Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

9 files changed, 11 insertions, 11 deletions

diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 3147020d188b..0cb0546ead88 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -146,7 +146,7 @@ reset_hfcpci(struct IsdnCardState *cs)
 	/* D- and monitor/CI channel are not enabled */
 	/* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
 	/* STIO2 is used as data input, B1+B2 from IOM->ST */
-	/* ST B-channel send disabled -> continous 1s */
+	/* ST B-channel send disabled -> continuous 1s */
 	/* The IOM slots are always enabled */
 	cs->hw.hfcpci.conn = 0x36;	/* set data flow directions */
 	Write_hfc(cs, HFCPCI_CONNECT, cs->hw.hfcpci.conn);
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 1235b7131ae1..156d7c63d944 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -399,7 +399,7 @@ reset_hfcsx(struct IsdnCardState *cs)
 	/* D- and monitor/CI channel are not enabled */
 	/* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
 	/* STIO2 is used as data input, B1+B2 from IOM->ST */
-	/* ST B-channel send disabled -> continous 1s */
+	/* ST B-channel send disabled -> continuous 1s */
 	/* The IOM slots are always enabled */
 	cs->hw.hfcsx.conn = 0x36;	/* set data flow directions */
 	Write_hfc(cs, HFCSX_CONNECT, cs->hw.hfcsx.conn);
diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h
index e79f56568d30..2f581c0b4693 100644
--- a/drivers/isdn/hisax/hfc_usb.h
+++ b/drivers/isdn/hisax/hfc_usb.h
@@ -126,7 +126,7 @@ static struct hfcusb_symbolic_list urb_errlist[] = {
 
 
 /*
- * device dependant information to support different
+ * device dependent information to support different
  * ISDN Ta's using the HFC-S USB chip
  */
 
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index cc6ee2d39880..8e2fd02ecce0 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -1595,7 +1595,7 @@ l3dss1_setup(struct l3_process *pc, u_char pr, void *arg)
 	 * Bearer Capabilities
 	 */
 	p = skb->data;
-	/* only the first occurence 'll be detected ! */
+	/* only the first occurrence 'll be detected ! */
 	if ((p = findie(p, skb->len, 0x04, 0))) {
 		if ((p[1] < 2) || (p[1] > 11))
 			err = 1;
@@ -2161,7 +2161,7 @@ static void l3dss1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3dss1_cmd_global(struct PStack *st, isdn_ctrl *ic)
diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c
index f9584491fe8e..7b229c0ce115 100644
--- a/drivers/isdn/hisax/l3ni1.c
+++ b/drivers/isdn/hisax/l3ni1.c
@@ -1449,7 +1449,7 @@ l3ni1_setup(struct l3_process *pc, u_char pr, void *arg)
 	 * Bearer Capabilities
 	 */
 	p = skb->data;
-	/* only the first occurence 'll be detected ! */
+	/* only the first occurrence 'll be detected ! */
 	if ((p = findie(p, skb->len, 0x04, 0))) {
 		if ((p[1] < 2) || (p[1] > 11))
 			err = 1;
@@ -2017,7 +2017,7 @@ static void l3ni1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3ni1_cmd_global(struct PStack *st, isdn_ctrl *ic)
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 2344e7b33448..a1b89524b505 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -167,7 +167,7 @@ static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
 		return(0);
 	}
 	/* the TJ300 and TJ320 must be detected, the IRQ handling is different
-	 * unfortunatly the chips use the same device ID, but the TJ320 has
+	 * unfortunately the chips use the same device ID, but the TJ320 has
 	 * the bit20 in status PCI cfg register set
 	 */
 	pci_read_config_dword(dev_netjet, 0x04, &cfg);
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index e56e5af889b6..ed4bc564dc63 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -124,7 +124,7 @@ static void usb_b_out(struct st5481_bcs *bcs,int buf_nr)
 }
 
 /*
- * Start transfering (flags or data) on the B channel, since
+ * Start transferring (flags or data) on the B channel, since
  * FIFO counters has been set to a non-zero value.
  */
 static void st5481B_start_xfer(void *context)
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 10d41c5d73ed..159e8fa00fd6 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -470,7 +470,7 @@ void st5481_release_isocpipes(struct urb* urb[2])
 
 /*
  * Decode frames received on the B/D channel.
- * Note that this function will be called continously
+ * Note that this function will be called continuously
  * with 64Kbit/s / 16Kbit/s of data and hence it will be 
  * called 50 times per second with 20 ISOC descriptors. 
  * Called at interrupt.
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 282a4467ef19..aa25e183bf79 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -9,7 +9,7 @@
     Also inspired by ELSA PCMCIA driver 
     by Klaus Lichtenwalder <Lichtenwalder@ACM.org>
     
-    Extentions to new hisax_pcmcia by Karsten Keil
+    Extensions to new hisax_pcmcia by Karsten Keil
 
     minor changes to be compatible with kernel 2.4.x
     by Jan.Schubert@GMX.li