Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 344 insertions, 0 deletions

diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
new file mode 100644
index 000000000000..f410f628a3e2
--- /dev/null
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -0,0 +1,344 @@
+/* $Id: bkm_a4t.c,v 1.22.2.4 2004/01/14 16:04:48 keil Exp $
+ *
+ * low level stuff for T-Berkom A4T
+ *
+ * Author       Roland Klabunde
+ * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "hisax.h"
+#include "isac.h"
+#include "hscx.h"
+#include "jade.h"
+#include "isdnl1.h"
+#include <linux/pci.h>
+#include "bkm_ax.h"
+
+extern const char *CardType[];
+
+const char *bkm_a4t_revision = "$Revision: 1.22.2.4 $";
+
+
+static inline u_char
+readreg(unsigned int ale, unsigned long adr, u_char off)
+{
+	register u_int ret;
+	unsigned int *po = (unsigned int *) adr;	/* Postoffice */
+
+	*po = (GCS_2 | PO_WRITE | off);
+	__WAITI20__(po);
+	*po = (ale | PO_READ);
+	__WAITI20__(po);
+	ret = *po;
+	return ((unsigned char) ret);
+}
+
+
+static inline void
+readfifo(unsigned int ale, unsigned long adr, u_char off, u_char * data, int size)
+{
+	int i;
+	for (i = 0; i < size; i++)
+		*data++ = readreg(ale, adr, off);
+}
+
+
+static inline void
+writereg(unsigned int ale, unsigned long adr, u_char off, u_char data)
+{
+	unsigned int *po = (unsigned int *) adr;	/* Postoffice */
+	*po = (GCS_2 | PO_WRITE | off);
+	__WAITI20__(po);
+	*po = (ale | PO_WRITE | data);
+	__WAITI20__(po);
+}
+
+
+static inline void
+writefifo(unsigned int ale, unsigned long adr, u_char off, u_char * data, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		writereg(ale, adr, off, *data++);
+}
+
+
+/* Interface functions */
+
+static u_char
+ReadISAC(struct IsdnCardState *cs, u_char offset)
+{
+	return (readreg(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, offset));
+}
+
+static void
+WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
+{
+	writereg(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, offset, value);
+}
+
+static void
+ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+{
+	readfifo(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, 0, data, size);
+}
+
+static void
+WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+{
+	writefifo(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, 0, data, size);
+}
+
+static u_char
+ReadJADE(struct IsdnCardState *cs, int jade, u_char offset)
+{
+	return (readreg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, offset + (jade == -1 ? 0 : (jade ? 0xC0 : 0x80))));
+}
+
+static void
+WriteJADE(struct IsdnCardState *cs, int jade, u_char offset, u_char value)
+{
+	writereg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, offset + (jade == -1 ? 0 : (jade ? 0xC0 : 0x80)), value);
+}
+
+/*
+ * fast interrupt JADE stuff goes here
+ */
+
+#define READJADE(cs, nr, reg) readreg(cs->hw.ax.jade_ale,\
+ 		cs->hw.ax.jade_adr, reg + (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)))
+#define WRITEJADE(cs, nr, reg, data) writereg(cs->hw.ax.jade_ale,\
+ 		cs->hw.ax.jade_adr, reg + (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)), data)
+
+#define READJADEFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.jade_ale,\
+		cs->hw.ax.jade_adr, (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)), ptr, cnt)
+#define WRITEJADEFIFO(cs, nr, ptr, cnt) writefifo( cs->hw.ax.jade_ale,\
+		cs->hw.ax.jade_adr, (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)), ptr, cnt)
+
+#include "jade_irq.c"
+
+static irqreturn_t
+bkm_interrupt(int intno, void *dev_id, struct pt_regs *regs)
+{
+	struct IsdnCardState *cs = dev_id;
+	u_char val = 0;
+	u_long flags;
+	I20_REGISTER_FILE *pI20_Regs;
+
+	spin_lock_irqsave(&cs->lock, flags);
+	pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
+
+	/* ISDN interrupt pending? */
+	if (pI20_Regs->i20IntStatus & intISDN) {
+		/* Reset the ISDN interrupt     */
+		pI20_Regs->i20IntStatus = intISDN;
+		/* Disable ISDN interrupt */
+		pI20_Regs->i20IntCtrl &= ~intISDN;
+		/* Channel A first */
+		val = readreg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, jade_HDLC_ISR + 0x80);
+		if (val) {
+			jade_int_main(cs, val, 0);
+		}
+		/* Channel B  */
+		val = readreg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, jade_HDLC_ISR + 0xC0);
+		if (val) {
+			jade_int_main(cs, val, 1);
+		}
+		/* D-Channel */
+		val = readreg(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, ISAC_ISTA);
+		if (val) {
+			isac_interrupt(cs, val);
+		}
+		/* Reenable ISDN interrupt */
+		pI20_Regs->i20IntCtrl |= intISDN;
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return IRQ_HANDLED;
+	} else {
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return IRQ_NONE;
+	}
+}
+
+void
+release_io_bkm(struct IsdnCardState *cs)
+{
+	if (cs->hw.ax.base) {
