Merge branch '3.4-rc1' into android-tegra-nv-3.3-rebased

Change-Id: Ib3b69ffc5ac3e07c9cc44cc49e9142088eec477e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

30 files changed, 2133 insertions, 223 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ee476c7599d5..1de9605209bb 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -139,7 +139,6 @@ config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C
 	depends on GPIOLIB
-
 	help
 	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 	  an AAVA device.
@@ -149,6 +148,37 @@ config TOUCHSCREEN_CY8CTMG110
 	  To compile this driver as a module, choose M here: the
 	  module will be called cy8ctmg110_ts.
 
+config TOUCHSCREEN_CYTTSP_CORE
+	tristate "Cypress TTSP touchscreen"
+	help
+	  Say Y here if you have a touchscreen using controller from
+	  the Cypress TrueTouch(tm) Standard Product family connected
+	  to your system. You will also need to select appropriate
+	  bus connection below.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_core.
+
+config TOUCHSCREEN_CYTTSP_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
+	help
+	  Say Y here if the touchscreen is connected via I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_i2c.
+
+config TOUCHSCREEN_CYTTSP_SPI
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
+	help
+	  Say Y here if the touchscreen is connected via SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_spi.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
@@ -213,9 +243,24 @@ config TOUCHSCREEN_FUJITSU
 	  To compile this driver as a module, choose M here: the
 	  module will be called fujitsu-ts.
 
+config TOUCHSCREEN_ILI210X
+	tristate "Ilitek ILI210X based touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a ILI210X based touchscreen
+	  controller. This driver supports models ILI2102,
+	  ILI2102s, ILI2103, ILI2103s and ILI2105.
+	  Such kind of chipsets can be found in Amazon Kindle Fire
+	  touchscreens.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ili210x.
+
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
-	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
+	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 	select S3C_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
@@ -449,6 +494,18 @@ config TOUCHSCREEN_TOUCHWIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchwin.
 
+config TOUCHSCREEN_TI_TSCADC
+	tristate "TI Touchscreen Interface"
+	depends on ARCH_OMAP2PLUS
+	help
+	  Say Y here if you have 4/5/8 wire touchscreen controller
+	  to be connected to the ADC controller on your TI AM335x SoC.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ti_tscadc.
+
 config TOUCHSCREEN_ATMEL_TSADCC
 	tristate "Atmel Touchscreen Interface"
 	depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
@@ -596,6 +653,7 @@ config TOUCHSCREEN_USB_COMPOSITE
 	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 	  - Zytronic controllers
 	  - Elo TouchSystems 2700 IntelliTouch
+	  - EasyTouch USB Touch Controller from Data Modul
 
 	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 	  a usage description and the required user-space stuff.
@@ -700,6 +758,14 @@ config TOUCHSCREEN_USB_NEXIO
 	bool "NEXIO/iNexio device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
+config TOUCHSCREEN_USB_EASYTOUCH
+	default y
+	bool "EasyTouch USB Touch controller device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+	help
+	  Say Y here if you have a EasyTouch USB Touch controller device support.
+	  If unsure, say N.
+
 config TOUCHSCREEN_TOUCHIT213
 	tristate "Sahara TouchIT-213 touchscreen"
 	select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 4ab98545258a..49ffdfa5dcf1 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -16,8 +16,11 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_BU21013)       += bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
@@ -26,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX)	+= egalax_ts.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
 obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
@@ -46,6 +50,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR)	+= pixcir_i2c_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
+obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC)	+= ti_tscadc.o
 obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI)	+= synaptics_i2c_rmi.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 49a36df0b752..2c7692108e6c 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -860,17 +860,7 @@ static struct spi_driver ad7877_driver = {
 	.remove		= __devexit_p(ad7877_remove),
 };
 
-static int __init ad7877_init(void)
-{
-	return spi_register_driver(&ad7877_driver);
-}
-module_init(ad7877_init);
-
-static void __exit ad7877_exit(void)
-{
-	spi_unregister_driver(&ad7877_driver);
-}
-module_exit(ad7877_exit);
+module_spi_driver(ad7877_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("AD7877 touchscreen Driver");
diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c
index 0dac6712f42b..3054354d0dd3 100644
--- a/drivers/input/touchscreen/ad7879-i2c.c
+++ b/drivers/input/touchscreen/ad7879-i2c.c
@@ -102,17 +102,7 @@ static struct i2c_driver ad7879_i2c_driver = {
 	.id_table	= ad7879_id,
 };
 
-static int __init ad7879_i2c_init(void)
-{
-	return i2c_add_driver(&ad7879_i2c_driver);
-}
-module_init(ad7879_i2c_init);
-
-static void __exit ad7879_i2c_exit(void)
-{
-	i2c_del_driver(&ad7879_i2c_driver);
-}
-module_exit(ad7879_i2c_exit);
+module_i2c_driver(ad7879_i2c_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver");
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
index 9b2e1c2b1971..db49abf056ba 100644
--- a/drivers/input/touchscreen/ad7879-spi.c
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -157,17 +157,7 @@ static struct spi_driver ad7879_spi_driver = {
 	.remove		= __devexit_p(ad7879_spi_remove),
 };
 
-static int __init ad7879_spi_init(void)
-{
-	return spi_register_driver(&ad7879_spi_driver);
-}
-module_init(ad7879_spi_init);
-
-static void __exit ad7879_spi_exit(void)
-{
-	spi_unregister_driver(&ad7879_spi_driver);
-}
-module_exit(ad7879_spi_exit);
+module_spi_driver(ad7879_spi_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver");
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 23fd90185659..f02028ec3db6 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1433,17 +1433,7 @@ static struct spi_driver ads7846_driver = {
 	.remove		= __devexit_p(ads7846_remove),
 };
 
-static int __init ads7846_init(void)
-{
-	return spi_register_driver(&ads7846_driver);
-}
-module_init(ads7846_init);
-
-static void __exit ads7846_exit(void)
-{
-	spi_unregister_driver(&ads7846_driver);
-}
-module_exit(ads7846_exit);
+module_spi_driver(ads7846_driver);
 
 MODULE_DESCRIPTION("ADS7846 TouchScreen Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index 8034cbb20f74..c5c2dbb93869 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -392,9 +392,10 @@ static int __exit atmel_wm97xx_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int atmel_wm97xx_suspend(struct platform_device *pdev, pm_message_t msg)
+#ifdef CONFIG_PM_SLEEP
+static int atmel_wm97xx_suspend(struct *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
 
 	ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT);
@@ -404,8 +405,9 @@ static int atmel_wm97xx_suspend(struct platform_device *pdev, pm_message_t msg)
 	return 0;
 }
 
-static int atmel_wm97xx_resume(struct platform_device *pdev)
+static int atmel_wm97xx_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
 	struct wm97xx *wm = atmel_wm97xx->wm;
 
@@ -416,18 +418,18 @@ static int atmel_wm97xx_resume(struct platform_device *pdev)
 
 	return 0;
 }
-#else
-#define atmel_wm97xx_suspend	NULL
-#define atmel_wm97xx_resume	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(atmel_wm97xx_pm_ops,
+			 atmel_wm97xx_suspend, atmel_wm97xx_resume);
+
 static struct platform_driver atmel_wm97xx_driver = {
 	.remove		= __exit_p(atmel_wm97xx_remove),
 	.driver		= {
-		.name = "wm97xx-touch",
+		.name	= "wm97xx-touch",
+		.owner	= THIS_MODULE,
+		.pm	= &atmel_wm97xx_pm_ops,
 	},
-	.suspend	= atmel_wm97xx_suspend,
-	.resume		= atmel_wm97xx_resume,
 };
 
 static int __init atmel_wm97xx_init(void)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ad21ef9c0105..8e09feb10062 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1848,18 +1848,7 @@ static struct i2c_driver mxt_driver = {
 	.id_table	= mxt_id,
 };
 
