0A90*/0xC0, 0x82, 0xC0, 0xD0, 0x12, 0x1C, 0xE7, 0xD0, - 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, -/*0AA0*/0xE0, 0x53, 0xFA, 0xFE, 0x32, 0x02, 0x1B, 0x55, - 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xF6, -/*0AB0*/0x08, 0xDF, 0xF9, 0x80, 0x29, 0xE4, 0x93, 0xA3, - 0xF8, 0x54, 0x07, 0x24, 0x0C, 0xC8, 0xC3, 0x33, -/*0AC0*/0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40, - 0x04, 0xF4, 0x56, 0x80, 0x01, 0x46, 0xF6, 0xDF, -/*0AD0*/0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10, - 0x20, 0x40, 0x80, 0x90, 0x00, 0x3F, 0xE4, 0x7E, -/*0AE0*/0x01, 0x93, 0x60, 0xC1, 0xA3, 0xFF, 0x54, 0x3F, - 0x30, 0xE5, 0x09, 0x54, 0x1F, 0xFE, 0xE4, 0x93, -/*0AF0*/0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25, - 0xE0, 0x60, 0xAD, 0x40, 0xB8, 0x80, 0xFE, 0x8C, -/*0B00*/0x64, 0x8D, 0x65, 0x8A, 0x66, 0x8B, 0x67, 0xE4, - 0xF5, 0x69, 0xEF, 0x4E, 0x70, 0x03, 0x02, 0x1D, -/*0B10*/0x55, 0xE4, 0xF5, 0x68, 0xE5, 0x67, 0x45, 0x66, - 0x70, 0x32, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90, -/*0B20*/0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE4, - 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4, 0x12, -/*0B30*/0x08, 0x70, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75, - 0x83, 0x92, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, -/*0B40*/0xC6, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8, - 0xE4, 0xF0, 0x80, 0x11, 0x90, 0x07, 0x26, 0x12, -/*0B50*/0x07, 0x35, 0xE4, 0x12, 0x08, 0x70, 0x70, 0x05, - 0x12, 0x07, 0x32, 0xE4, 0xF0, 0x12, 0x1D, 0x55, -/*0B60*/0x12, 0x1E, 0xBF, 0xE5, 0x67, 0x45, 0x66, 0x70, - 0x33, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90, 0xE5, -/*0B70*/0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5, - 0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x12, -/*0B80*/0x08, 0x6E, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75, - 0x83, 0x92, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75, -/*0B90*/0x83, 0xC6, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75, - 0x83, 0xC8, 0x80, 0x0E, 0x90, 0x07, 0x26, 0x12, -/*0BA0*/0x07, 0x35, 0x12, 0x08, 0x6E, 0x70, 0x06, 0x12, - 0x07, 0x32, 0xE5, 0x40, 0xF0, 0xAF, 0x69, 0x7E, -/*0BB0*/0x00, 0xAD, 0x67, 0xAC, 0x66, 0x12, 0x04, 0x44, - 0x12, 0x07, 0x2A, 0x75, 0x83, 0xCA, 0xE0, 0xD3, -/*0BC0*/0x94, 0x00, 0x50, 0x0C, 0x05, 0x68, 0xE5, 0x68, - 0xC3, 0x94, 0x05, 0x50, 0x03, 0x02, 0x0B, 0x14, -/*0BD0*/0x22, 0x8C, 0x60, 0x8D, 0x61, 0x12, 0x08, 0xDA, - 0x74, 0x20, 0x40, 0x0D, 0x2F, 0xF5, 0x82, 0x74, -/*0BE0*/0x03, 0x3E, 0xF5, 0x83, 0xE5, 0x3E, 0xF0, 0x80, - 0x0B, 0x2F, 0xF5, 0x82, 0x74, 0x03, 0x3E, 0xF5, -/*0BF0*/0x83, 0xE5, 0x3C, 0xF0, 0xE5, 0x3C, 0xD3, 0x95, - 0x3E, 0x40, 0x3C, 0xE5, 0x61, 0x45, 0x60, 0x70, -/*0C00*/0x10, 0xE9, 0x12, 0x09, 0x04, 0xE5, 0x3E, 0x12, - 0x07, 0x68, 0x40, 0x3B, 0x12, 0x08, 0x95, 0x80, -/*0C10*/0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40, 0x1D, - 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05, 0x85, -/*0C20*/0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F, - 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x3E, 0x12, 0x07, -/*0C30*/0xC0, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x43, 0xE5, - 0x61, 0x45, 0x60, 0x70, 0x19, 0x12, 0x07, 0x5F, -/*0C40*/0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x27, 0x12, - 0x09, 0x0B, 0x12, 0x08, 0x14, 0xE5, 0x42, 0x12, -/*0C50*/0x07, 0xC0, 0xE5, 0x41, 0xF0, 0x22, 0xE5, 0x3C, - 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C, 0x38, -/*0C60*/0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39, 0x80, - 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x08, -/*0C70*/0x14, 0xE5, 0x3C, 0x12, 0x07, 0xC0, 0xE5, 0x3D, - 0xF0, 0x22, 0x85, 0x38, 0x38, 0x85, 0x39, 0x39, -/*0C80*/0x85, 0x3A, 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x38, - 0x12, 0x07, 0xC0, 0xE5, 0x39, 0xF0, 0x22, 0x7F, -/*0C90*/0x06, 0x12, 0x17, 0x31, 0x12, 0x1D, 0x23, 0x12, - 0x0E, 0x04, 0x12, 0x0E, 0x33, 0xE0, 0x44, 0x0A, -/*0CA0*/0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E, 0x04, 0x12, - 0x0E, 0x0B, 0xEF, 0xF0, 0xE5, 0x28, 0x30, 0xE5, -/*0CB0*/0x03, 0xD3, 0x80, 0x01, 0xC3, 0x40, 0x05, 0x75, - 0x14, 0x20, 0x80, 0x03, 0x75, 0x14, 0x08, 0x12, -/*0CC0*/0x0E, 0x04, 0x75, 0x83, 0x8A, 0xE5, 0x14, 0xF0, - 0xB4, 0xFF, 0x05, 0x75, 0x12, 0x80, 0x80, 0x06, -/*0CD0*/0xE5, 0x14, 0xC3, 0x13, 0xF5, 0x12, 0xE4, 0xF5, - 0x16, 0xF5, 0x7F, 0x12, 0x19, 0x36, 0x12, 0x13, -/*0CE0*/0xA3, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x50, 0x09, - 0x05, 0x16, 0xE5, 0x16, 0xC3, 0x94, 0x14, 0x40, -/*0CF0*/0xEA, 0xE5, 0xE4, 0x20, 0xE7, 0x28, 0x12, 0x0E, - 0x04, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3, -/*0D00*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, - 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, -/*0D10*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, - 