+		iounmap((void *) cs->hw.ax.base);
+		cs->hw.ax.base = 0;
+	}
+}
+
+static void
+enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
+{
+	if (cs->typ == ISDN_CTYPE_BKM_A4T) {
+		I20_REGISTER_FILE *pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
+		if (bEnable)
+			pI20_Regs->i20IntCtrl |= (intISDN | intPCI);
+		else
+			/* CAUTION: This disables the video capture driver too */
+			pI20_Regs->i20IntCtrl &= ~(intISDN | intPCI);
+	}
+}
+
+static void
+reset_bkm(struct IsdnCardState *cs)
+{
+	if (cs->typ == ISDN_CTYPE_BKM_A4T) {
+		I20_REGISTER_FILE *pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
+		/* Issue the I20 soft reset     */
+		pI20_Regs->i20SysControl = 0xFF;	/* all in */
+		mdelay(10);
+		/* Remove the soft reset */
+		pI20_Regs->i20SysControl = sysRESET | 0xFF;
+		mdelay(10);
+		/* Set our configuration */
+		pI20_Regs->i20SysControl = sysRESET | sysCFG;
+		/* Issue ISDN reset     */
+		pI20_Regs->i20GuestControl = guestWAIT_CFG |
+		    g_A4T_JADE_RES |
+		    g_A4T_ISAR_RES |
+		    g_A4T_ISAC_RES |
+		    g_A4T_JADE_BOOTR |
+		    g_A4T_ISAR_BOOTR;
+		mdelay(10);
+
+		/* Remove RESET state from ISDN */
+		pI20_Regs->i20GuestControl &= ~(g_A4T_ISAC_RES |
+						g_A4T_JADE_RES |
+						g_A4T_ISAR_RES);
+		mdelay(10);
+	}
+}
+
+static int
+BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
+{
+	u_long flags;
+
+	switch (mt) {
+		case CARD_RESET:
+			/* Disable ints */
+			spin_lock_irqsave(&cs->lock, flags);
+			enable_bkm_int(cs, 0);
+			reset_bkm(cs);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			return (0);
+		case CARD_RELEASE:
+			/* Sanity */
+			spin_lock_irqsave(&cs->lock, flags);
+			enable_bkm_int(cs, 0);
+			reset_bkm(cs);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			release_io_bkm(cs);
+			return (0);
+		case CARD_INIT:
+			spin_lock_irqsave(&cs->lock, flags);
+			clear_pending_isac_ints(cs);
+			clear_pending_jade_ints(cs);
+			initisac(cs);
+			initjade(cs);
+			/* Enable ints */
+			enable_bkm_int(cs, 1);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			return (0);
+		case CARD_TEST:
+			return (0);
+	}
+	return (0);
+}
+
+static struct pci_dev *dev_a4t __initdata = NULL;
+
+int __init
+setup_bkm_a4t(struct IsdnCard *card)
+{
+	struct IsdnCardState *cs = card->cs;
+	char tmp[64];
+	u_int pci_memaddr = 0, found = 0;
+	I20_REGISTER_FILE *pI20_Regs;
+#ifdef CONFIG_PCI
+#endif
+
+	strcpy(tmp, bkm_a4t_revision);
+	printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
+	if (cs->typ == ISDN_CTYPE_BKM_A4T) {
+		cs->subtyp = BKM_A4T;
+	} else
+		return (0);
+
+#ifdef CONFIG_PCI
+	while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN,
+		PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
+		u16 sub_sys;
+		u16 sub_vendor;
+
+		sub_vendor = dev_a4t->subsystem_vendor;
+		sub_sys = dev_a4t->subsystem_device;
+		if ((sub_sys == PCI_DEVICE_ID_BERKOM_A4T) && (sub_vendor == PCI_VENDOR_ID_BERKOM)) {
+			if (pci_enable_device(dev_a4t))
+				return(0);
+			found = 1;
+			pci_memaddr = pci_resource_start(dev_a4t, 0);
+			cs->irq = dev_a4t->irq;
+			break;
+		}
+	}
+	if (!found) {
+		printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
+		return (0);
+	}
+	if (!cs->irq) {		/* IRQ range check ?? */
+		printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
+		return (0);
+	}
+	if (!pci_memaddr) {
+		printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
+		return (0);
+	}
+	cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
+	/* Check suspecious address */
+	pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
+	if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
+		printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n",
+		       CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096);
+		iounmap((void *) cs->hw.ax.base);
+		cs->hw.ax.base = 0;
+		return (0);
+	}
+	cs->hw.ax.isac_adr = cs->hw.ax.base + PO_OFFSET;
+	cs->hw.ax.jade_adr = cs->hw.ax.base + PO_OFFSET;
+	cs->hw.ax.isac_ale = GCS_1;
+	cs->hw.ax.jade_ale = GCS_3;
+#else
+	printk(KERN_WARNING "HiSax: %s: NO_PCI_BIOS\n", CardType[card->typ]);
+	printk(KERN_WARNING "HiSax: %s: unable to configure\n", CardType[card->typ]);
+	return (0);
+#endif				/* CONFIG_PCI */
+	printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
+	       CardType[card->typ], cs->hw.ax.base, cs->irq);
+
+	setup_isac(cs);
+	cs->readisac = &ReadISAC;
+	cs->writeisac = &WriteISAC;
+	cs->readisacfifo = &ReadISACfifo;
+	cs->writeisacfifo = &WriteISACfifo;
+	cs->BC_Read_Reg = &ReadJADE;
+	cs->BC_Write_Reg = &WriteJADE;
+	cs->BC_Send_Data = &jade_fill_fifo;
+	cs->cardmsg = &BKM_card_msg;
+	cs->irq_func = &bkm_interrupt;
+	cs->irq_flags |= SA_SHIRQ;
+	ISACVersion(cs, "Telekom A4T:");
+	/* Jade version */
+	JadeVersion(cs, "Telekom A4T:");
+	return (1);
+}