-static int __init mxt_init(void)
-{
-	return i2c_add_driver(&mxt_driver);
-}
-
-static void __exit mxt_exit(void)
-{
-	i2c_del_driver(&mxt_driver);
-}
-
-module_init(mxt_init);
-module_exit(mxt_exit);
+module_i2c_driver(mxt_driver);
 
 /* Module information */
 MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
index 94fb9fbb08a9..c7047b6bb020 100644
--- a/drivers/input/touchscreen/auo-pixcir-ts.c
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -635,17 +635,7 @@ static struct i2c_driver auo_pixcir_driver = {
 	.id_table	= auo_pixcir_idtable,
 };
 
-static int __init auo_pixcir_init(void)
-{
-	return i2c_add_driver(&auo_pixcir_driver);
-}
-module_init(auo_pixcir_init);
-
-static void __exit auo_pixcir_exit(void)
-{
-	i2c_del_driver(&auo_pixcir_driver);
-}
-module_exit(auo_pixcir_exit);
+module_i2c_driver(auo_pixcir_driver);
 
 MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 902c7214e887..f2d03c06c2da 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -652,30 +652,7 @@ static struct i2c_driver bu21013_driver = {
 	.id_table	=	bu21013_id,
 };
 
-/**
- * bu21013_init() - initializes the bu21013 touchscreen driver
- *
- * This function used to initializes the bu21013
- * touchscreen driver and returns integer.
- */
-static int __init bu21013_init(void)
-{
-	return i2c_add_driver(&bu21013_driver);
-}
-
-/**
- * bu21013_exit() - de-initializes the bu21013 touchscreen driver
- *
- * This function uses to de-initializes the bu21013
- * touchscreen driver and returns none.
- */
-static void __exit bu21013_exit(void)
-{
-	i2c_del_driver(&bu21013_driver);
-}
-
-module_init(bu21013_init);
-module_exit(bu21013_exit);
+module_i2c_driver(bu21013_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>");
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index d8815c5d54ad..237753ad1031 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -350,18 +350,7 @@ static struct i2c_driver cy8ctmg110_driver = {
 	.remove		= __devexit_p(cy8ctmg110_remove),
 };
 
-static int __init cy8ctmg110_init(void)
-{
-	return i2c_add_driver(&cy8ctmg110_driver);
-}
-
-static void __exit cy8ctmg110_exit(void)
-{
-	i2c_del_driver(&cy8ctmg110_driver);
-}
-
-module_init(cy8ctmg110_init);
-module_exit(cy8ctmg110_exit);
+module_i2c_driver(cy8ctmg110_driver);
 
 MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>");
 MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver");
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
new file mode 100644
index 000000000000..f030d9ec795d
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -0,0 +1,625 @@
+/*
+ * Core Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include "cyttsp_core.h"
+
+/* Bootloader number of command keys */
+#define CY_NUM_BL_KEYS		8
+
+/* helpers */
+#define GET_NUM_TOUCHES(x)		((x) & 0x0F)
+#define IS_LARGE_AREA(x)		(((x) & 0x10) >> 4)
+#define IS_BAD_PKT(x)			((x) & 0x20)
+#define IS_VALID_APP(x)			((x) & 0x01)
+#define IS_OPERATIONAL_ERR(x)		((x) & 0x3F)
+#define GET_HSTMODE(reg)		(((reg) & 0x70) >> 4)
+#define GET_BOOTLOADERMODE(reg)		(((reg) & 0x10) >> 4)
+
+#define CY_REG_BASE			0x00
+#define CY_REG_ACT_DIST			0x1E
+#define CY_REG_ACT_INTRVL		0x1D
+#define CY_REG_TCH_TMOUT		(CY_REG_ACT_INTRVL + 1)
+#define CY_REG_LP_INTRVL		(CY_REG_TCH_TMOUT + 1)
+#define CY_MAXZ				255
+#define CY_DELAY_DFLT			20 /* ms */
+#define CY_DELAY_MAX			500
+#define CY_ACT_DIST_DFLT		0xF8
+#define CY_HNDSHK_BIT			0x80
+/* device mode bits */
+#define CY_OPERATE_MODE			0x00
+#define CY_SYSINFO_MODE			0x10
+/* power mode select bits */
+#define CY_SOFT_RESET_MODE		0x01 /* return to Bootloader mode */
+#define CY_DEEP_SLEEP_MODE		0x02
+#define CY_LOW_POWER_MODE		0x04
+
+/* Slots management */
+#define CY_MAX_FINGER			4
+#define CY_MAX_ID			16
+
+static const u8 bl_command[] = {
+	0x00,			/* file offset */
+	0xFF,			/* command */
+	0xA5,			/* exit bootloader command */
+	0, 1, 2, 3, 4, 5, 6, 7	/* default keys */
+};
+
+static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
+				u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->read(ts, command, length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
+				 u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->write(ts, command, length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_send_command(struct cyttsp *ts, u8 cmd)
+{
+	return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
+}
+
+static int cyttsp_load_bl_regs(struct cyttsp *ts)
+{
+	memset(&ts->bl_data, 0, sizeof(ts->bl_data));
+	ts->bl_data.bl_status = 0x10;
+
+	return ttsp_read_block_data(ts, CY_REG_BASE,
+				    sizeof(ts->bl_data), &ts->bl_data);
+}
+
+static int cyttsp_exit_bl_mode(struct cyttsp *ts)
+{
+	int error;
+	u8 bl_cmd[sizeof(bl_command)];
+
+	memcpy(bl_cmd, bl_command, sizeof(bl_command));
+	if (ts->pdata->bl_keys)
+		memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS],
+			ts->pdata->bl_keys, sizeof(bl_command));
+
+	error = ttsp_write_block_data(ts, CY_REG_BASE,
+				      sizeof(bl_cmd), bl_cmd);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete the operation */
+	msleep(CY_DELAY_DFLT);
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status))
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_operational_mode(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_OPERATE_MODE);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete switch to Operational mode */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0;
+}
+
+static int cyttsp_set_sysinfo_mode(struct cyttsp *ts)
+{
+	int error;
+
+	memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data));
+
+	/* switch to sysinfo mode */
+	error = ttsp_send_command(ts, CY_SYSINFO_MODE);
+	if (error)
+		return error;
+
+	/* read sysinfo registers */
+	msleep(CY_DELAY_DFLT);
+	error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data),
+				      &ts->sysinfo_data);
+	if (error)
+		return error;
+
+	if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl)
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_sysinfo_regs(struct cyttsp *ts)
+{
+	int retval = 0;
+
+	if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT ||
+	    ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT ||
+	    ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) {
+
+		u8 intrvl_ray[] = {
+			ts->pdata->act_intrvl,
+			ts->pdata->tch_tmout,
+			ts->pdata->lp_intrvl
+		};
+
+		/* set intrvl registers */
+		retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL,
+					sizeof(intrvl_ray), intrvl_ray);
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return retval;
+}
+
+static int cyttsp_soft_reset(struct cyttsp *ts)
+{
+	unsigned long timeout;
+	int retval;
+
+	/* wait for interrupt to set ready completion */
+	INIT_COMPLETION(ts->bl_ready);
+	ts->state = CY_BL_STATE;
+
+	enable_irq(ts->irq);
+
+	retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE);
+	if (retval)
+		goto out;
+
+	timeout = wait_for_completion_timeout(&ts->bl_ready,
+			msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX));
+	retval = timeout ? 0 : -EIO;
+
+out:
+	ts->state = CY_IDLE_STATE;
+	disable_irq(ts->irq);
+	return retval;
+}
+
+static int cyttsp_act_dist_setup(struct cyttsp *ts)
+{
+	u8 act_dist_setup = ts->pdata->act_dist;
+
+	/* Init gesture; active distance setup */
+	return ttsp_write_block_data(ts, CY_REG_ACT_DIST,
+				sizeof(act_dist_setup), &act_dist_setup);
+}
+
+static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids)
+{
+	ids[0] = xy_data->touch12_id >> 4;
+	ids[1] = xy_data->touch12_id & 0xF;
+	ids[2] = xy_data->touch34_id >> 4;
+	ids[3] = xy_data->touch34_id & 0xF;
+}
+
+static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data,
+					       int idx)
+{
+	switch (idx) {
+	case 0:
+		return &xy_data->tch1;
+	case 1:
+		return &xy_data->tch2;
+	case 2:
+		return &xy_data->tch3;
+	case 3:
+		return &xy_data->tch4;
+	default:
+		return NULL;
+	}
+}
+
+static void cyttsp_report_tchdata(struct cyttsp *ts)
+{
+	struct cyttsp_xydata *xy_data = &ts->xy_data;
+	struct input_dev *input = ts->input;
+	int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat);
+	const struct cyttsp_tch *tch;
+	int ids[CY_MAX_ID];
+	int i;
+	DECLARE_BITMAP(used, CY_MAX_ID);
+
+	if (IS_LARGE_AREA(xy_data->tt_stat) == 1) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Large area detected\n", __func__);
+	} else if (num_tch > CY_MAX_FINGER) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__);
+	} else if (IS_BAD_PKT(xy_data->tt_mode)) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__);
+	}
+
+	cyttsp_extract_track_ids(xy_data, ids);
+
+	bitmap_zero(used, CY_MAX_ID);
+
+	for (i = 0; i < num_tch; i++) {
+		tch = cyttsp_get_tch(xy_data, i);
+
+		input_mt_slot(input, ids[i]);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+		input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x));
+		input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y));
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z);
+
+		__set_bit(ids[i], used);
+	}
+
+	for (i = 0; i < CY_MAX_ID; i++) {
+		if (test_bit(i, used))
+			continue;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+	}
+
+	input_sync(input);
+}
+
+static irqreturn_t cyttsp_irq(int irq, void *handle)
+{
+	struct cyttsp *ts = handle;
+	int error;
+
+	if (unlikely(ts->state == CY_BL_STATE)) {
+		complete(&ts->bl_ready);
+		goto out;
+	}
+
+	/* Get touch data from CYTTSP device */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				 sizeof(struct cyttsp_xydata), &ts->xy_data);
+	if (error)
+		goto out;
+
+	/* provide flow control handshake */
+	if (ts->pdata->use_hndshk) {
+		error = ttsp_send_command(ts,
+				ts->xy_data.hst_mode ^ CY_HNDSHK_BIT);
+		if (error)
+			goto out;
+	}
+
+	if (unlikely(ts->state == CY_IDLE_STATE))
+		goto out;
+
+	if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) {
+		/*
+		 * TTSP device has reset back to bootloader mode.
+		 * Restore to operational mode.
+		 */
+		error = cyttsp_exit_bl_mode(ts);
+		if (error) {
+			dev_err(ts->dev,
+				"Could not return to operational mode, err: %d\n",
+				error);
+			ts->state = CY_IDLE_STATE;
+		}
+	} else {
+		cyttsp_report_tchdata(ts);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cyttsp_power_on(struct cyttsp *ts)
+{
+	int error;
+
+	error = cyttsp_soft_reset(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) &&
+	    IS_VALID_APP(ts->bl_data.bl_status)) {
+		error = cyttsp_exit_bl_mode(ts);
+		if (error)
+			return error;
+	}
+
+	if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE ||
+	    IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) {
+		return -ENODEV;
+	}
+
+	error = cyttsp_set_sysinfo_mode(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_sysinfo_regs(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_operational_mode(ts);
+	if (error)
+		return error;
+
+	/* init active distance */
+	error = cyttsp_act_dist_setup(ts);
+	if (error)
+		return error;
+
+	ts->state = CY_ACTIVE_STATE;
+
+	return 0;
+}
+
+static int cyttsp_enable(struct cyttsp *ts)
+{
+	int error;
+
+	/*
+	 * The device firmware can wake on an I2C or SPI memory slave
+	 * address match. So just reading a register is sufficient to
+	 * wake up the device. The first read attempt will fail but it
+	 * will wake it up making the second read attempt successful.
+	 */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	if (GET_HSTMODE(ts->xy_data.hst_mode))
+		return -EIO;
+
+	enable_irq(ts->irq);
+
+	return 0;
+}
+
+static int cyttsp_disable(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_LOW_POWER_MODE);
+	if (error)
+		return error;
+
+	disable_irq(ts->irq);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cyttsp_suspend(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+	int retval = 0;
+
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->input->users) {
+		retval = cyttsp_disable(ts);
+		if (retval == 0)
+			ts->suspended = true;
+	}
+
+	mutex_unlock(&ts->input->mutex);
+
+	return retval;
+}
+
+static int cyttsp_resume(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->input->users)
+		cyttsp_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+#endif
+
+SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume);
+EXPORT_SYMBOL_GPL(cyttsp_pm_ops);
+
+static int cyttsp_open(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+	int retval = 0;
+
+	if (!ts->suspended)
+		retval = cyttsp_enable(ts);
+
+	return retval;
+}
+
+static void cyttsp_close(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+
+	if (!ts->suspended)
+		cyttsp_disable(ts);
+}
+
+struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
+			    struct device *dev, int irq, size_t xfer_buf_size)
+{