0x5E, 0x60, 0x03, 0x12, 0x1D, 0xD7, 0xE5, 0x7F, -/*0D20*/0xC3, 0x94, 0x11, 0x40, 0x14, 0x12, 0x0E, 0x04, - 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x80, 0xF0, 0xE5, -/*0D30*/0xE4, 0x20, 0xE7, 0x0F, 0x12, 0x1D, 0xD7, 0x80, - 0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0xD2, 0xE0, -/*0D40*/0x54, 0x7F, 0xF0, 0x12, 0x1D, 0x23, 0x22, 0x74, - 0x8A, 0x85, 0x08, 0x82, 0xF5, 0x83, 0xE5, 0x17, -/*0D50*/0xF0, 0x12, 0x0E, 0x3A, 0xE4, 0xF0, 0x90, 0x07, - 0x02, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x90, -/*0D60*/0xEF, 0xF0, 0x74, 0x92, 0xFE, 0xE5, 0x08, 0x44, - 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x54, -/*0D70*/0xC0, 0xFD, 0x90, 0x07, 0x03, 0xE0, 0x54, 0x3F, - 0x4D, 0x8F, 0x82, 0x8E, 0x83, 0xF0, 0x90, 0x07, -/*0D80*/0x04, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x82, - 0xEF, 0xF0, 0x90, 0x07, 0x05, 0xE0, 0xFF, 0xED, -/*0D90*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xB4, 0xEF, - 0x12, 0x0E, 0x03, 0x75, 0x83, 0x80, 0xE0, 0x54, -/*0DA0*/0xBF, 0xF0, 0x30, 0x37, 0x0A, 0x12, 0x0E, 0x91, - 0x75, 0x83, 0x94, 0xE0, 0x44, 0x80, 0xF0, 0x30, -/*0DB0*/0x38, 0x0A, 0x12, 0x0E, 0x91, 0x75, 0x83, 0x92, - 0xE0, 0x44, 0x80, 0xF0, 0xE5, 0x28, 0x30, 0xE4, -/*0DC0*/0x1A, 0x20, 0x39, 0x0A, 0x12, 0x0E, 0x04, 0x75, - 0x83, 0x88, 0xE0, 0x54, 0x7F, 0xF0, 0x20, 0x3A, -/*0DD0*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x88, 0xE0, - 0x54, 0xBF, 0xF0, 0x74, 0x8C, 0xFE, 0x12, 0x0E, -/*0DE0*/0x04, 0x8E, 0x83, 0xE0, 0x54, 0x0F, 0x12, 0x0E, - 0x03, 0x75, 0x83, 0x86, 0xE0, 0x54, 0xBF, 0xF0, -/*0DF0*/0xE5, 0x08, 0x44, 0x06, 0x12, 0x0D, 0xFD, 0x75, - 0x83, 0x8A, 0xE4, 0xF0, 0x22, 0xF5, 0x82, 0x75, -/*0E00*/0x83, 0x82, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07, - 0xF5, 0x82, 0x22, 0x8E, 0x83, 0xE0, 0xF5, 0x10, -/*0E10*/0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44, 0x01, 0xFF, - 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07, 0xF5, 0x82, -/*0E20*/0x22, 0xE5, 0x15, 0xC4, 0x54, 0x07, 0xFF, 0xE5, - 0x08, 0xFD, 0xED, 0x44, 0x08, 0xF5, 0x82, 0x75, -/*0E30*/0x83, 0x82, 0x22, 0x75, 0x83, 0x80, 0xE0, 0x44, - 0x40, 0xF0, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82, -/*0E40*/0x75, 0x83, 0x8A, 0x22, 0xE5, 0x16, 0x25, 0xE0, - 0x25, 0xE0, 0x24, 0xAF, 0xF5, 0x82, 0xE4, 0x34, -/*0E50*/0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0D, 0x22, - 0x43, 0xE1, 0x10, 0x43, 0xE1, 0x80, 0x53, 0xE1, -/*0E60*/0xFD, 0x85, 0xE1, 0x10, 0x22, 0xE5, 0x16, 0x25, - 0xE0, 0x25, 0xE0, 0x24, 0xB2, 0xF5, 0x82, 0xE4, -/*0E70*/0x34, 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0x85, - 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15, 0xF0, -/*0E80*/0x22, 0xE5, 0xE2, 0x54, 0x20, 0xD3, 0x94, 0x00, - 0x22, 0xE5, 0xE2, 0x54, 0x40, 0xD3, 0x94, 0x00, -/*0E90*/0x22, 0xE5, 0x08, 0x44, 0x06, 0xF5, 0x82, 0x22, - 0xFD, 0xE5, 0x08, 0xFB, 0xEB, 0x44, 0x07, 0xF5, -/*0EA0*/0x82, 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFE, 0x30, - 0x22, 0xEF, 0x4E, 0x70, 0x26, 0x12, 0x07, 0xCC, -/*0EB0*/0xE0, 0xFD, 0x90, 0x07, 0x26, 0x12, 0x07, 0x7B, - 0x12, 0x07, 0xD8, 0xE0, 0xFD, 0x90, 0x07, 0x28, -/*0EC0*/0x12, 0x07, 0x7B, 0x12, 0x08, 0x81, 0x12, 0x07, - 0x72, 0x12, 0x08, 0x35, 0xE0, 0x90, 0x07, 0x24, -/*0ED0*/0x12, 0x07, 0x78, 0xEF, 0x64, 0x04, 0x4E, 0x70, - 0x29, 0x12, 0x07, 0xE4, 0xE0, 0xFD, 0x90, 0x07, -/*0EE0*/0x26, 0x12, 0x07, 0x7B, 0x12, 0x07, 0xF0, 0xE0, - 0xFD, 0x90, 0x07, 0x28, 0x12, 0x07, 0x7B, 0x12, -/*0EF0*/0x08, 0x8B, 0x12, 0x07, 0x72, 0x12, 0x08, 0x41, - 0xE0, 0x54, 0x1F, 0xFD, 0x90, 0x07, 0x24, 0x12, -/*0F00*/0x07, 0x7B, 0xEF, 0x64, 0x01, 0x4E, 0x70, 0x04, - 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0xEF, 0x64, -/*0F10*/0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02, - 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x35, 0x12, 0x07, -/*0F20*/0xFC, 0xE0, 0xFF, 0x90, 0x07, 0x26, 0x12, 0x07, - 0x89, 0xEF, 0xF0, 0x12, 0x08, 0x08, 0xE0, 0xFF, -/*0F30*/0x90, 0x07, 0x28, 0x12, 0x07, 0x89, 0xEF, 0xF0, - 0x12, 0x08, 0x4D, 0xE0, 0x54, 0x1F, 0xFF, 0x12, -/*0F40*/0x07, 0x86, 0xEF, 0xF0, 0x12, 0x08, 0x59, 0xE0, - 0x54, 0x1F, 0xFF, 0x90, 0x07, 0x24, 0x12, 0x07, -/*0F50*/0x89, 0xEF, 0xF0, 0x22, 0xE4, 0xF5, 0x53, 0x12, - 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, -/*0F60*/0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40, 0x04, 0x7E, - 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x70, -/*0F70*/0x03, 0x02, 0x0F, 0xF6, 0x85, 0xE1, 0x10, 0x43, - 0xE1, 0x02, 0x53, 0xE1, 0x0F, 0x85, 0xE1, 0x10, -/*0F80*/0xE4, 0xF5, 0x51, 0xE5, 0xE3, 0x54, 0x3F, 0xF5, - 0x52, 0x12, 0x0E, 0x89, 0x40, 0x1D, 0xAD, 0x52, -/*0F90*/0xAF, 0x51, 0x12, 0x11, 0x18, 0xEF, 0x60, 0x08, - 0x85, 0xE1, 0x10, 0x43, 0xE1, 0x40, 0x80, 0x0B, -/*0FA0*/0x53, 0xE1, 0xBF, 0x12, 0x0E, 0x58, 0x12, 0x00, - 0x06, 0x80, 0xFB, 0xE5, 0xE3, 0x54, 0x3F, 0xF5, -/*0FB0*/0x51, 0xE5, 0xE4, 0x54, 0x3F, 0xF5, 0x52, 0x12, - 0x0E, 0x81, 0x40, 0x1D, 0xAD, 0x52, 0xAF, 0x51, -/*0FC0*/0x12, 0x11, 0x18, 0xEF, 0x60, 0x08, 0x85, 0xE1, - 0x10, 0x43, 0xE1, 0x20, 0x80, 0x0B, 0x53, 0xE1, -/*0FD0*/0xDF, 0x12, 0x0E, 0x58, 0x12, 0x00, 0x06, 0x80, - 0xFB, 0x12, 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01, -/*0FE0*/0x80, 0x02, 0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40, - 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, -/*0FF0*/0x4F, 0x60, 0x03, 0x12, 0x0E, 0x5B, 0x22, 0x12, - 0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x22, -/*1000*/0x02, 0x11, 0x00, 0x02, 0x10, 0x40, 0x02, 0x10, - 0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1010*/0x01, 0x20, 0x01, 0x20, 0xE4, 0xF5, 0x57, 0x12, - 0x16, 0xBD, 0x12, 0x16, 0x44, 0xE4, 0x12, 0x10, -/*1020*/0x56, 0x12, 0x14, 0xB7, 0x90, 0x07, 0x26, 0x12, - 0x07, 0x35, 0xE4, 0x12, 0x07, 0x31, 0xE4, 0xF0, -/*1030*/0x12, 0x10, 0x56, 0x12, 0x14, 0xB7, 0x90, 0x07, - 0x26, 0x12, 0x07, 0x35, 0xE5, 0x41, 0x12, 0x07, -/*1040*/0x31, 0xE5, 0x40, 0xF0, 0xAF, 0x57, 0x7E, 0x00, - 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF, -/*1050*/0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xFF, 0x90, - 0x07, 0x20, 0xA3, 0xE0, 0xFD, 0xE4, 0xF5, 0x56, -/*1060*/0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x12, - 0x11, 0x51, 0x7F, 0x0F, 0x7D, 0x18, 0xE4, 0xF5, -/*1070*/0x56, 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, - 0x12, 0x15, 0x41, 0xAF, 0x56, 0x7E, 0x00, 0x12, -/*1080*/0x1A, 0xFF, 0xE4, 0xFF, 0xF5, 0x56, 0x7D, 0x1F, - 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x22, -/*1090*/0x22, 0xE4, 0xF5, 0x55, 0xE5, 0x08, 0xFD, 0x74, - 0xA0, 0xF5, 0x56, 0xED, 0x44, 0x07, 0xF5, 0x57, -/*10A0*/0xE5, 0x28, 0x30, 0xE5, 0x03, 0xD3, 0x80, 0x01, - 0xC3, 0x40, 0x05, 0x7F, 0x28, 0xEF, 0x80, 0x04, -/*10B0*/0x7F, 0x14, 0xEF, 0xC3, 0x13, 0xF5, 0x54, 0xE4, - 0xF9, 0x12, 0x0E, 0x18, 0x75, 0x83, 0x8E, 0xE0, -/*10C0*/0xF5, 0x10, 0xCE, 0xEF, 0xCE, 0xEE, 0xD3, 0x94, - 0x00, 0x40, 0x26, 0xE5, 0x10, 0x54, 0xFE, 0x12, -/*10D0*/0x0E, 0x98, 0x75, 0x83, 0x8E, 0xED, 0xF0, 0xE5, - 0x10, 0x44, 0x01, 0xFD, 0xEB, 0x44, 0x07, 0xF5, -/*10E0*/0x82, 0xED, 0xF0, 0x85, 0x57, 0x82, 0x85, 0x56, - 0x83, 0xE0, 0x30, 0xE3, 0x01, 0x09, 0x1E, 0x80, -/*10F0*/0xD4, 0xC2, 0x34, 0xE9, 0xC3, 0x95, 0x54, 0x40, - 0x02, 0xD2, 0x34, 0x22, 0x02, 0x00, 0x06, 0x22, -/*1100*/0x30, 0x30, 0x11, 0x90, 0x10, 0x00, 0xE4, 0x93, - 0xF5, 0x10, 0x90, 0x10, 0x10, 0xE4, 0x93, 0xF5, -/*1110*/0x10, 0x12, 0x10, 0x90, 0x12, 0x11, 0x50, 0x22, - 0xE4, 0xFC, 0xC3, 0xED, 0x9F, 0xFA, 0xEF, 0xF5, -/*1120*/0x83, 0x75, 0x82, 0x00, 0x79, 0xFF, 0xE4, 0x93, - 0xCC, 0x6C, 0xCC, 0xA3, 0xD9, 0xF8, 0xDA, 0xF6, -/*1130*/0xE5, 0xE2, 0x30, 0xE4, 0x02, 0x8C, 0xE5, 0xED, - 0x24, 0xFF, 0xFF, 0xEF, 0x75, 0x82, 0xFF, 0xF5, -/*1140*/0x83, 0xE4, 0x93, 0x6C, 0x70, 0x03, 0x7F, 0x01, - 0x22, 0x7F, 0x00, 0x22, 0x22, 0x11, 0x00, 0x00, -/*1150*/0x22, 0x8E, 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D, - 0x5B, 0x8A, 0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01, -/*1160*/0xE4, 0xF5, 0x5F, 0xF5, 0x60, 0xF5, 0x62, 0x12, - 0x07, 0x2A, 0x75, 0x83, 0xD0, 0xE0, 0xFF, 0xC4, -/*1170*/0x54, 0x0F, 0xF5, 0x61, 0x12, 0x1E, 0xA5, 0x85, - 0x59, 0x5E, 0xD3, 0xE5, 0x5E, 0x95, 0x5B, 0xE5, -/*1180*/0x5A, 0x12, 0x07, 0x6B, 0x50, 0x4B, 0x12, 0x07, - 0x03, 0x75, 0x83, 0xBC, 0xE0, 0x45, 0x5E, 0x12, -/*1190*/0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x45, 0x5E, - 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0, 0x45, -/*11A0*/0x5E, 0xF0, 0xAF, 0x5F, 0xE5, 0x60, 0x12, 0x08, - 0x78, 0x12, 0x0A, 0xFF, 0xAF, 0x62, 0x7E, 0x00, -/*11B0*/0xAD, 0x5D, 0xAC, 0x5C, 0x12, 0x04, 0x44, 0xE5, - 0x61, 0xAF, 0x5E, 0x7E, 0x00, 0xB4, 0x03, 0x05, -/*11C0*/0x12, 0x1E, 0x21, 0x80, 0x07, 0xAD, 0x5D, 0xAC, - 0x5C, 0x12, 0x13, 0x17, 0x05, 0x5E, 0x02, 0x11, -/*11D0*/0x7A, 0x12, 0x07, 0x03, 0x75, 0x83, 0xBC, 0xE0, - 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBE, -/*11E0*/0xE0, 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83, - 0xC0, 0xE0, 0x45, 0x40, 0xF0, 0x22, 0x8E, 0x58, -/*11F0*/0x8F, 0x59, 0x75, 0x5A, 0x01, 0x79, 0x01, 0x75, - 0x5B, 0x01, 0xE4, 0xFB, 0x12, 0x07, 0x2A, 0x75, -/*1200*/0x83, 0xAE, 0xE0, 0x54, 0x1A, 0xFF, 0x12, 0x08, - 0x65, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0xFE, 0xEF, -/*1210*/0x70, 0x0C, 0xEE, 0x65, 0x35, 0x70, 0x07, 0x90, - 0x07, 0x2F, 0xE0, 0xB4, 0x01, 0x0D, 0xAF, 0x35, -/*1220*/0x7E, 0x00, 0x12, 0x0E, 0xA9, 0xCF, 0xEB, 0xCF, - 0x02, 0x1E, 0x60, 0xE5, 0x59, 0x64, 0x02, 0x45, -/*1230*/0x58, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, - 0x00, 0xE5, 0x59, 0x45, 0x58, 0x70, 0x04, 0x7E, -/*1240*/0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60, - 0x23, 0x85, 0x41, 0x49, 0x85, 0x40, 0x4B, 0xE5, -/*1250*/0x59, 0x45, 0x58, 0x70, 0x2C, 0xAF, 0x5A, 