+	const struct cyttsp_platform_data *pdata = dev->platform_data;
+	struct cyttsp *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!pdata || !pdata->name || irq <= 0) {
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->dev = dev;
+	ts->input = input_dev;
+	ts->pdata = dev->platform_data;
+	ts->bus_ops = bus_ops;
+	ts->irq = irq;
+
+	init_completion(&ts->bl_ready);
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
+
+	if (pdata->init) {
+		error = pdata->init();
+		if (error) {
+			dev_err(ts->dev, "platform init failed, err: %d\n",
+				error);
+			goto err_free_mem;
+		}
+	}
+
+	input_dev->name = pdata->name;
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = bus_ops->bustype;
+	input_dev->dev.parent = ts->dev;
+
+	input_dev->open = cyttsp_open;
+	input_dev->close = cyttsp_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, pdata->maxx, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, pdata->maxy, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, CY_MAXZ, 0, 0);
+
+	input_mt_init_slots(input_dev, CY_MAX_ID);
+
+	error = request_threaded_irq(ts->irq, NULL, cyttsp_irq,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				     pdata->name, ts);
+	if (error) {
+		dev_err(ts->dev, "failed to request IRQ %d, err: %d\n",
+			ts->irq, error);
+		goto err_platform_exit;
+	}
+
+	disable_irq(ts->irq);
+
+	error = cyttsp_power_on(ts);
+	if (error)
+		goto err_free_irq;
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(ts->dev, "failed to register input device: %d\n",
+			error);
+		goto err_free_irq;
+	}
+
+	return ts;
+
+err_free_irq:
+	free_irq(ts->irq, ts);
+err_platform_exit:
+	if (pdata->exit)
+		pdata->exit();
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL_GPL(cyttsp_probe);
+
+void cyttsp_remove(struct cyttsp *ts)
+{
+	free_irq(ts->irq, ts);
+	input_unregister_device(ts->input);
+	if (ts->pdata->exit)
+		ts->pdata->exit();
+	kfree(ts);
+}
+EXPORT_SYMBOL_GPL(cyttsp_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h
new file mode 100644
index 000000000000..1aa3c6967e70
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_core.h
@@ -0,0 +1,149 @@
+/*
+ * Header file for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+
+#ifndef __CYTTSP_CORE_H__
+#define __CYTTSP_CORE_H__
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/input/cyttsp.h>
+
+#define CY_NUM_RETRY		16 /* max number of retries for read ops */
+
+struct cyttsp_tch {
+	__be16 x, y;
+	u8 z;
+} __packed;
+
+/* TrueTouch Standard Product Gen3 interface definition */
+struct cyttsp_xydata {
+	u8 hst_mode;
+	u8 tt_mode;
+	u8 tt_stat;
+	struct cyttsp_tch tch1;
+	u8 touch12_id;
+	struct cyttsp_tch tch2;
+	u8 gest_cnt;
+	u8 gest_id;
+	struct cyttsp_tch tch3;
+	u8 touch34_id;
+	struct cyttsp_tch tch4;
+	u8 tt_undef[3];
+	u8 act_dist;
+	u8 tt_reserved;
+} __packed;
+
+
+/* TTSP System Information interface definition */
+struct cyttsp_sysinfo_data {
+	u8 hst_mode;
+	u8 mfg_cmd;
+	u8 mfg_stat;
+	u8 cid[3];
+	u8 tt_undef1;
+	u8 uid[8];
+	u8 bl_verh;
+	u8 bl_verl;
+	u8 tts_verh;
+	u8 tts_verl;
+	u8 app_idh;
+	u8 app_idl;
+	u8 app_verh;
+	u8 app_verl;
+	u8 tt_undef[5];
+	u8 scn_typ;
+	u8 act_intrvl;
+	u8 tch_tmout;
+	u8 lp_intrvl;
+};
+
+/* TTSP Bootloader Register Map interface definition */
+#define CY_BL_CHKSUM_OK 0x01
+struct cyttsp_bootloader_data {
+	u8 bl_file;
+	u8 bl_status;
+	u8 bl_error;
+	u8 blver_hi;
+	u8 blver_lo;
+	u8 bld_blver_hi;
+	u8 bld_blver_lo;
+	u8 ttspver_hi;
+	u8 ttspver_lo;
+	u8 appid_hi;
+	u8 appid_lo;
+	u8 appver_hi;
+	u8 appver_lo;
+	u8 cid_0;
+	u8 cid_1;
+	u8 cid_2;
+};
+
+struct cyttsp;
+
+struct cyttsp_bus_ops {
+	u16 bustype;
+	int (*write)(struct cyttsp *ts,
+		     u8 addr, u8 length, const void *values);
+	int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values);
+};
+
+enum cyttsp_state {
+	CY_IDLE_STATE,
+	CY_ACTIVE_STATE,
+	CY_BL_STATE,
+};
+
+struct cyttsp {
+	struct device *dev;
+	int irq;
+	struct input_dev *input;
+	char phys[32];
+	const struct cyttsp_platform_data *pdata;
+	const struct cyttsp_bus_ops *bus_ops;
+	struct cyttsp_bootloader_data bl_data;
+	struct cyttsp_sysinfo_data sysinfo_data;
+	struct cyttsp_xydata xy_data;
+	struct completion bl_ready;
+	enum cyttsp_state state;
+	bool suspended;
+
+	u8 xfer_buf[] ____cacheline_aligned;
+};
+
+struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
+			    struct device *dev, int irq, size_t xfer_buf_size);
+void cyttsp_remove(struct cyttsp *ts);
+
+extern const struct dev_pm_ops cyttsp_pm_ops;
+
+#endif /* __CYTTSP_CORE_H__ */
diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c
new file mode 100644
index 000000000000..2af1d0c52bcd
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_i2c.c
@@ -0,0 +1,136 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+
+#define CY_I2C_DATA_SIZE	128
+
+static int cyttsp_i2c_read_block_data(struct cyttsp *ts,
+				      u8 addr, u8 length, void *values)
+{
+	struct i2c_client *client = to_i2c_client(ts->dev);
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = values,
+		},
+	};
+	int retval;
+
+	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (retval < 0)
+		return retval;
+
+	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
+}
+
+static int cyttsp_i2c_write_block_data(struct cyttsp *ts,
+				       u8 addr, u8 length, const void *values)
+{
+	struct i2c_client *client = to_i2c_client(ts->dev);
+	int retval;
+
+	ts->xfer_buf[0] = addr;
+	memcpy(&ts->xfer_buf[1], values, length);
+
+	retval = i2c_master_send(client, ts->xfer_buf, length + 1);
+
+	return retval < 0 ? retval : 0;
+}
+
+static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.write		= cyttsp_i2c_write_block_data,
+	.read           = cyttsp_i2c_read_block_data,
+};
+
+static int __devinit cyttsp_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct cyttsp *ts;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C functionality not Supported\n");
+		return -EIO;
+	}
+
+	ts = cyttsp_probe(&cyttsp_i2c_bus_ops, &client->dev, client->irq,
+			  CY_I2C_DATA_SIZE);
+
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+static int __devexit cyttsp_i2c_remove(struct i2c_client *client)
+{
+	struct cyttsp *ts = i2c_get_clientdata(client);
+
+	cyttsp_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id cyttsp_i2c_id[] = {
+	{ CY_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
+
+static struct i2c_driver cyttsp_i2c_driver = {
+	.driver = {
+		.name	= CY_I2C_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp_pm_ops,
+	},
+	.probe		= cyttsp_i2c_probe,
+	.remove		= __devexit_p(cyttsp_i2c_remove),
+	.id_table	= cyttsp_i2c_id,
+};
+
+module_i2c_driver(cyttsp_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("i2c:cyttsp");
diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
new file mode 100644
index 000000000000..9f263410407b
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -0,0 +1,200 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#define CY_SPI_WR_OP		0x00 /* r/~w */
+#define CY_SPI_RD_OP		0x01
+#define CY_SPI_CMD_BYTES	4
+#define CY_SPI_SYNC_BYTE	2
+#define CY_SPI_SYNC_ACK1	0x62 /* from protocol v.2 */
+#define CY_SPI_SYNC_ACK2	0x9D /* from protocol v.2 */
+#define CY_SPI_DATA_SIZE	128
+#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+#define CY_SPI_BITS_PER_WORD	8
+
+static int cyttsp_spi_xfer(struct cyttsp *ts,
+			   u8 op, u8 reg, u8 *buf, int length)
+{
+	struct spi_device *spi = to_spi_device(ts->dev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = &ts->xfer_buf[0];
+	u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE];
+	int retval;
+	int i;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_err(ts->dev, "%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE);
+
+	wr_buf[0] = 0x00; /* header byte 0 */
+	wr_buf[1] = 0xFF; /* header byte 1 */
+	wr_buf[2] = reg;  /* reg index */
+	wr_buf[3] = op;   /* r/~w */
+	if (op == CY_SPI_WR_OP)
+		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	switch (op) {
+	case CY_SPI_WR_OP:
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+		break;
+
+	case CY_SPI_RD_OP:
+		xfer[0].len = CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+		break;
+
+	default:
+		dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op);
+		return -EINVAL;
+	}
+
+	retval = spi_sync(spi, &msg);
+	if (retval < 0) {
+		dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
+	    rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
+
+		dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op);
+
+		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
+			dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < length; i++)
+			dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cyttsp_spi_read_block_data(struct cyttsp *ts,
+				      u8 addr, u8 length, void *data)
+{
+	return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length);
+}
+
+static int cyttsp_spi_write_block_data(struct cyttsp *ts,
+				       u8 addr, u8 length, const void *data)
+{
+	return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length);
+}
+
+static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.write		= cyttsp_spi_write_block_data,
+	.read		= cyttsp_spi_read_block_data,
+};
+
+static int __devinit cyttsp_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp *ts;
+	int error;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	error = spi_setup(spi);
+	if (error < 0) {
+		dev_err(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, error);
+		return error;
+	}
+
+	ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
+			  CY_SPI_DATA_BUF_SIZE * 2);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	spi_set_drvdata(spi, ts);
+
+	return 0;
+}
+
+static int __devexit cyttsp_spi_remove(struct spi_device *spi)
+{
+	struct cyttsp *ts = spi_get_drvdata(spi);
+
+	cyttsp_remove(ts);
+
+	return 0;
+}
+
+static struct spi_driver cyttsp_spi_driver = {
+	.driver = {
+		.name	= CY_SPI_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp_pm_ops,
+	},
+	.probe  = cyttsp_spi_probe,
+	.remove = __devexit_p(cyttsp_spi_remove),
+};
+
+module_spi_driver(cyttsp_spi_driver);
+
+MODULE_ALIAS("spi:cyttsp");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("spi:cyttsp");
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 1df19bb8534a..503c7096ed36 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -320,20 +320,8 @@ static struct i2c_driver eeti_ts_driver = {
 	.id_table = eeti_ts_id,
 };
 
-static int __init eeti_ts_init(void)
-{
-	return i2c_add_driver(&eeti_ts_driver);
-}
-
-static void __exit eeti_ts_exit(void)
-{
-	i2c_del_driver(&eeti_ts_driver);
-}
+module_i2c_driver(eeti_ts_driver);
 
 MODULE_DESCRIPTION("EETI Touchscreen driver");
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_LICENSE("GPL");
-
-module_init(eeti_ts_init);
-module_exit(eeti_ts_exit);
-
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index eadcc2e83c77..70524dd34f42 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -285,18 +285,7 @@ static struct i2c_driver egalax_ts_driver = {
 	.remove		= __devexit_p(egalax_ts_remove),
 };
 
-static int __init egalax_ts_init(void)
-{
-	return i2c_add_driver(&egalax_ts_driver);
-}
-
-static void __exit egalax_ts_exit(void)
-{
-	i2c_del_driver(&egalax_ts_driver);
-}
-
-module_init(egalax_ts_init);
-module_exit(egalax_ts_exit);
+module_i2c_driver(egalax_ts_driver);
 
 MODULE_AUTHOR("Freescale Semiconductor, Inc.");
 MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index 639a6044183d..85cf9bee8018 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -93,7 +93,7 @@ static int __init hp680_ts_init(void)
 	hp680_ts_dev->phys = "hp680_ts/input0";
 
 	if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
-			0, MODNAME, 0) < 0) {
+			0, MODNAME, NULL) < 0) {
 		printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
 		       HP680_TS_IRQ);
 		err = -EBUSY;
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
new file mode 100644
index 000000000000..c0044175a921
--- /dev/null
+++ b/drivers/input/touchscreen/ili210x.c
@@ -0,0 +1,360 @@
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/input/ili210x.h>
+
+#define MAX_TOUCHES		2
+#define DEFAULT_POLL_PERIOD	20
+
+/* Touchscreen commands */
+#define REG_TOUCHDATA		0x10
+#define REG_PANEL_INFO		0x20
+#define REG_FIRMWARE_VERSION	0x40
+#define REG_CALIBRATE		0xcc
+
+struct finger {
+	u8 x_low;
+	u8 x_high;
+	u8 y_low;
+	u8 y_high;
+} __packed;
+
+struct touchdata {
+	u8 status;
+	struct finger finger[MAX_TOUCHES];
+} __packed;
+
+struct panel_info {
+	struct finger finger_max;
+	u8 xchannel_num;
+	u8 ychannel_num;
+} __packed;
+
+struct firmware_version {
+	u8 id;
+	u8 major;
+	u8 minor;
+} __packed;
+
+struct ili210x {
+	struct i2c_client *client;
+	struct input_dev *input;
+	bool (*get_pendown_state)(void);
+	unsigned int poll_period;
+	struct delayed_work dwork;
+};
+
+static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf,
+			    size_t len)
+{
+	struct i2c_msg msg[2] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &reg,
+		},
+		{
+			.addr	= client->addr,
+			.flags	= I2C_M_RD,
+			.len	= len,
+			.buf	= buf,
+		}
+	};
+
+	if (i2c_transfer(client->adapter, msg, 2) != 2) {
+		dev_err(&client->dev, "i2c transfer failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void ili210x_report_events(struct input_dev *input,
+				  const struct touchdata *touchdata)
+{
+	int i;
+	bool touch;
+	unsigned int x, y;
+	const struct finger *finger;
+
+	for (i = 0; i < MAX_TOUCHES; i++) {
+		input_mt_slot(input, i);
+
+		finger = &touchdata->finger[i];
+
+		touch = touchdata->status & (1 << i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+		if (touch) {
+			x = finger->x_low | (finger->x_high << 8);
+			y = finger->y_low | (finger->y_high << 8);
+
+			input_report_abs(input, ABS_MT_POSITION_X, x);
+			input_report_abs(input, ABS_MT_POSITION_Y, y);
+		}
+	}
+
+	input_mt_report_pointer_emulation(input, false);
+	input_sync(input);
+}
+
+static bool get_pendown_state(const struct ili210x *priv)
+{
+	bool state = false;
+
+	if (priv->get_pendown_state)
+		state = priv->get_pendown_state();
+
+	return state;
+}
+
+static void ili210x_work(struct work_struct *work)
+{
+	struct ili210x *priv = container_of(work, struct ili210x,
+					    dwork.work);
+	struct i2c_client *client = priv->client;
+	struct touchdata touchdata;
+	int error;
+
+	error = ili210x_read_reg(client, REG_TOUCHDATA,
+				 &touchdata, sizeof(touchdata));
+	if (error) {
+		dev_err(&client->dev,
+			"Unable to get touchdata, err = %d\n", error);
+		return;
+	}
+
+	ili210x_report_events(priv->input, &touchdata);
+
+	if ((touchdata.status & 0xf3) || get_pendown_state(priv))
+		schedule_delayed_work(&priv->dwork,
+				      msecs_to_jiffies(priv->poll_period));
+}
+
+static irqreturn_t ili210x_irq(int irq, void *irq_data)
+{
+	struct ili210x *priv = irq_data;
+
+	schedule_delayed_work(&priv->dwork, 0);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t ili210x_calibrate(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ili210x *priv = i2c_get_clientdata(client);
+	unsigned long calibrate;
+	int rc;
+	u8 cmd = REG_CALIBRATE;
+
+	if (kstrtoul(buf, 10, &calibrate))
+		return -EINVAL;
+
+	if (calibrate > 1)
+		return -EINVAL;
+
+	if (calibrate) {
+		rc = i2c_master_send(priv->client, &cmd, sizeof(cmd));
+		if (rc != sizeof(cmd))
+			return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(calibrate, 0644, NULL, ili210x_calibrate);
+
+static struct attribute *ili210x_attributes[] = {
+	&dev_attr_calibrate.attr,
+	NULL,
+};
+
+static const struct attribute_group ili210x_attr_group = {
+	.attrs = ili210x_attributes,
+};
+
+static int __devinit ili210x_i2c_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	const struct ili210x_platform_data *pdata = dev->platform_data;
+	struct ili210x *priv;
+	struct input_dev *input;
+	struct panel_info panel;
+	struct firmware_version firmware;
+	int xmax, ymax;
+	int error;
+
+	dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
+
+	if (!pdata) {
+		dev_err(dev, "No platform data!\n");
+		return -EINVAL;
+	}
+
+	if (client->irq <= 0) {
+		dev_err(dev, "No IRQ!\n");
+		return -EINVAL;
+	}
+
+	/* Get firmware version */
+	error = ili210x_read_reg(client, REG_FIRMWARE_VERSION,
+				 &firmware, sizeof(firmware));
+	if (error) {
+		dev_err(dev, "Failed to get firmware version, err: %d\n",
+			error);
+		return error;
+	}
+
+	/* get panel info */
+	error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
+	if (error) {
+		dev_err(dev, "Failed to get panel informations, err: %d\n",
+			error);
+		return error;
+	}
+
+	xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8);
+	ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8);
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!priv || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	priv->client = client;
+	priv->input = input;
+	priv->get_pendown_state = pdata->get_pendown_state;
+	priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD;
+	INIT_DELAYED_WORK(&priv->dwork, ili210x_work);
+
+	/* Setup input device */
+	input->name = "ILI210x Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = dev;
+
+	__set_bit(EV_SYN, input->evbit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(BTN_TOUCH, input->keybit);
+
+	/* Single touch */
+	input_set_abs_params(input, ABS_X, 0, xmax, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0);
+
+	/* Multi touch */
+	input_mt_init_slots(input, MAX_TOUCHES);
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
+
+	input_set_drvdata(input, priv);
+	i2c_set_clientdata(client, priv);
+
+	error = request_irq(client->irq, ili210x_irq, pdata->irq_flags,
+			    client->name, priv);
+	if (error) {
+		dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
+			error);
+		goto err_free_mem;
+	}
+
+	error = sysfs_create_group(&dev->kobj, &ili210x_attr_group);
+	if (error) {
+		dev_err(dev, "Unable to create sysfs attributes, err: %d\n",
+			error);
+		goto err_free_irq;
+	}
+
+	error = input_register_device(priv->input);
+	if (error) {
+		dev_err(dev, "Cannot regiser input device, err: %d\n", error);
+		goto err_remove_sysfs;
+	}
+
+	device_init_wakeup(&client->dev, 1);
+
+	dev_dbg(dev,
+		"ILI210x initialized (IRQ: %d), firmware version %d.%d.%d",
+		client->irq, firmware.id, firmware.major, firmware.minor);
+
+	return 0;
+
+err_remove_sysfs:
+	sysfs_remove_group(&dev->kobj, &ili210x_attr_group);
+err_free_irq:
+	free_irq(client->irq, priv);
+err_free_mem:
+	input_free_device(input);
+	kfree(priv);
+	return error;
+}
+
+static int __devexit ili210x_i2c_remove(struct i2c_client *client)
+{
+	struct ili210x *priv = i2c_get_clientdata(client);
+
+	sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group);
+	free_irq(priv->client->irq, priv);
+	cancel_delayed_work_sync(&priv->dwork);
+	input_unregister_device(priv->input);
+	kfree(priv);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ili210x_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int ili210x_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm,
+			 ili210x_i2c_suspend, ili210x_i2c_resume);
+
+static const struct i2c_device_id ili210x_i2c_id[] = {
+	{ "ili210x", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id);
+
+static struct i2c_driver ili210x_ts_driver = {
+	.driver = {
+		.name = "ili210x_i2c",
+		.owner = THIS_MODULE,
+		.pm = &ili210x_i2c_pm,
+	},
+	.id_table = ili210x_i2c_id,
+	.probe = ili210x_i2c_probe,
+	.remove = __devexit_p(ili210x_i2c_remove),
+};
+
+module_i2c_driver(ili210x_ts_driver);
+
+MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>");
+MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index c3848ad2325b..d9be6eac99b1 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 #include <mach/jornada720.h>
+#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c
index 4627fe55b401..4eab50b856d7 100644
--- a/drivers/input/touchscreen/max11801_ts.c
+++ b/drivers/input/touchscreen/max11801_ts.c
@@ -255,18 +255,7 @@ static struct i2c_driver max11801_ts_driver = {
 	.remove		= __devexit_p(max11801_ts_remove),
 };
 