0xFE, - 0xCD, 0xE9, 0xCD, 0xFC, 0xAB, 0x59, 0xAA, 0x58, -/*1260*/0x12, 0x0A, 0xFF, 0xAF, 0x5B, 0x7E, 0x00, 0x12, - 0x1E, 0x60, 0x80, 0x15, 0xAF, 0x5B, 0x7E, 0x00, -/*1270*/0x12, 0x1E, 0x60, 0x90, 0x07, 0x26, 0x12, 0x07, - 0x35, 0xE5, 0x49, 0x12, 0x07, 0x31, 0xE5, 0x4B, -/*1280*/0xF0, 0xE4, 0xFD, 0xAF, 0x35, 0xFE, 0xFC, 0x12, - 0x09, 0x15, 0x22, 0x8C, 0x64, 0x8D, 0x65, 0x12, -/*1290*/0x08, 0xDA, 0x40, 0x3C, 0xE5, 0x65, 0x45, 0x64, - 0x70, 0x10, 0x12, 0x09, 0x04, 0xC3, 0xE5, 0x3E, -/*12A0*/0x12, 0x07, 0x69, 0x40, 0x3B, 0x12, 0x08, 0x95, - 0x80, 0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40, -/*12B0*/0x1D, 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05, - 0x85, 0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39, -/*12C0*/0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3E, 0x12, - 0x07, 0x53, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x3B, -/*12D0*/0xE5, 0x65, 0x45, 0x64, 0x70, 0x11, 0x12, 0x07, - 0x5F, 0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x1F, -/*12E0*/0x12, 0x07, 0x3E, 0xE5, 0x41, 0xF0, 0x22, 0xE5, - 0x3C, 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C, -/*12F0*/0x38, 0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39, - 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, -/*1300*/0x07, 0xA8, 0xE5, 0x3C, 0x12, 0x07, 0x53, 0xE5, - 0x3D, 0xF0, 0x22, 0x12, 0x07, 0x9F, 0xE5, 0x38, -/*1310*/0x12, 0x07, 0x53, 0xE5, 0x39, 0xF0, 0x22, 0x8C, - 0x63, 0x8D, 0x64, 0x12, 0x08, 0xDA, 0x40, 0x3C, -/*1320*/0xE5, 0x64, 0x45, 0x63, 0x70, 0x10, 0x12, 0x09, - 0x04, 0xC3, 0xE5, 0x3E, 0x12, 0x07, 0x69, 0x40, -/*1330*/0x3B, 0x12, 0x08, 0x95, 0x80, 0x18, 0xE5, 0x3E, - 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3E, 0x38, -/*1340*/0xE5, 0x3E, 0x60, 0x05, 0x85, 0x3F, 0x39, 0x80, - 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x07, -/*1350*/0xA8, 0xE5, 0x3E, 0x12, 0x07, 0x53, 0xE5, 0x3F, - 0xF0, 0x22, 0x80, 0x3B, 0xE5, 0x64, 0x45, 0x63, -/*1360*/0x70, 0x11, 0x12, 0x07, 0x5F, 0x40, 0x05, 0x12, - 0x08, 0x9E, 0x80, 0x1F, 0x12, 0x07, 0x3E, 0xE5, -/*1370*/0x41, 0xF0, 0x22, 0xE5, 0x3C, 0xC3, 0x95, 0x38, - 0x40, 0x1D, 0x85, 0x3C, 0x38, 0xE5, 0x3C, 0x60, -/*1380*/0x05, 0x85, 0x3D, 0x39, 0x80, 0x03, 0x85, 0x39, - 0x39, 0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3C, -/*1390*/0x12, 0x07, 0x53, 0xE5, 0x3D, 0xF0, 0x22, 0x12, - 0x07, 0x9F, 0xE5, 0x38, 0x12, 0x07, 0x53, 0xE5, -/*13A0*/0x39, 0xF0, 0x22, 0xE5, 0x0D, 0xFE, 0xE5, 0x08, - 0x8E, 0x54, 0x44, 0x05, 0xF5, 0x55, 0x75, 0x15, -/*13B0*/0x0F, 0xF5, 0x82, 0x12, 0x0E, 0x7A, 0x12, 0x17, - 0xA3, 0x20, 0x31, 0x05, 0x75, 0x15, 0x03, 0x80, -/*13C0*/0x03, 0x75, 0x15, 0x0B, 0xE5, 0x0A, 0xC3, 0x94, - 0x01, 0x50, 0x38, 0x12, 0x14, 0x20, 0x20, 0x31, -/*13D0*/0x06, 0x05, 0x15, 0x05, 0x15, 0x80, 0x04, 0x15, - 0x15, 0x15, 0x15, 0xE5, 0x0A, 0xC3, 0x94, 0x01, -/*13E0*/0x50, 0x21, 0x12, 0x14, 0x20, 0x20, 0x31, 0x04, - 0x05, 0x15, 0x80, 0x02, 0x15, 0x15, 0xE5, 0x0A, -/*13F0*/0xC3, 0x94, 0x01, 0x50, 0x0E, 0x12, 0x0E, 0x77, - 0x12, 0x17, 0xA3, 0x20, 0x31, 0x05, 0x05, 0x15, -/*1400*/0x12, 0x0E, 0x77, 0xE5, 0x15, 0xB4, 0x08, 0x04, - 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x15, -/*1410*/0xB4, 0x07, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, - 0x00, 0xEE, 0x4F, 0x60, 0x02, 0x05, 0x7F, 0x22, -/*1420*/0x85, 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15, - 0xF0, 0x12, 0x17, 0xA3, 0x22, 0x12, 0x07, 0x2A, -/*1430*/0x75, 0x83, 0xAE, 0x74, 0xFF, 0x12, 0x07, 0x29, - 0xE0, 0x54, 0x1A, 0xF5, 0x34, 0xE0, 0xC4, 0x13, -/*1440*/0x54, 0x07, 0xF5, 0x35, 0x24, 0xFE, 0x60, 0x24, - 0x24, 0xFE, 0x60, 0x3C, 0x24, 0x04, 0x70, 0x63, -/*1450*/0x75, 0x31, 0x2D, 0xE5, 0x08, 0xFD, 0x74, 0xB6, - 0x12, 0x07, 0x92, 0x74, 0xBC, 0x90, 0x07, 0x22, -/*1460*/0x12, 0x07, 0x95, 0x74, 0x90, 0x12, 0x07, 0xB3, - 0x74, 0x92, 0x80, 0x3C, 0x75, 0x31, 0x3A, 0xE5, -/*1470*/0x08, 0xFD, 0x74, 0xBA, 0x12, 0x07, 0x92, 0x74, - 0xC0, 0x90, 0x07, 0x22, 0x12, 0x07, 0xB6, 0x74, -/*1480*/0xC4, 0x12, 0x07, 0xB3, 0x74, 0xC8, 0x80, 0x20, - 0x75, 0x31, 0x35, 0xE5, 0x08, 0xFD, 0x74, 0xB8, -/*1490*/0x12, 0x07, 0x92, 0x74, 0xBE, 0xFF, 0xED, 0x44, - 0x07, 0x90, 0x07, 0x22, 0xCF, 0xF0, 0xA3, 0xEF, -/*14A0*/0xF0, 0x74, 0xC2, 0x12, 0x07, 0xB3, 0x74, 0xC6, - 0xFF, 0xED, 0x44, 0x07, 0xA3, 0xCF, 0xF0, 0xA3, -/*14B0*/0xEF, 0xF0, 0x22, 0x75, 0x34, 0x01, 0x22, 0x8E, - 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D, 0x5B, 0x8A, -/*14C0*/0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01, 0xE4, 0xF5, - 0x5F, 0x12, 0x1E, 0xA5, 0x85, 0x59, 0x5E, 0xD3, -/*14D0*/0xE5, 0x5E, 0x95, 0x5B, 0xE5, 0x5A, 0x12, 0x07, - 0x6B, 0x50, 0x57, 0xE5, 0x5D, 0x45, 0x5C, 0x70, -/*14E0*/0x30, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x92, 0xE5, - 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE5, -/*14F0*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8, 