-static int __init max11801_ts_init(void)
-{
-	return i2c_add_driver(&max11801_ts_driver);
-}
-
-static void __exit max11801_ts_exit(void)
-{
-	i2c_del_driver(&max11801_ts_driver);
-}
-
-module_init(max11801_ts_init);
-module_exit(max11801_ts_exit);
+module_i2c_driver(max11801_ts_driver);
 
 MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
 MODULE_DESCRIPTION("Touchscreen driver for MAXI MAX11801 controller");
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index ede02743eac1..48dc5b0d26f1 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -39,6 +39,7 @@ struct mc13783_ts_priv {
 	struct delayed_work work;
 	struct workqueue_struct *workq;
 	unsigned int sample[4];
+	struct mc13xxx_ts_platform_data *touch;
 };
 
 static irqreturn_t mc13783_ts_handler(int irq, void *data)
@@ -125,7 +126,9 @@ static void mc13783_ts_work(struct work_struct *work)
 	unsigned int channel = 12;
 
 	if (mc13xxx_adc_do_conversion(priv->mc13xxx,
-				mode, channel, priv->sample) == 0)
+				mode, channel,
+				priv->touch->ato, priv->touch->atox,
+				priv->sample) == 0)
 		mc13783_ts_report_sample(priv);
 }
 
@@ -179,6 +182,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
 	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
 	priv->idev = idev;
+	priv->touch = dev_get_platdata(&pdev->dev);
+	if (!priv->touch) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
 
 	/*
 	 * We need separate workqueue because mc13783_adc_do_conversion
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index 2d84c80ceb66..b528511861ce 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -302,18 +302,7 @@ static struct i2c_driver mcs5000_ts_driver = {
 	.id_table	= mcs5000_ts_id,
 };
 
-static int __init mcs5000_ts_init(void)
-{
-	return i2c_add_driver(&mcs5000_ts_driver);
-}
-
-static void __exit mcs5000_ts_exit(void)
-{
-	i2c_del_driver(&mcs5000_ts_driver);
-}
-
-module_init(mcs5000_ts_init);
-module_exit(mcs5000_ts_exit);
+module_i2c_driver(mcs5000_ts_driver);
 
 /* Module information */
 MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
index 5226194aa78e..c038db93e2c3 100644
--- a/drivers/input/touchscreen/migor_ts.c
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -242,19 +242,8 @@ static struct i2c_driver migor_ts_driver = {
 	.id_table = migor_ts_id,
 };
 
-static int __init migor_ts_init(void)
-{
-	return i2c_add_driver(&migor_ts_driver);
-}
-
-static void __exit migor_ts_exit(void)
-{
-	i2c_del_driver(&migor_ts_driver);
-}
+module_i2c_driver(migor_ts_driver);
 
 MODULE_DESCRIPTION("MigoR Touchscreen driver");
 MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
 MODULE_LICENSE("GPL");
-
-module_init(migor_ts_init);
-module_exit(migor_ts_exit);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index d5ac09a1ee56..72f6ba3a4709 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -222,17 +222,7 @@ static struct i2c_driver pixcir_i2c_ts_driver = {
 	.id_table	= pixcir_i2c_ts_id,
 };
 
-static int __init pixcir_i2c_ts_init(void)
-{
-	return i2c_add_driver(&pixcir_i2c_ts_driver);
-}
-module_init(pixcir_i2c_ts_init);
-
-static void __exit pixcir_i2c_ts_exit(void)
-{
-	i2c_del_driver(&pixcir_i2c_ts_driver);
-}
-module_exit(pixcir_i2c_ts_exit);
+module_i2c_driver(pixcir_i2c_ts_driver);
 
 MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>");
 MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver");
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 8825fe37d433..cbbf71b22696 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -268,17 +268,7 @@ static struct i2c_driver st1232_ts_driver = {
 	},
 };
 
-static int __init st1232_ts_init(void)
-{
-	return i2c_add_driver(&st1232_ts_driver);
-}
-module_init(st1232_ts_init);
-
-static void __exit st1232_ts_exit(void)
-{
-	i2c_del_driver(&st1232_ts_driver);
-}
-module_exit(st1232_ts_exit);
+module_i2c_driver(st1232_ts_driver);
 
 MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>");
 MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c
new file mode 100644
index 000000000000..d229c741d544
--- /dev/null
+++ b/drivers/input/touchscreen/ti_tscadc.c
@@ -0,0 +1,486 @@
+/*
+ * TI Touch Screen driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input/ti_tscadc.h>
+#include <linux/delay.h>
+
+#define REG_IRQEOI		0x020
+#define REG_RAWIRQSTATUS	0x024
+#define REG_IRQSTATUS		0x028
+#define REG_IRQENABLE		0x02C
+#define REG_IRQWAKEUP		0x034
+#define REG_CTRL		0x040
+#define REG_ADCFSM		0x044
+#define REG_CLKDIV		0x04C
+#define REG_SE			0x054
+#define REG_IDLECONFIG		0x058
+#define REG_CHARGECONFIG	0x05C
+#define REG_CHARGEDELAY		0x060
+#define REG_STEPCONFIG(n)	(0x64 + ((n - 1) * 8))
+#define REG_STEPDELAY(n)	(0x68 + ((n - 1) * 8))
+#define REG_STEPCONFIG13	0x0C4
+#define REG_STEPDELAY13		0x0C8
+#define REG_STEPCONFIG14	0x0CC
+#define REG_STEPDELAY14		0x0D0
+#define REG_FIFO0CNT		0xE4
+#define REG_FIFO1THR		0xF4
+#define REG_FIFO0		0x100
+#define REG_FIFO1		0x200
+
+/*	Register Bitfields	*/
+#define IRQWKUP_ENB		BIT(0)
+#define STPENB_STEPENB		0x7FFF
+#define IRQENB_FIFO1THRES	BIT(5)
+#define IRQENB_PENUP		BIT(9)
+#define STEPCONFIG_MODE_HWSYNC	0x2
+#define STEPCONFIG_SAMPLES_AVG	(1 << 4)
+#define STEPCONFIG_XPP		(1 << 5)
+#define STEPCONFIG_XNN		(1 << 6)
+#define STEPCONFIG_YPP		(1 << 7)
+#define STEPCONFIG_YNN		(1 << 8)
+#define STEPCONFIG_XNP		(1 << 9)
+#define STEPCONFIG_YPN		(1 << 10)
+#define STEPCONFIG_INM		(1 << 18)
+#define STEPCONFIG_INP		(1 << 20)
+#define STEPCONFIG_INP_5	(1 << 21)
+#define STEPCONFIG_FIFO1	(1 << 26)
+#define STEPCONFIG_OPENDLY	0xff
+#define STEPCONFIG_Z1		(3 << 19)
+#define STEPIDLE_INP		(1 << 22)
+#define STEPCHARGE_RFP		(1 << 12)
+#define STEPCHARGE_INM		(1 << 15)
+#define STEPCHARGE_INP		(1 << 19)
+#define STEPCHARGE_RFM		(1 << 23)
+#define STEPCHARGE_DELAY	0x1
+#define CNTRLREG_TSCSSENB	(1 << 0)
+#define CNTRLREG_STEPID		(1 << 1)
+#define CNTRLREG_STEPCONFIGWRT	(1 << 2)
+#define CNTRLREG_4WIRE		(1 << 5)
+#define CNTRLREG_5WIRE		(1 << 6)
+#define CNTRLREG_8WIRE		(3 << 5)
+#define CNTRLREG_TSCENB		(1 << 7)
+#define ADCFSM_STEPID		0x10
+
+#define SEQ_SETTLE		275
+#define ADC_CLK			3000000
+#define MAX_12BIT		((1 << 12) - 1)
+#define TSCADC_DELTA_X		15
+#define TSCADC_DELTA_Y		15
+
+struct tscadc {
+	struct input_dev	*input;
+	struct clk		*tsc_ick;
+	void __iomem		*tsc_base;
+	unsigned int		irq;
+	unsigned int		wires;
+	unsigned int		x_plate_resistance;
+	bool			pen_down;
+};
+
+static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg)
+{
+	return readl(ts->tsc_base + reg);
+}
+
+static void tscadc_writel(struct tscadc *tsc, unsigned int reg,
+					unsigned int val)
+{
+	writel(val, tsc->tsc_base + reg);
+}
+
+static void tscadc_step_config(struct tscadc *ts_dev)
+{
+	unsigned int	config;
+	int i;
+
+	/* Configure the Step registers */
+
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= STEPCONFIG_INP | STEPCONFIG_XNN;
+		break;
+	case 5:
+		config |= STEPCONFIG_YNN |
+				STEPCONFIG_INP_5 | STEPCONFIG_XNN |
+				STEPCONFIG_YPP;
+		break;
+	case 8:
+		config |= STEPCONFIG_INP | STEPCONFIG_XNN;
+		break;
+	}
+
+	for (i = 1; i < 7; i++) {
+		tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	config = 0;
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN |
+			STEPCONFIG_INM | STEPCONFIG_FIFO1;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= STEPCONFIG_YPP;
+		break;
+	case 5:
+		config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 |
+				STEPCONFIG_XNP | STEPCONFIG_YPN;
+		break;
+	case 8:
+		config |= STEPCONFIG_YPP;
+		break;
+	}
+
+	for (i = 7; i < 13; i++) {
+		tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	config = 0;
+	/* Charge step configuration */
+	config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+			STEPCHARGE_RFP | STEPCHARGE_RFM |
+			STEPCHARGE_INM | STEPCHARGE_INP;
+
+	tscadc_writel(ts_dev, REG_CHARGECONFIG, config);
+	tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY);
+
+	config = 0;
+	/* Configure to calculate pressure */
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP |
+			STEPCONFIG_XNN | STEPCONFIG_INM;
+	tscadc_writel(ts_dev, REG_STEPCONFIG13, config);
+	tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY);
+
+	config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1;
+	tscadc_writel(ts_dev, REG_STEPCONFIG14, config);
+	tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY);
+
+	tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
+}
+
+static void tscadc_idle_config(struct tscadc *ts_config)
+{
+	unsigned int idleconfig;
+
+	idleconfig = STEPCONFIG_YNN |
+			STEPCONFIG_INM |
+			STEPCONFIG_YPN | STEPIDLE_INP;
+	tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig);
+}
+
+static void tscadc_read_coordinates(struct tscadc *ts_dev,
+				    unsigned int *x, unsigned int *y)
+{
+	unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT);
+	unsigned int prev_val_x = ~0, prev_val_y = ~0;
+	unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
+	unsigned int read, diff;
+	unsigned int i;
+
+	/*
+	 * Delta filter is used to remove large variations in sampled
+	 * values from ADC. The filter tries to predict where the next
+	 * coordinate could be. This is done by taking a previous
+	 * coordinate and subtracting it form current one. Further the
+	 * algorithm compares the difference with that of a present value,
+	 * if true the value is reported to the sub system.
+	 */
+	for (i = 0; i < fifocount - 1; i++) {
+		read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
+		diff = abs(read - prev_val_x);
+		if (diff < prev_diff_x) {
+			prev_diff_x = diff;
+			*x = read;
+		}
+		prev_val_x = read;
+
+		read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
+		diff = abs(read - prev_val_y);
+		if (diff < prev_diff_y) {
+			prev_diff_y = diff;
+			*y = read;
+		}
+		prev_val_y = read;
+	}
+}
+
+static irqreturn_t tscadc_irq(int irq, void *dev)
+{
+	struct tscadc *ts_dev = dev;
+	struct input_dev *input_dev = ts_dev->input;
+	unsigned int status, irqclr = 0;
+	unsigned int x = 0, y = 0;
+	unsigned int z1, z2, z;
+	unsigned int fsm;
+
+	status = tscadc_readl(ts_dev, REG_IRQSTATUS);
+	if (status & IRQENB_FIFO1THRES) {
+		tscadc_read_coordinates(ts_dev, &x, &y);
+
+		z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
+		z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
+
+		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
+			/*
+			 * Calculate pressure using formula
+			 * Resistance(touch) = x plate resistance *
+			 * x postion/4096 * ((z2 / z1) - 1)
+			 */
+			z = z2 - z1;
+			z *= x;
+			z *= ts_dev->x_plate_resistance;
+			z /= z1;
+			z = (z + 2047) >> 12;
+
+			if (z <= MAX_12BIT) {
+				input_report_abs(input_dev, ABS_X, x);
+				input_report_abs(input_dev, ABS_Y, y);
+				input_report_abs(input_dev, ABS_PRESSURE, z);
+				input_report_key(input_dev, BTN_TOUCH, 1);
+				input_sync(input_dev);
+			}
+		}
+		irqclr |= IRQENB_FIFO1THRES;
+	}
+
+	/*
+	 * Time for sequencer to settle, to read
+	 * correct state of the sequencer.
+	 */
+	udelay(SEQ_SETTLE);
+
+	status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS);
+	if (status & IRQENB_PENUP) {
+		/* Pen up event */
+		fsm = tscadc_readl(ts_dev, REG_ADCFSM);
+		if (fsm == ADCFSM_STEPID) {
+			ts_dev->pen_down = false;
+			input_report_key(input_dev, BTN_TOUCH, 0);
+			input_report_abs(input_dev, ABS_PRESSURE, 0);
+			input_sync(input_dev);
+		} else {
+			ts_dev->pen_down = true;
+		}
+		irqclr |= IRQENB_PENUP;
+	}
+
+	tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+	/* check pending interrupts */
+	tscadc_writel(ts_dev, REG_IRQEOI, 0x0);
+
+	tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
+	return IRQ_HANDLED;
+}
+
+/*
+ * The functions for inserting/removing driver as a module.
+ */
+
+static int __devinit tscadc_probe(struct platform_device *pdev)
+{
+	const struct tsc_data *pdata = pdev->dev.platform_data;
+	struct resource *res;
+	struct tscadc *ts_dev;
+	struct input_dev *input_dev;
+	struct clk *clk;
+	int err;
+	int clk_value, ctrl, irq;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "missing platform data.\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no memory resource defined.\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq ID is specified.\n");
+		return -EINVAL;
+	}
+
+	/* Allocate memory for device */
+	ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts_dev || !input_dev) {
+		dev_err(&pdev->dev, "failed to allocate memory.\n");
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts_dev->input = input_dev;
+	ts_dev->irq = irq;
+	ts_dev->wires = pdata->wires;
+	ts_dev->x_plate_resistance = pdata->x_plate_resistance;
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to reserve registers.\n");
+		err = -EBUSY;
+		goto err_free_mem;
+	}
+
+	ts_dev->tsc_base = ioremap(res->start, resource_size(res));
+	if (!ts_dev->tsc_base) {
+		dev_err(&pdev->dev, "failed to map registers.\n");
+		err = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	err = request_irq(ts_dev->irq, tscadc_irq,
+			  0, pdev->dev.driver->name, ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to allocate irq.\n");
+		goto err_unmap_regs;
+	}
+
+	ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick");
+	if (IS_ERR(ts_dev->tsc_ick)) {
+		dev_err(&pdev->dev, "failed to get TSC ick\n");
+		goto err_free_irq;
+	}
+	clk_enable(ts_dev->tsc_ick);
+
+	clk = clk_get(&pdev->dev, "adc_tsc_fck");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get TSC fck\n");
+		err = PTR_ERR(clk);
+		goto err_disable_clk;
+	}
+
+	clk_value = clk_get_rate(clk) / ADC_CLK;
+	clk_put(clk);
+
+	if (clk_value < 7) {
+		dev_err(&pdev->dev, "clock input less than min clock requirement\n");
+		goto err_disable_clk;
+	}
+	/* CLKDIV needs to be configured to the value minus 1 */
+	tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1);
+
+	 /* Enable wake-up of the SoC using touchscreen */
+	tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
+
+	ctrl = CNTRLREG_STEPCONFIGWRT |
+			CNTRLREG_TSCENB |
+			CNTRLREG_STEPID;
+	switch (ts_dev->wires) {
+	case 4:
+		ctrl |= CNTRLREG_4WIRE;
+		break;
+	case 5:
+		ctrl |= CNTRLREG_5WIRE;
+		break;
+	case 8:
+		ctrl |= CNTRLREG_8WIRE;
+		break;
+	}
+	tscadc_writel(ts_dev, REG_CTRL, ctrl);
+
+	tscadc_idle_config(ts_dev);
+	tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
+	tscadc_step_config(ts_dev);
+	tscadc_writel(ts_dev, REG_FIFO1THR, 6);
+
+	ctrl |= CNTRLREG_TSCSSENB;
+	tscadc_writel(ts_dev, REG_CTRL, ctrl);
+
+	input_dev->name = "ti-tsc-adc";
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+
+	/* register to the input system */
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_disable_clk;
+
+	platform_set_drvdata(pdev, ts_dev);
+	return 0;
+
+err_disable_clk:
+	clk_disable(ts_dev->tsc_ick);
+	clk_put(ts_dev->tsc_ick);
+err_free_irq:
+	free_irq(ts_dev->irq, ts_dev);
+err_unmap_regs:
+	iounmap(ts_dev->tsc_base);
+err_release_mem_region:
+	release_mem_region(res->start, resource_size(res));
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts_dev);
+	return err;
+}
+
+static int __devexit tscadc_remove(struct platform_device *pdev)
+{
+	struct tscadc *ts_dev = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	free_irq(ts_dev->irq, ts_dev);
+
+	input_unregister_device(ts_dev->input);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap(ts_dev->tsc_base);
+	release_mem_region(res->start, resource_size(res));
+
+	clk_disable(ts_dev->tsc_ick);
+	clk_put(ts_dev->tsc_ick);
+
+	kfree(ts_dev);
+
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver ti_tsc_driver = {
+	.probe	= tscadc_probe,
+	.remove	= __devexit_p(tscadc_remove),
+	.driver	= {
+		.name   = "tsc",
+		.owner	= THIS_MODULE,
+	},
+};
+module_platform_driver(ti_tsc_driver);
+
+MODULE_DESCRIPTION("TI touchscreen controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index 067d95662997..b6adeaee9cc5 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -747,17 +747,7 @@ static struct spi_driver tsc2005_driver = {
 	.remove	= __devexit_p(tsc2005_remove),
 };
 