0xE5, - 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0x90, 0xE5, -/*1500*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5, - 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x80, -/*1510*/0x03, 0x12, 0x07, 0x32, 0xE5, 0x5E, 0xF0, 0xAF, - 0x5F, 0x7E, 0x00, 0xAD, 0x5D, 0xAC, 0x5C, 0x12, -/*1520*/0x04, 0x44, 0xAF, 0x5E, 0x7E, 0x00, 0xAD, 0x5D, - 0xAC, 0x5C, 0x12, 0x0B, 0xD1, 0x05, 0x5E, 0x02, -/*1530*/0x14, 0xCF, 0xAB, 0x5D, 0xAA, 0x5C, 0xAD, 0x5B, - 0xAC, 0x5A, 0xAF, 0x59, 0xAE, 0x58, 0x02, 0x1B, -/*1540*/0xFB, 0x8C, 0x5C, 0x8D, 0x5D, 0x8A, 0x5E, 0x8B, - 0x5F, 0x75, 0x60, 0x01, 0xE4, 0xF5, 0x61, 0xF5, -/*1550*/0x62, 0xF5, 0x63, 0x12, 0x1E, 0xA5, 0x8F, 0x60, - 0xD3, 0xE5, 0x60, 0x95, 0x5D, 0xE5, 0x5C, 0x12, -/*1560*/0x07, 0x6B, 0x50, 0x61, 0xE5, 0x5F, 0x45, 0x5E, - 0x70, 0x27, 0x12, 0x07, 0x2A, 0x75, 0x83, 0xB6, -/*1570*/0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xB8, - 0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBA, -/*1580*/0xE5, 0x60, 0xF0, 0xAF, 0x61, 0x7E, 0x00, 0xE5, - 0x62, 0x12, 0x08, 0x7A, 0x12, 0x0A, 0xFF, 0x80, -/*1590*/0x19, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE5, - 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0x8E, 0xE4, -/*15A0*/0x12, 0x07, 0x29, 0x74, 0x01, 0x12, 0x07, 0x29, - 0xE4, 0xF0, 0xAF, 0x63, 0x7E, 0x00, 0xAD, 0x5F, -/*15B0*/0xAC, 0x5E, 0x12, 0x04, 0x44, 0xAF, 0x60, 0x7E, - 0x00, 0xAD, 0x5F, 0xAC, 0x5E, 0x12, 0x12, 0x8B, -/*15C0*/0x05, 0x60, 0x02, 0x15, 0x58, 0x22, 0x90, 0x11, - 0x4D, 0xE4, 0x93, 0x90, 0x07, 0x2E, 0xF0, 0x12, -/*15D0*/0x08, 0x1F, 0x75, 0x83, 0xAE, 0xE0, 0x54, 0x1A, - 0xF5, 0x34, 0x70, 0x67, 0xEF, 0x44, 0x07, 0xF5, -/*15E0*/0x82, 0x75, 0x83, 0xCE, 0xE0, 0xFF, 0x13, 0x13, - 0x13, 0x54, 0x07, 0xF5, 0x36, 0x54, 0x0F, 0xD3, -/*15F0*/0x94, 0x00, 0x40, 0x06, 0x12, 0x14, 0x2D, 0x12, - 0x1B, 0xA9, 0xE5, 0x36, 0x54, 0x0F, 0x24, 0xFE, -/*1600*/0x60, 0x0C, 0x14, 0x60, 0x0C, 0x14, 0x60, 0x19, - 0x24, 0x03, 0x70, 0x37, 0x80, 0x10, 0x02, 0x1E, -/*1610*/0x91, 0x12, 0x1E, 0x91, 0x12, 0x07, 0x2A, 0x75, - 0x83, 0xCE, 0xE0, 0x54, 0xEF, 0xF0, 0x02, 0x1D, -/*1620*/0xAE, 0x12, 0x10, 0x14, 0xE4, 0xF5, 0x55, 0x12, - 0x1D, 0x85, 0x05, 0x55, 0xE5, 0x55, 0xC3, 0x94, -/*1630*/0x05, 0x40, 0xF4, 0x12, 0x07, 0x2A, 0x75, 0x83, - 0xCE, 0xE0, 0x54, 0xC7, 0x12, 0x07, 0x29, 0xE0, -/*1640*/0x44, 0x08, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5, - 0x59, 0xAF, 0x08, 0xEF, 0x44, 0x07, 0xF5, 0x82, -/*1650*/0x75, 0x83, 0xD0, 0xE0, 0xFD, 0xC4, 0x54, 0x0F, - 0xF5, 0x5A, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0x75, -/*1660*/0x83, 0x80, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x21, - 0x75, 0x83, 0x82, 0xE5, 0x45, 0xF0, 0xEF, 0x44, -/*1670*/0x07, 0xF5, 0x82, 0x75, 0x83, 0x8A, 0x74, 0xFF, - 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x07, 0x2A, 0x75, -/*1680*/0x83, 0xBC, 0xE0, 0x54, 0xEF, 0x12, 0x07, 0x29, - 0x75, 0x83, 0xBE, 0xE0, 0x54, 0xEF, 0x12, 0x07, -/*1690*/0x29, 0x75, 0x83, 0xC0, 0xE0, 0x54, 0xEF, 0x12, - 0x07, 0x29, 0x75, 0x83, 0xBC, 0xE0, 0x44, 0x10, -/*16A0*/0x12, 0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x44, - 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0, -/*16B0*/0x44, 0x10, 0xF0, 0xAF, 0x58, 0xE5, 0x59, 0x12, - 0x08, 0x78, 0x02, 0x0A, 0xFF, 0xE4, 0xF5, 0x58, -/*16C0*/0x7D, 0x01, 0xF5, 0x59, 0xAF, 0x35, 0xFE, 0xFC, - 0x12, 0x09, 0x15, 0x12, 0x07, 0x2A, 0x75, 0x83, -/*16D0*/0xB6, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, - 0xB8, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, -/*16E0*/0xBA, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, - 0xBC, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, -/*16F0*/0xBE, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, - 0xC0, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, -/*1700*/0x90, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, - 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4, -/*1710*/0x12, 0x07, 0x29, 0x75, 0x83, 0x92, 0xE4, 0x12, - 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE4, 0x12, 0x07, -/*1720*/0x29, 0x75, 0x83, 0xC8, 0xE4, 0xF0, 0xAF, 0x58, - 0xFE, 0xE5, 0x59, 0x12, 0x08, 0x7A, 0x02, 0x0A, -/*1730*/0xFF, 0xE5, 0xE2, 0x30, 0xE4, 0x6C, 0xE5, 0xE7, - 0x54, 0xC0, 0x64, 0x40, 0x70, 0x64, 0xE5, 0x09, -/*1740*/0xC4, 0x54, 0x30, 0xFE, 0xE5, 0x08, 0x25, 0xE0, - 0x25, 0xE0, 0x54, 0xC0, 0x4E, 0xFE, 0xEF, 0x54, -/*1750*/0x3F, 0x4E, 0xFD, 0xE5, 0x2B, 0xAE, 0x2A, 0x78, - 0x02, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, -/*1760*/0xF5, 0x82, 0x8E, 0x83, 0xED, 0xF0, 0xE5, 0x2B, - 0xAE, 0x2A, 0x78, 0x02, 0xC3, 0x33, 0xCE, 0x33, -/*1770*/0xCE, 0xD8, 0xF9, 0xFF, 0xF5, 0x82, 0x8E, 0x83, - 0xA3, 0xE5, 0xFE, 0xF0, 0x8F, 0x82, 0x8E, 0x83, -/*1780*/0xA3, 0xA3, 0xE5, 0xFD, 0xF0, 0x8F, 0x82, 0x8E, - 0x83, 0xA3, 0xA3, 0xA3, 0xE5, 0xFC, 0xF0, 0xC3, -/*1790*/0xE5, 0x2B, 0x94, 0xFA, 0xE5, 0x2A, 