-static int __init tsc2005_init(void)
-{
-	return spi_register_driver(&tsc2005_driver);
-}
-module_init(tsc2005_init);
-
-static void __exit tsc2005_exit(void)
-{
-	spi_unregister_driver(&tsc2005_driver);
-}
-module_exit(tsc2005_exit);
+module_spi_driver(tsc2005_driver);
 
 MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
 MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 1f674cb6c55b..1473d2382afd 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -399,18 +399,7 @@ static struct i2c_driver tsc2007_driver = {
 	.remove		= __devexit_p(tsc2007_remove),
 };
 
-static int __init tsc2007_init(void)
-{
-	return i2c_add_driver(&tsc2007_driver);
-}
-
-static void __exit tsc2007_exit(void)
-{
-	i2c_del_driver(&tsc2007_driver);
-}
-
-module_init(tsc2007_init);
-module_exit(tsc2007_exit);
+module_i2c_driver(tsc2007_driver);
 
 MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>");
 MODULE_DESCRIPTION("TSC2007 TouchScreen Driver");
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 3a5ebf452e81..22cd96f58c99 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -17,6 +17,7 @@
  *  - Zytronic capacitive touchscreen
  *  - NEXIO/iNexio
  *  - Elo TouchSystems 2700 IntelliTouch
+ *  - EasyTouch USB Dual/Multi touch controller from Data Modul
  *
  * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -140,6 +141,7 @@ enum {
 	DEVTYPE_TC45USB,
 	DEVTYPE_NEXIO,
 	DEVTYPE_ELO,
+	DEVTYPE_ETOUCH,
 };
 
 #define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -245,6 +247,10 @@ static const struct usb_device_id usbtouch_devices[] = {
 	{USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO},
 #endif
 
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+	{USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH},
+#endif
+
 	{}
 };
 
@@ -326,6 +332,51 @@ static int egalax_get_pkt_len(unsigned char *buf, int len)
 }
 #endif
 
+/*****************************************************************************
+ * EasyTouch part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+
+#define ETOUCH_PKT_TYPE_MASK		0xFE
+#define ETOUCH_PKT_TYPE_REPT		0x80
+#define ETOUCH_PKT_TYPE_REPT2		0xB0
+#define ETOUCH_PKT_TYPE_DIAG		0x0A
+
+static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT &&
+		(pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2)
+		return 0;
+
+	dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F);
+	dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+
+static int etouch_get_pkt_len(unsigned char *buf, int len)
+{
+	switch (buf[0] & ETOUCH_PKT_TYPE_MASK) {
+	case ETOUCH_PKT_TYPE_REPT:
+	case ETOUCH_PKT_TYPE_REPT2:
+		return 5;
+
+	case ETOUCH_PKT_TYPE_DIAG:
+		if (len < 2)
+			return -1;
+
+		return buf[1] + 2;
+	}
+
+	return 0;
+}
+#endif
 
 /*****************************************************************************
  * PanJit Part
@@ -1175,6 +1226,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.exit		= nexio_exit,
 	},
 #endif
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+	[DEVTYPE_ETOUCH] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 16,
+		.process_pkt	= usbtouch_process_multi,
+		.get_pkt_len	= etouch_get_pkt_len,
+		.read_data	= etouch_read_data,
+	},
+#endif
 };