0x94, 0x00, - 0x50, 0x08, 0x05, 0x2B, 0xE5, 0x2B, 0x70, 0x02, -/*17A0*/0x05, 0x2A, 0x22, 0xE4, 0xFF, 0xE4, 0xF5, 0x58, - 0xF5, 0x56, 0xF5, 0x57, 0x74, 0x82, 0xFC, 0x12, -/*17B0*/0x0E, 0x04, 0x8C, 0x83, 0xE0, 0xF5, 0x10, 0x54, - 0x7F, 0xF0, 0xE5, 0x10, 0x44, 0x80, 0x12, 0x0E, -/*17C0*/0x98, 0xED, 0xF0, 0x7E, 0x0A, 0x12, 0x0E, 0x04, - 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0, 0x26, 0xDE, -/*17D0*/0xF4, 0x05, 0x57, 0xE5, 0x57, 0x70, 0x02, 0x05, - 0x56, 0xE5, 0x14, 0x24, 0x01, 0xFD, 0xE4, 0x33, -/*17E0*/0xFC, 0xD3, 0xE5, 0x57, 0x9D, 0xE5, 0x56, 0x9C, - 0x40, 0xD9, 0xE5, 0x0A, 0x94, 0x20, 0x50, 0x02, -/*17F0*/0x05, 0x0A, 0x43, 0xE1, 0x08, 0xC2, 0x31, 0x12, - 0x0E, 0x04, 0x75, 0x83, 0xA6, 0xE0, 0x55, 0x12, -/*1800*/0x65, 0x12, 0x70, 0x03, 0xD2, 0x31, 0x22, 0xC2, - 0x31, 0x22, 0x90, 0x07, 0x26, 0xE0, 0xFA, 0xA3, -/*1810*/0xE0, 0xF5, 0x82, 0x8A, 0x83, 0xE0, 0xF5, 0x41, - 0xE5, 0x39, 0xC3, 0x95, 0x41, 0x40, 0x26, 0xE5, -/*1820*/0x39, 0x95, 0x41, 0xC3, 0x9F, 0xEE, 0x12, 0x07, - 0x6B, 0x40, 0x04, 0x7C, 0x01, 0x80, 0x02, 0x7C, -/*1830*/0x00, 0xE5, 0x41, 0x64, 0x3F, 0x60, 0x04, 0x7B, - 0x01, 0x80, 0x02, 0x7B, 0x00, 0xEC, 0x5B, 0x60, -/*1840*/0x29, 0x05, 0x41, 0x80, 0x28, 0xC3, 0xE5, 0x41, - 0x95, 0x39, 0xC3, 0x9F, 0xEE, 0x12, 0x07, 0x6B, -/*1850*/0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, - 0xE5, 0x41, 0x60, 0x04, 0x7E, 0x01, 0x80, 0x02, -/*1860*/0x7E, 0x00, 0xEF, 0x5E, 0x60, 0x04, 0x15, 0x41, - 0x80, 0x03, 0x85, 0x39, 0x41, 0x85, 0x3A, 0x40, -/*1870*/0x22, 0xE5, 0xE2, 0x30, 0xE4, 0x60, 0xE5, 0xE1, - 0x30, 0xE2, 0x5B, 0xE5, 0x09, 0x70, 0x04, 0x7F, -/*1880*/0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x08, 0x70, - 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, -/*1890*/0x5F, 0x60, 0x43, 0x53, 0xF9, 0xF8, 0xE5, 0xE2, - 0x30, 0xE4, 0x3B, 0xE5, 0xE1, 0x30, 0xE2, 0x2E, -/*18A0*/0x43, 0xFA, 0x02, 0x53, 0xFA, 0xFB, 0xE4, 0xF5, - 0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0xE5, -/*18B0*/0xE1, 0x30, 0xE2, 0xE7, 0x90, 0x94, 0x70, 0xE0, - 0x65, 0x10, 0x60, 0x03, 0x43, 0xFA, 0x04, 0x05, -/*18C0*/0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0x70, - 0xE6, 0x12, 0x00, 0x06, 0x80, 0xE1, 0x53, 0xFA, -/*18D0*/0xFD, 0x53, 0xFA, 0xFB, 0x80, 0xC0, 0x22, 0x8F, - 0x54, 0x12, 0x00, 0x06, 0xE5, 0xE1, 0x30, 0xE0, -/*18E0*/0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, - 0x7E, 0xD3, 0x94, 0x05, 0x40, 0x04, 0x7E, 0x01, -/*18F0*/0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60, 0x3D, - 0x85, 0x54, 0x11, 0xE5, 0xE2, 0x20, 0xE1, 0x32, -/*1900*/0x74, 0xCE, 0x12, 0x1A, 0x05, 0x30, 0xE7, 0x04, - 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0x8F, 0x82, -/*1910*/0x8E, 0x83, 0xE0, 0x30, 0xE6, 0x04, 0x7F, 0x01, - 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x5D, 0x70, 0x15, -/*1920*/0x12, 0x15, 0xC6, 0x74, 0xCE, 0x12, 0x1A, 0x05, - 0x30, 0xE6, 0x07, 0xE0, 0x44, 0x80, 0xF0, 0x43, -/*1930*/0xF9, 0x80, 0x12, 0x18, 0x71, 0x22, 0x12, 0x0E, - 0x44, 0xE5, 0x16, 0x25, 0xE0, 0x25, 0xE0, 0x24, -/*1940*/0xB0, 0xF5, 0x82, 0xE4, 0x34, 0x1A, 0xF5, 0x83, - 0xE4, 0x93, 0xF5, 0x0F, 0xE5, 0x16, 0x25, 0xE0, -/*1950*/0x25, 0xE0, 0x24, 0xB1, 0xF5, 0x82, 0xE4, 0x34, - 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0E, 0x12, -/*1960*/0x0E, 0x65, 0xF5, 0x10, 0xE5, 0x0F, 0x54, 0xF0, - 0x12, 0x0E, 0x17, 0x75, 0x83, 0x8C, 0xEF, 0xF0, -/*1970*/0xE5, 0x0F, 0x30, 0xE0, 0x0C, 0x12, 0x0E, 0x04, - 0x75, 0x83, 0x86, 0xE0, 0x44, 0x40, 0xF0, 0x80, -/*1980*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x86, 0xE0, - 0x54, 0xBF, 0xF0, 0x12, 0x0E, 0x91, 0x75, 0x83, -/*1990*/0x82, 0xE5, 0x0E, 0xF0, 0x22, 0x7F, 0x05, 0x12, - 0x17, 0x31, 0x12, 0x0E, 0x04, 0x12, 0x0E, 0x33, -/*19A0*/0x74, 0x02, 0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E, - 0x04, 0x12, 0x0E, 0x0B, 0xEF, 0xF0, 0x75, 0x15, -/*19B0*/0x70, 0x12, 0x0F, 0xF7, 0x20, 0x34, 0x05, 0x75, - 0x15, 0x10, 0x80, 0x03, 0x75, 0x15, 0x50, 0x12, -/*19C0*/0x0F, 0xF7, 0x20, 0x34, 0x04, 0x74, 0x10, 0x80, - 0x02, 0x74, 0xF0, 0x25, 0x15, 0xF5, 0x15, 0x12, -/*19D0*/0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x20, - 0x34, 0x17, 0xE5, 0x15, 0x64, 0x30, 0x60, 0x0C, -/*19E0*/0x74, 0x10, 0x25, 0x15, 0xF5, 0x15, 0xB4, 0x80, - 0x03, 0xE4, 0xF5, 0x15, 0x12, 0x0E, 0x21, 0xEF, -/*19F0*/0xF0, 0x22, 0xF0, 0xE5, 0x0B, 0x25, 0xE0, 0x25, - 0xE0, 0x24, 0x82, 0xF5, 0x82, 0xE4, 0x34, 0x07, -/*1A00*/0xF5, 0x83, 0x22, 0x74, 0x88, 0xFE, 0xE5, 0x08, - 0x44, 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, -/*1A10*/0x22, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, - 0x22, 0xF0, 0xE0, 0x54, 0xC0, 0x8F, 0x82, 0x8E, -/*1A20*/0x83, 0xF0, 0x22, 0xEF, 0x44, 0x07, 0xF5, 0x82, - 0x75, 0x83, 0x86, 0xE0, 0x54, 0x10, 0xD3, 0x94, -/*1A30*/0x00, 0x22, 0xF0, 0x90, 0x07, 0x15, 0xE0, 0x04, - 0xF0, 0x22, 0x44, 0x06, 0xF5, 0x82, 0x75, 0x83, -/*1A40*/0x9E, 0xE0, 0x22, 0xFE, 0xEF, 0x44, 0x07, 0xF5, - 0x82, 0x8E, 0x83, 0xE0, 0x22, 0xE4, 0x90, 0x07, -/*1A50*/0x2A, 0xF0, 0xA3, 0xF0, 0x12, 0x07, 0x2A, 0x75, - 0x83, 0x82, 0xE0, 0x54, 0x7F, 0x12, 0x07, 0x29, -/*1A60*/0xE0, 0x44, 0x80, 0xF0, 0x12, 0x10, 0xFC, 0x12, - 0x08, 0x1F, 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0, -/*1A70*/0x1A, 0x90, 0x07, 0x2B, 0xE0, 0x04, 0xF0, 0x70, - 0x06, 0x90, 0x07, 0x2A, 0xE0, 0x04, 0xF0, 0x90, -/*1A80*/0x07, 0x2A, 0xE0, 0xB4, 0x10, 0xE1, 0xA3, 0xE0, - 0xB4, 0x00, 0xDC, 0xEE, 0x44, 0xA6, 0xFC, 0xEF, -/*1A90*/0x44, 0x07, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0xF5, - 0x32, 0xEE, 0x44, 0xA8, 0xFE, 0xEF, 0x44, 0x07, -/*1AA0*/0xF5, 0x82, 0x8E, 0x83, 0xE0, 0xF5, 0x33, 0x22, - 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x90, -/*1AB0*/0x00, 0x20, 0x0F, 0x92, 0x00, 0x21, 0x0F, 0x94, - 0x00, 0x22, 0x0F, 0x96, 0x00, 0x23, 0x0F, 0x98, -/*1AC0*/0x00, 0x24, 0x0F, 0x9A, 0x00, 0x25, 0x0F, 0x9C, - 0x00, 0x26, 0x0F, 0x9E, 0x00, 0x27, 0x0F, 0xA0, -/*1AD0*/0x01, 0x20, 0x01, 0xA2, 0x01, 0x21, 0x01, 0xA4, - 0x01, 0x22, 0x01, 0xA6, 0x01, 0x23, 0x01, 0xA8, -/*1AE0*/0x01, 0x24, 0x01, 0xAA, 0x01, 0x25, 0x01, 0xAC, - 0x01, 0x26, 0x01, 0xAE, 0x01, 0x27, 0x01, 0xB0, -/*1AF0*/0x01, 0x28, 0x01, 0xB4, 0x00, 0x28, 0x0F, 0xB6, - 0x40, 0x28, 0x0F, 0xB8, 0x61, 0x28, 0x01, 0xCB, -/*1B00*/0xEF, 0xCB, 0xCA, 0xEE, 0xCA, 0x7F, 0x01, 0xE4, - 0xFD, 0xEB, 0x4A, 0x70, 0x24, 0xE5, 0x08, 0xF5, -/*1B10*/0x82, 0x74, 0xB6, 0x12, 0x08, 0x29, 0xE5, 0x08, - 0xF5, 0x82, 0x74, 0xB8, 0x12, 0x08, 0x29, 0xE5, -/*1B20*/0x08, 0xF5, 0x82, 0x74, 0xBA, 0x12, 0x08, 0x29, - 0x7E, 0x00, 0x7C, 0x00, 0x12, 0x0A, 0xFF, 0x80, -/*1B30*/0x12, 0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE5, - 0x41, 0xF0, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35, -/*1B40*/0xE5, 0x40, 0xF0, 0x12, 0x07, 0x2A, 0x75, 0x83, - 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74, 0x01, 0x12, -/*1B50*/0x07, 0x29, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x26, - 0xF5, 0x27, 0x53, 0xE1, 0xFE, 0xF5, 0x2A, 0x75, -/*1B60*/0x2B, 0x01, 0xF5, 0x08, 0x7F, 0x01, 0x12, 0x17, - 0x31, 0x30, 0x30, 0x1C, 0x90, 0x1A, 0xA9, 0xE4, -/*1B70*/0x93, 0xF5, 0x10, 0x90, 0x1F, 0xF9, 0xE4, 0x93, - 0xF5, 0x10, 0x90, 0x00, 0x41, 0xE4, 0x93, 0xF5, -/*1B80*/0x10, 0x90, 0x1E, 0xCA, 0xE4, 0x93, 0xF5, 0x10, - 0x7F, 0x02, 0x12, 0x17, 0x31, 0x12, 0x0F, 0x54, -/*1B90*/0x7F, 0x03, 0x12, 0x17, 0x31, 0x12, 0x00, 0x06, - 0xE5, 0xE2, 0x30, 0xE7, 0x09, 0x12, 0x10, 0x00, -/*1BA0*/0x30, 0x30, 0x03, 0x12, 0x11, 0x00, 0x02, 0x00, - 0x47, 0x12, 0x08, 0x1F, 0x75, 0x83, 0xD0, 0xE0, -/*1BB0*/0xC4, 0x54, 0x0F, 0xFD, 0x75, 0x43, 0x01, 0x75, - 0x44, 0xFF, 0x12, 0x08, 0xAA, 0x74, 0x04, 0xF0, -/*1BC0*/0x75, 0x3B, 0x01, 0xED, 0x14, 0x60, 0x0C, 0x14, - 0x60, 0x0B, 0x14, 0x60, 0x0F, 0x24, 0x03, 0x70, -/*1BD0*/0x0B, 0x80, 0x09, 0x80, 0x00, 0x12, 0x08, 0xA7, - 0x04, 0xF0, 0x80, 0x06, 0x12, 0x08, 0xA7, 0x74, -/*1BE0*/0x04, 0xF0, 0xEE, 0x44, 0x82, 0xFE, 0xEF, 0x44, - 0x07, 0xF5, 0x82, 0x8E, 0x83, 0xE5, 0x45, 0x12, -/*1BF0*/0x08, 0xBE, 0x75, 0x83, 0x82, 0xE5, 0x31, 0xF0, - 0x02, 0x11, 0x4C, 0x8E, 0x60, 0x8F, 0x61, 0x12, -/*1C00*/0x1E, 0xA5, 0xE4, 0xFF, 0xCE, 0xED, 0xCE, 0xEE, - 0xD3, 0x95, 0x61, 0xE5, 0x60, 0x12, 0x07, 0x6B, -/*1C10*/0x40, 0x39, 0x74, 0x20, 0x2E, 0xF5, 0x82, 0xE4, - 0x34, 0x03, 0xF5, 0x83, 0xE0, 0x70, 0x03, 0xFF, -/*1C20*/0x80, 0x26, 0x12, 0x08, 0xE2, 0xFD, 0xC3, 0x9F, - 0x40, 0x1E, 0xCF, 0xED, 0xCF, 0xEB, 0x4A, 0x70, -/*1C30*/0x0B, 0x8D, 0x42, 0x12, 0x08, 0xEE, 0xF5, 0x41, - 0x8E, 0x40, 0x80, 0x0C, 0x12, 0x08, 0xE2, 0xF5, -/*1C40*/0x38, 0x12, 0x08, 0xEE, 0xF5, 0x39, 0x8E, 0x3A, - 0x1E, 0x80, 0xBC, 0x22, 0x75, 0x58, 0x01, 0xE5, -/*1C50*/0x35, 0x70, 0x0C, 0x12, 0x07, 0xCC, 0xE0, 0xF5, - 0x4A, 0x12, 0x07, 0xD8, 0xE0, 0xF5, 0x4C, 0xE5, -/*1C60*/0x35, 0xB4, 0x04, 0x0C, 0x12, 0x07, 0xE4, 0xE0, - 0xF5, 0x4A, 0x12, 0x07, 0xF0, 0xE0, 0xF5, 0x4C, -/*1C70*/0xE5, 0x35, 0xB4, 0x01, 0x04, 0x7F, 0x01, 0x80, - 0x02, 0x7F, 0x00, 0xE5, 0x35, 0xB4, 0x02, 0x04, -/*1C80*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, - 0x60, 0x0C, 0x12, 0x07, 0xFC, 0xE0, 0xF5, 0x4A, -/*1C90*/0x12, 0x08, 0x08, 0xE0, 0xF5, 0x4C, 0x85, 0x41, - 0x49, 0x85, 0x40, 0x4B, 0x22, 0x75, 0x5B, 0x01, -/*1CA0*/0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE0, 0x54, - 0x1F, 0xFF, 0xD3, 0x94, 0x02, 0x50, 0x04, 0x8F, -/*1CB0*/0x58, 0x80, 0x05, 0xEF, 0x24, 0xFE, 0xF5, 0x58, - 0xEF, 0xC3, 0x94, 0x18, 0x40, 0x05, 0x75, 0x59, -/*1CC0*/0x18, 0x80, 0x04, 0xEF, 0x04, 0xF5, 0x59, 0x85, - 0x43, 0x5A, 0xAF, 0x58, 0x7E, 0x00, 0xAD, 0x59, -/*1CD0*/0x7C, 0x00, 0xAB, 0x5B, 0x7A, 0x00, 0x12, 0x15, - 0x41, 0xAF, 0x5A, 0x7E, 0x00, 0x12, 0x18, 0x0A, -/*1CE0*/0xAF, 0x5B, 0x7E, 0x00, 0x02, 0x1A, 0xFF, 0xE5, - 0xE2, 0x30, 0xE7, 0x0E, 0x12, 0x10, 0x03, 0xC2, -/*1CF0*/0x30, 0x30, 0x30, 0x03, 0x12, 0x10, 0xFF, 0x20, - 0x33, 0x28, 0xE5, 0xE7, 0x30, 0xE7, 0x05, 0x12, -/*1D00*/0x0E, 0xA2, 0x80, 0x0D, 0xE5, 0xFE, 0xC3, 0x94, - 0x20, 0x50, 0x06, 0x12, 0x0E, 0xA2, 0x43, 0xF9, -/*1D10*/0x08, 0xE5, 0xF2, 0x30, 0xE7, 0x03, 0x53, 0xF9, - 0x7F, 0xE5, 0xF1, 0x54, 0x70, 0xD3, 0x94, 0x00, -/*1D20*/0x50, 0xD8, 0x22, 0x12, 0x0E, 0x04, 0x75, 0x83, - 0x80, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0x12, -/*1D30*/0x0D, 0xFD, 0x75, 0x83, 0x84, 0x12, 0x0E, 0x02, - 0x75, 0x83, 0x86, 0x12, 0x0E, 0x02, 0x75, 0x83, -/*1D40*/0x8C, 0xE0, 0x54, 0xF3, 0x12, 0x0E, 0x03, 0x75, - 0x83, 0x8E, 0x12, 0x0E, 0x02, 0x75, 0x83, 0x94, -/*1D50*/0xE0, 0x54, 0xFB, 0xF0, 0x22, 0x12, 0x07, 0x2A, - 0x75, 0x83, 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74, -/*1D60*/0x01, 0x12, 0x07, 0x29, 0xE4, 0x12, 0x08, 0xBE, - 0x75, 0x83, 0x8C, 0xE0, 0x44, 0x20, 0x12, 0x08, -/*1D70*/0xBE, 0xE0, 0x54, 0xDF, 0xF0, 0x74, 0x84, 0x85, - 0x08, 0x82, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0xF0, -/*1D80*/0xE0, 0x44, 0x80, 0xF0, 0x22, 0x75, 0x56, 0x01, - 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE, 0xFC, -/*1D90*/0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12, 0x1E, - 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E, 0x00, -/*1DA0*/0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF, - 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0x75, 0x56, -/*1DB0*/0x01, 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE, - 0xFC, 0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12, -/*1DC0*/0x1E, 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E, - 0x00, 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, -/*1DD0*/0xAF, 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xE4, - 0xF5, 0x16, 0x12, 0x0E, 0x44, 0xFE, 0xE5, 0x08, -/*1DE0*/0x44, 0x05, 0xFF, 0x12, 0x0E, 0x65, 0x8F, 0x82, - 0x8E, 0x83, 0xF0, 0x05, 0x16, 0xE5, 0x16, 0xC3, -/*1DF0*/0x94, 0x14, 0x40, 0xE6, 0xE5, 0x08, 0x12, 0x0E, - 0x2B, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5, -/*1E00*/0x59, 0xF5, 0x5A, 0xFF, 0xFE, 0xAD, 0x58, 0xFC, - 0x12, 0x09, 0x15, 0x7F, 0x04, 0x7E, 0x00, 0xAD, -/*1E10*/0x58, 0x7C, 0x00, 0x12, 0x09, 0x15, 0x7F, 0x02, - 0x7E, 0x00, 0xAD, 0x58, 0x7C, 0x00, 0x02, 0x09, -/*1E20*/0x15, 0xE5, 0x3C, 0x25, 0x3E, 0xFC, 0xE5, 0x42, - 0x24, 0x00, 0xFB, 0xE4, 0x33, 0xFA, 0xEC, 0xC3, -/*1E30*/0x9B, 0xEA, 0x12, 0x07, 0x6B, 0x40, 0x0B, 0x8C, - 0x42, 0xE5, 0x3D, 0x25, 0x3F, 0xF5, 0x41, 0x8F, -/*1E40*/0x40, 0x22, 0x12, 0x09, 0x0B, 0x22, 0x74, 0x84, - 0xF5, 0x18, 0x85, 0x08, 0x19, 0x85, 0x19, 0x82, -/*1E50*/0x85, 0x18, 0x83, 0xE0, 0x54, 0x7F, 0xF0, 0xE0, - 0x44, 0x80, 0xF0, 0xE0, 0x44, 0x80, 0xF0, 0x22, -/*1E60*/0xEF, 0x4E, 0x70, 0x0B, 0x12, 0x07, 0x2A, 0x75, - 0x83, 0xD2, 0xE0, 0x54, 0xDF, 0xF0, 0x22, 0x12, -/*1E70*/0x07, 0x2A, 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x20, - 0xF0, 0x22, 0x75, 0x58, 0x01, 0x90, 0x07, 0x26, -/*1E80*/0x12, 0x07, 0x35, 0xE0, 0x54, 0x3F, 0xF5, 0x41, - 0x12, 0x07, 0x32, 0xE0, 0x54, 0x3F, 0xF5, 0x40, -/*1E90*/0x22, 0x75, 0x56, 0x02, 0xE4, 0xF5, 0x57, 0x12, - 0x1D, 0xFC, 0xAF, 0x57, 0x7E, 0x00, 0xAD, 0x56, -/*1EA0*/0x7C, 0x00, 0x02, 0x04, 0x44, 0xE4, 0xF5, 0x42, - 0xF5, 0x41, 0xF5, 0x40, 0xF5, 0x38, 0xF5, 0x39, -/*1EB0*/0xF5, 0x3A, 0x22, 0xEF, 0x54, 0x07, 0xFF, 0xE5, - 0xF9, 0x54, 0xF8, 0x4F, 0xF5, 0xF9, 0x22, 0x7F, -/*1EC0*/0x01, 0xE4, 0xFE, 0x0F, 0x0E, 0xBE, 0xFF, 0xFB, - 0x22, 0x01, 0x20, 0x00, 0x01, 0x04, 0x20, 0x00, -/*1ED0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1EE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1EF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F00*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F10*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F20*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F30*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F40*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F50*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F60*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F70*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F80*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1F90*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1FA0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1FB0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1FC0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1FD0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1FE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -/*1FF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x81 -}; - -int ipath_sd7220_ib_load(struct ipath_devdata *dd) -{ - return ipath_sd7220_prog_ld(dd, IB_7220_SERDES, ipath_sd7220_ib_img, - sizeof(ipath_sd7220_ib_img), 0); -} - -int ipath_sd7220_ib_vfy(struct ipath_devdata *dd) -{ - return ipath_sd7220_prog_vfy(dd, IB_7220_SERDES, ipath_sd7220_ib_img, - sizeof(ipath_sd7220_ib_img), 0); -} |